October 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] iio: imu: inv_icm42600: Simplify pm_runtime setup" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 0792c1984a45ccd7a296d6b8cb78088bc99a212e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101601-manicure-opposite-4330@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0792c1984a45ccd7a296d6b8cb78088bc99a212e Mon Sep 17 00:00:00 2001 From: Sean Nyekjaer <sean(a)geanix.com> Date: Mon, 1 Sep 2025 09:49:13 +0200 Subject: [PATCH] iio: imu: inv_icm42600: Simplify pm_runtime setup Rework the power management in inv_icm42600_core_probe() to use devm_pm_runtime_set_active_enabled(), which simplifies the runtime PM setup by handling activation and enabling in one step. Remove the separate inv_icm42600_disable_pm callback, as it's no longer needed with the devm-managed approach. Using devm_pm_runtime_enable() also fixes the missing disable of autosuspend. Update inv_icm42600_disable_vddio_reg() to only disable the regulator if the device is not suspended i.e. powered-down, preventing unbalanced disables. Also remove redundant error msg on regulator_disable(), the regulator framework already emits an error message when regulator_disable() fails. This simplifies the PM setup and avoids manipulating the usage counter unnecessarily. Fixes: 31c24c1e93c3 ("iio: imu: inv_icm42600: add core of new inv_icm42600 driver") Signed-off-by: Sean Nyekjaer <sean(a)geanix.com> Link: https://patch.msgid.link/20250901-icm42pmreg-v3-1-ef1336246960@geanix.com Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c index a4d42e7e2180..76d8e4f14d87 100644 --- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c @@ -711,20 +711,12 @@ static void inv_icm42600_disable_vdd_reg(void *_data) static void inv_icm42600_disable_vddio_reg(void *_data) { struct inv_icm42600_state *st = _data; - const struct device *dev = regmap_get_device(st->map); - int ret; + struct device *dev = regmap_get_device(st->map); - ret = regulator_disable(st->vddio_supply); - if (ret) - dev_err(dev, "failed to disable vddio error %d\n", ret); -} + if (pm_runtime_status_suspended(dev)) + return; -static void inv_icm42600_disable_pm(void *_data) -{ - struct device *dev = _data; - - pm_runtime_put_sync(dev); - pm_runtime_disable(dev); + regulator_disable(st->vddio_supply); } int inv_icm42600_core_probe(struct regmap *regmap, int chip, @@ -824,16 +816,14 @@ int inv_icm42600_core_probe(struct regmap *regmap, int chip, return ret; /* setup runtime power management */ - ret = pm_runtime_set_active(dev); + ret = devm_pm_runtime_set_active_enabled(dev); if (ret) return ret; - pm_runtime_get_noresume(dev); - pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, INV_ICM42600_SUSPEND_DELAY_MS); pm_runtime_use_autosuspend(dev); - pm_runtime_put(dev); - return devm_add_action_or_reset(dev, inv_icm42600_disable_pm, dev); + return ret; } EXPORT_SYMBOL_NS_GPL(inv_icm42600_core_probe, "IIO_ICM42600");

2 weeks, 3 days

2
2
0 0

FAILED: patch "[PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 284fb19a3ffb1083c3ad9c00d29749d09dddb99c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101614-sphere-flagman-052d@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 284fb19a3ffb1083c3ad9c00d29749d09dddb99c Mon Sep 17 00:00:00 2001 From: Devarsh Thakkar <devarsht(a)ti.com> Date: Fri, 4 Jul 2025 18:29:14 +0530 Subject: [PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling PLL lockup and O_CMN_READY assertion can only happen after common state machine gets enabled by programming DPHY_CMN_SSM register, but driver was polling them before the common state machine was enabled which is incorrect. This is as per the DPHY initialization sequence as mentioned in J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram". It shows O_CMN_READY polling at the end after common configuration pin setup where the common configuration pin setup step enables state machine as referenced in "Table 12-1533. Common Configuration-Related Setup mentions state machine" To fix this : - Add new function callbacks for polling on PLL lock and O_CMN_READY assertion. - As state machine and clocks get enabled in power_on callback only, move the clock related programming part from configure callback to power_on callback and poll for the PLL lockup and O_CMN_READY assertion after state machine gets enabled. - The configure callback only saves the PLL configuration received from the client driver which will be applied later on in power_on callback. - Add checks to ensure configure is called before power_on and state machine is in disabled state before power_on callback is called. - Disable state machine in power_off so that client driver can re-configure the PLL by following up a power_off, configure, power_on sequence. [1]: https://www.ti.com/lit/zip/spruil1 Cc: stable(a)vger.kernel.org Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht(a)ti.com> Tested-by: Harikrishna Shenoy <h-shenoy(a)ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c index 33a42e72362e..da8de0a9d086 100644 --- a/drivers/phy/cadence/cdns-dphy.c +++ b/drivers/phy/cadence/cdns-dphy.c @@ -92,6 +92,8 @@ struct cdns_dphy_ops { void (*set_pll_cfg)(struct cdns_dphy *dphy, const struct cdns_dphy_cfg *cfg); unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy); + int (*wait_for_pll_lock)(struct cdns_dphy *dphy); + int (*wait_for_cmn_ready)(struct cdns_dphy *dphy); }; struct cdns_dphy { @@ -101,6 +103,8 @@ struct cdns_dphy { struct clk *pll_ref_clk; const struct cdns_dphy_ops *ops; struct phy *phy; + bool is_configured; + bool is_powered; }; /* Order of bands is important since the index is the band number. */ @@ -186,6 +190,16 @@ static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy) return dphy->ops->get_wakeup_time_ns(dphy); } +static int cdns_dphy_wait_for_pll_lock(struct cdns_dphy *dphy) +{ + return dphy->ops->wait_for_pll_lock ? dphy->ops->wait_for_pll_lock(dphy) : 0; +} + +static int cdns_dphy_wait_for_cmn_ready(struct cdns_dphy *dphy) +{ + return dphy->ops->wait_for_cmn_ready ? dphy->ops->wait_for_cmn_ready(dphy) : 0; +} + static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy) { /* Default wakeup time is 800 ns (in a simulated environment). */ @@ -227,7 +241,6 @@ static unsigned long cdns_dphy_j721e_get_wakeup_time_ns(struct cdns_dphy *dphy) static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy, const struct cdns_dphy_cfg *cfg) { - u32 status; /* * set the PWM and PLL Byteclk divider settings to recommended values @@ -244,13 +257,6 @@ static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy, writel(DPHY_TX_J721E_WIZ_LANE_RSTB, dphy->regs + DPHY_TX_J721E_WIZ_RST_CTRL); - - readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status, - (status & DPHY_TX_WIZ_PLL_LOCK), 0, POLL_TIMEOUT_US); - - readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status, - (status & DPHY_TX_WIZ_O_CMN_READY), 0, - POLL_TIMEOUT_US); } static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div) @@ -258,6 +264,23 @@ static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div) writel(div, dphy->regs + DPHY_TX_J721E_WIZ_PSM_FREQ); } +static int cdns_dphy_j721e_wait_for_pll_lock(struct cdns_dphy *dphy) +{ + u32 status; + + return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status, + status & DPHY_TX_WIZ_PLL_LOCK, 0, POLL_TIMEOUT_US); +} + +static int cdns_dphy_j721e_wait_for_cmn_ready(struct cdns_dphy *dphy) +{ + u32 status; + + return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status, + status & DPHY_TX_WIZ_O_CMN_READY, 0, + POLL_TIMEOUT_US); +} + /* * This is the reference implementation of DPHY hooks. Specific integration of * this IP may have to re-implement some of them depending on how they decided @@ -273,6 +296,8 @@ static const struct cdns_dphy_ops j721e_dphy_ops = { .get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns, .set_pll_cfg = cdns_dphy_j721e_set_pll_cfg, .set_psm_div = cdns_dphy_j721e_set_psm_div, + .wait_for_pll_lock = cdns_dphy_j721e_wait_for_pll_lock, + .wait_for_cmn_ready = cdns_dphy_j721e_wait_for_cmn_ready, }; static int cdns_dphy_config_from_opts(struct phy *phy, @@ -328,21 +353,36 @@ static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode, static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts) { struct cdns_dphy *dphy = phy_get_drvdata(phy); - struct cdns_dphy_cfg cfg = { 0 }; - int ret, band_ctrl; - unsigned int reg; + int ret; - ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg); - if (ret) - return ret; + ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &dphy->cfg); + if (!ret) + dphy->is_configured = true; + + return ret; +} + +static int cdns_dphy_power_on(struct phy *phy) +{ + struct cdns_dphy *dphy = phy_get_drvdata(phy); + int ret; + u32 reg; + + if (!dphy->is_configured || dphy->is_powered) + return -EINVAL; + + clk_prepare_enable(dphy->psm_clk); + clk_prepare_enable(dphy->pll_ref_clk); /* * Configure the internal PSM clk divider so that the DPHY has a * 1MHz clk (or something close). */ ret = cdns_dphy_setup_psm(dphy); - if (ret) - return ret; + if (ret) { + dev_err(&dphy->phy->dev, "Failed to setup PSM with error %d\n", ret); + goto err_power_on; + } /* * Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes @@ -357,40 +397,60 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts) * Configure the DPHY PLL that will be used to generate the TX byte * clk. */ - cdns_dphy_set_pll_cfg(dphy, &cfg); + cdns_dphy_set_pll_cfg(dphy, &dphy->cfg); - band_ctrl = cdns_dphy_tx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate); - if (band_ctrl < 0) - return band_ctrl; + ret = cdns_dphy_tx_get_band_ctrl(dphy->cfg.hs_clk_rate); + if (ret < 0) { + dev_err(&dphy->phy->dev, "Failed to get band control value with error %d\n", ret); + goto err_power_on; + } - reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) | - FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl); + reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, ret) | + FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, ret); writel(reg, dphy->regs + DPHY_BAND_CFG); - return 0; -} - -static int cdns_dphy_power_on(struct phy *phy) -{ - struct cdns_dphy *dphy = phy_get_drvdata(phy); - - clk_prepare_enable(dphy->psm_clk); - clk_prepare_enable(dphy->pll_ref_clk); - /* Start TX state machine. */ writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN, dphy->regs + DPHY_CMN_SSM); + ret = cdns_dphy_wait_for_pll_lock(dphy); + if (ret) { + dev_err(&dphy->phy->dev, "Failed to lock PLL with error %d\n", ret); + goto err_power_on; + } + + ret = cdns_dphy_wait_for_cmn_ready(dphy); + if (ret) { + dev_err(&dphy->phy->dev, "O_CMN_READY signal failed to assert with error %d\n", + ret); + goto err_power_on; + } + + dphy->is_powered = true; + return 0; + +err_power_on: + clk_disable_unprepare(dphy->pll_ref_clk); + clk_disable_unprepare(dphy->psm_clk); + + return ret; } static int cdns_dphy_power_off(struct phy *phy) { struct cdns_dphy *dphy = phy_get_drvdata(phy); + u32 reg; clk_disable_unprepare(dphy->pll_ref_clk); clk_disable_unprepare(dphy->psm_clk); + /* Stop TX state machine. */ + reg = readl(dphy->regs + DPHY_CMN_SSM); + writel(reg & ~DPHY_CMN_SSM_EN, dphy->regs + DPHY_CMN_SSM); + + dphy->is_powered = false; + return 0; }

2 weeks, 3 days

2
2
0 0

FAILED: patch "[PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 284fb19a3ffb1083c3ad9c00d29749d09dddb99c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101614-lisp-bucktooth-cc0e@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 284fb19a3ffb1083c3ad9c00d29749d09dddb99c Mon Sep 17 00:00:00 2001 From: Devarsh Thakkar <devarsht(a)ti.com> Date: Fri, 4 Jul 2025 18:29:14 +0530 Subject: [PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling PLL lockup and O_CMN_READY assertion can only happen after common state machine gets enabled by programming DPHY_CMN_SSM register, but driver was polling them before the common state machine was enabled which is incorrect. This is as per the DPHY initialization sequence as mentioned in J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram". It shows O_CMN_READY polling at the end after common configuration pin setup where the common configuration pin setup step enables state machine as referenced in "Table 12-1533. Common Configuration-Related Setup mentions state machine" To fix this : - Add new function callbacks for polling on PLL lock and O_CMN_READY assertion. - As state machine and clocks get enabled in power_on callback only, move the clock related programming part from configure callback to power_on callback and poll for the PLL lockup and O_CMN_READY assertion after state machine gets enabled. - The configure callback only saves the PLL configuration received from the client driver which will be applied later on in power_on callback. - Add checks to ensure configure is called before power_on and state machine is in disabled state before power_on callback is called. - Disable state machine in power_off so that client driver can re-configure the PLL by following up a power_off, configure, power_on sequence. [1]: https://www.ti.com/lit/zip/spruil1 Cc: stable(a)vger.kernel.org Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht(a)ti.com> Tested-by: Harikrishna Shenoy <h-shenoy(a)ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c index 33a42e72362e..da8de0a9d086 100644 --- a/drivers/phy/cadence/cdns-dphy.c +++ b/drivers/phy/cadence/cdns-dphy.c @@ -92,6 +92,8 @@ struct cdns_dphy_ops { void (*set_pll_cfg)(struct cdns_dphy *dphy, const struct cdns_dphy_cfg *cfg); unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy); + int (*wait_for_pll_lock)(struct cdns_dphy *dphy); + int (*wait_for_cmn_ready)(struct cdns_dphy *dphy); }; struct cdns_dphy { @@ -101,6 +103,8 @@ struct cdns_dphy { struct clk *pll_ref_clk; const struct cdns_dphy_ops *ops; struct phy *phy; + bool is_configured; + bool is_powered; }; /* Order of bands is important since the index is the band number. */ @@ -186,6 +190,16 @@ static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy) return dphy->ops->get_wakeup_time_ns(dphy); } +static int cdns_dphy_wait_for_pll_lock(struct cdns_dphy *dphy) +{ + return dphy->ops->wait_for_pll_lock ? dphy->ops->wait_for_pll_lock(dphy) : 0; +} + +static int cdns_dphy_wait_for_cmn_ready(struct cdns_dphy *dphy) +{ + return dphy->ops->wait_for_cmn_ready ? dphy->ops->wait_for_cmn_ready(dphy) : 0; +} + static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy) { /* Default wakeup time is 800 ns (in a simulated environment). */ @@ -227,7 +241,6 @@ static unsigned long cdns_dphy_j721e_get_wakeup_time_ns(struct cdns_dphy *dphy) static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy, const struct cdns_dphy_cfg *cfg) { - u32 status; /* * set the PWM and PLL Byteclk divider settings to recommended values @@ -244,13 +257,6 @@ static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy, writel(DPHY_TX_J721E_WIZ_LANE_RSTB, dphy->regs + DPHY_TX_J721E_WIZ_RST_CTRL); - - readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status, - (status & DPHY_TX_WIZ_PLL_LOCK), 0, POLL_TIMEOUT_US); - - readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status, - (status & DPHY_TX_WIZ_O_CMN_READY), 0, - POLL_TIMEOUT_US); } static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div) @@ -258,6 +264,23 @@ static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div) writel(div, dphy->regs + DPHY_TX_J721E_WIZ_PSM_FREQ); } +static int cdns_dphy_j721e_wait_for_pll_lock(struct cdns_dphy *dphy) +{ + u32 status; + + return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status, + status & DPHY_TX_WIZ_PLL_LOCK, 0, POLL_TIMEOUT_US); +} + +static int cdns_dphy_j721e_wait_for_cmn_ready(struct cdns_dphy *dphy) +{ + u32 status; + + return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status, + status & DPHY_TX_WIZ_O_CMN_READY, 0, + POLL_TIMEOUT_US); +} + /* * This is the reference implementation of DPHY hooks. Specific integration of * this IP may have to re-implement some of them depending on how they decided @@ -273,6 +296,8 @@ static const struct cdns_dphy_ops j721e_dphy_ops = { .get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns, .set_pll_cfg = cdns_dphy_j721e_set_pll_cfg, .set_psm_div = cdns_dphy_j721e_set_psm_div, + .wait_for_pll_lock = cdns_dphy_j721e_wait_for_pll_lock, + .wait_for_cmn_ready = cdns_dphy_j721e_wait_for_cmn_ready, }; static int cdns_dphy_config_from_opts(struct phy *phy, @@ -328,21 +353,36 @@ static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode, static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts) { struct cdns_dphy *dphy = phy_get_drvdata(phy); - struct cdns_dphy_cfg cfg = { 0 }; - int ret, band_ctrl; - unsigned int reg; + int ret; - ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg); - if (ret) - return ret; + ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &dphy->cfg); + if (!ret) + dphy->is_configured = true; + + return ret; +} + +static int cdns_dphy_power_on(struct phy *phy) +{ + struct cdns_dphy *dphy = phy_get_drvdata(phy); + int ret; + u32 reg; + + if (!dphy->is_configured || dphy->is_powered) + return -EINVAL; + + clk_prepare_enable(dphy->psm_clk); + clk_prepare_enable(dphy->pll_ref_clk); /* * Configure the internal PSM clk divider so that the DPHY has a * 1MHz clk (or something close). */ ret = cdns_dphy_setup_psm(dphy); - if (ret) - return ret; + if (ret) { + dev_err(&dphy->phy->dev, "Failed to setup PSM with error %d\n", ret); + goto err_power_on; + } /* * Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes @@ -357,40 +397,60 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts) * Configure the DPHY PLL that will be used to generate the TX byte * clk. */ - cdns_dphy_set_pll_cfg(dphy, &cfg); + cdns_dphy_set_pll_cfg(dphy, &dphy->cfg); - band_ctrl = cdns_dphy_tx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate); - if (band_ctrl < 0) - return band_ctrl; + ret = cdns_dphy_tx_get_band_ctrl(dphy->cfg.hs_clk_rate); + if (ret < 0) { + dev_err(&dphy->phy->dev, "Failed to get band control value with error %d\n", ret); + goto err_power_on; + } - reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) | - FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl); + reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, ret) | + FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, ret); writel(reg, dphy->regs + DPHY_BAND_CFG); - return 0; -} - -static int cdns_dphy_power_on(struct phy *phy) -{ - struct cdns_dphy *dphy = phy_get_drvdata(phy); - - clk_prepare_enable(dphy->psm_clk); - clk_prepare_enable(dphy->pll_ref_clk); - /* Start TX state machine. */ writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN, dphy->regs + DPHY_CMN_SSM); + ret = cdns_dphy_wait_for_pll_lock(dphy); + if (ret) { + dev_err(&dphy->phy->dev, "Failed to lock PLL with error %d\n", ret); + goto err_power_on; + } + + ret = cdns_dphy_wait_for_cmn_ready(dphy); + if (ret) { + dev_err(&dphy->phy->dev, "O_CMN_READY signal failed to assert with error %d\n", + ret); + goto err_power_on; + } + + dphy->is_powered = true; + return 0; + +err_power_on: + clk_disable_unprepare(dphy->pll_ref_clk); + clk_disable_unprepare(dphy->psm_clk); + + return ret; } static int cdns_dphy_power_off(struct phy *phy) { struct cdns_dphy *dphy = phy_get_drvdata(phy); + u32 reg; clk_disable_unprepare(dphy->pll_ref_clk); clk_disable_unprepare(dphy->psm_clk); + /* Stop TX state machine. */ + reg = readl(dphy->regs + DPHY_CMN_SSM); + writel(reg & ~DPHY_CMN_SSM_EN, dphy->regs + DPHY_CMN_SSM); + + dphy->is_powered = false; + return 0; }

2 weeks, 3 days

2
2
0 0

FAILED: patch "[PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 284fb19a3ffb1083c3ad9c00d29749d09dddb99c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101613-trickery-snowless-db46@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 284fb19a3ffb1083c3ad9c00d29749d09dddb99c Mon Sep 17 00:00:00 2001 From: Devarsh Thakkar <devarsht(a)ti.com> Date: Fri, 4 Jul 2025 18:29:14 +0530 Subject: [PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling PLL lockup and O_CMN_READY assertion can only happen after common state machine gets enabled by programming DPHY_CMN_SSM register, but driver was polling them before the common state machine was enabled which is incorrect. This is as per the DPHY initialization sequence as mentioned in J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram". It shows O_CMN_READY polling at the end after common configuration pin setup where the common configuration pin setup step enables state machine as referenced in "Table 12-1533. Common Configuration-Related Setup mentions state machine" To fix this : - Add new function callbacks for polling on PLL lock and O_CMN_READY assertion. - As state machine and clocks get enabled in power_on callback only, move the clock related programming part from configure callback to power_on callback and poll for the PLL lockup and O_CMN_READY assertion after state machine gets enabled. - The configure callback only saves the PLL configuration received from the client driver which will be applied later on in power_on callback. - Add checks to ensure configure is called before power_on and state machine is in disabled state before power_on callback is called. - Disable state machine in power_off so that client driver can re-configure the PLL by following up a power_off, configure, power_on sequence. [1]: https://www.ti.com/lit/zip/spruil1 Cc: stable(a)vger.kernel.org Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht(a)ti.com> Tested-by: Harikrishna Shenoy <h-shenoy(a)ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c index 33a42e72362e..da8de0a9d086 100644 --- a/drivers/phy/cadence/cdns-dphy.c +++ b/drivers/phy/cadence/cdns-dphy.c @@ -92,6 +92,8 @@ struct cdns_dphy_ops { void (*set_pll_cfg)(struct cdns_dphy *dphy, const struct cdns_dphy_cfg *cfg); unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy); + int (*wait_for_pll_lock)(struct cdns_dphy *dphy); + int (*wait_for_cmn_ready)(struct cdns_dphy *dphy); }; struct cdns_dphy { @@ -101,6 +103,8 @@ struct cdns_dphy { struct clk *pll_ref_clk; const struct cdns_dphy_ops *ops; struct phy *phy; + bool is_configured; + bool is_powered; }; /* Order of bands is important since the index is the band number. */ @@ -186,6 +190,16 @@ static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy) return dphy->ops->get_wakeup_time_ns(dphy); } +static int cdns_dphy_wait_for_pll_lock(struct cdns_dphy *dphy) +{ + return dphy->ops->wait_for_pll_lock ? dphy->ops->wait_for_pll_lock(dphy) : 0; +} + +static int cdns_dphy_wait_for_cmn_ready(struct cdns_dphy *dphy) +{ + return dphy->ops->wait_for_cmn_ready ? dphy->ops->wait_for_cmn_ready(dphy) : 0; +} + static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy) { /* Default wakeup time is 800 ns (in a simulated environment). */ @@ -227,7 +241,6 @@ static unsigned long cdns_dphy_j721e_get_wakeup_time_ns(struct cdns_dphy *dphy) static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy, const struct cdns_dphy_cfg *cfg) { - u32 status; /* * set the PWM and PLL Byteclk divider settings to recommended values @@ -244,13 +257,6 @@ static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy, writel(DPHY_TX_J721E_WIZ_LANE_RSTB, dphy->regs + DPHY_TX_J721E_WIZ_RST_CTRL); - - readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status, - (status & DPHY_TX_WIZ_PLL_LOCK), 0, POLL_TIMEOUT_US); - - readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status, - (status & DPHY_TX_WIZ_O_CMN_READY), 0, - POLL_TIMEOUT_US); } static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div) @@ -258,6 +264,23 @@ static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div) writel(div, dphy->regs + DPHY_TX_J721E_WIZ_PSM_FREQ); } +static int cdns_dphy_j721e_wait_for_pll_lock(struct cdns_dphy *dphy) +{ + u32 status; + + return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status, + status & DPHY_TX_WIZ_PLL_LOCK, 0, POLL_TIMEOUT_US); +} + +static int cdns_dphy_j721e_wait_for_cmn_ready(struct cdns_dphy *dphy) +{ + u32 status; + + return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status, + status & DPHY_TX_WIZ_O_CMN_READY, 0, + POLL_TIMEOUT_US); +} + /* * This is the reference implementation of DPHY hooks. Specific integration of * this IP may have to re-implement some of them depending on how they decided @@ -273,6 +296,8 @@ static const struct cdns_dphy_ops j721e_dphy_ops = { .get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns, .set_pll_cfg = cdns_dphy_j721e_set_pll_cfg, .set_psm_div = cdns_dphy_j721e_set_psm_div, + .wait_for_pll_lock = cdns_dphy_j721e_wait_for_pll_lock, + .wait_for_cmn_ready = cdns_dphy_j721e_wait_for_cmn_ready, }; static int cdns_dphy_config_from_opts(struct phy *phy, @@ -328,21 +353,36 @@ static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode, static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts) { struct cdns_dphy *dphy = phy_get_drvdata(phy); - struct cdns_dphy_cfg cfg = { 0 }; - int ret, band_ctrl; - unsigned int reg; + int ret; - ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg); - if (ret) - return ret; + ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &dphy->cfg); + if (!ret) + dphy->is_configured = true; + + return ret; +} + +static int cdns_dphy_power_on(struct phy *phy) +{ + struct cdns_dphy *dphy = phy_get_drvdata(phy); + int ret; + u32 reg; + + if (!dphy->is_configured || dphy->is_powered) + return -EINVAL; + + clk_prepare_enable(dphy->psm_clk); + clk_prepare_enable(dphy->pll_ref_clk); /* * Configure the internal PSM clk divider so that the DPHY has a * 1MHz clk (or something close). */ ret = cdns_dphy_setup_psm(dphy); - if (ret) - return ret; + if (ret) { + dev_err(&dphy->phy->dev, "Failed to setup PSM with error %d\n", ret); + goto err_power_on; + } /* * Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes @@ -357,40 +397,60 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts) * Configure the DPHY PLL that will be used to generate the TX byte * clk. */ - cdns_dphy_set_pll_cfg(dphy, &cfg); + cdns_dphy_set_pll_cfg(dphy, &dphy->cfg); - band_ctrl = cdns_dphy_tx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate); - if (band_ctrl < 0) - return band_ctrl; + ret = cdns_dphy_tx_get_band_ctrl(dphy->cfg.hs_clk_rate); + if (ret < 0) { + dev_err(&dphy->phy->dev, "Failed to get band control value with error %d\n", ret); + goto err_power_on; + } - reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) | - FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl); + reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, ret) | + FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, ret); writel(reg, dphy->regs + DPHY_BAND_CFG); - return 0; -} - -static int cdns_dphy_power_on(struct phy *phy) -{ - struct cdns_dphy *dphy = phy_get_drvdata(phy); - - clk_prepare_enable(dphy->psm_clk); - clk_prepare_enable(dphy->pll_ref_clk); - /* Start TX state machine. */ writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN, dphy->regs + DPHY_CMN_SSM); + ret = cdns_dphy_wait_for_pll_lock(dphy); + if (ret) { + dev_err(&dphy->phy->dev, "Failed to lock PLL with error %d\n", ret); + goto err_power_on; + } + + ret = cdns_dphy_wait_for_cmn_ready(dphy); + if (ret) { + dev_err(&dphy->phy->dev, "O_CMN_READY signal failed to assert with error %d\n", + ret); + goto err_power_on; + } + + dphy->is_powered = true; + return 0; + +err_power_on: + clk_disable_unprepare(dphy->pll_ref_clk); + clk_disable_unprepare(dphy->psm_clk); + + return ret; } static int cdns_dphy_power_off(struct phy *phy) { struct cdns_dphy *dphy = phy_get_drvdata(phy); + u32 reg; clk_disable_unprepare(dphy->pll_ref_clk); clk_disable_unprepare(dphy->psm_clk); + /* Stop TX state machine. */ + reg = readl(dphy->regs + DPHY_CMN_SSM); + writel(reg & ~DPHY_CMN_SSM_EN, dphy->regs + DPHY_CMN_SSM); + + dphy->is_powered = false; + return 0; }

2 weeks, 3 days

2
2
0 0

FAILED: patch "[PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling" failed to apply to 6.17-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.17-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.17.y git checkout FETCH_HEAD git cherry-pick -x 284fb19a3ffb1083c3ad9c00d29749d09dddb99c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101612-arguable-crushed-0b89@gregkh' --subject-prefix 'PATCH 6.17.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 284fb19a3ffb1083c3ad9c00d29749d09dddb99c Mon Sep 17 00:00:00 2001 From: Devarsh Thakkar <devarsht(a)ti.com> Date: Fri, 4 Jul 2025 18:29:14 +0530 Subject: [PATCH] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling PLL lockup and O_CMN_READY assertion can only happen after common state machine gets enabled by programming DPHY_CMN_SSM register, but driver was polling them before the common state machine was enabled which is incorrect. This is as per the DPHY initialization sequence as mentioned in J721E TRM [1] at section "12.7.2.4.1.2.1 Start-up Sequence Timing Diagram". It shows O_CMN_READY polling at the end after common configuration pin setup where the common configuration pin setup step enables state machine as referenced in "Table 12-1533. Common Configuration-Related Setup mentions state machine" To fix this : - Add new function callbacks for polling on PLL lock and O_CMN_READY assertion. - As state machine and clocks get enabled in power_on callback only, move the clock related programming part from configure callback to power_on callback and poll for the PLL lockup and O_CMN_READY assertion after state machine gets enabled. - The configure callback only saves the PLL configuration received from the client driver which will be applied later on in power_on callback. - Add checks to ensure configure is called before power_on and state machine is in disabled state before power_on callback is called. - Disable state machine in power_off so that client driver can re-configure the PLL by following up a power_off, configure, power_on sequence. [1]: https://www.ti.com/lit/zip/spruil1 Cc: stable(a)vger.kernel.org Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht(a)ti.com> Tested-by: Harikrishna Shenoy <h-shenoy(a)ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-2-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c index 33a42e72362e..da8de0a9d086 100644 --- a/drivers/phy/cadence/cdns-dphy.c +++ b/drivers/phy/cadence/cdns-dphy.c @@ -92,6 +92,8 @@ struct cdns_dphy_ops { void (*set_pll_cfg)(struct cdns_dphy *dphy, const struct cdns_dphy_cfg *cfg); unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy); + int (*wait_for_pll_lock)(struct cdns_dphy *dphy); + int (*wait_for_cmn_ready)(struct cdns_dphy *dphy); }; struct cdns_dphy { @@ -101,6 +103,8 @@ struct cdns_dphy { struct clk *pll_ref_clk; const struct cdns_dphy_ops *ops; struct phy *phy; + bool is_configured; + bool is_powered; }; /* Order of bands is important since the index is the band number. */ @@ -186,6 +190,16 @@ static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy) return dphy->ops->get_wakeup_time_ns(dphy); } +static int cdns_dphy_wait_for_pll_lock(struct cdns_dphy *dphy) +{ + return dphy->ops->wait_for_pll_lock ? dphy->ops->wait_for_pll_lock(dphy) : 0; +} + +static int cdns_dphy_wait_for_cmn_ready(struct cdns_dphy *dphy) +{ + return dphy->ops->wait_for_cmn_ready ? dphy->ops->wait_for_cmn_ready(dphy) : 0; +} + static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy) { /* Default wakeup time is 800 ns (in a simulated environment). */ @@ -227,7 +241,6 @@ static unsigned long cdns_dphy_j721e_get_wakeup_time_ns(struct cdns_dphy *dphy) static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy, const struct cdns_dphy_cfg *cfg) { - u32 status; /* * set the PWM and PLL Byteclk divider settings to recommended values @@ -244,13 +257,6 @@ static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy, writel(DPHY_TX_J721E_WIZ_LANE_RSTB, dphy->regs + DPHY_TX_J721E_WIZ_RST_CTRL); - - readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status, - (status & DPHY_TX_WIZ_PLL_LOCK), 0, POLL_TIMEOUT_US); - - readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status, - (status & DPHY_TX_WIZ_O_CMN_READY), 0, - POLL_TIMEOUT_US); } static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div) @@ -258,6 +264,23 @@ static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div) writel(div, dphy->regs + DPHY_TX_J721E_WIZ_PSM_FREQ); } +static int cdns_dphy_j721e_wait_for_pll_lock(struct cdns_dphy *dphy) +{ + u32 status; + + return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status, + status & DPHY_TX_WIZ_PLL_LOCK, 0, POLL_TIMEOUT_US); +} + +static int cdns_dphy_j721e_wait_for_cmn_ready(struct cdns_dphy *dphy) +{ + u32 status; + + return readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status, + status & DPHY_TX_WIZ_O_CMN_READY, 0, + POLL_TIMEOUT_US); +} + /* * This is the reference implementation of DPHY hooks. Specific integration of * this IP may have to re-implement some of them depending on how they decided @@ -273,6 +296,8 @@ static const struct cdns_dphy_ops j721e_dphy_ops = { .get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns, .set_pll_cfg = cdns_dphy_j721e_set_pll_cfg, .set_psm_div = cdns_dphy_j721e_set_psm_div, + .wait_for_pll_lock = cdns_dphy_j721e_wait_for_pll_lock, + .wait_for_cmn_ready = cdns_dphy_j721e_wait_for_cmn_ready, }; static int cdns_dphy_config_from_opts(struct phy *phy, @@ -328,21 +353,36 @@ static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode, static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts) { struct cdns_dphy *dphy = phy_get_drvdata(phy); - struct cdns_dphy_cfg cfg = { 0 }; - int ret, band_ctrl; - unsigned int reg; + int ret; - ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg); - if (ret) - return ret; + ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &dphy->cfg); + if (!ret) + dphy->is_configured = true; + + return ret; +} + +static int cdns_dphy_power_on(struct phy *phy) +{ + struct cdns_dphy *dphy = phy_get_drvdata(phy); + int ret; + u32 reg; + + if (!dphy->is_configured || dphy->is_powered) + return -EINVAL; + + clk_prepare_enable(dphy->psm_clk); + clk_prepare_enable(dphy->pll_ref_clk); /* * Configure the internal PSM clk divider so that the DPHY has a * 1MHz clk (or something close). */ ret = cdns_dphy_setup_psm(dphy); - if (ret) - return ret; + if (ret) { + dev_err(&dphy->phy->dev, "Failed to setup PSM with error %d\n", ret); + goto err_power_on; + } /* * Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes @@ -357,40 +397,60 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts) * Configure the DPHY PLL that will be used to generate the TX byte * clk. */ - cdns_dphy_set_pll_cfg(dphy, &cfg); + cdns_dphy_set_pll_cfg(dphy, &dphy->cfg); - band_ctrl = cdns_dphy_tx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate); - if (band_ctrl < 0) - return band_ctrl; + ret = cdns_dphy_tx_get_band_ctrl(dphy->cfg.hs_clk_rate); + if (ret < 0) { + dev_err(&dphy->phy->dev, "Failed to get band control value with error %d\n", ret); + goto err_power_on; + } - reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) | - FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl); + reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, ret) | + FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, ret); writel(reg, dphy->regs + DPHY_BAND_CFG); - return 0; -} - -static int cdns_dphy_power_on(struct phy *phy) -{ - struct cdns_dphy *dphy = phy_get_drvdata(phy); - - clk_prepare_enable(dphy->psm_clk); - clk_prepare_enable(dphy->pll_ref_clk); - /* Start TX state machine. */ writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN, dphy->regs + DPHY_CMN_SSM); + ret = cdns_dphy_wait_for_pll_lock(dphy); + if (ret) { + dev_err(&dphy->phy->dev, "Failed to lock PLL with error %d\n", ret); + goto err_power_on; + } + + ret = cdns_dphy_wait_for_cmn_ready(dphy); + if (ret) { + dev_err(&dphy->phy->dev, "O_CMN_READY signal failed to assert with error %d\n", + ret); + goto err_power_on; + } + + dphy->is_powered = true; + return 0; + +err_power_on: + clk_disable_unprepare(dphy->pll_ref_clk); + clk_disable_unprepare(dphy->psm_clk); + + return ret; } static int cdns_dphy_power_off(struct phy *phy) { struct cdns_dphy *dphy = phy_get_drvdata(phy); + u32 reg; clk_disable_unprepare(dphy->pll_ref_clk); clk_disable_unprepare(dphy->psm_clk); + /* Stop TX state machine. */ + reg = readl(dphy->regs + DPHY_CMN_SSM); + writel(reg & ~DPHY_CMN_SSM_EN, dphy->regs + DPHY_CMN_SSM); + + dphy->is_powered = false; + return 0; }

2 weeks, 3 days

2
2
0 0

FAILED: patch "[PATCH] NFSD: Fix last write offset handling in layoutcommit" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x d68886bae76a4b9b3484d23e5b7df086f940fa38 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101600-daintily-walk-9f1a@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d68886bae76a4b9b3484d23e5b7df086f940fa38 Mon Sep 17 00:00:00 2001 From: Sergey Bashirov <sergeybashirov(a)gmail.com> Date: Mon, 21 Jul 2025 21:40:56 +0300 Subject: [PATCH] NFSD: Fix last write offset handling in layoutcommit The data type of loca_last_write_offset is newoffset4 and is switched on a boolean value, no_newoffset, that indicates if a previous write occurred or not. If no_newoffset is FALSE, an offset is not given. This means that client does not try to update the file size. Thus, server should not try to calculate new file size and check if it fits into the segment range. See RFC 8881, section 12.5.4.2. Sometimes the current incorrect logic may cause clients to hang when trying to sync an inode. If layoutcommit fails, the client marks the inode as dirty again. Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations") Cc: stable(a)vger.kernel.org Co-developed-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov(a)gmail.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Jeff Layton <jlayton(a)kernel.org> Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> diff --git a/fs/nfsd/blocklayout.c b/fs/nfsd/blocklayout.c index 4c936132eb44..0822d8a119c6 100644 --- a/fs/nfsd/blocklayout.c +++ b/fs/nfsd/blocklayout.c @@ -118,7 +118,6 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, struct iomap *iomaps, int nr_iomaps) { struct timespec64 mtime = inode_get_mtime(inode); - loff_t new_size = lcp->lc_last_wr + 1; struct iattr iattr = { .ia_valid = 0 }; int error; @@ -128,9 +127,9 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, iattr.ia_valid |= ATTR_ATIME | ATTR_CTIME | ATTR_MTIME; iattr.ia_atime = iattr.ia_ctime = iattr.ia_mtime = lcp->lc_mtime; - if (new_size > i_size_read(inode)) { + if (lcp->lc_size_chg) { iattr.ia_valid |= ATTR_SIZE; - iattr.ia_size = new_size; + iattr.ia_size = lcp->lc_newsize; } error = inode->i_sb->s_export_op->commit_blocks(inode, iomaps, diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 656b2e7d8840..7043fc475458 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -2475,7 +2475,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, const struct nfsd4_layout_seg *seg = &lcp->lc_seg; struct svc_fh *current_fh = &cstate->current_fh; const struct nfsd4_layout_ops *ops; - loff_t new_size = lcp->lc_last_wr + 1; struct inode *inode; struct nfs4_layout_stateid *ls; __be32 nfserr; @@ -2491,13 +2490,21 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, goto out; inode = d_inode(current_fh->fh_dentry); - nfserr = nfserr_inval; - if (new_size <= seg->offset) - goto out; - if (new_size > seg->offset + seg->length) - goto out; - if (!lcp->lc_newoffset && new_size > i_size_read(inode)) - goto out; + lcp->lc_size_chg = false; + if (lcp->lc_newoffset) { + loff_t new_size = lcp->lc_last_wr + 1; + + nfserr = nfserr_inval; + if (new_size <= seg->offset) + goto out; + if (new_size > seg->offset + seg->length) + goto out; + + if (new_size > i_size_read(inode)) { + lcp->lc_size_chg = true; + lcp->lc_newsize = new_size; + } + } nfserr = nfsd4_preprocess_layout_stateid(rqstp, cstate, &lcp->lc_sid, false, lcp->lc_layout_type, @@ -2513,13 +2520,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, /* LAYOUTCOMMIT does not require any serialization */ mutex_unlock(&ls->ls_mutex); - if (new_size > i_size_read(inode)) { - lcp->lc_size_chg = true; - lcp->lc_newsize = new_size; - } else { - lcp->lc_size_chg = false; - } - nfserr = ops->proc_layoutcommit(inode, rqstp, lcp); nfs4_put_stid(&ls->ls_stid); out:

2 weeks, 3 days

2
2
0 0

FAILED: patch "[PATCH] NFSD: Fix last write offset handling in layoutcommit" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x d68886bae76a4b9b3484d23e5b7df086f940fa38 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101659-wing-paltry-7e9d@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d68886bae76a4b9b3484d23e5b7df086f940fa38 Mon Sep 17 00:00:00 2001 From: Sergey Bashirov <sergeybashirov(a)gmail.com> Date: Mon, 21 Jul 2025 21:40:56 +0300 Subject: [PATCH] NFSD: Fix last write offset handling in layoutcommit The data type of loca_last_write_offset is newoffset4 and is switched on a boolean value, no_newoffset, that indicates if a previous write occurred or not. If no_newoffset is FALSE, an offset is not given. This means that client does not try to update the file size. Thus, server should not try to calculate new file size and check if it fits into the segment range. See RFC 8881, section 12.5.4.2. Sometimes the current incorrect logic may cause clients to hang when trying to sync an inode. If layoutcommit fails, the client marks the inode as dirty again. Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations") Cc: stable(a)vger.kernel.org Co-developed-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov(a)gmail.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Jeff Layton <jlayton(a)kernel.org> Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> diff --git a/fs/nfsd/blocklayout.c b/fs/nfsd/blocklayout.c index 4c936132eb44..0822d8a119c6 100644 --- a/fs/nfsd/blocklayout.c +++ b/fs/nfsd/blocklayout.c @@ -118,7 +118,6 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, struct iomap *iomaps, int nr_iomaps) { struct timespec64 mtime = inode_get_mtime(inode); - loff_t new_size = lcp->lc_last_wr + 1; struct iattr iattr = { .ia_valid = 0 }; int error; @@ -128,9 +127,9 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, iattr.ia_valid |= ATTR_ATIME | ATTR_CTIME | ATTR_MTIME; iattr.ia_atime = iattr.ia_ctime = iattr.ia_mtime = lcp->lc_mtime; - if (new_size > i_size_read(inode)) { + if (lcp->lc_size_chg) { iattr.ia_valid |= ATTR_SIZE; - iattr.ia_size = new_size; + iattr.ia_size = lcp->lc_newsize; } error = inode->i_sb->s_export_op->commit_blocks(inode, iomaps, diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 656b2e7d8840..7043fc475458 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -2475,7 +2475,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, const struct nfsd4_layout_seg *seg = &lcp->lc_seg; struct svc_fh *current_fh = &cstate->current_fh; const struct nfsd4_layout_ops *ops; - loff_t new_size = lcp->lc_last_wr + 1; struct inode *inode; struct nfs4_layout_stateid *ls; __be32 nfserr; @@ -2491,13 +2490,21 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, goto out; inode = d_inode(current_fh->fh_dentry); - nfserr = nfserr_inval; - if (new_size <= seg->offset) - goto out; - if (new_size > seg->offset + seg->length) - goto out; - if (!lcp->lc_newoffset && new_size > i_size_read(inode)) - goto out; + lcp->lc_size_chg = false; + if (lcp->lc_newoffset) { + loff_t new_size = lcp->lc_last_wr + 1; + + nfserr = nfserr_inval; + if (new_size <= seg->offset) + goto out; + if (new_size > seg->offset + seg->length) + goto out; + + if (new_size > i_size_read(inode)) { + lcp->lc_size_chg = true; + lcp->lc_newsize = new_size; + } + } nfserr = nfsd4_preprocess_layout_stateid(rqstp, cstate, &lcp->lc_sid, false, lcp->lc_layout_type, @@ -2513,13 +2520,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, /* LAYOUTCOMMIT does not require any serialization */ mutex_unlock(&ls->ls_mutex); - if (new_size > i_size_read(inode)) { - lcp->lc_size_chg = true; - lcp->lc_newsize = new_size; - } else { - lcp->lc_size_chg = false; - } - nfserr = ops->proc_layoutcommit(inode, rqstp, lcp); nfs4_put_stid(&ls->ls_stid); out:

2 weeks, 3 days

2
3
0 0

FAILED: patch "[PATCH] NFSD: Fix last write offset handling in layoutcommit" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x d68886bae76a4b9b3484d23e5b7df086f940fa38 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101659-tightly-grandma-7323@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d68886bae76a4b9b3484d23e5b7df086f940fa38 Mon Sep 17 00:00:00 2001 From: Sergey Bashirov <sergeybashirov(a)gmail.com> Date: Mon, 21 Jul 2025 21:40:56 +0300 Subject: [PATCH] NFSD: Fix last write offset handling in layoutcommit The data type of loca_last_write_offset is newoffset4 and is switched on a boolean value, no_newoffset, that indicates if a previous write occurred or not. If no_newoffset is FALSE, an offset is not given. This means that client does not try to update the file size. Thus, server should not try to calculate new file size and check if it fits into the segment range. See RFC 8881, section 12.5.4.2. Sometimes the current incorrect logic may cause clients to hang when trying to sync an inode. If layoutcommit fails, the client marks the inode as dirty again. Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations") Cc: stable(a)vger.kernel.org Co-developed-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov(a)gmail.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Jeff Layton <jlayton(a)kernel.org> Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> diff --git a/fs/nfsd/blocklayout.c b/fs/nfsd/blocklayout.c index 4c936132eb44..0822d8a119c6 100644 --- a/fs/nfsd/blocklayout.c +++ b/fs/nfsd/blocklayout.c @@ -118,7 +118,6 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, struct iomap *iomaps, int nr_iomaps) { struct timespec64 mtime = inode_get_mtime(inode); - loff_t new_size = lcp->lc_last_wr + 1; struct iattr iattr = { .ia_valid = 0 }; int error; @@ -128,9 +127,9 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, iattr.ia_valid |= ATTR_ATIME | ATTR_CTIME | ATTR_MTIME; iattr.ia_atime = iattr.ia_ctime = iattr.ia_mtime = lcp->lc_mtime; - if (new_size > i_size_read(inode)) { + if (lcp->lc_size_chg) { iattr.ia_valid |= ATTR_SIZE; - iattr.ia_size = new_size; + iattr.ia_size = lcp->lc_newsize; } error = inode->i_sb->s_export_op->commit_blocks(inode, iomaps, diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 656b2e7d8840..7043fc475458 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -2475,7 +2475,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, const struct nfsd4_layout_seg *seg = &lcp->lc_seg; struct svc_fh *current_fh = &cstate->current_fh; const struct nfsd4_layout_ops *ops; - loff_t new_size = lcp->lc_last_wr + 1; struct inode *inode; struct nfs4_layout_stateid *ls; __be32 nfserr; @@ -2491,13 +2490,21 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, goto out; inode = d_inode(current_fh->fh_dentry); - nfserr = nfserr_inval; - if (new_size <= seg->offset) - goto out; - if (new_size > seg->offset + seg->length) - goto out; - if (!lcp->lc_newoffset && new_size > i_size_read(inode)) - goto out; + lcp->lc_size_chg = false; + if (lcp->lc_newoffset) { + loff_t new_size = lcp->lc_last_wr + 1; + + nfserr = nfserr_inval; + if (new_size <= seg->offset) + goto out; + if (new_size > seg->offset + seg->length) + goto out; + + if (new_size > i_size_read(inode)) { + lcp->lc_size_chg = true; + lcp->lc_newsize = new_size; + } + } nfserr = nfsd4_preprocess_layout_stateid(rqstp, cstate, &lcp->lc_sid, false, lcp->lc_layout_type, @@ -2513,13 +2520,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, /* LAYOUTCOMMIT does not require any serialization */ mutex_unlock(&ls->ls_mutex); - if (new_size > i_size_read(inode)) { - lcp->lc_size_chg = true; - lcp->lc_newsize = new_size; - } else { - lcp->lc_size_chg = false; - } - nfserr = ops->proc_layoutcommit(inode, rqstp, lcp); nfs4_put_stid(&ls->ls_stid); out:

2 weeks, 3 days

2
3
0 0

FAILED: patch "[PATCH] NFSD: Fix last write offset handling in layoutcommit" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x d68886bae76a4b9b3484d23e5b7df086f940fa38 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101658-county-probation-13a9@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d68886bae76a4b9b3484d23e5b7df086f940fa38 Mon Sep 17 00:00:00 2001 From: Sergey Bashirov <sergeybashirov(a)gmail.com> Date: Mon, 21 Jul 2025 21:40:56 +0300 Subject: [PATCH] NFSD: Fix last write offset handling in layoutcommit The data type of loca_last_write_offset is newoffset4 and is switched on a boolean value, no_newoffset, that indicates if a previous write occurred or not. If no_newoffset is FALSE, an offset is not given. This means that client does not try to update the file size. Thus, server should not try to calculate new file size and check if it fits into the segment range. See RFC 8881, section 12.5.4.2. Sometimes the current incorrect logic may cause clients to hang when trying to sync an inode. If layoutcommit fails, the client marks the inode as dirty again. Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations") Cc: stable(a)vger.kernel.org Co-developed-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov(a)gmail.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Jeff Layton <jlayton(a)kernel.org> Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> diff --git a/fs/nfsd/blocklayout.c b/fs/nfsd/blocklayout.c index 4c936132eb44..0822d8a119c6 100644 --- a/fs/nfsd/blocklayout.c +++ b/fs/nfsd/blocklayout.c @@ -118,7 +118,6 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, struct iomap *iomaps, int nr_iomaps) { struct timespec64 mtime = inode_get_mtime(inode); - loff_t new_size = lcp->lc_last_wr + 1; struct iattr iattr = { .ia_valid = 0 }; int error; @@ -128,9 +127,9 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, iattr.ia_valid |= ATTR_ATIME | ATTR_CTIME | ATTR_MTIME; iattr.ia_atime = iattr.ia_ctime = iattr.ia_mtime = lcp->lc_mtime; - if (new_size > i_size_read(inode)) { + if (lcp->lc_size_chg) { iattr.ia_valid |= ATTR_SIZE; - iattr.ia_size = new_size; + iattr.ia_size = lcp->lc_newsize; } error = inode->i_sb->s_export_op->commit_blocks(inode, iomaps, diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 656b2e7d8840..7043fc475458 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -2475,7 +2475,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, const struct nfsd4_layout_seg *seg = &lcp->lc_seg; struct svc_fh *current_fh = &cstate->current_fh; const struct nfsd4_layout_ops *ops; - loff_t new_size = lcp->lc_last_wr + 1; struct inode *inode; struct nfs4_layout_stateid *ls; __be32 nfserr; @@ -2491,13 +2490,21 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, goto out; inode = d_inode(current_fh->fh_dentry); - nfserr = nfserr_inval; - if (new_size <= seg->offset) - goto out; - if (new_size > seg->offset + seg->length) - goto out; - if (!lcp->lc_newoffset && new_size > i_size_read(inode)) - goto out; + lcp->lc_size_chg = false; + if (lcp->lc_newoffset) { + loff_t new_size = lcp->lc_last_wr + 1; + + nfserr = nfserr_inval; + if (new_size <= seg->offset) + goto out; + if (new_size > seg->offset + seg->length) + goto out; + + if (new_size > i_size_read(inode)) { + lcp->lc_size_chg = true; + lcp->lc_newsize = new_size; + } + } nfserr = nfsd4_preprocess_layout_stateid(rqstp, cstate, &lcp->lc_sid, false, lcp->lc_layout_type, @@ -2513,13 +2520,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, /* LAYOUTCOMMIT does not require any serialization */ mutex_unlock(&ls->ls_mutex); - if (new_size > i_size_read(inode)) { - lcp->lc_size_chg = true; - lcp->lc_newsize = new_size; - } else { - lcp->lc_size_chg = false; - } - nfserr = ops->proc_layoutcommit(inode, rqstp, lcp); nfs4_put_stid(&ls->ls_stid); out:

2 weeks, 3 days

2
3
0 0

FAILED: patch "[PATCH] NFSD: Fix last write offset handling in layoutcommit" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x d68886bae76a4b9b3484d23e5b7df086f940fa38 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101657-sandpaper-shelter-26f2@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d68886bae76a4b9b3484d23e5b7df086f940fa38 Mon Sep 17 00:00:00 2001 From: Sergey Bashirov <sergeybashirov(a)gmail.com> Date: Mon, 21 Jul 2025 21:40:56 +0300 Subject: [PATCH] NFSD: Fix last write offset handling in layoutcommit The data type of loca_last_write_offset is newoffset4 and is switched on a boolean value, no_newoffset, that indicates if a previous write occurred or not. If no_newoffset is FALSE, an offset is not given. This means that client does not try to update the file size. Thus, server should not try to calculate new file size and check if it fits into the segment range. See RFC 8881, section 12.5.4.2. Sometimes the current incorrect logic may cause clients to hang when trying to sync an inode. If layoutcommit fails, the client marks the inode as dirty again. Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations") Cc: stable(a)vger.kernel.org Co-developed-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Konstantin Evtushenko <koevtushenko(a)yandex.com> Signed-off-by: Sergey Bashirov <sergeybashirov(a)gmail.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Jeff Layton <jlayton(a)kernel.org> Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> diff --git a/fs/nfsd/blocklayout.c b/fs/nfsd/blocklayout.c index 4c936132eb44..0822d8a119c6 100644 --- a/fs/nfsd/blocklayout.c +++ b/fs/nfsd/blocklayout.c @@ -118,7 +118,6 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, struct iomap *iomaps, int nr_iomaps) { struct timespec64 mtime = inode_get_mtime(inode); - loff_t new_size = lcp->lc_last_wr + 1; struct iattr iattr = { .ia_valid = 0 }; int error; @@ -128,9 +127,9 @@ nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, iattr.ia_valid |= ATTR_ATIME | ATTR_CTIME | ATTR_MTIME; iattr.ia_atime = iattr.ia_ctime = iattr.ia_mtime = lcp->lc_mtime; - if (new_size > i_size_read(inode)) { + if (lcp->lc_size_chg) { iattr.ia_valid |= ATTR_SIZE; - iattr.ia_size = new_size; + iattr.ia_size = lcp->lc_newsize; } error = inode->i_sb->s_export_op->commit_blocks(inode, iomaps, diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 656b2e7d8840..7043fc475458 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -2475,7 +2475,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, const struct nfsd4_layout_seg *seg = &lcp->lc_seg; struct svc_fh *current_fh = &cstate->current_fh; const struct nfsd4_layout_ops *ops; - loff_t new_size = lcp->lc_last_wr + 1; struct inode *inode; struct nfs4_layout_stateid *ls; __be32 nfserr; @@ -2491,13 +2490,21 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, goto out; inode = d_inode(current_fh->fh_dentry); - nfserr = nfserr_inval; - if (new_size <= seg->offset) - goto out; - if (new_size > seg->offset + seg->length) - goto out; - if (!lcp->lc_newoffset && new_size > i_size_read(inode)) - goto out; + lcp->lc_size_chg = false; + if (lcp->lc_newoffset) { + loff_t new_size = lcp->lc_last_wr + 1; + + nfserr = nfserr_inval; + if (new_size <= seg->offset) + goto out; + if (new_size > seg->offset + seg->length) + goto out; + + if (new_size > i_size_read(inode)) { + lcp->lc_size_chg = true; + lcp->lc_newsize = new_size; + } + } nfserr = nfsd4_preprocess_layout_stateid(rqstp, cstate, &lcp->lc_sid, false, lcp->lc_layout_type, @@ -2513,13 +2520,6 @@ nfsd4_layoutcommit(struct svc_rqst *rqstp, /* LAYOUTCOMMIT does not require any serialization */ mutex_unlock(&ls->ls_mutex); - if (new_size > i_size_read(inode)) { - lcp->lc_size_chg = true; - lcp->lc_newsize = new_size; - } else { - lcp->lc_size_chg = false; - } - nfserr = ops->proc_layoutcommit(inode, rqstp, lcp); nfs4_put_stid(&ls->ls_stid); out:

2 weeks, 3 days

2
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2025