July 2025 - Linux-stable-mirror

[REGRESSION] Packet loss after hot-plugging ethernet cable on HP Zbook (Arrow Lake)

by En-Wei WU

Hi, I'm seeing a regression on an HP ZBook using the e1000e driver (chipset PCI ID: [8086:57a0]) -- the system can't get an IP address after hot-plugging an Ethernet cable. In this case, the Ethernet cable was unplugged at boot. The network interface eno1 was present but stuck in the DHCP process. Using tcpdump, only TX packets were visible and never got any RX -- indicating a possible packet loss or link-layer issue. This is on the vanilla Linux 6.16-rc4 (commit 62f224733431dbd564c4fe800d4b67a0cf92ed10). Bisect says it's this commit: commit efaaf344bc2917cbfa5997633bc18a05d3aed27f Author: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Date: Thu Mar 13 16:05:56 2025 +0200 e1000e: change k1 configuration on MTP and later platforms Starting from Meteor Lake, the Kumeran interface between the integrated MAC and the I219 PHY works at a different frequency. This causes sporadic MDI errors when accessing the PHY, and in rare circumstances could lead to packet corruption. To overcome this, introduce minor changes to the Kumeran idle state (K1) parameters during device initialization. Hardware reset reverts this configuration, therefore it needs to be applied in a few places. Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake") Signed-off-by: Vitaly Lifshits <vitaly.lifshits(a)intel.com> Tested-by: Avigail Dahan <avigailx.dahan(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> drivers/net/ethernet/intel/e1000e/defines.h | 3 +++ drivers/net/ethernet/intel/e1000e/ich8lan.c | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----- drivers/net/ethernet/intel/e1000e/ich8lan.h | 4 ++++ 3 files changed, 82 insertions(+), 5 deletions(-) Reverting this patch resolves the issue. Based on the symptoms and the bisect result, this issue might be similar to https://lore.kernel.org/intel-wired-lan/20250626153544.1853d106@onyx.my.dom… Affected machine is: HP ZBook X G1i 16 inch Mobile Workstation PC, BIOS 01.02.03 05/27/2025 (see end of message for dmesg from boot) CPU model name: Intel(R) Core(TM) Ultra 7 265H (Arrow Lake) ethtool output: driver: e1000e version: 6.16.0-061600rc4-generic firmware-version: 0.1-4 expansion-rom-version: bus-info: 0000:00:1f.6 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes supports-priv-flags: yes lspci output: 0:1f.6 Ethernet controller [0200]: Intel Corporation Device [8086:57a0] DeviceName: Onboard Ethernet Subsystem: Hewlett-Packard Company Device [103c:8e1d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 162 IOMMU group: 17 Region 0: Memory at 92280000 (32-bit, non-prefetchable) [size=128K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee00798 Data: 0000 Kernel driver in use: e1000e Kernel modules: e1000e The relevant dmesg: <<<cable disconnected>>> [ 0.927394] e1000e: Intel(R) PRO/1000 Network Driver [ 0.927398] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.927933] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) [ 0.928249] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.155716] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock [ 1.220694] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 24:fb:e3:bf:28:c6 [ 1.220721] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 1.220903] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF [ 1.222632] e1000e 0000:00:1f.6 eno1: renamed from eth0 <<<cable connected>>> [ 153.932626] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Half Duplex, Flow Control: None [ 153.934527] e1000e 0000:00:1f.6 eno1: NIC Link is Down [ 157.622238] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None No error message seen after hot-plugging the Ethernet cable. -- Best Regards, En-Wei.

4 months, 2 weeks

3
3
0 0

[PATCH] ALSA: ad1816a: Fix potential NULL pointer deref in snd_card_ad1816a_pnp()

by Thorsten Blum

Use pr_warn() instead of dev_warn() when 'pdev' is NULL to avoid a potential NULL pointer dereference. Cc: stable(a)vger.kernel.org Fixes: 20869176d7a7 ("ALSA: ad1816a: Use standard print API") Signed-off-by: Thorsten Blum <thorsten.blum(a)linux.dev> --- sound/isa/ad1816a/ad1816a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/isa/ad1816a/ad1816a.c b/sound/isa/ad1816a/ad1816a.c index 99006dc4777e..5c9e2d41d900 100644 --- a/sound/isa/ad1816a/ad1816a.c +++ b/sound/isa/ad1816a/ad1816a.c @@ -98,7 +98,7 @@ static int snd_card_ad1816a_pnp(int dev, struct pnp_card_link *card, pdev = pnp_request_card_device(card, id->devs[1].id, NULL); if (pdev == NULL) { mpu_port[dev] = -1; - dev_warn(&pdev->dev, "MPU401 device busy, skipping.\n"); + pr_warn("MPU401 device busy, skipping.\n"); return 0; } -- 2.50.0

4 months, 2 weeks

2
1
0 0

[PATCH 1/2] KVM: arm64: Fix enforcement of upper bound on MDCR_EL2.HPMN

by Ben Horgan

Previously, u64_replace_bits() was used to no effect as the return value was ignored. Convert to u64p_replace_bits() so the value is updated in place. Signed-off-by: Ben Horgan <ben.horgan(a)arm.com> Fixes: efff9dd2fee7 ("KVM: arm64: Handle out-of-bound write to MDCR_EL2.HPMN") Cc: Marc Zyngier <maz(a)kernel.org> Cc: stable(a)vger.kernel.org --- arch/arm64/kvm/sys_regs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index 76c2f0da821f..c20bd6f21e60 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -2624,7 +2624,7 @@ static bool access_mdcr(struct kvm_vcpu *vcpu, */ if (hpmn > vcpu->kvm->arch.nr_pmu_counters) { hpmn = vcpu->kvm->arch.nr_pmu_counters; - u64_replace_bits(val, hpmn, MDCR_EL2_HPMN); + u64p_replace_bits(&val, hpmn, MDCR_EL2_HPMN); } __vcpu_assign_sys_reg(vcpu, MDCR_EL2, val); -- 2.43.0

4 months, 2 weeks

2
1
0 0

+ mm-damon-fix-divide-by-zero-in-damon_get_intervals_score.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: mm/damon: fix divide by zero in damon_get_intervals_score() has been added to the -mm mm-hotfixes-unstable branch. Its filename is mm-damon-fix-divide-by-zero-in-damon_get_intervals_score.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Honggyu Kim <honggyu.kim(a)sk.com> Subject: mm/damon: fix divide by zero in damon_get_intervals_score() Date: Wed, 2 Jul 2025 09:02:04 +0900 The current implementation allows having zero size regions with no special reasons, but damon_get_intervals_score() gets crashed by divide by zero when the region size is zero. [ 29.403950] Oops: divide error: 0000 [#1] SMP NOPTI This patch fixes the bug, but does not disallow zero size regions to keep the backward compatibility since disallowing zero size regions might be a breaking change for some users. In addition, the same crash can happen when intervals_goal.access_bp is zero so this should be fixed in stable trees as well. Link: https://lkml.kernel.org/r/20250702000205.1921-5-honggyu.kim@sk.com Fixes: f04b0fedbe71 ("mm/damon/core: implement intervals auto-tuning") Signed-off-by: Honggyu Kim <honggyu.kim(a)sk.com> Reviewed-by: SeongJae Park <sj(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/damon/core.c | 1 + 1 file changed, 1 insertion(+) --- a/mm/damon/core.c~mm-damon-fix-divide-by-zero-in-damon_get_intervals_score +++ a/mm/damon/core.c @@ -1449,6 +1449,7 @@ static unsigned long damon_get_intervals } } target_access_events = max_access_events * goal_bp / 10000; + target_access_events = target_access_events ? : 1; return access_events * 10000 / target_access_events; } _ Patches currently in -mm which might be from honggyu.kim(a)sk.com are samples-damon-fix-damon-sample-prcl-for-start-failure.patch samples-damon-fix-damon-sample-wsse-for-start-failure.patch samples-damon-fix-damon-sample-mtier-for-start-failure.patch mm-damon-fix-divide-by-zero-in-damon_get_intervals_score.patch

4 months, 2 weeks

1
0
0 0

+ samples-damon-fix-damon-sample-mtier-for-start-failure.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: samples/damon: fix damon sample mtier for start failure has been added to the -mm mm-hotfixes-unstable branch. Its filename is samples-damon-fix-damon-sample-mtier-for-start-failure.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Honggyu Kim <honggyu.kim(a)sk.com> Subject: samples/damon: fix damon sample mtier for start failure Date: Wed, 2 Jul 2025 09:02:03 +0900 The damon_sample_mtier_start() can fail so we must reset the "enable" parameter to "false" again for proper rollback. In such cases, setting Y to "enable" then N triggers the similar crash with mtier because damon sample start failed but the "enable" stays as Y. Link: https://lkml.kernel.org/r/20250702000205.1921-4-honggyu.kim@sk.com Fixes: 82a08bde3cf7 ("samples/damon: implement a DAMON module for memory tiering") Signed-off-by: Honggyu Kim <honggyu.kim(a)sk.com> Reviewed-by: SeongJae Park <sj(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- samples/damon/mtier.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/samples/damon/mtier.c~samples-damon-fix-damon-sample-mtier-for-start-failure +++ a/samples/damon/mtier.c @@ -164,8 +164,12 @@ static int damon_sample_mtier_enable_sto if (enable == enabled) return 0; - if (enable) - return damon_sample_mtier_start(); + if (enable) { + err = damon_sample_mtier_start(); + if (err) + enable = false; + return err; + } damon_sample_mtier_stop(); return 0; } _ Patches currently in -mm which might be from honggyu.kim(a)sk.com are samples-damon-fix-damon-sample-prcl-for-start-failure.patch samples-damon-fix-damon-sample-wsse-for-start-failure.patch samples-damon-fix-damon-sample-mtier-for-start-failure.patch mm-damon-fix-divide-by-zero-in-damon_get_intervals_score.patch

4 months, 2 weeks

1
0
0 0

+ samples-damon-fix-damon-sample-wsse-for-start-failure.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: samples/damon: fix damon sample wsse for start failure has been added to the -mm mm-hotfixes-unstable branch. Its filename is samples-damon-fix-damon-sample-wsse-for-start-failure.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Honggyu Kim <honggyu.kim(a)sk.com> Subject: samples/damon: fix damon sample wsse for start failure Date: Wed, 2 Jul 2025 09:02:02 +0900 The damon_sample_wsse_start() can fail so we must reset the "enable" parameter to "false" again for proper rollback. In such cases, setting Y to "enable" then N triggers the similar crash with wsse because damon sample start failed but the "enable" stays as Y. Link: https://lkml.kernel.org/r/20250702000205.1921-3-honggyu.kim@sk.com Fixes: b757c6cfc696 ("samples/damon/wsse: start and stop DAMON as the user requests") Signed-off-by: Honggyu Kim <honggyu.kim(a)sk.com> Reviewed-by: SeongJae Park <sj(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- samples/damon/wsse.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/samples/damon/wsse.c~samples-damon-fix-damon-sample-wsse-for-start-failure +++ a/samples/damon/wsse.c @@ -102,8 +102,12 @@ static int damon_sample_wsse_enable_stor if (enable == enabled) return 0; - if (enable) - return damon_sample_wsse_start(); + if (enable) { + err = damon_sample_wsse_start(); + if (err) + enable = false; + return err; + } damon_sample_wsse_stop(); return 0; } _ Patches currently in -mm which might be from honggyu.kim(a)sk.com are samples-damon-fix-damon-sample-prcl-for-start-failure.patch samples-damon-fix-damon-sample-wsse-for-start-failure.patch samples-damon-fix-damon-sample-mtier-for-start-failure.patch mm-damon-fix-divide-by-zero-in-damon_get_intervals_score.patch

4 months, 2 weeks

1
0
0 0

+ samples-damon-fix-damon-sample-prcl-for-start-failure.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: samples/damon: fix damon sample prcl for start failure has been added to the -mm mm-hotfixes-unstable branch. Its filename is samples-damon-fix-damon-sample-prcl-for-start-failure.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Honggyu Kim <honggyu.kim(a)sk.com> Subject: samples/damon: fix damon sample prcl for start failure Date: Wed, 2 Jul 2025 09:02:01 +0900 Patch series "mm/damon: fix divide by zero and its samples", v3. This series includes fixes against damon and its samples to make it safer when damon sample starting fails. It includes the following changes. - fix unexpected divide by zero crash for zero size regions - fix bugs for damon samples in case of start failures This patch (of 4): The damon_sample_prcl_start() can fail so we must reset the "enable" parameter to "false" again for proper rollback. In such cases, setting Y to "enable" then N triggers the following crash because damon sample start failed but the "enable" stays as Y. [ 2441.419649] damon_sample_prcl: start [ 2454.146817] damon_sample_prcl: stop [ 2454.146862] ------------[ cut here ]------------ [ 2454.146865] kernel BUG at mm/slub.c:546! [ 2454.148183] Oops: invalid opcode: 0000 [#1] SMP NOPTI ... [ 2454.167555] Call Trace: [ 2454.167822] <TASK> [ 2454.168061] damon_destroy_ctx+0x78/0x140 [ 2454.168454] damon_sample_prcl_enable_store+0x8d/0xd0 [ 2454.168932] param_attr_store+0xa1/0x120 [ 2454.169315] module_attr_store+0x20/0x50 [ 2454.169695] sysfs_kf_write+0x72/0x90 [ 2454.170065] kernfs_fop_write_iter+0x150/0x1e0 [ 2454.170491] vfs_write+0x315/0x440 [ 2454.170833] ksys_write+0x69/0xf0 [ 2454.171162] __x64_sys_write+0x19/0x30 [ 2454.171525] x64_sys_call+0x18b2/0x2700 [ 2454.171900] do_syscall_64+0x7f/0x680 [ 2454.172258] ? exit_to_user_mode_loop+0xf6/0x180 [ 2454.172694] ? clear_bhb_loop+0x30/0x80 [ 2454.173067] ? clear_bhb_loop+0x30/0x80 [ 2454.173439] entry_SYSCALL_64_after_hwframe+0x76/0x7e Link: https://lkml.kernel.org/r/20250702000205.1921-1-honggyu.kim@sk.com Link: https://lkml.kernel.org/r/20250702000205.1921-2-honggyu.kim@sk.com Fixes: 2aca254620a8 ("samples/damon: introduce a skeleton of a smaple DAMON module for proactive reclamation") Signed-off-by: Honggyu Kim <honggyu.kim(a)sk.com> Reviewed-by: SeongJae Park <sj(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- samples/damon/prcl.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/samples/damon/prcl.c~samples-damon-fix-damon-sample-prcl-for-start-failure +++ a/samples/damon/prcl.c @@ -122,8 +122,12 @@ static int damon_sample_prcl_enable_stor if (enable == enabled) return 0; - if (enable) - return damon_sample_prcl_start(); + if (enable) { + err = damon_sample_prcl_start(); + if (err) + enable = false; + return err; + } damon_sample_prcl_stop(); return 0; } _ Patches currently in -mm which might be from honggyu.kim(a)sk.com are samples-damon-fix-damon-sample-prcl-for-start-failure.patch samples-damon-fix-damon-sample-wsse-for-start-failure.patch samples-damon-fix-damon-sample-mtier-for-start-failure.patch mm-damon-fix-divide-by-zero-in-damon_get_intervals_score.patch

4 months, 2 weeks

1
0
0 0

[PATCH] drm/nouveau: Do not fail module init on debugfs errors

by Aaron Thompson

From: Aaron Thompson <dev(a)aaront.org> If CONFIG_DEBUG_FS is enabled, nouveau_drm_init() returns an error if it fails to create the "nouveau" directory in debugfs. One case where that will happen is when debugfs access is restricted by CONFIG_DEBUG_FS_ALLOW_NONE or by the boot parameter debugfs=off, which cause the debugfs APIs to return -EPERM. So just ignore errors from debugfs. Note that nouveau_debugfs_root may be an error now, but that is a standard pattern for debugfs. From include/linux/debugfs.h: "NOTE: it's expected that most callers should _ignore_ the errors returned by this function. Other debugfs functions handle the fact that the "dentry" passed to them could be an error and they don't crash in that case. Drivers should generally work fine even if debugfs fails to init anyway." Fixes: 97118a1816d2 ("drm/nouveau: create module debugfs root") Cc: stable(a)vger.kernel.org Signed-off-by: Aaron Thompson <dev(a)aaront.org> --- drivers/gpu/drm/nouveau/nouveau_debugfs.c | 6 +----- drivers/gpu/drm/nouveau/nouveau_debugfs.h | 5 ++--- drivers/gpu/drm/nouveau/nouveau_drm.c | 4 +--- 3 files changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_debugfs.c b/drivers/gpu/drm/nouveau/nouveau_debugfs.c index 200e65a7cefc..c7869a639bef 100644 --- a/drivers/gpu/drm/nouveau/nouveau_debugfs.c +++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.c @@ -314,14 +314,10 @@ nouveau_debugfs_fini(struct nouveau_drm *drm) drm->debugfs = NULL; } -int +void nouveau_module_debugfs_init(void) { nouveau_debugfs_root = debugfs_create_dir("nouveau", NULL); - if (IS_ERR(nouveau_debugfs_root)) - return PTR_ERR(nouveau_debugfs_root); - - return 0; } void diff --git a/drivers/gpu/drm/nouveau/nouveau_debugfs.h b/drivers/gpu/drm/nouveau/nouveau_debugfs.h index b7617b344ee2..d05ed0e641c4 100644 --- a/drivers/gpu/drm/nouveau/nouveau_debugfs.h +++ b/drivers/gpu/drm/nouveau/nouveau_debugfs.h @@ -24,7 +24,7 @@ extern void nouveau_debugfs_fini(struct nouveau_drm *); extern struct dentry *nouveau_debugfs_root; -int nouveau_module_debugfs_init(void); +void nouveau_module_debugfs_init(void); void nouveau_module_debugfs_fini(void); #else static inline void @@ -42,10 +42,9 @@ nouveau_debugfs_fini(struct nouveau_drm *drm) { } -static inline int +static inline void nouveau_module_debugfs_init(void) { - return 0; } static inline void diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c index 0c82a63cd49d..1527b801f013 100644 --- a/drivers/gpu/drm/nouveau/nouveau_drm.c +++ b/drivers/gpu/drm/nouveau/nouveau_drm.c @@ -1461,9 +1461,7 @@ nouveau_drm_init(void) if (!nouveau_modeset) return 0; - ret = nouveau_module_debugfs_init(); - if (ret) - return ret; + nouveau_module_debugfs_init(); #ifdef CONFIG_NOUVEAU_PLATFORM_DRIVER platform_driver_register(&nouveau_platform_driver); base-commit: d0b3b7b22dfa1f4b515fd3a295b3fd958f9e81af -- 2.39.5

4 months, 2 weeks

3
2
0 0

[PATCH v6 01/12] platform/x86/intel/pmt: fix a crashlog NULL pointer access

by Michael J. Ruhl

Usage of the intel_pmt_read() for binary sysfs, requires a pcidev. The current use of the endpoint value is only valid for telemetry endpoint usage. Without the ep, the crashlog usage causes the following NULL pointer exception: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:intel_pmt_read+0x3b/0x70 [pmt_class] Code: Call Trace: <TASK> ? sysfs_kf_bin_read+0xc0/0xe0 kernfs_fop_read_iter+0xac/0x1a0 vfs_read+0x26d/0x350 ksys_read+0x6b/0xe0 __x64_sys_read+0x1d/0x30 x64_sys_call+0x1bc8/0x1d70 do_syscall_64+0x6d/0x110 Augment struct intel_pmt_entry with a pointer to the pcidev to avoid the NULL pointer exception. Reviewed-by: Tejas Upadhyay <tejas.upadhyay(a)intel.com> Fixes: 045a513040cc ("platform/x86/intel/pmt: Use PMT callbacks") Cc: <stable(a)vger.kernel.org> Signed-off-by: Michael J. Ruhl <michael.j.ruhl(a)intel.com> --- drivers/platform/x86/intel/pmt/class.c | 3 ++- drivers/platform/x86/intel/pmt/class.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel/pmt/class.c b/drivers/platform/x86/intel/pmt/class.c index 7233b654bbad..d046e8752173 100644 --- a/drivers/platform/x86/intel/pmt/class.c +++ b/drivers/platform/x86/intel/pmt/class.c @@ -97,7 +97,7 @@ intel_pmt_read(struct file *filp, struct kobject *kobj, if (count > entry->size - off) count = entry->size - off; - count = pmt_telem_read_mmio(entry->ep->pcidev, entry->cb, entry->header.guid, buf, + count = pmt_telem_read_mmio(entry->pcidev, entry->cb, entry->header.guid, buf, entry->base, off, count); return count; @@ -252,6 +252,7 @@ static int intel_pmt_populate_entry(struct intel_pmt_entry *entry, return -EINVAL; } + entry->pcidev = pci_dev; entry->guid = header->guid; entry->size = header->size; entry->cb = ivdev->priv_data; diff --git a/drivers/platform/x86/intel/pmt/class.h b/drivers/platform/x86/intel/pmt/class.h index b2006d57779d..f6ce80c4e051 100644 --- a/drivers/platform/x86/intel/pmt/class.h +++ b/drivers/platform/x86/intel/pmt/class.h @@ -39,6 +39,7 @@ struct intel_pmt_header { struct intel_pmt_entry { struct telem_endpoint *ep; + struct pci_dev *pcidev; struct intel_pmt_header header; struct bin_attribute pmt_bin_attr; struct kobject *kobj; -- 2.49.0

4 months, 2 weeks

1
0
0 0

+ kasan-remove-kasan_find_vm_area-to-prevent-possible-deadlock.patch added to mm-hotfixes-unstable branch

by Andrew Morton

The patch titled Subject: kasan: remove kasan_find_vm_area() to prevent possible deadlock has been added to the -mm mm-hotfixes-unstable branch. Its filename is kasan-remove-kasan_find_vm_area-to-prevent-possible-deadlock.patch This patch will shortly appear at https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patche… This patch will later appear in the mm-hotfixes-unstable branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next via the mm-everything branch at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm and is updated there every 2-3 working days ------------------------------------------------------ From: Yeoreum Yun <yeoreum.yun(a)arm.com> Subject: kasan: remove kasan_find_vm_area() to prevent possible deadlock Date: Thu, 3 Jul 2025 19:10:18 +0100 find_vm_area() couldn't be called in atomic_context. If find_vm_area() is called to reports vm area information, kasan can trigger deadlock like: CPU0 CPU1 vmalloc(); alloc_vmap_area(); spin_lock(&vn->busy.lock) spin_lock_bh(&some_lock); <interrupt occurs> <in softirq> spin_lock(&some_lock); <access invalid address> kasan_report(); print_report(); print_address_description(); kasan_find_vm_area(); find_vm_area(); spin_lock(&vn->busy.lock) // deadlock! To prevent possible deadlock while kasan reports, remove kasan_find_vm_area(). Link: https://lkml.kernel.org/r/20250703181018.580833-1-yeoreum.yun@arm.com Fixes: c056a364e954 ("kasan: print virtual mapping info in reports") Signed-off-by: Yeoreum Yun <yeoreum.yun(a)arm.com> Reported-by: Yunseong Kim <ysk(a)kzalloc.com> Cc: Alexander Potapenko <glider(a)google.com> Cc: Andrey Konovalov <andreyknvl(a)gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a(a)gmail.com> Cc: Byungchul Park <byungchul(a)sk.com> Cc: Dmitriy Vyukov <dvyukov(a)google.com> Cc: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Vincenzo Frascino <vincenzo.frascino(a)arm.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/kasan/report.c | 45 +------------------------------------------- 1 file changed, 2 insertions(+), 43 deletions(-) --- a/mm/kasan/report.c~kasan-remove-kasan_find_vm_area-to-prevent-possible-deadlock +++ a/mm/kasan/report.c @@ -370,36 +370,6 @@ static inline bool init_task_stack_addr( sizeof(init_thread_union.stack)); } -/* - * This function is invoked with report_lock (a raw_spinlock) held. A - * PREEMPT_RT kernel cannot call find_vm_area() as it will acquire a sleeping - * rt_spinlock. - * - * For !RT kernel, the PROVE_RAW_LOCK_NESTING config option will print a - * lockdep warning for this raw_spinlock -> spinlock dependency. This config - * option is enabled by default to ensure better test coverage to expose this - * kind of RT kernel problem. This lockdep splat, however, can be suppressed - * by using DEFINE_WAIT_OVERRIDE_MAP() if it serves a useful purpose and the - * invalid PREEMPT_RT case has been taken care of. - */ -static inline struct vm_struct *kasan_find_vm_area(void *addr) -{ - static DEFINE_WAIT_OVERRIDE_MAP(vmalloc_map, LD_WAIT_SLEEP); - struct vm_struct *va; - - if (IS_ENABLED(CONFIG_PREEMPT_RT)) - return NULL; - - /* - * Suppress lockdep warning and fetch vmalloc area of the - * offending address. - */ - lock_map_acquire_try(&vmalloc_map); - va = find_vm_area(addr); - lock_map_release(&vmalloc_map); - return va; -} - static void print_address_description(void *addr, u8 tag, struct kasan_report_info *info) { @@ -429,19 +399,8 @@ static void print_address_description(vo } if (is_vmalloc_addr(addr)) { - struct vm_struct *va = kasan_find_vm_area(addr); - - if (va) { - pr_err("The buggy address belongs to the virtual mapping at\n" - " [%px, %px) created by:\n" - " %pS\n", - va->addr, va->addr + va->size, va->caller); - pr_err("\n"); - - page = vmalloc_to_page(addr); - } else { - pr_err("The buggy address %px belongs to a vmalloc virtual mapping\n", addr); - } + pr_err("The buggy address %px belongs to a vmalloc virtual mapping\n", addr); + page = vmalloc_to_page(addr); } if (page) { _ Patches currently in -mm which might be from yeoreum.yun(a)arm.com are kasan-remove-kasan_find_vm_area-to-prevent-possible-deadlock.patch

4 months, 2 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2025