October 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] PCI: tegra194: Reset BARs when running in PCIe endpoint mode" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 42f9c66a6d0cc45758dab77233c5460e1cf003df # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101638-slider-outlying-148b@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 42f9c66a6d0cc45758dab77233c5460e1cf003df Mon Sep 17 00:00:00 2001 From: Niklas Cassel <cassel(a)kernel.org> Date: Mon, 22 Sep 2025 16:08:25 +0200 Subject: [PATCH] PCI: tegra194: Reset BARs when running in PCIe endpoint mode Tegra already defines all BARs except BAR0 as BAR_RESERVED. This is sufficient for pci-epf-test to not allocate backing memory and to not call set_bar() for those BARs. However, marking a BAR as BAR_RESERVED does not mean that the BAR gets disabled. The host side driver, pci_endpoint_test, simply does an ioremap for all enabled BARs and will run tests against all enabled BARs, so it will run tests against the BARs marked as BAR_RESERVED. After running the BAR tests (which will write to all enabled BARs), the inbound address translation is broken. This is because the tegra controller exposes the ATU Port Logic Structure in BAR4, so when BAR4 is written, the inbound address translation settings get overwritten. To avoid this, implement the dw_pcie_ep_ops .init() callback and start off by disabling all BARs (pci-epf-test will later enable/configure BARs that are not defined as BAR_RESERVED). This matches the behavior of other PCIe endpoint drivers: dra7xx, imx6, layerscape-ep, artpec6, dw-rockchip, qcom-ep, rcar-gen4, and uniphier-ep. With this, the PCI endpoint kselftest test case CONSECUTIVE_BAR_TEST (which was specifically made to detect address translation issues) passes. Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Signed-off-by: Niklas Cassel <cassel(a)kernel.org> Signed-off-by: Manivannan Sadhasivam <mani(a)kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Cc: stable(a)vger.kernel.org Link: https://patch.msgid.link/20250922140822.519796-7-cassel@kernel.org diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c index fe418b9bfbb4..359d92dca86a 100644 --- a/drivers/pci/controller/dwc/pcie-tegra194.c +++ b/drivers/pci/controller/dwc/pcie-tegra194.c @@ -1941,6 +1941,15 @@ static irqreturn_t tegra_pcie_ep_pex_rst_irq(int irq, void *arg) return IRQ_HANDLED; } +static void tegra_pcie_ep_init(struct dw_pcie_ep *ep) +{ + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); + enum pci_barno bar; + + for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) + dw_pcie_ep_reset_bar(pci, bar); +}; + static int tegra_pcie_ep_raise_intx_irq(struct tegra_pcie_dw *pcie, u16 irq) { /* Tegra194 supports only INTA */ @@ -2016,6 +2025,7 @@ tegra_pcie_ep_get_features(struct dw_pcie_ep *ep) } static const struct dw_pcie_ep_ops pcie_ep_ops = { + .init = tegra_pcie_ep_init, .raise_irq = tegra_pcie_ep_raise_irq, .get_features = tegra_pcie_ep_get_features, };

2 weeks, 3 days

2
1
0 0

FAILED: patch "[PATCH] PCI: j721e: Fix programming sequence of "strap" settings" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x f842d3313ba179d4005096357289c7ad09cec575 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101614-regulator-gumball-c7c6@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f842d3313ba179d4005096357289c7ad09cec575 Mon Sep 17 00:00:00 2001 From: Siddharth Vadapalli <s-vadapalli(a)ti.com> Date: Mon, 8 Sep 2025 17:38:27 +0530 Subject: [PATCH] PCI: j721e: Fix programming sequence of "strap" settings The Cadence PCIe Controller integrated in the TI K3 SoCs supports both Root-Complex and Endpoint modes of operation. The Glue Layer allows "strapping" the Mode of operation of the Controller, the Link Speed and the Link Width. This is enabled by programming the "PCIEn_CTRL" register (n corresponds to the PCIe instance) within the CTRL_MMR memory-mapped register space. The "reset-values" of the registers are also different depending on the mode of operation. Since the PCIe Controller latches onto the "reset-values" immediately after being powered on, if the Glue Layer configuration is not done while the PCIe Controller is off, it will result in the PCIe Controller latching onto the wrong "reset-values". In practice, this will show up as a wrong representation of the PCIe Controller's capability structures in the PCIe Configuration Space. Some such capabilities which are supported by the PCIe Controller in the Root-Complex mode but are incorrectly latched onto as being unsupported are: - Link Bandwidth Notification - Alternate Routing ID (ARI) Forwarding Support - Next capability offset within Advanced Error Reporting (AER) capability Fix this by powering off the PCIe Controller before programming the "strap" settings and powering it on after that. The runtime PM APIs namely pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and increment the usage counter respectively, causing GENPD to power off and power on the PCIe Controller. Fixes: f3e25911a430 ("PCI: j721e: Add TI J721E PCIe driver") Signed-off-by: Siddharth Vadapalli <s-vadapalli(a)ti.com> Signed-off-by: Manivannan Sadhasivam <mani(a)kernel.org> Cc: stable(a)vger.kernel.org Link: https://patch.msgid.link/20250908120828.1471776-1-s-vadapalli@ti.com diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c index cfca13a4c840..5a9ae33e2b93 100644 --- a/drivers/pci/controller/cadence/pci-j721e.c +++ b/drivers/pci/controller/cadence/pci-j721e.c @@ -284,6 +284,25 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie) if (!ret) offset = args.args[0]; + /* + * The PCIe Controller's registers have different "reset-values" + * depending on the "strap" settings programmed into the PCIEn_CTRL + * register within the CTRL_MMR memory-mapped register space. + * The registers latch onto a "reset-value" based on the "strap" + * settings sampled after the PCIe Controller is powered on. + * To ensure that the "reset-values" are sampled accurately, power + * off the PCIe Controller before programming the "strap" settings + * and power it on after that. The runtime PM APIs namely + * pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and + * increment the usage counter respectively, causing GENPD to power off + * and power on the PCIe Controller. + */ + ret = pm_runtime_put_sync(dev); + if (ret < 0) { + dev_err(dev, "Failed to power off PCIe Controller\n"); + return ret; + } + ret = j721e_pcie_set_mode(pcie, syscon, offset); if (ret < 0) { dev_err(dev, "Failed to set pci mode\n"); @@ -302,6 +321,12 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie) return ret; } + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "Failed to power on PCIe Controller\n"); + return ret; + } + /* Enable ACSPCIE refclk output if the optional property exists */ syscon = syscon_regmap_lookup_by_phandle_optional(node, "ti,syscon-acspcie-proxy-ctrl");

2 weeks, 3 days

2
2
0 0

FAILED: patch "[PATCH] PCI: tegra194: Reset BARs when running in PCIe endpoint mode" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 42f9c66a6d0cc45758dab77233c5460e1cf003df # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101638-carry-unwashed-bba6@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 42f9c66a6d0cc45758dab77233c5460e1cf003df Mon Sep 17 00:00:00 2001 From: Niklas Cassel <cassel(a)kernel.org> Date: Mon, 22 Sep 2025 16:08:25 +0200 Subject: [PATCH] PCI: tegra194: Reset BARs when running in PCIe endpoint mode Tegra already defines all BARs except BAR0 as BAR_RESERVED. This is sufficient for pci-epf-test to not allocate backing memory and to not call set_bar() for those BARs. However, marking a BAR as BAR_RESERVED does not mean that the BAR gets disabled. The host side driver, pci_endpoint_test, simply does an ioremap for all enabled BARs and will run tests against all enabled BARs, so it will run tests against the BARs marked as BAR_RESERVED. After running the BAR tests (which will write to all enabled BARs), the inbound address translation is broken. This is because the tegra controller exposes the ATU Port Logic Structure in BAR4, so when BAR4 is written, the inbound address translation settings get overwritten. To avoid this, implement the dw_pcie_ep_ops .init() callback and start off by disabling all BARs (pci-epf-test will later enable/configure BARs that are not defined as BAR_RESERVED). This matches the behavior of other PCIe endpoint drivers: dra7xx, imx6, layerscape-ep, artpec6, dw-rockchip, qcom-ep, rcar-gen4, and uniphier-ep. With this, the PCI endpoint kselftest test case CONSECUTIVE_BAR_TEST (which was specifically made to detect address translation issues) passes. Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Signed-off-by: Niklas Cassel <cassel(a)kernel.org> Signed-off-by: Manivannan Sadhasivam <mani(a)kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Cc: stable(a)vger.kernel.org Link: https://patch.msgid.link/20250922140822.519796-7-cassel@kernel.org diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c index fe418b9bfbb4..359d92dca86a 100644 --- a/drivers/pci/controller/dwc/pcie-tegra194.c +++ b/drivers/pci/controller/dwc/pcie-tegra194.c @@ -1941,6 +1941,15 @@ static irqreturn_t tegra_pcie_ep_pex_rst_irq(int irq, void *arg) return IRQ_HANDLED; } +static void tegra_pcie_ep_init(struct dw_pcie_ep *ep) +{ + struct dw_pcie *pci = to_dw_pcie_from_ep(ep); + enum pci_barno bar; + + for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) + dw_pcie_ep_reset_bar(pci, bar); +}; + static int tegra_pcie_ep_raise_intx_irq(struct tegra_pcie_dw *pcie, u16 irq) { /* Tegra194 supports only INTA */ @@ -2016,6 +2025,7 @@ tegra_pcie_ep_get_features(struct dw_pcie_ep *ep) } static const struct dw_pcie_ep_ops pcie_ep_ops = { + .init = tegra_pcie_ep_init, .raise_irq = tegra_pcie_ep_raise_irq, .get_features = tegra_pcie_ep_get_features, };

2 weeks, 3 days

2
1
0 0

FAILED: patch "[PATCH] spi: cadence-quadspi: Flush posted register writes before" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 29e0b471ccbd674d20d4bbddea1a51e7105212c5 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101621-blah-dyslexic-116b@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 29e0b471ccbd674d20d4bbddea1a51e7105212c5 Mon Sep 17 00:00:00 2001 From: Pratyush Yadav <pratyush(a)kernel.org> Date: Sat, 6 Sep 2025 00:29:55 +0530 Subject: [PATCH] spi: cadence-quadspi: Flush posted register writes before INDAC access cqspi_indirect_read_execute() and cqspi_indirect_write_execute() first set the enable bit on APB region and then start reading/writing to the AHB region. On TI K3 SoCs these regions lie on different endpoints. This means that the order of the two operations is not guaranteed, and they might be reordered at the interconnect level. It is possible for the AHB write to be executed before the APB write to enable the indirect controller, causing the transaction to be invalid and the write erroring out. Read back the APB region write before accessing the AHB region to make sure the write got flushed and the race condition is eliminated. Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller") CC: stable(a)vger.kernel.org Reviewed-by: Pratyush Yadav <pratyush(a)kernel.org> Signed-off-by: Pratyush Yadav <pratyush(a)kernel.org> Signed-off-by: Santhosh Kumar K <s-k6(a)ti.com> Message-ID: <20250905185958.3575037-2-s-k6(a)ti.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 9bf823348cd3..eaf9a0f522d5 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -764,6 +764,7 @@ static int cqspi_indirect_read_execute(struct cqspi_flash_pdata *f_pdata, reinit_completion(&cqspi->transfer_complete); writel(CQSPI_REG_INDIRECTRD_START_MASK, reg_base + CQSPI_REG_INDIRECTRD); + readl(reg_base + CQSPI_REG_INDIRECTRD); /* Flush posted write. */ while (remaining > 0) { if (use_irq && @@ -1090,6 +1091,8 @@ static int cqspi_indirect_write_execute(struct cqspi_flash_pdata *f_pdata, reinit_completion(&cqspi->transfer_complete); writel(CQSPI_REG_INDIRECTWR_START_MASK, reg_base + CQSPI_REG_INDIRECTWR); + readl(reg_base + CQSPI_REG_INDIRECTWR); /* Flush posted write. */ + /* * As per 66AK2G02 TRM SPRUHY8F section 11.15.5.3 Indirect Access * Controller programming sequence, couple of cycles of

2 weeks, 3 days

2
1
0 0

FAILED: patch "[PATCH] spi: cadence-quadspi: Flush posted register writes before DAC" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 1ad55767e77a853c98752ed1e33b68049a243bd7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101635-laurel-crawling-2104@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1ad55767e77a853c98752ed1e33b68049a243bd7 Mon Sep 17 00:00:00 2001 From: Pratyush Yadav <pratyush(a)kernel.org> Date: Sat, 6 Sep 2025 00:29:56 +0530 Subject: [PATCH] spi: cadence-quadspi: Flush posted register writes before DAC access cqspi_read_setup() and cqspi_write_setup() program the address width as the last step in the setup. This is likely to be immediately followed by a DAC region read/write. On TI K3 SoCs the DAC region is on a different endpoint from the register region. This means that the order of the two operations is not guaranteed, and they might be reordered at the interconnect level. It is possible that the DAC read/write goes through before the address width update goes through. In this situation if the previous command used a different address width the OSPI command is sent with the wrong number of address bytes, resulting in an invalid command and undefined behavior. Read back the size register to make sure the write gets flushed before accessing the DAC region. Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller") CC: stable(a)vger.kernel.org Reviewed-by: Pratyush Yadav <pratyush(a)kernel.org> Signed-off-by: Pratyush Yadav <pratyush(a)kernel.org> Signed-off-by: Santhosh Kumar K <s-k6(a)ti.com> Message-ID: <20250905185958.3575037-3-s-k6(a)ti.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index eaf9a0f522d5..447a32a08a93 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -719,6 +719,7 @@ static int cqspi_read_setup(struct cqspi_flash_pdata *f_pdata, reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; reg |= (op->addr.nbytes - 1); writel(reg, reg_base + CQSPI_REG_SIZE); + readl(reg_base + CQSPI_REG_SIZE); /* Flush posted write. */ return 0; } @@ -1063,6 +1064,7 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata, reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; reg |= (op->addr.nbytes - 1); writel(reg, reg_base + CQSPI_REG_SIZE); + readl(reg_base + CQSPI_REG_SIZE); /* Flush posted write. */ return 0; }

2 weeks, 3 days

2
1
0 0

[PATCH 2/2] io_uring/sqpoll: be smarter on when to update the stime usage

by Jens Axboe

The current approach is a bit naive, and hence calls the time querying way too often. Only start the "doing work" timer when there's actual work to do, and then use that information to terminate (and account) the work time once done. This greatly reduces the frequency of these calls, when they cannot have changed anyway. Running a basic random reader that is setup to use SQPOLL, a profile before this change shows these as the top cycle consumers: + 32.60% iou-sqp-1074 [kernel.kallsyms] [k] thread_group_cputime_adjusted + 19.97% iou-sqp-1074 [kernel.kallsyms] [k] thread_group_cputime + 12.20% io_uring io_uring [.] submitter_uring_fn + 4.13% iou-sqp-1074 [kernel.kallsyms] [k] getrusage + 2.45% iou-sqp-1074 [kernel.kallsyms] [k] io_submit_sqes + 2.18% iou-sqp-1074 [kernel.kallsyms] [k] __pi_memset_generic + 2.09% iou-sqp-1074 [kernel.kallsyms] [k] cputime_adjust and after this change, top of profile looks as follows: + 36.23% io_uring io_uring [.] submitter_uring_fn + 23.26% iou-sqp-819 [kernel.kallsyms] [k] io_sq_thread + 10.14% iou-sqp-819 [kernel.kallsyms] [k] io_sq_tw + 6.52% iou-sqp-819 [kernel.kallsyms] [k] tctx_task_work_run + 4.82% iou-sqp-819 [kernel.kallsyms] [k] nvme_submit_cmds.part.0 + 2.91% iou-sqp-819 [kernel.kallsyms] [k] io_submit_sqes [...] 0.02% iou-sqp-819 [kernel.kallsyms] [k] cputime_adjust where it's spending the cycles on things that actually matter. Reported-by: Fengnan Chang <changfengnan(a)bytedance.com> Cc: stable(a)vger.kernel.org Fixes: 3fcb9d17206e ("io_uring/sqpoll: statistics of the true utilization of sq threads") Signed-off-by: Jens Axboe <axboe(a)kernel.dk> --- io_uring/sqpoll.c | 43 ++++++++++++++++++++++++++++++++----------- 1 file changed, 32 insertions(+), 11 deletions(-) diff --git a/io_uring/sqpoll.c b/io_uring/sqpoll.c index 8705b0aa82e0..f6916f46c047 100644 --- a/io_uring/sqpoll.c +++ b/io_uring/sqpoll.c @@ -170,6 +170,11 @@ static inline bool io_sqd_events_pending(struct io_sq_data *sqd) return READ_ONCE(sqd->state); } +struct io_sq_time { + bool started; + struct timespec64 ts; +}; + struct timespec64 io_sq_cpu_time(struct task_struct *tsk) { u64 utime, stime; @@ -178,15 +183,27 @@ struct timespec64 io_sq_cpu_time(struct task_struct *tsk) return ns_to_timespec64(stime); } -static void io_sq_update_worktime(struct io_sq_data *sqd, struct timespec64 start) +static void io_sq_update_worktime(struct io_sq_data *sqd, struct io_sq_time *ist) { struct timespec64 ts; - ts = timespec64_sub(io_sq_cpu_time(current), start); + if (!ist->started) + return; + ist->started = false; + ts = timespec64_sub(io_sq_cpu_time(current), ist->ts); sqd->work_time += ts.tv_sec * 1000000 + ts.tv_nsec / 1000; } -static int __io_sq_thread(struct io_ring_ctx *ctx, bool cap_entries) +static void io_sq_start_worktime(struct io_sq_time *ist) +{ + if (ist->started) + return; + ist->started = true; + ist->ts = io_sq_cpu_time(current); +} + +static int __io_sq_thread(struct io_ring_ctx *ctx, struct io_sq_data *sqd, + bool cap_entries, struct io_sq_time *ist) { unsigned int to_submit; int ret = 0; @@ -199,6 +216,8 @@ static int __io_sq_thread(struct io_ring_ctx *ctx, bool cap_entries) if (to_submit || !wq_list_empty(&ctx->iopoll_list)) { const struct cred *creds = NULL; + io_sq_start_worktime(ist); + if (ctx->sq_creds != current_cred()) creds = override_creds(ctx->sq_creds); @@ -277,7 +296,6 @@ static int io_sq_thread(void *data) struct llist_node *retry_list = NULL; struct io_sq_data *sqd = data; struct io_ring_ctx *ctx; - struct timespec64 start; unsigned long timeout = 0; char buf[TASK_COMM_LEN] = {}; DEFINE_WAIT(wait); @@ -315,6 +333,7 @@ static int io_sq_thread(void *data) mutex_lock(&sqd->lock); while (1) { bool cap_entries, sqt_spin = false; + struct io_sq_time ist = { }; if (io_sqd_events_pending(sqd) || signal_pending(current)) { if (io_sqd_handle_event(sqd)) @@ -323,9 +342,8 @@ static int io_sq_thread(void *data) } cap_entries = !list_is_singular(&sqd->ctx_list); - start = io_sq_cpu_time(current); list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) { - int ret = __io_sq_thread(ctx, cap_entries); + int ret = __io_sq_thread(ctx, sqd, cap_entries, &ist); if (!sqt_spin && (ret > 0 || !wq_list_empty(&ctx->iopoll_list))) sqt_spin = true; @@ -333,15 +351,18 @@ static int io_sq_thread(void *data) if (io_sq_tw(&retry_list, IORING_TW_CAP_ENTRIES_VALUE)) sqt_spin = true; - list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) - if (io_napi(ctx)) + list_for_each_entry(ctx, &sqd->ctx_list, sqd_list) { + if (io_napi(ctx)) { + io_sq_start_worktime(&ist); io_napi_sqpoll_busy_poll(ctx); + } + } + + io_sq_update_worktime(sqd, &ist); if (sqt_spin || !time_after(jiffies, timeout)) { - if (sqt_spin) { - io_sq_update_worktime(sqd, start); + if (sqt_spin) timeout = jiffies + sqd->sq_thread_idle; - } if (unlikely(need_resched())) { mutex_unlock(&sqd->lock); cond_resched(); -- 2.51.0

2 weeks, 3 days

1
0
0 0

FAILED: patch "[PATCH] ext4: avoid potential buffer over-read in" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 8ecb790ea8c3fc69e77bace57f14cf0d7c177bd8 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101635-twitch-preoccupy-ad1d@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8ecb790ea8c3fc69e77bace57f14cf0d7c177bd8 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o <tytso(a)mit.edu> Date: Tue, 16 Sep 2025 23:22:47 -0400 Subject: [PATCH] ext4: avoid potential buffer over-read in parse_apply_sb_mount_options() Unlike other strings in the ext4 superblock, we rely on tune2fs to make sure s_mount_opts is NUL terminated. Harden parse_apply_sb_mount_options() by treating s_mount_opts as a potential __nonstring. Cc: stable(a)vger.kernel.org Fixes: 8b67f04ab9de ("ext4: Add mount options in superblock") Reviewed-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Darrick J. Wong <djwong(a)kernel.org> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Message-ID: <20250916-tune2fs-v2-1-d594dc7486f0(a)mit.edu> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> diff --git a/fs/ext4/super.c b/fs/ext4/super.c index d26e5c0731e5..488f4c281a3f 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2469,7 +2469,7 @@ static int parse_apply_sb_mount_options(struct super_block *sb, struct ext4_fs_context *m_ctx) { struct ext4_sb_info *sbi = EXT4_SB(sb); - char *s_mount_opts = NULL; + char s_mount_opts[65]; struct ext4_fs_context *s_ctx = NULL; struct fs_context *fc = NULL; int ret = -ENOMEM; @@ -2477,15 +2477,11 @@ static int parse_apply_sb_mount_options(struct super_block *sb, if (!sbi->s_es->s_mount_opts[0]) return 0; - s_mount_opts = kstrndup(sbi->s_es->s_mount_opts, - sizeof(sbi->s_es->s_mount_opts), - GFP_KERNEL); - if (!s_mount_opts) - return ret; + strscpy_pad(s_mount_opts, sbi->s_es->s_mount_opts); fc = kzalloc(sizeof(struct fs_context), GFP_KERNEL); if (!fc) - goto out_free; + return -ENOMEM; s_ctx = kzalloc(sizeof(struct ext4_fs_context), GFP_KERNEL); if (!s_ctx) @@ -2517,11 +2513,8 @@ static int parse_apply_sb_mount_options(struct super_block *sb, ret = 0; out_free: - if (fc) { - ext4_fc_free(fc); - kfree(fc); - } - kfree(s_mount_opts); + ext4_fc_free(fc); + kfree(fc); return ret; }

2 weeks, 3 days

2
1
0 0

FAILED: patch "[PATCH] ext4: avoid potential buffer over-read in" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 8ecb790ea8c3fc69e77bace57f14cf0d7c177bd8 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101635-unbuckled-masses-9441@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 8ecb790ea8c3fc69e77bace57f14cf0d7c177bd8 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o <tytso(a)mit.edu> Date: Tue, 16 Sep 2025 23:22:47 -0400 Subject: [PATCH] ext4: avoid potential buffer over-read in parse_apply_sb_mount_options() Unlike other strings in the ext4 superblock, we rely on tune2fs to make sure s_mount_opts is NUL terminated. Harden parse_apply_sb_mount_options() by treating s_mount_opts as a potential __nonstring. Cc: stable(a)vger.kernel.org Fixes: 8b67f04ab9de ("ext4: Add mount options in superblock") Reviewed-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Darrick J. Wong <djwong(a)kernel.org> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Message-ID: <20250916-tune2fs-v2-1-d594dc7486f0(a)mit.edu> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> diff --git a/fs/ext4/super.c b/fs/ext4/super.c index d26e5c0731e5..488f4c281a3f 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2469,7 +2469,7 @@ static int parse_apply_sb_mount_options(struct super_block *sb, struct ext4_fs_context *m_ctx) { struct ext4_sb_info *sbi = EXT4_SB(sb); - char *s_mount_opts = NULL; + char s_mount_opts[65]; struct ext4_fs_context *s_ctx = NULL; struct fs_context *fc = NULL; int ret = -ENOMEM; @@ -2477,15 +2477,11 @@ static int parse_apply_sb_mount_options(struct super_block *sb, if (!sbi->s_es->s_mount_opts[0]) return 0; - s_mount_opts = kstrndup(sbi->s_es->s_mount_opts, - sizeof(sbi->s_es->s_mount_opts), - GFP_KERNEL); - if (!s_mount_opts) - return ret; + strscpy_pad(s_mount_opts, sbi->s_es->s_mount_opts); fc = kzalloc(sizeof(struct fs_context), GFP_KERNEL); if (!fc) - goto out_free; + return -ENOMEM; s_ctx = kzalloc(sizeof(struct ext4_fs_context), GFP_KERNEL); if (!s_ctx) @@ -2517,11 +2513,8 @@ static int parse_apply_sb_mount_options(struct super_block *sb, ret = 0; out_free: - if (fc) { - ext4_fc_free(fc); - kfree(fc); - } - kfree(s_mount_opts); + ext4_fc_free(fc); + kfree(fc); return ret; }

2 weeks, 3 days

2
1
0 0

FAILED: patch "[PATCH] spi: cadence-quadspi: Flush posted register writes before DAC" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 1ad55767e77a853c98752ed1e33b68049a243bd7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101634-glare-unrivaled-70bf@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1ad55767e77a853c98752ed1e33b68049a243bd7 Mon Sep 17 00:00:00 2001 From: Pratyush Yadav <pratyush(a)kernel.org> Date: Sat, 6 Sep 2025 00:29:56 +0530 Subject: [PATCH] spi: cadence-quadspi: Flush posted register writes before DAC access cqspi_read_setup() and cqspi_write_setup() program the address width as the last step in the setup. This is likely to be immediately followed by a DAC region read/write. On TI K3 SoCs the DAC region is on a different endpoint from the register region. This means that the order of the two operations is not guaranteed, and they might be reordered at the interconnect level. It is possible that the DAC read/write goes through before the address width update goes through. In this situation if the previous command used a different address width the OSPI command is sent with the wrong number of address bytes, resulting in an invalid command and undefined behavior. Read back the size register to make sure the write gets flushed before accessing the DAC region. Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller") CC: stable(a)vger.kernel.org Reviewed-by: Pratyush Yadav <pratyush(a)kernel.org> Signed-off-by: Pratyush Yadav <pratyush(a)kernel.org> Signed-off-by: Santhosh Kumar K <s-k6(a)ti.com> Message-ID: <20250905185958.3575037-3-s-k6(a)ti.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index eaf9a0f522d5..447a32a08a93 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -719,6 +719,7 @@ static int cqspi_read_setup(struct cqspi_flash_pdata *f_pdata, reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; reg |= (op->addr.nbytes - 1); writel(reg, reg_base + CQSPI_REG_SIZE); + readl(reg_base + CQSPI_REG_SIZE); /* Flush posted write. */ return 0; } @@ -1063,6 +1064,7 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata, reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; reg |= (op->addr.nbytes - 1); writel(reg, reg_base + CQSPI_REG_SIZE); + readl(reg_base + CQSPI_REG_SIZE); /* Flush posted write. */ return 0; }

2 weeks, 3 days

2
1
0 0

FAILED: patch "[PATCH] phy: cadence: cdns-dphy: Update calibration wait time for" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 2c27aaee934a1b5229152fe33a14f1fdf50da143 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025101626-squeamish-relock-6780@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 2c27aaee934a1b5229152fe33a14f1fdf50da143 Mon Sep 17 00:00:00 2001 From: Devarsh Thakkar <devarsht(a)ti.com> Date: Fri, 4 Jul 2025 18:29:15 +0530 Subject: [PATCH] phy: cadence: cdns-dphy: Update calibration wait time for startup state machine Do read-modify-write so that we re-use the characterized reset value as specified in TRM [1] to program calibration wait time which defines number of cycles to wait for after startup state machine is in bandgap enable state. This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's AM62L and J721E SoC since earlier calibration wait time was getting overwritten to zero value thus failing the PLL to lockup and causing timeout. [1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2): Link: https://www.ti.com/lit/pdf/spruj83 Cc: stable(a)vger.kernel.org Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support") Signed-off-by: Devarsh Thakkar <devarsht(a)ti.com> Tested-by: Harikrishna Shenoy <h-shenoy(a)ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com Signed-off-by: Vinod Koul <vkoul(a)kernel.org> diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c index da8de0a9d086..24a25606996c 100644 --- a/drivers/phy/cadence/cdns-dphy.c +++ b/drivers/phy/cadence/cdns-dphy.c @@ -30,6 +30,7 @@ #define DPHY_CMN_SSM DPHY_PMA_CMN(0x20) #define DPHY_CMN_SSM_EN BIT(0) +#define DPHY_CMN_SSM_CAL_WAIT_TIME GENMASK(8, 1) #define DPHY_CMN_TX_MODE_EN BIT(9) #define DPHY_CMN_PWM DPHY_PMA_CMN(0x40) @@ -410,7 +411,8 @@ static int cdns_dphy_power_on(struct phy *phy) writel(reg, dphy->regs + DPHY_BAND_CFG); /* Start TX state machine. */ - writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN, + reg = readl(dphy->regs + DPHY_CMN_SSM); + writel((reg & DPHY_CMN_SSM_CAL_WAIT_TIME) | DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN, dphy->regs + DPHY_CMN_SSM); ret = cdns_dphy_wait_for_pll_lock(dphy);

2 weeks, 3 days

2
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2025