- Linux-stable-mirror - lists.linaro.org

Patch "sit: reload iphdr in ipip6_rcv" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sit: reload iphdr in ipip6_rcv to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sit-reload-iphdr-in-ipip6_rcv.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Date: Sun, 4 Jun 2017 14:43:43 +0800 Subject: sit: reload iphdr in ipip6_rcv From: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> [ Upstream commit b699d0035836f6712917a41e7ae58d84359b8ff9 ] Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Haishuang Yan <yanhaishuang(a)cmss.chinamobile.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/sit.c | 1 + 1 file changed, 1 insertion(+) --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -657,6 +657,7 @@ static int ipip6_rcv(struct sk_buff *skb if (iptunnel_pull_header(skb, 0, htons(ETH_P_IPV6), !net_eq(tunnel->net, dev_net(tunnel->dev)))) goto out; + iph = ip_hdr(skb); err = IP_ECN_decapsulate(iph, skb); if (unlikely(err)) { Patches currently in stable-queue which might be from yanhaishuang(a)cmss.chinamobile.com are queue-4.9/sit-reload-iphdr-in-ipip6_rcv.patch

7 years, 6 months

1
0
0 0

Patch "signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Sat, 19 Aug 2017 15:26:01 -0500 Subject: signal/powerpc: Document conflicts with SI_USER and SIGFPE and SIGTRAP From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit cf4674c46c66e45f238f8f7e81af2a444b970c0a ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result that uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME and TRAP_FIXME, siginfo_layout() will now return SIL_FAULT and the appropriate fields will be reliably copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: Paul Mackerras <paulus(a)samba.org> Cc: Kumar Gala <kumar.gala(a)freescale.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: linuxppc-dev(a)lists.ozlabs.org Ref: 9bad068c24d7 ("[PATCH] ppc32: support for e500 and 85xx") Ref: 0ed70f6105ef ("PPC32: Provide proper siginfo information on various exceptions.") History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/include/uapi/asm/siginfo.h | 15 +++++++++++++++ arch/powerpc/kernel/traps.c | 10 +++++----- 2 files changed, 20 insertions(+), 5 deletions(-) --- a/arch/powerpc/include/uapi/asm/siginfo.h +++ b/arch/powerpc/include/uapi/asm/siginfo.h @@ -17,4 +17,19 @@ #undef NSIGTRAP #define NSIGTRAP 4 +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + +/* + * SIGTRAP si_codes + */ +#ifdef __KERNEL__ +#define TRAP_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + + #endif /* _ASM_POWERPC_SIGINFO_H */ --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -793,7 +793,7 @@ void unknown_exception(struct pt_regs *r printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); exception_exit(prev_state); } @@ -815,7 +815,7 @@ bail: void RunModeException(struct pt_regs *regs) { - _exception(SIGTRAP, regs, 0, 0); + _exception(SIGTRAP, regs, TRAP_FIXME, 0); } void single_step_exception(struct pt_regs *regs) @@ -851,7 +851,7 @@ static void emulate_single_step(struct p static inline int __parse_fpscr(unsigned long fpscr) { - int ret = 0; + int ret = FPE_FIXME; /* Invalid operation */ if ((fpscr & FPSCR_VE) && (fpscr & FPSCR_VX)) @@ -1855,7 +1855,7 @@ void SPEFloatingPointException(struct pt extern int do_spe_mathemu(struct pt_regs *regs); unsigned long spefscr; int fpexc_mode; - int code = 0; + int code = FPE_FIXME; int err; flush_spe_to_thread(current); @@ -1924,7 +1924,7 @@ void SPEFloatingPointRoundException(stru printk(KERN_ERR "unrecognized spe instruction " "in %s at %lx\n", current->comm, regs->nip); } else { - _exception(SIGFPE, regs, 0, regs->nip); + _exception(SIGFPE, regs, FPE_FIXME, regs->nip); return; } } Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.9/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 6 months

1
0
0 0

Patch "signal/metag: Document a conflict with SI_USER with SIGFPE" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/metag: Document a conflict with SI_USER with SIGFPE to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Tue, 1 Aug 2017 10:37:40 -0500 Subject: signal/metag: Document a conflict with SI_USER with SIGFPE From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit b80328be53c215346b153769267b38f531d89b4f ] Setting si_code to 0 results in a userspace seeing an si_code of 0. This is the same si_code as SI_USER. Posix and common sense requires that SI_USER not be a signal specific si_code. As such this use of 0 for the si_code is a pretty horribly broken ABI. Further use of si_code == 0 guaranteed that copy_siginfo_to_user saw a value of __SI_KILL and now sees a value of SIL_KILL with the result hat uid and pid fields are copied and which might copying the si_addr field by accident but certainly not by design. Making this a very flakey implementation. Utilizing FPE_FIXME siginfo_layout will now return SIL_FAULT and the appropriate fields will reliably be copied. Possible ABI fixes includee: - Send the signal without siginfo - Don't generate a signal - Possibly assign and use an appropriate si_code - Don't handle cases which can't happen Cc: James Hogan <james.hogan(a)imgtec.com> Cc: linux-metag(a)vger.kernel.org Ref: ac919f0883e5 ("metag: Traps") Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/metag/include/uapi/asm/siginfo.h | 7 +++++++ arch/metag/kernel/traps.c | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) --- a/arch/metag/include/uapi/asm/siginfo.h +++ b/arch/metag/include/uapi/asm/siginfo.h @@ -5,4 +5,11 @@ #include <asm-generic/siginfo.h> +/* + * SIGFPE si_codes + */ +#ifdef __KERNEL__ +#define FPE_FIXME 0 /* Broken dup of SI_USER */ +#endif /* __KERNEL__ */ + #endif --- a/arch/metag/kernel/traps.c +++ b/arch/metag/kernel/traps.c @@ -732,7 +732,7 @@ TBIRES fpe_handler(TBIRES State, int Sig else if (error_state & TXSTAT_FPE_INEXACT_BIT) info.si_code = FPE_FLTRES; else - info.si_code = 0; + info.si_code = FPE_FIXME; info.si_errno = 0; info.si_addr = (__force void __user *)regs->ctx.CurrPC; force_sig_info(SIGFPE, &info, current); Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.9/signal-metag-document-a-conflict-with-si_user-with-sigfpe.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/signal-arm-document-conflicts-with-si_user-and-sigfpe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch

7 years, 6 months

1
0
0 0

Patch "serial: sh-sci: Fix race condition causing garbage during shutdown" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix race condition causing garbage during shutdown to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Tue, 25 Apr 2017 20:15:35 +0200 Subject: serial: sh-sci: Fix race condition causing garbage during shutdown From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit 1cf4a7efdc71cab84c42cfea7200608711ea954f ] If DMA is enabled and used, a burst of old data may be seen on the serial console during "poweroff" or "reboot". uart_flush_buffer() clears the circular buffer, but sci_port.tx_dma_len is not reset. This leads to a circular buffer overflow, dumping (UART_XMIT_SIZE - sci_port.tx_dma_len) bytes. To fix this, add a .flush_buffer() callback that resets sci_port.tx_dma_len. Inspired by commit 31ca2c63fdc0aee7 ("tty/serial: atmel: fix race condition (TX+DMA)"). Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sh-sci.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1545,7 +1545,16 @@ static void sci_free_dma(struct uart_por if (s->chan_rx) sci_rx_dma_release(s, false); } -#else + +static void sci_flush_buffer(struct uart_port *port) +{ + /* + * In uart_flush_buffer(), the xmit circular buffer has just been + * cleared, so we have to reset tx_dma_len accordingly. + */ + to_sci_port(port)->tx_dma_len = 0; +} +#else /* !CONFIG_SERIAL_SH_SCI_DMA */ static inline void sci_request_dma(struct uart_port *port) { } @@ -1553,7 +1562,9 @@ static inline void sci_request_dma(struc static inline void sci_free_dma(struct uart_port *port) { } -#endif + +#define sci_flush_buffer NULL +#endif /* !CONFIG_SERIAL_SH_SCI_DMA */ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) { @@ -2551,6 +2562,7 @@ static const struct uart_ops sci_uart_op .break_ctl = sci_break_ctl, .startup = sci_startup, .shutdown = sci_shutdown, + .flush_buffer = sci_flush_buffer, .set_termios = sci_set_termios, .pm = sci_pm, .type = sci_type, Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.9/acpi-ec-fix-debugfs_create_-usage.patch queue-4.9/serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch queue-4.9/clk-renesas-rcar-gen2-fix-pll0-on-r-car-v2h-and-e2.patch queue-4.9/sh_eth-use-platform-device-for-printing-before-register_netdev.patch queue-4.9/arm-dts-armadillo800eva-split-lcd-mux-and-gpio.patch

7 years, 6 months

1
0
0 0

Patch "sh_eth: Use platform device for printing before register_netdev()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sh_eth: Use platform device for printing before register_netdev() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sh_eth-use-platform-device-for-printing-before-register_netdev.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Geert Uytterhoeven <geert+renesas(a)glider.be> Date: Thu, 18 May 2017 15:01:34 +0200 Subject: sh_eth: Use platform device for printing before register_netdev() From: Geert Uytterhoeven <geert+renesas(a)glider.be> [ Upstream commit 5f5c5449acad0cd3322e53e1ac68c044483b0aa5 ] The MDIO initialization failure message is printed using the network device, before it has been registered, leading to: (null): failed to initialise MDIO Use the platform device instead to fix this: sh-eth ee700000.ethernet: failed to initialise MDIO Fixes: daacf03f0bbfefee ("sh_eth: Register MDIO bus before registering the network device") Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/renesas/sh_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/renesas/sh_eth.c +++ b/drivers/net/ethernet/renesas/sh_eth.c @@ -3133,7 +3133,7 @@ static int sh_eth_drv_probe(struct platf /* MDIO bus init */ ret = sh_mdio_init(mdp, pd); if (ret) { - dev_err(&ndev->dev, "failed to initialise MDIO\n"); + dev_err(&pdev->dev, "failed to initialise MDIO\n"); goto out_release; } Patches currently in stable-queue which might be from geert+renesas(a)glider.be are queue-4.9/acpi-ec-fix-debugfs_create_-usage.patch queue-4.9/serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch queue-4.9/clk-renesas-rcar-gen2-fix-pll0-on-r-car-v2h-and-e2.patch queue-4.9/sh_eth-use-platform-device-for-printing-before-register_netdev.patch queue-4.9/arm-dts-armadillo800eva-split-lcd-mux-and-gpio.patch

7 years, 6 months

1
0
0 0

Patch "serial: 8250: omap: Disable DMA for console UART" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250: omap: Disable DMA for console UART to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-8250-omap-disable-dma-for-console-uart.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Vignesh R <vigneshr(a)ti.com> Date: Sat, 22 Apr 2017 18:37:19 +0530 Subject: serial: 8250: omap: Disable DMA for console UART From: Vignesh R <vigneshr(a)ti.com> [ Upstream commit 84b40e3b57eef1417479c00490dd4c9f6e5ffdbc ] Kernel always writes log messages to console via serial8250_console_write()->serial8250_console_putchar() which directly accesses UART_TX register _without_ using DMA. But, if other processes like systemd using same UART port, then these writes are handled by a different code flow using 8250_omap driver where there is provision to use DMA. It seems that it is possible that both DMA and CPU might simultaneously put data to UART FIFO and lead to potential loss of data due to FIFO overflow and weird data corruption. This happens when both kernel console and userspace tries to write simultaneously to the same UART port. Therefore, disable DMA on kernel console port to avoid potential race between CPU and DMA. Signed-off-by: Vignesh R <vigneshr(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_omap.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -613,6 +613,10 @@ static int omap_8250_startup(struct uart up->lsr_saved_flags = 0; up->msr_saved_flags = 0; + /* Disable DMA for console UART */ + if (uart_console(port)) + up->dma = NULL; + if (up->dma) { ret = serial8250_request_dma(up); if (ret) { Patches currently in stable-queue which might be from vigneshr(a)ti.com are queue-4.9/serial-8250-omap-disable-dma-for-console-uart.patch

7 years, 6 months

1
0
0 0

Patch "selinux: do not check open permission on sockets" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selinux: do not check open permission on sockets to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selinux-do-not-check-open-permission-on-sockets.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Stephen Smalley <sds(a)tycho.nsa.gov> Date: Fri, 12 May 2017 12:41:24 -0400 Subject: selinux: do not check open permission on sockets From: Stephen Smalley <sds(a)tycho.nsa.gov> [ Upstream commit ccb544781d34afdb73a9a73ae53035d824d193bf ] open permission is currently only defined for files in the kernel (COMMON_FILE_PERMS rather than COMMON_FILE_SOCK_PERMS). Construction of an artificial test case that tries to open a socket via /proc/pid/fd will generate a recvfrom avc denial because recvfrom and open happen to map to the same permission bit in socket vs file classes. open of a socket via /proc/pid/fd is not supported by the kernel regardless and will ultimately return ENXIO. But we hit the permission check first and can thus produce these odd/misleading denials. Omit the open check when operating on a socket. Signed-off-by: Stephen Smalley <sds(a)tycho.nsa.gov> Signed-off-by: Paul Moore <paul(a)paul-moore.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- security/selinux/hooks.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -2033,8 +2033,9 @@ static inline u32 file_to_av(struct file static inline u32 open_file_to_av(struct file *file) { u32 av = file_to_av(file); + struct inode *inode = file_inode(file); - if (selinux_policycap_openperm) + if (selinux_policycap_openperm && inode->i_sb->s_magic != SOCKFS_MAGIC) av |= FILE__OPEN; return av; @@ -3031,6 +3032,7 @@ static int selinux_inode_permission(stru static int selinux_inode_setattr(struct dentry *dentry, struct iattr *iattr) { const struct cred *cred = current_cred(); + struct inode *inode = d_backing_inode(dentry); unsigned int ia_valid = iattr->ia_valid; __u32 av = FILE__WRITE; @@ -3046,8 +3048,10 @@ static int selinux_inode_setattr(struct ATTR_ATIME_SET | ATTR_MTIME_SET | ATTR_TIMES_SET)) return dentry_has_perm(cred, dentry, FILE__SETATTR); - if (selinux_policycap_openperm && (ia_valid & ATTR_SIZE) - && !(ia_valid & ATTR_FILE)) + if (selinux_policycap_openperm && + inode->i_sb->s_magic != SOCKFS_MAGIC && + (ia_valid & ATTR_SIZE) && + !(ia_valid & ATTR_FILE)) av |= FILE__OPEN; return dentry_has_perm(cred, dentry, av); Patches currently in stable-queue which might be from sds(a)tycho.nsa.gov are queue-4.9/selinux-do-not-check-open-permission-on-sockets.patch

7 years, 6 months

1
0
0 0

Patch "selftests/powerpc: Fix TM resched DSCR test with some compilers" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selftests/powerpc: Fix TM resched DSCR test with some compilers to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selftests-powerpc-fix-tm-resched-dscr-test-with-some-compilers.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Michael Ellerman <mpe(a)ellerman.id.au> Date: Fri, 19 May 2017 11:29:04 +1000 Subject: selftests/powerpc: Fix TM resched DSCR test with some compilers From: Michael Ellerman <mpe(a)ellerman.id.au> [ Upstream commit fe06fe860250a4f01d0eaf70a2563b1997174a74 ] The tm-resched-dscr test has started failing sometimes, depending on what compiler it's built with, eg: test: tm_resched_dscr Check DSCR TM context switch: tm-resched-dscr: tm-resched-dscr.c:76: test_body: Assertion `rv' failed. !! child died by signal 6 When it fails we see that the compiler doesn't initialise rv to 1 before entering the inline asm block. Although that's counter intuitive, it is allowed because we tell the compiler that the inline asm will write to rv (using "=r"), meaning the original value is irrelevant. Marking it as a read/write parameter would presumably work, but it seems simpler to fix it by setting the initial value of rv in the inline asm. Fixes: 96d016108640 ("powerpc: Correct DSCR during TM context switch") Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au> Acked-by: Michael Neuling <mikey(a)neuling.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/powerpc/tm/tm-resched-dscr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c +++ b/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c @@ -42,12 +42,12 @@ int test_body(void) printf("Check DSCR TM context switch: "); fflush(stdout); for (;;) { - rv = 1; asm __volatile__ ( /* set a known value into the DSCR */ "ld 3, %[dscr1];" "mtspr %[sprn_dscr], 3;" + "li %[rv], 1;" /* start and suspend a transaction */ "tbegin.;" "beq 1f;" Patches currently in stable-queue which might be from mpe(a)ellerman.id.au are queue-4.9/selftests-powerpc-fix-tm-resched-dscr-test-with-some-compilers.patch queue-4.9/powerpc-modules-if-mprofile-kernel-is-enabled-add-it-to-vermagic.patch queue-4.9/powerpc-mm-fix-virt_addr_valid-etc.-on-64-bit-hash.patch queue-4.9/powerpc-spufs-fix-coredump-of-spu-contexts.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/signal-powerpc-document-conflicts-with-si_user-and-sigfpe-and-sigtrap.patch queue-4.9/powerpc-don-t-clobber-tcr-when-setting-tcr.patch queue-4.9/powerpc-8xx-fix-mpc8xx_get_irq-return-on-no-irq.patch

7 years, 6 months

1
0
0 0

Patch "sdhci: Advertise 2.0v supply on SDIO host controller" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sdhci: Advertise 2.0v supply on SDIO host controller to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Date: Thu, 11 Jan 2018 15:51:58 +0200 Subject: sdhci: Advertise 2.0v supply on SDIO host controller From: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> [ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ] On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO, requires 2.0v, while the host, according to Intel Merrifield TRM, supports 1.8v supply only. The card announces itself as mmc2: new ultra high speed DDR50 SDIO card at address 0001 Introduce a custom OCR mask for SDIO host controller on Intel Merrifield and add a special case to sdhci_set_power_noreg() to override 2.0v supply by enforcing 1.8v power choice. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mmc/host/sdhci-pci-core.c | 2 ++ drivers/mmc/host/sdhci.c | 7 +++++++ 2 files changed, 9 insertions(+) --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -492,6 +492,8 @@ static int intel_mrfld_mmc_probe_slot(st slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V; break; case INTEL_MRFLD_SDIO: + /* Advertise 2.0v for compatibility with the SDIO card's OCR */ + slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195; slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD; break; --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1404,6 +1404,13 @@ void sdhci_set_power_noreg(struct sdhci_ if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: + /* + * Without a regulator, SDHCI does not support 2.0v + * so we only get here if the driver deliberately + * added the 2.0v range to ocr_avail. Map it to 1.8v + * for the purpose of turning on the power. + */ + case MMC_VDD_20_21: pwr = SDHCI_POWER_180; break; case MMC_VDD_29_30: Patches currently in stable-queue which might be from andriy.shevchenko(a)linux.intel.com are queue-4.9/gpio-crystalcove-do-not-write-regular-gpio-registers-for-virtual-gpios.patch queue-4.9/sdhci-advertise-2.0v-supply-on-sdio-host-controller.patch

7 years, 6 months

1
0
0 0

Patch "selftests: kselftest_harness: Fix compile warning" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled selftests: kselftest_harness: Fix compile warning to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: selftests-kselftest_harness-fix-compile-warning.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Mickaël Salaün" <mic(a)digikod.net> Date: Sun, 11 Jun 2017 14:32:58 +0200 Subject: selftests: kselftest_harness: Fix compile warning From: "Mickaël Salaün" <mic(a)digikod.net> [ Upstream commit 34a048cc06802556e5f96f325dc32cc2f6a11225 ] Do not confuse the compiler with a semicolon preceding a block. Replace the semicolon with an empty block to avoid a warning: gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf In file included from seccomp_bpf.c:40:0: seccomp_bpf.c: In function âchange_syscallâ: ../kselftest_harness.h:558:2: warning: this âforâ clause does not guard... [-Wmisleading-indentation] for (; _metadata->trigger; _metadata->trigger = __bail(_assert)) ^ ../kselftest_harness.h:574:14: note: in expansion of macro âOPTIONAL_HANDLERâ } while (0); OPTIONAL_HANDLER(_assert) ^~~~~~~~~~~~~~~~ ../kselftest_harness.h:440:2: note: in expansion of macro â__EXPECTâ __EXPECT(expected, seen, ==, 0) ^~~~~~~~ seccomp_bpf.c:1313:2: note: in expansion of macro âEXPECT_EQâ EXPECT_EQ(0, ret); ^~~~~~~~~ seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the âforâ { ^ Signed-off-by: MickaÃ«l SalaÃ¼n <mic(a)digikod.net> Cc: Andy Lutomirski <luto(a)amacapital.net> Cc: Kees Cook <keescook(a)chromium.org> Cc: Shuah Khan <shuahkh(a)osg.samsung.com> Cc: Will Drewry <wad(a)chromium.org> Acked-by: Kees Cook <keescook(a)chromium.org> Signed-off-by: Shuah Khan <shuahkh(a)osg.samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- tools/testing/selftests/seccomp/seccomp_bpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/tools/testing/selftests/seccomp/seccomp_bpf.c +++ b/tools/testing/selftests/seccomp/seccomp_bpf.c @@ -1318,7 +1318,7 @@ void change_syscall(struct __test_metada iov.iov_len = sizeof(regs); ret = ptrace(PTRACE_GETREGSET, tracee, NT_PRSTATUS, &iov); #endif - EXPECT_EQ(0, ret); + EXPECT_EQ(0, ret) {} #if defined(__x86_64__) || defined(__i386__) || defined(__powerpc__) || \ defined(__s390__) || defined(__hppa__) Patches currently in stable-queue which might be from mic(a)digikod.net are queue-4.9/selftests-kselftest_harness-fix-compile-warning.patch

7 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror