- Linux-stable-mirror - lists.linaro.org

Patch "sdhci: Advertise 2.0v supply on SDIO host controller" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sdhci: Advertise 2.0v supply on SDIO host controller to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Date: Thu, 11 Jan 2018 15:51:58 +0200 Subject: sdhci: Advertise 2.0v supply on SDIO host controller From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> [ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ] On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO, requires 2.0v, while the host, according to Intel Merrifield TRM, supports 1.8v supply only. The card announces itself as mmc2: new ultra high speed DDR50 SDIO card at address 0001 Introduce a custom OCR mask for SDIO host controller on Intel Merrifield and add a special case to sdhci_set_power_noreg() to override 2.0v supply by enforcing 1.8v power choice. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/host/sdhci-pci-core.c | 2 ++ drivers/mmc/host/sdhci.c | 7 +++++++ 2 files changed, 9 insertions(+) --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -806,6 +806,8 @@ static int intel_mrfld_mmc_probe_slot(st slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; break; case INTEL_MRFLD_SDIO: + /* Advertise 2.0v for compatibility with the SDIO card's OCR */ + slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195; slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD; break; --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1470,6 +1470,13 @@ void sdhci_set_power_noreg(struct sdhci_ if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: + /* + * Without a regulator, SDHCI does not support 2.0v + * so we only get here if the driver deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v + * for the purpose of turning on the power. + */ + case MMC_VDD_20_21: pwr = SDHCI_POWER_180; break; case MMC_VDD_29_30: Patches currently in stable-queue which might be from andriy.shevchenko(a)linux.intel.com are queue-4.14/sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch

7 years, 7 months

1
0
0 0

Patch "selftests/net: fix bugs in address and port initialization" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selftests/net: fix bugs in address and port initialization to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selftests-net-fix-bugs-in-address-and-port-initialization.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Sowmini Varadhan <sowmini.varadhan(a)oracle.com> Date: Mon, 25 Dec 2017 14:43:04 -0800 Subject: selftests/net: fix bugs in address and port initialization From: Sowmini Varadhan <sowmini.varadhan(a)oracle.com> [ Upstream commit d36f45e5b46723cf2d4147173e18c52d4143176d ] Address/port initialization should work correctly regardless of the order in which command line arguments are supplied, E.g, cfg_port should be used to connect to the remote host even if it is processed after -D, src/dst address initialization should not require that [-4|-6] be specified before the -S or -D args, receiver should be able to bind to *.<cfg_port> Achieve this by making sure that the address/port structures are initialized after all command line options are parsed. Store cfg_port in host-byte order, and use htons() to set up the sin_port/sin6_port before bind/connect, so that the network system calls get the correct values in network-byte order. Signed-off-by: Sowmini Varadhan <sowmini.varadhan(a)oracle.com> Acked-by: Willem de Bruijn <willemb(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/net/msg_zerocopy.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) --- a/tools/testing/selftests/net/msg_zerocopy.c +++ b/tools/testing/selftests/net/msg_zerocopy.c @@ -259,22 +259,28 @@ static int setup_ip6h(struct ipv6hdr *ip return sizeof(*ip6h); } -static void setup_sockaddr(int domain, const char *str_addr, void *sockaddr) + +static void setup_sockaddr(int domain, const char *str_addr, + struct sockaddr_storage *sockaddr) { struct sockaddr_in6 *addr6 = (void *) sockaddr; struct sockaddr_in *addr4 = (void *) sockaddr; switch (domain) { case PF_INET: + memset(addr4, 0, sizeof(*addr4)); addr4->sin_family = AF_INET; addr4->sin_port = htons(cfg_port); - if (inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1) + if (str_addr && + inet_pton(AF_INET, str_addr, &(addr4->sin_addr)) != 1) error(1, 0, "ipv4 parse error: %s", str_addr); break; case PF_INET6: + memset(addr6, 0, sizeof(*addr6)); addr6->sin6_family = AF_INET6; addr6->sin6_port = htons(cfg_port); - if (inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1) + if (str_addr && + inet_pton(AF_INET6, str_addr, &(addr6->sin6_addr)) != 1) error(1, 0, "ipv6 parse error: %s", str_addr); break; default: @@ -603,6 +609,7 @@ static void parse_opts(int argc, char ** sizeof(struct tcphdr) - 40 /* max tcp options */; int c; + char *daddr = NULL, *saddr = NULL; cfg_payload_len = max_payload_len; @@ -627,7 +634,7 @@ static void parse_opts(int argc, char ** cfg_cpu = strtol(optarg, NULL, 0); break; case 'D': - setup_sockaddr(cfg_family, optarg, &cfg_dst_addr); + daddr = optarg; break; case 'i': cfg_ifindex = if_nametoindex(optarg); @@ -638,7 +645,7 @@ static void parse_opts(int argc, char ** cfg_cork_mixed = true; break; case 'p': - cfg_port = htons(strtoul(optarg, NULL, 0)); + cfg_port = strtoul(optarg, NULL, 0); break; case 'r': cfg_rx = true; @@ -647,7 +654,7 @@ static void parse_opts(int argc, char ** cfg_payload_len = strtoul(optarg, NULL, 0); break; case 'S': - setup_sockaddr(cfg_family, optarg, &cfg_src_addr); + saddr = optarg; break; case 't': cfg_runtime_ms = 200 + strtoul(optarg, NULL, 10) * 1000; @@ -660,6 +667,8 @@ static void parse_opts(int argc, char ** break; } } + setup_sockaddr(cfg_family, daddr, &cfg_dst_addr); + setup_sockaddr(cfg_family, saddr, &cfg_src_addr); if (cfg_payload_len > max_payload_len) error(1, 0, "-s: payload exceeds max (%d)", max_payload_len); Patches currently in stable-queue which might be from sowmini.varadhan(a)oracle.com are queue-4.14/selftests-net-fix-bugs-in-address-and-port-initialization.patch queue-4.14/rds-reset-rs-rs_bound_addr-in-rds_add_bound-failure-path.patch

7 years, 7 months

1
0
0 0

Patch "scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag." has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-mpt3sas-proper-handling-of-set-clear-of-ata-command-pending-flag.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Chaitra P B <chaitra.basappa(a)broadcom.com> Date: Wed, 27 Dec 2017 23:09:11 -0800 Subject: scsi: mpt3sas: Proper handling of set/clear of "ATA command pending" flag. From: Chaitra P B <chaitra.basappa(a)broadcom.com> [ Upstream commit f49d4aed1315a7b766d855f1367142e682b0cc87 ] 1. In IO path, setting of "ATA command pending" flag early before device removal, invalid device handle etc., checks causes any new commands to be always returned with SAM_STAT_BUSY and when the driver removes the drive the SML issues SYNC Cache command and that command is always returned with SAM_STAT_BUSY and thus making SYNC Cache command to requeued. 2. If the driver gets an ATA PT command for a SATA drive then the driver set "ATA command pending" flag in device specific data structure not to allow any further commands until the ATA PT command is completed. However, after setting the flag if the driver decides to return the command back to upper layers without actually issuing to the firmware (i.e., returns from qcmd failure return paths) then the corresponding flag is not cleared and this prevents the driver from sending any new commands to the drive. This patch fixes above two issues by setting of "ATA command pending" flag after checking for whether device deleted, invalid device handle, device busy with task management. And by setting "ATA command pending" flag to false in all of the qcmd failure return paths after setting the flag. Signed-off-by: Chaitra P B <chaitra.basappa(a)broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -4106,19 +4106,6 @@ scsih_qcmd(struct Scsi_Host *shost, stru return 0; } - /* - * Bug work around for firmware SATL handling. The loop - * is based on atomic operations and ensures consistency - * since we're lockless at this point - */ - do { - if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { - scmd->result = SAM_STAT_BUSY; - scmd->scsi_done(scmd); - return 0; - } - } while (_scsih_set_satl_pending(scmd, true)); - sas_target_priv_data = sas_device_priv_data->sas_target; /* invalid device handle */ @@ -4144,6 +4131,19 @@ scsih_qcmd(struct Scsi_Host *shost, stru sas_device_priv_data->block) return SCSI_MLQUEUE_DEVICE_BUSY; + /* + * Bug work around for firmware SATL handling. The loop + * is based on atomic operations and ensures consistency + * since we're lockless at this point + */ + do { + if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { + scmd->result = SAM_STAT_BUSY; + scmd->scsi_done(scmd); + return 0; + } + } while (_scsih_set_satl_pending(scmd, true)); + if (scmd->sc_data_direction == DMA_FROM_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_READ; else if (scmd->sc_data_direction == DMA_TO_DEVICE) @@ -4170,6 +4170,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (!smid) { pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); + _scsih_set_satl_pending(scmd, false); goto out; } mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); @@ -4200,6 +4201,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (mpi_request->DataLength) { if (ioc->build_sg_scmd(ioc, scmd, smid)) { mpt3sas_base_free_smid(ioc, smid); + _scsih_set_satl_pending(scmd, false); goto out; } } else Patches currently in stable-queue which might be from chaitra.basappa(a)broadcom.com are queue-4.14/scsi-mpt3sas-proper-handling-of-set-clear-of-ata-command-pending-flag.patch

7 years, 7 months

1
0
0 0

Patch "scsi: megaraid_sas: unload flag should be set after scsi_remove_host is called" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: megaraid_sas: unload flag should be set after scsi_remove_host is called to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-megaraid_sas-unload-flag-should-be-set-after-scsi_remove_host-is-called.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Fri, 5 Jan 2018 05:27:41 -0800 Subject: scsi: megaraid_sas: unload flag should be set after scsi_remove_host is called From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> [ Upstream commit f3f7920b3910171b2999c7dc2335eb9f583e44f2 ] Issue - Driver returns DID_NO_CONNECT when unload is in progress, indicated using instance->unload flag. In case of dynamic unload of driver, this flag is set before calling scsi_remove_host(). While doing manual driver unload, user will see lots of prints for Sync Cache command with DID_NO_CONNECT status. Fix - Set the instance->unload flag after scsi_remove_host(). Allow device removal process to be completed and do not block any command before that. SCSI commands (like SYNC_CACHE) are received (as part of scsi_remove_host) by driver during unload will be submitted further down to the drives. Signed-off-by: Sumit Saxena <sumit.saxena(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/megaraid/megaraid_sas_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -6605,7 +6605,6 @@ static void megasas_detach_one(struct pc u32 pd_seq_map_sz; instance = pci_get_drvdata(pdev); - instance->unload = 1; host = instance->host; fusion = instance->ctrl_context; @@ -6616,6 +6615,7 @@ static void megasas_detach_one(struct pc if (instance->fw_crash_state != UNAVAILABLE) megasas_free_host_crash_buffer(instance); scsi_remove_host(instance->host); + instance->unload = 1; if (megasas_wait_for_adapter_operational(instance)) goto skip_firing_dcmds; Patches currently in stable-queue which might be from shivasharan.srikanteshwara(a)broadcom.com are queue-4.14/scsi-megaraid_sas-error-handling-for-invalid-ldcount-provided-by-firmware-in-raid-map.patch queue-4.14/scsi-megaraid_sas-unload-flag-should-be-set-after-scsi_remove_host-is-called.patch

7 years, 7 months

1
0
0 0

Patch "scsi: megaraid_sas: Error handling for invalid ldcount provided by firmware in RAID map" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: megaraid_sas: Error handling for invalid ldcount provided by firmware in RAID map to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-megaraid_sas-error-handling-for-invalid-ldcount-provided-by-firmware-in-raid-map.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Date: Fri, 5 Jan 2018 05:27:40 -0800 Subject: scsi: megaraid_sas: Error handling for invalid ldcount provided by firmware in RAID map From: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> [ Upstream commit 7ada701d0d5e5c6d357e157a72b841db3e8d03f4 ] Currently driver does not validate ldcount provided by firmware. If the value is invalid, fail RAID map validation accordingly. This issue is rare to hit in field and is fixed as part of code review. Signed-off-by: Sumit Saxena <sumit.saxena(a)broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/megaraid/megaraid_sas_fp.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) --- a/drivers/scsi/megaraid/megaraid_sas_fp.c +++ b/drivers/scsi/megaraid/megaraid_sas_fp.c @@ -168,7 +168,7 @@ static struct MR_LD_SPAN *MR_LdSpanPtrGe /* * This function will Populate Driver Map using firmware raid map */ -void MR_PopulateDrvRaidMap(struct megasas_instance *instance) +static int MR_PopulateDrvRaidMap(struct megasas_instance *instance) { struct fusion_context *fusion = instance->ctrl_context; struct MR_FW_RAID_MAP_ALL *fw_map_old = NULL; @@ -259,7 +259,7 @@ void MR_PopulateDrvRaidMap(struct megasa ld_count = (u16)le16_to_cpu(fw_map_ext->ldCount); if (ld_count > MAX_LOGICAL_DRIVES_EXT) { dev_dbg(&instance->pdev->dev, "megaraid_sas: LD count exposed in RAID map in not valid\n"); - return; + return 1; } pDrvRaidMap->ldCount = (__le16)cpu_to_le16(ld_count); @@ -285,6 +285,12 @@ void MR_PopulateDrvRaidMap(struct megasa fusion->ld_map[(instance->map_id & 1)]; pFwRaidMap = &fw_map_old->raidMap; ld_count = (u16)le32_to_cpu(pFwRaidMap->ldCount); + if (ld_count > MAX_LOGICAL_DRIVES) { + dev_dbg(&instance->pdev->dev, + "LD count exposed in RAID map in not valid\n"); + return 1; + } + pDrvRaidMap->totalSize = pFwRaidMap->totalSize; pDrvRaidMap->ldCount = (__le16)cpu_to_le16(ld_count); pDrvRaidMap->fpPdIoTimeoutSec = pFwRaidMap->fpPdIoTimeoutSec; @@ -300,6 +306,8 @@ void MR_PopulateDrvRaidMap(struct megasa sizeof(struct MR_DEV_HANDLE_INFO) * MAX_RAIDMAP_PHYSICAL_DEVICES); } + + return 0; } /* @@ -317,8 +325,8 @@ u8 MR_ValidateMapInfo(struct megasas_ins u16 ld; u32 expected_size; - - MR_PopulateDrvRaidMap(instance); + if (MR_PopulateDrvRaidMap(instance)) + return 0; fusion = instance->ctrl_context; drv_map = fusion->ld_drv_map[(instance->map_id & 1)]; Patches currently in stable-queue which might be from shivasharan.srikanteshwara(a)broadcom.com are queue-4.14/scsi-megaraid_sas-error-handling-for-invalid-ldcount-provided-by-firmware-in-raid-map.patch queue-4.14/scsi-megaraid_sas-unload-flag-should-be-set-after-scsi_remove_host-is-called.patch

7 years, 7 months

1
0
0 0

Patch "scsi: libsas: initialize sas_phy status according to response of DISCOVER" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: initialize sas_phy status according to response of DISCOVER to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: chenxiang <chenxiang66(a)hisilicon.com> Date: Thu, 4 Jan 2018 21:04:33 +0800 Subject: scsi: libsas: initialize sas_phy status according to response of DISCOVER From: chenxiang <chenxiang66(a)hisilicon.com> [ Upstream commit affc67788fe5dfffad5cda3d461db5cf2b2ff2b0 ] The status of SAS PHY is in sas_phy->enabled. There is an issue that the status of a remote SAS PHY may be initialized incorrectly: if disable remote SAS PHY through sysfs interface (such as echo 0 > /sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we will find the status of remote SAS PHY which is disabled before is 1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of remote SAS PHY is disabled and the device attached is not found. In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled according to the value of NEGOTIATED LOGICAL LINK RATE field. Signed-off-by: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: John Garry <john.garry(a)huawei.com> Signed-off-by: Jason Yan <yanaijie(a)huawei.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -293,6 +293,7 @@ static void sas_set_ex_phy(struct domain phy->phy->minimum_linkrate = dr->pmin_linkrate; phy->phy->maximum_linkrate = dr->pmax_linkrate; phy->phy->negotiated_linkrate = phy->linkrate; + phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED); skip: if (new_phy) Patches currently in stable-queue which might be from chenxiang66(a)hisilicon.com are queue-4.14/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.14/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.14/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 7 months

1
0
0 0

Patch "scsi: libsas: fix memory leak in sas_smp_get_phy_events()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: fix memory leak in sas_smp_get_phy_events() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Jason Yan <yanaijie(a)huawei.com> Date: Thu, 4 Jan 2018 21:04:31 +0800 Subject: scsi: libsas: fix memory leak in sas_smp_get_phy_events() From: Jason Yan <yanaijie(a)huawei.com> [ Upstream commit 4a491b1ab11ca0556d2fda1ff1301e862a2d44c4 ] We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie(a)huawei.com> CC: John Garry <john.garry(a)huawei.com> CC: chenqilin <chenqilin2(a)huawei.com> CC: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -695,6 +695,7 @@ int sas_smp_get_phy_events(struct sas_ph phy->phy_reset_problem_count = scsi_to_u32(&resp[24]); out: + kfree(req); kfree(resp); return res; Patches currently in stable-queue which might be from yanaijie(a)huawei.com are queue-4.14/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.14/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.14/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 7 months

1
0
0 0

Patch "scsi: libiscsi: Allow sd_shutdown on bad transport" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libiscsi: Allow sd_shutdown on bad transport to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libiscsi-allow-sd_shutdown-on-bad-transport.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Rafael David Tinoco <rafael.tinoco(a)canonical.com> Date: Thu, 7 Dec 2017 19:59:13 -0200 Subject: scsi: libiscsi: Allow sd_shutdown on bad transport From: Rafael David Tinoco <rafael.tinoco(a)canonical.com> [ Upstream commit d754941225a7dbc61f6dd2173fa9498049f9a7ee ] If, for any reason, userland shuts down iscsi transport interfaces before proper logouts - like when logging in to LUNs manually, without logging out on server shutdown, or when automated scripts can't umount/logout from logged LUNs - kernel will hang forever on its sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all still existent paths. PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow" #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c #5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10 #6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7 #7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe #8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7 #9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c This happens because iscsi_eh_cmd_timed_out(), the transport layer timeout helper, would tell the queue timeout function (scsi_times_out) to reset the request timer over and over, until the session state is back to logged in state. Unfortunately, during server shutdown, this might never happen again. Other option would be "not to handle" the issue in the transport layer. That would trigger the error handler logic, which would also need the session state to be logged in again. Best option, for such case, is to tell upper layers that the command was handled during the transport layer error handler helper, marking it as DID_NO_CONNECT, which will allow completion and inform about the problem. After the session was marked as ISCSI_STATE_FAILED, due to the first timeout during the server shutdown phase, all subsequent cmds will fail to be queued, allowing upper logic to fail faster. Signed-off-by: Rafael David Tinoco <rafael.tinoco(a)canonical.com> Reviewed-by: Lee Duncan <lduncan(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libiscsi.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1696,6 +1696,15 @@ int iscsi_queuecommand(struct Scsi_Host */ switch (session->state) { case ISCSI_STATE_FAILED: + /* + * cmds should fail during shutdown, if the session + * state is bad, allowing completion to happen + */ + if (unlikely(system_state != SYSTEM_RUNNING)) { + reason = FAILURE_SESSION_FAILED; + sc->result = DID_NO_CONNECT << 16; + break; + } case ISCSI_STATE_IN_RECOVERY: reason = FAILURE_SESSION_IN_RECOVERY; sc->result = DID_IMM_RETRY << 16; @@ -1981,6 +1990,19 @@ enum blk_eh_timer_return iscsi_eh_cmd_ti if (session->state != ISCSI_STATE_LOGGED_IN) { /* + * During shutdown, if session is prematurely disconnected, + * recovery won't happen and there will be hung cmds. Not + * handling cmds would trigger EH, also bad in this case. + * Instead, handle cmd, allow completion to happen and let + * upper layer to deal with the result. + */ + if (unlikely(system_state != SYSTEM_RUNNING)) { + sc->result = DID_NO_CONNECT << 16; + ISCSI_DBG_EH(session, "sc on shutdown, handled\n"); + rc = BLK_EH_HANDLED; + goto done; + } + /* * We are probably in the middle of iscsi recovery so let * that complete and handle the error. */ @@ -2084,7 +2106,7 @@ done: task->last_timeout = jiffies; spin_unlock(&session->frwd_lock); ISCSI_DBG_EH(session, "return %s\n", rc == BLK_EH_RESET_TIMER ? - "timer reset" : "nh"); + "timer reset" : "shutdown or nh"); return rc; } EXPORT_SYMBOL_GPL(iscsi_eh_cmd_timed_out); Patches currently in stable-queue which might be from rafael.tinoco(a)canonical.com are queue-4.14/scsi-libiscsi-allow-sd_shutdown-on-bad-transport.patch

7 years, 7 months

1
0
0 0

Patch "scsi: libsas: fix error when getting phy events" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: libsas: fix error when getting phy events to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-libsas-fix-error-when-getting-phy-events.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Jason Yan <yanaijie(a)huawei.com> Date: Thu, 4 Jan 2018 21:04:32 +0800 Subject: scsi: libsas: fix error when getting phy events From: Jason Yan <yanaijie(a)huawei.com> [ Upstream commit 2b23d9509fd7174b362482cf5f3b5f9a2265bc33 ] The intend purpose here was to goto out if smp_execute_task() returned error. Obviously something got screwed up. We will never get these link error statistics below: ~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count 0 Obviously we should goto error handler if smp_execute_task() returns non-zero. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Jason Yan <yanaijie(a)huawei.com> CC: John Garry <john.garry(a)huawei.com> CC: chenqilin <chenqilin2(a)huawei.com> CC: chenxiang <chenxiang66(a)hisilicon.com> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/libsas/sas_expander.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -686,7 +686,7 @@ int sas_smp_get_phy_events(struct sas_ph res = smp_execute_task(dev, req, RPEL_REQ_SIZE, resp, RPEL_RESP_SIZE); - if (!res) + if (res) goto out; phy->invalid_dword_count = scsi_to_u32(&resp[12]); Patches currently in stable-queue which might be from yanaijie(a)huawei.com are queue-4.14/scsi-libsas-initialize-sas_phy-status-according-to-response-of-discover.patch queue-4.14/scsi-libsas-fix-error-when-getting-phy-events.patch queue-4.14/scsi-libsas-fix-memory-leak-in-sas_smp_get_phy_events.patch

7 years, 7 months

1
0
0 0

Patch "rt2x00: do not pause queue unconditionally on error path" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rt2x00: do not pause queue unconditionally on error path to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rt2x00-do-not-pause-queue-unconditionally-on-error-path.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 13:58:16 CEST 2018 From: Stanislaw Gruszka <sgruszka(a)redhat.com> Date: Tue, 19 Dec 2017 12:33:56 +0100 Subject: rt2x00: do not pause queue unconditionally on error path From: Stanislaw Gruszka <sgruszka(a)redhat.com> [ Upstream commit 6dd80efd75ce7c2dbd9f117cf585ee2b33a42ee1 ] Pausing queue without checking threshold is racy with txdone path. Moreover we do not need pause queue on any error, but only if queue is full - in case when we send RTS frame ( other cases of almost full queue are already handled in rt2x00queue_write_tx_frame() ). Patch fixes of theoretically possible problem of pausing empty queue. Signed-off-by: Stanislaw Gruszka <sgruszka(a)redhat.com> Tested-by: Enrico Mioso <mrkiko.rs(a)gmail.com> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ralink/rt2x00/rt2x00mac.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) --- a/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00mac.c @@ -142,15 +142,25 @@ void rt2x00mac_tx(struct ieee80211_hw *h if (!rt2x00dev->ops->hw->set_rts_threshold && (tx_info->control.rates[0].flags & (IEEE80211_TX_RC_USE_RTS_CTS | IEEE80211_TX_RC_USE_CTS_PROTECT))) { - if (rt2x00queue_available(queue) <= 1) - goto exit_fail; + if (rt2x00queue_available(queue) <= 1) { + /* + * Recheck for full queue under lock to avoid race + * conditions with rt2x00lib_txdone(). + */ + spin_lock(&queue->tx_lock); + if (rt2x00queue_threshold(queue)) + rt2x00queue_pause_queue(queue); + spin_unlock(&queue->tx_lock); + + goto exit_free_skb; + } if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) - goto exit_fail; + goto exit_free_skb; } if (unlikely(rt2x00queue_write_tx_frame(queue, skb, control->sta, false))) - goto exit_fail; + goto exit_free_skb; /* * Pausing queue has to be serialized with rt2x00lib_txdone(). Note @@ -164,10 +174,6 @@ void rt2x00mac_tx(struct ieee80211_hw *h return; - exit_fail: - spin_lock(&queue->tx_lock); - rt2x00queue_pause_queue(queue); - spin_unlock(&queue->tx_lock); exit_free_skb: ieee80211_free_txskb(hw, skb); } Patches currently in stable-queue which might be from sgruszka(a)redhat.com are queue-4.14/rt2x00-do-not-pause-queue-unconditionally-on-error-path.patch

7 years, 7 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror