- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-x86-ioapic-fix-level-triggered-eoi-and-ioapic-reconfigure-race.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Nikita Leshenko <nikita.leshchenko(a)oracle.com> Date: Sun, 5 Nov 2017 15:52:29 +0200 Subject: KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC reconfigure race From: Nikita Leshenko <nikita.leshchenko(a)oracle.com> [ Upstream commit 0fc5a36dd6b345eb0d251a65c236e53bead3eef7 ] KVM uses ioapic_handled_vectors to track vectors that need to notify the IOAPIC on EOI. The problem is that IOAPIC can be reconfigured while an interrupt with old configuration is pending or running and ioapic_handled_vectors only remembers the newest configuration; thus EOI from the old interrupt is not delievered to the IOAPIC. A previous commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") addressed this issue by adding pending edge-triggered interrupts to ioapic_handled_vectors, fixing this race for edge-triggered interrupts. The commit explicitly ignored level-triggered interrupts, but this race applies to them as well: 1) IOAPIC sends a level triggered interrupt vector to VCPU0 2) VCPU0's handler deasserts the irq line and reconfigures the IOAPIC to route the vector to VCPU1. The reconfiguration rewrites only the upper 32 bits of the IOREDTBLn register. (Causes KVM to update ioapic_handled_vectors for VCPU0 and it no longer includes the vector.) 3) VCPU0 sends EOI for the vector, but it's not delievered to the IOAPIC because the ioapic_handled_vectors doesn't include the vector. 4) New interrupts are not delievered to VCPU1 because remote_irr bit is set forever. Therefore, the correct behavior is to add all pending and running interrupts to ioapic_handled_vectors. This commit introduces a slight performance hit similar to commit db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") for the rare case that the vector is reused by a non-IOAPIC source on VCPU0. We prefer to keep solution simple and not handle this case just as the original commit does. Fixes: db2bdcbbbd32 ("KVM: x86: fix edge EOI and IOAPIC reconfig race") Signed-off-by: Nikita Leshenko <nikita.leshchenko(a)oracle.com> Reviewed-by: Liran Alon <liran.alon(a)oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Signed-off-by: Radim Krčmář <rkrcmar(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/ioapic.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/arch/x86/kvm/ioapic.c +++ b/arch/x86/kvm/ioapic.c @@ -247,8 +247,7 @@ void kvm_ioapic_scan_entry(struct kvm_vc index == RTC_GSI) { if (kvm_apic_match_dest(vcpu, NULL, 0, e->fields.dest_id, e->fields.dest_mode) || - (e->fields.trig_mode == IOAPIC_EDGE_TRIG && - kvm_apic_pending_eoi(vcpu, e->fields.vector))) + kvm_apic_pending_eoi(vcpu, e->fields.vector)) __set_bit(e->fields.vector, (unsigned long *)eoi_exit_bitmap); } Patches currently in stable-queue which might be from nikita.leshchenko(a)oracle.com are queue-4.4/kvm-x86-don-t-re-execute-instruction-when-not-passing-cr2-value.patch queue-4.4/kvm-x86-ioapic-preserve-read-only-values-in-the-redirection-table.patch queue-4.4/kvm-x86-ioapic-fix-level-triggered-eoi-and-ioapic-reconfigure-race.patch queue-4.4/kvm-x86-emulator-return-to-user-mode-on-l1-cpl-0-emulation-failure.patch queue-4.4/kvm-x86-ioapic-clear-remote-irr-when-entry-is-switched-to-edge-triggered.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-x86-ioapic-clear-remote-irr-when-entry-is-switched-to-edge-triggered.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Nikita Leshenko <nikita.leshchenko(a)oracle.com> Date: Sun, 5 Nov 2017 15:52:32 +0200 Subject: KVM: x86: ioapic: Clear Remote IRR when entry is switched to edge-triggered From: Nikita Leshenko <nikita.leshchenko(a)oracle.com> [ Upstream commit a8bfec2930525808c01f038825d1df3904638631 ] Some OSes (Linux, Xen) use this behavior to clear the Remote IRR bit for IOAPICs without an EOI register. They simulate the EOI message manually by changing the trigger mode to edge and then back to level, with the entry being masked during this. QEMU implements this feature in commit ed1263c363c9 ("ioapic: clear remote irr bit for edge-triggered interrupts") As a side effect, this commit removes an incorrect behavior where Remote IRR was cleared when the redirection table entry was rewritten. This is not consistent with the manual and also opens an opportunity for a strange behavior when a redirection table entry is modified from an interrupt handler that handles the same entry: The modification will clear the Remote IRR bit even though the interrupt handler is still running. Signed-off-by: Nikita Leshenko <nikita.leshchenko(a)oracle.com> Reviewed-by: Liran Alon <liran.alon(a)oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li(a)hotmail.com> Reviewed-by: Steve Rutherford <srutherford(a)google.com> Signed-off-by: Radim Krčmář <rkrcmar(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/ioapic.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) --- a/arch/x86/kvm/ioapic.c +++ b/arch/x86/kvm/ioapic.c @@ -296,8 +296,17 @@ static void ioapic_write_indirect(struct } else { e->bits &= ~0xffffffffULL; e->bits |= (u32) val; - e->fields.remote_irr = 0; } + + /* + * Some OSes (Linux, Xen) assume that Remote IRR bit will + * be cleared by IOAPIC hardware when the entry is configured + * as edge-triggered. This behavior is used to simulate an + * explicit EOI on IOAPICs that don't have the EOI register. + */ + if (e->fields.trig_mode == IOAPIC_EDGE_TRIG) + e->fields.remote_irr = 0; + mask_after = e->fields.mask; if (mask_before != mask_after) kvm_fire_mask_notifiers(ioapic->kvm, KVM_IRQCHIP_IOAPIC, index, mask_after); Patches currently in stable-queue which might be from nikita.leshchenko(a)oracle.com are queue-4.4/kvm-x86-don-t-re-execute-instruction-when-not-passing-cr2-value.patch queue-4.4/kvm-x86-ioapic-preserve-read-only-values-in-the-redirection-table.patch queue-4.4/kvm-x86-ioapic-fix-level-triggered-eoi-and-ioapic-reconfigure-race.patch queue-4.4/kvm-x86-emulator-return-to-user-mode-on-l1-cpl-0-emulation-failure.patch queue-4.4/kvm-x86-ioapic-clear-remote-irr-when-entry-is-switched-to-edge-triggered.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: X86: Fix operand/address-size during instruction decoding" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: X86: Fix operand/address-size during instruction decoding to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-x86-fix-operand-address-size-during-instruction-decoding.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Wanpeng Li <wanpeng.li(a)hotmail.com> Date: Sun, 5 Nov 2017 16:54:47 -0800 Subject: KVM: X86: Fix operand/address-size during instruction decoding From: Wanpeng Li <wanpeng.li(a)hotmail.com> [ Upstream commit 3853be2603191829b442b64dac6ae8ba0c027bf9 ] Pedro reported: During tests that we conducted on KVM, we noticed that executing a "PUSH %ES" instruction under KVM produces different results on both memory and the SP register depending on whether EPT support is enabled. With EPT the SP is reduced by 4 bytes (and the written value is 0-padded) but without EPT support it is only reduced by 2 bytes. The difference can be observed when the CS.DB field is 1 (32-bit) but not when it's 0 (16-bit). The internal segment descriptor cache exist even in real/vm8096 mode. The CS.D also should be respected instead of just default operand/address-size/66H prefix/67H prefix during instruction decoding. This patch fixes it by also adjusting operand/address-size according to CS.D. Reported-by: Pedro Fonseca <pfonseca(a)cs.washington.edu> Tested-by: Pedro Fonseca <pfonseca(a)cs.washington.edu> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Radim Krčmář <rkrcmar(a)redhat.com> Cc: Nadav Amit <nadav.amit(a)gmail.com> Cc: Pedro Fonseca <pfonseca(a)cs.washington.edu> Signed-off-by: Wanpeng Li <wanpeng.li(a)hotmail.com> Reviewed-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Radim Krčmář <rkrcmar(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/emulate.c | 7 +++++++ 1 file changed, 7 insertions(+) --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -4978,6 +4978,8 @@ int x86_decode_insn(struct x86_emulate_c bool op_prefix = false; bool has_seg_override = false; struct opcode opcode; + u16 dummy; + struct desc_struct desc; ctxt->memop.type = OP_NONE; ctxt->memopp = NULL; @@ -4996,6 +4998,11 @@ int x86_decode_insn(struct x86_emulate_c switch (mode) { case X86EMUL_MODE_REAL: case X86EMUL_MODE_VM86: + def_op_bytes = def_ad_bytes = 2; + ctxt->ops->get_segment(ctxt, &dummy, &desc, NULL, VCPU_SREG_CS); + if (desc.d) + def_op_bytes = def_ad_bytes = 4; + break; case X86EMUL_MODE_PROT16: def_op_bytes = def_ad_bytes = 2; break; Patches currently in stable-queue which might be from wanpeng.li(a)hotmail.com are queue-4.4/kvm-x86-don-t-re-execute-instruction-when-not-passing-cr2-value.patch queue-4.4/kvm-x86-ioapic-preserve-read-only-values-in-the-redirection-table.patch queue-4.4/kvm-vmx-fix-rflags-cache-during-vcpu-reset.patch queue-4.4/kvm-x86-fix-operand-address-size-during-instruction-decoding.patch queue-4.4/kvm-x86-emulator-return-to-user-mode-on-l1-cpl-0-emulation-failure.patch queue-4.4/kvm-x86-ioapic-clear-remote-irr-when-entry-is-switched-to-edge-triggered.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failure" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failure to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-x86-emulator-return-to-user-mode-on-l1-cpl-0-emulation-failure.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Liran Alon <liran.alon(a)oracle.com> Date: Sun, 5 Nov 2017 16:56:33 +0200 Subject: KVM: x86: emulator: Return to user-mode on L1 CPL=0 emulation failure From: Liran Alon <liran.alon(a)oracle.com> [ Upstream commit 1f4dcb3b213235e642088709a1c54964d23365e9 ] On this case, handle_emulation_failure() fills kvm_run with internal-error information which it expects to be delivered to user-mode for further processing. However, the code reports a wrong return-value which makes KVM to never return to user-mode on this scenario. Fixes: 6d77dbfc88e3 ("KVM: inject #UD if instruction emulation fails and exit to userspace") Signed-off-by: Liran Alon <liran.alon(a)oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko(a)oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li(a)hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5153,7 +5153,7 @@ static int handle_emulation_failure(stru vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR; vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION; vcpu->run->internal.ndata = 0; - r = EMULATE_FAIL; + r = EMULATE_USER_EXIT; } kvm_queue_exception(vcpu, UD_VECTOR); Patches currently in stable-queue which might be from liran.alon(a)oracle.com are queue-4.4/kvm-x86-don-t-re-execute-instruction-when-not-passing-cr2-value.patch queue-4.4/kvm-x86-ioapic-preserve-read-only-values-in-the-redirection-table.patch queue-4.4/kvm-x86-ioapic-fix-level-triggered-eoi-and-ioapic-reconfigure-race.patch queue-4.4/kvm-x86-emulator-return-to-user-mode-on-l1-cpl-0-emulation-failure.patch queue-4.4/kvm-x86-ioapic-clear-remote-irr-when-entry-is-switched-to-edge-triggered.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: x86: Don't re-execute instruction when not passing CR2 value" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: x86: Don't re-execute instruction when not passing CR2 value to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-x86-don-t-re-execute-instruction-when-not-passing-cr2-value.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Liran Alon <liran.alon(a)oracle.com> Date: Sun, 5 Nov 2017 16:56:34 +0200 Subject: KVM: x86: Don't re-execute instruction when not passing CR2 value From: Liran Alon <liran.alon(a)oracle.com> [ Upstream commit 9b8ae63798cb97e785a667ff27e43fa6220cb734 ] In case of instruction-decode failure or emulation failure, x86_emulate_instruction() will call reexecute_instruction() which will attempt to use the cr2 value passed to x86_emulate_instruction(). However, when x86_emulate_instruction() is called from emulate_instruction(), cr2 is not passed (passed as 0) and therefore it doesn't make sense to execute reexecute_instruction() logic at all. Fixes: 51d8b66199e9 ("KVM: cleanup emulate_instruction") Signed-off-by: Liran Alon <liran.alon(a)oracle.com> Reviewed-by: Nikita Leshenko <nikita.leshchenko(a)oracle.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk(a)oracle.com> Reviewed-by: Wanpeng Li <wanpeng.li(a)hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/include/asm/kvm_host.h | 3 ++- arch/x86/kvm/vmx.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -998,7 +998,8 @@ int x86_emulate_instruction(struct kvm_v static inline int emulate_instruction(struct kvm_vcpu *vcpu, int emulation_type) { - return x86_emulate_instruction(vcpu, 0, emulation_type, NULL, 0); + return x86_emulate_instruction(vcpu, 0, + emulation_type | EMULTYPE_NO_REEXECUTE, NULL, 0); } void kvm_enable_efer_bits(u64); --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -6023,7 +6023,7 @@ static int handle_invalid_guest_state(st if (test_bit(KVM_REQ_EVENT, &vcpu->requests)) return 1; - err = emulate_instruction(vcpu, EMULTYPE_NO_REEXECUTE); + err = emulate_instruction(vcpu, 0); if (err == EMULATE_USER_EXIT) { ++vcpu->stat.mmio_exits; Patches currently in stable-queue which might be from liran.alon(a)oracle.com are queue-4.4/kvm-x86-don-t-re-execute-instruction-when-not-passing-cr2-value.patch queue-4.4/kvm-x86-ioapic-preserve-read-only-values-in-the-redirection-table.patch queue-4.4/kvm-x86-ioapic-fix-level-triggered-eoi-and-ioapic-reconfigure-race.patch queue-4.4/kvm-x86-emulator-return-to-user-mode-on-l1-cpl-0-emulation-failure.patch queue-4.4/kvm-x86-ioapic-clear-remote-irr-when-entry-is-switched-to-edge-triggered.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "KVM: VMX: Fix rflags cache during vCPU reset" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: VMX: Fix rflags cache during vCPU reset to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-vmx-fix-rflags-cache-during-vcpu-reset.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Wanpeng Li <wanpeng.li(a)hotmail.com> Date: Mon, 20 Nov 2017 14:52:21 -0800 Subject: KVM: VMX: Fix rflags cache during vCPU reset From: Wanpeng Li <wanpeng.li(a)hotmail.com> [ Upstream commit c37c28730bb031cc8a44a130c2555c0f3efbe2d0 ] Reported by syzkaller: *** Guest State *** CR0: actual=0x0000000080010031, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002061, shadow=0x0000000000000000, gh_mask=ffffffffffffe8f1 CR3 = 0x000000002081e000 RSP = 0x000000000000fffa RIP = 0x0000000000000000 RFLAGS=0x00023000 DR7 = 0x00000000000000 ^^^^^^^^^^ ------------[ cut here ]------------ WARNING: CPU: 6 PID: 24431 at /home/kernel/linux/arch/x86/kvm//x86.c:7302 kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] CPU: 6 PID: 24431 Comm: reprotest Tainted: G W OE 4.14.0+ #26 RIP: 0010:kvm_arch_vcpu_ioctl_run+0x651/0x2ea0 [kvm] RSP: 0018:ffff880291d179e0 EFLAGS: 00010202 Call Trace: kvm_vcpu_ioctl+0x479/0x880 [kvm] do_vfs_ioctl+0x142/0x9a0 SyS_ioctl+0x74/0x80 entry_SYSCALL_64_fastpath+0x23/0x9a The failed vmentry is triggered by the following beautified testcase: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { struct kvm_debugregs dr = { 0 }; r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_guest_debug debug = { .control = 0xf0403, .arch = { .debugreg[6] = 0x2, .debugreg[7] = 0x2 } }; ioctl(r[4], KVM_SET_GUEST_DEBUG, &debug); ioctl(r[4], KVM_RUN, 0); } which testcase tries to setup the processor specific debug registers and configure vCPU for handling guest debug events through KVM_SET_GUEST_DEBUG. The KVM_SET_GUEST_DEBUG ioctl will get and set rflags in order to set TF bit if single step is needed. All regs' caches are reset to avail and GUEST_RFLAGS vmcs field is reset to 0x2 during vCPU reset. However, the cache of rflags is not reset during vCPU reset. The function vmx_get_rflags() returns an unreset rflags cache value since the cache is marked avail, it is 0 after boot. Vmentry fails if the rflags reserved bit 1 is 0. This patch fixes it by resetting both the GUEST_RFLAGS vmcs field and its cache to 0x2 during vCPU reset. Reported-by: Dmitry Vyukov <dvyukov(a)google.com> Tested-by: Dmitry Vyukov <dvyukov(a)google.com> Reviewed-by: David Hildenbrand <david(a)redhat.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Radim Krčmář <rkrcmar(a)redhat.com> Cc: Nadav Amit <nadav.amit(a)gmail.com> Cc: Dmitry Vyukov <dvyukov(a)google.com> Signed-off-by: Wanpeng Li <wanpeng.li(a)hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/vmx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -4954,7 +4954,7 @@ static void vmx_vcpu_reset(struct kvm_vc vmcs_write64(GUEST_IA32_DEBUGCTL, 0); } - vmcs_writel(GUEST_RFLAGS, 0x02); + kvm_set_rflags(vcpu, X86_EFLAGS_FIXED); kvm_rip_write(vcpu, 0xfff0); vmcs_writel(GUEST_GDTR_BASE, 0); Patches currently in stable-queue which might be from wanpeng.li(a)hotmail.com are queue-4.4/kvm-x86-don-t-re-execute-instruction-when-not-passing-cr2-value.patch queue-4.4/kvm-x86-ioapic-preserve-read-only-values-in-the-redirection-table.patch queue-4.4/kvm-vmx-fix-rflags-cache-during-vcpu-reset.patch queue-4.4/kvm-x86-fix-operand-address-size-during-instruction-decoding.patch queue-4.4/kvm-x86-emulator-return-to-user-mode-on-l1-cpl-0-emulation-failure.patch queue-4.4/kvm-x86-ioapic-clear-remote-irr-when-entry-is-switched-to-edge-triggered.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "kmemleak: add scheduling point to kmemleak_scan()" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled kmemleak: add scheduling point to kmemleak_scan() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kmemleak-add-scheduling-point-to-kmemleak_scan.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Yisheng Xie <xieyisheng1(a)huawei.com> Date: Wed, 29 Nov 2017 16:11:08 -0800 Subject: kmemleak: add scheduling point to kmemleak_scan() From: Yisheng Xie <xieyisheng1(a)huawei.com> [ Upstream commit bde5f6bc68db51128f875a756e9082a6c6ff7b4c ] kmemleak_scan() will scan struct page for each node and it can be really large and resulting in a soft lockup. We have seen a soft lockup when do scan while compile kernel: watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287] [...] Call Trace: kmemleak_scan+0x21a/0x4c0 kmemleak_write+0x312/0x350 full_proxy_write+0x5a/0xa0 __vfs_write+0x33/0x150 vfs_write+0xad/0x1a0 SyS_write+0x52/0xc0 do_syscall_64+0x61/0x1a0 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by adding cond_resched every MAX_SCAN_SIZE. Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huaw… Signed-off-by: Yisheng Xie <xieyisheng1(a)huawei.com> Suggested-by: Catalin Marinas <catalin.marinas(a)arm.com> Acked-by: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Michal Hocko <mhocko(a)kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- mm/kmemleak.c | 2 ++ 1 file changed, 2 insertions(+) --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1394,6 +1394,8 @@ static void kmemleak_scan(void) if (page_count(page) == 0) continue; scan_block(page, page + 1, NULL); + if (!(pfn % (MAX_SCAN_SIZE / sizeof(*page)))) + cond_resched(); } } put_online_mems(); Patches currently in stable-queue which might be from xieyisheng1(a)huawei.com are queue-4.4/kmemleak-add-scheduling-point-to-kmemleak_scan.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "hwmon: (pmbus) Use 64bit math for DIRECT format values" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled hwmon: (pmbus) Use 64bit math for DIRECT format values to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hwmon-pmbus-use-64bit-math-for-direct-format-values.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Robert Lippert <roblip(a)gmail.com> Date: Mon, 27 Nov 2017 15:51:55 -0800 Subject: hwmon: (pmbus) Use 64bit math for DIRECT format values From: Robert Lippert <roblip(a)gmail.com> [ Upstream commit bd467e4eababe4c04272c1e646f066db02734c79 ] Power values in the 100s of watt range can easily blow past 32bit math limits when processing everything in microwatts. Use 64bit math instead to avoid these issues on common 32bit ARM BMC platforms. Fixes: 442aba78728e ("hwmon: PMBus device driver") Signed-off-by: Robert Lippert <rlippert(a)google.com> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/hwmon/pmbus/pmbus_core.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -20,6 +20,7 @@ */ #include <linux/kernel.h> +#include <linux/math64.h> #include <linux/module.h> #include <linux/init.h> #include <linux/err.h> @@ -476,8 +477,8 @@ static long pmbus_reg2data_linear(struct static long pmbus_reg2data_direct(struct pmbus_data *data, struct pmbus_sensor *sensor) { - long val = (s16) sensor->data; - long m, b, R; + s64 b, val = (s16)sensor->data; + s32 m, R; m = data->info->m[sensor->class]; b = data->info->b[sensor->class]; @@ -505,11 +506,12 @@ static long pmbus_reg2data_direct(struct R--; } while (R < 0) { - val = DIV_ROUND_CLOSEST(val, 10); + val = div_s64(val + 5LL, 10L); /* round closest */ R++; } - return (val - b) / m; + val = div_s64(val - b, m); + return clamp_val(val, LONG_MIN, LONG_MAX); } /* @@ -629,7 +631,8 @@ static u16 pmbus_data2reg_linear(struct static u16 pmbus_data2reg_direct(struct pmbus_data *data, struct pmbus_sensor *sensor, long val) { - long m, b, R; + s64 b, val64 = val; + s32 m, R; m = data->info->m[sensor->class]; b = data->info->b[sensor->class]; @@ -646,18 +649,18 @@ static u16 pmbus_data2reg_direct(struct R -= 3; /* Adjust R and b for data in milli-units */ b *= 1000; } - val = val * m + b; + val64 = val64 * m + b; while (R > 0) { - val *= 10; + val64 *= 10; R--; } while (R < 0) { - val = DIV_ROUND_CLOSEST(val, 10); + val64 = div_s64(val64 + 5LL, 10L); /* round closest */ R++; } - return val; + return (u16)clamp_val(val64, S16_MIN, S16_MAX); } static u16 pmbus_data2reg_vid(struct pmbus_data *data, Patches currently in stable-queue which might be from roblip(a)gmail.com are queue-4.4/hwmon-pmbus-use-64bit-math-for-direct-format-values.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "grace: replace BUG_ON by WARN_ONCE in exit_net hook" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled grace: replace BUG_ON by WARN_ONCE in exit_net hook to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: grace-replace-bug_on-by-warn_once-in-exit_net-hook.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Vasily Averin <vvs(a)virtuozzo.com> Date: Mon, 6 Nov 2017 16:22:48 +0300 Subject: grace: replace BUG_ON by WARN_ONCE in exit_net hook From: Vasily Averin <vvs(a)virtuozzo.com> [ Upstream commit b872285751c1af010e12d02bce7069e2061a58ca ] Signed-off-by: Vasily Averin <vvs(a)virtuozzo.com> Signed-off-by: J. Bruce Fields <bfields(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs_common/grace.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/fs/nfs_common/grace.c +++ b/fs/nfs_common/grace.c @@ -104,7 +104,9 @@ grace_exit_net(struct net *net) { struct list_head *grace_list = net_generic(net, grace_net_id); - BUG_ON(!list_empty(grace_list)); + WARN_ONCE(!list_empty(grace_list), + "net %x %s: grace_list is not empty\n", + net->ns.inum, __func__); } static struct pernet_operations grace_net_ops = { Patches currently in stable-queue which might be from vvs(a)virtuozzo.com are queue-4.4/lockd-fix-list_add-double-add-caused-by-legacy-signal-interface.patch queue-4.4/grace-replace-bug_on-by-warn_once-in-exit_net-hook.patch

7 years, 3 months

1
0
0 0

[Linux-stable-mirror] Patch "drm/omap: Fix error handling path in 'omap_dmm_probe()'" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/omap: Fix error handling path in 'omap_dmm_probe()' to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-omap-fix-error-handling-path-in-omap_dmm_probe.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Feb 1 14:14:46 CET 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Sun, 24 Sep 2017 08:01:03 +0200 Subject: drm/omap: Fix error handling path in 'omap_dmm_probe()' From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 8677b1ac2db021ab30bb1fa34f1e56ebe0051ec3 ] If we don't find a matching device node, we must free the memory allocated in 'omap_dmm' a few lines above. Fixes: 7cb0d6c17b96 ("drm/omap: fix TILER on OMAP5") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: Tomi Valkeinen <tomi.valkeinen(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c +++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c @@ -611,7 +611,8 @@ static int omap_dmm_probe(struct platfor match = of_match_node(dmm_of_match, dev->dev.of_node); if (!match) { dev_err(&dev->dev, "failed to find matching device node\n"); - return -ENODEV; + ret = -ENODEV; + goto fail; } omap_dmm->plat_data = match->data; Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-4.4/drm-omap-fix-error-handling-path-in-omap_dmm_probe.patch

7 years, 3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror