- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] FAILED: patch "[PATCH] target: Avoid early CMD_T_PRE_EXECUTE failures during" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1c21a48055a67ceb693e9c2587824a8de60a217c Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 22:19:26 -0800 Subject: [PATCH] target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK This patch fixes bug where early se_cmd exceptions that occur before backend execution can result in use-after-free if/when a subsequent ABORT_TASK occurs for the same tag. Since an early se_cmd exception will have had se_cmd added to se_session->sess_cmd_list via target_get_sess_cmd(), it will not have CMD_T_COMPLETE set by the usual target_complete_cmd() backend completion path. This causes a subsequent ABORT_TASK + __target_check_io_state() to signal ABORT_TASK should proceed. As core_tmr_abort_task() executes, it will bring the outstanding se_cmd->cmd_kref count down to zero releasing se_cmd, after se_cmd has already been queued with error status into fabric driver response path code. To address this bug, introduce a CMD_T_PRE_EXECUTE bit that is set at target_get_sess_cmd() time, and cleared immediately before backend driver dispatch in target_execute_cmd() once CMD_T_ACTIVE is set. Then, check CMD_T_PRE_EXECUTE within __target_check_io_state() to determine when an early exception has occured, and avoid aborting this se_cmd since it will have already been queued into fabric driver response path code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.14+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 61909b23e959..9c7bc1ca341a 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -133,6 +133,15 @@ static bool __target_check_io_state(struct se_cmd *se_cmd, spin_unlock(&se_cmd->t_state_lock); return false; } + if (se_cmd->transport_state & CMD_T_PRE_EXECUTE) { + if (se_cmd->scsi_status) { + pr_debug("Attempted to abort io tag: %llu early failure" + " status: 0x%02x\n", se_cmd->tag, + se_cmd->scsi_status); + spin_unlock(&se_cmd->t_state_lock); + return false; + } + } if (sess->sess_tearing_down || se_cmd->cmd_wait_set) { pr_debug("Attempted to abort io tag: %llu already shutdown," " skipping\n", se_cmd->tag); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0e89db84b200..58caacd54a3b 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1975,6 +1975,7 @@ void target_execute_cmd(struct se_cmd *cmd) } cmd->t_state = TRANSPORT_PROCESSING; + cmd->transport_state &= ~CMD_T_PRE_EXECUTE; cmd->transport_state |= CMD_T_ACTIVE | CMD_T_SENT; spin_unlock_irq(&cmd->t_state_lock); @@ -2667,6 +2668,7 @@ int target_get_sess_cmd(struct se_cmd *se_cmd, bool ack_kref) ret = -ESHUTDOWN; goto out; } + se_cmd->transport_state |= CMD_T_PRE_EXECUTE; list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list); out: spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index d3139a95ea77..ccf501b8359c 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -490,6 +490,7 @@ struct se_cmd { #define CMD_T_STOP (1 << 5) #define CMD_T_TAS (1 << 10) #define CMD_T_FABRIC_STOP (1 << 11) +#define CMD_T_PRE_EXECUTE (1 << 12) spinlock_t t_state_lock; struct kref cmd_kref; struct completion t_transport_stop_comp;

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref" failed to apply to 3.18-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 3.18-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ae072726f6109bb1c94841d6fb3a82dde298ea85 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 12:32:59 -0700 Subject: [PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref Since commit 59b6986dbf fixed a potential NULL pointer dereference by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the se_tmr_req is currently leaked by iscsit_free_cmd() because no iscsi_cmd->se_cmd.se_tfo was associated. To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other TMR and call transport_init_se_cmd() + target_get_sess_cmd() to setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2. This will ensure normal release operation once se_cmd->cmd_kref reaches zero and target_release_cmd_kref() is invoked, se_tmr_req will be released via existing target_free_cmd_mem() and core_tmr_release_req() code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 541f66a875fc..048d4227327c 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1955,7 +1955,6 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, struct iscsi_tmr_req *tmr_req; struct iscsi_tm *hdr; int out_of_order_cmdsn = 0, ret; - bool sess_ref = false; u8 function, tcm_function = TMR_UNKNOWN; hdr = (struct iscsi_tm *) buf; @@ -1988,22 +1987,23 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, cmd->data_direction = DMA_NONE; cmd->tmr_req = kzalloc(sizeof(*cmd->tmr_req), GFP_KERNEL); - if (!cmd->tmr_req) + if (!cmd->tmr_req) { return iscsit_add_reject_cmd(cmd, ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf); + } + + transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, + conn->sess->se_sess, 0, DMA_NONE, + TCM_SIMPLE_TAG, cmd->sense_buffer + 2); + + target_get_sess_cmd(&cmd->se_cmd, true); /* * TASK_REASSIGN for ERL=2 / connection stays inside of * LIO-Target $FABRIC_MOD */ if (function != ISCSI_TM_FUNC_TASK_REASSIGN) { - transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, - conn->sess->se_sess, 0, DMA_NONE, - TCM_SIMPLE_TAG, cmd->sense_buffer + 2); - - target_get_sess_cmd(&cmd->se_cmd, true); - sess_ref = true; tcm_function = iscsit_convert_tmf(function); if (tcm_function == TMR_UNKNOWN) { pr_err("Unknown iSCSI TMR Function:" @@ -2119,12 +2119,8 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, * For connection recovery, this is also the default action for * TMR TASK_REASSIGN. */ - if (sess_ref) { - pr_debug("Handle TMR, using sess_ref=true check\n"); - target_put_sess_cmd(&cmd->se_cmd); - } - iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state); + target_put_sess_cmd(&cmd->se_cmd); return 0; } EXPORT_SYMBOL(iscsit_handle_task_mgt_cmd);

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ae072726f6109bb1c94841d6fb3a82dde298ea85 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 12:32:59 -0700 Subject: [PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref Since commit 59b6986dbf fixed a potential NULL pointer dereference by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the se_tmr_req is currently leaked by iscsit_free_cmd() because no iscsi_cmd->se_cmd.se_tfo was associated. To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other TMR and call transport_init_se_cmd() + target_get_sess_cmd() to setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2. This will ensure normal release operation once se_cmd->cmd_kref reaches zero and target_release_cmd_kref() is invoked, se_tmr_req will be released via existing target_free_cmd_mem() and core_tmr_release_req() code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 541f66a875fc..048d4227327c 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1955,7 +1955,6 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, struct iscsi_tmr_req *tmr_req; struct iscsi_tm *hdr; int out_of_order_cmdsn = 0, ret; - bool sess_ref = false; u8 function, tcm_function = TMR_UNKNOWN; hdr = (struct iscsi_tm *) buf; @@ -1988,22 +1987,23 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, cmd->data_direction = DMA_NONE; cmd->tmr_req = kzalloc(sizeof(*cmd->tmr_req), GFP_KERNEL); - if (!cmd->tmr_req) + if (!cmd->tmr_req) { return iscsit_add_reject_cmd(cmd, ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf); + } + + transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, + conn->sess->se_sess, 0, DMA_NONE, + TCM_SIMPLE_TAG, cmd->sense_buffer + 2); + + target_get_sess_cmd(&cmd->se_cmd, true); /* * TASK_REASSIGN for ERL=2 / connection stays inside of * LIO-Target $FABRIC_MOD */ if (function != ISCSI_TM_FUNC_TASK_REASSIGN) { - transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, - conn->sess->se_sess, 0, DMA_NONE, - TCM_SIMPLE_TAG, cmd->sense_buffer + 2); - - target_get_sess_cmd(&cmd->se_cmd, true); - sess_ref = true; tcm_function = iscsit_convert_tmf(function); if (tcm_function == TMR_UNKNOWN) { pr_err("Unknown iSCSI TMR Function:" @@ -2119,12 +2119,8 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, * For connection recovery, this is also the default action for * TMR TASK_REASSIGN. */ - if (sess_ref) { - pr_debug("Handle TMR, using sess_ref=true check\n"); - target_put_sess_cmd(&cmd->se_cmd); - } - iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state); + target_put_sess_cmd(&cmd->se_cmd); return 0; } EXPORT_SYMBOL(iscsit_handle_task_mgt_cmd);

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From ae072726f6109bb1c94841d6fb3a82dde298ea85 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger <nab(a)linux-iscsi.org> Date: Fri, 27 Oct 2017 12:32:59 -0700 Subject: [PATCH] iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref Since commit 59b6986dbf fixed a potential NULL pointer dereference by allocating a se_tmr_req for ISCSI_TM_FUNC_TASK_REASSIGN, the se_tmr_req is currently leaked by iscsit_free_cmd() because no iscsi_cmd->se_cmd.se_tfo was associated. To address this, treat ISCSI_TM_FUNC_TASK_REASSIGN like any other TMR and call transport_init_se_cmd() + target_get_sess_cmd() to setup iscsi_cmd->se_cmd.se_tfo with se_cmd->cmd_kref of 2. This will ensure normal release operation once se_cmd->cmd_kref reaches zero and target_release_cmd_kref() is invoked, se_tmr_req will be released via existing target_free_cmd_mem() and core_tmr_release_req() code. Reported-by: Donald White <dew(a)datera.io> Cc: Donald White <dew(a)datera.io> Cc: Mike Christie <mchristi(a)redhat.com> Cc: Hannes Reinecke <hare(a)suse.com> Cc: stable(a)vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab(a)linux-iscsi.org> diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 541f66a875fc..048d4227327c 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1955,7 +1955,6 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, struct iscsi_tmr_req *tmr_req; struct iscsi_tm *hdr; int out_of_order_cmdsn = 0, ret; - bool sess_ref = false; u8 function, tcm_function = TMR_UNKNOWN; hdr = (struct iscsi_tm *) buf; @@ -1988,22 +1987,23 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, cmd->data_direction = DMA_NONE; cmd->tmr_req = kzalloc(sizeof(*cmd->tmr_req), GFP_KERNEL); - if (!cmd->tmr_req) + if (!cmd->tmr_req) { return iscsit_add_reject_cmd(cmd, ISCSI_REASON_BOOKMARK_NO_RESOURCES, buf); + } + + transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, + conn->sess->se_sess, 0, DMA_NONE, + TCM_SIMPLE_TAG, cmd->sense_buffer + 2); + + target_get_sess_cmd(&cmd->se_cmd, true); /* * TASK_REASSIGN for ERL=2 / connection stays inside of * LIO-Target $FABRIC_MOD */ if (function != ISCSI_TM_FUNC_TASK_REASSIGN) { - transport_init_se_cmd(&cmd->se_cmd, &iscsi_ops, - conn->sess->se_sess, 0, DMA_NONE, - TCM_SIMPLE_TAG, cmd->sense_buffer + 2); - - target_get_sess_cmd(&cmd->se_cmd, true); - sess_ref = true; tcm_function = iscsit_convert_tmf(function); if (tcm_function == TMR_UNKNOWN) { pr_err("Unknown iSCSI TMR Function:" @@ -2119,12 +2119,8 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd, * For connection recovery, this is also the default action for * TMR TASK_REASSIGN. */ - if (sess_ref) { - pr_debug("Handle TMR, using sess_ref=true check\n"); - target_put_sess_cmd(&cmd->se_cmd); - } - iscsit_add_cmd_to_response_queue(cmd, conn, cmd->i_state); + target_put_sess_cmd(&cmd->se_cmd); return 0; } EXPORT_SYMBOL(iscsit_handle_task_mgt_cmd);

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b9637d14dc00d91cef0068cde1f9a8959b051028 Mon Sep 17 00:00:00 2001 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Thu, 19 Oct 2017 02:49:01 -0700 Subject: [PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k Older firmware version unconditionally pulls 4k frame for IOC INIT MFA frame. But driver allocates 1k or 4k max_chain_frame_sz based on FW capability. During boot time, this results in DMA read errors. Workaround fix in driver by allocating separate ioc_init frame of 4k size to support older firmware. Signed-off-by: Kashyap Desai <kashyap.desai(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Cc: stable(a)vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 277fd16305ee..857bdbb0f79d 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -780,13 +780,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ioc_init_handle = fusion->ioc_init_request_phys; IOCInitMessage = fusion->ioc_init_request; - cmd = megasas_get_cmd(instance); - - if (!cmd) { - dev_err(&instance->pdev->dev, "Could not allocate cmd for INIT Frame\n"); - ret = 1; - goto fail_get_cmd; - } + cmd = fusion->ioc_init_cmd; scratch_pad_2 = readl (&instance->reg_set->outbound_scratch_pad_2); @@ -918,8 +912,6 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ret = 0; fail_fw_init: - megasas_return_cmd(instance, cmd); -fail_get_cmd: dev_err(&instance->pdev->dev, "Init cmd return status %s for SCSI host %d\n", ret ? "FAILED" : "SUCCESS", instance->host->host_no); @@ -1333,6 +1325,56 @@ static inline int megasas_allocate_raid_maps(struct megasas_instance *instance) return -ENOMEM; } +static int megasas_alloc_ioc_init_frame(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + struct megasas_cmd *cmd; + + fusion = instance->ctrl_context; + + cmd = kmalloc(sizeof(struct megasas_cmd), GFP_KERNEL); + + if (!cmd) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + return -ENOMEM; + } + + cmd->frame = dma_alloc_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + &cmd->frame_phys_addr, GFP_KERNEL); + + if (!cmd->frame) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + kfree(cmd); + return -ENOMEM; + } + + fusion->ioc_init_cmd = cmd; + return 0; +} + +/** + * megasas_free_ioc_init_cmd - Free IOC INIT command frame + * @instance: Adapter soft state + */ +static inline void megasas_free_ioc_init_cmd(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + + fusion = instance->ctrl_context; + + if (fusion->ioc_init_cmd && fusion->ioc_init_cmd->frame) + dma_free_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + fusion->ioc_init_cmd->frame, + fusion->ioc_init_cmd->frame_phys_addr); + + if (fusion->ioc_init_cmd) + kfree(fusion->ioc_init_cmd); +} + /** * megasas_init_adapter_fusion - Initializes the FW * @instance: Adapter soft state @@ -1428,6 +1470,9 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) MEGASAS_FUSION_IOCTL_CMDS); sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS); + if (megasas_alloc_ioc_init_frame(instance)) + return 1; + /* * Allocate memory for descriptors * Create a pool of commands @@ -1465,6 +1510,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) fail_alloc_cmds: megasas_free_cmds(instance); fail_alloc_mfi_cmds: + megasas_free_ioc_init_cmd(instance); return 1; } @@ -3383,6 +3429,7 @@ megasas_issue_dcmd_fusion(struct megasas_instance *instance, void megasas_release_fusion(struct megasas_instance *instance) { + megasas_free_ioc_init_cmd(instance); megasas_free_cmds(instance); megasas_free_cmds_fusion(instance); diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 5b3f1dba1ab2..549f86b2e871 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -103,6 +103,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define THRESHOLD_REPLY_COUNT 50 #define RAID_1_PEER_CMDS 2 #define JBOD_MAPS_COUNT 2 +#define IOC_INIT_FRAME_SIZE 4096 /* * Raid Context structure which describes MegaRAID specific IO Parameters @@ -1317,6 +1318,7 @@ struct fusion_context { struct LD_STREAM_DETECT **stream_detect_by_ld; dma_addr_t ioc_init_request_phys; struct MPI2_IOC_INIT_REQUEST *ioc_init_request; + struct megasas_cmd *ioc_init_cmd; };

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b9637d14dc00d91cef0068cde1f9a8959b051028 Mon Sep 17 00:00:00 2001 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Thu, 19 Oct 2017 02:49:01 -0700 Subject: [PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k Older firmware version unconditionally pulls 4k frame for IOC INIT MFA frame. But driver allocates 1k or 4k max_chain_frame_sz based on FW capability. During boot time, this results in DMA read errors. Workaround fix in driver by allocating separate ioc_init frame of 4k size to support older firmware. Signed-off-by: Kashyap Desai <kashyap.desai(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Cc: stable(a)vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 277fd16305ee..857bdbb0f79d 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -780,13 +780,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ioc_init_handle = fusion->ioc_init_request_phys; IOCInitMessage = fusion->ioc_init_request; - cmd = megasas_get_cmd(instance); - - if (!cmd) { - dev_err(&instance->pdev->dev, "Could not allocate cmd for INIT Frame\n"); - ret = 1; - goto fail_get_cmd; - } + cmd = fusion->ioc_init_cmd; scratch_pad_2 = readl (&instance->reg_set->outbound_scratch_pad_2); @@ -918,8 +912,6 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ret = 0; fail_fw_init: - megasas_return_cmd(instance, cmd); -fail_get_cmd: dev_err(&instance->pdev->dev, "Init cmd return status %s for SCSI host %d\n", ret ? "FAILED" : "SUCCESS", instance->host->host_no); @@ -1333,6 +1325,56 @@ static inline int megasas_allocate_raid_maps(struct megasas_instance *instance) return -ENOMEM; } +static int megasas_alloc_ioc_init_frame(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + struct megasas_cmd *cmd; + + fusion = instance->ctrl_context; + + cmd = kmalloc(sizeof(struct megasas_cmd), GFP_KERNEL); + + if (!cmd) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + return -ENOMEM; + } + + cmd->frame = dma_alloc_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + &cmd->frame_phys_addr, GFP_KERNEL); + + if (!cmd->frame) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + kfree(cmd); + return -ENOMEM; + } + + fusion->ioc_init_cmd = cmd; + return 0; +} + +/** + * megasas_free_ioc_init_cmd - Free IOC INIT command frame + * @instance: Adapter soft state + */ +static inline void megasas_free_ioc_init_cmd(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + + fusion = instance->ctrl_context; + + if (fusion->ioc_init_cmd && fusion->ioc_init_cmd->frame) + dma_free_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + fusion->ioc_init_cmd->frame, + fusion->ioc_init_cmd->frame_phys_addr); + + if (fusion->ioc_init_cmd) + kfree(fusion->ioc_init_cmd); +} + /** * megasas_init_adapter_fusion - Initializes the FW * @instance: Adapter soft state @@ -1428,6 +1470,9 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) MEGASAS_FUSION_IOCTL_CMDS); sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS); + if (megasas_alloc_ioc_init_frame(instance)) + return 1; + /* * Allocate memory for descriptors * Create a pool of commands @@ -1465,6 +1510,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) fail_alloc_cmds: megasas_free_cmds(instance); fail_alloc_mfi_cmds: + megasas_free_ioc_init_cmd(instance); return 1; } @@ -3383,6 +3429,7 @@ megasas_issue_dcmd_fusion(struct megasas_instance *instance, void megasas_release_fusion(struct megasas_instance *instance) { + megasas_free_ioc_init_cmd(instance); megasas_free_cmds(instance); megasas_free_cmds_fusion(instance); diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 5b3f1dba1ab2..549f86b2e871 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -103,6 +103,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define THRESHOLD_REPLY_COUNT 50 #define RAID_1_PEER_CMDS 2 #define JBOD_MAPS_COUNT 2 +#define IOC_INIT_FRAME_SIZE 4096 /* * Raid Context structure which describes MegaRAID specific IO Parameters @@ -1317,6 +1318,7 @@ struct fusion_context { struct LD_STREAM_DETECT **stream_detect_by_ld; dma_addr_t ioc_init_request_phys; struct MPI2_IOC_INIT_REQUEST *ioc_init_request; + struct megasas_cmd *ioc_init_cmd; };

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b9637d14dc00d91cef0068cde1f9a8959b051028 Mon Sep 17 00:00:00 2001 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Thu, 19 Oct 2017 02:49:01 -0700 Subject: [PATCH] scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k Older firmware version unconditionally pulls 4k frame for IOC INIT MFA frame. But driver allocates 1k or 4k max_chain_frame_sz based on FW capability. During boot time, this results in DMA read errors. Workaround fix in driver by allocating separate ioc_init frame of 4k size to support older firmware. Signed-off-by: Kashyap Desai <kashyap.desai(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Cc: stable(a)vger.kernel.org Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 277fd16305ee..857bdbb0f79d 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -780,13 +780,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ioc_init_handle = fusion->ioc_init_request_phys; IOCInitMessage = fusion->ioc_init_request; - cmd = megasas_get_cmd(instance); - - if (!cmd) { - dev_err(&instance->pdev->dev, "Could not allocate cmd for INIT Frame\n"); - ret = 1; - goto fail_get_cmd; - } + cmd = fusion->ioc_init_cmd; scratch_pad_2 = readl (&instance->reg_set->outbound_scratch_pad_2); @@ -918,8 +912,6 @@ megasas_ioc_init_fusion(struct megasas_instance *instance) ret = 0; fail_fw_init: - megasas_return_cmd(instance, cmd); -fail_get_cmd: dev_err(&instance->pdev->dev, "Init cmd return status %s for SCSI host %d\n", ret ? "FAILED" : "SUCCESS", instance->host->host_no); @@ -1333,6 +1325,56 @@ static inline int megasas_allocate_raid_maps(struct megasas_instance *instance) return -ENOMEM; } +static int megasas_alloc_ioc_init_frame(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + struct megasas_cmd *cmd; + + fusion = instance->ctrl_context; + + cmd = kmalloc(sizeof(struct megasas_cmd), GFP_KERNEL); + + if (!cmd) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + return -ENOMEM; + } + + cmd->frame = dma_alloc_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + &cmd->frame_phys_addr, GFP_KERNEL); + + if (!cmd->frame) { + dev_err(&instance->pdev->dev, "Failed from func: %s line: %d\n", + __func__, __LINE__); + kfree(cmd); + return -ENOMEM; + } + + fusion->ioc_init_cmd = cmd; + return 0; +} + +/** + * megasas_free_ioc_init_cmd - Free IOC INIT command frame + * @instance: Adapter soft state + */ +static inline void megasas_free_ioc_init_cmd(struct megasas_instance *instance) +{ + struct fusion_context *fusion; + + fusion = instance->ctrl_context; + + if (fusion->ioc_init_cmd && fusion->ioc_init_cmd->frame) + dma_free_coherent(&instance->pdev->dev, + IOC_INIT_FRAME_SIZE, + fusion->ioc_init_cmd->frame, + fusion->ioc_init_cmd->frame_phys_addr); + + if (fusion->ioc_init_cmd) + kfree(fusion->ioc_init_cmd); +} + /** * megasas_init_adapter_fusion - Initializes the FW * @instance: Adapter soft state @@ -1428,6 +1470,9 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) MEGASAS_FUSION_IOCTL_CMDS); sema_init(&instance->ioctl_sem, MEGASAS_FUSION_IOCTL_CMDS); + if (megasas_alloc_ioc_init_frame(instance)) + return 1; + /* * Allocate memory for descriptors * Create a pool of commands @@ -1465,6 +1510,7 @@ megasas_init_adapter_fusion(struct megasas_instance *instance) fail_alloc_cmds: megasas_free_cmds(instance); fail_alloc_mfi_cmds: + megasas_free_ioc_init_cmd(instance); return 1; } @@ -3383,6 +3429,7 @@ megasas_issue_dcmd_fusion(struct megasas_instance *instance, void megasas_release_fusion(struct megasas_instance *instance) { + megasas_free_ioc_init_cmd(instance); megasas_free_cmds(instance); megasas_free_cmds_fusion(instance); diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 5b3f1dba1ab2..549f86b2e871 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -103,6 +103,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define THRESHOLD_REPLY_COUNT 50 #define RAID_1_PEER_CMDS 2 #define JBOD_MAPS_COUNT 2 +#define IOC_INIT_FRAME_SIZE 4096 /* * Raid Context structure which describes MegaRAID specific IO Parameters @@ -1317,6 +1318,7 @@ struct fusion_context { struct LD_STREAM_DETECT **stream_detect_by_ld; dma_addr_t ioc_init_request_phys; struct MPI2_IOC_INIT_REQUEST *ioc_init_request; + struct megasas_cmd *ioc_init_cmd; };

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] net/9p: Switch to wait_event_killable()" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 9523feac272ccad2ad8186ba4fcc89103754de52 Mon Sep 17 00:00:00 2001 From: Tuomas Tynkkynen <tuomas(a)tuxera.com> Date: Wed, 6 Sep 2017 17:59:08 +0300 Subject: [PATCH] net/9p: Switch to wait_event_killable() Because userspace gets Very Unhappy when calls like stat() and execve() return -EINTR on 9p filesystem mounts. For instance, when bash is looking in PATH for things to execute and some SIGCHLD interrupts stat(), bash can throw a spurious 'command not found' since it doesn't retry the stat(). In practice, hitting the problem is rare and needs a really slow/bogged down 9p server. Cc: stable(a)vger.kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas(a)tuxera.com> Signed-off-by: Al Viro <viro(a)zeniv.linux.org.uk> diff --git a/net/9p/client.c b/net/9p/client.c index 4674235b0d9b..1beb131dd3e1 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -773,8 +773,7 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) } again: /* Wait for the response */ - err = wait_event_interruptible(*req->wq, - req->status >= REQ_STATUS_RCVD); + err = wait_event_killable(*req->wq, req->status >= REQ_STATUS_RCVD); /* * Make sure our req is coherent with regard to updates in other diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index f24b25c25106..f3a4efcf1456 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -286,8 +286,8 @@ p9_virtio_request(struct p9_client *client, struct p9_req_t *req) if (err == -ENOSPC) { chan->ring_bufs_avail = 0; spin_unlock_irqrestore(&chan->lock, flags); - err = wait_event_interruptible(*chan->vc_wq, - chan->ring_bufs_avail); + err = wait_event_killable(*chan->vc_wq, + chan->ring_bufs_avail); if (err == -ERESTARTSYS) return err; @@ -327,7 +327,7 @@ static int p9_get_mapped_pages(struct virtio_chan *chan, * Other zc request to finish here */ if (atomic_read(&vp_pinned) >= chan->p9_max_pages) { - err = wait_event_interruptible(vp_wq, + err = wait_event_killable(vp_wq, (atomic_read(&vp_pinned) < chan->p9_max_pages)); if (err == -ERESTARTSYS) return err; @@ -471,8 +471,8 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req, if (err == -ENOSPC) { chan->ring_bufs_avail = 0; spin_unlock_irqrestore(&chan->lock, flags); - err = wait_event_interruptible(*chan->vc_wq, - chan->ring_bufs_avail); + err = wait_event_killable(*chan->vc_wq, + chan->ring_bufs_avail); if (err == -ERESTARTSYS) goto err_out; @@ -489,8 +489,7 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req, virtqueue_kick(chan->vq); spin_unlock_irqrestore(&chan->lock, flags); p9_debug(P9_DEBUG_TRANS, "virtio request kicked\n"); - err = wait_event_interruptible(*req->wq, - req->status >= REQ_STATUS_RCVD); + err = wait_event_killable(*req->wq, req->status >= REQ_STATUS_RCVD); /* * Non kernel buffers are pinned, unpin them */ diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c index 6ad3e043c617..325c56043007 100644 --- a/net/9p/trans_xen.c +++ b/net/9p/trans_xen.c @@ -156,8 +156,8 @@ static int p9_xen_request(struct p9_client *client, struct p9_req_t *p9_req) ring = &priv->rings[num]; again: - while (wait_event_interruptible(ring->wq, - p9_xen_write_todo(ring, size)) != 0) + while (wait_event_killable(ring->wq, + p9_xen_write_todo(ring, size)) != 0) ; spin_lock_irqsave(&ring->lock, flags);

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] net/9p: Switch to wait_event_killable()" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 9523feac272ccad2ad8186ba4fcc89103754de52 Mon Sep 17 00:00:00 2001 From: Tuomas Tynkkynen <tuomas(a)tuxera.com> Date: Wed, 6 Sep 2017 17:59:08 +0300 Subject: [PATCH] net/9p: Switch to wait_event_killable() Because userspace gets Very Unhappy when calls like stat() and execve() return -EINTR on 9p filesystem mounts. For instance, when bash is looking in PATH for things to execute and some SIGCHLD interrupts stat(), bash can throw a spurious 'command not found' since it doesn't retry the stat(). In practice, hitting the problem is rare and needs a really slow/bogged down 9p server. Cc: stable(a)vger.kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas(a)tuxera.com> Signed-off-by: Al Viro <viro(a)zeniv.linux.org.uk> diff --git a/net/9p/client.c b/net/9p/client.c index 4674235b0d9b..1beb131dd3e1 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -773,8 +773,7 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) } again: /* Wait for the response */ - err = wait_event_interruptible(*req->wq, - req->status >= REQ_STATUS_RCVD); + err = wait_event_killable(*req->wq, req->status >= REQ_STATUS_RCVD); /* * Make sure our req is coherent with regard to updates in other diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index f24b25c25106..f3a4efcf1456 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -286,8 +286,8 @@ p9_virtio_request(struct p9_client *client, struct p9_req_t *req) if (err == -ENOSPC) { chan->ring_bufs_avail = 0; spin_unlock_irqrestore(&chan->lock, flags); - err = wait_event_interruptible(*chan->vc_wq, - chan->ring_bufs_avail); + err = wait_event_killable(*chan->vc_wq, + chan->ring_bufs_avail); if (err == -ERESTARTSYS) return err; @@ -327,7 +327,7 @@ static int p9_get_mapped_pages(struct virtio_chan *chan, * Other zc request to finish here */ if (atomic_read(&vp_pinned) >= chan->p9_max_pages) { - err = wait_event_interruptible(vp_wq, + err = wait_event_killable(vp_wq, (atomic_read(&vp_pinned) < chan->p9_max_pages)); if (err == -ERESTARTSYS) return err; @@ -471,8 +471,8 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req, if (err == -ENOSPC) { chan->ring_bufs_avail = 0; spin_unlock_irqrestore(&chan->lock, flags); - err = wait_event_interruptible(*chan->vc_wq, - chan->ring_bufs_avail); + err = wait_event_killable(*chan->vc_wq, + chan->ring_bufs_avail); if (err == -ERESTARTSYS) goto err_out; @@ -489,8 +489,7 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req, virtqueue_kick(chan->vq); spin_unlock_irqrestore(&chan->lock, flags); p9_debug(P9_DEBUG_TRANS, "virtio request kicked\n"); - err = wait_event_interruptible(*req->wq, - req->status >= REQ_STATUS_RCVD); + err = wait_event_killable(*req->wq, req->status >= REQ_STATUS_RCVD); /* * Non kernel buffers are pinned, unpin them */ diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c index 6ad3e043c617..325c56043007 100644 --- a/net/9p/trans_xen.c +++ b/net/9p/trans_xen.c @@ -156,8 +156,8 @@ static int p9_xen_request(struct p9_client *client, struct p9_req_t *p9_req) ring = &priv->rings[num]; again: - while (wait_event_interruptible(ring->wq, - p9_xen_write_todo(ring, size)) != 0) + while (wait_event_killable(ring->wq, + p9_xen_write_todo(ring, size)) != 0) ; spin_lock_irqsave(&ring->lock, flags);

7 years, 2 months

1
0
0 0

[Linux-stable-mirror] FAILED: patch "[PATCH] ext4: prevent data corruption with inline data + DAX" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 559db4c6d784ceedc2a5418ced4d357cb843e221 Mon Sep 17 00:00:00 2001 From: Ross Zwisler <ross.zwisler(a)linux.intel.com> Date: Thu, 12 Oct 2017 11:52:34 -0400 Subject: [PATCH] ext4: prevent data corruption with inline data + DAX If an inode has inline data it is currently prevented from using DAX by a check in ext4_set_inode_flags(). When the inode grows inline data via ext4_create_inline_data() or removes its inline data via ext4_destroy_inline_data_nolock(), the value of S_DAX can change. Currently these changes are unsafe because we don't hold off page faults and I/O, write back dirty radix tree entries and invalidate all mappings. There are also issues with mm-level races when changing the value of S_DAX, as well as issues with the VM_MIXEDMAP flag: https://www.spinics.net/lists/linux-xfs/msg09859.html The unsafe transition of S_DAX can reliably cause data corruption, as shown by the following fstest: https://patchwork.kernel.org/patch/9948381/ Fix this issue by preventing the DAX mount option from being used on filesystems that were created to support inline data. Inline data is an option given to mkfs.ext4. Signed-off-by: Ross Zwisler <ross.zwisler(a)linux.intel.com> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Reviewed-by: Jan Kara <jack(a)suse.cz> CC: stable(a)vger.kernel.org diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index f0bbc8cb6555..1367553c43bb 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -303,11 +303,6 @@ static int ext4_create_inline_data(handle_t *handle, EXT4_I(inode)->i_inline_size = len + EXT4_MIN_INLINE_DATA_SIZE; ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS); ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); - /* - * Propagate changes to inode->i_flags as well - e.g. S_DAX may - * get cleared - */ - ext4_set_inode_flags(inode); get_bh(is.iloc.bh); error = ext4_mark_iloc_dirty(handle, inode, &is.iloc); @@ -452,11 +447,6 @@ static int ext4_destroy_inline_data_nolock(handle_t *handle, } } ext4_clear_inode_flag(inode, EXT4_INODE_INLINE_DATA); - /* - * Propagate changes to inode->i_flags as well - e.g. S_DAX may - * get set. - */ - ext4_set_inode_flags(inode); get_bh(is.iloc.bh); error = ext4_mark_iloc_dirty(handle, inode, &is.iloc); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index b104096fce9e..986475c0d552 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3708,6 +3708,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) } if (sbi->s_mount_opt & EXT4_MOUNT_DAX) { + if (ext4_has_feature_inline_data(sb)) { + ext4_msg(sb, KERN_ERR, "Cannot use DAX on a filesystem" + " that may contain inline data"); + goto failed_mount; + } err = bdev_dax_supported(sb, blocksize); if (err) goto failed_mount;

7 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror