- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hid-wacom-fix-reporting-of-touch-toggle-wacom_hid_wd_mute_device-events.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 403c0f681c1964ff1db8c2fb8de8c4067779d081 Mon Sep 17 00:00:00 2001 From: Jason Gerecke <killertofu(a)gmail.com> Date: Tue, 26 Dec 2017 14:53:55 -0800 Subject: HID: wacom: Fix reporting of touch toggle (WACOM_HID_WD_MUTE_DEVICE) events From: Jason Gerecke <killertofu(a)gmail.com> commit 403c0f681c1964ff1db8c2fb8de8c4067779d081 upstream. Touch toggle softkeys send a '1' while pressed and a '0' while released, requring the kernel to keep track of wether touch should be enabled or disabled. The code does not handle the state transitions properly, however. If the key is pressed repeatedly, the following four states of states are cycled through (assuming touch starts out enabled): Press: shared->is_touch_on => 0, SW_MUTE_DEVICE => 1 Release: shared->is_touch_on => 0, SW_MUTE_DEVICE => 1 Press: shared->is_touch_on => 1, SW_MUTE_DEVICE => 0 Release: shared->is_touch_on => 1, SW_MUTE_DEVICE => 1 The hardware always properly enables/disables touch when the key is pressed but applications that listen for SW_MUTE_DEVICE events to provide feedback about the state will only ever show touch as being enabled while the key is held, and only every-other time. This sequence occurs because the fallthrough WACOM_HID_WD_TOUCHONOFF case is always handled, and it uses the value of the *local* is_touch_on variable as the value to report to userspace. The local value is equal to the shared value when the button is pressed, but equal to zero when the button is released. Reporting the shared value to userspace fixes this problem, but the fallthrough case needs to update the shared value in an incompatible way (which is why the local variable was introduced in the first place). To work around this, we just handle both cases in a single block of code and update the shared variable as appropriate. Fixes: d793ff8187 ("HID: wacom: generic: support touch on/off softkey") Signed-off-by: Jason Gerecke <jason.gerecke(a)wacom.com> Reviewed-by: Aaron Skomra <aaron.skomra(a)wacom.com> Tested-by: Aaron Skomra <aaron.skomra(a)wacom.com> Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hid/wacom_wac.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1924,7 +1924,6 @@ static void wacom_wac_pad_event(struct h struct wacom_features *features = &wacom_wac->features; unsigned equivalent_usage = wacom_equivalent_usage(usage->hid); int i; - bool is_touch_on = value; bool do_report = false; /* @@ -1969,16 +1968,17 @@ static void wacom_wac_pad_event(struct h break; case WACOM_HID_WD_MUTE_DEVICE: - if (wacom_wac->shared->touch_input && value) { - wacom_wac->shared->is_touch_on = !wacom_wac->shared->is_touch_on; - is_touch_on = wacom_wac->shared->is_touch_on; - } - - /* fall through*/ case WACOM_HID_WD_TOUCHONOFF: if (wacom_wac->shared->touch_input) { + bool *is_touch_on = &wacom_wac->shared->is_touch_on; + + if (equivalent_usage == WACOM_HID_WD_MUTE_DEVICE && value) + *is_touch_on = !(*is_touch_on); + else if (equivalent_usage == WACOM_HID_WD_TOUCHONOFF) + *is_touch_on = value; + input_report_switch(wacom_wac->shared->touch_input, - SW_MUTE_DEVICE, !is_touch_on); + SW_MUTE_DEVICE, !(*is_touch_on)); input_sync(wacom_wac->shared->touch_input); } break; Patches currently in stable-queue which might be from killertofu(a)gmail.com are queue-4.15/hid-wacom-fix-reporting-of-touch-toggle-wacom_hid_wd_mute_device-events.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-nand-denali_pci-add-missing-module_description-author-license.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From d822401d1c6898a4a4ee03977b78b8cec402e88a Mon Sep 17 00:00:00 2001 From: Jesse Chan <jc(a)linux.com> Date: Mon, 20 Nov 2017 12:57:13 -0800 Subject: mtd: nand: denali_pci: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE From: Jesse Chan <jc(a)linux.com> commit d822401d1c6898a4a4ee03977b78b8cec402e88a upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc(a)linux.com> Acked-by: Masahiro Yamada <yamada.masahiro(a)socionext.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/nand/denali_pci.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/mtd/nand/denali_pci.c +++ b/drivers/mtd/nand/denali_pci.c @@ -125,3 +125,7 @@ static struct pci_driver denali_pci_driv .remove = denali_pci_remove, }; module_pci_driver(denali_pci_driver); + +MODULE_DESCRIPTION("PCI driver for Denali NAND controller"); +MODULE_AUTHOR("Intel Corporation and its suppliers"); +MODULE_LICENSE("GPL v2"); Patches currently in stable-queue which might be from jc(a)linux.com are queue-4.15/gpio-iop-add-missing-module_description-author-license.patch queue-4.15/power-reset-zx-reboot-add-missing-module_description-author-license.patch queue-4.15/gpio-ath79-add-missing-module_description-license.patch queue-4.15/mtd-nand-denali_pci-add-missing-module_description-author-license.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "HID: wacom: EKR: ensure devres groups at higher indexes are released" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled HID: wacom: EKR: ensure devres groups at higher indexes are released to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hid-wacom-ekr-ensure-devres-groups-at-higher-indexes-are-released.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 791ae273731fa85d3332e45064dab177ae663e80 Mon Sep 17 00:00:00 2001 From: Aaron Armstrong Skomra <skomra(a)gmail.com> Date: Thu, 7 Dec 2017 12:31:56 -0800 Subject: HID: wacom: EKR: ensure devres groups at higher indexes are released From: Aaron Armstrong Skomra <skomra(a)gmail.com> commit 791ae273731fa85d3332e45064dab177ae663e80 upstream. Background: ExpressKey Remotes communicate their events via usb dongle. Each dongle can hold up to 5 pairings at one time and one EKR (identified by its serial number) can unfortunately be paired with its dongle more than once. The pairing takes place in a round-robin fashion. Input devices are only created once per EKR, when a new serial number is seen in the list of pairings. However, if a device is created for a "higher" paring index and subsequently a second pairing occurs at a lower pairing index, unpairing the remote with that serial number from any pairing index will currently cause a driver crash. This occurs infrequently, as two remotes are necessary to trigger this bug and most users have only one remote. As an illustration, to trigger the bug you need to have two remotes, and pair them in this order: 1. slot 0 -> remote 1 (input device created for remote 1) 2. slot 1 -> remote 1 (duplicate pairing - no device created) 3. slot 2 -> remote 1 (duplicate pairing - no device created) 4. slot 3 -> remote 1 (duplicate pairing - no device created) 5. slot 4 -> remote 2 (input device created for remote 2) 6. slot 0 -> remote 2 (1 destroyed and recreated at slot 1) 7. slot 1 -> remote 2 (1 destroyed and recreated at slot 2) 8. slot 2 -> remote 2 (1 destroyed and recreated at slot 3) 9. slot 3 -> remote 2 (1 destroyed and not recreated) 10. slot 4 -> remote 2 (2 was already in this slot so no changes) 11. slot 0 -> remote 1 (The current code sees remote 2 was paired over in one of the dongle slots it occupied and attempts to remove all information about remote 2 [1]. It calls wacom_remote_destroy_one for remote 2, but the destroy function assumes the lowest index is where the remote's input device was created. The code "cleans up" the other remote 2 pairings including the one which the input device was based on, assuming they were were just duplicate pairings. However, the cleanup doesn't call the devres release function for the input device that was created in slot 4). This issue is fixed by this commit. [1] Remote 2 should subsequently be re-created on the next packet from the EKR at the lowest numbered slot that it occupies (here slot 1). Fixes: f9036bd43602 ("HID: wacom: EKR: use devres groups to manage resources") Signed-off-by: Aaron Armstrong Skomra <aaron.skomra(a)wacom.com> Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hid/wacom_sys.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -2347,23 +2347,23 @@ static void wacom_remote_destroy_one(str int i; unsigned long flags; - spin_lock_irqsave(&remote->remote_lock, flags); - remote->remotes[index].registered = false; - spin_unlock_irqrestore(&remote->remote_lock, flags); + for (i = 0; i < WACOM_MAX_REMOTES; i++) { + if (remote->remotes[i].serial == serial) { - if (remote->remotes[index].battery.battery) - devres_release_group(&wacom->hdev->dev, - &remote->remotes[index].battery.bat_desc); + spin_lock_irqsave(&remote->remote_lock, flags); + remote->remotes[i].registered = false; + spin_unlock_irqrestore(&remote->remote_lock, flags); - if (remote->remotes[index].group.name) - devres_release_group(&wacom->hdev->dev, - &remote->remotes[index]); + if (remote->remotes[i].battery.battery) + devres_release_group(&wacom->hdev->dev, + &remote->remotes[i].battery.bat_desc); + + if (remote->remotes[i].group.name) + devres_release_group(&wacom->hdev->dev, + &remote->remotes[i]); - for (i = 0; i < WACOM_MAX_REMOTES; i++) { - if (remote->remotes[i].serial == serial) { remote->remotes[i].serial = 0; remote->remotes[i].group.name = NULL; - remote->remotes[i].registered = false; remote->remotes[i].battery.battery = NULL; wacom->led.groups[i].select = WACOM_STATUS_UNKNOWN; } Patches currently in stable-queue which might be from skomra(a)gmail.com are queue-4.15/hid-wacom-ekr-ensure-devres-groups-at-higher-indexes-are-released.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "gpio: stmpe: i2c transfer are forbiden in atomic context" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled gpio: stmpe: i2c transfer are forbiden in atomic context to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: gpio-stmpe-i2c-transfer-are-forbiden-in-atomic-context.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b888fb6f2a278442933e3bfab70262e9a5365fb3 Mon Sep 17 00:00:00 2001 From: Patrice Chotard <patrice.chotard(a)st.com> Date: Fri, 12 Jan 2018 13:16:08 +0100 Subject: gpio: stmpe: i2c transfer are forbiden in atomic context From: Patrice Chotard <patrice.chotard(a)st.com> commit b888fb6f2a278442933e3bfab70262e9a5365fb3 upstream. Move the workaround from stmpe_gpio_irq_unmask() which is executed in atomic context to stmpe_gpio_irq_sync_unlock() which is not. It fixes the following issue: [ 1.500000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.500000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc2-00020-gbd4301f-dirty #28 [ 1.520000] Hardware name: STM32 (Device Tree Support) [ 1.520000] [<0000bfc9>] (unwind_backtrace) from [<0000b347>] (show_stack+0xb/0xc) [ 1.530000] [<0000b347>] (show_stack) from [<0001fc49>] (__schedule_bug+0x39/0x58) [ 1.530000] [<0001fc49>] (__schedule_bug) from [<00168211>] (__schedule+0x23/0x2b2) [ 1.550000] [<00168211>] (__schedule) from [<001684f7>] (schedule+0x57/0x64) [ 1.550000] [<001684f7>] (schedule) from [<0016a513>] (schedule_timeout+0x137/0x164) [ 1.550000] [<0016a513>] (schedule_timeout) from [<00168b91>] (wait_for_common+0x8d/0xfc) [ 1.570000] [<00168b91>] (wait_for_common) from [<00139753>] (stm32f4_i2c_xfer+0xe9/0xfe) [ 1.580000] [<00139753>] (stm32f4_i2c_xfer) from [<00138545>] (__i2c_transfer+0x111/0x148) [ 1.590000] [<00138545>] (__i2c_transfer) from [<001385cf>] (i2c_transfer+0x53/0x70) [ 1.590000] [<001385cf>] (i2c_transfer) from [<001388a5>] (i2c_smbus_xfer+0x12f/0x36e) [ 1.600000] [<001388a5>] (i2c_smbus_xfer) from [<00138b49>] (i2c_smbus_read_byte_data+0x1f/0x2a) [ 1.610000] [<00138b49>] (i2c_smbus_read_byte_data) from [<00124fdd>] (__stmpe_reg_read+0xd/0x24) [ 1.620000] [<00124fdd>] (__stmpe_reg_read) from [<001252b3>] (stmpe_reg_read+0x19/0x24) [ 1.630000] [<001252b3>] (stmpe_reg_read) from [<0002c4d1>] (unmask_irq+0x17/0x22) [ 1.640000] [<0002c4d1>] (unmask_irq) from [<0002c57f>] (irq_startup+0x6f/0x78) [ 1.650000] [<0002c57f>] (irq_startup) from [<0002b7a1>] (__setup_irq+0x319/0x47c) [ 1.650000] [<0002b7a1>] (__setup_irq) from [<0002bad3>] (request_threaded_irq+0x6b/0xe8) [ 1.660000] [<0002bad3>] (request_threaded_irq) from [<0002d0b9>] (devm_request_threaded_irq+0x3b/0x6a) [ 1.670000] [<0002d0b9>] (devm_request_threaded_irq) from [<001446e7>] (mmc_gpiod_request_cd_irq+0x49/0x8a) [ 1.680000] [<001446e7>] (mmc_gpiod_request_cd_irq) from [<0013d45d>] (mmc_start_host+0x49/0x60) [ 1.690000] [<0013d45d>] (mmc_start_host) from [<0013e40b>] (mmc_add_host+0x3b/0x54) [ 1.700000] [<0013e40b>] (mmc_add_host) from [<00148119>] (mmci_probe+0x4d1/0x60c) [ 1.710000] [<00148119>] (mmci_probe) from [<000f903b>] (amba_probe+0x7b/0xbe) [ 1.720000] [<000f903b>] (amba_probe) from [<001170e5>] (driver_probe_device+0x169/0x1f8) [ 1.730000] [<001170e5>] (driver_probe_device) from [<001171b7>] (__driver_attach+0x43/0x5c) [ 1.740000] [<001171b7>] (__driver_attach) from [<0011618d>] (bus_for_each_dev+0x3d/0x46) [ 1.740000] [<0011618d>] (bus_for_each_dev) from [<001165cd>] (bus_add_driver+0xcd/0x124) [ 1.740000] [<001165cd>] (bus_add_driver) from [<00117713>] (driver_register+0x4d/0x7a) [ 1.760000] [<00117713>] (driver_register) from [<001fc765>] (do_one_initcall+0xbd/0xe8) [ 1.770000] [<001fc765>] (do_one_initcall) from [<001fc88b>] (kernel_init_freeable+0xfb/0x134) [ 1.780000] [<001fc88b>] (kernel_init_freeable) from [<00167ee3>] (kernel_init+0x7/0x9c) [ 1.790000] [<00167ee3>] (kernel_init) from [<00009b65>] (ret_from_fork+0x11/0x2c) Signed-off-by: Alexandre TORGUE <alexandre.torgue(a)st.com> Signed-off-by: Patrice Chotard <patrice.chotard(a)st.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpio/gpio-stmpe.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -190,6 +190,16 @@ static void stmpe_gpio_irq_sync_unlock(s }; int i, j; + /* + * STMPE1600: to be able to get IRQ from pins, + * a read must be done on GPMR register, or a write in + * GPSR or GPCR registers + */ + if (stmpe->partnum == STMPE1600) { + stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_LSB]); + stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_GPMR_CSB]); + } + for (i = 0; i < CACHE_NR_REGS; i++) { /* STMPE801 and STMPE1600 don't have RE and FE registers */ if ((stmpe->partnum == STMPE801 || @@ -227,21 +237,11 @@ static void stmpe_gpio_irq_unmask(struct { struct gpio_chip *gc = irq_data_get_irq_chip_data(d); struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); - struct stmpe *stmpe = stmpe_gpio->stmpe; int offset = d->hwirq; int regoffset = offset / 8; int mask = BIT(offset % 8); stmpe_gpio->regs[REG_IE][regoffset] |= mask; - - /* - * STMPE1600 workaround: to be able to get IRQ from pins, - * a read must be done on GPMR register, or a write in - * GPSR or GPCR registers - */ - if (stmpe->partnum == STMPE1600) - stmpe_reg_read(stmpe, - stmpe->regs[STMPE_IDX_GPMR_LSB + regoffset]); } static void stmpe_dbg_show_one(struct seq_file *s, Patches currently in stable-queue which might be from patrice.chotard(a)st.com are queue-4.15/gpio-stmpe-i2c-transfer-are-forbiden-in-atomic-context.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: gpio-iop-add-missing-module_description-author-license.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 97b03136e1b637d7a9d2274c099e44ecf23f1103 Mon Sep 17 00:00:00 2001 From: Jesse Chan <jc(a)linux.com> Date: Mon, 20 Nov 2017 12:54:52 -0800 Subject: gpio: iop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE From: Jesse Chan <jc(a)linux.com> commit 97b03136e1b637d7a9d2274c099e44ecf23f1103 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc(a)linux.com> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpio/gpio-iop.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/gpio/gpio-iop.c +++ b/drivers/gpio/gpio-iop.c @@ -58,3 +58,7 @@ static int __init iop3xx_gpio_init(void) return platform_driver_register(&iop3xx_gpio_driver); } arch_initcall(iop3xx_gpio_init); + +MODULE_DESCRIPTION("GPIO handling for Intel IOP3xx processors"); +MODULE_AUTHOR("Lennert Buytenhek <buytenh(a)wantstofly.org>"); +MODULE_LICENSE("GPL"); Patches currently in stable-queue which might be from jc(a)linux.com are queue-4.15/gpio-iop-add-missing-module_description-author-license.patch queue-4.15/power-reset-zx-reboot-add-missing-module_description-author-license.patch queue-4.15/gpio-ath79-add-missing-module_description-license.patch queue-4.15/mtd-nand-denali_pci-add-missing-module_description-author-license.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "gpio: Fix kernel stack leak to userspace" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled gpio: Fix kernel stack leak to userspace to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: gpio-fix-kernel-stack-leak-to-userspace.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 24bd3efc9d1efb5f756a7c6f807a36ddb6adc671 Mon Sep 17 00:00:00 2001 From: Linus Walleij <linus.walleij(a)linaro.org> Date: Mon, 22 Jan 2018 13:19:28 +0100 Subject: gpio: Fix kernel stack leak to userspace From: Linus Walleij <linus.walleij(a)linaro.org> commit 24bd3efc9d1efb5f756a7c6f807a36ddb6adc671 upstream. The GPIO event descriptor was leaking kernel stack to userspace because we don't zero the variable before use. Ooops. Fix this. Reported-by: Arnd Bergmann <arnd(a)arndb.de> Reviewed-by: Bartosz Golaszewski <brgl(a)bgdev.pl> Reviewed-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpio/gpiolib.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -732,6 +732,9 @@ static irqreturn_t lineevent_irq_thread( struct gpioevent_data ge; int ret, level; + /* Do not leak kernel stack to userspace */ + memset(&ge, 0, sizeof(ge)); + ge.timestamp = ktime_get_real_ns(); level = gpiod_get_value_cansleep(le->desc); Patches currently in stable-queue which might be from linus.walleij(a)linaro.org are queue-4.15/gpio-iop-add-missing-module_description-author-license.patch queue-4.15/tools-gpio-fix-build-error-with-musl-libc.patch queue-4.15/gpio-fix-kernel-stack-leak-to-userspace.patch queue-4.15/gpio-ath79-add-missing-module_description-license.patch queue-4.15/gpio-stmpe-i2c-transfer-are-forbiden-in-atomic-context.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: gpio-ath79-add-missing-module_description-license.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 539340f37e6d6ed4cd93e8e18c9b2e4eafd4b842 Mon Sep 17 00:00:00 2001 From: Jesse Chan <jc(a)linux.com> Date: Mon, 20 Nov 2017 12:54:26 -0800 Subject: gpio: ath79: add missing MODULE_DESCRIPTION/LICENSE From: Jesse Chan <jc(a)linux.com> commit 539340f37e6d6ed4cd93e8e18c9b2e4eafd4b842 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION is also added. Signed-off-by: Jesse Chan <jc(a)linux.com> Acked-by: Alban Bedel <albeu(a)free.fr> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpio/gpio-ath79.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/gpio/gpio-ath79.c +++ b/drivers/gpio/gpio-ath79.c @@ -324,3 +324,6 @@ static struct platform_driver ath79_gpio }; module_platform_driver(ath79_gpio_driver); + +MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support"); +MODULE_LICENSE("GPL v2"); Patches currently in stable-queue which might be from jc(a)linux.com are queue-4.15/gpio-iop-add-missing-module_description-author-license.patch queue-4.15/power-reset-zx-reboot-add-missing-module_description-author-license.patch queue-4.15/gpio-ath79-add-missing-module_description-license.patch queue-4.15/mtd-nand-denali_pci-add-missing-module_description-author-license.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "crypto: inside-secure - fix hash when length is a multiple of a block" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: inside-secure - fix hash when length is a multiple of a block to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-inside-secure-fix-hash-when-length-is-a-multiple-of-a-block.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 809778e02cd45d0625439fee67688f655627bb3c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Antoine=20T=C3=A9nart?= <antoine.tenart(a)free-electrons.com> Date: Tue, 26 Dec 2017 17:21:17 +0100 Subject: crypto: inside-secure - fix hash when length is a multiple of a block From: Antoine Tenart <antoine.tenart(a)free-electrons.com> commit 809778e02cd45d0625439fee67688f655627bb3c upstream. This patch fixes the hash support in the SafeXcel driver when the update size is a multiple of a block size, and when a final call is made just after with a size of 0. In such cases the driver should cache the last block from the update to avoid handling 0 length data on the final call (that's a hardware limitation). Fixes: 1b44c5a60c13 ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver") Signed-off-by: Antoine Tenart <antoine.tenart(a)free-electrons.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/crypto/inside-secure/safexcel_hash.c | 34 +++++++++++++++++++-------- 1 file changed, 24 insertions(+), 10 deletions(-) --- a/drivers/crypto/inside-secure/safexcel_hash.c +++ b/drivers/crypto/inside-secure/safexcel_hash.c @@ -186,17 +186,31 @@ static int safexcel_ahash_send_req(struc else cache_len = queued - areq->nbytes; - /* - * If this is not the last request and the queued data does not fit - * into full blocks, cache it for the next send() call. - */ - extra = queued & (crypto_ahash_blocksize(ahash) - 1); - if (!req->last_req && extra) { - sg_pcopy_to_buffer(areq->src, sg_nents(areq->src), - req->cache_next, extra, areq->nbytes - extra); + if (!req->last_req) { + /* If this is not the last request and the queued data does not + * fit into full blocks, cache it for the next send() call. + */ + extra = queued & (crypto_ahash_blocksize(ahash) - 1); + if (!extra) + /* If this is not the last request and the queued data + * is a multiple of a block, cache the last one for now. + */ + extra = queued - crypto_ahash_blocksize(ahash); - queued -= extra; - len -= extra; + if (extra) { + sg_pcopy_to_buffer(areq->src, sg_nents(areq->src), + req->cache_next, extra, + areq->nbytes - extra); + + queued -= extra; + len -= extra; + + if (!queued) { + *commands = 0; + *results = 0; + return 0; + } + } } spin_lock_bh(&priv->ring[ring].egress_lock); Patches currently in stable-queue which might be from antoine.tenart(a)free-electrons.com are queue-4.15/crypto-inside-secure-avoid-unmapping-dma-memory-that-was-not-mapped.patch queue-4.15/crypto-inside-secure-fix-hash-when-length-is-a-multiple-of-a-block.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "crypto: sha3-generic - fixes for alignment and big endian operation" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: sha3-generic - fixes for alignment and big endian operation to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-sha3-generic-fixes-for-alignment-and-big-endian-operation.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c013cee99d5a18aec8c71fee8f5f41369cd12595 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Date: Fri, 19 Jan 2018 12:04:33 +0000 Subject: crypto: sha3-generic - fixes for alignment and big endian operation From: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> commit c013cee99d5a18aec8c71fee8f5f41369cd12595 upstream. Ensure that the input is byte swabbed before injecting it into the SHA3 transform. Use the get_unaligned() accessor for this so that we don't perform unaligned access inadvertently on architectures that do not support that. Fixes: 53964b9ee63b7075 ("crypto: sha3 - Add SHA-3 hash algorithm") Signed-off-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/sha3_generic.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) --- a/crypto/sha3_generic.c +++ b/crypto/sha3_generic.c @@ -18,6 +18,7 @@ #include <linux/types.h> #include <crypto/sha3.h> #include <asm/byteorder.h> +#include <asm/unaligned.h> #define KECCAK_ROUNDS 24 @@ -149,7 +150,7 @@ static int sha3_update(struct shash_desc unsigned int i; for (i = 0; i < sctx->rsizw; i++) - sctx->st[i] ^= ((u64 *) src)[i]; + sctx->st[i] ^= get_unaligned_le64(src + 8 * i); keccakf(sctx->st); done += sctx->rsiz; @@ -174,7 +175,7 @@ static int sha3_final(struct shash_desc sctx->buf[sctx->rsiz - 1] |= 0x80; for (i = 0; i < sctx->rsizw; i++) - sctx->st[i] ^= ((u64 *) sctx->buf)[i]; + sctx->st[i] ^= get_unaligned_le64(sctx->buf + 8 * i); keccakf(sctx->st); Patches currently in stable-queue which might be from ard.biesheuvel(a)linaro.org are queue-4.15/crypto-sha3-generic-fixes-for-alignment-and-big-endian-operation.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "crypto: ecdh - fix typo in KPP dependency of CRYPTO_ECDH" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: ecdh - fix typo in KPP dependency of CRYPTO_ECDH to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-ecdh-fix-typo-in-kpp-dependency-of-crypto_ecdh.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b5b9007730ce1d90deaf25d7f678511550744bdc Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens <hauke(a)hauke-m.de> Date: Sun, 26 Nov 2017 00:16:46 +0100 Subject: crypto: ecdh - fix typo in KPP dependency of CRYPTO_ECDH From: Hauke Mehrtens <hauke(a)hauke-m.de> commit b5b9007730ce1d90deaf25d7f678511550744bdc upstream. This fixes a typo in the CRYPTO_KPP dependency of CRYPTO_ECDH. Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") Signed-off-by: Hauke Mehrtens <hauke(a)hauke-m.de> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -130,7 +130,7 @@ config CRYPTO_DH config CRYPTO_ECDH tristate "ECDH algorithm" - select CRYTPO_KPP + select CRYPTO_KPP select CRYPTO_RNG_DEFAULT help Generic implementation of the ECDH algorithm Patches currently in stable-queue which might be from hauke(a)hauke-m.de are queue-4.15/crypto-ecdh-fix-typo-in-kpp-dependency-of-crypto_ecdh.patch

7 years, 3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror