- Linux-stable-mirror - lists.linaro.org

Patch "ip6_tunnel: get the min mtu properly in ip6_tnl_xmit" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip6_tunnel: get the min mtu properly in ip6_tnl_xmit to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip6_tunnel-get-the-min-mtu-properly-in-ip6_tnl_xmit.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Xin Long <lucien.xin(a)gmail.com> Date: Mon, 18 Dec 2017 14:26:21 +0800 Subject: ip6_tunnel: get the min mtu properly in ip6_tnl_xmit From: Xin Long <lucien.xin(a)gmail.com> [ Upstream commit c9fefa08190fc879fb2e681035d7774e0a8c5170 ] Now it's using IPV6_MIN_MTU as the min mtu in ip6_tnl_xmit, but IPV6_MIN_MTU actually only works when the inner packet is ipv6. With IPV6_MIN_MTU for ipv4 packets, the new pmtu for inner dst couldn't be set less than 1280. It would cause tx_err and the packet to be dropped when the outer dst pmtu is close to 1280. Jianlin found it by running ipv4 traffic with the topo: (client) gre6 <---> eth1 (route) eth2 <---> gre6 (server) After changing eth2 mtu to 1300, the performance became very low, or the connection was even broken. The issue also affects ip4ip6 and ip6ip6 tunnels. So if the inner packet is ipv4, 576 should be considered as the min mtu. Note that for ip4ip6 and ip6ip6 tunnels, the inner packet can only be ipv4 or ipv6, but for gre6 tunnel, it may also be ARP. This patch using 576 as the min mtu for non-ipv6 packet works for all those cases. Reported-by: Jianlin Shi <jishi(a)redhat.com> Signed-off-by: Xin Long <lucien.xin(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/ip6_tunnel.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1131,8 +1131,13 @@ route_lookup: max_headroom += 8; mtu -= 8; } - if (mtu < IPV6_MIN_MTU) - mtu = IPV6_MIN_MTU; + if (skb->protocol == htons(ETH_P_IPV6)) { + if (mtu < IPV6_MIN_MTU) + mtu = IPV6_MIN_MTU; + } else if (mtu < 576) { + mtu = 576; + } + if (skb_dst(skb) && !t->parms.collect_md) skb_dst(skb)->ops->update_pmtu(skb_dst(skb), NULL, skb, mtu); if (skb->len - t->tun_hlen - eth_hlen > mtu && !skb_is_gso(skb)) { Patches currently in stable-queue which might be from lucien.xin(a)gmail.com are queue-4.14/ip_gre-remove-the-incorrect-mtu-limit-for-ipgre-tap.patch queue-4.14/ip6_gre-remove-the-incorrect-mtu-limit-for-ipgre-tap.patch queue-4.14/ip6_tunnel-allow-ip6gre-dev-mtu-to-be-set-below-1280.patch queue-4.14/vxlan-update-skb-dst-pmtu-on-tx-path.patch queue-4.14/ip6_tunnel-get-the-min-mtu-properly-in-ip6_tnl_xmit.patch queue-4.14/sctp-fix-the-issue-that-a-__u16-variable-may-overflow-in-sctp_ulpq_renege.patch

7 years, 6 months

1
0
0 0

Patch "ip6_tunnel: allow ip6gre dev mtu to be set below 1280" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip6_tunnel: allow ip6gre dev mtu to be set below 1280 to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip6_tunnel-allow-ip6gre-dev-mtu-to-be-set-below-1280.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Xin Long <lucien.xin(a)gmail.com> Date: Mon, 25 Dec 2017 14:45:12 +0800 Subject: ip6_tunnel: allow ip6gre dev mtu to be set below 1280 From: Xin Long <lucien.xin(a)gmail.com> [ Upstream commit 2fa771be953a17f8e0a9c39103464c2574444c62 ] Commit 582442d6d5bc ("ipv6: Allow the MTU of ipip6 tunnel to be set below 1280") fixed a mtu setting issue. It works for ipip6 tunnel. But ip6gre dev updates the mtu also with ip6_tnl_change_mtu. Since the inner packet over ip6gre can be ipv4 and it's mtu should also be allowed to set below 1280, the same issue also exists on ip6gre. This patch is to fix it by simply changing to check if parms.proto is IPPROTO_IPV6 in ip6_tnl_change_mtu instead, to make ip6gre to go to 'else' branch. Signed-off-by: Xin Long <lucien.xin(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/ip6_tunnel.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1684,11 +1684,11 @@ int ip6_tnl_change_mtu(struct net_device { struct ip6_tnl *tnl = netdev_priv(dev); - if (tnl->parms.proto == IPPROTO_IPIP) { - if (new_mtu < ETH_MIN_MTU) + if (tnl->parms.proto == IPPROTO_IPV6) { + if (new_mtu < IPV6_MIN_MTU) return -EINVAL; } else { - if (new_mtu < IPV6_MIN_MTU) + if (new_mtu < ETH_MIN_MTU) return -EINVAL; } if (new_mtu > 0xFFF8 - dev->hard_header_len) Patches currently in stable-queue which might be from lucien.xin(a)gmail.com are queue-4.14/ip_gre-remove-the-incorrect-mtu-limit-for-ipgre-tap.patch queue-4.14/ip6_gre-remove-the-incorrect-mtu-limit-for-ipgre-tap.patch queue-4.14/ip6_tunnel-allow-ip6gre-dev-mtu-to-be-set-below-1280.patch queue-4.14/vxlan-update-skb-dst-pmtu-on-tx-path.patch queue-4.14/ip6_tunnel-get-the-min-mtu-properly-in-ip6_tnl_xmit.patch queue-4.14/sctp-fix-the-issue-that-a-__u16-variable-may-overflow-in-sctp_ulpq_renege.patch

7 years, 6 months

1
0
0 0

Patch "ip6_gre: remove the incorrect mtu limit for ipgre tap" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip6_gre: remove the incorrect mtu limit for ipgre tap to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip6_gre-remove-the-incorrect-mtu-limit-for-ipgre-tap.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Xin Long <lucien.xin(a)gmail.com> Date: Mon, 18 Dec 2017 14:25:09 +0800 Subject: ip6_gre: remove the incorrect mtu limit for ipgre tap From: Xin Long <lucien.xin(a)gmail.com> [ Upstream commit 2c52129a7d74d017320804c6928de770815c5f4a ] The same fix as the patch "ip_gre: remove the incorrect mtu limit for ipgre tap" is also needed for ip6_gre. Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") Signed-off-by: Xin Long <lucien.xin(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/ip6_gre.c | 1 + 1 file changed, 1 insertion(+) --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1335,6 +1335,7 @@ static void ip6gre_tap_setup(struct net_ ether_setup(dev); + dev->max_mtu = 0; dev->netdev_ops = &ip6gre_tap_netdev_ops; dev->needs_free_netdev = true; dev->priv_destructor = ip6gre_dev_free; Patches currently in stable-queue which might be from lucien.xin(a)gmail.com are queue-4.14/ip_gre-remove-the-incorrect-mtu-limit-for-ipgre-tap.patch queue-4.14/ip6_gre-remove-the-incorrect-mtu-limit-for-ipgre-tap.patch queue-4.14/ip6_tunnel-allow-ip6gre-dev-mtu-to-be-set-below-1280.patch queue-4.14/vxlan-update-skb-dst-pmtu-on-tx-path.patch queue-4.14/ip6_tunnel-get-the-min-mtu-properly-in-ip6_tnl_xmit.patch queue-4.14/sctp-fix-the-issue-that-a-__u16-variable-may-overflow-in-sctp_ulpq_renege.patch

7 years, 6 months

1
0
0 0

Patch "Input: xen-kbdfront - do not advertise multi-touch pressure support" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: xen-kbdfront - do not advertise multi-touch pressure support to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-xen-kbdfront-do-not-advertise-multi-touch-pressure-support.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Oleksandr Andrushchenko <oleksandr_andrushchenko(a)epam.com> Date: Tue, 2 Jan 2018 09:39:25 -0800 Subject: Input: xen-kbdfront - do not advertise multi-touch pressure support From: Oleksandr Andrushchenko <oleksandr_andrushchenko(a)epam.com> [ Upstream commit 02a0d9216d4daf6a58d88642bd2da2c78c327552 ] Some user-space applications expect multi-touch pressure on contact to be reported if it is advertised in device properties. Otherwise, such applications may treat reports not as actual touches, but hovering. Currently this is only advertised, but not reported. Fix this by not advertising that ABS_MT_PRESSURE is supported. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko(a)epam.com> Signed-off-by: Andrii Chepurnyi <andrii_chepurnyi(a)epam.com> Patchwork-Id: 10140017 Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/misc/xen-kbdfront.c | 2 -- 1 file changed, 2 deletions(-) --- a/drivers/input/misc/xen-kbdfront.c +++ b/drivers/input/misc/xen-kbdfront.c @@ -326,8 +326,6 @@ static int xenkbd_probe(struct xenbus_de 0, width, 0, 0); input_set_abs_params(mtouch, ABS_MT_POSITION_Y, 0, height, 0, 0); - input_set_abs_params(mtouch, ABS_MT_PRESSURE, - 0, 255, 0, 0); ret = input_mt_init_slots(mtouch, num_cont, INPUT_MT_DIRECT); if (ret) { Patches currently in stable-queue which might be from oleksandr_andrushchenko(a)epam.com are queue-4.14/input-xen-kbdfront-do-not-advertise-multi-touch-pressure-support.patch

7 years, 6 months

1
0
0 0

Patch "IB/mlx5: Fix mlx5_ib_alloc_mr error flow" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/mlx5: Fix mlx5_ib_alloc_mr error flow to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-mlx5-fix-mlx5_ib_alloc_mr-error-flow.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Nitzan Carmi <nitzanc(a)mellanox.com> Date: Tue, 26 Dec 2017 11:20:20 +0200 Subject: IB/mlx5: Fix mlx5_ib_alloc_mr error flow From: Nitzan Carmi <nitzanc(a)mellanox.com> [ Upstream commit 45e6ae7ef21b907dacb18da62d5787d74a31d860 ] ibmr.device is being set only after ib_alloc_mr() is (successfully) complete. Therefore, in case mlx5_core_create_mkey() return with error, the error flow calls mlx5_free_priv_descs() which uses ibmr.device (which doesn't exist yet), causing a NULL dereference oops. To fix this, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx5_core_create_mkey()). Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API") Signed-off-by: Max Gurtovoy <maxg(a)mellanox.com> Signed-off-by: Nitzan Carmi <nitzanc(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/mlx5/mr.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -1637,6 +1637,7 @@ struct ib_mr *mlx5_ib_alloc_mr(struct ib MLX5_SET(mkc, mkc, access_mode, mr->access_mode); MLX5_SET(mkc, mkc, umr_en, 1); + mr->ibmr.device = pd->device; err = mlx5_core_create_mkey(dev->mdev, &mr->mmkey, in, inlen); if (err) goto err_destroy_psv; Patches currently in stable-queue which might be from nitzanc(a)mellanox.com are queue-4.14/ib-mlx5-fix-mlx5_ib_alloc_mr-error-flow.patch queue-4.14/ib-mlx4-fix-mlx4_ib_alloc_mr-error-flow.patch

7 years, 6 months

1
0
0 0

Patch "IB/mlx4: Fix mlx4_ib_alloc_mr error flow" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/mlx4: Fix mlx4_ib_alloc_mr error flow to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-mlx4-fix-mlx4_ib_alloc_mr-error-flow.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Leon Romanovsky <leonro(a)mellanox.com> Date: Sun, 31 Dec 2017 15:33:14 +0200 Subject: IB/mlx4: Fix mlx4_ib_alloc_mr error flow From: Leon Romanovsky <leonro(a)mellanox.com> [ Upstream commit 5a371cf87e145b86efd32007e46146e78c1eff6d ] ibmr.device is being set only after ib_alloc_mr() is successfully complete. Therefore, in case imlx4_mr_enable() returns with error, the error flow unwinder calls to mlx4_free_priv_pages(), which uses ibmr.device. Such usage causes to NULL dereference oops and to fix it, the IB device should be set in the mr struct earlier stage (e.g. prior to calling mlx4_free_priv_pages()). Fixes: 1b2cd0fc673c ("IB/mlx4: Support the new memory registration API") Signed-off-by: Nitzan Carmi <nitzanc(a)mellanox.com> Signed-off-by: Leon Romanovsky <leonro(a)mellanox.com> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/hw/mlx4/mr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/hw/mlx4/mr.c +++ b/drivers/infiniband/hw/mlx4/mr.c @@ -406,7 +406,6 @@ struct ib_mr *mlx4_ib_alloc_mr(struct ib goto err_free_mr; mr->max_pages = max_num_sg; - err = mlx4_mr_enable(dev->dev, &mr->mmr); if (err) goto err_free_pl; @@ -417,6 +416,7 @@ struct ib_mr *mlx4_ib_alloc_mr(struct ib return &mr->ibmr; err_free_pl: + mr->ibmr.device = pd->device; mlx4_free_priv_pages(mr); err_free_mr: (void) mlx4_mr_free(dev->dev, &mr->mmr); Patches currently in stable-queue which might be from leonro(a)mellanox.com are queue-4.14/ib-mlx4-fix-mlx4_ib_alloc_mr-error-flow.patch queue-4.14/rdma-netlink-fix-locking-around-__ib_get_device_by_index.patch

7 years, 6 months

1
0
0 0

Patch "IB/ipoib: Fix race condition in neigh creation" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Fix race condition in neigh creation to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-fix-race-condition-in-neigh-creation.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Erez Shitrit <erezsh(a)mellanox.com> Date: Sun, 31 Dec 2017 15:33:15 +0200 Subject: IB/ipoib: Fix race condition in neigh creation From: Erez Shitrit <erezsh(a)mellanox.com> [ Upstream commit 16ba3defb8bd01a9464ba4820a487f5b196b455b ] When using enhanced mode for IPoIB, two threads may execute xmit in parallel to two different TX queues while the target is the same. In this case, both of them will add the same neighbor to the path's neigh link list and we might see the following message: list_add double add: new=ffff88024767a348, prev=ffff88024767a348... WARNING: lib/list_debug.c:31__list_add_valid+0x4e/0x70 ipoib_start_xmit+0x477/0x680 [ib_ipoib] dev_hard_start_xmit+0xb9/0x3e0 sch_direct_xmit+0xf9/0x250 __qdisc_run+0x176/0x5d0 __dev_queue_xmit+0x1f5/0xb10 __dev_queue_xmit+0x55/0xb10 Analysis: Two SKB are scheduled to be transmitted from two cores. In ipoib_start_xmit, both gets NULL when calling ipoib_neigh_get. Two calls to neigh_add_path are made. One thread takes the spin-lock and calls ipoib_neigh_alloc which creates the neigh structure, then (after the __path_find) the neigh is added to the path's neigh link list. When the second thread enters the critical section it also calls ipoib_neigh_alloc but in this case it gets the already allocated ipoib_neigh structure, which is already linked to the path's neigh link list and adds it again to the list. Which beside of triggering the list, it creates a loop in the linked list. This loop leads to endless loop inside path_rec_completion. Solution: Check list_empty(&neigh->list) before adding to the list. Add a similar fix in "ipoib_multicast.c::ipoib_mcast_send" Fixes: b63b70d87741 ('IPoIB: Use a private hash table for path lookup in xmit path') Signed-off-by: Erez Shitrit <erezsh(a)mellanox.com> Reviewed-by: Alex Vesker <valex(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 25 ++++++++++++++++++------- drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 5 ++++- 2 files changed, 22 insertions(+), 8 deletions(-) --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -903,8 +903,8 @@ static int path_rec_start(struct net_dev return 0; } -static void neigh_add_path(struct sk_buff *skb, u8 *daddr, - struct net_device *dev) +static struct ipoib_neigh *neigh_add_path(struct sk_buff *skb, u8 *daddr, + struct net_device *dev) { struct ipoib_dev_priv *priv = ipoib_priv(dev); struct rdma_netdev *rn = netdev_priv(dev); @@ -918,7 +918,15 @@ static void neigh_add_path(struct sk_buf spin_unlock_irqrestore(&priv->lock, flags); ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); - return; + return NULL; + } + + /* To avoid race condition, make sure that the + * neigh will be added only once. + */ + if (unlikely(!list_empty(&neigh->list))) { + spin_unlock_irqrestore(&priv->lock, flags); + return neigh; } path = __path_find(dev, daddr + 4); @@ -957,7 +965,7 @@ static void neigh_add_path(struct sk_buf path->ah->last_send = rn->send(dev, skb, path->ah->ah, IPOIB_QPN(daddr)); ipoib_neigh_put(neigh); - return; + return NULL; } } else { neigh->ah = NULL; @@ -974,7 +982,7 @@ static void neigh_add_path(struct sk_buf spin_unlock_irqrestore(&priv->lock, flags); ipoib_neigh_put(neigh); - return; + return NULL; err_path: ipoib_neigh_free(neigh); @@ -984,6 +992,8 @@ err_drop: spin_unlock_irqrestore(&priv->lock, flags); ipoib_neigh_put(neigh); + + return NULL; } static void unicast_arp_send(struct sk_buff *skb, struct net_device *dev, @@ -1092,8 +1102,9 @@ static int ipoib_start_xmit(struct sk_bu case htons(ETH_P_TIPC): neigh = ipoib_neigh_get(dev, phdr->hwaddr); if (unlikely(!neigh)) { - neigh_add_path(skb, phdr->hwaddr, dev); - return NETDEV_TX_OK; + neigh = neigh_add_path(skb, phdr->hwaddr, dev); + if (likely(!neigh)) + return NETDEV_TX_OK; } break; case htons(ETH_P_ARP): --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -816,7 +816,10 @@ void ipoib_mcast_send(struct net_device spin_lock_irqsave(&priv->lock, flags); if (!neigh) { neigh = ipoib_neigh_alloc(daddr, dev); - if (neigh) { + /* Make sure that the neigh will be added only + * once to mcast list. + */ + if (neigh && list_empty(&neigh->list)) { kref_get(&mcast->ah->ref); neigh->ah = mcast->ah; list_add_tail(&neigh->list, &mcast->neigh_list); Patches currently in stable-queue which might be from erezsh(a)mellanox.com are queue-4.14/ib-ipoib-fix-race-condition-in-neigh-creation.patch

7 years, 6 months

1
0
0 0

Patch "ia64, sched/cputime: Fix build error if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ia64, sched/cputime: Fix build error if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ia64-sched-cputime-fix-build-error-if-config_virt_cpu_accounting_native-y.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Valentin Ilie <valentin.ilie(a)gmail.com> Date: Fri, 5 Jan 2018 23:12:59 +0000 Subject: ia64, sched/cputime: Fix build error if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y From: Valentin Ilie <valentin.ilie(a)gmail.com> [ Upstream commit 7729bebc619307a0233c86f8585a4bf3eadc7ce4 ] Remove the extra parenthesis. This bug was introduced by: e2339a4caa5e: ("ia64: Convert vtime to use nsec units directly") Signed-off-by: Valentin Ilie <valentin.ilie(a)gmail.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: fenghua.yu(a)intel.com Cc: linux-ia64(a)vger.kernel.org Cc: tony.luck(a)intel.com Link: http://lkml.kernel.org/r/1515193979-24873-1-git-send-email-valentin.ilie@gm… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/ia64/kernel/time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -88,7 +88,7 @@ void vtime_flush(struct task_struct *tsk } if (ti->softirq_time) { - delta = cycle_to_nsec(ti->softirq_time)); + delta = cycle_to_nsec(ti->softirq_time); account_system_index_time(tsk, delta, CPUTIME_SOFTIRQ); } Patches currently in stable-queue which might be from valentin.ilie(a)gmail.com are queue-4.14/ia64-sched-cputime-fix-build-error-if-config_virt_cpu_accounting_native-y.patch

7 years, 6 months

1
0
0 0

Patch "i915: Reject CCS modifiers for pipe C on Geminilake" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled i915: Reject CCS modifiers for pipe C on Geminilake to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: i915-reject-ccs-modifiers-for-pipe-c-on-geminilake.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Gabriel Krisman Bertazi <krisman(a)collabora.co.uk> Date: Tue, 19 Dec 2017 22:24:10 -0200 Subject: i915: Reject CCS modifiers for pipe C on Geminilake From: Gabriel Krisman Bertazi <krisman(a)collabora.co.uk> [ Upstream commit 8bc0d7ac934b6f2d0dc8f38a3104d281c9db1e98 ] Current code advertises (on the modifiers blob property) support for CCS modifier for pipe C on GLK, only to reject it later when validating the request before the atomic commit. This fixes the tests igt@kms_ccs@pipe-c-*, which should skip on GLK for pipe C (see bug 104096). A relevant discussion is archived at: https://lists.freedesktop.org/archives/intel-gfx/2017-December/150646.html Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104096 Signed-off-by: Gabriel Krisman Bertazi <krisman(a)collabora.co.uk> Cc: Ben Widawsky <ben(a)bwidawsk.net> Reviewed-by: Ben Widawsky <ben(a)bwidawsk.net> Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171220002410.5604-1-krisman… (cherry picked from commit f0cbd8bd877f3d8c5b80a6b1add9ca9010d7f9d8) Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13240,7 +13240,7 @@ intel_primary_plane_create(struct drm_i9 primary->frontbuffer_bit = INTEL_FRONTBUFFER_PRIMARY(pipe); primary->check_plane = intel_check_primary_plane; - if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) { + if (INTEL_GEN(dev_priv) >= 10) { intel_primary_formats = skl_primary_formats; num_formats = ARRAY_SIZE(skl_primary_formats); modifiers = skl_format_modifiers_ccs; Patches currently in stable-queue which might be from krisman(a)collabora.co.uk are queue-4.14/i915-reject-ccs-modifiers-for-pipe-c-on-geminilake.patch

7 years, 6 months

1
0
0 0

Patch "i40e/i40evf: Account for frags split over multiple descriptors in check linearize" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled i40e/i40evf: Account for frags split over multiple descriptors in check linearize to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: i40e-i40evf-account-for-frags-split-over-multiple-descriptors-in-check-linearize.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Feb 28 16:23:28 CET 2018 From: Alexander Duyck <alexander.h.duyck(a)intel.com> Date: Fri, 8 Dec 2017 10:55:04 -0800 Subject: i40e/i40evf: Account for frags split over multiple descriptors in check linearize From: Alexander Duyck <alexander.h.duyck(a)intel.com> [ Upstream commit 248de22e638f10bd5bfc7624a357f940f66ba137 ] The original code for __i40e_chk_linearize didn't take into account the fact that if a fragment is 16K in size or larger it has to be split over 2 descriptors and the smaller of those 2 descriptors will be on the trailing edge of the transmit. As a result we can get into situations where we didn't catch requests that could result in a Tx hang. This patch takes care of that by subtracting the length of all but the trailing edge of the stale fragment before we test for sum. By doing this we can guarantee that we have all cases covered, including the case of a fragment that spans multiple descriptors. We don't need to worry about checking the inner portions of this since 12K is the maximum aligned DMA size and that is larger than any MSS will ever be since the MTU limit for jumbos is something on the order of 9K. Signed-off-by: Alexander Duyck <alexander.h.duyck(a)intel.com> Tested-by: Andrew Bowers <andrewx.bowers(a)intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 26 +++++++++++++++++++++++--- drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 26 +++++++++++++++++++++++--- 2 files changed, 46 insertions(+), 6 deletions(-) --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -3048,10 +3048,30 @@ bool __i40e_chk_linearize(struct sk_buff /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -3059,7 +3079,7 @@ bool __i40e_chk_linearize(struct sk_buff if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; --- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c @@ -2014,10 +2014,30 @@ bool __i40evf_chk_linearize(struct sk_bu /* Walk through fragments adding latest fragment, testing it, and * then removing stale fragments from the sum. */ - stale = &skb_shinfo(skb)->frags[0]; - for (;;) { + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + sum += skb_frag_size(frag++); + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(stale->page_offset) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + /* if sum is negative we failed to make sufficient progress */ if (sum < 0) return true; @@ -2025,7 +2045,7 @@ bool __i40evf_chk_linearize(struct sk_bu if (!nr_frags--) break; - sum -= skb_frag_size(stale++); + sum -= stale_size; } return false; Patches currently in stable-queue which might be from alexander.h.duyck(a)intel.com are queue-4.14/i40e-i40evf-account-for-frags-split-over-multiple-descriptors-in-check-linearize.patch

7 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror