June 2025 - Linux-stable-mirror

[PATCH 2/2] PCI: Fix pdev_resources_assignable() disparity

by Ilpo Järvinen

pdev_sort_resources() uses pdev_resources_assignable() helper to decide if device's resources cannot be assigned. pbus_size_mem(), on the other hand, does not do the same check. This could lead into a situation where a resource ends up on realloc_head list but is not on the head list, which is turn prevents emptying the resource from the realloc_head list in __assign_resources_sorted(). A non-empty realloc_head is unacceptable because it triggers an internal sanity check as show in this log with a device that has class 0 (PCI_CLASS_NOT_DEFINED): pci 0001:01:00.0: [144d:a5a5] type 00 class 0x000000 PCIe Endpoint pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x000fffff 64bit] pci 0001:01:00.0: ROM [mem 0x00000000-0x0000ffff pref] pci 0001:01:00.0: enabling Extended Tags pci 0001:01:00.0: PME# supported from D0 D3hot D3cold pci 0001:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0001:00:00.0 (capable of 31.506 Gb/s with 16.0 GT/s PCIe x2 link) pcieport 0001:00:00.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01-ff] add_size 100000 add_align 100000 pcieport 0001:00:00.0: bridge window [mem 0x40000000-0x401fffff]: assigned ------------[ cut here ]------------ kernel BUG at drivers/pci/setup-bus.c:2532! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP ... Call trace: pci_assign_unassigned_bus_resources+0x110/0x114 (P) pci_rescan_bus+0x28/0x48 Use pdev_resources_assignable() also within pbus_size_mem() to skip processing of non-assignable resources which removes the disparity in between what resources pdev_sort_resources() and pbus_size_mem() consider. As non-assignable resources are no longer processed, they are not added to the realloc_head list, thus the sanity check no longer triggers. This disparity problem is very old but only now became apparent after the commit 2499f5348431 ("PCI: Rework optional resource handling") that made the ROM resources optional when calculating bridge window sizes which required adding the resource to the realloc_head list. Previously, bridge windows were just sized larger than necessary. Fixes: 2499f5348431 ("PCI: Rework optional resource handling") Reported-by: Tudor Ambarus <tudor.ambarus(a)linaro.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> --- The reporter was perhaps not happy with this fix as behavior of PCI core isn't identical after this fix even if this patch fixes the problem on the PCI core side which causes the internal sanity check to fire. It seems that in the reporter's case, an out-of-tree driver was involved that performed things and made assumptions a driver should not do in its probe function such as assuming a bridge window is assigned even if there are not child resources to be put into it (the child device in reporter's case doesn't have a valid class and gets therefore skipped by the resource fitting/assignment): https://lore.kernel.org/all/bd579412-d07c-476d-8932-55c1f69adc9f@linaro.org/ In other words, the out-of-tree driver relies on the disparity in the PCI core's resource fitting code which is now eliminated by this fix. drivers/pci/setup-bus.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index f90d49cd07da..24863d8d0053 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1191,6 +1191,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, resource_size_t r_size; if (r->parent || (r->flags & IORESOURCE_PCI_FIXED) || + !pdev_resources_assignable(dev) || ((r->flags & mask) != type && (r->flags & mask) != type2 && (r->flags & mask) != type3)) -- 2.39.5

6 months, 1 week

2
1
0 0

[PATCH 5.10] blk-mq: Fix kmemleak in blk_mq_init_allocated_queue

by Denis Arefev

From: Chen Jun <chenjun102(a)huawei.com> commit 943f45b9399ed8b2b5190cbc797995edaa97f58f upstream. There is a kmemleak caused by modprobe null_blk.ko unreferenced object 0xffff8881acb1f000 (size 1024): comm "modprobe", pid 836, jiffies 4294971190 (age 27.068s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 00 53 99 9e ff ff ff ff .........S...... backtrace: [<000000004a10c249>] kmalloc_node_trace+0x22/0x60 [<00000000648f7950>] blk_mq_alloc_and_init_hctx+0x289/0x350 [<00000000af06de0e>] blk_mq_realloc_hw_ctxs+0x2fe/0x3d0 [<00000000e00c1872>] blk_mq_init_allocated_queue+0x48c/0x1440 [<00000000d16b4e68>] __blk_mq_alloc_disk+0xc8/0x1c0 [<00000000d10c98c3>] 0xffffffffc450d69d [<00000000b9299f48>] 0xffffffffc4538392 [<0000000061c39ed6>] do_one_initcall+0xd0/0x4f0 [<00000000b389383b>] do_init_module+0x1a4/0x680 [<0000000087cf3542>] load_module+0x6249/0x7110 [<00000000beba61b8>] __do_sys_finit_module+0x140/0x200 [<00000000fdcfff51>] do_syscall_64+0x35/0x80 [<000000003c0f1f71>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 That is because q->ma_ops is set to NULL before blk_release_queue is called. blk_mq_init_queue_data blk_mq_init_allocated_queue blk_mq_realloc_hw_ctxs for (i = 0; i < set->nr_hw_queues; i++) { old_hctx = xa_load(&q->hctx_table, i); if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1] if (!old_hctx) break; xa_for_each_start(&q->hctx_table, j, hctx, j) blk_mq_exit_hctx(q, set, hctx, j); [2] if (!q->nr_hw_queues) [3] goto err_hctxs; err_exit: q->mq_ops = NULL; [4] blk_put_queue blk_release_queue if (queue_is_mq(q)) [5] blk_mq_release(q); [1]: blk_mq_alloc_and_init_hctx failed at i != 0. [2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and will be cleaned up in blk_mq_release. [3]: q->nr_hw_queues is 0. [4]: Set q->mq_ops to NULL. [5]: queue_is_mq returns false due to [4]. And blk_mq_release will not be called. The hctxs in q->unused_hctx_list are leaked. To fix it, call blk_release_queue in exception path. Fixes: 2f8f1336a48b ("blk-mq: always free hctx after request queue is freed") Signed-off-by: Yuan Can <yuancan(a)huawei.com> Signed-off-by: Chen Jun <chenjun102(a)huawei.com> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Link: https://lore.kernel.org/r/20221031031242.94107-1-chenjun102@huawei.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> [Denis: minor fix to resolve merge conflict.] Signed-off-by: Denis Arefev <arefev(a)swemel.ru> --- Backport fix for CVE-2022-49901 Link: https://nvd.nist.gov/vuln/detail/CVE-2022-49901 --- block/blk-mq.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 21531aa163cb..6dd1398d0301 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -3335,9 +3335,8 @@ struct request_queue *blk_mq_init_allocated_queue(struct blk_mq_tag_set *set, return q; err_hctxs: - kfree(q->queue_hw_ctx); - q->nr_hw_queues = 0; - blk_mq_sysfs_deinit(q); + blk_mq_release(q); + err_poll: blk_stat_free_callback(q->poll_cb); q->poll_cb = NULL; -- 2.43.0

6 months, 1 week

1
0
0 0

[PATCH] usb: hub: fix detection of high tier USB3 devices behind suspended hubs

by Mathias Nyman

USB3 devices connected behind several external suspended hubs may not be detected when plugged in due to aggressive hub runtime pm suspend. The hub driver immediately runtime-suspends hubs if there are no active children or port activity. There is a delay between the wake signal causing hub resume, and driver visible port activity on the hub downstream facing ports. Most of the LFPS handshake, resume signaling and link training done on the downstream ports is not visible to the hub driver until completed, when device then will appear fully enabled and running on the port. This delay between wake signal and detectable port change is even more significant with chained suspended hubs where the wake signal will propagate upstream first. Suspended hubs will only start resuming downstream ports after upstream facing port resumes. The hub driver may resume a USB3 hub, read status of all ports, not yet see any activity, and runtime suspend back the hub before any port activity is visible. This exact case was seen when conncting USB3 devices to a suspended Thunderbolt dock. USB3 specification defines a 100ms tU3WakeupRetryDelay, indicating USB3 devices expect to be resumed within 100ms after signaling wake. if not then device will resend the wake signal. Give the USB3 hubs twice this time (200ms) to detect any port changes after resume, before allowing hub to runtime suspend again. Cc: stable(a)vger.kernel.org Fixes: 596d789a211d ("USB: set hub's default autosuspend delay as 0") Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/core/hub.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 770d1e91183c..5c12dfdef569 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -68,6 +68,12 @@ */ #define USB_SHORT_SET_ADDRESS_REQ_TIMEOUT 500 /* ms */ +/* + * Give SS hubs 200ms time after wake to train downstream links before + * assuming no port activity and allowing hub to runtime suspend back. + */ +#define USB_SS_PORT_U0_WAKE_TIME 200 /* ms */ + /* Protect struct usb_device->state and ->children members * Note: Both are also protected by ->dev.sem, except that ->state can * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */ @@ -1068,11 +1074,12 @@ int usb_remove_device(struct usb_device *udev) enum hub_activation_type { HUB_INIT, HUB_INIT2, HUB_INIT3, /* INITs must come first */ - HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, + HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, HUB_POST_RESUME, }; static void hub_init_func2(struct work_struct *ws); static void hub_init_func3(struct work_struct *ws); +static void hub_post_resume(struct work_struct *ws); static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) { @@ -1095,6 +1102,13 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) goto init2; goto init3; } + + if (type == HUB_POST_RESUME) { + usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); + hub_put(hub); + return; + } + hub_get(hub); /* The superspeed hub except for root hub has to use Hub Depth @@ -1343,6 +1357,16 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) device_unlock(&hdev->dev); } + if (type == HUB_RESUME && hub_is_superspeed(hub->hdev)) { + /* give usb3 downstream links training time after hub resume */ + INIT_DELAYED_WORK(&hub->init_work, hub_post_resume); + queue_delayed_work(system_power_efficient_wq, &hub->init_work, + msecs_to_jiffies(USB_SS_PORT_U0_WAKE_TIME)); + usb_autopm_get_interface_no_resume( + to_usb_interface(hub->intfdev)); + return; + } + hub_put(hub); } @@ -1361,6 +1385,13 @@ static void hub_init_func3(struct work_struct *ws) hub_activate(hub, HUB_INIT3); } +static void hub_post_resume(struct work_struct *ws) +{ + struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work); + + hub_activate(hub, HUB_POST_RESUME); +} + enum hub_quiescing_type { HUB_DISCONNECT, HUB_PRE_RESET, HUB_SUSPEND }; -- 2.43.0

6 months, 1 week

3
3
0 0

[PATCH 5.10] lib/generic-radix-tree.c: Don't overflow in peek()

by Denis Arefev

From: Kent Overstreet <kent.overstreet(a)gmail.com> commit 9492261ff2460252cf2d8de89cdf854c7e2b28a0 upstream. When we started spreading new inode numbers throughout most of the 64 bit inode space, that triggered some corner case bugs, in particular some integer overflows related to the radix tree code. Oops. Fixes: ba20ba2e3743 ("generic radix trees") Signed-off-by: Kent Overstreet <kent.overstreet(a)gmail.com> [Denis: minor fix to resolve merge conflict and add tag Fixes] Signed-off-by: Denis Arefev <arefev(a)swemel.ru> --- Backport fix for CVE-2021-47432 Link: https://nvd.nist.gov/vuln/detail/cve-2021-47432 --- include/linux/generic-radix-tree.h | 7 +++++++ lib/generic-radix-tree.c | 17 ++++++++++++++--- 2 files changed, 21 insertions(+), 3 deletions(-) diff --git a/include/linux/generic-radix-tree.h b/include/linux/generic-radix-tree.h index bfd00320c7f3..0e7abc635e5f 100644 --- a/include/linux/generic-radix-tree.h +++ b/include/linux/generic-radix-tree.h @@ -39,6 +39,7 @@ #include <asm/page.h> #include <linux/bug.h> #include <linux/kernel.h> +#include <linux/limits.h> #include <linux/log2.h> struct genradix_root; @@ -183,6 +184,12 @@ void *__genradix_iter_peek(struct genradix_iter *, struct __genradix *, size_t); static inline void __genradix_iter_advance(struct genradix_iter *iter, size_t obj_size) { + if (iter->offset + obj_size < iter->offset) { + iter->offset = SIZE_MAX; + iter->pos = SIZE_MAX; + return; + } + iter->offset += obj_size; if (!is_power_of_2(obj_size) && diff --git a/lib/generic-radix-tree.c b/lib/generic-radix-tree.c index 34d3ac52de89..78f081d695d0 100644 --- a/lib/generic-radix-tree.c +++ b/lib/generic-radix-tree.c @@ -168,6 +168,10 @@ void *__genradix_iter_peek(struct genradix_iter *iter, struct genradix_root *r; struct genradix_node *n; unsigned level, i; + + if (iter->offset == SIZE_MAX) + return NULL; + restart: r = READ_ONCE(radix->root); if (!r) @@ -186,10 +190,17 @@ void *__genradix_iter_peek(struct genradix_iter *iter, (GENRADIX_ARY - 1); while (!n->children[i]) { + size_t objs_per_ptr = genradix_depth_size(level); + + if (iter->offset + objs_per_ptr < iter->offset) { + iter->offset = SIZE_MAX; + iter->pos = SIZE_MAX; + return NULL; + } + i++; - iter->offset = round_down(iter->offset + - genradix_depth_size(level), - genradix_depth_size(level)); + iter->offset = round_down(iter->offset + objs_per_ptr, + objs_per_ptr); iter->pos = (iter->offset >> PAGE_SHIFT) * objs_per_page; if (i == GENRADIX_ARY) -- 2.43.0

6 months, 1 week

1
0
0 0

[PATCH v8 1/4] serial: 8250: fix panic due to PSLVERR

by Yunhui Cui

When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui <cuiyunhui(a)bytedance.com> Cc: stable(a)vger.kernel.org --- drivers/tty/serial/8250/8250_port.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 6d7b8c4667c9c..07fe818dffa34 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2376,9 +2376,10 @@ int serial8250_do_startup(struct uart_port *port) /* * Now, initialize the UART */ - serial_port_out(port, UART_LCR, UART_LCR_WLEN8); uart_port_lock_irqsave(port, &flags); + serial_port_out(port, UART_LCR, UART_LCR_WLEN8); + if (up->port.flags & UPF_FOURPORT) { if (!up->port.irq) up->port.mctrl |= TIOCM_OUT1; -- 2.39.5

6 months, 1 week

5
9
0 0

[PATCH 0/3] clk: samsung: gs101 & exynos850 fixes

by André Draszik

Hi, The patches fix some errors in the gs101 clock driver as well as a trivial comment typo in the Exynos E850 clock driver. Cheers, Andre Signed-off-by: André Draszik <andre.draszik(a)linaro.org> --- André Draszik (3): clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock clk: samsung: exynos850: fix a comment drivers/clk/samsung/clk-exynos850.c | 2 +- drivers/clk/samsung/clk-gs101.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) --- base-commit: a0bea9e39035edc56a994630e6048c8a191a99d8 change-id: 20250519-samsung-clk-fixes-a4f5bfb54c73 Best regards, -- André Draszik <andre.draszik(a)linaro.org>

6 months, 1 week

2
4
0 0

[PATCH] uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again

by Thomas Weißschuh

Commit 1e7933a575ed ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"") did not take in account that the usage of BITS_PER_LONG in __GENMASK() was changed to __BITS_PER_LONG for UAPI-safety in commit 3c7a8e190bc5 ("uapi: introduce uapi-friendly macros for GENMASK"). BITS_PER_LONG can not be used in UAPI headers as it derives from the kernel configuration and not from the current compiler invocation. When building compat userspace code or a compat vDSO its value will be incorrect. Switch back to __BITS_PER_LONG. Fixes: 1e7933a575ed ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"") Cc: stable(a)vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- include/uapi/linux/bits.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/uapi/linux/bits.h b/include/uapi/linux/bits.h index 682b406e10679dc8baa188830ab0811e7e3e13e3..a04afef9efca42f062e142fcb33f5d267512b1e5 100644 --- a/include/uapi/linux/bits.h +++ b/include/uapi/linux/bits.h @@ -4,9 +4,9 @@ #ifndef _UAPI_LINUX_BITS_H #define _UAPI_LINUX_BITS_H -#define __GENMASK(h, l) (((~_UL(0)) << (l)) & (~_UL(0) >> (BITS_PER_LONG - 1 - (h)))) +#define __GENMASK(h, l) (((~_UL(0)) << (l)) & (~_UL(0) >> (__BITS_PER_LONG - 1 - (h)))) -#define __GENMASK_ULL(h, l) (((~_ULL(0)) << (l)) & (~_ULL(0) >> (BITS_PER_LONG_LONG - 1 - (h)))) +#define __GENMASK_ULL(h, l) (((~_ULL(0)) << (l)) & (~_ULL(0) >> (__BITS_PER_LONG_LONG - 1 - (h)))) #define __GENMASK_U128(h, l) \ ((_BIT128((h)) << 1) - (_BIT128(l))) --- base-commit: e271ed52b344ac02d4581286961d0c40acc54c03 change-id: 20250606-uapi-genmask-e07667de69ec Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

6 months, 1 week

3
4
0 0

[PATCH AUTOSEL 6.1 1/9] cifs: Correctly set SMB1 SessionKey field in Session Setup Request

by Sasha Levin

From: Pali Rohár <pali(a)kernel.org> [ Upstream commit 89381c72d52094988e11d23ef24a00066a0fa458 ] [MS-CIFS] specification in section 2.2.4.53.1 where is described SMB_COM_SESSION_SETUP_ANDX Request, for SessionKey field says: The client MUST set this field to be equal to the SessionKey field in the SMB_COM_NEGOTIATE Response for this SMB connection. Linux SMB client currently set this field to zero. This is working fine against Windows NT SMB servers thanks to [MS-CIFS] product behavior <94>: Windows NT Server ignores the client's SessionKey. For compatibility with [MS-CIFS], set this SessionKey field in Session Setup Request to value retrieved from Negotiate response. Signed-off-by: Pali Rohár <pali(a)kernel.org> Signed-off-by: Steve French <stfrench(a)microsoft.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- Based on my comprehensive analysis of both the commit message and code changes, examining the current kernel tree context: **YES** ## Extensive Analysis ### **Nature of the Fix** This is a **specification compliance fix** for SMB1 protocol handling. The commit addresses a clear violation of the MS-CIFS specification section 2.2.4.53.1, which mandates that the SessionKey field in SMB_COM_SESSION_SETUP_ANDX Request must be set to the value from the SMB_COM_NEGOTIATE Response. ### **Code Changes Analysis** **1. Structural Changes (Low Risk)** - **cifsglob.h**: Adds `__le32 session_key_id` to `TCP_Server_Info` structure - minimal ABI impact as this is kernel-internal - **cifspdu.h**: Corrects endianness annotations from `__u32` to `__le32` - pure annotation fix, no behavioral change **2. Functional Changes (Contained and Safe)** - **cifssmb.c**: Captures SessionKey from negotiate response (`server->session_key_id = pSMBr->SessionKey`) - simple field assignment - **sess.c**: Sets SessionKey in session setup request (`pSMB->req.SessionKey = server->session_key_id`) - follows specification requirement ### **Risk Assessment** **Minimal Regression Risk:** - Changes are isolated to SMB1 legacy protocol code - Current behavior (setting SessionKey to zero) works with Windows NT due to MS- CIFS product behavior <94> - New behavior follows specification exactly, improving compatibility with non-Windows SMB1 servers - No security implications - purely a protocol compliance improvement **Code Maturity:** - SMB1 session setup code is very mature and stable - Limited recent changes in this area except compatibility fixes - Well- understood code path with clear specification backing ### **Backport Suitability Criteria Met** **1. Important Bug Fix:** ✅ Fixes protocol specification violation that could cause compatibility issues with strict SMB1 implementations **2. Small and Contained:** ✅ Four minimal changes across related files, all implementing the same specification requirement **3. Clear Side Effects:** ✅ No side effects beyond fixing the specification compliance issue **4. No Architectural Changes:** ✅ Simple field additions and assignments, no structural changes **5. Non- Critical Subsystem:** ✅ Legacy SMB1 protocol code, deprecated since 2017 **6. Minimal Risk:** ✅ Maintains backward compatibility while improving forward compatibility **7. Stable Tree Rules Compliance:** ✅ Important compatibility bugfix with minimal regression risk ### **Comparison to Similar Commits** This commit closely matches the pattern of **Similar Commit #3** and **Similar Commit #5** (both marked YES for backporting): - Protocol compliance improvements - Session setup related fixes - Clear specification backing - Minimal, contained changes - Authored by maintainers (Steve French involvement) ### **Conclusion** This commit represents an ideal stable backport candidate: a clear specification compliance fix with minimal code changes, no security implications, and improvement in interoperability. The fix ensures Linux kernel SMB client properly follows MS-CIFS specification, which is valuable for enterprise environments using diverse SMB1 server implementations. fs/smb/client/cifsglob.h | 1 + fs/smb/client/cifspdu.h | 6 +++--- fs/smb/client/cifssmb.c | 1 + fs/smb/client/sess.c | 1 + 4 files changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h index 17fce0afb297f..9c5aa646b8cc8 100644 --- a/fs/smb/client/cifsglob.h +++ b/fs/smb/client/cifsglob.h @@ -675,6 +675,7 @@ struct TCP_Server_Info { char workstation_RFC1001_name[RFC1001_NAME_LEN_WITH_NULL]; __u32 sequence_number; /* for signing, protected by srv_mutex */ __u32 reconnect_instance; /* incremented on each reconnect */ + __le32 session_key_id; /* retrieved from negotiate response and send in session setup request */ struct session_key session_key; unsigned long lstrp; /* when we got last response from this server */ struct cifs_secmech secmech; /* crypto sec mech functs, descriptors */ diff --git a/fs/smb/client/cifspdu.h b/fs/smb/client/cifspdu.h index 9cb4577063344..a682c50d7ace4 100644 --- a/fs/smb/client/cifspdu.h +++ b/fs/smb/client/cifspdu.h @@ -557,7 +557,7 @@ typedef union smb_com_session_setup_andx { __le16 MaxBufferSize; __le16 MaxMpxCount; __le16 VcNumber; - __u32 SessionKey; + __le32 SessionKey; __le16 SecurityBlobLength; __u32 Reserved; __le32 Capabilities; /* see below */ @@ -576,7 +576,7 @@ typedef union smb_com_session_setup_andx { __le16 MaxBufferSize; __le16 MaxMpxCount; __le16 VcNumber; - __u32 SessionKey; + __le32 SessionKey; __le16 CaseInsensitivePasswordLength; /* ASCII password len */ __le16 CaseSensitivePasswordLength; /* Unicode password length*/ __u32 Reserved; /* see below */ @@ -614,7 +614,7 @@ typedef union smb_com_session_setup_andx { __le16 MaxBufferSize; __le16 MaxMpxCount; __le16 VcNumber; - __u32 SessionKey; + __le32 SessionKey; __le16 PasswordLength; __u32 Reserved; /* encrypt key len and offset */ __le16 ByteCount; diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c index 6077fe1dcc9ce..0c6ade1968947 100644 --- a/fs/smb/client/cifssmb.c +++ b/fs/smb/client/cifssmb.c @@ -469,6 +469,7 @@ CIFSSMBNegotiate(const unsigned int xid, server->max_rw = le32_to_cpu(pSMBr->MaxRawSize); cifs_dbg(NOISY, "Max buf = %d\n", ses->server->maxBuf); server->capabilities = le32_to_cpu(pSMBr->Capabilities); + server->session_key_id = pSMBr->SessionKey; server->timeAdj = (int)(__s16)le16_to_cpu(pSMBr->ServerTimeZone); server->timeAdj *= 60; diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c index c8f7ae0a20064..883d1cb1fc8b0 100644 --- a/fs/smb/client/sess.c +++ b/fs/smb/client/sess.c @@ -605,6 +605,7 @@ static __u32 cifs_ssetup_hdr(struct cifs_ses *ses, USHRT_MAX)); pSMB->req.MaxMpxCount = cpu_to_le16(server->maxReq); pSMB->req.VcNumber = cpu_to_le16(1); + pSMB->req.SessionKey = server->session_key_id; /* Now no need to set SMBFLG_CASELESS or obsolete CANONICAL PATH */ -- 2.39.5

6 months, 1 week

3
10
0 0

[PATCH net] netrom: fix possible deadlock in nr_rt_device_down

by Denis Arefev

Syzkaller detected a possible deadlock in nr_rt_device_down [1] Locking in concurrent threads can cause deadlock. CPU0 ---- nr_rt_device_down() |-> spin_lock_bh(&nr_neigh_list_lock); capture . . . |-> spin_lock_bh(&nr_node_list_lock); waiting and deadlock CPU1 ---- nr_del_node() |-> spin_lock_bh(&nr_node_list_lock); capture . . . |-> nr_remove_neigh(nr_neigh); |-> spin_lock_bh(&nr_neigh_list_lock); waiting for capture Make sure we always get nr_neigh_list_lock before nr_node_list_lock. [1] WARNING: possible circular locking dependency detected 6.15.0-rc2-syzkaller-00278-gfc96b232f8e7 #0 Not tainted ------------------------------------------------------ syz-executor107/6105 is trying to acquire lock: ffffffff902543b8 (nr_node_list_lock){+...}-{3:3}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffffffff902543b8 (nr_node_list_lock){+...}-{3:3}, at: nr_rt_device_down+0xb5/0x7b0 net/netrom/nr_route.c:517 but task is already holding lock: ffffffff90254358 (nr_neigh_list_lock){+...}-{3:3}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] ffffffff90254358 (nr_neigh_list_lock){+...}-{3:3}, at: nr_rt_device_down+0x28/0x7b0 net/netrom/nr_route.c:514 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (nr_neigh_list_lock){+...}-{3:3}: lock_acquire+0x116/0x2f0 kernel/locking/lockdep.c:5866 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_remove_neigh net/netrom/nr_route.c:307 [inline] nr_dec_obs net/netrom/nr_route.c:472 [inline] nr_rt_ioctl+0x39a/0xff0 net/netrom/nr_route.c:692 sock_do_ioctl+0x152/0x400 net/socket.c:1190 sock_ioctl+0x644/0x900 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (&nr_node->node_lock){+...}-{3:3}: lock_acquire+0x116/0x2f0 kernel/locking/lockdep.c:5866 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_node_lock include/net/netrom.h:152 [inline] nr_dec_obs net/netrom/nr_route.c:459 [inline] nr_rt_ioctl+0x194/0xff0 net/netrom/nr_route.c:692 sock_do_ioctl+0x152/0x400 net/socket.c:1190 sock_ioctl+0x644/0x900 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (nr_node_list_lock){+...}-{3:3}: check_prev_add kernel/locking/lockdep.c:3166 [inline] check_prevs_add kernel/locking/lockdep.c:3285 [inline] validate_chain+0xa69/0x24e0 kernel/locking/lockdep.c:3909 __lock_acquire+0xad5/0xd80 kernel/locking/lockdep.c:5235 lock_acquire+0x116/0x2f0 kernel/locking/lockdep.c:5866 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_rt_device_down+0xb5/0x7b0 net/netrom/nr_route.c:517 nr_device_event+0x134/0x150 net/netrom/af_netrom.c:126 notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85 __dev_notify_flags+0x209/0x410 net/core/dev.c:-1 netif_change_flags+0xf0/0x1a0 net/core/dev.c:9434 dev_change_flags+0x146/0x270 net/core/dev_api.c:68 dev_ioctl+0x80f/0x1260 net/core/dev_ioctl.c:821 sock_do_ioctl+0x22f/0x400 net/socket.c:1204 sock_ioctl+0x644/0x900 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: nr_node_list_lock --> &nr_node->node_lock --> nr_neigh_list_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(nr_neigh_list_lock); lock(&nr_node->node_lock); lock(nr_neigh_list_lock); lock(nr_node_list_lock); *** DEADLOCK *** 2 locks held by syz-executor107/6105: #0: ffffffff900fd788 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_net_lock include/linux/rtnetlink.h:130 [inline] #0: ffffffff900fd788 (rtnl_mutex){+.+.}-{4:4}, at: dev_ioctl+0x7fd/0x1260 net/core/dev_ioctl.c:820 #1: ffffffff90254358 (nr_neigh_list_lock){+...}-{3:3}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #1: ffffffff90254358 (nr_neigh_list_lock){+...}-{3:3}, at: nr_rt_device_down+0x28/0x7b0 net/netrom/nr_route.c:514 stack backtrace: CPU: 0 UID: 0 PID: 6105 Comm: syz-executor107 Not tainted 6.15.0-rc2-syzkaller-00278-gfc96b232f8e7 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x2e1/0x300 kernel/locking/lockdep.c:2079 check_noncircular+0x142/0x160 kernel/locking/lockdep.c:2211 check_prev_add kernel/locking/lockdep.c:3166 [inline] check_prevs_add kernel/locking/lockdep.c:3285 [inline] validate_chain+0xa69/0x24e0 kernel/locking/lockdep.c:3909 __lock_acquire+0xad5/0xd80 kernel/locking/lockdep.c:5235 lock_acquire+0x116/0x2f0 kernel/locking/lockdep.c:5866 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x35/0x50 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] nr_rt_device_down+0xb5/0x7b0 net/netrom/nr_route.c:517 nr_device_event+0x134/0x150 net/netrom/af_netrom.c:126 notifier_call_chain+0x1a5/0x3f0 kernel/notifier.c:85 __dev_notify_flags+0x209/0x410 net/core/dev.c:-1 netif_change_flags+0xf0/0x1a0 net/core/dev.c:9434 dev_change_flags+0x146/0x270 net/core/dev_api.c:68 dev_ioctl+0x80f/0x1260 net/core/dev_ioctl.c:821 sock_do_ioctl+0x22f/0x400 net/socket.c:1204 sock_ioctl+0x644/0x900 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf1/0x160 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x210 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable(a)vger.kernel.org Reported-by: syzbot+ccdfb85a561b973219c7(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ccdfb85a561b973219c7 Signed-off-by: Denis Arefev <arefev(a)swemel.ru> --- net/netrom/nr_route.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c index b94cb2ffbaf8..aae0923dbcf0 100644 --- a/net/netrom/nr_route.c +++ b/net/netrom/nr_route.c @@ -331,6 +331,7 @@ static int nr_del_node(ax25_address *callsign, ax25_address *neighbour, struct n return -EINVAL; } + spin_lock_bh(&nr_neigh_list_lock); spin_lock_bh(&nr_node_list_lock); nr_node_lock(nr_node); for (i = 0; i < nr_node->count; i++) { @@ -339,7 +340,7 @@ static int nr_del_node(ax25_address *callsign, ax25_address *neighbour, struct n nr_neigh_put(nr_neigh); if (nr_neigh->count == 0 && !nr_neigh->locked) - nr_remove_neigh(nr_neigh); + nr_remove_neigh_locked(nr_neigh); nr_neigh_put(nr_neigh); nr_node->count--; @@ -361,13 +362,14 @@ static int nr_del_node(ax25_address *callsign, ax25_address *neighbour, struct n } nr_node_unlock(nr_node); spin_unlock_bh(&nr_node_list_lock); - + spin_unlock_bh(&nr_neigh_list_lock); return 0; } } nr_neigh_put(nr_neigh); nr_node_unlock(nr_node); spin_unlock_bh(&nr_node_list_lock); + spin_unlock_bh(&nr_neigh_list_lock); nr_node_put(nr_node); return -EINVAL; -- 2.43.0

6 months, 1 week

2
1
0 0

[PATCH AUTOSEL 5.4 1/3] ALSA: hda: Ignore unsol events for cards being shut down

by Sasha Levin

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 3f100f524e75586537e337b34d18c8d604b398e7 ] For the classic snd_hda_intel driver, codec->card and bus->card point to the exact same thing. When snd_card_diconnect() fires, bus->shutdown is set thanks to azx_dev_disconnect(). card->shutdown is already set when that happens but both provide basically the same functionality. For the DSP snd_soc_avs driver where multiple codecs are located on multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec card may be unregistered while other codecs are still operational. Proper check in form of card->shutdown must be used to verify whether the codec's card is being shut down. Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Link: https://patch.msgid.link/20250530141309.2943404-1-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- **YES** This commit should be backported to stable kernel trees. Here's my extensive analysis: ## Technical Analysis ### Core Problem Being Fixed The commit addresses a **shutdown race condition** in multi-codec HDA systems, specifically in DSP/AVS drivers where multiple HDA codecs exist on the same sound card but with separate bus instances. The change modifies line 47 in `sound/pci/hda/hda_bind.c`: **Before:** ```c if (codec->bus->shutdown) return; ``` **After:** ```c if (codec->card->shutdown || codec->bus->shutdown) return; ``` ### Why This is a Good Backport Candidate **1. Bug Fix Nature - Small and Contained** - This is a clear **bug fix** addressing a specific shutdown race condition - The change is **minimal** (adding one condition check) and **well- contained** - No architectural changes or new features introduced - Low risk of introducing regressions **2. Critical Subsystem Impact** - Affects **HD-audio subsystem** which is critical for audio functionality - Could prevent system crashes or hangs during shutdown in multi-codec scenarios - Improves system stability during shutdown sequences **3. Technical Correctness** The fix addresses a **fundamental timing issue**: - In multi-codec systems, `card->shutdown` is set at the ALSA core level during `snd_card_disconnect()` - `bus->shutdown` is set later at the HDA controller level during individual codec shutdown - **Gap exists** where unsol events could be processed after card shutdown but before bus shutdown - This can cause codec operations on an already-disconnected sound card **4. Follows Stable Tree Criteria** - **Important bug fix**: Prevents potential system instability during shutdown - **Minimal risk**: Only adds an additional safety check, doesn't change existing logic - **Well-understood**: The change is straightforward and follows existing patterns seen in similar commits - **Confined to subsystem**: Only affects HDA audio subsystem **5. Consistency with Similar Backported Commits** This follows the exact same pattern as the historical commits that were successfully backported: - **Similar Commit #1**: Added `bus->shutdown` check to prevent unsol events during shutdown - **Backported (YES)** - **Similar Commit #2**: Added suspend/resume state check to unsol handler - **Backported (YES)** - **Similar Commit #3**: Added jack disconnection during codec unbind - **Backported (YES)** - **Similar Commit #4**: Added bus_probing flag to serialize codec registration - **Backported (YES)** All these commits follow the same pattern: **small, targeted fixes to prevent race conditions in HDA shutdown/initialization sequences**. **6. Real-World Impact** - Affects **DSP/AVS audio systems** which are increasingly common in modern hardware - Without this fix, systems with multiple audio codecs could experience: - Kernel oops during shutdown - System hangs - Audio subsystem corruption - Unpredictable behavior during reboot sequences ### Risk Assessment **Very Low Risk:** - The change only **adds** a safety check, doesn't remove existing functionality - `card->shutdown` check is used extensively throughout the ALSA subsystem already - Maintains **backward compatibility** completely - If `card->shutdown` is false, behavior is identical to before - No changes to data structures, APIs, or functional logic ### Conclusion This commit represents a **textbook stable backport candidate**: it's a small, well-understood bug fix that addresses a real stability issue in a critical subsystem with minimal risk of regression. The pattern matches multiple previously successful backports in the same subsystem, and the technical merit is clear. sound/pci/hda/hda_bind.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c index 17a25e453f60c..047fe6cca7f1a 100644 --- a/sound/pci/hda/hda_bind.c +++ b/sound/pci/hda/hda_bind.c @@ -44,7 +44,7 @@ static void hda_codec_unsol_event(struct hdac_device *dev, unsigned int ev) struct hda_codec *codec = container_of(dev, struct hda_codec, core); /* ignore unsol events during shutdown */ - if (codec->bus->shutdown) + if (codec->card->shutdown || codec->bus->shutdown) return; /* ignore unsol events during system suspend/resume */ -- 2.39.5

6 months, 1 week

1
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2025