- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "phy: work around 'phys' references to usb-nop-xceiv devices" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled phy: work around 'phys' references to usb-nop-xceiv devices to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: phy-work-around-phys-references-to-usb-nop-xceiv-devices.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b7563e2796f8b23c98afcfea7363194227fa089d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd(a)arndb.de> Date: Fri, 12 Jan 2018 11:12:05 +0100 Subject: phy: work around 'phys' references to usb-nop-xceiv devices From: Arnd Bergmann <arnd(a)arndb.de> commit b7563e2796f8b23c98afcfea7363194227fa089d upstream. Stefan Wahren reports a problem with a warning fix that was merged for v4.15: we had lots of device nodes with a 'phys' property pointing to a device node that is not compliant with the binding documented in Documentation/devicetree/bindings/phy/phy-bindings.txt This generally works because USB HCD drivers that support both the generic phy subsystem and the older usb-phy subsystem ignore most errors from phy_get() and related calls and then use the usb-phy driver instead. However, it turns out that making the usb-nop-xceiv device compatible with the generic-phy binding changes the phy_get() return code from -EINVAL to -EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns -EPROBE_DEFER from its probe function rather than ignoring the failure, breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is enabled. The same code is used in the dwc3 driver and the usb_add_hcd() function, so a reasonable assumption would be that many other platforms are affected as well. I have reviewed all the related patches and concluded that "usb-nop-xceiv" is the only USB phy that is affected by the change, and since it is by far the most commonly referenced phy, all the other USB phy drivers appear to be used in ways that are are either safe in DT (they don't use the 'phys' property), or in the driver (they already ignore -EPROBE_DEFER from generic-phy when usb-phy is available). To work around the problem, this adds a special case to _of_phy_get() so we ignore any PHY node that is compatible with "usb-nop-xceiv", as we know that this can never load no matter how much we defer. In the future, we might implement a generic-phy driver for "usb-nop-xceiv" and then remove this workaround. Since we generally want older kernels to also want to work with the fixed devicetree files, it would be good to backport the patch into stable kernels as well (3.13+ are possibly affected), even though they don't contain any of the patches that may have caused regressions. Fixes: 014d6da6cb25 ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells Fixes: c5bbf358b790 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv Fixes: 44e5dced2ef6 arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv Fixes: f568f6f554b8 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv Fixes: d745d5f277bf ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv Fixes: 915fbe59cbf2 ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2 Link: https://patchwork.kernel.org/patch/10158145/ Cc: Felipe Balbi <balbi(a)kernel.org> Cc: Eric Anholt <eric(a)anholt.net> Tested-by: Stefan Wahren <stefan.wahren(a)i2se.com> Acked-by: Rob Herring <robh(a)kernel.org> Tested-by: Hans Verkuil <hans.verkuil(a)cisco.com> Acked-by: Kishon Vijay Abraham I <kishon(a)ti.com> Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/phy/phy-core.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -395,6 +395,10 @@ static struct phy *_of_phy_get(struct de if (ret) return ERR_PTR(-ENODEV); + /* This phy type handled by the usb-phy subsystem for now */ + if (of_device_is_compatible(args.np, "usb-nop-xceiv")) + return ERR_PTR(-ENODEV); + mutex_lock(&phy_provider_mutex); phy_provider = of_phy_provider_lookup(args.np); if (IS_ERR(phy_provider) || !try_module_get(phy_provider->owner)) { Patches currently in stable-queue which might be from arnd(a)arndb.de are queue-4.14/phy-work-around-phys-references-to-usb-nop-xceiv-devices.patch queue-4.14/arm-sunxi_defconfig-enable-cma.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "Input: twl6040-vibra - fix child-node lookup" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: twl6040-vibra - fix child-node lookup to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-twl6040-vibra-fix-child-node-lookup.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From dcaf12a8b0bbdbfcfa2be8dff2c4948d9844b4ad Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Mon, 8 Jan 2018 17:17:48 -0800 Subject: Input: twl6040-vibra - fix child-node lookup From: Johan Hovold <johan(a)kernel.org> commit dcaf12a8b0bbdbfcfa2be8dff2c4948d9844b4ad upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. Later sanity checks on node properties (which would likely be missing) should prevent this from causing much trouble however, especially as the original premature free of the parent node has already been fixed separately (but that "fix" was apparently never backported to stable). Fixes: e7ec014a47e4 ("Input: twl6040-vibra - update for device tree support") Fixes: c52c545ead97 ("Input: twl6040-vibra - fix DT node memory management") Signed-off-by: Johan Hovold <johan(a)kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Tested-by: H. Nikolaus Schaller <hns(a)goldelico.com> (on Pyra OMAP5 hardware) Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/misc/twl6040-vibra.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -248,8 +248,7 @@ static int twl6040_vibra_probe(struct pl int vddvibr_uV = 0; int error; - of_node_get(twl6040_core_dev->of_node); - twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node, + twl6040_core_node = of_get_child_by_name(twl6040_core_dev->of_node, "vibra"); if (!twl6040_core_node) { dev_err(&pdev->dev, "parent of node is missing?\n"); Patches currently in stable-queue which might be from johan(a)kernel.org are queue-4.14/input-twl4030-vibra-fix-sibling-node-lookup.patch queue-4.14/input-twl6040-vibra-fix-child-node-lookup.patch queue-4.14/input-88pm860x-ts-fix-child-node-lookup.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "libata: apply MAX_SEC_1024 to all LITEON EP1 series devices" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled libata: apply MAX_SEC_1024 to all LITEON EP1 series devices to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: libata-apply-max_sec_1024-to-all-liteon-ep1-series-devices.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From db5ff909798ef0099004ad50a0ff5fde92426fd1 Mon Sep 17 00:00:00 2001 From: Xinyu Lin <xinyu0123(a)gmail.com> Date: Sun, 17 Dec 2017 20:13:39 +0800 Subject: libata: apply MAX_SEC_1024 to all LITEON EP1 series devices From: Xinyu Lin <xinyu0123(a)gmail.com> commit db5ff909798ef0099004ad50a0ff5fde92426fd1 upstream. LITEON EP1 has the same timeout issues as CX1 series devices. Revert max_sectors to the value of 1024. Fixes: e0edc8c54646 ("libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices") Signed-off-by: Xinyu Lin <xinyu0123(a)gmail.com> Signed-off-by: Tejun Heo <tj(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4439,6 +4439,7 @@ static const struct ata_blacklist_entry * https://bugzilla.kernel.org/show_bug.cgi?id=121671 */ { "LITEON CX1-JB*-HP", NULL, ATA_HORKAGE_MAX_SEC_1024 }, + { "LITEON EP1-*", NULL, ATA_HORKAGE_MAX_SEC_1024 }, /* Devices we expect to fail diagnostics */ Patches currently in stable-queue which might be from xinyu0123(a)gmail.com are queue-4.14/libata-apply-max_sec_1024-to-all-liteon-ep1-series-devices.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "Input: twl4030-vibra - fix sibling-node lookup" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: twl4030-vibra - fix sibling-node lookup to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-twl4030-vibra-fix-sibling-node-lookup.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5b189201993ab03001a398de731045bfea90c689 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Mon, 8 Jan 2018 17:15:06 -0800 Subject: Input: twl4030-vibra - fix sibling-node lookup From: Johan Hovold <johan(a)kernel.org> commit 5b189201993ab03001a398de731045bfea90c689 upstream. A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while searching the whole device tree depth-first starting at the parent node. Fixes: 64b9e4d803b1 ("input: twl4030-vibra: Support for DT booted kernel") Fixes: e661d0a04462 ("Input: twl4030-vibra - fix ERROR: Bad of_node_put() warning") Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/misc/twl4030-vibra.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -178,12 +178,14 @@ static SIMPLE_DEV_PM_OPS(twl4030_vibra_p twl4030_vibra_suspend, twl4030_vibra_resume); static bool twl4030_vibra_check_coexist(struct twl4030_vibra_data *pdata, - struct device_node *node) + struct device_node *parent) { + struct device_node *node; + if (pdata && pdata->coexist) return true; - node = of_find_node_by_name(node, "codec"); + node = of_get_child_by_name(parent, "codec"); if (node) { of_node_put(node); return true; Patches currently in stable-queue which might be from johan(a)kernel.org are queue-4.14/input-twl4030-vibra-fix-sibling-node-lookup.patch queue-4.14/input-twl6040-vibra-fix-child-node-lookup.patch queue-4.14/input-88pm860x-ts-fix-child-node-lookup.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "Input: synaptics-rmi4 - prevent UAF reported by KASAN" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: synaptics-rmi4 - prevent UAF reported by KASAN to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-synaptics-rmi4-prevent-uaf-reported-by-kasan.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 55edde9fff1ae4114c893c572e641620c76c9c21 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers <nick.desaulniers(a)gmail.com> Date: Thu, 18 Jan 2018 11:36:41 -0800 Subject: Input: synaptics-rmi4 - prevent UAF reported by KASAN From: Nick Desaulniers <nick.desaulniers(a)gmail.com> commit 55edde9fff1ae4114c893c572e641620c76c9c21 upstream. KASAN found a UAF due to dangling pointer. As the report below says, rmi_f11_attention() accesses drvdata->attn_data.data, which was freed in rmi_irq_fn. [ 311.424062] BUG: KASAN: use-after-free in rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424067] Read of size 27 at addr ffff88041fd610db by task irq/131-i2c_hid/1162 [ 311.424075] CPU: 0 PID: 1162 Comm: irq/131-i2c_hid Not tainted 4.15.0-rc8+ #2 [ 311.424076] Hardware name: Razer Blade Stealth/Razer, BIOS 6.05 01/26/2017 [ 311.424078] Call Trace: [ 311.424086] dump_stack+0xae/0x12d [ 311.424090] ? _atomic_dec_and_lock+0x103/0x103 [ 311.424094] ? show_regs_print_info+0xa/0xa [ 311.424099] ? input_handle_event+0x10b/0x810 [ 311.424104] print_address_description+0x65/0x229 [ 311.424108] kasan_report.cold.5+0xa7/0x281 [ 311.424117] rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424123] ? memcpy+0x1f/0x50 [ 311.424132] ? rmi_f11_attention+0x526/0x5e0 [rmi_core] [ 311.424143] ? rmi_f11_probe+0x1e20/0x1e20 [rmi_core] [ 311.424153] ? rmi_process_interrupt_requests+0x220/0x2a0 [rmi_core] [ 311.424163] ? rmi_irq_fn+0x22c/0x270 [rmi_core] [ 311.424173] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core] [ 311.424177] ? free_irq+0xa0/0xa0 [ 311.424180] ? irq_finalize_oneshot.part.39+0xeb/0x180 [ 311.424190] ? rmi_process_interrupt_requests+0x2a0/0x2a0 [rmi_core] [ 311.424193] ? irq_thread_fn+0x3d/0x80 [ 311.424197] ? irq_finalize_oneshot.part.39+0x180/0x180 [ 311.424200] ? irq_thread+0x21d/0x290 [ 311.424203] ? irq_thread_check_affinity+0x170/0x170 [ 311.424207] ? remove_wait_queue+0x150/0x150 [ 311.424212] ? kasan_unpoison_shadow+0x30/0x40 [ 311.424214] ? __init_waitqueue_head+0xa0/0xd0 [ 311.424218] ? task_non_contending.cold.55+0x18/0x18 [ 311.424221] ? irq_forced_thread_fn+0xa0/0xa0 [ 311.424226] ? irq_thread_check_affinity+0x170/0x170 [ 311.424230] ? kthread+0x19e/0x1c0 [ 311.424233] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 311.424237] ? ret_from_fork+0x32/0x40 [ 311.424244] Allocated by task 899: [ 311.424249] kasan_kmalloc+0xbf/0xe0 [ 311.424252] __kmalloc_track_caller+0xd9/0x1f0 [ 311.424255] kmemdup+0x17/0x40 [ 311.424264] rmi_set_attn_data+0xa4/0x1b0 [rmi_core] [ 311.424269] rmi_raw_event+0x10b/0x1f0 [hid_rmi] [ 311.424278] hid_input_report+0x1a8/0x2c0 [hid] [ 311.424283] i2c_hid_irq+0x146/0x1d0 [i2c_hid] [ 311.424286] irq_thread_fn+0x3d/0x80 [ 311.424288] irq_thread+0x21d/0x290 [ 311.424291] kthread+0x19e/0x1c0 [ 311.424293] ret_from_fork+0x32/0x40 [ 311.424296] Freed by task 1162: [ 311.424300] kasan_slab_free+0x71/0xc0 [ 311.424303] kfree+0x90/0x190 [ 311.424311] rmi_irq_fn+0x1b2/0x270 [rmi_core] [ 311.424319] rmi_irq_fn+0x257/0x270 [rmi_core] [ 311.424322] irq_thread_fn+0x3d/0x80 [ 311.424324] irq_thread+0x21d/0x290 [ 311.424327] kthread+0x19e/0x1c0 [ 311.424330] ret_from_fork+0x32/0x40 [ 311.424334] The buggy address belongs to the object at ffff88041fd610c0 which belongs to the cache kmalloc-64 of size 64 [ 311.424340] The buggy address is located 27 bytes inside of 64-byte region [ffff88041fd610c0, ffff88041fd61100) [ 311.424344] The buggy address belongs to the page: [ 311.424348] page:ffffea00107f5840 count:1 mapcount:0 mapping: (null) index:0x0 [ 311.424353] flags: 0x17ffffc0000100(slab) [ 311.424358] raw: 0017ffffc0000100 0000000000000000 0000000000000000 00000001802a002a [ 311.424363] raw: dead000000000100 dead000000000200 ffff8804228036c0 0000000000000000 [ 311.424366] page dumped because: kasan: bad access detected [ 311.424369] Memory state around the buggy address: [ 311.424373] ffff88041fd60f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 311.424377] ffff88041fd61000: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb [ 311.424381] >ffff88041fd61080: fb fb fb fb fc fc fc fc fb fb fb fb fb fb fb fb [ 311.424384] ^ [ 311.424387] ffff88041fd61100: fc fc fc fc fb fb fb fb fb fb fb fb fc fc fc fc [ 311.424391] ffff88041fd61180: fb fb fb fb fb fb fb fb fc fc fc fc fb fb fb fb Signed-off-by: Nick Desaulniers <nick.desaulniers(a)gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/rmi4/rmi_driver.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/drivers/input/rmi4/rmi_driver.c +++ b/drivers/input/rmi4/rmi_driver.c @@ -230,8 +230,10 @@ static irqreturn_t rmi_irq_fn(int irq, v rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Failed to process interrupt request: %d\n", ret); - if (count) + if (count) { kfree(attn_data.data); + attn_data.data = NULL; + } if (!kfifo_is_empty(&drvdata->attn_fifo)) return rmi_irq_fn(irq, dev_id); Patches currently in stable-queue which might be from nick.desaulniers(a)gmail.com are queue-4.14/objtool-fix-clang-enum-conversion-warning.patch queue-4.14/input-synaptics-rmi4-prevent-uaf-reported-by-kasan.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "Input: ALPS - fix multi-touch decoding on SS4 plus touchpads" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: ALPS - fix multi-touch decoding on SS4 plus touchpads to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-alps-fix-multi-touch-decoding-on-ss4-plus-touchpads.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4d94e776bd29670f01befa27e12df784fa05fa2e Mon Sep 17 00:00:00 2001 From: Nir Perry <nirperry(a)gmail.com> Date: Thu, 11 Jan 2018 23:43:26 -0800 Subject: Input: ALPS - fix multi-touch decoding on SS4 plus touchpads From: Nir Perry <nirperry(a)gmail.com> commit 4d94e776bd29670f01befa27e12df784fa05fa2e upstream. The fix for handling two-finger scroll (i4a646580f793 - "Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad") introduced a minor "typo" that broke decoding of multi-touch events are decoded on some ALPS touchpads. For example, tapping with three-fingers can no longer be used to emulate middle-mouse-button (the kernel doesn't recognize this as the proper event, and doesn't report it correctly to userspace). This affects touchpads that use SS4 "plus" protocol variant, like those found on Dell E7270 & E7470 laptops (tested on E7270). First, probably the code in alps_decode_ss4_v2() for case SS4_PACKET_ID_MULTI used inconsistent indices to "f->mt[]". You can see 0 & 1 are used for the "if" part but 2 & 3 are used for the "else" part. Second, in the previous patch, new macros were introduced to decode X coordinates specific to the SS4 "plus" variant, but the macro to define the maximum X value wasn't changed accordingly. The macros to decode X values for "plus" variant are effectively shifted right by 1 bit, but the max wasn't shifted too. This causes the driver to incorrectly handle "no data" cases, which also interfered with how multi-touch was handled. Fixes: 4a646580f793 ("Input: ALPS - fix two-finger scroll breakage...") Signed-off-by: Nir Perry <nirperry(a)gmail.com> Reviewed-by: Masaki Ota <masaki.ota(a)jp.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/mouse/alps.c | 23 +++++++++++++---------- drivers/input/mouse/alps.h | 10 ++++++---- 2 files changed, 19 insertions(+), 14 deletions(-) --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -1250,29 +1250,32 @@ static int alps_decode_ss4_v2(struct alp case SS4_PACKET_ID_MULTI: if (priv->flags & ALPS_BUTTONPAD) { if (IS_SS4PLUS_DEV(priv->dev_id)) { - f->mt[0].x = SS4_PLUS_BTL_MF_X_V2(p, 0); - f->mt[1].x = SS4_PLUS_BTL_MF_X_V2(p, 1); + f->mt[2].x = SS4_PLUS_BTL_MF_X_V2(p, 0); + f->mt[3].x = SS4_PLUS_BTL_MF_X_V2(p, 1); + no_data_x = SS4_PLUS_MFPACKET_NO_AX_BL; } else { f->mt[2].x = SS4_BTL_MF_X_V2(p, 0); f->mt[3].x = SS4_BTL_MF_X_V2(p, 1); + no_data_x = SS4_MFPACKET_NO_AX_BL; } + no_data_y = SS4_MFPACKET_NO_AY_BL; f->mt[2].y = SS4_BTL_MF_Y_V2(p, 0); f->mt[3].y = SS4_BTL_MF_Y_V2(p, 1); - no_data_x = SS4_MFPACKET_NO_AX_BL; - no_data_y = SS4_MFPACKET_NO_AY_BL; } else { if (IS_SS4PLUS_DEV(priv->dev_id)) { - f->mt[0].x = SS4_PLUS_STD_MF_X_V2(p, 0); - f->mt[1].x = SS4_PLUS_STD_MF_X_V2(p, 1); + f->mt[2].x = SS4_PLUS_STD_MF_X_V2(p, 0); + f->mt[3].x = SS4_PLUS_STD_MF_X_V2(p, 1); + no_data_x = SS4_PLUS_MFPACKET_NO_AX; } else { - f->mt[0].x = SS4_STD_MF_X_V2(p, 0); - f->mt[1].x = SS4_STD_MF_X_V2(p, 1); + f->mt[2].x = SS4_STD_MF_X_V2(p, 0); + f->mt[3].x = SS4_STD_MF_X_V2(p, 1); + no_data_x = SS4_MFPACKET_NO_AX; } + no_data_y = SS4_MFPACKET_NO_AY; + f->mt[2].y = SS4_STD_MF_Y_V2(p, 0); f->mt[3].y = SS4_STD_MF_Y_V2(p, 1); - no_data_x = SS4_MFPACKET_NO_AX; - no_data_y = SS4_MFPACKET_NO_AY; } f->first_mp = 0; --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -141,10 +141,12 @@ enum SS4_PACKET_ID { #define SS4_TS_Z_V2(_b) (s8)(_b[4] & 0x7F) -#define SS4_MFPACKET_NO_AX 8160 /* X-Coordinate value */ -#define SS4_MFPACKET_NO_AY 4080 /* Y-Coordinate value */ -#define SS4_MFPACKET_NO_AX_BL 8176 /* Buttonless X-Coordinate value */ -#define SS4_MFPACKET_NO_AY_BL 4088 /* Buttonless Y-Coordinate value */ +#define SS4_MFPACKET_NO_AX 8160 /* X-Coordinate value */ +#define SS4_MFPACKET_NO_AY 4080 /* Y-Coordinate value */ +#define SS4_MFPACKET_NO_AX_BL 8176 /* Buttonless X-Coord value */ +#define SS4_MFPACKET_NO_AY_BL 4088 /* Buttonless Y-Coord value */ +#define SS4_PLUS_MFPACKET_NO_AX 4080 /* SS4 PLUS, X */ +#define SS4_PLUS_MFPACKET_NO_AX_BL 4088 /* Buttonless SS4 PLUS, X */ /* * enum V7_PACKET_ID - defines the packet type for V7 Patches currently in stable-queue which might be from nirperry(a)gmail.com are queue-4.14/input-alps-fix-multi-touch-decoding-on-ss4-plus-touchpads.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "Input: 88pm860x-ts - fix child-node lookup" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: 88pm860x-ts - fix child-node lookup to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-88pm860x-ts-fix-child-node-lookup.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 906bf7daa0618d0ef39f4872ca42218c29a3631f Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Mon, 8 Jan 2018 17:20:18 -0800 Subject: Input: 88pm860x-ts - fix child-node lookup From: Johan Hovold <johan(a)kernel.org> commit 906bf7daa0618d0ef39f4872ca42218c29a3631f upstream. Fix child node-lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Fixes: 2e57d56747e6 ("mfd: 88pm860x: Device tree support") Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/touchscreen/88pm860x-ts.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) --- a/drivers/input/touchscreen/88pm860x-ts.c +++ b/drivers/input/touchscreen/88pm860x-ts.c @@ -126,7 +126,7 @@ static int pm860x_touch_dt_init(struct p int data, n, ret; if (!np) return -ENODEV; - np = of_find_node_by_name(np, "touch"); + np = of_get_child_by_name(np, "touch"); if (!np) { dev_err(&pdev->dev, "Can't find touch node\n"); return -EINVAL; @@ -144,13 +144,13 @@ static int pm860x_touch_dt_init(struct p if (data) { ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data); if (ret < 0) - return -EINVAL; + goto err_put_node; } /* set tsi prebias time */ if (!of_property_read_u32(np, "marvell,88pm860x-tsi-prebias", &data)) { ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data); if (ret < 0) - return -EINVAL; + goto err_put_node; } /* set prebias & prechg time of pen detect */ data = 0; @@ -161,10 +161,18 @@ static int pm860x_touch_dt_init(struct p if (data) { ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data); if (ret < 0) - return -EINVAL; + goto err_put_node; } of_property_read_u32(np, "marvell,88pm860x-resistor-X", res_x); + + of_node_put(np); + return 0; + +err_put_node: + of_node_put(np); + + return -EINVAL; } #else #define pm860x_touch_dt_init(x, y, z) (-1) Patches currently in stable-queue which might be from johan(a)kernel.org are queue-4.14/input-twl4030-vibra-fix-sibling-node-lookup.patch queue-4.14/input-twl6040-vibra-fix-child-node-lookup.patch queue-4.14/input-88pm860x-ts-fix-child-node-lookup.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: i2c-core-smbus-prevent-stack-corruption-on-read-i2c_block_data.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 89c6efa61f5709327ecfa24bff18e57a4e80c7fa Mon Sep 17 00:00:00 2001 From: Jeremy Compostella <jeremy.compostella(a)intel.com> Date: Wed, 15 Nov 2017 12:31:44 -0700 Subject: i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA From: Jeremy Compostella <jeremy.compostella(a)intel.com> commit 89c6efa61f5709327ecfa24bff18e57a4e80c7fa upstream. On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes data out of the msgbuf1 array boundary. It is possible from a user application to run into that issue by calling the I2C_SMBUS ioctl with data.block[0] greater than I2C_SMBUS_BLOCK_MAX + 1. This patch makes the code compliant with Documentation/i2c/dev-interface by raising an error when the requested size is larger than 32 bytes. Call Trace: [<ffffffff8139f695>] dump_stack+0x67/0x92 [<ffffffff811802a4>] panic+0xc5/0x1eb [<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30 [<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20 [<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320 [<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0 [<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490 [<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60 [<ffffffff811f7869>] SyS_ioctl+0x79/0x90 [<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a Signed-off-by: Jeremy Compostella <jeremy.compostella(a)intel.com> Signed-off-by: Wolfram Sang <wsa(a)the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/i2c/i2c-core-smbus.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -396,16 +396,17 @@ static s32 i2c_smbus_xfer_emulated(struc the underlying bus driver */ break; case I2C_SMBUS_I2C_BLOCK_DATA: + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) { + dev_err(&adapter->dev, "Invalid block %s size %d\n", + read_write == I2C_SMBUS_READ ? "read" : "write", + data->block[0]); + return -EINVAL; + } + if (read_write == I2C_SMBUS_READ) { msg[1].len = data->block[0]; } else { msg[0].len = data->block[0] + 1; - if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) { - dev_err(&adapter->dev, - "Invalid block write size %d\n", - data->block[0]); - return -EINVAL; - } for (i = 1; i <= data->block[0]; i++) msgbuf0[i] = data->block[i]; } Patches currently in stable-queue which might be from jeremy.compostella(a)intel.com are queue-4.14/i2c-core-smbus-prevent-stack-corruption-on-read-i2c_block_data.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "drm/vmwgfx: fix memory corruption with legacy/sou connectors" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/vmwgfx: fix memory corruption with legacy/sou connectors to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-vmwgfx-fix-memory-corruption-with-legacy-sou-connectors.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8a510a5c75261ba0ec39155326982aa786541e29 Mon Sep 17 00:00:00 2001 From: Rob Clark <rclark(a)redhat.com> Date: Wed, 17 Jan 2018 10:16:20 -0500 Subject: drm/vmwgfx: fix memory corruption with legacy/sou connectors From: Rob Clark <rclark(a)redhat.com> commit 8a510a5c75261ba0ec39155326982aa786541e29 upstream. It looks like in all cases 'struct vmw_connector_state' is used. But only in stdu connectors, was atomic_{duplicate,destroy}_state() properly subclassed. Leading to writes beyond the end of the allocated connector state block and all sorts of fun memory corruption related crashes. Fixes: d7721ca71126 "drm/vmwgfx: Connector atomic state" Signed-off-by: Rob Clark <rclark(a)redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom(a)vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c | 4 ++-- drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c @@ -266,8 +266,8 @@ static const struct drm_connector_funcs .set_property = vmw_du_connector_set_property, .destroy = vmw_ldu_connector_destroy, .reset = vmw_du_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + .atomic_duplicate_state = vmw_du_connector_duplicate_state, + .atomic_destroy_state = vmw_du_connector_destroy_state, .atomic_set_property = vmw_du_connector_atomic_set_property, .atomic_get_property = vmw_du_connector_atomic_get_property, }; --- a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c @@ -420,8 +420,8 @@ static const struct drm_connector_funcs .set_property = vmw_du_connector_set_property, .destroy = vmw_sou_connector_destroy, .reset = vmw_du_connector_reset, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, + .atomic_duplicate_state = vmw_du_connector_duplicate_state, + .atomic_destroy_state = vmw_du_connector_destroy_state, .atomic_set_property = vmw_du_connector_atomic_set_property, .atomic_get_property = vmw_du_connector_atomic_get_property, }; Patches currently in stable-queue which might be from rclark(a)redhat.com are queue-4.14/drm-vmwgfx-fix-memory-corruption-with-legacy-sou-connectors.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "dm thin metadata: THIN_MAX_CONCURRENT_LOCKS should be 6" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dm thin metadata: THIN_MAX_CONCURRENT_LOCKS should be 6 to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dm-thin-metadata-thin_max_concurrent_locks-should-be-6.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 490ae017f54e55bde382d45ea24bddfb6d1a0aaf Mon Sep 17 00:00:00 2001 From: Dennis Yang <dennisyang(a)qnap.com> Date: Tue, 12 Dec 2017 18:21:40 +0800 Subject: dm thin metadata: THIN_MAX_CONCURRENT_LOCKS should be 6 From: Dennis Yang <dennisyang(a)qnap.com> commit 490ae017f54e55bde382d45ea24bddfb6d1a0aaf upstream. For btree removal, there is a corner case that a single thread could takes 6 locks which is more than THIN_MAX_CONCURRENT_LOCKS(5) and leads to deadlock. A btree removal might eventually call rebalance_children()->rebalance3() to rebalance entries of three neighbor child nodes when shadow_spine has already acquired two write locks. In rebalance3(), it tries to shadow and acquire the write locks of all three child nodes. However, shadowing a child node requires acquiring a read lock of the original child node and a write lock of the new block. Although the read lock will be released after block shadowing, shadowing the third child node in rebalance3() could still take the sixth lock. (2 write locks for shadow_spine + 2 write locks for the first two child nodes's shadow + 1 write lock for the last child node's shadow + 1 read lock for the last child node) Signed-off-by: Dennis Yang <dennisyang(a)qnap.com> Acked-by: Joe Thornber <thornber(a)redhat.com> Signed-off-by: Mike Snitzer <snitzer(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/dm-thin-metadata.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -80,10 +80,14 @@ #define SECTOR_TO_BLOCK_SHIFT 3 /* + * For btree insert: * 3 for btree insert + * 2 for btree lookup used within space map + * For btree remove: + * 2 for shadow spine + + * 4 for rebalance 3 child node */ -#define THIN_MAX_CONCURRENT_LOCKS 5 +#define THIN_MAX_CONCURRENT_LOCKS 6 /* This should be plenty */ #define SPACE_MAP_ROOT_SIZE 128 Patches currently in stable-queue which might be from dennisyang(a)qnap.com are queue-4.14/dm-thin-metadata-thin_max_concurrent_locks-should-be-6.patch

7 years, 1 month

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror