May 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] vmxnet3: update MTU after device quiesce" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 43f0999af011fba646e015f0bb08b6c3002a0170 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052424-banjo-exorcist-8407@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 43f0999af011fba646e015f0bb08b6c3002a0170 Mon Sep 17 00:00:00 2001 From: Ronak Doshi <ronak.doshi(a)broadcom.com> Date: Thu, 15 May 2025 19:04:56 +0000 Subject: [PATCH] vmxnet3: update MTU after device quiesce Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces the device and then reactivates it for the ESXi to know about the new mtu. So, technically the OS stack can start using the new mtu before ESXi knows about the new mtu. This can lead to issues for TSO packets which use mss as per the new mtu configured. This patch fixes this issue by moving the mtu write after device quiesce. Cc: stable(a)vger.kernel.org Fixes: d1a890fa37f2 ("net: VMware virtual Ethernet NIC driver: vmxnet3") Signed-off-by: Ronak Doshi <ronak.doshi(a)broadcom.com> Acked-by: Guolin Yang <guolin.yang(a)broadcom.com> Changes v1-> v2: Moved MTU write after destroy of rx rings Link: https://patch.msgid.link/20250515190457.8597-1-ronak.doshi@broadcom.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 3df6aabc7e33..c676979c7ab9 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -3607,8 +3607,6 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu) struct vmxnet3_adapter *adapter = netdev_priv(netdev); int err = 0; - WRITE_ONCE(netdev->mtu, new_mtu); - /* * Reset_work may be in the middle of resetting the device, wait for its * completion. @@ -3622,6 +3620,7 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu) /* we need to re-create the rx queue based on the new mtu */ vmxnet3_rq_destroy_all(adapter); + WRITE_ONCE(netdev->mtu, new_mtu); vmxnet3_adjust_rx_ring_size(adapter); err = vmxnet3_rq_create_all(adapter); if (err) { @@ -3638,6 +3637,8 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu) "Closing it\n", err); goto out; } + } else { + WRITE_ONCE(netdev->mtu, new_mtu); } out:

2 weeks

1
0
0 0

FAILED: patch "[PATCH] net: dsa: microchip: linearize skb for tail-tagging switches" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x ba54bce747fa9e07896c1abd9b48545f7b4b31d2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052402-concrete-panorama-6840@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ba54bce747fa9e07896c1abd9b48545f7b4b31d2 Mon Sep 17 00:00:00 2001 From: Jakob Unterwurzacher <jakobunt(a)gmail.com> Date: Thu, 15 May 2025 09:29:19 +0200 Subject: [PATCH] net: dsa: microchip: linearize skb for tail-tagging switches The pointer arithmentic for accessing the tail tag only works for linear skbs. For nonlinear skbs, it reads uninitialized memory inside the skb headroom, essentially randomizing the tag. I have observed it gets set to 6 most of the time. Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6 (which does not exist for the ksz9896 that's in use), dropping the packet. Debug prints added by me (not included in this patch): [ 256.645337] ksz9477_rcv:323 tag0=6 [ 256.645349] skb len=47 headroom=78 headlen=0 tailroom=0 mac=(64,14) mac_len=14 net=(78,0) trans=78 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x00f8 pkttype=1 iif=3 priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 256.645377] dev name=end1 feat=0x0002e10200114bb3 [ 256.645386] skb headroom: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645395] skb headroom: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645403] skb headroom: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645411] skb headroom: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645420] skb headroom: 00000040: ff ff ff ff ff ff 00 1c 19 f2 e2 db 08 06 [ 256.645428] skb frag: 00000000: 00 01 08 00 06 04 00 01 00 1c 19 f2 e2 db 0a 02 [ 256.645436] skb frag: 00000010: 00 83 00 00 00 00 00 00 0a 02 a0 2f 00 00 00 00 [ 256.645444] skb frag: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 [ 256.645452] ksz_common_rcv:92 dsa_conduit_find_user returned NULL Call skb_linearize before trying to access the tag. This patch fixes ksz9477_rcv which is used by the ksz9896 I have at hand, and also applies the same fix to ksz8795_rcv which seems to have the same problem. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher(a)cherry.de> CC: stable(a)vger.kernel.org Fixes: 016e43a26bab ("net: dsa: ksz: Add KSZ8795 tag code") Fixes: 8b8010fb7876 ("dsa: add support for Microchip KSZ tail tagging") Reviewed-by: Vladimir Oltean <olteanv(a)gmail.com> Link: https://patch.msgid.link/20250515072920.2313014-1-jakob.unterwurzacher@cher… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c index c33d4bf17929..0b7564b53790 100644 --- a/net/dsa/tag_ksz.c +++ b/net/dsa/tag_ksz.c @@ -140,7 +140,12 @@ static struct sk_buff *ksz8795_xmit(struct sk_buff *skb, struct net_device *dev) static struct sk_buff *ksz8795_rcv(struct sk_buff *skb, struct net_device *dev) { - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; return ksz_common_rcv(skb, dev, tag[0] & KSZ8795_TAIL_TAG_EG_PORT_M, KSZ_EGRESS_TAG_LEN); @@ -311,10 +316,16 @@ static struct sk_buff *ksz9477_xmit(struct sk_buff *skb, static struct sk_buff *ksz9477_rcv(struct sk_buff *skb, struct net_device *dev) { - /* Tag decoding */ - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; - unsigned int port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; unsigned int len = KSZ_EGRESS_TAG_LEN; + unsigned int port; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + /* Tag decoding */ + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; /* Extra 4-bytes PTP timestamp */ if (tag[0] & KSZ9477_PTP_TAG_INDICATION) {

2 weeks

1
0
0 0

FAILED: patch "[PATCH] net: dsa: microchip: linearize skb for tail-tagging switches" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x ba54bce747fa9e07896c1abd9b48545f7b4b31d2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052401-envious-gossip-9e66@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ba54bce747fa9e07896c1abd9b48545f7b4b31d2 Mon Sep 17 00:00:00 2001 From: Jakob Unterwurzacher <jakobunt(a)gmail.com> Date: Thu, 15 May 2025 09:29:19 +0200 Subject: [PATCH] net: dsa: microchip: linearize skb for tail-tagging switches The pointer arithmentic for accessing the tail tag only works for linear skbs. For nonlinear skbs, it reads uninitialized memory inside the skb headroom, essentially randomizing the tag. I have observed it gets set to 6 most of the time. Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6 (which does not exist for the ksz9896 that's in use), dropping the packet. Debug prints added by me (not included in this patch): [ 256.645337] ksz9477_rcv:323 tag0=6 [ 256.645349] skb len=47 headroom=78 headlen=0 tailroom=0 mac=(64,14) mac_len=14 net=(78,0) trans=78 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x00f8 pkttype=1 iif=3 priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 256.645377] dev name=end1 feat=0x0002e10200114bb3 [ 256.645386] skb headroom: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645395] skb headroom: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645403] skb headroom: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645411] skb headroom: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645420] skb headroom: 00000040: ff ff ff ff ff ff 00 1c 19 f2 e2 db 08 06 [ 256.645428] skb frag: 00000000: 00 01 08 00 06 04 00 01 00 1c 19 f2 e2 db 0a 02 [ 256.645436] skb frag: 00000010: 00 83 00 00 00 00 00 00 0a 02 a0 2f 00 00 00 00 [ 256.645444] skb frag: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 [ 256.645452] ksz_common_rcv:92 dsa_conduit_find_user returned NULL Call skb_linearize before trying to access the tag. This patch fixes ksz9477_rcv which is used by the ksz9896 I have at hand, and also applies the same fix to ksz8795_rcv which seems to have the same problem. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher(a)cherry.de> CC: stable(a)vger.kernel.org Fixes: 016e43a26bab ("net: dsa: ksz: Add KSZ8795 tag code") Fixes: 8b8010fb7876 ("dsa: add support for Microchip KSZ tail tagging") Reviewed-by: Vladimir Oltean <olteanv(a)gmail.com> Link: https://patch.msgid.link/20250515072920.2313014-1-jakob.unterwurzacher@cher… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c index c33d4bf17929..0b7564b53790 100644 --- a/net/dsa/tag_ksz.c +++ b/net/dsa/tag_ksz.c @@ -140,7 +140,12 @@ static struct sk_buff *ksz8795_xmit(struct sk_buff *skb, struct net_device *dev) static struct sk_buff *ksz8795_rcv(struct sk_buff *skb, struct net_device *dev) { - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; return ksz_common_rcv(skb, dev, tag[0] & KSZ8795_TAIL_TAG_EG_PORT_M, KSZ_EGRESS_TAG_LEN); @@ -311,10 +316,16 @@ static struct sk_buff *ksz9477_xmit(struct sk_buff *skb, static struct sk_buff *ksz9477_rcv(struct sk_buff *skb, struct net_device *dev) { - /* Tag decoding */ - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; - unsigned int port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; unsigned int len = KSZ_EGRESS_TAG_LEN; + unsigned int port; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + /* Tag decoding */ + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; /* Extra 4-bytes PTP timestamp */ if (tag[0] & KSZ9477_PTP_TAG_INDICATION) {

2 weeks

1
0
0 0

FAILED: patch "[PATCH] net: dsa: microchip: linearize skb for tail-tagging switches" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x ba54bce747fa9e07896c1abd9b48545f7b4b31d2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052400-backpack-superior-fb22@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ba54bce747fa9e07896c1abd9b48545f7b4b31d2 Mon Sep 17 00:00:00 2001 From: Jakob Unterwurzacher <jakobunt(a)gmail.com> Date: Thu, 15 May 2025 09:29:19 +0200 Subject: [PATCH] net: dsa: microchip: linearize skb for tail-tagging switches The pointer arithmentic for accessing the tail tag only works for linear skbs. For nonlinear skbs, it reads uninitialized memory inside the skb headroom, essentially randomizing the tag. I have observed it gets set to 6 most of the time. Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6 (which does not exist for the ksz9896 that's in use), dropping the packet. Debug prints added by me (not included in this patch): [ 256.645337] ksz9477_rcv:323 tag0=6 [ 256.645349] skb len=47 headroom=78 headlen=0 tailroom=0 mac=(64,14) mac_len=14 net=(78,0) trans=78 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x00f8 pkttype=1 iif=3 priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 256.645377] dev name=end1 feat=0x0002e10200114bb3 [ 256.645386] skb headroom: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645395] skb headroom: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645403] skb headroom: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645411] skb headroom: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645420] skb headroom: 00000040: ff ff ff ff ff ff 00 1c 19 f2 e2 db 08 06 [ 256.645428] skb frag: 00000000: 00 01 08 00 06 04 00 01 00 1c 19 f2 e2 db 0a 02 [ 256.645436] skb frag: 00000010: 00 83 00 00 00 00 00 00 0a 02 a0 2f 00 00 00 00 [ 256.645444] skb frag: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 [ 256.645452] ksz_common_rcv:92 dsa_conduit_find_user returned NULL Call skb_linearize before trying to access the tag. This patch fixes ksz9477_rcv which is used by the ksz9896 I have at hand, and also applies the same fix to ksz8795_rcv which seems to have the same problem. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher(a)cherry.de> CC: stable(a)vger.kernel.org Fixes: 016e43a26bab ("net: dsa: ksz: Add KSZ8795 tag code") Fixes: 8b8010fb7876 ("dsa: add support for Microchip KSZ tail tagging") Reviewed-by: Vladimir Oltean <olteanv(a)gmail.com> Link: https://patch.msgid.link/20250515072920.2313014-1-jakob.unterwurzacher@cher… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c index c33d4bf17929..0b7564b53790 100644 --- a/net/dsa/tag_ksz.c +++ b/net/dsa/tag_ksz.c @@ -140,7 +140,12 @@ static struct sk_buff *ksz8795_xmit(struct sk_buff *skb, struct net_device *dev) static struct sk_buff *ksz8795_rcv(struct sk_buff *skb, struct net_device *dev) { - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; return ksz_common_rcv(skb, dev, tag[0] & KSZ8795_TAIL_TAG_EG_PORT_M, KSZ_EGRESS_TAG_LEN); @@ -311,10 +316,16 @@ static struct sk_buff *ksz9477_xmit(struct sk_buff *skb, static struct sk_buff *ksz9477_rcv(struct sk_buff *skb, struct net_device *dev) { - /* Tag decoding */ - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; - unsigned int port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; unsigned int len = KSZ_EGRESS_TAG_LEN; + unsigned int port; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + /* Tag decoding */ + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; /* Extra 4-bytes PTP timestamp */ if (tag[0] & KSZ9477_PTP_TAG_INDICATION) {

2 weeks

1
0
0 0

FAILED: patch "[PATCH] net: dsa: microchip: linearize skb for tail-tagging switches" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x ba54bce747fa9e07896c1abd9b48545f7b4b31d2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052458-escapable-extended-8ea5@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ba54bce747fa9e07896c1abd9b48545f7b4b31d2 Mon Sep 17 00:00:00 2001 From: Jakob Unterwurzacher <jakobunt(a)gmail.com> Date: Thu, 15 May 2025 09:29:19 +0200 Subject: [PATCH] net: dsa: microchip: linearize skb for tail-tagging switches The pointer arithmentic for accessing the tail tag only works for linear skbs. For nonlinear skbs, it reads uninitialized memory inside the skb headroom, essentially randomizing the tag. I have observed it gets set to 6 most of the time. Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6 (which does not exist for the ksz9896 that's in use), dropping the packet. Debug prints added by me (not included in this patch): [ 256.645337] ksz9477_rcv:323 tag0=6 [ 256.645349] skb len=47 headroom=78 headlen=0 tailroom=0 mac=(64,14) mac_len=14 net=(78,0) trans=78 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x00f8 pkttype=1 iif=3 priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 256.645377] dev name=end1 feat=0x0002e10200114bb3 [ 256.645386] skb headroom: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645395] skb headroom: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645403] skb headroom: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645411] skb headroom: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645420] skb headroom: 00000040: ff ff ff ff ff ff 00 1c 19 f2 e2 db 08 06 [ 256.645428] skb frag: 00000000: 00 01 08 00 06 04 00 01 00 1c 19 f2 e2 db 0a 02 [ 256.645436] skb frag: 00000010: 00 83 00 00 00 00 00 00 0a 02 a0 2f 00 00 00 00 [ 256.645444] skb frag: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 [ 256.645452] ksz_common_rcv:92 dsa_conduit_find_user returned NULL Call skb_linearize before trying to access the tag. This patch fixes ksz9477_rcv which is used by the ksz9896 I have at hand, and also applies the same fix to ksz8795_rcv which seems to have the same problem. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher(a)cherry.de> CC: stable(a)vger.kernel.org Fixes: 016e43a26bab ("net: dsa: ksz: Add KSZ8795 tag code") Fixes: 8b8010fb7876 ("dsa: add support for Microchip KSZ tail tagging") Reviewed-by: Vladimir Oltean <olteanv(a)gmail.com> Link: https://patch.msgid.link/20250515072920.2313014-1-jakob.unterwurzacher@cher… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c index c33d4bf17929..0b7564b53790 100644 --- a/net/dsa/tag_ksz.c +++ b/net/dsa/tag_ksz.c @@ -140,7 +140,12 @@ static struct sk_buff *ksz8795_xmit(struct sk_buff *skb, struct net_device *dev) static struct sk_buff *ksz8795_rcv(struct sk_buff *skb, struct net_device *dev) { - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; return ksz_common_rcv(skb, dev, tag[0] & KSZ8795_TAIL_TAG_EG_PORT_M, KSZ_EGRESS_TAG_LEN); @@ -311,10 +316,16 @@ static struct sk_buff *ksz9477_xmit(struct sk_buff *skb, static struct sk_buff *ksz9477_rcv(struct sk_buff *skb, struct net_device *dev) { - /* Tag decoding */ - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; - unsigned int port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; unsigned int len = KSZ_EGRESS_TAG_LEN; + unsigned int port; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + /* Tag decoding */ + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; /* Extra 4-bytes PTP timestamp */ if (tag[0] & KSZ9477_PTP_TAG_INDICATION) {

2 weeks

1
0
0 0

FAILED: patch "[PATCH] net: dsa: microchip: linearize skb for tail-tagging switches" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x ba54bce747fa9e07896c1abd9b48545f7b4b31d2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052457-rise-remodeler-f63d@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ba54bce747fa9e07896c1abd9b48545f7b4b31d2 Mon Sep 17 00:00:00 2001 From: Jakob Unterwurzacher <jakobunt(a)gmail.com> Date: Thu, 15 May 2025 09:29:19 +0200 Subject: [PATCH] net: dsa: microchip: linearize skb for tail-tagging switches The pointer arithmentic for accessing the tail tag only works for linear skbs. For nonlinear skbs, it reads uninitialized memory inside the skb headroom, essentially randomizing the tag. I have observed it gets set to 6 most of the time. Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6 (which does not exist for the ksz9896 that's in use), dropping the packet. Debug prints added by me (not included in this patch): [ 256.645337] ksz9477_rcv:323 tag0=6 [ 256.645349] skb len=47 headroom=78 headlen=0 tailroom=0 mac=(64,14) mac_len=14 net=(78,0) trans=78 shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0)) csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x00f8 pkttype=1 iif=3 priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0 encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0) [ 256.645377] dev name=end1 feat=0x0002e10200114bb3 [ 256.645386] skb headroom: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645395] skb headroom: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645403] skb headroom: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645411] skb headroom: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 256.645420] skb headroom: 00000040: ff ff ff ff ff ff 00 1c 19 f2 e2 db 08 06 [ 256.645428] skb frag: 00000000: 00 01 08 00 06 04 00 01 00 1c 19 f2 e2 db 0a 02 [ 256.645436] skb frag: 00000010: 00 83 00 00 00 00 00 00 0a 02 a0 2f 00 00 00 00 [ 256.645444] skb frag: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 [ 256.645452] ksz_common_rcv:92 dsa_conduit_find_user returned NULL Call skb_linearize before trying to access the tag. This patch fixes ksz9477_rcv which is used by the ksz9896 I have at hand, and also applies the same fix to ksz8795_rcv which seems to have the same problem. Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher(a)cherry.de> CC: stable(a)vger.kernel.org Fixes: 016e43a26bab ("net: dsa: ksz: Add KSZ8795 tag code") Fixes: 8b8010fb7876 ("dsa: add support for Microchip KSZ tail tagging") Reviewed-by: Vladimir Oltean <olteanv(a)gmail.com> Link: https://patch.msgid.link/20250515072920.2313014-1-jakob.unterwurzacher@cher… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/dsa/tag_ksz.c b/net/dsa/tag_ksz.c index c33d4bf17929..0b7564b53790 100644 --- a/net/dsa/tag_ksz.c +++ b/net/dsa/tag_ksz.c @@ -140,7 +140,12 @@ static struct sk_buff *ksz8795_xmit(struct sk_buff *skb, struct net_device *dev) static struct sk_buff *ksz8795_rcv(struct sk_buff *skb, struct net_device *dev) { - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; return ksz_common_rcv(skb, dev, tag[0] & KSZ8795_TAIL_TAG_EG_PORT_M, KSZ_EGRESS_TAG_LEN); @@ -311,10 +316,16 @@ static struct sk_buff *ksz9477_xmit(struct sk_buff *skb, static struct sk_buff *ksz9477_rcv(struct sk_buff *skb, struct net_device *dev) { - /* Tag decoding */ - u8 *tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; - unsigned int port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; unsigned int len = KSZ_EGRESS_TAG_LEN; + unsigned int port; + u8 *tag; + + if (skb_linearize(skb)) + return NULL; + + /* Tag decoding */ + tag = skb_tail_pointer(skb) - KSZ_EGRESS_TAG_LEN; + port = tag[0] & KSZ9477_TAIL_TAG_EG_PORT_M; /* Extra 4-bytes PTP timestamp */ if (tag[0] & KSZ9477_PTP_TAG_INDICATION) {

2 weeks

1
0
0 0

FAILED: patch "[PATCH] ALSA: hda/realtek: Add support for HP Agusta using CS35L41" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 7150d57c370f9e61b7d0e82c58002f1c5a205ac4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052431-scorer-rebuild-b36a@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7150d57c370f9e61b7d0e82c58002f1c5a205ac4 Mon Sep 17 00:00:00 2001 From: Stefan Binding <sbinding(a)opensource.cirrus.com> Date: Tue, 20 May 2025 13:47:43 +0100 Subject: [PATCH] ALSA: hda/realtek: Add support for HP Agusta using CS35L41 HDA Add support for HP Agusta. Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C Signed-off-by: Stefan Binding <sbinding(a)opensource.cirrus.com> Cc: <stable(a)vger.kernel.org> Link: https://patch.msgid.link/20250520124757.12597-1-sbinding@opensource.cirrus.… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a426d9882702..69788dd9a1ec 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10888,6 +10888,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8e2c, "HP EliteBook 16 G12", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8e36, "HP 14 Enstrom OmniBook X", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e37, "HP 16 Piston OmniBook X", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x103c, 0x8e3a, "HP Agusta", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x103c, 0x8e3b, "HP Agusta", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e60, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e61, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e62, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2),

2 weeks

1
0
0 0

FAILED: patch "[PATCH] ALSA: hda/realtek: Add support for HP Agusta using CS35L41" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 7150d57c370f9e61b7d0e82c58002f1c5a205ac4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052431-padding-scalping-8aae@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7150d57c370f9e61b7d0e82c58002f1c5a205ac4 Mon Sep 17 00:00:00 2001 From: Stefan Binding <sbinding(a)opensource.cirrus.com> Date: Tue, 20 May 2025 13:47:43 +0100 Subject: [PATCH] ALSA: hda/realtek: Add support for HP Agusta using CS35L41 HDA Add support for HP Agusta. Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C Signed-off-by: Stefan Binding <sbinding(a)opensource.cirrus.com> Cc: <stable(a)vger.kernel.org> Link: https://patch.msgid.link/20250520124757.12597-1-sbinding@opensource.cirrus.… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a426d9882702..69788dd9a1ec 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10888,6 +10888,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8e2c, "HP EliteBook 16 G12", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8e36, "HP 14 Enstrom OmniBook X", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e37, "HP 16 Piston OmniBook X", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x103c, 0x8e3a, "HP Agusta", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x103c, 0x8e3b, "HP Agusta", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e60, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e61, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e62, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2),

2 weeks

1
0
0 0

FAILED: patch "[PATCH] ALSA: hda/realtek: Add support for HP Agusta using CS35L41" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 7150d57c370f9e61b7d0e82c58002f1c5a205ac4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052430-reoccupy-unbroken-8b7d@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7150d57c370f9e61b7d0e82c58002f1c5a205ac4 Mon Sep 17 00:00:00 2001 From: Stefan Binding <sbinding(a)opensource.cirrus.com> Date: Tue, 20 May 2025 13:47:43 +0100 Subject: [PATCH] ALSA: hda/realtek: Add support for HP Agusta using CS35L41 HDA Add support for HP Agusta. Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C Signed-off-by: Stefan Binding <sbinding(a)opensource.cirrus.com> Cc: <stable(a)vger.kernel.org> Link: https://patch.msgid.link/20250520124757.12597-1-sbinding@opensource.cirrus.… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a426d9882702..69788dd9a1ec 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10888,6 +10888,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8e2c, "HP EliteBook 16 G12", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8e36, "HP 14 Enstrom OmniBook X", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e37, "HP 16 Piston OmniBook X", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x103c, 0x8e3a, "HP Agusta", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x103c, 0x8e3b, "HP Agusta", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e60, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e61, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e62, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2),

2 weeks

1
0
0 0

FAILED: patch "[PATCH] ALSA: hda/realtek: Add support for HP Agusta using CS35L41" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 7150d57c370f9e61b7d0e82c58002f1c5a205ac4 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052430-fable-scratch-0fa5@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7150d57c370f9e61b7d0e82c58002f1c5a205ac4 Mon Sep 17 00:00:00 2001 From: Stefan Binding <sbinding(a)opensource.cirrus.com> Date: Tue, 20 May 2025 13:47:43 +0100 Subject: [PATCH] ALSA: hda/realtek: Add support for HP Agusta using CS35L41 HDA Add support for HP Agusta. Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C Signed-off-by: Stefan Binding <sbinding(a)opensource.cirrus.com> Cc: <stable(a)vger.kernel.org> Link: https://patch.msgid.link/20250520124757.12597-1-sbinding@opensource.cirrus.… Signed-off-by: Takashi Iwai <tiwai(a)suse.de> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a426d9882702..69788dd9a1ec 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10888,6 +10888,8 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x8e2c, "HP EliteBook 16 G12", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8e36, "HP 14 Enstrom OmniBook X", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e37, "HP 16 Piston OmniBook X", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x103c, 0x8e3a, "HP Agusta", ALC287_FIXUP_CS35L41_I2C_2), + SND_PCI_QUIRK(0x103c, 0x8e3b, "HP Agusta", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e60, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e61, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2), SND_PCI_QUIRK(0x103c, 0x8e62, "HP Trekker ", ALC287_FIXUP_CS35L41_I2C_2),

2 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025