May 2025 - Linux-stable-mirror

[PATCH 1/3] perf/arm-ni: Set initial IRQ affinity

by Robin Murphy

While we do request our IRQs with the right flags to stop their affinity changing unexpectedly, we forgot to actually set it to start with. Oops. Cc: stable(a)vger.kernel.org Fixes: 4d5a7680f2b4 ("perf: Add driver for Arm NI-700 interconnect PMU") Signed-off-by: Robin Murphy <robin.murphy(a)arm.com> --- drivers/perf/arm-ni.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/perf/arm-ni.c b/drivers/perf/arm-ni.c index de7b6cce4d68..9396d243415f 100644 --- a/drivers/perf/arm-ni.c +++ b/drivers/perf/arm-ni.c @@ -544,6 +544,8 @@ static int arm_ni_init_cd(struct arm_ni *ni, struct arm_ni_node *node, u64 res_s return err; cd->cpu = cpumask_local_spread(0, dev_to_node(ni->dev)); + irq_set_affinity(cd->irq, cpumask_of(cd->cpu)); + cd->pmu = (struct pmu) { .module = THIS_MODULE, .parent = ni->dev, -- 2.39.2.101.g768bb238c484.dirty

3 months, 4 weeks

1
0
0 0

[PATCH v2 3/3] can: kvaser_pciefd: Continue parsing DMA buf after dropped RX

by Axel Forsman

Going bus-off on a channel doing RX could result in dropped packets. As netif_running() gets cleared before the channel abort procedure, the handling of any last RDATA packets would see netif_rx() return non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt with this "error" by breaking out of processing the remaining DMA RX buffer. Only return an error from kvaser_pciefd_read_buffer() due to packet corruption, otherwise handle it internally. Cc: stable(a)vger.kernel.org Signed-off-by: Axel Forsman <axfo(a)kvaser.com> Tested-by: Jimmy Assarsson <extja(a)kvaser.com> Reviewed-by: Jimmy Assarsson <extja(a)kvaser.com> --- drivers/net/can/kvaser_pciefd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index 6cb657018cdf..6b3b04b5a4c2 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1209,7 +1209,7 @@ static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie, skb = alloc_canfd_skb(priv->dev, &cf); if (!skb) { priv->dev->stats.rx_dropped++; - return -ENOMEM; + return 0; } cf->len = can_fd_dlc2len(dlc); @@ -1221,7 +1221,7 @@ static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie, skb = alloc_can_skb(priv->dev, (struct can_frame **)&cf); if (!skb) { priv->dev->stats.rx_dropped++; - return -ENOMEM; + return 0; } can_frame_set_cc_len((struct can_frame *)cf, dlc, priv->ctrlmode); } @@ -1239,7 +1239,9 @@ static int kvaser_pciefd_handle_data_packet(struct kvaser_pciefd *pcie, priv->dev->stats.rx_packets++; kvaser_pciefd_set_skb_timestamp(pcie, skb, p->timestamp); - return netif_rx(skb); + netif_rx(skb); + + return 0; } static void kvaser_pciefd_change_state(struct kvaser_pciefd_can *can, -- 2.47.2

3 months, 4 weeks

1
0
0 0

[PATCH v2 2/3] can: kvaser_pciefd: Fix echo_skb race conditions

by Axel Forsman

The functions kvaser_pciefd_start_xmit() and kvaser_pciefd_handle_ack_packet() raced to stop/wake TX queues and get/put echo skbs, as kvaser_pciefd_can->echo_lock was only ever taken when transmitting. E.g., this caused the following error: can_put_echo_skb: BUG! echo_skb 5 is occupied! Instead, use the synchronization helpers in netdev_queues.h. As those piggyback on BQL barriers, start updating in-flight packets and bytes counts as well. Cc: stable(a)vger.kernel.org Signed-off-by: Axel Forsman <axfo(a)kvaser.com> Tested-by: Jimmy Assarsson <extja(a)kvaser.com> Reviewed-by: Jimmy Assarsson <extja(a)kvaser.com> --- drivers/net/can/kvaser_pciefd.c | 91 +++++++++++++++++++++------------ 1 file changed, 57 insertions(+), 34 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index 4d84f7d13c6f..6cb657018cdf 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -16,6 +16,7 @@ #include <linux/netdevice.h> #include <linux/pci.h> #include <linux/timer.h> +#include <net/netdev_queues.h> MODULE_LICENSE("Dual BSD/GPL"); MODULE_AUTHOR("Kvaser AB <support(a)kvaser.com>"); @@ -410,10 +411,13 @@ struct kvaser_pciefd_can { void __iomem *reg_base; struct can_berr_counter bec; u8 cmd_seq; + u8 tx_max_count; + u8 tx_idx; + u8 ack_idx; int err_rep_cnt; - int echo_idx; + unsigned int completed_tx_pkts; + unsigned int completed_tx_bytes; spinlock_t lock; /* Locks sensitive registers (e.g. MODE) */ - spinlock_t echo_lock; /* Locks the message echo buffer */ struct timer_list bec_poll_timer; struct completion start_comp, flush_comp; }; @@ -714,6 +718,9 @@ static int kvaser_pciefd_open(struct net_device *netdev) int ret; struct kvaser_pciefd_can *can = netdev_priv(netdev); + can->tx_idx = 0; + can->ack_idx = 0; + ret = open_candev(netdev); if (ret) return ret; @@ -745,21 +752,26 @@ static int kvaser_pciefd_stop(struct net_device *netdev) del_timer(&can->bec_poll_timer); } can->can.state = CAN_STATE_STOPPED; + netdev_reset_queue(netdev); close_candev(netdev); return ret; } +static unsigned int kvaser_pciefd_tx_avail(const struct kvaser_pciefd_can *can) +{ + return can->tx_max_count - (READ_ONCE(can->tx_idx) - READ_ONCE(can->ack_idx)); +} + static int kvaser_pciefd_prepare_tx_packet(struct kvaser_pciefd_tx_packet *p, - struct kvaser_pciefd_can *can, + struct can_priv *can, u8 seq, struct sk_buff *skb) { struct canfd_frame *cf = (struct canfd_frame *)skb->data; int packet_size; - int seq = can->echo_idx; memset(p, 0, sizeof(*p)); - if (can->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) + if (can->ctrlmode & CAN_CTRLMODE_ONE_SHOT) p->header[1] |= KVASER_PCIEFD_TPACKET_SMS; if (cf->can_id & CAN_RTR_FLAG) @@ -782,7 +794,7 @@ static int kvaser_pciefd_prepare_tx_packet(struct kvaser_pciefd_tx_packet *p, } else { p->header[1] |= FIELD_PREP(KVASER_PCIEFD_RPACKET_DLC_MASK, - can_get_cc_dlc((struct can_frame *)cf, can->can.ctrlmode)); + can_get_cc_dlc((struct can_frame *)cf, can->ctrlmode)); } p->header[1] |= FIELD_PREP(KVASER_PCIEFD_PACKET_SEQ_MASK, seq); @@ -797,22 +809,24 @@ static netdev_tx_t kvaser_pciefd_start_xmit(struct sk_buff *skb, struct net_device *netdev) { struct kvaser_pciefd_can *can = netdev_priv(netdev); - unsigned long irq_flags; struct kvaser_pciefd_tx_packet packet; + unsigned int seq = can->tx_idx & (can->can.echo_skb_max - 1); + unsigned int frame_len; int nr_words; - u8 count; if (can_dev_dropped_skb(netdev, skb)) return NETDEV_TX_OK; + if (!netif_subqueue_maybe_stop(netdev, 0, kvaser_pciefd_tx_avail(can), 1, 1)) + return NETDEV_TX_BUSY; - nr_words = kvaser_pciefd_prepare_tx_packet(&packet, can, skb); + nr_words = kvaser_pciefd_prepare_tx_packet(&packet, &can->can, seq, skb); - spin_lock_irqsave(&can->echo_lock, irq_flags); /* Prepare and save echo skb in internal slot */ - can_put_echo_skb(skb, netdev, can->echo_idx, 0); - - /* Move echo index to the next slot */ - can->echo_idx = (can->echo_idx + 1) % can->can.echo_skb_max; + WRITE_ONCE(can->can.echo_skb[seq], NULL); + frame_len = can_skb_get_frame_len(skb); + can_put_echo_skb(skb, netdev, seq, frame_len); + netdev_sent_queue(netdev, frame_len); + WRITE_ONCE(can->tx_idx, can->tx_idx + 1); /* Write header to fifo */ iowrite32(packet.header[0], @@ -836,14 +850,7 @@ static netdev_tx_t kvaser_pciefd_start_xmit(struct sk_buff *skb, KVASER_PCIEFD_KCAN_FIFO_LAST_REG); } - count = FIELD_GET(KVASER_PCIEFD_KCAN_TX_NR_PACKETS_CURRENT_MASK, - ioread32(can->reg_base + KVASER_PCIEFD_KCAN_TX_NR_PACKETS_REG)); - /* No room for a new message, stop the queue until at least one - * successful transmit - */ - if (count >= can->can.echo_skb_max || can->can.echo_skb[can->echo_idx]) - netif_stop_queue(netdev); - spin_unlock_irqrestore(&can->echo_lock, irq_flags); + netif_subqueue_maybe_stop(netdev, 0, kvaser_pciefd_tx_avail(can), 1, 1); return NETDEV_TX_OK; } @@ -970,6 +977,8 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) can->kv_pcie = pcie; can->cmd_seq = 0; can->err_rep_cnt = 0; + can->completed_tx_pkts = 0; + can->completed_tx_bytes = 0; can->bec.txerr = 0; can->bec.rxerr = 0; @@ -983,11 +992,10 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) tx_nr_packets_max = FIELD_GET(KVASER_PCIEFD_KCAN_TX_NR_PACKETS_MAX_MASK, ioread32(can->reg_base + KVASER_PCIEFD_KCAN_TX_NR_PACKETS_REG)); + can->tx_max_count = min(KVASER_PCIEFD_CAN_TX_MAX_COUNT, tx_nr_packets_max - 1); can->can.clock.freq = pcie->freq; - can->can.echo_skb_max = min(KVASER_PCIEFD_CAN_TX_MAX_COUNT, tx_nr_packets_max - 1); - can->echo_idx = 0; - spin_lock_init(&can->echo_lock); + can->can.echo_skb_max = roundup_pow_of_two(can->tx_max_count); spin_lock_init(&can->lock); can->can.bittiming_const = &kvaser_pciefd_bittiming_const; @@ -1510,19 +1518,21 @@ static int kvaser_pciefd_handle_ack_packet(struct kvaser_pciefd *pcie, netdev_dbg(can->can.dev, "Packet was flushed\n"); } else { int echo_idx = FIELD_GET(KVASER_PCIEFD_PACKET_SEQ_MASK, p->header[0]); - int len; - u8 count; + unsigned int len, frame_len = 0; struct sk_buff *skb; + if (echo_idx != (can->ack_idx & (can->can.echo_skb_max - 1))) + return 0; skb = can->can.echo_skb[echo_idx]; - if (skb) - kvaser_pciefd_set_skb_timestamp(pcie, skb, p->timestamp); - len = can_get_echo_skb(can->can.dev, echo_idx, NULL); - count = FIELD_GET(KVASER_PCIEFD_KCAN_TX_NR_PACKETS_CURRENT_MASK, - ioread32(can->reg_base + KVASER_PCIEFD_KCAN_TX_NR_PACKETS_REG)); + if (!skb) + return 0; + kvaser_pciefd_set_skb_timestamp(pcie, skb, p->timestamp); + len = can_get_echo_skb(can->can.dev, echo_idx, &frame_len); - if (count < can->can.echo_skb_max && netif_queue_stopped(can->can.dev)) - netif_wake_queue(can->can.dev); + /* Pairs with barrier in kvaser_pciefd_start_xmit() */ + smp_store_release(&can->ack_idx, can->ack_idx + 1); + can->completed_tx_pkts++; + can->completed_tx_bytes += frame_len; if (!one_shot_fail) { can->can.dev->stats.tx_bytes += len; @@ -1638,11 +1646,26 @@ static int kvaser_pciefd_read_buffer(struct kvaser_pciefd *pcie, int dma_buf) { int pos = 0; int res = 0; + unsigned int i; do { res = kvaser_pciefd_read_packet(pcie, &pos, dma_buf); } while (!res && pos > 0 && pos < KVASER_PCIEFD_DMA_SIZE); + /* Report ACKs in this buffer to BQL en masse for correct periods */ + for (i = 0; i < pcie->nr_channels; ++i) { + struct kvaser_pciefd_can *can = pcie->can[i]; + + if (!can->completed_tx_pkts) + continue; + netif_subqueue_completed_wake(can->can.dev, 0, + can->completed_tx_pkts, + can->completed_tx_bytes, + kvaser_pciefd_tx_avail(can), 1); + can->completed_tx_pkts = 0; + can->completed_tx_bytes = 0; + } + return res; } -- 2.47.2

3 months, 4 weeks

1
0
0 0

[PATCH v2 1/3] can: kvaser_pciefd: Force IRQ edge in case of nested IRQ

by Axel Forsman

Avoid the driver missing IRQs by temporarily masking IRQs in the ISR to enforce an edge even if a different IRQ is signalled before handled IRQs are cleared. Fixes: 48f827d4f48f ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR") Cc: stable(a)vger.kernel.org Signed-off-by: Axel Forsman <axfo(a)kvaser.com> Tested-by: Jimmy Assarsson <extja(a)kvaser.com> Reviewed-by: Jimmy Assarsson <extja(a)kvaser.com> --- drivers/net/can/kvaser_pciefd.c | 83 ++++++++++++++++----------------- 1 file changed, 39 insertions(+), 44 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index fa04a7ced02b..4d84f7d13c6f 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1646,24 +1646,28 @@ static int kvaser_pciefd_read_buffer(struct kvaser_pciefd *pcie, int dma_buf) return res; } -static u32 kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie) +static void kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie) { + void __iomem *srb_cmd_reg = KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG; u32 irq = ioread32(KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0) - kvaser_pciefd_read_buffer(pcie, 0); + iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1) + if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0) { + kvaser_pciefd_read_buffer(pcie, 0); + iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, srb_cmd_reg); /* Rearm buffer */ + } + + if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1) { kvaser_pciefd_read_buffer(pcie, 1); + iowrite32(KVASER_PCIEFD_SRB_CMD_RDB1, srb_cmd_reg); /* Rearm buffer */ + } if (unlikely(irq & KVASER_PCIEFD_SRB_IRQ_DOF0 || irq & KVASER_PCIEFD_SRB_IRQ_DOF1 || irq & KVASER_PCIEFD_SRB_IRQ_DUF0 || irq & KVASER_PCIEFD_SRB_IRQ_DUF1)) dev_err(&pcie->pci->dev, "DMA IRQ error 0x%08X\n", irq); - - iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - return irq; } static void kvaser_pciefd_transmit_irq(struct kvaser_pciefd_can *can) @@ -1691,29 +1695,22 @@ static irqreturn_t kvaser_pciefd_irq_handler(int irq, void *dev) struct kvaser_pciefd *pcie = (struct kvaser_pciefd *)dev; const struct kvaser_pciefd_irq_mask *irq_mask = pcie->driver_data->irq_mask; u32 pci_irq = ioread32(KVASER_PCIEFD_PCI_IRQ_ADDR(pcie)); - u32 srb_irq = 0; - u32 srb_release = 0; int i; if (!(pci_irq & irq_mask->all)) return IRQ_NONE; + iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); + if (pci_irq & irq_mask->kcan_rx0) - srb_irq = kvaser_pciefd_receive_irq(pcie); + kvaser_pciefd_receive_irq(pcie); for (i = 0; i < pcie->nr_channels; i++) { if (pci_irq & irq_mask->kcan_tx[i]) kvaser_pciefd_transmit_irq(pcie->can[i]); } - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD0) - srb_release |= KVASER_PCIEFD_SRB_CMD_RDB0; - - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD1) - srb_release |= KVASER_PCIEFD_SRB_CMD_RDB1; - - if (srb_release) - iowrite32(srb_release, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); + iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); return IRQ_HANDLED; } @@ -1733,13 +1730,22 @@ static void kvaser_pciefd_teardown_can_ctrls(struct kvaser_pciefd *pcie) } } +static void kvaser_pciefd_disable_irq_srcs(struct kvaser_pciefd *pcie) +{ + unsigned int i; + + /* Masking PCI_IRQ is insufficient as running ISR will unmask it */ + iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG); + for (i = 0; i < pcie->nr_channels; ++i) + iowrite32(0, pcie->can[i]->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); +} + static int kvaser_pciefd_probe(struct pci_dev *pdev, const struct pci_device_id *id) { int ret; struct kvaser_pciefd *pcie; const struct kvaser_pciefd_irq_mask *irq_mask; - void __iomem *irq_en_base; pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL); if (!pcie) @@ -1805,8 +1811,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG); /* Enable PCI interrupts */ - irq_en_base = KVASER_PCIEFD_PCI_IEN_ADDR(pcie); - iowrite32(irq_mask->all, irq_en_base); + iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); /* Ready the DMA buffers */ iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); @@ -1820,8 +1825,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, return 0; err_free_irq: - /* Disable PCI interrupts */ - iowrite32(0, irq_en_base); + kvaser_pciefd_disable_irq_srcs(pcie); free_irq(pcie->pci->irq, pcie); err_pci_free_irq_vectors: @@ -1844,35 +1848,26 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, return ret; } -static void kvaser_pciefd_remove_all_ctrls(struct kvaser_pciefd *pcie) -{ - int i; - - for (i = 0; i < pcie->nr_channels; i++) { - struct kvaser_pciefd_can *can = pcie->can[i]; - - if (can) { - iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); - unregister_candev(can->can.dev); - del_timer(&can->bec_poll_timer); - kvaser_pciefd_pwm_stop(can); - free_candev(can->can.dev); - } - } -} - static void kvaser_pciefd_remove(struct pci_dev *pdev) { struct kvaser_pciefd *pcie = pci_get_drvdata(pdev); + unsigned int i; - kvaser_pciefd_remove_all_ctrls(pcie); + for (i = 0; i < pcie->nr_channels; ++i) { + struct kvaser_pciefd_can *can = pcie->can[i]; - /* Disable interrupts */ - iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CTRL_REG); - iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); + unregister_candev(can->can.dev); + del_timer(&can->bec_poll_timer); + kvaser_pciefd_pwm_stop(can); + } + kvaser_pciefd_disable_irq_srcs(pcie); free_irq(pcie->pci->irq, pcie); pci_free_irq_vectors(pcie->pci); + + for (i = 0; i < pcie->nr_channels; ++i) + free_candev(pcie->can[i]->can.dev); + pci_iounmap(pdev, pcie->reg_base); pci_release_regions(pdev); pci_disable_device(pdev); -- 2.47.2

3 months, 4 weeks

1
0
0 0

[PATCH] HID: bpf: abort dispatch if device destroyed

by Rong Zhang

The current HID bpf implementation assumes no output report/request will go through it after hid_bpf_destroy_device() has been called. This leads to a bug that unplugging certain types of HID devices causes a cleaned- up SRCU to be accessed. The bug was previously a hidden failure until a recent x86 percpu change [1] made it access not-present pages. The bug will be triggered if the conditions below are met: A) a device under the driver has some LEDs on B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver) If condition A is met, hidinput_led_worker() is always scheduled *after* hid_bpf_destroy_device(). hid_destroy_device ` hid_bpf_destroy_device ` cleanup_srcu_struct(&hdev->bpf.srcu) ` hid_remove_device ` ... ` led_classdev_unregister ` led_trigger_set(led_cdev, NULL) ` led_set_brightness(led_cdev, LED_OFF) ` ... ` input_inject_event ` input_event_dispose ` hidinput_input_event ` schedule_work(&hid->led_work) [hidinput_led_worker] This is fine when condition B is not met, where hidinput_led_worker() calls hid_ll_driver->request(). This is the case for most HID drivers, which implement it or use the generic one from usbhid. The driver itself or an underlying driver will then abort processing the request. Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads to the bug. hidinput_led_worker ` hid_hw_output_report ` dispatch_hid_bpf_output_report ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) The bug has existed since the introduction [2] of dispatch_hid_bpf_output_report(). However, the same bug also exists in dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect because of the lack of [1], but confirmed bpf.destroyed == 1) the bug against the commit (i.e., the Fixes:) introducing the function. This is because hidinput_led_worker() falls back to hid_hw_raw_request() when hid_ll_driver->output_report() is uninplemented (e.g., logitech- djreceiver). hidinput_led_worker ` hid_hw_output_report: -ENOSYS ` hid_hw_raw_request ` dispatch_hid_bpf_raw_requests ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) Fix the issue by returning early in the two mentioned functions if hid_bpf has been marked as destroyed. Though dispatch_hid_bpf_device_event() handles input events, and there is no evidence that it may be called after the destruction, the same check, as a safety net, is also added to it to maintain the consistency among all dispatch functions. The impact of the bug on other architectures is unclear. Even if it acts as a hidden failure, this is still dangerous because it corrupts whatever is on the address calculated by SRCU. Thus, CC'ing the stable list. [1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets") [2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for hid_hw_output_report") Closes: https://lore.kernel.org/all/20250506145548.GGaBoi9Jzp3aeJizTR@fat_crate.loc… Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests") Cc: stable(a)vger.kernel.org Signed-off-by: Rong Zhang <i(a)rong.moe> --- drivers/hid/bpf/hid_bpf_dispatch.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hid/bpf/hid_bpf_dispatch.c b/drivers/hid/bpf/hid_bpf_dispatch.c index 2e96ec6a3073..9a06f9b0e4ef 100644 --- a/drivers/hid/bpf/hid_bpf_dispatch.c +++ b/drivers/hid/bpf/hid_bpf_dispatch.c @@ -38,6 +38,9 @@ dispatch_hid_bpf_device_event(struct hid_device *hdev, enum hid_report_type type struct hid_bpf_ops *e; int ret; + if (unlikely(hdev->bpf.destroyed)) + return ERR_PTR(-ENODEV); + if (type >= HID_REPORT_TYPES) return ERR_PTR(-EINVAL); @@ -93,6 +96,9 @@ int dispatch_hid_bpf_raw_requests(struct hid_device *hdev, struct hid_bpf_ops *e; int ret, idx; + if (unlikely(hdev->bpf.destroyed)) + return -ENODEV; + if (rtype >= HID_REPORT_TYPES) return -EINVAL; @@ -130,6 +136,9 @@ int dispatch_hid_bpf_output_report(struct hid_device *hdev, struct hid_bpf_ops *e; int ret, idx; + if (unlikely(hdev->bpf.destroyed)) + return -ENODEV; + idx = srcu_read_lock(&hdev->bpf.srcu); list_for_each_entry_srcu(e, &hdev->bpf.prog_list, list, srcu_read_lock_held(&hdev->bpf.srcu)) { base-commit: 82f2b0b97b36ee3fcddf0f0780a9a0825d52fec3 -- 2.49.0

3 months, 4 weeks

3
2
0 0

[PATCH 0/3] i2c: pxa: fix I2C communication on Armada 3700

by Gabor Juhos

There is a long standing bug which causes I2C communication not to work on the Armada 3700 based boards. This small series restores that functionality. Signed-off-by: Gabor Juhos <j4g8y7(a)gmail.com> Signed-off-by: Imre Kaloz <kaloz(a)openwrt.org> --- Gabor Juhos (3): i2c: add init_recovery() callback i2c: pxa: prevent calling of the generic recovery init code i2c: pxa: handle 'Early Bus Busy' condition on Armada 3700 drivers/i2c/busses/i2c-pxa.c | 25 +++++++++++++++++++------ drivers/i2c/i2c-core-base.c | 8 +++++++- include/linux/i2c.h | 4 ++++ 3 files changed, 30 insertions(+), 7 deletions(-) --- base-commit: 92a09c47464d040866cf2b4cd052bc60555185fb change-id: 20250510-i2c-pxa-fix-i2c-communication-3e6de1e3d0c6 Best regards, -- Gabor Juhos <j4g8y7(a)gmail.com>

3 months, 4 weeks

2
4
0 0

Re: [PATCH 6.14 000/197] 6.14.7-rc1 review

by Стас Ничипорович

With an unset CONFIG_CPU_MITIGATIONS, or more precisely with CONFIG_MITIGATION_ITS, I get a compilation error: ld: arch/x86/net/bpf_jit_comp.o: in function `emit_indirect_jump': bpf_jit_comp.c:(.text+0x8cb): undefined reference to `__x86_indirect_its_thunk_array' make[2]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1 make[1]: *** [/usr/src/linux/Makefile:1182: vmlinux] Error 2 make: *** [Makefile:224: __sub-make] Error 2

3 months, 4 weeks

1
0
0 0

[PATCH v3] gpio: pca953x: fix IRQ storm on system wake up

by Francesco Dolcini

From: Emanuele Ghidoli <emanuele.ghidoli(a)toradex.com> If an input changes state during wake-up and is used as an interrupt source, the IRQ handler reads the volatile input register to clear the interrupt mask and deassert the IRQ line. However, the IRQ handler is triggered before access to the register is granted, causing the read operation to fail. As a result, the IRQ handler enters a loop, repeatedly printing the "failed reading register" message, until `pca953x_resume()` is eventually called, which restores the driver context and enables access to registers. Fix by disabling the IRQ line before entering suspend mode, and re-enabling it after the driver context is restored in `pca953x_resume()`. An IRQ can be disabled with disable_irq() and still wake the system as long as the IRQ has wake enabled, so the wake-up functionality is preserved. Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle") Cc: stable(a)vger.kernel.org Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli(a)toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini(a)toradex.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Tested-by: Geert Uytterhoeven <geert+renesas(a)glider.be> --- v2 -> v3 - add r-b Andy, t-b Geert - fixed commit message v1 -> v2 - Instead of calling PM ops with disabled interrupts, just disable the irq while going in suspend and re-enable it after restoring the context in resume function. --- drivers/gpio/gpio-pca953x.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index ab2c0fd428fb..b852e4997629 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -1226,6 +1226,8 @@ static int pca953x_restore_context(struct pca953x_chip *chip) guard(mutex)(&chip->i2c_lock); + if (chip->client->irq > 0) + enable_irq(chip->client->irq); regcache_cache_only(chip->regmap, false); regcache_mark_dirty(chip->regmap); ret = pca953x_regcache_sync(chip); @@ -1238,6 +1240,10 @@ static int pca953x_restore_context(struct pca953x_chip *chip) static void pca953x_save_context(struct pca953x_chip *chip) { guard(mutex)(&chip->i2c_lock); + + /* Disable IRQ to prevent early triggering while regmap "cache only" is on */ + if (chip->client->irq > 0) + disable_irq(chip->client->irq); regcache_cache_only(chip->regmap, true); } -- 2.39.5

4 months

2
1
0 0

[PATCH] ALSA: usb-audio: Add sample rate quirk for Audioengine D1

by Christian Heusel

A user reported on the Arch Linux Forums that their device is emitting the following message in the kernel journal, which is fixed by adding the quirk as submitted in this patch: > kernel: usb 1-2: current rate 8436480 is different from the runtime rate 48000 There also is an entry for this product line added long time ago. Their specific device has the following ID: $ lsusb | grep Audio Bus 001 Device 002: ID 1101:0003 EasyPass Industrial Co., Ltd Audioengine D1 Link: https://bbs.archlinux.org/viewtopic.php?id=305494 Fixes: 93f9d1a4ac593 ("ALSA: usb-audio: Apply sample rate quirk for Audioengine D1") Cc: stable(a)vger.kernel.org Signed-off-by: Christian Heusel <christian(a)heusel.eu> --- sound/usb/quirks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 9112313a9dbc005d8ab6076a6f2f4b0c0cecc64f..eb192834db68ca599770055cb563201e648f20ba 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -2250,6 +2250,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_FIXED_RATE), DEVICE_FLG(0x0fd9, 0x0008, /* Hauppauge HVR-950Q */ QUIRK_FLAG_SHARE_MEDIA_DEVICE | QUIRK_FLAG_ALIGN_TRANSFER), + DEVICE_FLG(0x1101, 0x0003, /* Audioengine D1 */ + QUIRK_FLAG_GET_SAMPLE_RATE), DEVICE_FLG(0x1224, 0x2a25, /* Jieli Technology USB PHY 2.0 */ QUIRK_FLAG_GET_SAMPLE_RATE | QUIRK_FLAG_MIC_RES_16), DEVICE_FLG(0x1395, 0x740a, /* Sennheiser DECT */ --- base-commit: 82f2b0b97b36ee3fcddf0f0780a9a0825d52fec3 change-id: 20250512-audioengine-quirk-addition-718e6c86a2cc Best regards, -- Christian Heusel <christian(a)heusel.eu>

4 months

2
1
0 0

[PATCH net v3 0/2] address EEE regressions on KSZ switches since v6.9 (v6.14+)

by Oleksij Rempel

This patch series addresses a regression in Energy Efficient Ethernet (EEE) handling for KSZ switches with integrated PHYs, introduced in kernel v6.9 by commit fe0d4fd9285e ("net: phy: Keep track of EEE configuration"). The first patch updates the DSA driver to allow phylink to properly manage PHY EEE configuration. Since integrated PHYs handle LPI internally and ports without integrated PHYs do not document MAC-level LPI support, dummy MAC LPI callbacks are provided. The second patch removes outdated EEE workarounds from the micrel PHY driver, as they are no longer needed with correct phylink handling. This series addresses the regression for mainline and kernels starting from v6.14. It is not easily possible to fully fix older kernels due to missing infrastructure changes. Tested on KSZ9893 hardware. Oleksij Rempel (2): net: dsa: microchip: let phylink manage PHY EEE configuration on KSZ switches net: phy: micrel: remove KSZ9477 EEE quirks now handled by phylink drivers/net/dsa/microchip/ksz_common.c | 135 ++++++++++++++++++++----- drivers/net/phy/micrel.c | 7 -- include/linux/micrel_phy.h | 1 - 3 files changed, 107 insertions(+), 36 deletions(-) -- 2.39.5

4 months

3
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025