This is a note to let you know that I've just added the patch titled
USB: serial: option: add support for Telit ME910 PID 0x1101
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-serial-option-add-support-for-telit-me910-pid-0x1101.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 08933099e6404f588f81c2050bfec7313e06eeaf Mon Sep 17 00:00:00 2001
From: Daniele Palmas <dnlplm(a)gmail.com>
Date: Thu, 14 Dec 2017 16:54:45 +0100
Subject: USB: serial: option: add support for Telit ME910 PID 0x1101
From: Daniele Palmas <dnlplm(a)gmail.com>
commit 08933099e6404f588f81c2050bfec7313e06eeaf upstream.
This patch adds support for PID 0x1101 of Telit ME910.
Signed-off-by: Daniele Palmas <dnlplm(a)gmail.com>
Signed-off-by: Johan Hovold <johan(a)kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/serial/option.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -276,6 +276,7 @@ static void option_instat_callback(struc
#define TELIT_PRODUCT_LE922_USBCFG3 0x1043
#define TELIT_PRODUCT_LE922_USBCFG5 0x1045
#define TELIT_PRODUCT_ME910 0x1100
+#define TELIT_PRODUCT_ME910_DUAL_MODEM 0x1101
#define TELIT_PRODUCT_LE920 0x1200
#define TELIT_PRODUCT_LE910 0x1201
#define TELIT_PRODUCT_LE910_USBCFG4 0x1206
@@ -644,6 +645,11 @@ static const struct option_blacklist_inf
.reserved = BIT(1) | BIT(3),
};
+static const struct option_blacklist_info telit_me910_dual_modem_blacklist = {
+ .sendsetup = BIT(0),
+ .reserved = BIT(3),
+};
+
static const struct option_blacklist_info telit_le910_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(2),
@@ -1242,6 +1248,8 @@ static const struct usb_device_id option
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
+ .driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
Patches currently in stable-queue which might be from dnlplm(a)gmail.com are
queue-3.18/usb-serial-option-add-support-for-telit-me910-pid-0x1101.patch
This is a note to let you know that I've just added the patch titled
usb: add RESET_RESUME for ELSA MicroLink 56K
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-add-reset_resume-for-elsa-microlink-56k.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From b9096d9f15c142574ebebe8fbb137012bb9d99c2 Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oneukum(a)suse.com>
Date: Tue, 12 Dec 2017 16:11:30 +0100
Subject: usb: add RESET_RESUME for ELSA MicroLink 56K
From: Oliver Neukum <oneukum(a)suse.com>
commit b9096d9f15c142574ebebe8fbb137012bb9d99c2 upstream.
This modem needs this quirk to operate. It produces timeouts when
resumed without reset.
Signed-off-by: Oliver Neukum <oneukum(a)suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/core/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -148,6 +148,9 @@ static const struct usb_device_id usb_qu
/* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */
{ USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM },
+ /* ELSA MicroLink 56K */
+ { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */
{ USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM },
Patches currently in stable-queue which might be from oneukum(a)suse.com are
queue-3.18/usb-add-reset_resume-for-elsa-microlink-56k.patch
This is a note to let you know that I've just added the patch titled
usb: Add device quirk for Logitech HD Pro Webcam C925e
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usb-add-device-quirk-for-logitech-hd-pro-webcam-c925e.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 7f038d256c723dd390d2fca942919573995f4cfd Mon Sep 17 00:00:00 2001
From: Dmitry Fleytman Dmitry Fleytman <dmitry.fleytman(a)gmail.com>
Date: Tue, 19 Dec 2017 06:02:04 +0200
Subject: usb: Add device quirk for Logitech HD Pro Webcam C925e
From: Dmitry Fleytman Dmitry Fleytman <dmitry.fleytman(a)gmail.com>
commit 7f038d256c723dd390d2fca942919573995f4cfd upstream.
Commit e0429362ab15
("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e")
introduced quirk to workaround an issue with some Logitech webcams.
There is one more model that has the same issue - C925e, so applying
the same quirk as well.
See aforementioned commit message for detailed explanation of the problem.
Signed-off-by: Dmitry Fleytman <dmitry.fleytman(a)gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/core/quirks.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -53,10 +53,11 @@ static const struct usb_device_id usb_qu
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Logitech HD Pro Webcams C920, C920-C and C930e */
+ /* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
+ { USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT },
/* Logitech ConferenceCam CC3000e */
{ USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
Patches currently in stable-queue which might be from dmitry.fleytman(a)gmail.com are
queue-3.18/usb-add-device-quirk-for-logitech-hd-pro-webcam-c925e.patch
If we are asked for number of entries of an offset bigger than the
sg list we should not crash.
Cc: stable(a)vger.kernel.org
Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com>
---
drivers/staging/ccree/ssi_buffer_mgr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/ccree/ssi_buffer_mgr.c b/drivers/staging/ccree/ssi_buffer_mgr.c
index 33b9709..cb3e235 100644
--- a/drivers/staging/ccree/ssi_buffer_mgr.c
+++ b/drivers/staging/ccree/ssi_buffer_mgr.c
@@ -94,7 +94,7 @@ static unsigned int cc_get_sgl_nents(struct device *dev,
{
unsigned int nents = 0;
- while (nbytes) {
+ while (nbytes && sg_list) {
if (sg_list->length) {
nents++;
/* get the number of bytes in the last entry */
--
2.7.4
If we ran out of DMA pool buffers, we get into the unmap
code path with a NULL before. Deal with this by checking
the virtual mapping is not NULL.
Cc: stable(a)vger.kernel.org
Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com>
---
drivers/staging/ccree/ssi_buffer_mgr.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/ccree/ssi_buffer_mgr.c b/drivers/staging/ccree/ssi_buffer_mgr.c
index 795f403..33b9709 100644
--- a/drivers/staging/ccree/ssi_buffer_mgr.c
+++ b/drivers/staging/ccree/ssi_buffer_mgr.c
@@ -465,7 +465,8 @@ void cc_unmap_blkcipher_request(struct device *dev, void *ctx,
DMA_TO_DEVICE);
}
/* Release pool */
- if (req_ctx->dma_buf_type == CC_DMA_BUF_MLLI) {
+ if (req_ctx->dma_buf_type == CC_DMA_BUF_MLLI &&
+ req_ctx->mlli_params.mlli_virt_addr) {
dma_pool_free(req_ctx->mlli_params.curr_pool,
req_ctx->mlli_params.mlli_virt_addr,
req_ctx->mlli_params.mlli_dma_addr);
--
2.7.4
This is a note to let you know that I've just added the patch titled
usbip: stub: stop printing kernel pointer addresses in messages
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
usbip-stub-stop-printing-kernel-pointer-addresses-in-messages.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 248a22044366f588d46754c54dfe29ffe4f8b4df Mon Sep 17 00:00:00 2001
From: Shuah Khan <shuahkh(a)osg.samsung.com>
Date: Mon, 18 Dec 2017 17:23:37 -0700
Subject: usbip: stub: stop printing kernel pointer addresses in messages
From: Shuah Khan <shuahkh(a)osg.samsung.com>
commit 248a22044366f588d46754c54dfe29ffe4f8b4df upstream.
Remove and/or change debug, info. and error messages to not print
kernel pointer addresses.
Signed-off-by: Shuah Khan <shuahkh(a)osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/usb/usbip/stub_main.c | 5 +++--
drivers/usb/usbip/stub_rx.c | 7 ++-----
drivers/usb/usbip/stub_tx.c | 6 +++---
3 files changed, 8 insertions(+), 10 deletions(-)
--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -252,11 +252,12 @@ void stub_device_cleanup_urbs(struct stu
struct stub_priv *priv;
struct urb *urb;
- dev_dbg(&sdev->udev->dev, "free sdev %p\n", sdev);
+ dev_dbg(&sdev->udev->dev, "Stub device cleaning up urbs\n");
while ((priv = stub_priv_pop(sdev))) {
urb = priv->urb;
- dev_dbg(&sdev->udev->dev, "free urb %p\n", urb);
+ dev_dbg(&sdev->udev->dev, "free urb seqnum %lu\n",
+ priv->seqnum);
usb_kill_urb(urb);
kmem_cache_free(stub_priv_cache, priv);
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -225,9 +225,6 @@ static int stub_recv_cmd_unlink(struct s
if (priv->seqnum != pdu->u.cmd_unlink.seqnum)
continue;
- dev_info(&priv->urb->dev->dev, "unlink urb %p\n",
- priv->urb);
-
/*
* This matched urb is not completed yet (i.e., be in
* flight in usb hcd hardware/driver). Now we are
@@ -266,8 +263,8 @@ static int stub_recv_cmd_unlink(struct s
ret = usb_unlink_urb(priv->urb);
if (ret != -EINPROGRESS)
dev_err(&priv->urb->dev->dev,
- "failed to unlink a urb %p, ret %d\n",
- priv->urb, ret);
+ "failed to unlink a urb # %lu, ret %d\n",
+ priv->seqnum, ret);
return 0;
}
--- a/drivers/usb/usbip/stub_tx.c
+++ b/drivers/usb/usbip/stub_tx.c
@@ -102,7 +102,7 @@ void stub_complete(struct urb *urb)
/* link a urb to the queue of tx. */
spin_lock_irqsave(&sdev->priv_lock, flags);
if (sdev->ud.tcp_socket == NULL) {
- usbip_dbg_stub_tx("ignore urb for closed connection %p", urb);
+ usbip_dbg_stub_tx("ignore urb for closed connection\n");
/* It will be freed in stub_device_cleanup_urbs(). */
} else if (priv->unlinking) {
stub_enqueue_ret_unlink(sdev, priv->seqnum, urb->status);
@@ -204,8 +204,8 @@ static int stub_send_ret_submit(struct s
/* 1. setup usbip_header */
setup_ret_submit_pdu(&pdu_header, urb);
- usbip_dbg_stub_tx("setup txdata seqnum: %d urb: %p\n",
- pdu_header.base.seqnum, urb);
+ usbip_dbg_stub_tx("setup txdata seqnum: %d\n",
+ pdu_header.base.seqnum);
usbip_header_correct_endian(&pdu_header, 1);
iov[iovnum].iov_base = &pdu_header;
Patches currently in stable-queue which might be from shuahkh(a)osg.samsung.com are
queue-4.9/usbip-vhci-stop-printing-kernel-pointer-addresses-in-messages.patch
queue-4.9/usbip-fix-usbip-bind-writing-random-string-after-command-in-match_busid.patch
queue-4.9/usbip-prevent-leaking-socket-pointer-address-in-messages.patch
queue-4.9/usbip-stub-stop-printing-kernel-pointer-addresses-in-messages.patch