July 2025 - Linux-stable-mirror

[PATCH 5.4.y] comedi: pcl812: Fix bit shift out of bounds

by Ian Abbott

[ Upstream commit b14b076ce593f72585412fc7fd3747e03a5e3632 ] When checking for a supported IRQ number, the following test is used: if ((1 << it->options[1]) & board->irq_bits) { However, `it->options[i]` is an unchecked `int` value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring `it->options[1]` to be within bounds before proceeding with the original test. Valid `it->options[1]` values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts. Reported-by: syzbot+32de323b0addb9e114ff(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=32de323b0addb9e114ff Fixes: fcdb427bc7cf ("Staging: comedi: add pcl821 driver") Cc: stable(a)vger.kernel.org # 5.13+ Signed-off-by: Ian Abbott <abbotti(a)mev.co.uk> Link: https://lore.kernel.org/r/20250707133429.73202-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/comedi/drivers/pcl812.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c index aefc1b849cf7..98112c79e2d7 100644 --- a/drivers/staging/comedi/drivers/pcl812.c +++ b/drivers/staging/comedi/drivers/pcl812.c @@ -1151,7 +1151,8 @@ static int pcl812_attach(struct comedi_device *dev, struct comedi_devconfig *it) if (!dev->pacer) return -ENOMEM; - if ((1 << it->options[1]) & board->irq_bits) { + if (it->options[1] > 0 && it->options[1] < 16 && + (1 << it->options[1]) & board->irq_bits) { ret = request_irq(it->options[1], pcl812_interrupt, 0, dev->board_name, dev); if (ret == 0) -- 2.47.2

2 months, 2 weeks

2
1
0 0

[PATCH net] net: phy: micrel: fix KSZ8081/KSZ8091 cable test

by Florian Larysch

Commit 21b688dabecb ("net: phy: micrel: Cable Diag feature for lan8814 phy") introduced cable_test support for the LAN8814 that reuses parts of the KSZ886x logic and introduced the cable_diag_reg and pair_mask parameters to account for differences between those chips. However, it did not update the ksz8081_type struct, so those members are now 0, causing no pairs to be tested in ksz886x_cable_test_get_status and ksz886x_cable_test_wait_for_completion to poll the wrong register for the affected PHYs (Basic Control/Reset, which is 0 in normal operation) and exit immediately. Fix this by setting both struct members accordingly. Fixes: 21b688dabecb ("net: phy: micrel: Cable Diag feature for lan8814 phy") Cc: stable(a)vger.kernel.org Signed-off-by: Florian Larysch <fl(a)n621.de> --- drivers/net/phy/micrel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 64aa03aed770..50c6a4e8cfa1 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -472,6 +472,8 @@ static const struct kszphy_type ksz8051_type = { static const struct kszphy_type ksz8081_type = { .led_mode_reg = MII_KSZPHY_CTRL_2, + .cable_diag_reg = KSZ8081_LMD, + .pair_mask = KSZPHY_WIRE_PAIR_MASK, .has_broadcast_disable = true, .has_nand_tree_disable = true, .has_rmii_ref_clk_sel = true, -- 2.50.1

2 months, 2 weeks

2
1
0 0

[PATCH net-next] net: ipv4: allow directed broadcast routes to use dst hint

by Oscar Maes

Currently, ip_extract_route_hint uses RTN_BROADCAST to decide whether to use the route dst hint mechanism. This check is too strict, as it prevents directed broadcast routes from using the hint, resulting in poor performance during bursts of directed broadcast traffic. Fix this in ip_extract_route_hint and modify ip_route_use_hint to preserve the intended behaviour. Signed-off-by: Oscar Maes <oscmaes92(a)gmail.com> --- net/ipv4/ip_input.c | 6 ++++-- net/ipv4/route.c | 2 +- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c index fc323994b..1581b98bc 100644 --- a/net/ipv4/ip_input.c +++ b/net/ipv4/ip_input.c @@ -589,8 +589,10 @@ static void ip_sublist_rcv_finish(struct list_head *head) static struct sk_buff *ip_extract_route_hint(const struct net *net, struct sk_buff *skb, int rt_type) { - if (fib4_has_custom_rules(net) || rt_type == RTN_BROADCAST || - IPCB(skb)->flags & IPSKB_MULTIPATH) + const struct iphdr *iph = ip_hdr(skb); + + if (fib4_has_custom_rules(net) || ipv4_is_lbcast(iph->daddr) || + (iph->daddr == 0 && iph->saddr == 0) || IPCB(skb)->flags & IPSKB_MULTIPATH) return NULL; return skb; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index f639a2ae8..1f212b2ce 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2210,7 +2210,7 @@ ip_route_use_hint(struct sk_buff *skb, __be32 daddr, __be32 saddr, goto martian_source; } - if (rt->rt_type != RTN_LOCAL) + if (!(rt->rt_flags & RTCF_LOCAL)) goto skip_validate_source; reason = fib_validate_source_reason(skb, saddr, daddr, dscp, 0, dev, -- 2.39.5

2 months, 2 weeks

3
2
0 0

[PATCH v2 2/4] riscv: use lw when reading int cpu in asm_per_cpu

by Radim Krčmář

REG_L is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide. The struct currently has a hole after cpu, so little endian accesses seemed fine. Fixes: be97d0db5f44 ("riscv: VMAP_STACK overflow detection thread-safe") Cc: <stable(a)vger.kernel.org> Reviewed-by: Alexandre Ghiti <alexghiti(a)rivosinc.com> Signed-off-by: Radim Krčmář <rkrcmar(a)ventanamicro.com> --- v2: split for stable [Alex] --- arch/riscv/include/asm/asm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/include/asm/asm.h b/arch/riscv/include/asm/asm.h index a8a2af6dfe9d..2a16e88e13de 100644 --- a/arch/riscv/include/asm/asm.h +++ b/arch/riscv/include/asm/asm.h @@ -91,7 +91,7 @@ #endif .macro asm_per_cpu dst sym tmp - REG_L \tmp, TASK_TI_CPU_NUM(tp) + lw \tmp, TASK_TI_CPU_NUM(tp) slli \tmp, \tmp, PER_CPU_OFFSET_SHIFT la \dst, __per_cpu_offset add \dst, \dst, \tmp -- 2.50.0

2 months, 2 weeks

1
0
0 0

[PATCH v2 1/4] riscv: use lw when reading int cpu in new_vmalloc_check

by Radim Krčmář

REG_L is wrong, because thread_info.cpu is 32-bit, not xlen-bit wide. The struct currently has a hole after cpu, so little endian accesses seemed fine. Fixes: 503638e0babf ("riscv: Stop emitting preventive sfence.vma for new vmalloc mappings") Cc: <stable(a)vger.kernel.org> Reviewed-by: Alexandre Ghiti <alexghiti(a)rivosinc.com> Signed-off-by: Radim Krčmář <rkrcmar(a)ventanamicro.com> --- v2: split for stable [Alex] --- arch/riscv/kernel/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S index 75656afa2d6b..4fdf187a62bf 100644 --- a/arch/riscv/kernel/entry.S +++ b/arch/riscv/kernel/entry.S @@ -46,7 +46,7 @@ * a0 = &new_vmalloc[BIT_WORD(cpu)] * a1 = BIT_MASK(cpu) */ - REG_L a2, TASK_TI_CPU(tp) + lw a2, TASK_TI_CPU(tp) /* * Compute the new_vmalloc element position: * (cpu / 64) * 8 = (cpu >> 6) << 3 -- 2.50.0

2 months, 2 weeks

1
0
0 0

[PATCH] ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx

by edip＠medip.dev

From: Edip Hazuri <edip(a)medip.dev> The mute led on this laptop is using ALC245 but requires a quirk to work This patch enables the existing quirk for the device. Tested on Victus 16-r1xxx Laptop. The LED behaviour works as intended. v2: - adapt the HD-audio code changes and rebase on for-next branch of tiwai/sound.git - link to v1: https://lore.kernel.org/linux-sound/20250724210756.61453-2-edip@medip.dev/ Cc: <stable(a)vger.kernel.org> Signed-off-by: Edip Hazuri <edip(a)medip.dev> --- sound/hda/codecs/realtek/alc269.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index 05019fa73..33ef08d25 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -6580,6 +6580,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8c91, "HP EliteBook 660", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8c96, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8c97, "HP ZBook", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), + SND_PCI_QUIRK(0x103c, 0x8c99, "HP Victus 16-r1xxx (MB 8C99)", ALC245_FIXUP_HP_MUTE_LED_COEFBIT), SND_PCI_QUIRK(0x103c, 0x8c9c, "HP Victus 16-s1xxx (MB 8C9C)", ALC245_FIXUP_HP_MUTE_LED_COEFBIT), SND_PCI_QUIRK(0x103c, 0x8ca1, "HP ZBook Power", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8ca2, "HP ZBook Power", ALC236_FIXUP_HP_GPIO_LED), -- 2.50.1

2 months, 2 weeks

2
1
0 0

[PATCH] ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx

by edip＠medip.dev

From: Edip Hazuri <edip(a)medip.dev> The mute led on this laptop is using ALC245 but requires a quirk to work This patch enables the existing quirk for the device. Tested on Victus 16-r1xxx Laptop. The LED behaviour works as intended. Cc: <stable(a)vger.kernel.org> Signed-off-by: Edip Hazuri <edip(a)medip.dev> --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2627e2f49..9656e6ebb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10874,6 +10874,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8c91, "HP EliteBook 660", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8c96, "HP", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), SND_PCI_QUIRK(0x103c, 0x8c97, "HP ZBook", ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF), + SND_PCI_QUIRK(0x103c, 0x8c99, "HP Victus 16-r1xxx (MB 8C99)", ALC245_FIXUP_HP_MUTE_LED_COEFBIT), SND_PCI_QUIRK(0x103c, 0x8c9c, "HP Victus 16-s1xxx (MB 8C9C)", ALC245_FIXUP_HP_MUTE_LED_COEFBIT), SND_PCI_QUIRK(0x103c, 0x8ca1, "HP ZBook Power", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8ca2, "HP ZBook Power", ALC236_FIXUP_HP_GPIO_LED), -- 2.50.1

2 months, 2 weeks

3
2
0 0

[PATCH] comedi: Make insn_rw_emulate_bits() do insn->n samples

by Ian Abbott

The `insn_rw_emulate_bits()` function is used as a default handler for `INSN_READ` instructions for subdevices that have a handler for `INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default handler for `INSN_WRITE` instructions for subdevices that have a handler for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the `INSN_READ` or `INSN_WRITE` instruction handling with a constructed `INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE` instructions are supposed to be able read or write multiple samples, indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently only handles a single sample. For `INSN_READ`, the comedi core will copy `insn->n` samples back to user-space. (That triggered KASAN kernel-infoleak errors when `insn->n` was greater than 1, but that is being fixed more generally elsewhere in the comedi core.) Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return an error, to conform to the general expectation for `INSN_READ` and `INSN_WRITE` handlers. Fixes: ed9eccbe8970 ("Staging: add comedi core") Cc: <stable(a)vger.kernel.org> # 5.13+ Signed-off-by: Ian Abbott <abbotti(a)mev.co.uk> --- For 5.4.y and 5.10.y, this patch conflicts with submitted patches for upstream commit e9cb26291d00 ("comedi: Fix use of uninitialized data in insn_rw_emulate_bits()"). --- drivers/comedi/drivers.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/comedi/drivers.c b/drivers/comedi/drivers.c index f1dc854928c1..c9ebaadc5e82 100644 --- a/drivers/comedi/drivers.c +++ b/drivers/comedi/drivers.c @@ -620,11 +620,9 @@ static int insn_rw_emulate_bits(struct comedi_device *dev, unsigned int chan = CR_CHAN(insn->chanspec); unsigned int base_chan = (chan < 32) ? 0 : chan; unsigned int _data[2]; + unsigned int i; int ret; - if (insn->n == 0) - return 0; - memset(_data, 0, sizeof(_data)); memset(&_insn, 0, sizeof(_insn)); _insn.insn = INSN_BITS; @@ -635,18 +633,21 @@ static int insn_rw_emulate_bits(struct comedi_device *dev, if (insn->insn == INSN_WRITE) { if (!(s->subdev_flags & SDF_WRITABLE)) return -EINVAL; - _data[0] = 1U << (chan - base_chan); /* mask */ - _data[1] = data[0] ? (1U << (chan - base_chan)) : 0; /* bits */ + _data[0] = 1U << (chan - base_chan); /* mask */ } + for (i = 0; i < insn->n; i++) { + if (insn->insn == INSN_WRITE) + _data[1] = data[i] ? _data[0] : 0; /* bits */ - ret = s->insn_bits(dev, s, &_insn, _data); - if (ret < 0) - return ret; + ret = s->insn_bits(dev, s, &_insn, _data); + if (ret < 0) + return ret; - if (insn->insn == INSN_READ) - data[0] = (_data[1] >> (chan - base_chan)) & 1; + if (insn->insn == INSN_READ) + data[i] = (_data[1] >> (chan - base_chan)) & 1; + } - return 1; + return insn->n; } static int __comedi_device_postconfig_async(struct comedi_device *dev, -- 2.47.2

2 months, 2 weeks

1
0
0 0

[PATCH] scsi: fill in DMA padding bytes in scsi_alloc_sgtables

by Petr Vaganov

During fuzz testing, the following issue was discovered: BUG: KMSAN: uninit-value in __dma_map_sg_attrs+0x217/0x310 __dma_map_sg_attrs+0x217/0x310 dma_map_sg_attrs+0x4a/0x70 ata_qc_issue+0x9f8/0x1420 __ata_scsi_queuecmd+0x1657/0x1740 ata_scsi_queuecmd+0x79a/0x920 scsi_queue_rq+0x4472/0x4f40 blk_mq_dispatch_rq_list+0x1cca/0x3ee0 __blk_mq_sched_dispatch_requests+0x458/0x630 blk_mq_sched_dispatch_requests+0x15b/0x340 __blk_mq_run_hw_queue+0xe5/0x250 __blk_mq_delay_run_hw_queue+0x138/0x780 blk_mq_run_hw_queue+0x4bb/0x7e0 blk_mq_sched_insert_request+0x2a7/0x4c0 blk_execute_rq+0x497/0x8a0 sg_io+0xbe0/0xe20 scsi_ioctl+0x2b36/0x3c60 sr_block_ioctl+0x319/0x440 blkdev_ioctl+0x80f/0xd70 __se_sys_ioctl+0x219/0x420 __x64_sys_ioctl+0x93/0xe0 x64_sys_call+0x1d6c/0x3ad0 do_syscall_64+0x4c/0xa0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Uninit was created at: __alloc_pages+0x5c0/0xc80 alloc_pages+0xe0e/0x1050 blk_rq_map_user_iov+0x2b77/0x6100 blk_rq_map_user_io+0x2fa/0x4d0 sg_io+0xad6/0xe20 scsi_ioctl+0x2b36/0x3c60 sr_block_ioctl+0x319/0x440 blkdev_ioctl+0x80f/0xd70 __se_sys_ioctl+0x219/0x420 __x64_sys_ioctl+0x93/0xe0 x64_sys_call+0x1d6c/0x3ad0 do_syscall_64+0x4c/0xa0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Bytes 14-15 of 16 are uninitialized Memory access of size 16 starts at ffff88800cbdb000 When processing the last unaligned element of the scatterlist, it is supplemented with missing bytes in the amount of pad_len. These bytes remain uninitialized, which leads to a problem. Add zeroing pad_len bytes of padding by pad_offset offset before increasing its length. This ensures that the DMA does not receive uninitialized data and eliminates the KMSAN warning. In this case, the pages are not located in highmem, but in the general case they might be, so kmap_local_page() is used for mapping. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 40b01b9bbdf5 ("block: update bio according to DMA alignment padding") Co-developed-by: Boris Tonofa <b.tonofa(a)ideco.ru> Signed-off-by: Boris Tonofa <b.tonofa(a)ideco.ru> Signed-off-by: Petr Vaganov <p.vaganov(a)ideco.ru> --- drivers/scsi/scsi_lib.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 144c72f0737a..d287e24b6013 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1153,6 +1153,11 @@ blk_status_t scsi_alloc_sgtables(struct scsi_cmnd *cmd) if (blk_rq_bytes(rq) & rq->q->limits.dma_pad_mask) { unsigned int pad_len = (rq->q->limits.dma_pad_mask & ~blk_rq_bytes(rq)) + 1; + unsigned int pad_offset = last_sg->offset + last_sg->length; + void *vaddr = kmap_local_page(sg_page(last_sg)); + + memset(vaddr + pad_offset, 0, pad_len); + kunmap_local(vaddr); last_sg->length += pad_len; cmd->extra_len += pad_len; -- 2.50.1

2 months, 2 weeks

2
2
0 0

[PATCH v5] riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot

by Jingwei Wang

The hwprobe vDSO data for some keys, like MISALIGNED_VECTOR_PERF, is determined by an asynchronous kthread. This can create a race condition where the kthread finishes after the vDSO data has already been populated, causing userspace to read stale values. To fix this, a completion-based framework is introduced to robustly synchronize the async probes with the vDSO data population. The waiting function, init_hwprobe_vdso_data(), now blocks on wait_for_completion() until all probes signal they are done. Furthermore, to prevent this potential blocking from impacting boot performance, the initialization is deferred to late_initcall. This is safe as the data is only required by userspace (which starts much later) and moves the synchronization delay off the critical boot path. Reported-by: Tsukasa OI <research_trasio(a)irq.a4lg.com> Closes: https://lore.kernel.org/linux-riscv/760d637b-b13b-4518-b6bf-883d55d44e7f@ir… Fixes: e7c9d66e313b ("RISC-V: Report vector unaligned access speed hwprobe") Cc: Palmer Dabbelt <palmer(a)dabbelt.com> Cc: Alexandre Ghiti <alexghiti(a)rivosinc.com> Cc: Olof Johansson <olof(a)lixom.net> Cc: stable(a)vger.kernel.org Signed-off-by: Jingwei Wang <wangjingwei(a)iscas.ac.cn> --- Changes in v5: - Reworked the synchronization logic to a robust "sentinel-count" pattern based on feedback from Alexandre. - Fixed a "multiple definition" linker error for nommu builds by changing the header-file stub functions to `static inline`, as pointed out by Olof. - Updated the commit message to better explain the rationale for moving the vDSO initialization to `late_initcall`. Changes in v4: - Reworked the synchronization mechanism based on feedback from Palmer and Alexandre. - Instead of a post-hoc refresh, this version introduces a robust completion-based framework using an atomic counter to ensure async probes are finished before populating the vDSO. - Moved the vdso data initialization to a late_initcall to avoid impacting boot time. Changes in v3: - Retained existing blank line. Changes in v2: - Addressed feedback from Yixun's regarding #ifdef CONFIG_MMU usage. - Updated commit message to provide a high-level summary. - Added Fixes tag for commit e7c9d66e313b. v1: https://lore.kernel.org/linux-riscv/20250521052754.185231-1-wangjingwei@isc… arch/riscv/include/asm/hwprobe.h | 8 +++++++- arch/riscv/kernel/sys_hwprobe.c | 20 +++++++++++++++++++- arch/riscv/kernel/unaligned_access_speed.c | 9 +++++++-- 3 files changed, 33 insertions(+), 4 deletions(-) diff --git a/arch/riscv/include/asm/hwprobe.h b/arch/riscv/include/asm/hwprobe.h index 7fe0a379474ae2c6..3b2888126e659ea1 100644 --- a/arch/riscv/include/asm/hwprobe.h +++ b/arch/riscv/include/asm/hwprobe.h @@ -40,5 +40,11 @@ static inline bool riscv_hwprobe_pair_cmp(struct riscv_hwprobe *pair, return pair->value == other_pair->value; } - +#ifdef CONFIG_MMU +void riscv_hwprobe_register_async_probe(void); +void riscv_hwprobe_complete_async_probe(void); +#else +static inline void riscv_hwprobe_register_async_probe(void) {} +static inline void riscv_hwprobe_complete_async_probe(void) {} +#endif #endif diff --git a/arch/riscv/kernel/sys_hwprobe.c b/arch/riscv/kernel/sys_hwprobe.c index 0b170e18a2beba57..ee02aeb03e7bd3d8 100644 --- a/arch/riscv/kernel/sys_hwprobe.c +++ b/arch/riscv/kernel/sys_hwprobe.c @@ -5,6 +5,8 @@ * more details. */ #include <linux/syscalls.h> +#include <linux/completion.h> +#include <linux/atomic.h> #include <asm/cacheflush.h> #include <asm/cpufeature.h> #include <asm/hwprobe.h> @@ -467,6 +469,20 @@ static int do_riscv_hwprobe(struct riscv_hwprobe __user *pairs, #ifdef CONFIG_MMU +static DECLARE_COMPLETION(boot_probes_done); +static atomic_t pending_boot_probes = ATOMIC_INIT(1); + +void riscv_hwprobe_register_async_probe(void) +{ + atomic_inc(&pending_boot_probes); +} + +void riscv_hwprobe_complete_async_probe(void) +{ + if (atomic_dec_and_test(&pending_boot_probes)) + complete(&boot_probes_done); +} + static int __init init_hwprobe_vdso_data(void) { struct vdso_arch_data *avd = vdso_k_arch_data; @@ -474,6 +490,8 @@ static int __init init_hwprobe_vdso_data(void) struct riscv_hwprobe pair; int key; + if (unlikely(!atomic_dec_and_test(&pending_boot_probes))) + wait_for_completion(&boot_probes_done); /* * Initialize vDSO data with the answers for the "all CPUs" case, to * save a syscall in the common case. @@ -504,7 +522,7 @@ static int __init init_hwprobe_vdso_data(void) return 0; } -arch_initcall_sync(init_hwprobe_vdso_data); +late_initcall(init_hwprobe_vdso_data); #endif /* CONFIG_MMU */ diff --git a/arch/riscv/kernel/unaligned_access_speed.c b/arch/riscv/kernel/unaligned_access_speed.c index ae2068425fbcd207..4b8ad2673b0f7470 100644 --- a/arch/riscv/kernel/unaligned_access_speed.c +++ b/arch/riscv/kernel/unaligned_access_speed.c @@ -379,6 +379,7 @@ static void check_vector_unaligned_access(struct work_struct *work __always_unus static int __init vec_check_unaligned_access_speed_all_cpus(void *unused __always_unused) { schedule_on_each_cpu(check_vector_unaligned_access); + riscv_hwprobe_complete_async_probe(); return 0; } @@ -473,8 +474,12 @@ static int __init check_unaligned_access_all_cpus(void) per_cpu(vector_misaligned_access, cpu) = unaligned_vector_speed_param; } else if (!check_vector_unaligned_access_emulated_all_cpus() && IS_ENABLED(CONFIG_RISCV_PROBE_VECTOR_UNALIGNED_ACCESS)) { - kthread_run(vec_check_unaligned_access_speed_all_cpus, - NULL, "vec_check_unaligned_access_speed_all_cpus"); + riscv_hwprobe_register_async_probe(); + if (IS_ERR(kthread_run(vec_check_unaligned_access_speed_all_cpus, + NULL, "vec_check_unaligned_access_speed_all_cpus"))) { + pr_warn("Failed to create vec_unalign_check kthread\n"); + riscv_hwprobe_complete_async_probe(); + } } /* -- 2.50.0

2 months, 2 weeks

2
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2025