- Linux-stable-mirror - lists.linaro.org

[PATCH 4.14 v3 1/2] scsi: mpt3sas: fix oops in error handlers after shutdown/unload

by Mauricio Faria de Oliveira

commit 9ff549ffb4fb4cc9a4b24d1de9dc3e68287797c4 upstream. This patch adds checks for 'ioc->remove_host' in the SCSI error handlers, so not to access pointers/resources potentially freed in the PCI shutdown/module unload path. The error handlers may be invoked after shutdown/unload, depending on other components. This problem was observed with kexec on a system with a mpt3sas based adapter and an infiniband adapter which takes long enough to shutdown: The mpt3sas driver finished shutting down / disabled interrupt handling, thus some commands have not finished and timed out. Since the system was still running (waiting for the infiniband adapter to shutdown), the scsi error handler for task abort of mpt3sas was invoked, and hit an oops -- either in scsih_abort() because 'ioc->scsi_lookup' was NULL without commit dbec4c9040ed ("scsi: mpt3sas: lockless command submission"), or later up in scsih_host_reset() (with or without that commit), because it eventually called mpt3sas_base_get_iocstate(). After the above commit, the oops in scsih_abort() does not occur anymore (_scsih_scsi_lookup_find_by_scmd() is no longer called), but that commit is too big and out of the scope of linux-stable, where this patch might help, so still go for the changes. Also, this might help to prevent similar errors in the future, in case code changes and possibly tries to access freed stuff. Note the fix in scsih_host_reset() is still important anyway. Signed-off-by: Mauricio Faria de Oliveira <mauricfo(a)linux.vnet.ibm.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> --- v3: fix domain in email addresses, rebase on top of 4.14.29. v2: fix line number in hunk 1 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 33ff691..61a780f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -2471,7 +2471,8 @@ int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, _scsih_tm_display_info(ioc, scmd); sas_device_priv_data = scmd->device->hostdata; - if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + if (!sas_device_priv_data || !sas_device_priv_data->sas_target || + ioc->remove_host) { sdev_printk(KERN_INFO, scmd->device, "device been deleted! scmd(%p)\n", scmd); scmd->result = DID_NO_CONNECT << 16; @@ -2533,7 +2534,8 @@ int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, _scsih_tm_display_info(ioc, scmd); sas_device_priv_data = scmd->device->hostdata; - if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + if (!sas_device_priv_data || !sas_device_priv_data->sas_target || + ioc->remove_host) { sdev_printk(KERN_INFO, scmd->device, "device been deleted! scmd(%p)\n", scmd); scmd->result = DID_NO_CONNECT << 16; @@ -2595,7 +2597,8 @@ int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, _scsih_tm_display_info(ioc, scmd); sas_device_priv_data = scmd->device->hostdata; - if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { + if (!sas_device_priv_data || !sas_device_priv_data->sas_target || + ioc->remove_host) { starget_printk(KERN_INFO, starget, "target been deleted! scmd(%p)\n", scmd); scmd->result = DID_NO_CONNECT << 16; @@ -2652,7 +2655,7 @@ int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, ioc->name, scmd); scsi_print_command(scmd); - if (ioc->is_driver_loading) { + if (ioc->is_driver_loading || ioc->remove_host) { pr_info(MPT3SAS_FMT "Blocking the host reset\n", ioc->name); r = FAILED; -- 1.8.3.1

7 years, 5 months

1
1
0 0

[PATCH 3/7] ext4: shutdown should not prevent get_write_access

by Theodore Ts'o

The ext4 forced shutdown flag needs to prevent new handles from being started, but it needs to allow existing handles to complete. So the forced shutdown flag should not force ext4_journal_get_write_access to fail. Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Cc: stable(a)vger.kernel.org --- fs/ext4/ext4_jbd2.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c index 2d593201cf7a..7c70b08d104c 100644 --- a/fs/ext4/ext4_jbd2.c +++ b/fs/ext4/ext4_jbd2.c @@ -166,13 +166,6 @@ int __ext4_journal_get_write_access(const char *where, unsigned int line, might_sleep(); if (ext4_handle_valid(handle)) { - struct super_block *sb; - - sb = handle->h_transaction->t_journal->j_private; - if (unlikely(ext4_forced_shutdown(EXT4_SB(sb)))) { - jbd2_journal_abort_handle(handle); - return -EIO; - } err = jbd2_journal_get_write_access(handle, bh); if (err) ext4_journal_abort_handle(where, line, __func__, bh, -- 2.16.1.72.g5be1f00a9a

7 years, 5 months

3
2
0 0

[PATCH 7/7] ext4: don't update checksum of new initialized bitmaps

by Theodore Ts'o

When reading the inode or block allocation bitmap, if the bitmap needs to be initialized, do not update the checksum in the block group descriptor. That's because we're not set up to journal those changes. Instead, just set the verified bit on the bitmap block, so that it's not necessary to validate the checksum. When a block or inode allocation actually happens, at that point the checksum will be calculated, and update of the bg descriptor block will be properly journalled. Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Cc: stable(a)vger.kernel.org --- fs/ext4/balloc.c | 3 +-- fs/ext4/ialloc.c | 47 +++-------------------------------------------- 2 files changed, 4 insertions(+), 46 deletions(-) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index f9b3e0a83526..f82c4966f4ce 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -243,8 +243,6 @@ static int ext4_init_block_bitmap(struct super_block *sb, */ ext4_mark_bitmap_end(num_clusters_in_group(sb, block_group), sb->s_blocksize * 8, bh->b_data); - ext4_block_bitmap_csum_set(sb, block_group, gdp, bh); - ext4_group_desc_csum_set(sb, block_group, gdp); return 0; } @@ -448,6 +446,7 @@ ext4_read_block_bitmap_nowait(struct super_block *sb, ext4_group_t block_group) err = ext4_init_block_bitmap(sb, bh, block_group, desc); set_bitmap_uptodate(bh); set_buffer_uptodate(bh); + set_buffer_verified(bh); ext4_unlock_group(sb, block_group); unlock_buffer(bh); if (err) { diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 7830d28df331..3fa93665b4a3 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -66,44 +66,6 @@ void ext4_mark_bitmap_end(int start_bit, int end_bit, char *bitmap) memset(bitmap + (i >> 3), 0xff, (end_bit - i) >> 3); } -/* Initializes an uninitialized inode bitmap */ -static int ext4_init_inode_bitmap(struct super_block *sb, - struct buffer_head *bh, - ext4_group_t block_group, - struct ext4_group_desc *gdp) -{ - struct ext4_group_info *grp; - struct ext4_sb_info *sbi = EXT4_SB(sb); - J_ASSERT_BH(bh, buffer_locked(bh)); - - /* If checksum is bad mark all blocks and inodes use to prevent - * allocation, essentially implementing a per-group read-only flag. */ - if (!ext4_group_desc_csum_verify(sb, block_group, gdp)) { - grp = ext4_get_group_info(sb, block_group); - if (!EXT4_MB_GRP_BBITMAP_CORRUPT(grp)) - percpu_counter_sub(&sbi->s_freeclusters_counter, - grp->bb_free); - set_bit(EXT4_GROUP_INFO_BBITMAP_CORRUPT_BIT, &grp->bb_state); - if (!EXT4_MB_GRP_IBITMAP_CORRUPT(grp)) { - int count; - count = ext4_free_inodes_count(sb, gdp); - percpu_counter_sub(&sbi->s_freeinodes_counter, - count); - } - set_bit(EXT4_GROUP_INFO_IBITMAP_CORRUPT_BIT, &grp->bb_state); - return -EFSBADCRC; - } - - memset(bh->b_data, 0, (EXT4_INODES_PER_GROUP(sb) + 7) / 8); - ext4_mark_bitmap_end(EXT4_INODES_PER_GROUP(sb), sb->s_blocksize * 8, - bh->b_data); - ext4_inode_bitmap_csum_set(sb, block_group, gdp, bh, - EXT4_INODES_PER_GROUP(sb) / 8); - ext4_group_desc_csum_set(sb, block_group, gdp); - - return 0; -} - void ext4_end_bitmap_read(struct buffer_head *bh, int uptodate) { if (uptodate) { @@ -187,17 +149,14 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group) ext4_lock_group(sb, block_group); if (desc->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)) { - err = ext4_init_inode_bitmap(sb, bh, block_group, desc); + memset(bh->b_data, 0, (EXT4_INODES_PER_GROUP(sb) + 7) / 8); + ext4_mark_bitmap_end(EXT4_INODES_PER_GROUP(sb), + sb->s_blocksize * 8, bh->b_data); set_bitmap_uptodate(bh); set_buffer_uptodate(bh); set_buffer_verified(bh); ext4_unlock_group(sb, block_group); unlock_buffer(bh); - if (err) { - ext4_error(sb, "Failed to init inode bitmap for group " - "%u: %d", block_group, err); - goto out; - } return bh; } ext4_unlock_group(sb, block_group); -- 2.16.1.72.g5be1f00a9a

7 years, 5 months

3
2
0 0

Patch "oom: improve oom disable handling" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled oom: improve oom disable handling to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: oom-improve-oom-disable-handling.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Michal Hocko <mhocko(a)suse.com> Date: Wed, 3 May 2017 14:54:57 -0700 Subject: oom: improve oom disable handling From: Michal Hocko <mhocko(a)suse.com> [ Upstream commit d75da004c708c9fca7b53f7da293a295522414d9 ] Tetsuo has reported that sysrq triggered OOM killer will print a misleading information when no tasks are selected: sysrq: SysRq : Manual OOM execution Out of memory: Kill process 4468 ((agetty)) score 0 or sacrifice child Killed process 4468 ((agetty)) total-vm:43704kB, anon-rss:1760kB, file-rss:0kB, shmem-rss:0kB sysrq: SysRq : Manual OOM execution Out of memory: Kill process 4469 (systemd-cgroups) score 0 or sacrifice child Killed process 4469 (systemd-cgroups) total-vm:10704kB, anon-rss:120kB, file-rss:0kB, shmem-rss:0kB sysrq: SysRq : Manual OOM execution sysrq: OOM request ignored because killer is disabled sysrq: SysRq : Manual OOM execution sysrq: OOM request ignored because killer is disabled sysrq: SysRq : Manual OOM execution sysrq: OOM request ignored because killer is disabled The real reason is that there are no eligible tasks for the OOM killer to select but since commit 7c5f64f84483 ("mm: oom: deduplicate victim selection code for memcg and global oom") the semantic of out_of_memory has changed without updating moom_callback. This patch updates moom_callback to tell that no task was eligible which is the case for both oom killer disabled and no eligible tasks. In order to help distinguish first case from the second add printk to both oom_killer_{enable,disable}. This information is useful on its own because it might help debugging potential memory allocation failures. Fixes: 7c5f64f84483 ("mm: oom: deduplicate victim selection code for memcg and global oom") Link: http://lkml.kernel.org/r/20170404134705.6361-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko(a)suse.com> Reported-by: Tetsuo Handa <penguin-kernel(a)I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/sysrq.c | 2 +- mm/oom_kill.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -375,7 +375,7 @@ static void moom_callback(struct work_st mutex_lock(&oom_lock); if (!out_of_memory(&oc)) - pr_info("OOM request ignored because killer is disabled\n"); + pr_info("OOM request ignored. No task eligible\n"); mutex_unlock(&oom_lock); } --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -706,6 +706,7 @@ void exit_oom_victim(void) void oom_killer_enable(void) { oom_killer_disabled = false; + pr_info("OOM killer enabled.\n"); } /** @@ -742,6 +743,7 @@ bool oom_killer_disable(signed long time oom_killer_enable(); return false; } + pr_info("OOM killer disabled.\n"); return true; } Patches currently in stable-queue which might be from mhocko(a)suse.com are queue-4.9/mm-fix-check-for-reclaimable-pages-in-pf_memalloc-reclaim-throttling.patch queue-4.9/oom-improve-oom-disable-handling.patch

7 years, 5 months

3
2
0 0

[PATCH 3/3] cfi_cmdset_0002: Do not allow read/write to suspend erase block.

by Joakim Tjernlund

Currently it is possible to read and/or write to suspend EB's. Writing /dev/mtdX or /dev/mtdblockX from several processes may break the flash state machine. Taken from cfi_cmdset_0001 driver. Signed-off-by: Joakim Tjernlund <joakim.tjernlund(a)infinera.com> Cc: <stable(a)vger.kernel.org> --- drivers/mtd/chips/cfi_cmdset_0002.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 56aa6b75213d..d524a64ed754 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -816,9 +816,10 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr (mode == FL_WRITING && (cfip->EraseSuspend & 0x2)))) goto sleep; - /* We could check to see if we're trying to access the sector - * that is currently being erased. However, no user will try - * anything like that so we just wait for the timeout. */ + /* Do not allow suspend iff read/write to EB address */ + if ((adr & chip->in_progress_block_mask) == + chip->in_progress_block_addr) + goto sleep; /* Erase suspend */ /* It's harmless to issue the Erase-Suspend and Erase-Resume @@ -2267,6 +2268,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) chip->state = FL_ERASING; chip->erase_suspended = 0; chip->in_progress_block_addr = adr; + chip->in_progress_block_mask = ~(map->size - 1); INVALIDATE_CACHE_UDELAY(map, chip, adr, map->size, @@ -2356,6 +2358,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, chip->state = FL_ERASING; chip->erase_suspended = 0; chip->in_progress_block_addr = adr; + chip->in_progress_block_mask = ~(len - 1); INVALIDATE_CACHE_UDELAY(map, chip, adr, len, -- 2.13.6

7 years, 5 months

3
2
0 0

Patch "x86: i8259: export legacy_pic symbol" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86: i8259: export legacy_pic symbol to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-i8259-export-legacy_pic-symbol.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Hans de Goede <hdegoede(a)redhat.com> Date: Sat, 8 Apr 2017 19:54:20 +0200 Subject: x86: i8259: export legacy_pic symbol From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 7ee06cb2f840a96be46233181ed4557901a74385 ] The classic PC rtc-coms driver has a workaround for broken ACPI device nodes for it which lack an irq resource. This workaround used to unconditionally hardcode the irq to 8 in these cases. This was causing irq conflict problems on systems without a legacy-pic so a recent patch added an if (nr_legacy_irqs()) guard to the workaround to avoid this irq conflict. nr_legacy_irqs() uses the legacy_pic symbol under the hood causing an undefined symbol error if the rtc-cmos code is build as a module. This commit exports the legacy_pic symbol to fix this. Cc: rtc-linux(a)googlegroups.com Cc: alexandre.belloni(a)free-electrons.com Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/i8259.c | 1 + 1 file changed, 1 insertion(+) --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -405,6 +405,7 @@ struct legacy_pic default_legacy_pic = { }; struct legacy_pic *legacy_pic = &default_legacy_pic; +EXPORT_SYMBOL(legacy_pic); static int __init i8259A_init_ops(void) { Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-3.18/genirq-use-irqd_get_trigger_type-to-compare-the-trigger-type-for-shared-irqs.patch queue-3.18/x86-i8259-export-legacy_pic-symbol.patch

7 years, 5 months

1
0
0 0

Patch "wan: pc300too: abort path on failure" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled wan: pc300too: abort path on failure to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: wan-pc300too-abort-path-on-failure.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Pan Bian <bianpan2016(a)163.com> Date: Sun, 23 Apr 2017 17:38:35 +0800 Subject: wan: pc300too: abort path on failure From: Pan Bian <bianpan2016(a)163.com> [ Upstream commit 2a39e7aa8a98f777f0732ca7125b6c9668791760 ] In function pc300_pci_init_one(), on the ioremap error path, function pc300_pci_remove_one() is called to free the allocated memory. However, the path is not terminated, and the freed memory will be used later, resulting in use-after-free bugs. This path fixes the bug. Signed-off-by: Pan Bian <bianpan2016(a)163.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wan/pc300too.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/net/wan/pc300too.c +++ b/drivers/net/wan/pc300too.c @@ -347,6 +347,7 @@ static int pc300_pci_init_one(struct pci card->rambase == NULL) { pr_err("ioremap() failed\n"); pc300_pci_remove_one(pdev); + return -ENOMEM; } /* PLX PCI 9050 workaround for local configuration register read bug */ Patches currently in stable-queue which might be from bianpan2016(a)163.com are queue-3.18/rndis_wlan-add-return-value-validation.patch queue-3.18/qlcnic-fix-unchecked-return-value.patch queue-3.18/wan-pc300too-abort-path-on-failure.patch

7 years, 5 months

1
0
0 0

Patch "vgacon: Set VGA struct resource types" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vgacon: Set VGA struct resource types to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vgacon-set-vga-struct-resource-types.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Bjorn Helgaas <bhelgaas(a)google.com> Date: Fri, 1 Dec 2017 11:06:39 -0600 Subject: vgacon: Set VGA struct resource types From: Bjorn Helgaas <bhelgaas(a)google.com> [ Upstream commit c82084117f79bcae085e40da526253736a247120 ] Set the resource type when we reserve VGA-related I/O port resources. The resource code doesn't actually look at the type, so it inserts resources without a type in the tree correctly even without this change. But if we ever print a resource without a type, it looks like this: vga+ [??? 0x000003c0-0x000003df flags 0x0] Setting the type means it will be printed correctly as: vga+ [io 0x000003c0-0x000003df] Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/alpha/kernel/console.c | 1 + drivers/video/console/vgacon.c | 34 ++++++++++++++++++++++++++-------- 2 files changed, 27 insertions(+), 8 deletions(-) --- a/arch/alpha/kernel/console.c +++ b/arch/alpha/kernel/console.c @@ -20,6 +20,7 @@ struct pci_controller *pci_vga_hose; static struct resource alpha_vga = { .name = "alpha-vga+", + .flags = IORESOURCE_IO, .start = 0x3C0, .end = 0x3DF }; --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -409,7 +409,10 @@ static const char *vgacon_startup(void) vga_video_port_val = VGA_CRT_DM; if ((screen_info.orig_video_ega_bx & 0xff) != 0x10) { static struct resource ega_console_resource = - { .name = "ega", .start = 0x3B0, .end = 0x3BF }; + { .name = "ega", + .flags = IORESOURCE_IO, + .start = 0x3B0, + .end = 0x3BF }; vga_video_type = VIDEO_TYPE_EGAM; vga_vram_size = 0x8000; display_desc = "EGA+"; @@ -417,9 +420,15 @@ static const char *vgacon_startup(void) &ega_console_resource); } else { static struct resource mda1_console_resource = - { .name = "mda", .start = 0x3B0, .end = 0x3BB }; + { .name = "mda", + .flags = IORESOURCE_IO, + .start = 0x3B0, + .end = 0x3BB }; static struct resource mda2_console_resource = - { .name = "mda", .start = 0x3BF, .end = 0x3BF }; + { .name = "mda", + .flags = IORESOURCE_IO, + .start = 0x3BF, + .end = 0x3BF }; vga_video_type = VIDEO_TYPE_MDA; vga_vram_size = 0x2000; display_desc = "*MDA"; @@ -441,15 +450,21 @@ static const char *vgacon_startup(void) vga_vram_size = 0x8000; if (!screen_info.orig_video_isVGA) { - static struct resource ega_console_resource - = { .name = "ega", .start = 0x3C0, .end = 0x3DF }; + static struct resource ega_console_resource = + { .name = "ega", + .flags = IORESOURCE_IO, + .start = 0x3C0, + .end = 0x3DF }; vga_video_type = VIDEO_TYPE_EGAC; display_desc = "EGA"; request_resource(&ioport_resource, &ega_console_resource); } else { - static struct resource vga_console_resource - = { .name = "vga+", .start = 0x3C0, .end = 0x3DF }; + static struct resource vga_console_resource = + { .name = "vga+", + .flags = IORESOURCE_IO, + .start = 0x3C0, + .end = 0x3DF }; vga_video_type = VIDEO_TYPE_VGAC; display_desc = "VGA+"; request_resource(&ioport_resource, @@ -493,7 +508,10 @@ static const char *vgacon_startup(void) } } else { static struct resource cga_console_resource = - { .name = "cga", .start = 0x3D4, .end = 0x3D5 }; + { .name = "cga", + .flags = IORESOURCE_IO, + .start = 0x3D4, + .end = 0x3D5 }; vga_video_type = VIDEO_TYPE_CGA; vga_vram_size = 0x2000; display_desc = "*CGA"; Patches currently in stable-queue which might be from bhelgaas(a)google.com are queue-3.18/arm-dra7-clockdomain-change-the-clktrctrl-of-cm_pcie_clkstctrl-to-sw_wkup.patch queue-3.18/vgacon-set-vga-struct-resource-types.patch

7 years, 5 months

1
0
0 0

Patch "video: fbdev: udlfb: Fix buffer on stack" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video: fbdev: udlfb: Fix buffer on stack to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-fbdev-udlfb-fix-buffer-on-stack.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Maksim Salau <maksim.salau(a)gmail.com> Date: Tue, 2 May 2017 13:47:53 +0200 Subject: video: fbdev: udlfb: Fix buffer on stack From: Maksim Salau <maksim.salau(a)gmail.com> [ Upstream commit 45f580c42e5c125d55dbd8099750a1998de3d917 ] Allocate buffers on HEAP instead of STACK for local array that is to be sent using usb_control_msg(). Signed-off-by: Maksim Salau <maksim.salau(a)gmail.com> Cc: Bernie Thompson <bernie(a)plugable.com> Cc: Geert Uytterhoeven <geert(a)linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/udlfb.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -1490,15 +1490,25 @@ static struct device_attribute fb_device static int dlfb_select_std_channel(struct dlfb_data *dev) { int ret; - u8 set_def_chn[] = { 0x57, 0xCD, 0xDC, 0xA7, + void *buf; + static const u8 set_def_chn[] = { + 0x57, 0xCD, 0xDC, 0xA7, 0x1C, 0x88, 0x5E, 0x15, 0x60, 0xFE, 0xC6, 0x97, 0x16, 0x3D, 0x47, 0xF2 }; + buf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL); + + if (!buf) + return -ENOMEM; + ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), NR_USB_REQUEST_CHANNEL, (USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0, - set_def_chn, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT); + buf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT); + + kfree(buf); + return ret; } Patches currently in stable-queue which might be from maksim.salau(a)gmail.com are queue-3.18/video-fbdev-udlfb-fix-buffer-on-stack.patch

7 years, 5 months

1
0
0 0

Patch "tcp: remove poll() flakes with FastOpen" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tcp: remove poll() flakes with FastOpen to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tcp-remove-poll-flakes-with-fastopen.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Eric Dumazet <edumazet(a)google.com> Date: Tue, 18 Apr 2017 09:45:52 -0700 Subject: tcp: remove poll() flakes with FastOpen From: Eric Dumazet <edumazet(a)google.com> [ Upstream commit 0f9fa831aecfc297b7b45d4f046759bcefcf87f0 ] When using TCP FastOpen for an active session, we send one wakeup event from tcp_finish_connect(), right before the data eventually contained in the received SYNACK is queued to sk->sk_receive_queue. This means that depending on machine load or luck, poll() users might receive POLLOUT events instead of POLLIN|POLLOUT To fix this, we need to move the call to sk->sk_state_change() after the (optional) call to tcp_rcv_fastopen_synack() Signed-off-by: Eric Dumazet <edumazet(a)google.com> Acked-by: Yuchung Cheng <ycheng(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/tcp_input.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5322,10 +5322,6 @@ void tcp_finish_connect(struct sock *sk, else tp->pred_flags = 0; - if (!sock_flag(sk, SOCK_DEAD)) { - sk->sk_state_change(sk); - sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT); - } } static bool tcp_rcv_fastopen_synack(struct sock *sk, struct sk_buff *synack, @@ -5380,6 +5376,7 @@ static int tcp_rcv_synsent_state_process struct tcp_sock *tp = tcp_sk(sk); struct tcp_fastopen_cookie foc = { .len = -1 }; int saved_clamp = tp->rx_opt.mss_clamp; + bool fastopen_fail; tcp_parse_options(skb, &tp->rx_opt, 0, &foc); if (tp->rx_opt.saw_tstamp && tp->rx_opt.rcv_tsecr) @@ -5482,10 +5479,15 @@ static int tcp_rcv_synsent_state_process tcp_finish_connect(sk, skb); - if ((tp->syn_fastopen || tp->syn_data) && - tcp_rcv_fastopen_synack(sk, skb, &foc)) - return -1; + fastopen_fail = (tp->syn_fastopen || tp->syn_data) && + tcp_rcv_fastopen_synack(sk, skb, &foc); + if (!sock_flag(sk, SOCK_DEAD)) { + sk->sk_state_change(sk); + sk_wake_async(sk, SOCK_WAKE_IO, POLL_OUT); + } + if (fastopen_fail) + return -1; if (sk->sk_write_pending || icsk->icsk_accept_queue.rskq_defer_accept || icsk->icsk_ack.pingpong) { Patches currently in stable-queue which might be from edumazet(a)google.com are queue-3.18/tcp-remove-poll-flakes-with-fastopen.patch

7 years, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror