- Linux-stable-mirror - lists.linaro.org

Patch "net/mlx4_en: Change default QoS settings" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/mlx4_en: Change default QoS settings to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mlx4_en-change-default-qos-settings.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Moni Shoua <monis(a)mellanox.com> Date: Thu, 28 Dec 2017 16:26:11 +0200 Subject: net/mlx4_en: Change default QoS settings From: Moni Shoua <monis(a)mellanox.com> [ Upstream commit a42b63c1ac1986f17f71bc91a6b0aaa14d4dae71 ] Change the default mapping between TC and TCG as follows: Prio | TC/TCG | from to | (set by FW) (set by SW) ---------+----------------------------------- 0 | 0/0 0/7 1 | 1/0 0/6 2 | 2/0 0/5 3 | 3/0 0/4 4 | 4/0 0/3 5 | 5/0 0/2 6 | 6/0 0/1 7 | 7/0 0/0 These new settings cause that a pause frame for any prio stops traffic for all prios. Fixes: 564c274c3df0 ("net/mlx4_en: DCB QoS support") Signed-off-by: Moni Shoua <monis(a)mellanox.com> Signed-off-by: Maor Gottlieb <maorg(a)mellanox.com> Signed-off-by: Tariq Toukan <tariqt(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c | 5 +++++ drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 7 +++++++ drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 1 + 3 files changed, 13 insertions(+) --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -310,6 +310,7 @@ static int mlx4_en_ets_validate(struct m } switch (ets->tc_tsa[i]) { + case IEEE_8021QAZ_TSA_VENDOR: case IEEE_8021QAZ_TSA_STRICT: break; case IEEE_8021QAZ_TSA_ETS: @@ -347,6 +348,10 @@ static int mlx4_en_config_port_scheduler /* higher TC means higher priority => lower pg */ for (i = IEEE_8021QAZ_MAX_TCS - 1; i >= 0; i--) { switch (ets->tc_tsa[i]) { + case IEEE_8021QAZ_TSA_VENDOR: + pg[i] = MLX4_EN_TC_VENDOR; + tc_tx_bw[i] = MLX4_EN_BW_MAX; + break; case IEEE_8021QAZ_TSA_STRICT: pg[i] = num_strict++; tc_tx_bw[i] = MLX4_EN_BW_MAX; --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -3336,6 +3336,13 @@ int mlx4_en_init_netdev(struct mlx4_en_d priv->msg_enable = MLX4_EN_MSG_LEVEL; #ifdef CONFIG_MLX4_EN_DCB if (!mlx4_is_slave(priv->mdev->dev)) { + u8 prio; + + for (prio = 0; prio < IEEE_8021QAZ_MAX_TCS; ++prio) { + priv->ets.prio_tc[prio] = prio; + priv->ets.tc_tsa[prio] = IEEE_8021QAZ_TSA_VENDOR; + } + priv->dcbx_cap = DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE; priv->flags |= MLX4_EN_DCB_ENABLED; --- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h @@ -479,6 +479,7 @@ struct mlx4_en_frag_info { #define MLX4_EN_BW_MIN 1 #define MLX4_EN_BW_MAX 100 /* Utilize 100% of the line */ +#define MLX4_EN_TC_VENDOR 0 #define MLX4_EN_TC_ETS 7 enum dcb_pfc_type { Patches currently in stable-queue which might be from monis(a)mellanox.com are queue-4.15/net-mlx4_en-change-default-qos-settings.patch

7 years, 8 months

1
0
0 0

Patch "net: hns3: fix for changing MTU" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: fix for changing MTU to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-for-changing-mtu.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Fuyun Liang <liangfuyun1(a)huawei.com> Date: Fri, 5 Jan 2018 18:18:20 +0800 Subject: net: hns3: fix for changing MTU From: Fuyun Liang <liangfuyun1(a)huawei.com> [ Upstream commit 5bad95a1e55f4d5bb41e130db859d57eaf1b1549 ] when changing MTU, The new MTU must need to be set to netdevice. Fixes: a8e8b7ff3517 ("net: hns3: Add support to change MTU in HNS3 hardware") Signed-off-by: Fuyun Liang <liangfuyun1(a)huawei.com> Signed-off-by: Peng Li <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -1324,6 +1324,8 @@ static int hns3_nic_change_mtu(struct ne return ret; } + netdev->mtu = new_mtu; + /* if the netdev was running earlier, bring it up again */ if (if_running && hns3_nic_net_open(netdev)) ret = -EINVAL; Patches currently in stable-queue which might be from liangfuyun1(a)huawei.com are queue-4.15/net-hns3-fix-for-getting-auto-negotiation-state-in-hclge_get_autoneg.patch queue-4.15/net-hns3-add-asym-pause-support-to-phy-default-features.patch queue-4.15/net-hns3-fix-for-changing-mtu.patch

7 years, 8 months

1
0
0 0

Patch "net: hns3: free the ring_data structrue when change tqps" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: free the ring_data structrue when change tqps to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-free-the-ring_data-structrue-when-change-tqps.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Peng Li <lipeng321(a)huawei.com> Date: Fri, 22 Dec 2017 12:21:43 +0800 Subject: net: hns3: free the ring_data structrue when change tqps From: Peng Li <lipeng321(a)huawei.com> [ Upstream commit 99fdf6b1cadf41bb253408589788f025027274f3 ] This patch fixes a memory leak problems in change tqps process, the function hns3_uninit_all_ring and hns3_init_all_ring may be called many times. Signed-off-by: Peng Li <lipeng321(a)huawei.com> Signed-off-by: Mingguang Qu <qumingguang(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -2785,8 +2785,12 @@ int hns3_uninit_all_ring(struct hns3_nic h->ae_algo->ops->reset_queue(h, i); hns3_fini_ring(priv->ring_data[i].ring); + devm_kfree(priv->dev, priv->ring_data[i].ring); hns3_fini_ring(priv->ring_data[i + h->kinfo.num_tqps].ring); + devm_kfree(priv->dev, + priv->ring_data[i + h->kinfo.num_tqps].ring); } + devm_kfree(priv->dev, priv->ring_data); return 0; } Patches currently in stable-queue which might be from lipeng321(a)huawei.com are queue-4.15/net-hns3-fix-for-getting-auto-negotiation-state-in-hclge_get_autoneg.patch queue-4.15/net-hns3-free-the-ring_data-structrue-when-change-tqps.patch queue-4.15/net-hns3-fix-a-loop-index-error-of-tqp-statistics-query.patch queue-4.15/net-hns3-fix-an-error-macro-definition-of-hns3_tqp_stat.patch queue-4.15/net-hns3-add-asym-pause-support-to-phy-default-features.patch queue-4.15/net-hns3-fix-an-error-of-total-drop-packet-statistics.patch queue-4.15/net-hns3-fix-for-changing-mtu.patch

7 years, 8 months

1
0
0 0

Patch "net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-for-getting-auto-negotiation-state-in-hclge_get_autoneg.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Fuyun Liang <liangfuyun1(a)huawei.com> Date: Fri, 22 Dec 2017 12:21:50 +0800 Subject: net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg From: Fuyun Liang <liangfuyun1(a)huawei.com> [ Upstream commit 27b5bf49f0924fd62d2b1ef8467b40773973da34 ] When phy exists, we use the value of phydev.autoneg to represent the auto-negotiation state of hardware. Otherwise, we use the value of mac.autoneg to represent it. This patch fixes for getting a error value of auto-negotiation state in hclge_get_autoneg(). Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Fuyun Liang <liangfuyun1(a)huawei.com> Signed-off-by: Peng Li <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -2189,6 +2189,10 @@ static int hclge_get_autoneg(struct hnae { struct hclge_vport *vport = hclge_get_vport(handle); struct hclge_dev *hdev = vport->back; + struct phy_device *phydev = hdev->hw.mac.phydev; + + if (phydev) + return phydev->autoneg; hclge_query_autoneg_result(hdev); Patches currently in stable-queue which might be from liangfuyun1(a)huawei.com are queue-4.15/net-hns3-fix-for-getting-auto-negotiation-state-in-hclge_get_autoneg.patch queue-4.15/net-hns3-add-asym-pause-support-to-phy-default-features.patch queue-4.15/net-hns3-fix-for-changing-mtu.patch

7 years, 8 months

1
0
0 0

Patch "net: hns3: Fix an error macro definition of HNS3_TQP_STAT" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: Fix an error macro definition of HNS3_TQP_STAT to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-an-error-macro-definition-of-hns3_tqp_stat.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Jian Shen <shenjian15(a)huawei.com> Date: Fri, 5 Jan 2018 18:18:14 +0800 Subject: net: hns3: Fix an error macro definition of HNS3_TQP_STAT From: Jian Shen <shenjian15(a)huawei.com> [ Upstream commit 57ffee737b36dbb81e8e60a37e01791553157a5e ] The member "stats_offset" was designed to indicate the offset of each member of struct ring_stats in struct hns3_enet_ring, but forgot to add the offset of the member in struct ring_stats. Fixes: 496d03e960a ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by: Jian Shen <shenjian15(a)huawei.com> Signed-off-by: Peng Li <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c @@ -23,7 +23,8 @@ struct hns3_stats { #define HNS3_TQP_STAT(_string, _member) { \ .stats_string = _string, \ .stats_size = FIELD_SIZEOF(struct ring_stats, _member), \ - .stats_offset = offsetof(struct hns3_enet_ring, stats), \ + .stats_offset = offsetof(struct hns3_enet_ring, stats) +\ + offsetof(struct ring_stats, _member), \ } \ static const struct hns3_stats hns3_txq_stats[] = { Patches currently in stable-queue which might be from shenjian15(a)huawei.com are queue-4.15/net-hns3-fix-a-loop-index-error-of-tqp-statistics-query.patch queue-4.15/net-hns3-fix-an-error-macro-definition-of-hns3_tqp_stat.patch queue-4.15/net-hns3-fix-an-error-of-total-drop-packet-statistics.patch

7 years, 8 months

1
0
0 0

Patch "net: hns3: Fix an error of total drop packet statistics" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: Fix an error of total drop packet statistics to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-an-error-of-total-drop-packet-statistics.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Jian Shen <shenjian15(a)huawei.com> Date: Fri, 5 Jan 2018 18:18:12 +0800 Subject: net: hns3: Fix an error of total drop packet statistics From: Jian Shen <shenjian15(a)huawei.com> [ Upstream commit d2a5dca8404871be683c6bbc175ebf9c56dd2865 ] The dropped tx/rx packets number of each tqp should also be counted into the total drop tx/rx packets numbers. Fixes: 76ad4f0ee74 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15(a)huawei.com> Signed-off-by: Peng Li <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_enet.c @@ -1055,6 +1055,8 @@ hns3_nic_get_stats64(struct net_device * u64 rx_bytes = 0; u64 tx_pkts = 0; u64 rx_pkts = 0; + u64 tx_drop = 0; + u64 rx_drop = 0; for (idx = 0; idx < queue_num; idx++) { /* fetch the tx stats */ @@ -1063,6 +1065,8 @@ hns3_nic_get_stats64(struct net_device * start = u64_stats_fetch_begin_irq(&ring->syncp); tx_bytes += ring->stats.tx_bytes; tx_pkts += ring->stats.tx_pkts; + tx_drop += ring->stats.tx_busy; + tx_drop += ring->stats.sw_err_cnt; } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); /* fetch the rx stats */ @@ -1071,6 +1075,9 @@ hns3_nic_get_stats64(struct net_device * start = u64_stats_fetch_begin_irq(&ring->syncp); rx_bytes += ring->stats.rx_bytes; rx_pkts += ring->stats.rx_pkts; + rx_drop += ring->stats.non_vld_descs; + rx_drop += ring->stats.err_pkt_len; + rx_drop += ring->stats.l2_err; } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); } @@ -1086,8 +1093,8 @@ hns3_nic_get_stats64(struct net_device * stats->rx_missed_errors = netdev->stats.rx_missed_errors; stats->tx_errors = netdev->stats.tx_errors; - stats->rx_dropped = netdev->stats.rx_dropped; - stats->tx_dropped = netdev->stats.tx_dropped; + stats->rx_dropped = rx_drop + netdev->stats.rx_dropped; + stats->tx_dropped = tx_drop + netdev->stats.tx_dropped; stats->collisions = netdev->stats.collisions; stats->rx_over_errors = netdev->stats.rx_over_errors; stats->rx_frame_errors = netdev->stats.rx_frame_errors; Patches currently in stable-queue which might be from shenjian15(a)huawei.com are queue-4.15/net-hns3-fix-a-loop-index-error-of-tqp-statistics-query.patch queue-4.15/net-hns3-fix-an-error-macro-definition-of-hns3_tqp_stat.patch queue-4.15/net-hns3-fix-an-error-of-total-drop-packet-statistics.patch

7 years, 8 months

1
0
0 0

Patch "net: hns3: Fix a loop index error of tqp statistics query" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: Fix a loop index error of tqp statistics query to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-fix-a-loop-index-error-of-tqp-statistics-query.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Jian Shen <shenjian15(a)huawei.com> Date: Fri, 5 Jan 2018 18:18:13 +0800 Subject: net: hns3: Fix a loop index error of tqp statistics query From: Jian Shen <shenjian15(a)huawei.com> [ Upstream commit 94bfaafac9d2a3c0bcca00d01e38f7597b741799 ] An error loop index was used while querying statistics data of tqps, which may cause call trace. Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver") Signed-off-by: Jian Shen <shenjian15(a)huawei.com> Signed-off-by: Peng Li <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c @@ -455,13 +455,13 @@ static u64 *hns3_get_stats_tqps(struct h struct hnae3_knic_private_info *kinfo = &handle->kinfo; struct hns3_enet_ring *ring; u8 *stat; - u32 i; + int i, j; /* get stats for Tx */ for (i = 0; i < kinfo->num_tqps; i++) { ring = nic_priv->ring_data[i].ring; - for (i = 0; i < HNS3_TXQ_STATS_COUNT; i++) { - stat = (u8 *)ring + hns3_txq_stats[i].stats_offset; + for (j = 0; j < HNS3_TXQ_STATS_COUNT; j++) { + stat = (u8 *)ring + hns3_txq_stats[j].stats_offset; *data++ = *(u64 *)stat; } } @@ -469,8 +469,8 @@ static u64 *hns3_get_stats_tqps(struct h /* get stats for Rx */ for (i = 0; i < kinfo->num_tqps; i++) { ring = nic_priv->ring_data[i + kinfo->num_tqps].ring; - for (i = 0; i < HNS3_RXQ_STATS_COUNT; i++) { - stat = (u8 *)ring + hns3_rxq_stats[i].stats_offset; + for (j = 0; j < HNS3_RXQ_STATS_COUNT; j++) { + stat = (u8 *)ring + hns3_rxq_stats[j].stats_offset; *data++ = *(u64 *)stat; } } Patches currently in stable-queue which might be from shenjian15(a)huawei.com are queue-4.15/net-hns3-fix-a-loop-index-error-of-tqp-statistics-query.patch queue-4.15/net-hns3-fix-an-error-macro-definition-of-hns3_tqp_stat.patch queue-4.15/net-hns3-fix-an-error-of-total-drop-packet-statistics.patch

7 years, 8 months

1
0
0 0

Patch "net: Fix netdev_WARN_ONCE macro" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: Fix netdev_WARN_ONCE macro to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-fix-netdev_warn_once-macro.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Gal Pressman <galp(a)mellanox.com> Date: Sun, 7 Jan 2018 12:08:35 +0200 Subject: net: Fix netdev_WARN_ONCE macro From: Gal Pressman <galp(a)mellanox.com> [ Upstream commit 72dd831e24cc9487a9cd534fdd675fe97e3c1839 ] netdev_WARN_ONCE is broken (whoops..), this fix will remove the unnecessary "condition" parameter, add the missing comma and change "arg" to "args". Fixes: 375ef2b1f0d0 ("net: Introduce netdev_*_once functions") Signed-off-by: Gal Pressman <galp(a)mellanox.com> Reviewed-by: Saeed Mahameed <saeedm(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/netdevice.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -4402,8 +4402,8 @@ do { \ WARN(1, "netdevice: %s%s\n" format, netdev_name(dev), \ netdev_reg_state(dev), ##args) -#define netdev_WARN_ONCE(dev, condition, format, arg...) \ - WARN_ONCE(1, "netdevice: %s%s\n" format, netdev_name(dev) \ +#define netdev_WARN_ONCE(dev, format, args...) \ + WARN_ONCE(1, "netdevice: %s%s\n" format, netdev_name(dev), \ netdev_reg_state(dev), ##args) /* netif printk helpers, similar to netdev_printk */ Patches currently in stable-queue which might be from galp(a)mellanox.com are queue-4.15/net-fix-netdev_warn_once-macro.patch

7 years, 8 months

1
0
0 0

Patch "net: hns3: add Asym Pause support to phy default features" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: hns3: add Asym Pause support to phy default features to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-hns3-add-asym-pause-support-to-phy-default-features.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Fuyun Liang <liangfuyun1(a)huawei.com> Date: Fri, 22 Dec 2017 12:21:53 +0800 Subject: net: hns3: add Asym Pause support to phy default features From: Fuyun Liang <liangfuyun1(a)huawei.com> [ Upstream commit f16121c80c8ee4dab3c41363cb8b24f8d8eaf45f ] commit c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization") adds default supported features for phy, but our hardware also supports Asym Pause. This patch adds Asym Pause support to phy default features to prevent Asym Pause can not be advertised when the phy negotiates flow control. Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature initialization") Signed-off-by: Fuyun Liang <liangfuyun1(a)huawei.com> Signed-off-by: Peng Li <lipeng321(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c @@ -17,6 +17,7 @@ #define HCLGE_PHY_SUPPORTED_FEATURES (SUPPORTED_Autoneg | \ SUPPORTED_TP | \ SUPPORTED_Pause | \ + SUPPORTED_Asym_Pause | \ PHY_10BT_FEATURES | \ PHY_100BT_FEATURES | \ PHY_1000BT_FEATURES) Patches currently in stable-queue which might be from liangfuyun1(a)huawei.com are queue-4.15/net-hns3-fix-for-getting-auto-negotiation-state-in-hclge_get_autoneg.patch queue-4.15/net-hns3-add-asym-pause-support-to-phy-default-features.patch queue-4.15/net-hns3-fix-for-changing-mtu.patch

7 years, 8 months

1
0
0 0

Patch "media: videobuf2-core: don't go out of the buffer range" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: videobuf2-core: don't go out of the buffer range to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-videobuf2-core-don-t-go-out-of-the-buffer-range.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 10:16:32 CEST 2018 From: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Date: Thu, 28 Dec 2017 09:16:47 -0500 Subject: media: videobuf2-core: don't go out of the buffer range From: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> [ Upstream commit df93dc61b0d8b19a5c9db545cf3fcc24f88dfde4 ] Currently, there's no check if an invalid buffer range is passed. However, while testing DVB memory mapped apps, I got this: videobuf2_core: VB: num_buffers -2143943680, buffer 33, index -2143943647 unable to handle kernel paging request at ffff888b773c0890 IP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] PGD 4142c7067 P4D 4142c7067 PUD 0 Oops: 0002 [#1] SMP Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc rc_dvbsky sp2 ts2020 intel_rapl x86_pkg_temp_thermal dvb_usb_dvbsky intel_powerclamp dvb_usb_v2 coretemp m88ds3103 kvm_intel i2c_mux dvb_core snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul videobuf2_vmalloc videobuf2_memops snd_hda_intel ghash_clmulni_intel videobuf2_core snd_hda_codec rc_core mei_me intel_cstate snd_hwdep snd_hda_core videodev intel_uncore snd_pcm mei media tpm_tis tpm_tis_core intel_rapl_perf tpm snd_timer lpc_ich snd soundcore kvm irqbypass libcrc32c i915 i2c_algo_bit drm_kms_helper e1000e ptp drm crc32c_intel video pps_core CPU: 3 PID: 1776 Comm: dvbv5-zap Not tainted 4.14.0+ #78 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff88877c73bc80 task.stack: ffffb7c402418000 RIP: 0010:__vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] RSP: 0018:ffffb7c40241bc60 EFLAGS: 00010246 RAX: 0000000080360421 RBX: 0000000000000021 RCX: 000000000000000a RDX: ffffb7c40241bcf4 RSI: ffff888780362c60 RDI: ffff888796d8e130 RBP: ffffb7c40241bcc8 R08: 0000000000000316 R09: 0000000000000004 R10: ffff888780362c00 R11: 0000000000000001 R12: 000000000002f000 R13: ffff8887758be700 R14: 0000000000021000 R15: 0000000000000001 FS: 00007f2849024740(0000) GS:ffff888796d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888b773c0890 CR3: 000000043beb2005 CR4: 00000000003606e0 Call Trace: vb2_core_reqbufs+0x226/0x420 [videobuf2_core] dvb_vb2_reqbufs+0x2d/0xc0 [dvb_core] dvb_dvr_do_ioctl+0x98/0x1d0 [dvb_core] dvb_usercopy+0x53/0x1b0 [dvb_core] ? dvb_demux_ioctl+0x20/0x20 [dvb_core] ? tty_ldisc_deref+0x16/0x20 ? tty_write+0x1f9/0x310 ? process_echoes+0x70/0x70 dvb_dvr_ioctl+0x15/0x20 [dvb_core] do_vfs_ioctl+0xa5/0x600 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x7f28486f7ea7 RSP: 002b:00007ffc13b2db18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055b10fc06130 RCX: 00007f28486f7ea7 RDX: 00007ffc13b2db48 RSI: 00000000c0086f3c RDI: 0000000000000007 RBP: 0000000000000203 R08: 000055b10df1e02c R09: 000000000000002e R10: 0036b42415108357 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f2849062f60 R14: 00000000000001f1 R15: 00007ffc13b2da54 Code: 74 0a 60 8b 0a 48 83 c0 30 48 83 c2 04 89 48 d0 89 48 d4 48 39 f0 75 eb 41 8b 42 08 83 7d d4 01 41 c7 82 ec 01 00 00 ff ff ff ff <4d> 89 94 c5 88 00 00 00 74 14 83 c3 01 41 39 dc 0f 85 f1 fe ff RIP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] RSP: ffffb7c40241bc60 CR2: ffff888b773c0890 So, add a sanity check in order to prevent going past array. Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Acked-by: Sakari Ailus <sakari.ailus(a)linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/v4l2-core/videobuf2-core.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -332,6 +332,10 @@ static int __vb2_queue_alloc(struct vb2_ struct vb2_buffer *vb; int ret; + /* Ensure that q->num_buffers+num_buffers is below VB2_MAX_FRAME */ + num_buffers = min_t(unsigned int, num_buffers, + VB2_MAX_FRAME - q->num_buffers); + for (buffer = 0; buffer < num_buffers; ++buffer) { /* Allocate videobuf buffer structures */ vb = kzalloc(q->buf_struct_size, GFP_KERNEL); Patches currently in stable-queue which might be from mchehab(a)s-opensource.com are queue-4.15/media-videobuf2-core-don-t-go-out-of-the-buffer-range.patch

7 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror