- Linux-stable-mirror - lists.linaro.org

[RFC v2] ALSA: hda: Add a power_save blacklist

by Hans de Goede

On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible. This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices. Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128 But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops. The blacklist only applies to the default power_save module-option value, if an user explicitly sets the module-option then the blacklist is not used. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611 Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- Changes in RFC v2: -Only use the blacklist if the power_save module-option is not explicitly set by the user --- sound/pci/hda/hda_intel.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c71dcacea807..7c588b0d6c96 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -181,7 +181,7 @@ static const struct kernel_param_ops param_ops_xint = { }; #define param_check_xint param_check_int -static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; +static int power_save = -1; module_param(power_save, xint, 0644); MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " "(in second, 0 = disable)."); @@ -2186,6 +2186,22 @@ static int azx_probe(struct pci_dev *pci, return err; } +/* On some boards setting power_save to a non 0 value leads to clicking / + * popping sounds when ever we enter/leave powersaving mode. Ideally we would + * figure out how to avoid these sounds, but that is not always feasible. + * So we keep a list of devices where we disable powersaving as its known + * to causes problems on these devices. + */ +static struct snd_pci_quirk power_save_blacklist[] = { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0), + /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */ + SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + {} +}; + /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = { [AZX_DRIVER_NVIDIA] = 8, @@ -2197,6 +2213,7 @@ static int azx_probe_continue(struct azx *chip) struct hda_intel *hda = container_of(chip, struct hda_intel, chip); struct hdac_bus *bus = azx_bus(chip); struct pci_dev *pci = chip->pci; + const struct snd_pci_quirk *q; int dev = chip->dev_index; int err; @@ -2278,6 +2295,16 @@ static int azx_probe_continue(struct azx *chip) chip->running = 1; azx_add_card_list(chip); + + if (power_save == -1) { + power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && power_save) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + power_save = 0; + } + } snd_hda_set_power_save(&chip->bus, power_save * 1000); if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo) pm_runtime_put_autosuspend(&pci->dev); -- 2.14.3

7 years, 4 months

2
1
0 0

patch "mei: me: add cannon point device ids" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mei: me: add cannon point device ids to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From f8f4aa68a8ae98ed79c8fee3488c38a2f5d2de8c Mon Sep 17 00:00:00 2001 From: Alexander Usyskin <alexander.usyskin(a)intel.com> Date: Sun, 18 Feb 2018 11:05:15 +0200 Subject: mei: me: add cannon point device ids Add CNP LP and CNP H device ids for cannon lake and coffee lake platforms. Cc: <stable(a)vger.kernel.org> 4.14+ Signed-off-by: Alexander Usyskin <alexander.usyskin(a)intel.com> Signed-off-by: Tomas Winkler <tomas.winkler(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/misc/mei/hw-me-regs.h | 3 +++ drivers/misc/mei/pci-me.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index 0ccccbaf530d..bda3bd8f3141 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -132,6 +132,9 @@ #define MEI_DEV_ID_KBP 0xA2BA /* Kaby Point */ #define MEI_DEV_ID_KBP_2 0xA2BB /* Kaby Point 2 */ +#define MEI_DEV_ID_CNP_LP 0x9DE0 /* Cannon Point LP */ +#define MEI_DEV_ID_CNP_H 0xA360 /* Cannon Point H */ + /* * MEI HW Section */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 4a0ccda4d04b..f915000e5bf9 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -98,6 +98,9 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)}, + /* required last entry */ {0, } }; -- 2.16.2

7 years, 4 months

1
0
0 0

patch "mei: me: add cannon point device ids for 4th device" added to char-misc-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mei: me: add cannon point device ids for 4th device to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 2a4ac172c2f257d28c47b90c9e381bec31edcc44 Mon Sep 17 00:00:00 2001 From: Tomas Winkler <tomas.winkler(a)intel.com> Date: Sun, 18 Feb 2018 11:05:16 +0200 Subject: mei: me: add cannon point device ids for 4th device Add cannon point device ids for 4th (itouch) device. Cc: <stable(a)vger.kernel.org> 4.14+ Signed-off-by: Tomas Winkler <tomas.winkler(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/misc/mei/hw-me-regs.h | 2 ++ drivers/misc/mei/pci-me.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index bda3bd8f3141..e4b10b2d1a08 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -133,7 +133,9 @@ #define MEI_DEV_ID_KBP_2 0xA2BB /* Kaby Point 2 */ #define MEI_DEV_ID_CNP_LP 0x9DE0 /* Cannon Point LP */ +#define MEI_DEV_ID_CNP_LP_4 0x9DE4 /* Cannon Point LP 4 (iTouch) */ #define MEI_DEV_ID_CNP_H 0xA360 /* Cannon Point H */ +#define MEI_DEV_ID_CNP_H_4 0xA364 /* Cannon Point H 4 (iTouch) */ /* * MEI HW Section diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index f915000e5bf9..ea4e152270a3 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -99,7 +99,9 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_4, MEI_ME_PCH8_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)}, /* required last entry */ {0, } -- 2.16.2

7 years, 4 months

1
0
0 0

FAILED: patch "[PATCH] PCI: keystone: Fix interrupt-controller-node lookup" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From eac56aa3bc8af3d9b9850345d0f2da9d83529134 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Fri, 17 Nov 2017 14:38:31 +0100 Subject: [PATCH] PCI: keystone: Fix interrupt-controller-node lookup Fix child-node lookup during initialisation which was using the wrong OF-helper and ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pci node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Any matching child interrupt-controller node was also leaked. Fixes: 0c4ffcfe1fbc ("PCI: keystone: Add TI Keystone PCIe driver") Cc: stable <stable(a)vger.kernel.org> # 3.18 Acked-by: Murali Karicheri <m-karicheri2(a)ti.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> [lorenzo.pieralisi(a)arm.com: updated commit subject] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi(a)arm.com> diff --git a/drivers/pci/dwc/pci-keystone.c b/drivers/pci/dwc/pci-keystone.c index 5bee3af47588..39405598b22d 100644 --- a/drivers/pci/dwc/pci-keystone.c +++ b/drivers/pci/dwc/pci-keystone.c @@ -178,7 +178,7 @@ static int ks_pcie_get_irq_controller_info(struct keystone_pcie *ks_pcie, } /* interrupt controller is in a child node */ - *np_temp = of_find_node_by_name(np_pcie, controller); + *np_temp = of_get_child_by_name(np_pcie, controller); if (!(*np_temp)) { dev_err(dev, "Node for %s is absent\n", controller); return -EINVAL; @@ -187,6 +187,7 @@ static int ks_pcie_get_irq_controller_info(struct keystone_pcie *ks_pcie, temp = of_irq_count(*np_temp); if (!temp) { dev_err(dev, "No IRQ entries in %s\n", controller); + of_node_put(*np_temp); return -EINVAL; } @@ -204,6 +205,8 @@ static int ks_pcie_get_irq_controller_info(struct keystone_pcie *ks_pcie, break; } + of_node_put(*np_temp); + if (temp) { *num_irqs = temp; return 0;

7 years, 4 months

2
1
0 0

Re: [PATCH 4.9 34/77] powerpc: fix build errors in stable tree

by Greg Kroah-Hartman

On Thu, Feb 22, 2018 at 10:33:50AM +0100, Yves-Alexis Perez wrote: > On Thu, 2018-02-22 at 12:01 +1100, Michael Ellerman wrote: > > So I guess this patch is OK for now, but we do need a full back port of > > 222f20f to 4.9. > > Hi, > > in the light of this, do you know the full status of protections against > Meltdown on powerpc/ppc64el architecures on 4.9? Did you look at /sys/devices/system/cpu/vulnerabilities/ to see what the files there say? thanks, greg k-h

7 years, 4 months

1
0
0 0

[RFC] ALSA: hda: Add a power_save blacklist

by Hans de Goede

On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible. This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices. Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128 But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops. I've chosen to also apply the blacklist to changes made through /sys/module/snd_hda_intel/parameters/power_save, since tools such as powertop and TLP do this automatically. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1533858 Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- About the choice to also apply this to changes made through /sys/module/snd_hda_intel/parameters/power_save, one could argue that this will get in the way of users who want the power-saving anyways and are willing to live with the clicks/plops. An alternative approach would be to only apply this to the value of the module-parameter at boot and then only when it matches CONFIG_SND_HDA_POWER_SAVE_DEFAULT. I'm open to changing this for v2. --- sound/pci/hda/hda_intel.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c71dcacea807..ea612aeb1663 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -936,6 +936,34 @@ static unsigned int azx_get_pos_skl(struct azx *chip, struct azx_dev *azx_dev) return azx_get_pos_posbuf(chip, azx_dev); } +/* On some boards setting power_save to a non 0 value leads to clicking / + * popping sounds when ever we enter/leave powersaving mode. Ideally we would + * figure out how to avoid these sounds, but that is not always feasible. + * So we keep a list of devices where we disable powersaving as its known to + * causes problems on these devices. + */ +static struct snd_pci_quirk power_save_blacklist[] = { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1533858 */ + SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + {} +}; + +static void check_power_save_blacklist(struct azx *chip) +{ + const struct snd_pci_quirk *q; + + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && power_save) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + power_save = 0; + } +} + #ifdef CONFIG_PM static DEFINE_MUTEX(card_list_lock); static LIST_HEAD(card_list); @@ -972,6 +1000,7 @@ static int param_set_xint(const char *val, const struct kernel_param *kp) chip = &hda->chip; if (!hda->probe_continued || chip->disabled) continue; + check_power_save_blacklist(chip); snd_hda_set_power_save(&chip->bus, power_save * 1000); } mutex_unlock(&card_list_lock); @@ -2278,6 +2307,7 @@ static int azx_probe_continue(struct azx *chip) chip->running = 1; azx_add_card_list(chip); + check_power_save_blacklist(chip); snd_hda_set_power_save(&chip->bus, power_save * 1000); if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo) pm_runtime_put_autosuspend(&pci->dev); -- 2.14.3

7 years, 4 months

1
0
0 0

[PATCH 4.14, 4.9] crypto: talitos - fix Kernel Oops on hashing an empty file

by Christophe Leroy

Upstream 87a81dce53b1ea61acaeefa5191a0376a2d1d721 Performing the hash of an empty file leads to a kernel Oops [ 44.504600] Unable to handle kernel paging request for data at address 0x0000000c [ 44.512819] Faulting instruction address: 0xc02d2be8 [ 44.524088] Oops: Kernel access of bad area, sig: 11 [#1] [ 44.529171] BE PREEMPT CMPC885 [ 44.532232] CPU: 0 PID: 491 Comm: md5sum Not tainted 4.15.0-rc8-00211-g3a968610b6ea #81 [ 44.540814] NIP: c02d2be8 LR: c02d2984 CTR: 00000000 [ 44.545812] REGS: c6813c90 TRAP: 0300 Not tainted (4.15.0-rc8-00211-g3a968610b6ea) [ 44.554223] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48222822 XER: 20000000 [ 44.560855] DAR: 0000000c DSISR: c0000000 [ 44.560855] GPR00: c02d28fc c6813d40 c6828000 c646fa40 00000001 00000001 00000001 00000000 [ 44.560855] GPR08: 0000004c 00000000 c000bfcc 00000000 28222822 100280d4 00000000 10020008 [ 44.560855] GPR16: 00000000 00000020 00000000 00000000 10024008 00000000 c646f9f0 c6179a10 [ 44.560855] GPR24: 00000000 00000001 c62f0018 c6179a10 00000000 c6367a30 c62f0000 c646f9c0 [ 44.598542] NIP [c02d2be8] ahash_process_req+0x448/0x700 [ 44.603751] LR [c02d2984] ahash_process_req+0x1e4/0x700 [ 44.608868] Call Trace: [ 44.611329] [c6813d40] [c02d28fc] ahash_process_req+0x15c/0x700 (unreliable) [ 44.618302] [c6813d90] [c02060c4] hash_recvmsg+0x11c/0x210 [ 44.623716] [c6813db0] [c0331354] ___sys_recvmsg+0x98/0x138 [ 44.629226] [c6813eb0] [c03332c0] __sys_recvmsg+0x40/0x84 [ 44.634562] [c6813f10] [c03336c0] SyS_socketcall+0xb8/0x1d4 [ 44.640073] [c6813f40] [c000d1ac] ret_from_syscall+0x0/0x38 [ 44.645530] Instruction dump: [ 44.648465] 38c00001 7f63db78 4e800421 7c791b78 54690ffe 0f090000 80ff0190 2f870000 [ 44.656122] 40befe50 2f990001 409e0210 813f01bc <8129000c> b39e003a 7d29c214 913e003c This patch fixes that Oops by checking if src is NULL. Fixes: 6a1e8d14156d4 ("crypto: talitos - making mapping helpers more generic") Cc: <stable(a)vger.kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy(a)c-s.fr> --- drivers/crypto/talitos.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index dff88838dce7..42913116620a 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -1124,6 +1124,11 @@ int talitos_sg_map(struct device *dev, struct scatterlist *src, struct talitos_private *priv = dev_get_drvdata(dev); bool is_sec1 = has_ftr_sec1(priv); + if (!src) { + *ptr = zero_entry; + return 1; + } + to_talitos_ptr_len(ptr, len, is_sec1); to_talitos_ptr_ext_set(ptr, 0, is_sec1); -- 2.13.3

7 years, 4 months

3
2
0 0

Re: [PATCH 4.10 070/111] audit: fix auditd/kernel connection state tracking

by Peter Zijlstra

On Tue, Mar 28, 2017 at 02:30:56PM +0200, Greg Kroah-Hartman wrote: > 4.10-stable review patch. If anyone has any objections, please let me know. > + if (!(auditd_test_task(current) || > + (current == __mutex_owner(&audit_cmd_mutex)))) { > + long stime = audit_backlog_wait_time; Since I cannot find the original email on lkml, NAK on this. __mutex_owner() is not a general purpose helper function.

7 years, 4 months

3
8
0 0

[patch 16/16] mm: don't defer struct page initialization for Xen pv guests

by akpm＠linux-foundation.org

From: Juergen Gross <jgross(a)suse.com> Subject: mm: don't defer struct page initialization for Xen pv guests f7f99100d8d95d ("mm: stop zeroing memory during allocation in vmemmap") broke Xen pv domains in some configurations, as the "Pinned" information in struct page of early page tables could get lost. This will lead to the kernel trying to write directly into the page tables instead of asking the hypervisor to do so. The result is a crash like the following: [ 0.004000] BUG: unable to handle kernel paging request at ffff8801ead19008 [ 0.004000] IP: xen_set_pud+0x4e/0xd0 [ 0.004000] PGD 1c0a067 P4D 1c0a067 PUD 23a0067 PMD 1e9de0067 PTE 80100001ead19065 [ 0.004000] Oops: 0003 [#1] PREEMPT SMP [ 0.004000] Modules linked in: [ 0.004000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.0-default+ #271 [ 0.004000] Hardware name: Dell Inc. Latitude E6440/0159N7, BIOS A07 06/26/2014 [ 0.004000] task: ffffffff81c10480 task.stack: ffffffff81c00000 [ 0.004000] RIP: e030:xen_set_pud+0x4e/0xd0 [ 0.004000] RSP: e02b:ffffffff81c03cd8 EFLAGS: 00010246 [ 0.004000] RAX: 002ffff800000800 RBX: ffff88020fd31000 RCX: 0000000000000000 [ 0.004000] RDX: ffffea0000000000 RSI: 00000001b8308067 RDI: ffff8801ead19008 [ 0.004000] RBP: ffff8801ead19008 R08: aaaaaaaaaaaaaaaa R09: 00000000063f4c80 [ 0.004000] R10: aaaaaaaaaaaaaaaa R11: 0720072007200720 R12: 00000001b8308067 [ 0.004000] R13: ffffffff81c8a9cc R14: ffff88018fd31000 R15: 000077ff80000000 [ 0.004000] FS: 0000000000000000(0000) GS:ffff88020f600000(0000) knlGS:0000000000000000 [ 0.004000] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.004000] CR2: ffff8801ead19008 CR3: 0000000001c09000 CR4: 0000000000042660 [ 0.004000] Call Trace: [ 0.004000] __pmd_alloc+0x128/0x140 [ 0.004000] ? acpi_os_map_iomem+0x175/0x1b0 [ 0.004000] ioremap_page_range+0x3f4/0x410 [ 0.004000] ? acpi_os_map_iomem+0x175/0x1b0 [ 0.004000] __ioremap_caller+0x1c3/0x2e0 [ 0.004000] acpi_os_map_iomem+0x175/0x1b0 [ 0.004000] acpi_tb_acquire_table+0x39/0x66 [ 0.004000] acpi_tb_validate_table+0x44/0x7c [ 0.004000] acpi_tb_verify_temp_table+0x45/0x304 [ 0.004000] ? acpi_ut_acquire_mutex+0x12a/0x1c2 [ 0.004000] acpi_reallocate_root_table+0x12d/0x141 [ 0.004000] acpi_early_init+0x4d/0x10a [ 0.004000] start_kernel+0x3eb/0x4a1 [ 0.004000] ? set_init_arg+0x55/0x55 [ 0.004000] xen_start_kernel+0x528/0x532 [ 0.004000] Code: 48 01 e8 48 0f 42 15 a2 fd be 00 48 01 d0 48 ba 00 00 00 00 00 ea ff ff 48 c1 e8 0c 48 c1 e0 06 48 01 d0 48 8b 00 f6 c4 02 75 5d <4c> 89 65 00 5b 5d 41 5c c3 65 8b 05 52 9f fe 7e 89 c0 48 0f a3 [ 0.004000] RIP: xen_set_pud+0x4e/0xd0 RSP: ffffffff81c03cd8 [ 0.004000] CR2: ffff8801ead19008 [ 0.004000] ---[ end trace 38eca2e56f1b642e ]--- Avoid this problem by not deferring struct page initialization when running as Xen pv guest. Pavel said: : This is unique for Xen, so this particular issue won't effect other : configurations. I am going to investigate if there is a way to : re-enable deferred page initialization on xen guests. [akpm(a)linux-foundation.org: explicitly include xen.h] Link: http://lkml.kernel.org/r/20180216154101.22865-1-jgross@suse.com Fixes: f7f99100d8d95d ("mm: stop zeroing memory during allocation in vmemmap") Signed-off-by: Juergen Gross <jgross(a)suse.com> Reviewed-by: Pavel Tatashin <pasha.tatashin(a)oracle.com> Cc: Steven Sistare <steven.sistare(a)oracle.com> Cc: Daniel Jordan <daniel.m.jordan(a)oracle.com> Cc: Bob Picco <bob.picco(a)oracle.com> Cc: <stable(a)vger.kernel.org> [4.15.x] Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/page_alloc.c | 4 ++++ 1 file changed, 4 insertions(+) diff -puN mm/page_alloc.c~mm-dont-defer-struct-page-initialization-for-xen-pv-guests mm/page_alloc.c --- a/mm/page_alloc.c~mm-dont-defer-struct-page-initialization-for-xen-pv-guests +++ a/mm/page_alloc.c @@ -46,6 +46,7 @@ #include <linux/stop_machine.h> #include <linux/sort.h> #include <linux/pfn.h> +#include <xen/xen.h> #include <linux/backing-dev.h> #include <linux/fault-inject.h> #include <linux/page-isolation.h> @@ -347,6 +348,9 @@ static inline bool update_defer_init(pg_ /* Always populate low zones for address-constrained allocations */ if (zone_end < pgdat_end_pfn(pgdat)) return true; + /* Xen PV domains need page structures early */ + if (xen_pv_domain()) + return true; (*nr_initialised)++; if ((*nr_initialised > pgdat->static_init_pgcnt) && (pfn & (PAGES_PER_SECTION - 1)) == 0) { _

7 years, 4 months

1
0
0 0

[patch 14/16] vmalloc: fix __GFP_HIGHMEM usage for vmalloc_32 on 32b systems

by akpm＠linux-foundation.org

From: Michal Hocko <mhocko(a)suse.com> Subject: vmalloc: fix __GFP_HIGHMEM usage for vmalloc_32 on 32b systems Kai Heng Feng has noticed that BUG_ON(PageHighMem(pg)) triggers in drivers/media/common/saa7146/saa7146_core.c since 19809c2da28a ("mm, vmalloc: use __GFP_HIGHMEM implicitly"). saa7146_vmalloc_build_pgtable uses vmalloc_32 and it is reasonable to expect that the resulting page is not in highmem. The above commit aimed to add __GFP_HIGHMEM only for those requests which do not specify any zone modifier gfp flag. vmalloc_32 relies on GFP_VMALLOC32 which should do the right thing. Except it has been missed that GFP_VMALLOC32 is an alias for GFP_KERNEL on 32b architectures. Thanks to Matthew to notice this. Fix the problem by unconditionally setting GFP_DMA32 in GFP_VMALLOC32 for !64b arches (as a bailout). This should do the right thing and use ZONE_NORMAL which should be always below 4G on 32b systems. Debugged by Matthew Wilcox. [akpm(a)linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20180212095019.GX21609@dhcp22.suse.cz Fixes: 19809c2da28a ("mm, vmalloc: use __GFP_HIGHMEM implicitly”) Signed-off-by: Michal Hocko <mhocko(a)suse.com> Reported-by: Kai Heng Feng <kai.heng.feng(a)canonical.com> Cc: Matthew Wilcox <willy(a)infradead.org> Cc: Laura Abbott <labbott(a)redhat.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/vmalloc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff -puN mm/vmalloc.c~vmalloc-fix-__gfp_highmem-usage-for-vmalloc_32-on-32b-systems mm/vmalloc.c --- a/mm/vmalloc.c~vmalloc-fix-__gfp_highmem-usage-for-vmalloc_32-on-32b-systems +++ a/mm/vmalloc.c @@ -1943,11 +1943,15 @@ void *vmalloc_exec(unsigned long size) } #if defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA32) -#define GFP_VMALLOC32 GFP_DMA32 | GFP_KERNEL +#define GFP_VMALLOC32 (GFP_DMA32 | GFP_KERNEL) #elif defined(CONFIG_64BIT) && defined(CONFIG_ZONE_DMA) -#define GFP_VMALLOC32 GFP_DMA | GFP_KERNEL +#define GFP_VMALLOC32 (GFP_DMA | GFP_KERNEL) #else -#define GFP_VMALLOC32 GFP_KERNEL +/* + * 64b systems should always have either DMA or DMA32 zones. For others + * GFP_DMA32 should do the right thing and use the normal zone. + */ +#define GFP_VMALLOC32 GFP_DMA32 | GFP_KERNEL #endif /** _

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror