- Linux-stable-mirror - lists.linaro.org

Patch "net: freescale: fix potential null pointer dereference" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: freescale: fix potential null pointer dereference to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-freescale-fix-potential-null-pointer-dereference.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> Date: Tue, 30 May 2017 17:38:43 -0500 Subject: net: freescale: fix potential null pointer dereference From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> [ Upstream commit 06d2d6431bc8d41ef5ffd8bd4b52cea9f72aed22 ] Add NULL check before dereferencing pointer _id_ in order to avoid a potential NULL pointer dereference. Addresses-Coverity-ID: 1397995 Signed-off-by: Gustavo A. R. Silva <garsilva(a)embeddedor.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/freescale/fsl_pq_mdio.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -382,7 +382,7 @@ static int fsl_pq_mdio_probe(struct plat { const struct of_device_id *id = of_match_device(fsl_pq_mdio_match, &pdev->dev); - const struct fsl_pq_mdio_data *data = id->data; + const struct fsl_pq_mdio_data *data; struct device_node *np = pdev->dev.of_node; struct resource res; struct device_node *tbi; @@ -390,6 +390,13 @@ static int fsl_pq_mdio_probe(struct plat struct mii_bus *new_bus; int err; + if (!id) { + dev_err(&pdev->dev, "Failed to match device\n"); + return -ENODEV; + } + + data = id->data; + dev_dbg(&pdev->dev, "found %s compatible node\n", id->compatible); new_bus = mdiobus_alloc_size(sizeof(*priv)); Patches currently in stable-queue which might be from garsilva(a)embeddedor.com are queue-4.4/net-freescale-fix-potential-null-pointer-dereference.patch

7 years, 6 months

1
0
0 0

Patch "net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-ethernet-ti-cpsw-adjust-cpsw-fifos-depth-for-fullduplex-flow-control.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Grygorii Strashko <grygorii.strashko(a)ti.com> Date: Mon, 8 May 2017 14:21:21 -0500 Subject: net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control From: Grygorii Strashko <grygorii.strashko(a)ti.com> [ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ] When users set flow control using ethtool the bits are set properly in the CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size reset value. When receive flow control is enabled on a port, the port's associated FIFO block allocation must be adjusted. The port RX allocation must increase to accommodate the flow control runout. The TRM recommends numbers of 5 or 6. Hence, apply required Port FIFO configuration to Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during interface initialization. Cc: Schuyler Patton <spatton(a)ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko(a)ti.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/ti/cpsw.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -280,6 +280,10 @@ struct cpsw_ss_regs { /* Bit definitions for the CPSW1_TS_SEQ_LTYPE register */ #define CPSW_V1_SEQ_ID_OFS_SHIFT 16 +#define CPSW_MAX_BLKS_TX 15 +#define CPSW_MAX_BLKS_TX_SHIFT 4 +#define CPSW_MAX_BLKS_RX 5 + struct cpsw_host_regs { u32 max_blks; u32 blk_cnt; @@ -1127,11 +1131,23 @@ static void cpsw_slave_open(struct cpsw_ switch (priv->version) { case CPSW_VERSION_1: slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP); + /* Increase RX FIFO size to 5 for supporting fullduplex + * flow control mode + */ + slave_write(slave, + (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) | + CPSW_MAX_BLKS_RX, CPSW1_MAX_BLKS); break; case CPSW_VERSION_2: case CPSW_VERSION_3: case CPSW_VERSION_4: slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP); + /* Increase RX FIFO size to 5 for supporting fullduplex + * flow control mode + */ + slave_write(slave, + (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) | + CPSW_MAX_BLKS_RX, CPSW2_MAX_BLKS); break; } Patches currently in stable-queue which might be from grygorii.strashko(a)ti.com are queue-4.4/net-ethernet-ti-cpsw-adjust-cpsw-fifos-depth-for-fullduplex-flow-control.patch

7 years, 6 months

1
0
0 0

Patch "net: emac: fix reset timeout with AR8035 phy" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: emac: fix reset timeout with AR8035 phy to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-emac-fix-reset-timeout-with-ar8035-phy.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Christian Lamparter <chunkeey(a)googlemail.com> Date: Wed, 7 Jun 2017 15:51:15 +0200 Subject: net: emac: fix reset timeout with AR8035 phy From: Christian Lamparter <chunkeey(a)googlemail.com> [ Upstream commit 19d90ece81da802207a9b91ce95a29fbdc40626e ] This patch fixes a problem where the AR8035 PHY can't be detected on an Cisco Meraki MR24, if the ethernet cable is not connected on boot. Russell Senior provided steps to reproduce the issue: |Disconnect ethernet cable, apply power, wait until device has booted, |plug in ethernet, check for interfaces, no eth0 is listed. | |This appears to be a problem during probing of the AR8035 Phy chip. |When ethernet has no link, the phy detection fails, and eth0 is not |created. Plugging ethernet later has no effect, because there is no |interface as far as the kernel is concerned. The relevant part of |the boot log looks like this: |this is the failing case: | |[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout |[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY! |and the succeeding case: | |[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:.. |[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01) Based on the comment and the commit message of commit 23fbb5a87c56 ("emac: Fix EMAC soft reset on 460EX/GT"). This is because the AR8035 PHY doesn't provide the TX Clock, if the ethernet cable is not attached. This causes the reset to timeout and the PHY detection code in emac_init_phy() is unable to detect the AR8035 PHY. As a result, the emac driver bails out early and the user left with no ethernet. In order to stay compatible with existing configurations, the driver tries the current reset approach at first. Only if the first attempt timed out, it does perform one more retry with the clock temporarily switched to the internal source for just the duration of the reset. LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687> Cc: Chris Blake <chrisrblake93(a)gmail.com> Reported-by: Russell Senior <russell(a)personaltelco.net> Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT") Signed-off-by: Christian Lamparter <chunkeey(a)googlemail.com> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/ibm/emac/core.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -342,6 +342,7 @@ static int emac_reset(struct emac_instan { struct emac_regs __iomem *p = dev->emacp; int n = 20; + bool __maybe_unused try_internal_clock = false; DBG(dev, "reset" NL); @@ -354,6 +355,7 @@ static int emac_reset(struct emac_instan } #ifdef CONFIG_PPC_DCR_NATIVE +do_retry: /* * PPC460EX/GT Embedded Processor Advanced User's Manual * section 28.10.1 Mode Register 0 (EMACx_MR0) states: @@ -361,10 +363,19 @@ static int emac_reset(struct emac_instan * of the EMAC. If none is present, select the internal clock * (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1). * After a soft reset, select the external clock. + * + * The AR8035-A PHY Meraki MR24 does not provide a TX Clk if the + * ethernet cable is not attached. This causes the reset to timeout + * and the PHY detection code in emac_init_phy() is unable to + * communicate and detect the AR8035-A PHY. As a result, the emac + * driver bails out early and the user has no ethernet. + * In order to stay compatible with existing configurations, the + * driver will temporarily switch to the internal clock, after + * the first reset fails. */ if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { - if (dev->phy_address == 0xffffffff && - dev->phy_map == 0xffffffff) { + if (try_internal_clock || (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff)) { /* No PHY: select internal loop clock before reset */ dcri_clrset(SDR0, SDR0_ETH_CFG, 0, SDR0_ETH_CFG_ECS << dev->cell_index); @@ -382,8 +393,15 @@ static int emac_reset(struct emac_instan #ifdef CONFIG_PPC_DCR_NATIVE if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { - if (dev->phy_address == 0xffffffff && - dev->phy_map == 0xffffffff) { + if (!n && !try_internal_clock) { + /* first attempt has timed out. */ + n = 20; + try_internal_clock = true; + goto do_retry; + } + + if (try_internal_clock || (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff)) { /* No PHY: restore external clock source after reset */ dcri_clrset(SDR0, SDR0_ETH_CFG, SDR0_ETH_CFG_ECS << dev->cell_index, 0); Patches currently in stable-queue which might be from chunkeey(a)googlemail.com are queue-4.4/net-emac-fix-reset-timeout-with-ar8035-phy.patch

7 years, 6 months

1
0
0 0

Patch "net: cdc_ncm: Fix TX zero padding" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: cdc_ncm: Fix TX zero padding to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-cdc_ncm-fix-tx-zero-padding.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Jim Baxter <jim_baxter(a)mentor.com> Date: Mon, 8 May 2017 13:49:57 +0100 Subject: net: cdc_ncm: Fix TX zero padding From: Jim Baxter <jim_baxter(a)mentor.com> [ Upstream commit aeca3a77b1e0ed06a095933b89c86aed007383eb ] The zero padding that is added to NTB's does not zero the memory correctly. This is because the skb_put modifies the value of skb_out->len which results in the memset command not setting any memory to zero as (ctx->tx_max - skb_out->len) == 0. I have resolved this by storing the size of the memory to be zeroed before the skb_put and using this in the memset call. Signed-off-by: Jim Baxter <jim_baxter(a)mentor.com> Reviewed-by: Bjørn Mork <bjorn(a)mork.no> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/usb/cdc_ncm.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1069,6 +1069,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev u16 n = 0, index, ndplen; u8 ready2send = 0; u32 delayed_ndp_size; + size_t padding_count; /* When our NDP gets written in cdc_ncm_ndp(), then skb_out->len gets updated * accordingly. Otherwise, we should check here. @@ -1225,11 +1226,13 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev * a ZLP after full sized NTBs. */ if (!(dev->driver_info->flags & FLAG_SEND_ZLP) && - skb_out->len > ctx->min_tx_pkt) - memset(skb_put(skb_out, ctx->tx_max - skb_out->len), 0, - ctx->tx_max - skb_out->len); - else if (skb_out->len < ctx->tx_max && (skb_out->len % dev->maxpacket) == 0) + skb_out->len > ctx->min_tx_pkt) { + padding_count = ctx->tx_max - skb_out->len; + memset(skb_put(skb_out, padding_count), 0, padding_count); + } else if (skb_out->len < ctx->tx_max && + (skb_out->len % dev->maxpacket) == 0) { *skb_put(skb_out, 1) = 0; /* force short packet */ + } /* set final frame length */ nth16 = (struct usb_cdc_ncm_nth16 *)skb_out->data; Patches currently in stable-queue which might be from jim_baxter(a)mentor.com are queue-4.4/net-cdc_ncm-fix-tx-zero-padding.patch

7 years, 6 months

1
0
0 0

Patch "neighbour: update neigh timestamps iff update is effective" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled neighbour: update neigh timestamps iff update is effective to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: neighbour-update-neigh-timestamps-iff-update-is-effective.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Ihar Hrachyshka <ihrachys(a)redhat.com> Date: Tue, 16 May 2017 08:44:24 -0700 Subject: neighbour: update neigh timestamps iff update is effective From: Ihar Hrachyshka <ihrachys(a)redhat.com> [ Upstream commit 77d7123342dcf6442341b67816321d71da8b2b16 ] It's a common practice to send gratuitous ARPs after moving an IP address to another device to speed up healing of a service. To fulfill service availability constraints, the timing of network peers updating their caches to point to a new location of an IP address can be particularly important. Sometimes neigh_update calls won't touch neither lladdr nor state, for example if an update arrives in locktime interval. The neigh->updated value is tested by the protocol specific neigh code, which in turn will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the call to neigh_update() or not. As a result, we may effectively ignore the update request, bailing out of touching the neigh entry, except that we still bump its timestamps inside neigh_update. This may be a problem for updates arriving in quick succession. For example, consider the following scenario: A service is moved to another device with its IP address. The new device sends three gratuitous ARP requests into the network with ~1 seconds interval between them. Just before the first request arrives to one of network peer nodes, its neigh entry for the IP address transitions from STALE to DELAY. This transition, among other things, updates neigh->updated. Once the kernel receives the first gratuitous ARP, it ignores it because its arrival time is inside the locktime interval. The kernel still bumps neigh->updated. Then the second gratuitous ARP request arrives, and it's also ignored because it's still in the (new) locktime interval. Same happens for the third request. The node eventually heals itself (after delay_first_probe_time seconds since the initial transition to DELAY state), but it just wasted some time and require a new ARP request/reply round trip. This unfortunate behaviour both puts more load on the network, as well as reduces service availability. This patch changes neigh_update so that it bumps neigh->updated (as well as neigh->confirmed) only once we are sure that either lladdr or entry state will change). In the scenario described above, it means that the second gratuitous ARP request will actually update the entry lladdr. Ideally, we would update the neigh entry on the very first gratuitous ARP request. The locktime mechanism is designed to ignore ARP updates in a short timeframe after a previous ARP update was honoured by the kernel layer. This would require tracking timestamps for state transitions separately from timestamps when actual updates are received. This would probably involve changes in neighbour struct. Therefore, the patch doesn't tackle the issue of the first gratuitous APR ignored, leaving it for a follow-up. Signed-off-by: Ihar Hrachyshka <ihrachys(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/core/neighbour.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1132,10 +1132,6 @@ int neigh_update(struct neighbour *neigh lladdr = neigh->ha; } - if (new & NUD_CONNECTED) - neigh->confirmed = jiffies; - neigh->updated = jiffies; - /* If entry was valid and address is not changed, do not change entry state, if new one is STALE. */ @@ -1159,6 +1155,16 @@ int neigh_update(struct neighbour *neigh } } + /* Update timestamps only once we know we will make a change to the + * neighbour entry. Otherwise we risk to move the locktime window with + * noop updates and ignore relevant ARP updates. + */ + if (new != old || lladdr != neigh->ha) { + if (new & NUD_CONNECTED) + neigh->confirmed = jiffies; + neigh->updated = jiffies; + } + if (new != old) { neigh_del_timer(neigh); if (new & NUD_PROBE) Patches currently in stable-queue which might be from ihrachys(a)redhat.com are queue-4.4/arp-honour-gratuitous-arp-_replies_.patch queue-4.4/neighbour-update-neigh-timestamps-iff-update-is-effective.patch

7 years, 6 months

1
0
0 0

Patch "mlx5: fix bug reading rss_hash_type from CQE" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mlx5: fix bug reading rss_hash_type from CQE to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mlx5-fix-bug-reading-rss_hash_type-from-cqe.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Jesper Dangaard Brouer <brouer(a)redhat.com> Date: Mon, 22 May 2017 20:13:07 +0200 Subject: mlx5: fix bug reading rss_hash_type from CQE From: Jesper Dangaard Brouer <brouer(a)redhat.com> [ Upstream commit 12e8b570e732eaa5eae3a2895ba3fbcf91bde2b4 ] Masks for extracting part of the Completion Queue Entry (CQE) field rss_hash_type was swapped, namely CQE_RSS_HTYPE_IP and CQE_RSS_HTYPE_L4. The bug resulted in setting skb->l4_hash, even-though the rss_hash_type indicated that hash was NOT computed over the L4 (UDP or TCP) part of the packet. Added comments from the datasheet, to make it more clear what these masks are selecting. Signed-off-by: Jesper Dangaard Brouer <brouer(a)redhat.com> Acked-by: Saeed Mahameed <saeedm(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/mlx5/device.h | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) --- a/include/linux/mlx5/device.h +++ b/include/linux/mlx5/device.h @@ -635,8 +635,14 @@ enum { }; enum { - CQE_RSS_HTYPE_IP = 0x3 << 6, - CQE_RSS_HTYPE_L4 = 0x3 << 2, + CQE_RSS_HTYPE_IP = 0x3 << 2, + /* cqe->rss_hash_type[3:2] - IP destination selected for hash + * (00 = none, 01 = IPv4, 10 = IPv6, 11 = Reserved) + */ + CQE_RSS_HTYPE_L4 = 0x3 << 6, + /* cqe->rss_hash_type[7:6] - L4 destination selected for hash + * (00 = none, 01 = TCP. 10 = UDP, 11 = IPSEC.SPI + */ }; enum { Patches currently in stable-queue which might be from brouer(a)redhat.com are queue-4.4/mlx5-fix-bug-reading-rss_hash_type-from-cqe.patch

7 years, 6 months

1
0
0 0

Patch "mISDN: Fix a sleep-in-atomic bug" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mISDN: Fix a sleep-in-atomic bug to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: misdn-fix-a-sleep-in-atomic-bug.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Jia-Ju Bai <baijiaju1990(a)163.com> Date: Wed, 31 May 2017 15:08:25 +0800 Subject: mISDN: Fix a sleep-in-atomic bug From: Jia-Ju Bai <baijiaju1990(a)163.com> [ Upstream commit 93818da5eed63fbc17b64080406ea53b86b23309 ] The driver may sleep under a read spin lock, and the function call path is: send_socklist (acquire the lock by read_lock) skb_copy(GFP_KERNEL) --> may sleep To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by: Jia-Ju Bai <baijiaju1990(a)163.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/isdn/mISDN/stack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -72,7 +72,7 @@ send_socklist(struct mISDN_sock_list *sl if (sk->sk_state != MISDN_BOUND) continue; if (!cskb) - cskb = skb_copy(skb, GFP_KERNEL); + cskb = skb_copy(skb, GFP_ATOMIC); if (!cskb) { printk(KERN_WARNING "%s no skb\n", __func__); break; Patches currently in stable-queue which might be from baijiaju1990(a)163.com are queue-4.4/misdn-fix-a-sleep-in-atomic-bug.patch queue-4.4/qlcnic-fix-a-sleep-in-atomic-bug-in-qlcnic_82xx_hw_write_wx_2m-and-qlcnic_82xx_hw_read_wx_2m.patch

7 years, 6 months

1
0
0 0

Patch "MIPS: mm: fixed mappings: correct initialisation" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: mm: fixed mappings: correct initialisation to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-mm-fixed-mappings-correct-initialisation.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Date: Tue, 11 Apr 2017 09:00:34 +0200 Subject: MIPS: mm: fixed mappings: correct initialisation From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> [ Upstream commit 71eb989ab5a110df8bcbb9609bacde73feacbedd ] fixrange_init operates at PMD-granularity and expects the addresses to be PMD-size aligned, but currently that might not be the case for PKMAP_BASE unless it is defined properly, so ensure a correct alignment is used before passing the address to fixrange_init. fixed mappings: only align the start address that is passed to fixrange_init rather than the value before adding the size, as we may end up with uninitialised upper part of the range. Signed-off-by: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15948/ Signed-off-by: Ralf Baechle <ralf(a)linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/mm/pgtable-32.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/mips/mm/pgtable-32.c +++ b/arch/mips/mm/pgtable-32.c @@ -51,15 +51,15 @@ void __init pagetable_init(void) /* * Fixed mappings: */ - vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; - fixrange_init(vaddr, vaddr + FIXADDR_SIZE, pgd_base); + vaddr = __fix_to_virt(__end_of_fixed_addresses - 1); + fixrange_init(vaddr & PMD_MASK, vaddr + FIXADDR_SIZE, pgd_base); #ifdef CONFIG_HIGHMEM /* * Permanent kmaps: */ vaddr = PKMAP_BASE; - fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); + fixrange_init(vaddr & PMD_MASK, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); pgd = swapper_pg_dir + __pgd_offset(vaddr); pud = pud_offset(pgd, vaddr); Patches currently in stable-queue which might be from marcin.nowakowski(a)imgtec.com are queue-4.4/mips-mm-fixed-mappings-correct-initialisation.patch queue-4.4/mips-mm-adjust-pkmap-location.patch queue-4.4/mips-kprobes-flush_insn_slot-should-flush-only-if-probe-initialised.patch

7 years, 6 months

1
0
0 0

Patch "MIPS: mm: adjust PKMAP location" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: mm: adjust PKMAP location to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-mm-adjust-pkmap-location.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Date: Tue, 11 Apr 2017 09:00:36 +0200 Subject: MIPS: mm: adjust PKMAP location From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> [ Upstream commit c56e7a4c3e77f6fbd9b55c06c14eda65aae58958 ] Space reserved for PKMap should span from PKMAP_BASE to FIXADDR_START. For large page sizes this is not the case as eg. for 64k pages the range currently defined is from 0xfe000000 to 0x102000000(!!) which obviously isn't right. Remove the hardcoded location and set the BASE address as an offset from FIXADDR_START. Since all PKMAP ptes have to be placed in a contiguous memory, ensure that this is the case by placing them all in a single page. This is achieved by aligning the end address to pkmap pages count pages. Signed-off-by: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15950/ Signed-off-by: Ralf Baechle <ralf(a)linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/include/asm/pgtable-32.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -18,6 +18,10 @@ #include <asm-generic/pgtable-nopmd.h> +#ifdef CONFIG_HIGHMEM +#include <asm/highmem.h> +#endif + extern int temp_tlb_entry; /* @@ -61,7 +65,8 @@ extern int add_temporary_entry(unsigned #define VMALLOC_START MAP_BASE -#define PKMAP_BASE (0xfe000000UL) +#define PKMAP_END ((FIXADDR_START) & ~((LAST_PKMAP << PAGE_SHIFT)-1)) +#define PKMAP_BASE (PKMAP_END - PAGE_SIZE * LAST_PKMAP) #ifdef CONFIG_HIGHMEM # define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE) Patches currently in stable-queue which might be from marcin.nowakowski(a)imgtec.com are queue-4.4/mips-mm-fixed-mappings-correct-initialisation.patch queue-4.4/mips-mm-adjust-pkmap-location.patch queue-4.4/mips-kprobes-flush_insn_slot-should-flush-only-if-probe-initialised.patch

7 years, 6 months

1
0
0 0

Patch "MIPS: kprobes: flush_insn_slot should flush only if probe initialised" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: kprobes: flush_insn_slot should flush only if probe initialised to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-kprobes-flush_insn_slot-should-flush-only-if-probe-initialised.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 10:31:53 CEST 2018 From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Date: Thu, 8 Jun 2017 15:20:32 +0200 Subject: MIPS: kprobes: flush_insn_slot should flush only if probe initialised From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> [ Upstream commit 698b851073ddf5a894910d63ca04605e0473414e ] When ftrace is used with kprobes, it is possible for a kprobe to contain an invalid location (ie. only initialised to 0 and not to a specific location in the code). Trying to perform a cache flush on such location leads to a crash r4k_flush_icache_range(). Fixes: c1bf207d6ee1 ("MIPS: kprobe: Add support.") Signed-off-by: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16296/ Signed-off-by: Ralf Baechle <ralf(a)linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/include/asm/kprobes.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/arch/mips/include/asm/kprobes.h +++ b/arch/mips/include/asm/kprobes.h @@ -40,7 +40,8 @@ typedef union mips_instruction kprobe_op #define flush_insn_slot(p) \ do { \ - flush_icache_range((unsigned long)p->addr, \ + if (p->addr) \ + flush_icache_range((unsigned long)p->addr, \ (unsigned long)p->addr + \ (MAX_INSN_SIZE * sizeof(kprobe_opcode_t))); \ } while (0) Patches currently in stable-queue which might be from marcin.nowakowski(a)imgtec.com are queue-4.4/mips-mm-fixed-mappings-correct-initialisation.patch queue-4.4/mips-mm-adjust-pkmap-location.patch queue-4.4/mips-kprobes-flush_insn_slot-should-flush-only-if-probe-initialised.patch

7 years, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror