May 2025 - Linux-stable-mirror

[PATCH] can: kvaser_pciefd: refine error prone echo_skb_max handling logic

by Fedor Pchelkin

echo_skb_max should define the supported upper limit of echo_skb[] allocated inside the netdevice's priv. The corresponding size value provided by this driver to alloc_candev() is KVASER_PCIEFD_CAN_TX_MAX_COUNT which is 17. But later echo_skb_max is rounded up to the nearest power of two (for the max case, that would be 32) and the tx/ack indices calculated further during tx/rx may exceed the upper array boundary. Kasan reported this for the ack case inside kvaser_pciefd_handle_ack_packet(), though the xmit function has actually caught the same thing earlier. BUG: KASAN: slab-out-of-bounds in kvaser_pciefd_handle_ack_packet+0x2d7/0x92a drivers/net/can/kvaser_pciefd.c:1528 Read of size 8 at addr ffff888105e4f078 by task swapper/4/0 CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 6.15.0 #12 PREEMPT(voluntary) Call Trace: <IRQ> dump_stack_lvl lib/dump_stack.c:122 print_report mm/kasan/report.c:521 kasan_report mm/kasan/report.c:634 kvaser_pciefd_handle_ack_packet drivers/net/can/kvaser_pciefd.c:1528 kvaser_pciefd_read_packet drivers/net/can/kvaser_pciefd.c:1605 kvaser_pciefd_read_buffer drivers/net/can/kvaser_pciefd.c:1656 kvaser_pciefd_receive_irq drivers/net/can/kvaser_pciefd.c:1684 kvaser_pciefd_irq_handler drivers/net/can/kvaser_pciefd.c:1733 __handle_irq_event_percpu kernel/irq/handle.c:158 handle_irq_event kernel/irq/handle.c:210 handle_edge_irq kernel/irq/chip.c:833 __common_interrupt arch/x86/kernel/irq.c:296 common_interrupt arch/x86/kernel/irq.c:286 </IRQ> Remove echo_skb_max rounding as this may increase it to unexpected values. In this sense restore echo_skb_max handling logic prior to commit 8256e0ca6010 ("can: kvaser_pciefd: Fix echo_skb race"). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 8256e0ca6010 ("can: kvaser_pciefd: Fix echo_skb race") Cc: stable(a)vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin(a)ispras.ru> --- Actually the trick with rounding up allows to calculate seq numbers efficiently, avoiding a more consuming 'mod' operation used in the current patch. I see tx max size definitely matters only for kvaser_pciefd_tx_avail(), but for seq numbers' generation that's not the case - we're free to calculate them as would be more convenient, not taking tx max size into account. The only downside is that the size of echo_skb[] should correspond to the max seq number (not tx max number), so in some situations a bit more memory would be consumed than could be. So another approach to fix the problem would be to precompute the rounded up value of echo_skb_max and pass it to alloc_candev() making the size of the underlying echo_skb[] sufficient. If that looks more acceptable, I'll be glad to rework the patch in that direction. drivers/net/can/kvaser_pciefd.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index f6921368cd14..1ec4ab9510b6 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -411,7 +411,6 @@ struct kvaser_pciefd_can { void __iomem *reg_base; struct can_berr_counter bec; u8 cmd_seq; - u8 tx_max_count; u8 tx_idx; u8 ack_idx; int err_rep_cnt; @@ -760,7 +759,7 @@ static int kvaser_pciefd_stop(struct net_device *netdev) static unsigned int kvaser_pciefd_tx_avail(const struct kvaser_pciefd_can *can) { - return can->tx_max_count - (READ_ONCE(can->tx_idx) - READ_ONCE(can->ack_idx)); + return can->can.echo_skb_max - (READ_ONCE(can->tx_idx) - READ_ONCE(can->ack_idx)); } static int kvaser_pciefd_prepare_tx_packet(struct kvaser_pciefd_tx_packet *p, @@ -810,7 +809,7 @@ static netdev_tx_t kvaser_pciefd_start_xmit(struct sk_buff *skb, { struct kvaser_pciefd_can *can = netdev_priv(netdev); struct kvaser_pciefd_tx_packet packet; - unsigned int seq = can->tx_idx & (can->can.echo_skb_max - 1); + unsigned int seq = can->tx_idx % can->can.echo_skb_max; unsigned int frame_len; int nr_words; @@ -992,10 +991,9 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) tx_nr_packets_max = FIELD_GET(KVASER_PCIEFD_KCAN_TX_NR_PACKETS_MAX_MASK, ioread32(can->reg_base + KVASER_PCIEFD_KCAN_TX_NR_PACKETS_REG)); - can->tx_max_count = min(KVASER_PCIEFD_CAN_TX_MAX_COUNT, tx_nr_packets_max - 1); + can->can.echo_skb_max = min(KVASER_PCIEFD_CAN_TX_MAX_COUNT, tx_nr_packets_max - 1); can->can.clock.freq = pcie->freq; - can->can.echo_skb_max = roundup_pow_of_two(can->tx_max_count); spin_lock_init(&can->lock); can->can.bittiming_const = &kvaser_pciefd_bittiming_const; @@ -1523,7 +1521,7 @@ static int kvaser_pciefd_handle_ack_packet(struct kvaser_pciefd *pcie, unsigned int len, frame_len = 0; struct sk_buff *skb; - if (echo_idx != (can->ack_idx & (can->can.echo_skb_max - 1))) + if (echo_idx != can->ack_idx % can->can.echo_skb_max) return 0; skb = can->can.echo_skb[echo_idx]; if (!skb) -- 2.49.0

3 months, 2 weeks

2
2
0 0

[PATCH] accel/ivpu: Fix warning in ivpu_gem_bo_free()

by Jacek Lawrynowicz

Don't WARN if imported buffers are in use in ivpu_gem_bo_free() as they can be indeed used in the original context/driver. Fixes: 647371a6609d ("accel/ivpu: Add GEM buffer object management") Cc: <stable(a)vger.kernel.org> # v6.3 Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz(a)linux.intel.com> --- drivers/accel/ivpu/ivpu_gem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/accel/ivpu/ivpu_gem.c b/drivers/accel/ivpu/ivpu_gem.c index 5908268ca45e9..0371a8b4a474f 100644 --- a/drivers/accel/ivpu/ivpu_gem.c +++ b/drivers/accel/ivpu/ivpu_gem.c @@ -285,7 +285,8 @@ static void ivpu_gem_bo_free(struct drm_gem_object *obj) list_del(&bo->bo_list_node); mutex_unlock(&vdev->bo_list_lock); - drm_WARN_ON(&vdev->drm, !dma_resv_test_signaled(obj->resv, DMA_RESV_USAGE_READ)); + drm_WARN_ON(&vdev->drm, !bo->base.base.import_attach && + !dma_resv_test_signaled(obj->resv, DMA_RESV_USAGE_READ)); drm_WARN_ON(&vdev->drm, ivpu_bo_size(bo) == 0); drm_WARN_ON(&vdev->drm, bo->base.vaddr); -- 2.45.1

3 months, 2 weeks

2
2
0 0

[PATCH] e1000e: fix heap overflow in e1000_set_eeprom()

by Mikael Wessel

The ETHTOOL_SETEEPROM ioctl copies user data into a kmalloc'ed buffer without validating eeprom->len and eeprom->offset. A CAP_NET_ADMIN user can overflow the heap and crash the kernel or gain code execution. Validate length and offset before kmalloc() to avoid leaking eeprom_buff. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Reported-by: Mikael Wessel <post(a)mikaelkw.online> Signed-off-by: Mikael Wessel <post(a)mikaelkw.online> Cc: stable(a)vger.kernel.org --- drivers/net/ethernet/intel/e1000e/ethtool.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 98e541e39730..d04e59528619 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -561,7 +561,7 @@ static int e1000_set_eeprom(struct net_device *netdev, return -EOPNOTSUPP; if (eeprom->magic != - (adapter->pdev->vendor | (adapter->pdev->device << 16))) + (adapter->pdev->vendor | (adapter->pdev->device << 16))) return -EFAULT; if (adapter->flags & FLAG_READ_ONLY_NVM) @@ -569,6 +569,10 @@ static int e1000_set_eeprom(struct net_device *netdev, max_len = hw->nvm.word_size * 2; + /* bounds check: offset + len must not exceed EEPROM size */ + if (eeprom->offset + eeprom->len > max_len) + return -EINVAL; + first_word = eeprom->offset >> 1; last_word = (eeprom->offset + eeprom->len - 1) >> 1; eeprom_buff = kmalloc(max_len, GFP_KERNEL); @@ -596,9 +600,6 @@ static int e1000_set_eeprom(struct net_device *netdev, for (i = 0; i < last_word - first_word + 1; i++) le16_to_cpus(&eeprom_buff[i]); - if (eeprom->len > max_len || - eeprom->offset > max_len - eeprom->len) - return -EINVAL; memcpy(ptr, bytes, eeprom->len); for (i = 0; i < last_word - first_word + 1; i++) -- 2.48.1

3 months, 2 weeks

3
2
0 0

[PATCH] wifi: ath12k: fix ring-buffer corruption

by Johan Hovold

Users of the Lenovo ThinkPad X13s have reported that Wi-Fi sometimes breaks and the log fills up with errors like: ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1484, expected 1492 ath11k_pci 0006:01:00.0: HTC Rx: insufficient length, got 1460, expected 1484 which based on a quick look at the ath11k driver seemed to indicate some kind of ring-buffer corruption. Miaoqing Pan tracked it down to the host seeing the updated destination ring head pointer before the updated descriptor, and the error handling for that in turn leaves the ring buffer in an inconsistent state. While this has not yet been observed with ath12k, the ring-buffer implementation is very similar to the ath11k one and it suffers from the same bugs. Add the missing memory barrier to make sure that the descriptor is read after the head pointer to address the root cause of the corruption while fixing up the error handling in case there are ever any (ordering) bugs on the device side. Note that the READ_ONCE() are only needed to avoid compiler mischief in case the ring-buffer helpers are ever inlined. Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable(a)vger.kernel.org # 6.3 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218623 Link: https://lore.kernel.org/20250310010217.3845141-3-quic_miaoqing@quicinc.com Cc: Miaoqing Pan <quic_miaoqing(a)quicinc.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> --- drivers/net/wireless/ath/ath12k/ce.c | 11 +++++------ drivers/net/wireless/ath/ath12k/hal.c | 4 ++-- 2 files changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/ce.c b/drivers/net/wireless/ath/ath12k/ce.c index be0d669d31fc..740586fe49d1 100644 --- a/drivers/net/wireless/ath/ath12k/ce.c +++ b/drivers/net/wireless/ath/ath12k/ce.c @@ -343,11 +343,10 @@ static int ath12k_ce_completed_recv_next(struct ath12k_ce_pipe *pipe, goto err; } + /* Make sure descriptor is read after the head pointer. */ + dma_rmb(); + *nbytes = ath12k_hal_ce_dst_status_get_length(desc); - if (*nbytes == 0) { - ret = -EIO; - goto err; - } *skb = pipe->dest_ring->skb[sw_index]; pipe->dest_ring->skb[sw_index] = NULL; @@ -380,8 +379,8 @@ static void ath12k_ce_recv_process_cb(struct ath12k_ce_pipe *pipe) dma_unmap_single(ab->dev, ATH12K_SKB_RXCB(skb)->paddr, max_nbytes, DMA_FROM_DEVICE); - if (unlikely(max_nbytes < nbytes)) { - ath12k_warn(ab, "rxed more than expected (nbytes %d, max %d)", + if (unlikely(max_nbytes < nbytes || nbytes == 0)) { + ath12k_warn(ab, "unexpected rx length (nbytes %d, max %d)", nbytes, max_nbytes); dev_kfree_skb_any(skb); continue; diff --git a/drivers/net/wireless/ath/ath12k/hal.c b/drivers/net/wireless/ath/ath12k/hal.c index cd59ff8e6c7b..91d5126ca149 100644 --- a/drivers/net/wireless/ath/ath12k/hal.c +++ b/drivers/net/wireless/ath/ath12k/hal.c @@ -1962,7 +1962,7 @@ u32 ath12k_hal_ce_dst_status_get_length(struct hal_ce_srng_dst_status_desc *desc { u32 len; - len = le32_get_bits(desc->flags, HAL_CE_DST_STATUS_DESC_FLAGS_LEN); + len = le32_get_bits(READ_ONCE(desc->flags), HAL_CE_DST_STATUS_DESC_FLAGS_LEN); desc->flags &= ~cpu_to_le32(HAL_CE_DST_STATUS_DESC_FLAGS_LEN); return len; @@ -2132,7 +2132,7 @@ void ath12k_hal_srng_access_begin(struct ath12k_base *ab, struct hal_srng *srng) srng->u.src_ring.cached_tp = *(volatile u32 *)srng->u.src_ring.tp_addr; else - srng->u.dst_ring.cached_hp = *srng->u.dst_ring.hp_addr; + srng->u.dst_ring.cached_hp = READ_ONCE(*srng->u.dst_ring.hp_addr); } /* Update cached ring head/tail pointers to HW. ath12k_hal_srng_access_begin() -- 2.48.1

3 months, 2 weeks

5
6
0 0

[PATCH] iommu/arm-smmu-qcom: Add SM6115 MDSS compatible

by Alexey Klimov

Add the SM6115 MDSS compatible to clients compatible list, as it also needs that workaround. Without this workaround, for example, QRB4210 RB2 which is based on SM4250/SM6115 generates a lot of smmu unhandled context faults during boot: arm_smmu_context_fault: 116854 callbacks suppressed arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1] arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 and also leads to failed initialisation of lontium lt9611uxc driver and gpu afterwards: ------------[ cut here ]------------ !aspace WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm] Modules linked in: ... (long list of modules) CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_gem_vma_init+0x150/0x18c [msm] lr : msm_gem_vma_init+0x150/0x18c [msm] sp : ffff80008144b280 ... Call trace: msm_gem_vma_init+0x150/0x18c [msm] (P) get_vma_locked+0xc0/0x194 [msm] msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm] msm_gem_kernel_new+0x48/0x160 [msm] msm_gpu_init+0x34c/0x53c [msm] adreno_gpu_init+0x1b0/0x2d8 [msm] a6xx_gpu_init+0x1e8/0x9e0 [msm] adreno_bind+0x2b8/0x348 [msm] component_bind_all+0x100/0x230 msm_drm_bind+0x13c/0x3d0 [msm] try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa4/0x174 component_add+0x14/0x20 dsi_dev_attach+0x20/0x34 [msm] dsi_host_attach+0x58/0x98 [msm] devm_mipi_dsi_attach+0x34/0x90 lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc] lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc] i2c_device_probe+0x148/0x2a8 really_probe+0xbc/0x2c0 __driver_probe_device+0x78/0x120 driver_probe_device+0x3c/0x154 __driver_attach+0x90/0x1a0 bus_for_each_dev+0x68/0xb8 driver_attach+0x24/0x30 bus_add_driver+0xe4/0x208 driver_register+0x68/0x124 i2c_register_driver+0x48/0xcc lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc] do_one_initcall+0x60/0x1d4 do_init_module+0x54/0x1fc load_module+0x1748/0x1c8c init_module_from_file+0x74/0xa0 __arm64_sys_finit_module+0x130/0x2f8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x2c/0x80 el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22 msm_dpu 5e01000.display-controller: failed to load adreno gpu platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19 msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22 msm_dpu 5e01000.display-controller: adev bind failed: -22 lt9611uxc 0-002b: failed to attach dsi to host lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22 Suggested-by: Bjorn Andersson <andersson(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Alexey Klimov <alexey.klimov(a)linaro.org> --- drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c index 59d02687280e..c919babcea75 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c @@ -365,6 +365,7 @@ static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { { .compatible = "qcom,sdm670-mdss" }, { .compatible = "qcom,sdm845-mdss" }, { .compatible = "qcom,sdm845-mss-pil" }, + { .compatible = "qcom,sm6115-mdss" }, { .compatible = "qcom,sm6350-mdss" }, { .compatible = "qcom,sm6375-mdss" }, { .compatible = "qcom,sm8150-mdss" }, -- 2.47.2

3 months, 2 weeks

2
2
0 0

[PATCH 2/2] drm/amdgpu: Dirty cleared blocks on allocation

by Natalie Vock

If we hand out cleared blocks to users, they are expected to write at least some non-zero values somewhere. If we keep the CLEAR bit set on the block, amdgpu_fill_buffer will assume there is nothing to do and incorrectly skip clearing the block. Ultimately, the (still dirty) block will be reused as if it were cleared, without any wiping of the memory contents. Most severely, this means that any buffer allocated with AMDGPU_GEM_CREATE_VRAM_CLEARED | AMDGPU_GEM_CREATE_WIPE_ON_RELEASE (which is the case for **all userspace buffers**) are neither guaranteed to contain cleared VRAM, nor are they being wiped on release, potentially leaking application memory to arbitrary other applications. Fixes: a68c7eaa7a8ff ("drm/amdgpu: Enable clear page functionality") Cc: stable(a)vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3812 Signed-off-by: Natalie Vock <natalie.vock(a)gmx.de> --- drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c index 2d7f82e98df9..cecc67d0f0b8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c @@ -591,6 +591,13 @@ static int amdgpu_vram_mgr_new(struct ttm_resource_manager *man, list_for_each_entry(block, &vres->blocks, link) { unsigned long start; + /* + * Allocated blocks may be dirtied as soon as we return. + * Mark all blocks as dirty here, otherwise we might + * incorrectly assume the memory is still zeroed. + */ + drm_buddy_block_set_dirty(block); + start = amdgpu_vram_mgr_block_start(block) + amdgpu_vram_mgr_block_size(block); start >>= PAGE_SHIFT; -- 2.49.0

3 months, 2 weeks

4
6
0 0

FAILED: patch "[PATCH] can: kvaser_pciefd: Force IRQ edge in case of nested IRQ" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 9176bd205ee0b2cd35073a9973c2a0936bcb579e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052430-customary-paramount-b71a@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9176bd205ee0b2cd35073a9973c2a0936bcb579e Mon Sep 17 00:00:00 2001 From: Axel Forsman <axfo(a)kvaser.com> Date: Tue, 20 May 2025 13:43:30 +0200 Subject: [PATCH] can: kvaser_pciefd: Force IRQ edge in case of nested IRQ Avoid the driver missing IRQs by temporarily masking IRQs in the ISR to enforce an edge even if a different IRQ is signalled before handled IRQs are cleared. Fixes: 48f827d4f48f ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR") Cc: stable(a)vger.kernel.org Signed-off-by: Axel Forsman <axfo(a)kvaser.com> Tested-by: Jimmy Assarsson <extja(a)kvaser.com> Reviewed-by: Jimmy Assarsson <extja(a)kvaser.com> Link: https://patch.msgid.link/20250520114332.8961-2-axfo@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index cf0d51805272..9cc9176c2058 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1646,24 +1646,28 @@ static int kvaser_pciefd_read_buffer(struct kvaser_pciefd *pcie, int dma_buf) return res; } -static u32 kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie) +static void kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie) { + void __iomem *srb_cmd_reg = KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG; u32 irq = ioread32(KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0) - kvaser_pciefd_read_buffer(pcie, 0); + iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1) + if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0) { + kvaser_pciefd_read_buffer(pcie, 0); + iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, srb_cmd_reg); /* Rearm buffer */ + } + + if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1) { kvaser_pciefd_read_buffer(pcie, 1); + iowrite32(KVASER_PCIEFD_SRB_CMD_RDB1, srb_cmd_reg); /* Rearm buffer */ + } if (unlikely(irq & KVASER_PCIEFD_SRB_IRQ_DOF0 || irq & KVASER_PCIEFD_SRB_IRQ_DOF1 || irq & KVASER_PCIEFD_SRB_IRQ_DUF0 || irq & KVASER_PCIEFD_SRB_IRQ_DUF1)) dev_err(&pcie->pci->dev, "DMA IRQ error 0x%08X\n", irq); - - iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - return irq; } static void kvaser_pciefd_transmit_irq(struct kvaser_pciefd_can *can) @@ -1691,29 +1695,22 @@ static irqreturn_t kvaser_pciefd_irq_handler(int irq, void *dev) struct kvaser_pciefd *pcie = (struct kvaser_pciefd *)dev; const struct kvaser_pciefd_irq_mask *irq_mask = pcie->driver_data->irq_mask; u32 pci_irq = ioread32(KVASER_PCIEFD_PCI_IRQ_ADDR(pcie)); - u32 srb_irq = 0; - u32 srb_release = 0; int i; if (!(pci_irq & irq_mask->all)) return IRQ_NONE; + iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); + if (pci_irq & irq_mask->kcan_rx0) - srb_irq = kvaser_pciefd_receive_irq(pcie); + kvaser_pciefd_receive_irq(pcie); for (i = 0; i < pcie->nr_channels; i++) { if (pci_irq & irq_mask->kcan_tx[i]) kvaser_pciefd_transmit_irq(pcie->can[i]); } - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD0) - srb_release |= KVASER_PCIEFD_SRB_CMD_RDB0; - - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD1) - srb_release |= KVASER_PCIEFD_SRB_CMD_RDB1; - - if (srb_release) - iowrite32(srb_release, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); + iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); return IRQ_HANDLED; } @@ -1733,13 +1730,22 @@ static void kvaser_pciefd_teardown_can_ctrls(struct kvaser_pciefd *pcie) } } +static void kvaser_pciefd_disable_irq_srcs(struct kvaser_pciefd *pcie) +{ + unsigned int i; + + /* Masking PCI_IRQ is insufficient as running ISR will unmask it */ + iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG); + for (i = 0; i < pcie->nr_channels; ++i) + iowrite32(0, pcie->can[i]->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); +} + static int kvaser_pciefd_probe(struct pci_dev *pdev, const struct pci_device_id *id) { int ret; struct kvaser_pciefd *pcie; const struct kvaser_pciefd_irq_mask *irq_mask; - void __iomem *irq_en_base; pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL); if (!pcie) @@ -1805,8 +1811,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG); /* Enable PCI interrupts */ - irq_en_base = KVASER_PCIEFD_PCI_IEN_ADDR(pcie); - iowrite32(irq_mask->all, irq_en_base); + iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); /* Ready the DMA buffers */ iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); @@ -1820,8 +1825,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, return 0; err_free_irq: - /* Disable PCI interrupts */ - iowrite32(0, irq_en_base); + kvaser_pciefd_disable_irq_srcs(pcie); free_irq(pcie->pci->irq, pcie); err_pci_free_irq_vectors: @@ -1844,35 +1848,26 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, return ret; } -static void kvaser_pciefd_remove_all_ctrls(struct kvaser_pciefd *pcie) -{ - int i; - - for (i = 0; i < pcie->nr_channels; i++) { - struct kvaser_pciefd_can *can = pcie->can[i]; - - if (can) { - iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); - unregister_candev(can->can.dev); - timer_delete(&can->bec_poll_timer); - kvaser_pciefd_pwm_stop(can); - free_candev(can->can.dev); - } - } -} - static void kvaser_pciefd_remove(struct pci_dev *pdev) { struct kvaser_pciefd *pcie = pci_get_drvdata(pdev); + unsigned int i; - kvaser_pciefd_remove_all_ctrls(pcie); + for (i = 0; i < pcie->nr_channels; ++i) { + struct kvaser_pciefd_can *can = pcie->can[i]; - /* Disable interrupts */ - iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CTRL_REG); - iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); + unregister_candev(can->can.dev); + timer_delete(&can->bec_poll_timer); + kvaser_pciefd_pwm_stop(can); + } + kvaser_pciefd_disable_irq_srcs(pcie); free_irq(pcie->pci->irq, pcie); pci_free_irq_vectors(pcie->pci); + + for (i = 0; i < pcie->nr_channels; ++i) + free_candev(pcie->can[i]->can.dev); + pci_iounmap(pdev, pcie->reg_base); pci_release_regions(pdev); pci_disable_device(pdev);

3 months, 2 weeks

2
1
0 0

[PATCH v4] usb: dwc3: Abort suspend on soft disconnect failure

by Kuen-Han Tsai

When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps going with the suspend, resulting in a period where the power domain is off, but the gadget driver remains connected. Within this time frame, invoking vbus_event_work() will cause an error as it attempts to access DWC3 registers for endpoint disabling after the power domain has been completely shut down. Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the controller and proceeds with a soft connect. Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume") CC: stable(a)vger.kernel.org Signed-off-by: Kuen-Han Tsai <khtsai(a)google.com> --- Kernel panic - not syncing: Asynchronous SError Interrupt Workqueue: events vbus_event_work Call trace: dump_backtrace+0xf4/0x118 show_stack+0x18/0x24 dump_stack_lvl+0x60/0x7c dump_stack+0x18/0x3c panic+0x16c/0x390 nmi_panic+0xa4/0xa8 arm64_serror_panic+0x6c/0x94 do_serror+0xc4/0xd0 el1h_64_error_handler+0x34/0x48 el1h_64_error+0x68/0x6c readl+0x4c/0x8c __dwc3_gadget_ep_disable+0x48/0x230 dwc3_gadget_ep_disable+0x50/0xc0 usb_ep_disable+0x44/0xe4 ffs_func_eps_disable+0x64/0xc8 ffs_func_set_alt+0x74/0x368 ffs_func_disable+0x18/0x28 composite_disconnect+0x90/0xec configfs_composite_disconnect+0x64/0x88 usb_gadget_disconnect_locked+0xc0/0x168 vbus_event_work+0x3c/0x58 process_one_work+0x1e4/0x43c worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 --- Changelog: v4: - correct the mistake where semicolon was forgotten - return -EAGAIN upon dwc3_gadget_suspend() failure v3: - change the Fixes tag v2: - move declarations in separate lines - add the Fixes tag --- drivers/usb/dwc3/core.c | 9 +++++++-- drivers/usb/dwc3/gadget.c | 22 +++++++++------------- 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 66a08b527165..f36bc933c55b 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -2388,6 +2388,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { u32 reg; int i; + int ret; if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) { dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) & @@ -2406,7 +2407,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) case DWC3_GCTL_PRTCAP_DEVICE: if (pm_runtime_suspended(dwc->dev)) break; - dwc3_gadget_suspend(dwc); + ret = dwc3_gadget_suspend(dwc); + if (ret) + return ret; synchronize_irq(dwc->irq_gadget); dwc3_core_exit(dwc); break; @@ -2441,7 +2444,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) break; if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) { - dwc3_gadget_suspend(dwc); + ret = dwc3_gadget_suspend(dwc); + if (ret) + return ret; synchronize_irq(dwc->irq_gadget); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 89a4dc8ebf94..630fd5f0ce97 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -4776,26 +4776,22 @@ int dwc3_gadget_suspend(struct dwc3 *dwc) int ret; ret = dwc3_gadget_soft_disconnect(dwc); - if (ret) - goto err; - - spin_lock_irqsave(&dwc->lock, flags); - if (dwc->gadget_driver) - dwc3_disconnect_gadget(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); - - return 0; - -err: /* * Attempt to reset the controller's state. Likely no * communication can be established until the host * performs a port reset. */ - if (dwc->softconnect) + if (ret && dwc->softconnect) { dwc3_gadget_soft_connect(dwc); + return -EAGAIN; + } - return ret; + spin_lock_irqsave(&dwc->lock, flags); + if (dwc->gadget_driver) + dwc3_disconnect_gadget(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; } int dwc3_gadget_resume(struct dwc3 *dwc) -- 2.49.0.604.gff1f9ca942-goog

3 months, 2 weeks

3
8
0 0

[PATCH v5] usb: dwc3: Abort suspend on soft disconnect failure

by Kuen-Han Tsai

When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps going with the suspend, resulting in a period where the power domain is off, but the gadget driver remains connected. Within this time frame, invoking vbus_event_work() will cause an error as it attempts to access DWC3 registers for endpoint disabling after the power domain has been completely shut down. Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the controller and proceeds with a soft connect. Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume") CC: stable(a)vger.kernel.org Acked-by: Thinh Nguyen <Thinh.Nguyen(a)synopsys.com> Signed-off-by: Kuen-Han Tsai <khtsai(a)google.com> --- Kernel panic - not syncing: Asynchronous SError Interrupt Workqueue: events vbus_event_work Call trace: dump_backtrace+0xf4/0x118 show_stack+0x18/0x24 dump_stack_lvl+0x60/0x7c dump_stack+0x18/0x3c panic+0x16c/0x390 nmi_panic+0xa4/0xa8 arm64_serror_panic+0x6c/0x94 do_serror+0xc4/0xd0 el1h_64_error_handler+0x34/0x48 el1h_64_error+0x68/0x6c readl+0x4c/0x8c __dwc3_gadget_ep_disable+0x48/0x230 dwc3_gadget_ep_disable+0x50/0xc0 usb_ep_disable+0x44/0xe4 ffs_func_eps_disable+0x64/0xc8 ffs_func_set_alt+0x74/0x368 ffs_func_disable+0x18/0x28 composite_disconnect+0x90/0xec configfs_composite_disconnect+0x64/0x88 usb_gadget_disconnect_locked+0xc0/0x168 vbus_event_work+0x3c/0x58 process_one_work+0x1e4/0x43c worker_thread+0x25c/0x430 kthread+0x104/0x1d4 ret_from_fork+0x10/0x20 --- Changelog: v5: - add the Acked-by tag v4: - correct the mistake where semicolon was forgotten - return -EAGAIN upon dwc3_gadget_suspend() failure v3: - change the Fixes tag v2: - move declarations in separate lines - add the Fixes tag --- drivers/usb/dwc3/core.c | 9 +++++++-- drivers/usb/dwc3/gadget.c | 22 +++++++++------------- 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 66a08b527165..f36bc933c55b 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -2388,6 +2388,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { u32 reg; int i; + int ret; if (!pm_runtime_suspended(dwc->dev) && !PMSG_IS_AUTO(msg)) { dwc->susphy_state = (dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)) & @@ -2406,7 +2407,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) case DWC3_GCTL_PRTCAP_DEVICE: if (pm_runtime_suspended(dwc->dev)) break; - dwc3_gadget_suspend(dwc); + ret = dwc3_gadget_suspend(dwc); + if (ret) + return ret; synchronize_irq(dwc->irq_gadget); dwc3_core_exit(dwc); break; @@ -2441,7 +2444,9 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) break; if (dwc->current_otg_role == DWC3_OTG_ROLE_DEVICE) { - dwc3_gadget_suspend(dwc); + ret = dwc3_gadget_suspend(dwc); + if (ret) + return ret; synchronize_irq(dwc->irq_gadget); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 321361288935..b6b63b530148 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -4821,26 +4821,22 @@ int dwc3_gadget_suspend(struct dwc3 *dwc) int ret; ret = dwc3_gadget_soft_disconnect(dwc); - if (ret) - goto err; - - spin_lock_irqsave(&dwc->lock, flags); - if (dwc->gadget_driver) - dwc3_disconnect_gadget(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); - - return 0; - -err: /* * Attempt to reset the controller's state. Likely no * communication can be established until the host * performs a port reset. */ - if (dwc->softconnect) + if (ret && dwc->softconnect) { dwc3_gadget_soft_connect(dwc); + return -EAGAIN; + } - return ret; + spin_lock_irqsave(&dwc->lock, flags); + if (dwc->gadget_driver) + dwc3_disconnect_gadget(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); + + return 0; } int dwc3_gadget_resume(struct dwc3 *dwc) -- 2.49.0.1164.gab81da1b16-goog

3 months, 2 weeks

1
0
0 0

[PATCH] accel/ivpu: Use firmware names from upstream repo

by Jacek Lawrynowicz

Use FW names from linux-firmware repo instead of deprecated ones. Fixes: c140244f0cfb ("accel/ivpu: Add initial Panther Lake support") Cc: <stable(a)vger.kernel.org> # v6.13+ Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz(a)linux.intel.com> --- drivers/accel/ivpu/ivpu_fw.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/accel/ivpu/ivpu_fw.c b/drivers/accel/ivpu/ivpu_fw.c index ccaaf6c100c02..9db741695401e 100644 --- a/drivers/accel/ivpu/ivpu_fw.c +++ b/drivers/accel/ivpu/ivpu_fw.c @@ -55,18 +55,18 @@ static struct { int gen; const char *name; } fw_names[] = { - { IVPU_HW_IP_37XX, "vpu_37xx.bin" }, + { IVPU_HW_IP_37XX, "intel/vpu/vpu_37xx_v1.bin" }, { IVPU_HW_IP_37XX, "intel/vpu/vpu_37xx_v0.0.bin" }, - { IVPU_HW_IP_40XX, "vpu_40xx.bin" }, + { IVPU_HW_IP_40XX, "intel/vpu/vpu_40xx_v1.bin" }, { IVPU_HW_IP_40XX, "intel/vpu/vpu_40xx_v0.0.bin" }, - { IVPU_HW_IP_50XX, "vpu_50xx.bin" }, + { IVPU_HW_IP_50XX, "intel/vpu/vpu_50xx_v1.bin" }, { IVPU_HW_IP_50XX, "intel/vpu/vpu_50xx_v0.0.bin" }, }; /* Production fw_names from the table above */ -MODULE_FIRMWARE("intel/vpu/vpu_37xx_v0.0.bin"); -MODULE_FIRMWARE("intel/vpu/vpu_40xx_v0.0.bin"); -MODULE_FIRMWARE("intel/vpu/vpu_50xx_v0.0.bin"); +MODULE_FIRMWARE("intel/vpu/vpu_37xx_v1.bin"); +MODULE_FIRMWARE("intel/vpu/vpu_40xx_v1.bin"); +MODULE_FIRMWARE("intel/vpu/vpu_50xx_v1.bin"); static int ivpu_fw_request(struct ivpu_device *vdev) { -- 2.45.1

3 months, 2 weeks

3
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025