This is a note to let you know that I've just added the patch titled
iommu/vt-d: Fix scatterlist offset handling
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
iommu-vt-d-fix-scatterlist-offset-handling.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 29a90b70893817e2f2bb3cea40a29f5308e21b21 Mon Sep 17 00:00:00 2001
From: Robin Murphy <robin.murphy(a)arm.com>
Date: Thu, 28 Sep 2017 15:14:01 +0100
Subject: iommu/vt-d: Fix scatterlist offset handling
From: Robin Murphy <robin.murphy(a)arm.com>
commit 29a90b70893817e2f2bb3cea40a29f5308e21b21 upstream.
The intel-iommu DMA ops fail to correctly handle scatterlists where
sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed
appropriately based on the page-aligned portion of the offset, but the
mapping is set up relative to sg->page, which means it fails to actually
cover the whole buffer (and in the worst case doesn't cover it at all):
(sg->dma_address + sg->dma_len) ----+
sg->dma_address ---------+ |
iov_pfn------+ | |
| | |
v v v
iova: a b c d e f
|--------|--------|--------|--------|--------|
<...calculated....>
[_____mapped______]
pfn: 0 1 2 3 4 5
|--------|--------|--------|--------|--------|
^ ^ ^
| | |
sg->page ----+ | |
sg->offset --------------+ |
(sg->offset + sg->length) ----------+
As a result, the caller ends up overrunning the mapping into whatever
lies beyond, which usually goes badly:
[ 429.645492] DMAR: DRHD: handling fault status reg 2
[ 429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ...
Whilst this is a fairly rare occurrence, it can happen from the result
of intermediate scatterlist processing such as scatterwalk_ffwd() in the
crypto layer. Whilst that particular site could be fixed up, it still
seems worthwhile to bring intel-iommu in line with other DMA API
implementations in handling this robustly.
To that end, fix the intel_map_sg() path to line up the mapping
correctly (in units of MM pages rather than VT-d pages to match the
aligned_nrpages() calculation) regardless of the offset, and use
sg_phys() consistently for clarity.
Reported-by: Harsh Jain <Harsh(a)chelsio.com>
Signed-off-by: Robin Murphy <robin.murphy(a)arm.com>
Reviewed by: Ashok Raj <ashok.raj(a)intel.com>
Tested by: Jacob Pan <jacob.jun.pan(a)intel.com>
Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/iommu/intel-iommu.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -2016,10 +2016,12 @@ static int __domain_mapping(struct dmar_
uint64_t tmp;
if (!sg_res) {
+ unsigned int pgoff = sg->offset & ~PAGE_MASK;
+
sg_res = aligned_nrpages(sg->offset, sg->length);
- sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + sg->offset;
+ sg->dma_address = ((dma_addr_t)iov_pfn << VTD_PAGE_SHIFT) + pgoff;
sg->dma_length = sg->length;
- pteval = page_to_phys(sg_page(sg)) | prot;
+ pteval = (sg_phys(sg) - pgoff) | prot;
phys_pfn = pteval >> VTD_PAGE_SHIFT;
}
@@ -3326,7 +3328,7 @@ static int intel_nontranslate_map_sg(str
for_each_sg(sglist, sg, nelems, i) {
BUG_ON(!sg_page(sg));
- sg->dma_address = page_to_phys(sg_page(sg)) + sg->offset;
+ sg->dma_address = sg_phys(sg);
sg->dma_length = sg->length;
}
return nelems;
Patches currently in stable-queue which might be from robin.murphy(a)arm.com are
queue-3.18/iommu-vt-d-fix-scatterlist-offset-handling.patch
This is a note to let you know that I've just added the patch titled
hv: kvp: Avoid reading past allocated blocks from KVP file
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
hv-kvp-avoid-reading-past-allocated-blocks-from-kvp-file.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 297d6b6e56c2977fc504c61bbeeaa21296923f89 Mon Sep 17 00:00:00 2001
From: Paul Meyer <Paul.Meyer(a)microsoft.com>
Date: Tue, 14 Nov 2017 13:06:47 -0700
Subject: hv: kvp: Avoid reading past allocated blocks from KVP file
From: Paul Meyer <Paul.Meyer(a)microsoft.com>
commit 297d6b6e56c2977fc504c61bbeeaa21296923f89 upstream.
While reading in more than one block (50) of KVP records, the allocation
goes per block, but the reads used the total number of allocated records
(without resetting the pointer/stream). This causes the records buffer to
overrun when the refresh reads more than one block over the previous
capacity (e.g. reading more than 100 KVP records whereas the in-memory
database was empty before).
Fix this by reading the correct number of KVP records from file each time.
Signed-off-by: Paul Meyer <Paul.Meyer(a)microsoft.com>
Signed-off-by: Long Li <longli(a)microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys(a)microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
tools/hv/hv_kvp_daemon.c | 70 +++++++++--------------------------------------
1 file changed, 14 insertions(+), 56 deletions(-)
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -196,11 +196,14 @@ static void kvp_update_mem_state(int poo
for (;;) {
readp = &record[records_read];
records_read += fread(readp, sizeof(struct kvp_record),
- ENTRIES_PER_BLOCK * num_blocks,
- filep);
+ ENTRIES_PER_BLOCK * num_blocks - records_read,
+ filep);
if (ferror(filep)) {
- syslog(LOG_ERR, "Failed to read file, pool: %d", pool);
+ syslog(LOG_ERR,
+ "Failed to read file, pool: %d; error: %d %s",
+ pool, errno, strerror(errno));
+ kvp_release_lock(pool);
exit(EXIT_FAILURE);
}
@@ -213,6 +216,7 @@ static void kvp_update_mem_state(int poo
if (record == NULL) {
syslog(LOG_ERR, "malloc failed");
+ kvp_release_lock(pool);
exit(EXIT_FAILURE);
}
continue;
@@ -227,15 +231,11 @@ static void kvp_update_mem_state(int poo
fclose(filep);
kvp_release_lock(pool);
}
+
static int kvp_file_init(void)
{
int fd;
- FILE *filep;
- size_t records_read;
char *fname;
- struct kvp_record *record;
- struct kvp_record *readp;
- int num_blocks;
int i;
int alloc_unit = sizeof(struct kvp_record) * ENTRIES_PER_BLOCK;
@@ -249,61 +249,19 @@ static int kvp_file_init(void)
for (i = 0; i < KVP_POOL_COUNT; i++) {
fname = kvp_file_info[i].fname;
- records_read = 0;
- num_blocks = 1;
sprintf(fname, "%s/.kvp_pool_%d", KVP_CONFIG_LOC, i);
fd = open(fname, O_RDWR | O_CREAT | O_CLOEXEC, 0644 /* rw-r--r-- */);
if (fd == -1)
return 1;
-
- filep = fopen(fname, "re");
- if (!filep) {
- close(fd);
- return 1;
- }
-
- record = malloc(alloc_unit * num_blocks);
- if (record == NULL) {
- fclose(filep);
- close(fd);
- return 1;
- }
- for (;;) {
- readp = &record[records_read];
- records_read += fread(readp, sizeof(struct kvp_record),
- ENTRIES_PER_BLOCK,
- filep);
-
- if (ferror(filep)) {
- syslog(LOG_ERR, "Failed to read file, pool: %d",
- i);
- exit(EXIT_FAILURE);
- }
-
- if (!feof(filep)) {
- /*
- * We have more data to read.
- */
- num_blocks++;
- record = realloc(record, alloc_unit *
- num_blocks);
- if (record == NULL) {
- fclose(filep);
- close(fd);
- return 1;
- }
- continue;
- }
- break;
- }
kvp_file_info[i].fd = fd;
- kvp_file_info[i].num_blocks = num_blocks;
- kvp_file_info[i].records = record;
- kvp_file_info[i].num_records = records_read;
- fclose(filep);
-
+ kvp_file_info[i].num_blocks = 1;
+ kvp_file_info[i].records = malloc(alloc_unit);
+ if (kvp_file_info[i].records == NULL)
+ return 1;
+ kvp_file_info[i].num_records = 0;
+ kvp_update_mem_state(i);
}
return 0;
Patches currently in stable-queue which might be from Paul.Meyer(a)microsoft.com are
queue-3.18/hv-kvp-avoid-reading-past-allocated-blocks-from-kvp-file.patch
This is a note to let you know that I've just added the patch titled
efi: Move some sysfs files to be read-only by root
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
efi-move-some-sysfs-files-to-be-read-only-by-root.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From af97a77bc01ce49a466f9d4c0125479e2e2230b6 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Date: Wed, 6 Dec 2017 09:50:08 +0000
Subject: efi: Move some sysfs files to be read-only by root
From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
commit af97a77bc01ce49a466f9d4c0125479e2e2230b6 upstream.
Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.
So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.
Reported-by: Linus Torvalds <torvalds(a)linux-foundation.org>
Tested-by: Dave Young <dyoung(a)redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org>
Cc: H. Peter Anvin <hpa(a)zytor.com>
Cc: Matt Fleming <matt(a)codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz(a)infradead.org>
Cc: Thomas Gleixner <tglx(a)linutronix.de>
Cc: linux-efi(a)vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo(a)kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
drivers/firmware/efi/efi.c | 3 +--
drivers/firmware/efi/runtime-map.c | 10 +++++-----
include/linux/sysfs.h | 6 ++++++
3 files changed, 12 insertions(+), 7 deletions(-)
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -96,8 +96,7 @@ static ssize_t systab_show(struct kobjec
return str - buf;
}
-static struct kobj_attribute efi_attr_systab =
- __ATTR(systab, 0400, systab_show, NULL);
+static struct kobj_attribute efi_attr_systab = __ATTR_RO_MODE(systab, 0400);
#define EFI_FIELD(var) efi.var
--- a/drivers/firmware/efi/runtime-map.c
+++ b/drivers/firmware/efi/runtime-map.c
@@ -67,11 +67,11 @@ static ssize_t map_attr_show(struct kobj
return map_attr->show(entry, buf);
}
-static struct map_attribute map_type_attr = __ATTR_RO(type);
-static struct map_attribute map_phys_addr_attr = __ATTR_RO(phys_addr);
-static struct map_attribute map_virt_addr_attr = __ATTR_RO(virt_addr);
-static struct map_attribute map_num_pages_attr = __ATTR_RO(num_pages);
-static struct map_attribute map_attribute_attr = __ATTR_RO(attribute);
+static struct map_attribute map_type_attr = __ATTR_RO_MODE(type, 0400);
+static struct map_attribute map_phys_addr_attr = __ATTR_RO_MODE(phys_addr, 0400);
+static struct map_attribute map_virt_addr_attr = __ATTR_RO_MODE(virt_addr, 0400);
+static struct map_attribute map_num_pages_attr = __ATTR_RO_MODE(num_pages, 0400);
+static struct map_attribute map_attribute_attr = __ATTR_RO_MODE(attribute, 0400);
/*
* These are default attributes that are added for every memmap entry.
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -82,6 +82,12 @@ struct attribute_group {
.show = _name##_show, \
}
+#define __ATTR_RO_MODE(_name, _mode) { \
+ .attr = { .name = __stringify(_name), \
+ .mode = VERIFY_OCTAL_PERMISSIONS(_mode) }, \
+ .show = _name##_show, \
+}
+
#define __ATTR_WO(_name) { \
.attr = { .name = __stringify(_name), .mode = S_IWUSR }, \
.store = _name##_store, \
Patches currently in stable-queue which might be from gregkh(a)linuxfoundation.org are
queue-3.18/hv-kvp-avoid-reading-past-allocated-blocks-from-kvp-file.patch
queue-3.18/x.509-reject-invalid-bit-string-for-subjectpublickey.patch
queue-3.18/asn.1-check-for-error-from-asn1_op_end__act-actions.patch
queue-3.18/can-ems_usb-cancel-urb-on-epipe-and-eproto.patch
queue-3.18/alsa-seq-remove-spurious-warn_on-at-timer-check.patch
queue-3.18/keys-add-missing-permission-check-for-request_key-destination.patch
queue-3.18/can-esd_usb2-cancel-urb-on-epipe-and-eproto.patch
queue-3.18/scsi-use-dma_get_cache_alignment-as-minimum-dma-alignment.patch
queue-3.18/iommu-vt-d-fix-scatterlist-offset-handling.patch
queue-3.18/can-usb_8dev-cancel-urb-on-epipe-and-eproto.patch
queue-3.18/alsa-pcm-prevent-uaf-in-snd_pcm_info.patch
queue-3.18/can-kvaser_usb-cancel-urb-on-epipe-and-eproto.patch
queue-3.18/isa-prevent-null-dereference-in-isa_bus-driver-callbacks.patch
queue-3.18/alsa-usb-audio-add-check-return-value-for-usb_string.patch
queue-3.18/scsi-dma-mapping-always-provide-dma_get_cache_alignment.patch
queue-3.18/kdb-fix-handling-of-kallsyms_symbol_next-return-value.patch
queue-3.18/can-kvaser_usb-ratelimit-errors-if-incomplete-messages-are-received.patch
queue-3.18/kvm-vmx-remove-i-o-port-0x80-bypass-on-intel-hosts.patch
queue-3.18/efi-move-some-sysfs-files-to-be-read-only-by-root.patch
queue-3.18/virtio-release-virtio-index-when-fail-to-device_register.patch
queue-3.18/can-kvaser_usb-free-buf-in-error-paths.patch
queue-3.18/media-dvb-i2c-transfers-over-usb-cannot-be-done-from-stack.patch
queue-3.18/arm64-kvm-fix-vttbr_baddr_mask-bug_on-off-by-one.patch
queue-3.18/can-kvaser_usb-fix-comparison-bug-in-kvaser_usb_read_bulk_callback.patch
queue-3.18/arm64-fpsimd-prevent-registers-leaking-from-dead-tasks.patch
queue-3.18/alsa-usb-audio-fix-out-of-bound-error.patch
queue-3.18/x86-pci-make-broadcom_postcore_init-check-acpi_disabled.patch
This is a note to let you know that I've just added the patch titled
ASN.1: check for error from ASN1_OP_END__ACT actions
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
asn.1-check-for-error-from-asn1_op_end__act-actions.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 81a7be2cd69b412ab6aeacfe5ebf1bb6e5bce955 Mon Sep 17 00:00:00 2001
From: Eric Biggers <ebiggers(a)google.com>
Date: Fri, 8 Dec 2017 15:13:27 +0000
Subject: ASN.1: check for error from ASN1_OP_END__ACT actions
From: Eric Biggers <ebiggers(a)google.com>
commit 81a7be2cd69b412ab6aeacfe5ebf1bb6e5bce955 upstream.
asn1_ber_decoder() was ignoring errors from actions associated with the
opcodes ASN1_OP_END_SEQ_ACT, ASN1_OP_END_SET_ACT,
ASN1_OP_END_SEQ_OF_ACT, and ASN1_OP_END_SET_OF_ACT. In practice, this
meant the pkcs7_note_signed_info() action (since that was the only user
of those opcodes). Fix it by checking for the error, just like the
decoder does for actions associated with the other opcodes.
This bug allowed users to leak slab memory by repeatedly trying to add a
specially crafted "pkcs7_test" key (requires CONFIG_PKCS7_TEST_KEY).
In theory, this bug could also be used to bypass module signature
verification, by providing a PKCS#7 message that is misparsed such that
a signature's ->authattrs do not contain its ->msgdigest. But it
doesn't seem practical in normal cases, due to restrictions on the
format of the ->authattrs.
Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers(a)google.com>
Signed-off-by: David Howells <dhowells(a)redhat.com>
Reviewed-by: James Morris <james.l.morris(a)oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
lib/asn1_decoder.c | 2 ++
1 file changed, 2 insertions(+)
--- a/lib/asn1_decoder.c
+++ b/lib/asn1_decoder.c
@@ -422,6 +422,8 @@ next_op:
else
act = machine[pc + 1];
ret = actions[act](context, hdr, 0, data + tdp, len);
+ if (ret < 0)
+ return ret;
}
pc += asn1_op_lengths[op];
goto next_op;
Patches currently in stable-queue which might be from ebiggers(a)google.com are
queue-3.18/x.509-reject-invalid-bit-string-for-subjectpublickey.patch
queue-3.18/asn.1-check-for-error-from-asn1_op_end__act-actions.patch
queue-3.18/keys-add-missing-permission-check-for-request_key-destination.patch
This is a note to let you know that I've just added the patch titled
arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm64-kvm-fix-vttbr_baddr_mask-bug_on-off-by-one.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 26aa7b3b1c0fb3f1a6176a0c1847204ef4355693 Mon Sep 17 00:00:00 2001
From: Kristina Martsenko <kristina.martsenko(a)arm.com>
Date: Thu, 16 Nov 2017 17:58:20 +0000
Subject: arm64: KVM: fix VTTBR_BADDR_MASK BUG_ON off-by-one
From: Kristina Martsenko <kristina.martsenko(a)arm.com>
commit 26aa7b3b1c0fb3f1a6176a0c1847204ef4355693 upstream.
VTTBR_BADDR_MASK is used to sanity check the size and alignment of the
VTTBR address. It seems to currently be off by one, thereby only
allowing up to 47-bit addresses (instead of 48-bit) and also
insufficiently checking the alignment. This patch fixes it.
As an example, with 4k pages, before this patch we have:
PHYS_MASK_SHIFT = 48
VTTBR_X = 37 - 24 = 13
VTTBR_BADDR_SHIFT = 13 - 1 = 12
VTTBR_BADDR_MASK = ((1 << 35) - 1) << 12 = 0x00007ffffffff000
Which is wrong, because the mask doesn't allow bit 47 of the VTTBR
address to be set, and only requires the address to be 12-bit (4k)
aligned, while it actually needs to be 13-bit (8k) aligned because we
concatenate two 4k tables.
With this patch, the mask becomes 0x0000ffffffffe000, which is what we
want.
Fixes: 0369f6a34b9f ("arm64: KVM: EL2 register definitions")
Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall(a)linaro.org>
Signed-off-by: Kristina Martsenko <kristina.martsenko(a)arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier(a)arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall(a)linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm64/include/asm/kvm_arm.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -160,8 +160,7 @@
#define VTTBR_X (37 - VTCR_EL2_T0SZ_40B)
#endif
-#define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
-#define VTTBR_BADDR_MASK (((UL(1) << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
+#define VTTBR_BADDR_MASK (((UL(1) << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_X)
#define VTTBR_VMID_SHIFT (UL(48))
#define VTTBR_VMID_MASK (UL(0xFF) << VTTBR_VMID_SHIFT)
Patches currently in stable-queue which might be from kristina.martsenko(a)arm.com are
queue-3.18/arm64-kvm-fix-vttbr_baddr_mask-bug_on-off-by-one.patch
This is a note to let you know that I've just added the patch titled
arm64: fpsimd: Prevent registers leaking from dead tasks
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
arm64-fpsimd-prevent-registers-leaking-from-dead-tasks.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 071b6d4a5d343046f253a5a8835d477d93992002 Mon Sep 17 00:00:00 2001
From: Dave Martin <Dave.Martin(a)arm.com>
Date: Tue, 5 Dec 2017 14:56:42 +0000
Subject: arm64: fpsimd: Prevent registers leaking from dead tasks
From: Dave Martin <Dave.Martin(a)arm.com>
commit 071b6d4a5d343046f253a5a8835d477d93992002 upstream.
Currently, loading of a task's fpsimd state into the CPU registers
is skipped if that task's state is already present in the registers
of that CPU.
However, the code relies on the struct fpsimd_state * (and by
extension struct task_struct *) to unambiguously identify a task.
There is a particular case in which this doesn't work reliably:
when a task exits, its task_struct may be recycled to describe a
new task.
Consider the following scenario:
1) Task P loads its fpsimd state onto cpu C.
per_cpu(fpsimd_last_state, C) := P;
P->thread.fpsimd_state.cpu := C;
2) Task X is scheduled onto C and loads its fpsimd state on C.
per_cpu(fpsimd_last_state, C) := X;
X->thread.fpsimd_state.cpu := C;
3) X exits, causing X's task_struct to be freed.
4) P forks a new child T, which obtains X's recycled task_struct.
T == X.
T->thread.fpsimd_state.cpu == C (inherited from P).
5) T is scheduled on C.
T's fpsimd state is not loaded, because
per_cpu(fpsimd_last_state, C) == T (== X) &&
T->thread.fpsimd_state.cpu == C.
(This is the check performed by fpsimd_thread_switch().)
So, T gets X's registers because the last registers loaded onto C
were those of X, in (2).
This patch fixes the problem by ensuring that the sched-in check
fails in (5): fpsimd_flush_task_state(T) is called when T is
forked, so that T->thread.fpsimd_state.cpu == C cannot be true.
This relies on the fact that T is not schedulable until after
copy_thread() completes.
Once T's fpsimd state has been loaded on some CPU C there may still
be other cpus D for which per_cpu(fpsimd_last_state, D) ==
&X->thread.fpsimd_state. But D is necessarily != C in this case,
and the check in (5) must fail.
An alternative fix would be to do refcounting on task_struct. This
would result in each CPU holding a reference to the last task whose
fpsimd state was loaded there. It's not clear whether this is
preferable, and it involves higher overhead than the fix proposed
in this patch. It would also move all the task_struct freeing
work into the context switch critical section, or otherwise some
deferred cleanup mechanism would need to be introduced, neither of
which seems obviously justified.
Fixes: 005f78cd8849 ("arm64: defer reloading a task's FPSIMD state to userland resume")
Signed-off-by: Dave Martin <Dave.Martin(a)arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org>
[will: word-smithed the comment so it makes more sense]
Signed-off-by: Will Deacon <will.deacon(a)arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
arch/arm64/kernel/process.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -250,6 +250,15 @@ int copy_thread(unsigned long clone_flag
memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
+ /*
+ * In case p was allocated the same task_struct pointer as some
+ * other recently-exited task, make sure p is disassociated from
+ * any cpu that may have run that now-exited task recently.
+ * Otherwise we could erroneously skip reloading the FPSIMD
+ * registers for p.
+ */
+ fpsimd_flush_task_state(p);
+
if (likely(!(p->flags & PF_KTHREAD))) {
*childregs = *current_pt_regs();
childregs->regs[0] = 0;
Patches currently in stable-queue which might be from Dave.Martin(a)arm.com are
queue-3.18/arm64-fpsimd-prevent-registers-leaking-from-dead-tasks.patch
This is a note to let you know that I've just added the patch titled
ALSA: usb-audio: Fix out-of-bound error
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
alsa-usb-audio-fix-out-of-bound-error.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 251552a2b0d454badc8f486e6d79100970c744b0 Mon Sep 17 00:00:00 2001
From: Jaejoong Kim <climbbb.kim(a)gmail.com>
Date: Mon, 4 Dec 2017 15:31:48 +0900
Subject: ALSA: usb-audio: Fix out-of-bound error
From: Jaejoong Kim <climbbb.kim(a)gmail.com>
commit 251552a2b0d454badc8f486e6d79100970c744b0 upstream.
The snd_usb_copy_string_desc() retrieves the usb string corresponding to
the index number through the usb_string(). The problem is that the
usb_string() returns the length of the string (>= 0) when successful, but
it can also return a negative value about the error case or status of
usb_control_msg().
If iClockSource is '0' as shown below, usb_string() will returns -EINVAL.
This will result in '0' being inserted into buf[-22], and the following
KASAN out-of-bound error message will be output.
AudioControl Interface Descriptor:
bLength 8
bDescriptorType 36
bDescriptorSubtype 10 (CLOCK_SOURCE)
bClockID 1
bmAttributes 0x07 Internal programmable Clock (synced to SOF)
bmControls 0x07
Clock Frequency Control (read/write)
Clock Validity Control (read-only)
bAssocTerminal 0
iClockSource 0
To fix it, check usb_string()'return value and bail out.
==================================================================
BUG: KASAN: stack-out-of-bounds in parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
Write of size 1 at addr ffff88007e66735a by task systemd-udevd/18376
CPU: 0 PID: 18376 Comm: systemd-udevd Not tainted 4.13.0+ #3
Hardware name: LG Electronics 15N540-RFLGL/White Tip Mountain, BIOS 15N5
Call Trace:
dump_stack+0x63/0x8d
print_address_description+0x70/0x290
? parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
kasan_report+0x265/0x350
__asan_store1+0x4a/0x50
parse_audio_unit+0x1327/0x1960 [snd_usb_audio]
? save_stack+0xb5/0xd0
? save_stack_trace+0x1b/0x20
? save_stack+0x46/0xd0
? kasan_kmalloc+0xad/0xe0
? kmem_cache_alloc_trace+0xff/0x230
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? usb_probe_interface+0x1f5/0x440
? driver_probe_device+0x3ed/0x660
? build_feature_ctl+0xb10/0xb10 [snd_usb_audio]
? save_stack_trace+0x1b/0x20
? init_object+0x69/0xa0
? snd_usb_find_csint_desc+0xa8/0xf0 [snd_usb_audio]
snd_usb_mixer_controls+0x1dc/0x370 [snd_usb_audio]
? build_audio_procunit+0x890/0x890 [snd_usb_audio]
? snd_usb_create_mixer+0xb0/0x4b0 [snd_usb_audio]
? kmem_cache_alloc_trace+0xff/0x230
? usb_ifnum_to_if+0xbd/0xf0
snd_usb_create_mixer+0x25b/0x4b0 [snd_usb_audio]
? snd_usb_create_stream+0x255/0x2c0 [snd_usb_audio]
usb_audio_probe+0x4de/0xf40 [snd_usb_audio]
? snd_usb_autosuspend.part.7+0x30/0x30 [snd_usb_audio]
? __pm_runtime_idle+0x90/0x90
? kernfs_activate+0xa6/0xc0
? usb_match_one_id_intf+0xdc/0x130
? __pm_runtime_set_status+0x2d4/0x450
usb_probe_interface+0x1f5/0x440
Signed-off-by: Jaejoong Kim <climbbb.kim(a)gmail.com>
Signed-off-by: Takashi Iwai <tiwai(a)suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
sound/usb/mixer.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -199,6 +199,10 @@ static int snd_usb_copy_string_desc(stru
int index, char *buf, int maxlen)
{
int len = usb_string(state->chip->dev, index, buf, maxlen - 1);
+
+ if (len < 0)
+ return 0;
+
buf[len] = 0;
return len;
}
Patches currently in stable-queue which might be from climbbb.kim(a)gmail.com are
queue-3.18/alsa-usb-audio-add-check-return-value-for-usb_string.patch
queue-3.18/alsa-usb-audio-fix-out-of-bound-error.patch
This is a note to let you know that I've just added the patch titled
ALSA: usb-audio: Add check return value for usb_string()
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
alsa-usb-audio-add-check-return-value-for-usb_string.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 89b89d121ffcf8d9546633b98ded9d18b8f75891 Mon Sep 17 00:00:00 2001
From: Jaejoong Kim <climbbb.kim(a)gmail.com>
Date: Mon, 4 Dec 2017 15:31:49 +0900
Subject: ALSA: usb-audio: Add check return value for usb_string()
From: Jaejoong Kim <climbbb.kim(a)gmail.com>
commit 89b89d121ffcf8d9546633b98ded9d18b8f75891 upstream.
snd_usb_copy_string_desc() returns zero if usb_string() fails.
In case of failure, we need to check the snd_usb_copy_string_desc()'s
return value and add an exception case
Signed-off-by: Jaejoong Kim <climbbb.kim(a)gmail.com>
Signed-off-by: Takashi Iwai <tiwai(a)suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
sound/usb/mixer.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2099,13 +2099,14 @@ static int parse_audio_selector_unit(str
if (len)
;
else if (nameid)
- snd_usb_copy_string_desc(state, nameid, kctl->id.name,
+ len = snd_usb_copy_string_desc(state, nameid, kctl->id.name,
sizeof(kctl->id.name));
- else {
+ else
len = get_term_name(state, &state->oterm,
kctl->id.name, sizeof(kctl->id.name), 0);
- if (!len)
- strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
+
+ if (!len) {
+ strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
append_ctl_name(kctl, " Clock Source");
Patches currently in stable-queue which might be from climbbb.kim(a)gmail.com are
queue-3.18/alsa-usb-audio-add-check-return-value-for-usb_string.patch
queue-3.18/alsa-usb-audio-fix-out-of-bound-error.patch
This is a note to let you know that I've just added the patch titled
ALSA: seq: Remove spurious WARN_ON() at timer check
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
alsa-seq-remove-spurious-warn_on-at-timer-check.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 43a3542870328601be02fcc9d27b09db467336ef Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai(a)suse.de>
Date: Thu, 30 Nov 2017 10:08:28 +0100
Subject: ALSA: seq: Remove spurious WARN_ON() at timer check
From: Takashi Iwai <tiwai(a)suse.de>
commit 43a3542870328601be02fcc9d27b09db467336ef upstream.
The use of snd_BUG_ON() in ALSA sequencer timer may lead to a spurious
WARN_ON() when a slave timer is deployed as its backend and a
corresponding master timer stops meanwhile. The symptom was triggered
by syzkaller spontaneously.
Since the NULL timer is valid there, rip off snd_BUG_ON().
Reported-by: syzbot <syzkaller(a)googlegroups.com>
Signed-off-by: Takashi Iwai <tiwai(a)suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
sound/core/seq/seq_timer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/core/seq/seq_timer.c
+++ b/sound/core/seq/seq_timer.c
@@ -355,7 +355,7 @@ static int initialize_timer(struct snd_s
unsigned long freq;
t = tmr->timeri->timer;
- if (snd_BUG_ON(!t))
+ if (!t)
return -EINVAL;
freq = tmr->preferred_resolution;
Patches currently in stable-queue which might be from tiwai(a)suse.de are
queue-3.18/alsa-seq-remove-spurious-warn_on-at-timer-check.patch
queue-3.18/alsa-pcm-prevent-uaf-in-snd_pcm_info.patch
queue-3.18/alsa-usb-audio-add-check-return-value-for-usb_string.patch
queue-3.18/alsa-usb-audio-fix-out-of-bound-error.patch
This is a note to let you know that I've just added the patch titled
ALSA: pcm: prevent UAF in snd_pcm_info
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum…
The filename of the patch is:
alsa-pcm-prevent-uaf-in-snd_pcm_info.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable(a)vger.kernel.org> know about it.
>From 362bca57f5d78220f8b5907b875961af9436e229 Mon Sep 17 00:00:00 2001
From: Robb Glasser <rglasser(a)google.com>
Date: Tue, 5 Dec 2017 09:16:55 -0800
Subject: ALSA: pcm: prevent UAF in snd_pcm_info
From: Robb Glasser <rglasser(a)google.com>
commit 362bca57f5d78220f8b5907b875961af9436e229 upstream.
When the device descriptor is closed, the `substream->runtime` pointer
is freed. But another thread may be in the ioctl handler, case
SNDRV_CTL_IOCTL_PCM_INFO. This case calls snd_pcm_info_user() which
calls snd_pcm_info() which accesses the now freed `substream->runtime`.
Note: this fixes CVE-2017-0861
Signed-off-by: Robb Glasser <rglasser(a)google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers(a)google.com>
Signed-off-by: Takashi Iwai <tiwai(a)suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
---
sound/core/pcm.c | 2 ++
1 file changed, 2 insertions(+)
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -150,7 +150,9 @@ static int snd_pcm_control_ioctl(struct
err = -ENXIO;
goto _error;
}
+ mutex_lock(&pcm->open_mutex);
err = snd_pcm_info_user(substream, info);
+ mutex_unlock(&pcm->open_mutex);
_error:
mutex_unlock(®ister_mutex);
return err;
Patches currently in stable-queue which might be from rglasser(a)google.com are
queue-3.18/alsa-pcm-prevent-uaf-in-snd_pcm_info.patch