- Linux-stable-mirror - lists.linaro.org

patch "USB: usbdevfs: sanitize flags more" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: usbdevfs: sanitize flags more to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 7a68d9fb851012829c29e770621905529bd9490b Mon Sep 17 00:00:00 2001 From: Oliver Neukum <oneukum(a)suse.com> Date: Wed, 5 Sep 2018 12:07:02 +0200 Subject: USB: usbdevfs: sanitize flags more Requesting a ZERO_PACKET or not is sensible only for output. In the input direction the device decides. Likewise accepting short packets makes sense only for input. This allows operation with panic_on_warn without opening up a local DOS. Signed-off-by: Oliver Neukum <oneukum(a)suse.com> Reported-by: syzbot+843efa30c8821bd69f53(a)syzkaller.appspotmail.com Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/devio.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6ce77b33da61..263dd2f309fb 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1434,10 +1434,13 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb struct async *as = NULL; struct usb_ctrlrequest *dr = NULL; unsigned int u, totlen, isofrmlen; - int i, ret, is_in, num_sgs = 0, ifnum = -1; + int i, ret, num_sgs = 0, ifnum = -1; int number_of_packets = 0; unsigned int stream_id = 0; void *buf; + bool is_in; + bool allow_short = false; + bool allow_zero = false; unsigned long mask = USBDEVFS_URB_SHORT_NOT_OK | USBDEVFS_URB_BULK_CONTINUATION | USBDEVFS_URB_NO_FSBR | @@ -1471,6 +1474,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb u = 0; switch (uurb->type) { case USBDEVFS_URB_TYPE_CONTROL: + if (is_in) + allow_short = true; if (!usb_endpoint_xfer_control(&ep->desc)) return -EINVAL; /* min 8 byte setup packet */ @@ -1511,6 +1516,10 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb break; case USBDEVFS_URB_TYPE_BULK: + if (!is_in) + allow_zero = true; + else + allow_short = true; switch (usb_endpoint_type(&ep->desc)) { case USB_ENDPOINT_XFER_CONTROL: case USB_ENDPOINT_XFER_ISOC: @@ -1531,6 +1540,10 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb if (!usb_endpoint_xfer_int(&ep->desc)) return -EINVAL; interrupt_urb: + if (!is_in) + allow_zero = true; + else + allow_short = true; break; case USBDEVFS_URB_TYPE_ISO: @@ -1676,9 +1689,9 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb u = (is_in ? URB_DIR_IN : URB_DIR_OUT); if (uurb->flags & USBDEVFS_URB_ISO_ASAP) u |= URB_ISO_ASAP; - if (uurb->flags & USBDEVFS_URB_SHORT_NOT_OK && is_in) + if (allow_short && uurb->flags & USBDEVFS_URB_SHORT_NOT_OK) u |= URB_SHORT_NOT_OK; - if (uurb->flags & USBDEVFS_URB_ZERO_PACKET) + if (allow_zero && uurb->flags & USBDEVFS_URB_ZERO_PACKET) u |= URB_ZERO_PACKET; if (uurb->flags & USBDEVFS_URB_NO_INTERRUPT) u |= URB_NO_INTERRUPT; -- 2.19.0

7 years, 3 months

1
0
0 0

patch "Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From e871db8d78df1c411032cbb3acfdf8930509360e Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> Date: Tue, 11 Sep 2018 10:00:44 +0200 Subject: Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()" This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427. The bug the patch describes to, has been already fixed in commit 2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback") so need to this, revert it. Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/class/cdc-wdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 656d247819c9..bec581fb7c63 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -460,7 +460,7 @@ static int service_outstanding_interrupt(struct wdm_device *desc) set_bit(WDM_RESPONDING, &desc->flags); spin_unlock_irq(&desc->iuspin); - rv = usb_submit_urb(desc->response, GFP_ATOMIC); + rv = usb_submit_urb(desc->response, GFP_KERNEL); spin_lock_irq(&desc->iuspin); if (rv) { dev_err(&desc->intf->dev, -- 2.19.0

7 years, 3 months

1
0
0 0

v4.18.9 build: 0 failures 3 warnings (v4.18.9)

by Build bot for Mark Brown

Tree/Branch: v4.18.9 Git describe: v4.18.9 Commit: 86e014f514 Linux 4.18.9 Build Time: 123 min 24 sec Passed: 11 / 11 (100.00 %) Failed: 0 / 11 ( 0.00 %) Errors: 0 Warnings: 3 Section Mismatches: 0 ------------------------------------------------------------------------------- defconfigs with issues (other than build errors): 1 warnings 0 mismatches : arm64-allnoconfig 3 warnings 0 mismatches : arm64-allmodconfig 2 warnings 0 mismatches : arm-multi_v5_defconfig 2 warnings 0 mismatches : arm-multi_v7_defconfig 2 warnings 0 mismatches : arm-allmodconfig 1 warnings 0 mismatches : arm-allnoconfig 1 warnings 0 mismatches : arm-multi_v4t_defconfig 2 warnings 0 mismatches : arm64-defconfig ------------------------------------------------------------------------------- Warnings Summary: 3 8 <stdin>:1332:2: warning: #warning syscall io_pgetevents not implemented [-Wcpp] 5 <stdin>:1335:2: warning: #warning syscall rseq not implemented [-Wcpp] 1 ../drivers/isdn/hardware/eicon/message.c:5985:1: warning: the frame size of 2064 bytes is larger than 2048 bytes [-Wframe-larger-than=] =============================================================================== Detailed per-defconfig build reports below: ------------------------------------------------------------------------------- arm64-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: <stdin>:1335:2: warning: #warning syscall rseq not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-allmodconfig : PASS, 0 errors, 3 warnings, 0 section mismatches Warnings: <stdin>:1335:2: warning: #warning syscall rseq not implemented [-Wcpp] ../drivers/isdn/hardware/eicon/message.c:5985:1: warning: the frame size of 2064 bytes is larger than 2048 bytes [-Wframe-larger-than=] <stdin>:1335:2: warning: #warning syscall rseq not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v5_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1332:2: warning: #warning syscall io_pgetevents not implemented [-Wcpp] <stdin>:1332:2: warning: #warning syscall io_pgetevents not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v7_defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1332:2: warning: #warning syscall io_pgetevents not implemented [-Wcpp] <stdin>:1332:2: warning: #warning syscall io_pgetevents not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-allmodconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1332:2: warning: #warning syscall io_pgetevents not implemented [-Wcpp] <stdin>:1332:2: warning: #warning syscall io_pgetevents not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-allnoconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: <stdin>:1332:2: warning: #warning syscall io_pgetevents not implemented [-Wcpp] ------------------------------------------------------------------------------- arm-multi_v4t_defconfig : PASS, 0 errors, 1 warnings, 0 section mismatches Warnings: <stdin>:1332:2: warning: #warning syscall io_pgetevents not implemented [-Wcpp] ------------------------------------------------------------------------------- arm64-defconfig : PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: <stdin>:1335:2: warning: #warning syscall rseq not implemented [-Wcpp] <stdin>:1335:2: warning: #warning syscall rseq not implemented [-Wcpp] ------------------------------------------------------------------------------- Passed with no errors, warnings or mismatches: x86_64-allnoconfig x86_64-allmodconfig x86_64-defconfig

7 years, 3 months

1
0
0 0

[PATCHES] Networking

by David Miller

Please queue up the following networking bug fixes for v4.14.x and v4.18.x -stable, respectively. Thank you!

7 years, 3 months

2
1
0 0

Request for inclusion on linux-4.14.y

by Alakesh Haloi

Hello Greg, Can you please consider including the following patch in the stable linux-4.14.y branch? This is to fix a defect in the Hyper-V network driver (hv_netsvc) that triggers kernel null pointer dereference bug, while loading the driver. b19b46346f48("hv/netvsc: Fix NULL dereference at single queue mode fallback") Thanks Alakesh Haloi

7 years, 3 months

2
1
0 0

[PATCH] drm/amdgpu: add new polaris pci id

by Alex Deucher

Add new pci id. Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 14 ++++++++------ drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 1 + 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 693ec5ea4950..8816c697b205 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -367,12 +367,14 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, break; case CHIP_POLARIS10: if (type == CGS_UCODE_ID_SMU) { - if ((adev->pdev->device == 0x67df) && - ((adev->pdev->revision == 0xe0) || - (adev->pdev->revision == 0xe3) || - (adev->pdev->revision == 0xe4) || - (adev->pdev->revision == 0xe5) || - (adev->pdev->revision == 0xe7) || + if (((adev->pdev->device == 0x67df) && + ((adev->pdev->revision == 0xe0) || + (adev->pdev->revision == 0xe3) || + (adev->pdev->revision == 0xe4) || + (adev->pdev->revision == 0xe5) || + (adev->pdev->revision == 0xe7) || + (adev->pdev->revision == 0xef))) || + ((adev->pdev->device == 0x6fdf) && (adev->pdev->revision == 0xef))) { info->is_kicker = true; strcpy(fw_name, "amdgpu/polaris10_k_smc.bin"); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index ff10df4f50d3..b536808f62ec 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -837,6 +837,7 @@ static const struct pci_device_id pciidlist[] = { {0x1002, 0x67CA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, {0x1002, 0x67CC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, {0x1002, 0x67CF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, + {0x1002, 0x6FDF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS10}, /* Polaris12 */ {0x1002, 0x6980, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, {0x1002, 0x6981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_POLARIS12}, -- 2.13.6

7 years, 3 months

1
0
0 0

[PATCH AUTOSEL 3.18 1/4] thermal: of-thermal: disable passive polling when thermal zone is disabled

by Sasha Levin

From: Anson Huang <Anson.Huang(a)nxp.com> [ Upstream commit 152395fd03d4ce1e535a75cdbf58105e50587611 ] When thermal zone is in passive mode, disabling its mode from sysfs is NOT taking effect at all, it is still polling the temperature of the disabled thermal zone and handling all thermal trips, it makes user confused. The disabling operation should disable the thermal zone behavior completely, for both active and passive mode, this patch clears the passive_delay when thermal zone is disabled and restores it when it is enabled. Signed-off-by: Anson Huang <Anson.Huang(a)nxp.com> Signed-off-by: Eduardo Valentin <edubezval(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- drivers/thermal/of-thermal.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 62143ba31001..3aeb476c2894 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -209,10 +209,13 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz, mutex_lock(&tz->lock); - if (mode == THERMAL_DEVICE_ENABLED) + if (mode == THERMAL_DEVICE_ENABLED) { tz->polling_delay = data->polling_delay; - else + tz->passive_delay = data->passive_delay; + } else { tz->polling_delay = 0; + tz->passive_delay = 0; + } mutex_unlock(&tz->lock); -- 2.17.1

7 years, 3 months

1
3
0 0

[PATCH AUTOSEL 4.4 1/7] thermal: of-thermal: disable passive polling when thermal zone is disabled

by Sasha Levin

From: Anson Huang <Anson.Huang(a)nxp.com> [ Upstream commit 152395fd03d4ce1e535a75cdbf58105e50587611 ] When thermal zone is in passive mode, disabling its mode from sysfs is NOT taking effect at all, it is still polling the temperature of the disabled thermal zone and handling all thermal trips, it makes user confused. The disabling operation should disable the thermal zone behavior completely, for both active and passive mode, this patch clears the passive_delay when thermal zone is disabled and restores it when it is enabled. Signed-off-by: Anson Huang <Anson.Huang(a)nxp.com> Signed-off-by: Eduardo Valentin <edubezval(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- drivers/thermal/of-thermal.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index be4eedcb839a..236c4eb5cf78 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -284,10 +284,13 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz, mutex_lock(&tz->lock); - if (mode == THERMAL_DEVICE_ENABLED) + if (mode == THERMAL_DEVICE_ENABLED) { tz->polling_delay = data->polling_delay; - else + tz->passive_delay = data->passive_delay; + } else { tz->polling_delay = 0; + tz->passive_delay = 0; + } mutex_unlock(&tz->lock); -- 2.17.1

7 years, 3 months

1
6
0 0

[PATCH AUTOSEL 4.9 01/14] qed: Wait for ready indication before rereading the shmem

by Sasha Levin

From: Tomer Tayar <Tomer.Tayar(a)cavium.com> [ Upstream commit f00d25f3154b676fcea4502a25b94bd7f142ca74 ] The MFW might be reset and re-update its shared memory. Upon the detection of such a reset the driver rereads this memory, but it has to wait till the data is valid. This patch adds the missing wait for a data ready indication. Signed-off-by: Tomer Tayar <Tomer.Tayar(a)cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 50 +++++++++++++++++++---- 1 file changed, 41 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index eaa242df4131..a89385ba6b63 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -97,18 +97,57 @@ int qed_mcp_free(struct qed_hwfn *p_hwfn) return 0; } +/* Maximum of 1 sec to wait for the SHMEM ready indication */ +#define QED_MCP_SHMEM_RDY_MAX_RETRIES 20 +#define QED_MCP_SHMEM_RDY_ITER_MS 50 + static int qed_load_mcp_offsets(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) { struct qed_mcp_info *p_info = p_hwfn->mcp_info; + u8 cnt = QED_MCP_SHMEM_RDY_MAX_RETRIES; + u8 msec = QED_MCP_SHMEM_RDY_ITER_MS; u32 drv_mb_offsize, mfw_mb_offsize; u32 mcp_pf_id = MCP_PF_ID(p_hwfn); p_info->public_base = qed_rd(p_hwfn, p_ptt, MISC_REG_SHARED_MEM_ADDR); - if (!p_info->public_base) - return 0; + if (!p_info->public_base) { + DP_NOTICE(p_hwfn, + "The address of the MCP scratch-pad is not configured\n"); + return -EINVAL; + } p_info->public_base |= GRCBASE_MCP; + /* Get the MFW MB address and number of supported messages */ + mfw_mb_offsize = qed_rd(p_hwfn, p_ptt, + SECTION_OFFSIZE_ADDR(p_info->public_base, + PUBLIC_MFW_MB)); + p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id); + p_info->mfw_mb_length = (u16)qed_rd(p_hwfn, p_ptt, + p_info->mfw_mb_addr + + offsetof(struct public_mfw_mb, + sup_msgs)); + + /* The driver can notify that there was an MCP reset, and might read the + * SHMEM values before the MFW has completed initializing them. + * To avoid this, the "sup_msgs" field in the MFW mailbox is used as a + * data ready indication. + */ + while (!p_info->mfw_mb_length && --cnt) { + msleep(msec); + p_info->mfw_mb_length = + (u16)qed_rd(p_hwfn, p_ptt, + p_info->mfw_mb_addr + + offsetof(struct public_mfw_mb, sup_msgs)); + } + + if (!cnt) { + DP_NOTICE(p_hwfn, + "Failed to get the SHMEM ready notification after %d msec\n", + QED_MCP_SHMEM_RDY_MAX_RETRIES * msec); + return -EBUSY; + } + /* Calculate the driver and MFW mailbox address */ drv_mb_offsize = qed_rd(p_hwfn, p_ptt, SECTION_OFFSIZE_ADDR(p_info->public_base, @@ -118,13 +157,6 @@ static int qed_load_mcp_offsets(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) "drv_mb_offsiz = 0x%x, drv_mb_addr = 0x%x mcp_pf_id = 0x%x\n", drv_mb_offsize, p_info->drv_mb_addr, mcp_pf_id); - /* Set the MFW MB address */ - mfw_mb_offsize = qed_rd(p_hwfn, p_ptt, - SECTION_OFFSIZE_ADDR(p_info->public_base, - PUBLIC_MFW_MB)); - p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id); - p_info->mfw_mb_length = (u16)qed_rd(p_hwfn, p_ptt, p_info->mfw_mb_addr); - /* Get the current driver mailbox sequence before sending * the first command */ -- 2.17.1

7 years, 3 months

1
13
0 0

[PATCH AUTOSEL 4.14 01/25] qed: Wait for ready indication before rereading the shmem

by Sasha Levin

From: Tomer Tayar <Tomer.Tayar(a)cavium.com> [ Upstream commit f00d25f3154b676fcea4502a25b94bd7f142ca74 ] The MFW might be reset and re-update its shared memory. Upon the detection of such a reset the driver rereads this memory, but it has to wait till the data is valid. This patch adds the missing wait for a data ready indication. Signed-off-by: Tomer Tayar <Tomer.Tayar(a)cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- drivers/net/ethernet/qlogic/qed/qed_mcp.c | 50 +++++++++++++++++++---- 1 file changed, 41 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c index 3c469355f5a4..9348d367cfdf 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c @@ -182,18 +182,57 @@ int qed_mcp_free(struct qed_hwfn *p_hwfn) return 0; } +/* Maximum of 1 sec to wait for the SHMEM ready indication */ +#define QED_MCP_SHMEM_RDY_MAX_RETRIES 20 +#define QED_MCP_SHMEM_RDY_ITER_MS 50 + static int qed_load_mcp_offsets(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) { struct qed_mcp_info *p_info = p_hwfn->mcp_info; + u8 cnt = QED_MCP_SHMEM_RDY_MAX_RETRIES; + u8 msec = QED_MCP_SHMEM_RDY_ITER_MS; u32 drv_mb_offsize, mfw_mb_offsize; u32 mcp_pf_id = MCP_PF_ID(p_hwfn); p_info->public_base = qed_rd(p_hwfn, p_ptt, MISC_REG_SHARED_MEM_ADDR); - if (!p_info->public_base) - return 0; + if (!p_info->public_base) { + DP_NOTICE(p_hwfn, + "The address of the MCP scratch-pad is not configured\n"); + return -EINVAL; + } p_info->public_base |= GRCBASE_MCP; + /* Get the MFW MB address and number of supported messages */ + mfw_mb_offsize = qed_rd(p_hwfn, p_ptt, + SECTION_OFFSIZE_ADDR(p_info->public_base, + PUBLIC_MFW_MB)); + p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id); + p_info->mfw_mb_length = (u16)qed_rd(p_hwfn, p_ptt, + p_info->mfw_mb_addr + + offsetof(struct public_mfw_mb, + sup_msgs)); + + /* The driver can notify that there was an MCP reset, and might read the + * SHMEM values before the MFW has completed initializing them. + * To avoid this, the "sup_msgs" field in the MFW mailbox is used as a + * data ready indication. + */ + while (!p_info->mfw_mb_length && --cnt) { + msleep(msec); + p_info->mfw_mb_length = + (u16)qed_rd(p_hwfn, p_ptt, + p_info->mfw_mb_addr + + offsetof(struct public_mfw_mb, sup_msgs)); + } + + if (!cnt) { + DP_NOTICE(p_hwfn, + "Failed to get the SHMEM ready notification after %d msec\n", + QED_MCP_SHMEM_RDY_MAX_RETRIES * msec); + return -EBUSY; + } + /* Calculate the driver and MFW mailbox address */ drv_mb_offsize = qed_rd(p_hwfn, p_ptt, SECTION_OFFSIZE_ADDR(p_info->public_base, @@ -203,13 +242,6 @@ static int qed_load_mcp_offsets(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt) "drv_mb_offsiz = 0x%x, drv_mb_addr = 0x%x mcp_pf_id = 0x%x\n", drv_mb_offsize, p_info->drv_mb_addr, mcp_pf_id); - /* Set the MFW MB address */ - mfw_mb_offsize = qed_rd(p_hwfn, p_ptt, - SECTION_OFFSIZE_ADDR(p_info->public_base, - PUBLIC_MFW_MB)); - p_info->mfw_mb_addr = SECTION_ADDR(mfw_mb_offsize, mcp_pf_id); - p_info->mfw_mb_length = (u16)qed_rd(p_hwfn, p_ptt, p_info->mfw_mb_addr); - /* Get the current driver mailbox sequence before sending * the first command */ -- 2.17.1

7 years, 3 months

1
24
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror