January 2025 - Linux-stable-mirror

[PATCH 6.6] Revert "PCI: Use preserve_config in place of pci_flags"

by Terry Tritton

This reverts commit 3e221877dd92dfeccc840700868e7fef2675181b which is commit 7246a4520b4bf1494d7d030166a11b5226f6d508 upstream. This patch causes a regression in cuttlefish/crossvm boot on arm64. The patch was part of a series that when applied will not cause a regression but this patch was backported to the 6.6 branch by itself. The other patches do not apply cleanly to the 6.6 branch. Signed-off-by: Terry Tritton <terry.tritton(a)linaro.org> --- drivers/pci/controller/pci-host-common.c | 4 ++++ drivers/pci/probe.c | 20 +++++++++++--------- 2 files changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c index e2602e38ae45..6be3266cd7b5 100644 --- a/drivers/pci/controller/pci-host-common.c +++ b/drivers/pci/controller/pci-host-common.c @@ -73,6 +73,10 @@ int pci_host_common_probe(struct platform_device *pdev) if (IS_ERR(cfg)) return PTR_ERR(cfg); + /* Do not reassign resources if probe only */ + if (!pci_has_flag(PCI_PROBE_ONLY)) + pci_add_flags(PCI_REASSIGN_ALL_BUS); + bridge->sysdata = cfg; bridge->ops = (struct pci_ops *)&ops->pci_ops; bridge->msi_domain = true; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 7e84e472b338..03b519a22840 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -3096,18 +3096,20 @@ int pci_host_probe(struct pci_host_bridge *bridge) bus = bridge->bus; - /* If we must preserve the resource configuration, claim now */ - if (bridge->preserve_config) - pci_bus_claim_resources(bus); - /* - * Assign whatever was left unassigned. If we didn't claim above, - * this will reassign everything. + * We insert PCI resources into the iomem_resource and + * ioport_resource trees in either pci_bus_claim_resources() + * or pci_bus_assign_resources(). */ - pci_assign_unassigned_root_bus_resources(bus); + if (pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_claim_resources(bus); + } else { + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } pci_bus_add_devices(bus); return 0; -- 2.39.5

3 months

2
1
0 0

[PATCH 6.1] Revert "PCI: Use preserve_config in place of pci_flags"

by Terry Tritton

This reverts commit f858b0fab28d8bc2d0f0e8cd4afc3216f347cfcc which is commit 7246a4520b4bf1494d7d030166a11b5226f6d508 upstream. This patch causes a regression in cuttlefish/crossvm boot on arm64. The patch was part of a series that when applied will not cause a regression but this patch was backported to the 6.1 branch by itself. The other patches do not apply cleanly to the 6.1 branch. Signed-off-by: Terry Tritton <terry.tritton(a)linaro.org> --- drivers/pci/controller/pci-host-common.c | 4 ++++ drivers/pci/probe.c | 20 +++++++++++--------- 2 files changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c index fd3020a399cf..d3924a44db02 100644 --- a/drivers/pci/controller/pci-host-common.c +++ b/drivers/pci/controller/pci-host-common.c @@ -73,6 +73,10 @@ int pci_host_common_probe(struct platform_device *pdev) if (IS_ERR(cfg)) return PTR_ERR(cfg); + /* Do not reassign resources if probe only */ + if (!pci_has_flag(PCI_PROBE_ONLY)) + pci_add_flags(PCI_REASSIGN_ALL_BUS); + bridge->sysdata = cfg; bridge->ops = (struct pci_ops *)&ops->pci_ops; bridge->msi_domain = true; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index fbb47954a96c..5c1ab9ee65eb 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -3082,18 +3082,20 @@ int pci_host_probe(struct pci_host_bridge *bridge) bus = bridge->bus; - /* If we must preserve the resource configuration, claim now */ - if (bridge->preserve_config) - pci_bus_claim_resources(bus); - /* - * Assign whatever was left unassigned. If we didn't claim above, - * this will reassign everything. + * We insert PCI resources into the iomem_resource and + * ioport_resource trees in either pci_bus_claim_resources() + * or pci_bus_assign_resources(). */ - pci_assign_unassigned_root_bus_resources(bus); + if (pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_claim_resources(bus); + } else { + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } pci_bus_add_devices(bus); return 0; -- 2.39.5

3 months

2
1
0 0

[PATCH 6.1] fscache: delete fscache_cookie_lru_timer when fscache exits to avoid UAF

by Vasiliy Kovalev

From: Baokun Li <libaokun1(a)huawei.com> commit 72a6e22c604c95ddb3b10b5d3bb85b6ff4dbc34f upstream. The fscache_cookie_lru_timer is initialized when the fscache module is inserted, but is not deleted when the fscache module is removed. If timer_reduce() is called before removing the fscache module, the fscache_cookie_lru_timer will be added to the timer list of the current cpu. Afterwards, a use-after-free will be triggered in the softIRQ after removing the fscache module, as follows: ================================================================== BUG: unable to handle page fault for address: fffffbfff803c9e9 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 21ffea067 P4D 21ffea067 PUD 21ffe6067 PMD 110a7c067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Tainted: G W 6.11.0-rc3 #855 Tainted: [W]=WARN RIP: 0010:__run_timer_base.part.0+0x254/0x8a0 Call Trace: <IRQ> tmigr_handle_remote_up+0x627/0x810 __walk_groups.isra.0+0x47/0x140 tmigr_handle_remote+0x1fa/0x2f0 handle_softirqs+0x180/0x590 irq_exit_rcu+0x84/0xb0 sysvec_apic_timer_interrupt+0x6e/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:default_idle+0xf/0x20 default_idle_call+0x38/0x60 do_idle+0x2b5/0x300 cpu_startup_entry+0x54/0x60 start_secondary+0x20d/0x280 common_startup_64+0x13e/0x148 </TASK> Modules linked in: [last unloaded: netfs] ================================================================== Therefore delete fscache_cookie_lru_timer when removing the fscahe module. Fixes: 12bb21a29c19 ("fscache: Implement cookie user counting and resource pinning") Cc: stable(a)kernel.org Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Link: https://lore.kernel.org/r/20240826112056.2458299-1-libaokun@huaweicloud.com Acked-by: David Howells <dhowells(a)redhat.com> Signed-off-by: Christian Brauner <brauner(a)kernel.org> [kovalev: use the `del_timer_sync()` call instead of `timer_shutdown_sync()`] Signed-off-by: Vasiliy Kovalev <kovalev(a)altlinux.org> --- Backport to fix CVE-2024-46786 Link: https://www.cve.org/CVERecord/?id=CVE-2024-46786 --- fs/fscache/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/fscache/main.c b/fs/fscache/main.c index dad85fd84f6f9f..dc37c9df3bef7d 100644 --- a/fs/fscache/main.c +++ b/fs/fscache/main.c @@ -114,6 +114,7 @@ static void __exit fscache_exit(void) kmem_cache_destroy(fscache_cookie_jar); fscache_proc_cleanup(); + del_timer_sync(&fscache_cookie_lru_timer); destroy_workqueue(fscache_wq); pr_notice("Unloaded\n"); } -- 2.33.8

3 months

2
1
0 0

[PATCH 5.10] Revert "PCI: Use preserve_config in place of pci_flags"

by Terry Tritton

This reverts commit 0dde3ae52a0dcc5cdfe2185ec58ec52b43fda22e which is commit 7246a4520b4bf1494d7d030166a11b5226f6d508 upstream. This patch causes a regression in cuttlefish/crossvm boot on arm64. The patch was part of a series that when applied will not cause a regression but this patch was backported to the 5.10 branch by itself. The other patches do not apply cleanly to the 5.10 branch. Signed-off-by: Terry Tritton <terry.tritton(a)linaro.org> --- drivers/pci/controller/pci-host-common.c | 4 ++++ drivers/pci/probe.c | 20 +++++++++++--------- 2 files changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c index 2525bd043261..6ce34a1deecb 100644 --- a/drivers/pci/controller/pci-host-common.c +++ b/drivers/pci/controller/pci-host-common.c @@ -71,6 +71,10 @@ int pci_host_common_probe(struct platform_device *pdev) if (IS_ERR(cfg)) return PTR_ERR(cfg); + /* Do not reassign resources if probe only */ + if (!pci_has_flag(PCI_PROBE_ONLY)) + pci_add_flags(PCI_REASSIGN_ALL_BUS); + bridge->sysdata = cfg; bridge->ops = (struct pci_ops *)&ops->pci_ops; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index b0ac721e047d..02a75f3b5920 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -3018,18 +3018,20 @@ int pci_host_probe(struct pci_host_bridge *bridge) bus = bridge->bus; - /* If we must preserve the resource configuration, claim now */ - if (bridge->preserve_config) - pci_bus_claim_resources(bus); - /* - * Assign whatever was left unassigned. If we didn't claim above, - * this will reassign everything. + * We insert PCI resources into the iomem_resource and + * ioport_resource trees in either pci_bus_claim_resources() + * or pci_bus_assign_resources(). */ - pci_assign_unassigned_root_bus_resources(bus); + if (pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_claim_resources(bus); + } else { + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } pci_bus_add_devices(bus); return 0; -- 2.39.5

3 months

2
1
0 0

[PATCH 6.1] Partial revert of xhci: use pm_ptr() instead #ifdef for CONFIG_PM conditionals

by Ron Economos

This fixes the build when CONFIG_PM is not set Signed-off-by: Ron Economos <re(a)w6rz.net> --- drivers/usb/host/xhci-pci.c | 8 +++++++- include/linux/usb/hcd.h | 2 ++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1d71e8ef9919..2ff049e02326 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -571,6 +571,7 @@ static void xhci_pci_remove(struct pci_dev *dev) pci_set_power_state(dev, PCI_D3hot); } +#ifdef CONFIG_PM /* * In some Intel xHCI controllers, in order to get D3 working, * through a vendor specific SSIC CONFIG register at offset 0x883c, @@ -720,6 +721,7 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd) if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) pci_set_power_state(pdev, PCI_D3hot); } +#endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -761,17 +763,21 @@ static struct pci_driver xhci_pci_driver = { /* suspend and resume implemented later */ .shutdown = usb_hcd_pci_shutdown, +#ifdef CONFIG_PM .driver = { - .pm = pm_ptr(&usb_hcd_pci_pm_ops), + .pm = &usb_hcd_pci_pm_ops }, +#endif }; static int __init xhci_pci_init(void) { xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides); +#ifdef CONFIG_PM xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; xhci_pci_hc_driver.pci_resume = xhci_pci_resume; xhci_pci_hc_driver.shutdown = xhci_pci_shutdown; +#endif return pci_register_driver(&xhci_pci_driver); } module_init(xhci_pci_init); diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 575716d3672a..cd667acf6267 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -486,7 +486,9 @@ extern void usb_hcd_pci_shutdown(struct pci_dev *dev); extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); +#ifdef CONFIG_PM extern const struct dev_pm_ops usb_hcd_pci_pm_ops; +#endif #endif /* CONFIG_USB_PCI */ /* pci-ish (pdev null is ok) buffer alloc/mapping support */ -- 2.43.0

3 months

3
2
0 0

[PATCH 5.15] Revert "PCI: Use preserve_config in place of pci_flags"

by Terry Tritton

This reverts commit c1a1393f7844c645389e5f1a3f1f0350e0fb9316 which is commit 7246a4520b4bf1494d7d030166a11b5226f6d508 upstream. This patch causes a regression in cuttlefish/crossvm boot on arm64. The patch was part of a series that when applied will not cause a regression but this patch was backported to the 5.15 branch by itself. The other patches do not apply cleanly to the 5.15 branch. Signed-off-by: Terry Tritton <terry.tritton(a)linaro.org> --- drivers/pci/controller/pci-host-common.c | 4 ++++ drivers/pci/probe.c | 20 +++++++++++--------- 2 files changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c index fd3020a399cf..d3924a44db02 100644 --- a/drivers/pci/controller/pci-host-common.c +++ b/drivers/pci/controller/pci-host-common.c @@ -73,6 +73,10 @@ int pci_host_common_probe(struct platform_device *pdev) if (IS_ERR(cfg)) return PTR_ERR(cfg); + /* Do not reassign resources if probe only */ + if (!pci_has_flag(PCI_PROBE_ONLY)) + pci_add_flags(PCI_REASSIGN_ALL_BUS); + bridge->sysdata = cfg; bridge->ops = (struct pci_ops *)&ops->pci_ops; bridge->msi_domain = true; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index cda6650aa3b1..dd2134c7c419 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -3048,18 +3048,20 @@ int pci_host_probe(struct pci_host_bridge *bridge) bus = bridge->bus; - /* If we must preserve the resource configuration, claim now */ - if (bridge->preserve_config) - pci_bus_claim_resources(bus); - /* - * Assign whatever was left unassigned. If we didn't claim above, - * this will reassign everything. + * We insert PCI resources into the iomem_resource and + * ioport_resource trees in either pci_bus_claim_resources() + * or pci_bus_assign_resources(). */ - pci_assign_unassigned_root_bus_resources(bus); + if (pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_claim_resources(bus); + } else { + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } pci_bus_add_devices(bus); return 0; -- 2.39.5

3 months

2
1
0 0

[PATCH v6.1-v5.10] gpiolib: cdev: Fix use after free in lineinfo_changed_notify

by hsimeliere.opensource＠witekio.com

From: Zhongqiu Han <quic_zhonhan(a)quicinc.com> [ Upstream commit 02f6b0e1ec7e0e7d059dddc893645816552039da ] The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain. Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info") Signed-off-by: Zhongqiu Han <quic_zhonhan(a)quicinc.com> Link: https://lore.kernel.org/r/20240505141156.2944912-1-quic_zhonhan@quicinc.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Bruno VERNAY <bruno.vernay(a)se.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource(a)witekio.com> --- drivers/gpio/gpiolib-cdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c index 55f640ef3fee..897d20996a8c 100644 --- a/drivers/gpio/gpiolib-cdev.c +++ b/drivers/gpio/gpiolib-cdev.c @@ -2860,9 +2860,9 @@ static int gpio_chrdev_release(struct inode *inode, struct file *file) struct gpio_chardev_data *cdev = file->private_data; struct gpio_device *gdev = cdev->gdev; - bitmap_free(cdev->watched_lines); blocking_notifier_chain_unregister(&gdev->notifier, &cdev->lineinfo_changed_nb); + bitmap_free(cdev->watched_lines); put_device(&gdev->dev); kfree(cdev); -- 2.43.0

3 months

2
1
0 0

[PATCH v6.6-v6.1] block: fix uaf for flush rq while iterating tags

by hsimeliere.opensource＠witekio.com

From: Yu Kuai <yukuai3(a)huawei.com> [ Upstream commit 3802f73bd80766d70f319658f334754164075bc3 ] blk_mq_clear_flush_rq_mapping() is not called during scsi probe, by checking blk_queue_init_done(). However, QUEUE_FLAG_INIT_DONE is cleared in del_gendisk by commit aec89dc5d421 ("block: keep q_usage_counter in atomic mode after del_gendisk"), hence for disk like scsi, following blk_mq_destroy_queue() will not clear flush rq from tags->rqs[] as well, cause following uaf that is found by our syzkaller for v6.6: ================================================================== BUG: KASAN: slab-use-after-free in blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 Read of size 4 at addr ffff88811c969c20 by task kworker/1:2H/224909 CPU: 1 PID: 224909 Comm: kworker/1:2H Not tainted 6.6.0-ga836a5060850 #32 Workqueue: kblockd blk_mq_timeout_work Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 blk_mq_find_and_get_req+0x16e/0x1a0 block/blk-mq-tag.c:261 bt_iter block/blk-mq-tag.c:288 [inline] __sbitmap_for_each_set include/linux/sbitmap.h:295 [inline] sbitmap_for_each_set include/linux/sbitmap.h:316 [inline] bt_for_each+0x455/0x790 block/blk-mq-tag.c:325 blk_mq_queue_tag_busy_iter+0x320/0x740 block/blk-mq-tag.c:534 blk_mq_timeout_work+0x1a3/0x7b0 block/blk-mq.c:1673 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 942: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:374 [inline] __kasan_kmalloc mm/kasan/common.c:383 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:380 kasan_kmalloc include/linux/kasan.h:198 [inline] __do_kmalloc_node mm/slab_common.c:1007 [inline] __kmalloc_node+0x69/0x170 mm/slab_common.c:1014 kmalloc_node include/linux/slab.h:620 [inline] kzalloc_node include/linux/slab.h:732 [inline] blk_alloc_flush_queue+0x144/0x2f0 block/blk-flush.c:499 blk_mq_alloc_hctx+0x601/0x940 block/blk-mq.c:3788 blk_mq_alloc_and_init_hctx+0x27f/0x330 block/blk-mq.c:4261 blk_mq_realloc_hw_ctxs+0x488/0x5e0 block/blk-mq.c:4294 blk_mq_init_allocated_queue+0x188/0x860 block/blk-mq.c:4350 blk_mq_init_queue_data block/blk-mq.c:4166 [inline] blk_mq_init_queue+0x8d/0x100 block/blk-mq.c:4176 scsi_alloc_sdev+0x843/0xd50 drivers/scsi/scsi_scan.c:335 scsi_probe_and_add_lun+0x77c/0xde0 drivers/scsi/scsi_scan.c:1189 __scsi_scan_target+0x1fc/0x5a0 drivers/scsi/scsi_scan.c:1727 scsi_scan_channel drivers/scsi/scsi_scan.c:1815 [inline] scsi_scan_channel+0x14b/0x1e0 drivers/scsi/scsi_scan.c:1791 scsi_scan_host_selected+0x2fe/0x400 drivers/scsi/scsi_scan.c:1844 scsi_scan+0x3a0/0x3f0 drivers/scsi/scsi_sysfs.c:151 store_scan+0x2a/0x60 drivers/scsi/scsi_sysfs.c:191 dev_attr_store+0x5c/0x90 drivers/base/core.c:2388 sysfs_kf_write+0x11c/0x170 fs/sysfs/file.c:136 kernfs_fop_write_iter+0x3fc/0x610 fs/kernfs/file.c:338 call_write_iter include/linux/fs.h:2083 [inline] new_sync_write+0x1b4/0x2d0 fs/read_write.c:493 vfs_write+0x76c/0xb00 fs/read_write.c:586 ksys_write+0x127/0x250 fs/read_write.c:639 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Freed by task 244687: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522 ____kasan_slab_free mm/kasan/common.c:236 [inline] __kasan_slab_free+0x12a/0x1b0 mm/kasan/common.c:244 kasan_slab_free include/linux/kasan.h:164 [inline] slab_free_hook mm/slub.c:1815 [inline] slab_free_freelist_hook mm/slub.c:1841 [inline] slab_free mm/slub.c:3807 [inline] __kmem_cache_free+0xe4/0x520 mm/slub.c:3820 blk_free_flush_queue+0x40/0x60 block/blk-flush.c:520 blk_mq_hw_sysfs_release+0x4a/0x170 block/blk-mq-sysfs.c:37 kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x119/0x140 lib/kobject.c:737 blk_mq_release+0x24f/0x3f0 block/blk-mq.c:4144 blk_free_queue block/blk-core.c:298 [inline] blk_put_queue+0xe2/0x180 block/blk-core.c:314 blkg_free_workfn+0x376/0x6e0 block/blk-cgroup.c:144 process_one_work+0x7c4/0x1450 kernel/workqueue.c:2631 process_scheduled_works kernel/workqueue.c:2704 [inline] worker_thread+0x804/0xe40 kernel/workqueue.c:2785 kthread+0x346/0x450 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:293 Other than blk_mq_clear_flush_rq_mapping(), the flag is only used in blk_register_queue() from initialization path, hence it's safe not to clear the flag in del_gendisk. And since QUEUE_FLAG_REGISTERED already make sure that queue should only be registered once, there is no need to test the flag as well. Fixes: 6cfeadbff3f8 ("blk-mq: don't clear flush_rq from tags->rqs[]") Depends-on: commit aec89dc5d421 ("block: keep q_usage_counter in atomic mode after del_gendisk") Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Link: https://lore.kernel.org/r/20241104110005.1412161-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: BRUNO VERNAY <bruno.vernay(a)se.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource(a)witekio.com> --- block/blk-sysfs.c | 6 ++---- block/genhd.c | 9 +++------ 2 files changed, 5 insertions(+), 10 deletions(-) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index a82bdec923b2..c74e8273511a 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -858,10 +858,8 @@ int blk_register_queue(struct gendisk *disk) * faster to shut down and is made fully functional here as * request_queues for non-existent devices never get registered. */ - if (!blk_queue_init_done(q)) { - blk_queue_flag_set(QUEUE_FLAG_INIT_DONE, q); - percpu_ref_switch_to_percpu(&q->q_usage_counter); - } + blk_queue_flag_set(QUEUE_FLAG_INIT_DONE, q); + percpu_ref_switch_to_percpu(&q->q_usage_counter); return ret; diff --git a/block/genhd.c b/block/genhd.c index 146ce13b192b..8256e11f85b7 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -685,13 +685,10 @@ void del_gendisk(struct gendisk *disk) * If the disk does not own the queue, allow using passthrough requests * again. Else leave the queue frozen to fail all I/O. */ - if (!test_bit(GD_OWNS_QUEUE, &disk->state)) { - blk_queue_flag_clear(QUEUE_FLAG_INIT_DONE, q); + if (!test_bit(GD_OWNS_QUEUE, &disk->state)) __blk_mq_unfreeze_queue(q, true); - } else { - if (queue_is_mq(q)) - blk_mq_exit_queue(q); - } + else if (queue_is_mq(q)) + blk_mq_exit_queue(q); } EXPORT_SYMBOL(del_gendisk); -- 2.43.0

3 months

2
1
0 0

[PATCH 6.1] Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync

by Vasiliy Kovalev

From: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> commit 18fd04ad856df07733f5bb07e7f7168e7443d393 upstream. This checks if the ACL connection remains valid as it could be destroyed while hci_enhanced_setup_sync is pending on cmd_sync leading to the following trace: BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60 Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37 CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? hci_enhanced_setup_sync+0x91b/0xa60 print_report+0x152/0x4c0 ? hci_enhanced_setup_sync+0x91b/0xa60 ? __virt_addr_valid+0x1fa/0x420 ? hci_enhanced_setup_sync+0x91b/0xa60 kasan_report+0xda/0x1b0 ? hci_enhanced_setup_sync+0x91b/0xa60 hci_enhanced_setup_sync+0x91b/0xa60 ? __pfx_hci_enhanced_setup_sync+0x10/0x10 ? __pfx___mutex_lock+0x10/0x10 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x167/0x240 worker_thread+0x5b7/0xf60 ? __kthread_parkme+0xac/0x1c0 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x293/0x360 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 34: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __hci_conn_add+0x187/0x17d0 hci_connect_sco+0x2e1/0xb90 sco_sock_connect+0x2a2/0xb80 __sys_connect+0x227/0x2a0 __x64_sys_connect+0x6d/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 37: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x101/0x160 kfree+0xd0/0x250 device_release+0x9a/0x210 kobject_put+0x151/0x280 hci_conn_del+0x448/0xbf0 hci_abort_conn_sync+0x46f/0x980 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 worker_thread+0x5b7/0xf60 kthread+0x293/0x360 ret_from_fork+0x2f/0x70 ret_from_fork_asm+0x1a/0x30 Cc: stable(a)vger.kernel.org Fixes: e07a06b4eb41 ("Bluetooth: Convert SCO configure_datapath to hci_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> [kovalev: inline `hci_conn_valid()` functionality directly into `hci_enhanced_setup_sync()` to avoid dependencies during backporting.] Link: https://lore.kernel.org/all/2024101446-approve-rants-581d@gregkh/ Signed-off-by: Vasiliy Kovalev <kovalev(a)altlinux.org> --- Backport to fix CVE-2024-50029 Link: https://www.cve.org/CVERecord/?id=CVE-2024-50029 --- net/bluetooth/hci_conn.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 49b9dd21b73ea6..3906324b99d41a 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -390,9 +390,22 @@ static int hci_enhanced_setup_sync(struct hci_dev *hdev, void *data) __u16 handle = conn_handle->handle; struct hci_cp_enhanced_setup_sync_conn cp; const struct sco_param *param; + struct hci_conn_hash *hdev_conn_hash = &hdev->conn_hash; + struct hci_conn *hdev_conn; kfree(conn_handle); + rcu_read_lock(); + list_for_each_entry_rcu(hdev_conn, &hdev_conn_hash->list, list) { + if (hdev_conn == conn) { + rcu_read_unlock(); + goto conn_valid; + } + } + rcu_read_unlock(); + return -ECANCELED; + +conn_valid: bt_dev_dbg(hdev, "hcon %p", conn); configure_datapath_sync(hdev, &conn->codec); -- 2.33.8

3 months

1
0
0 0

[PATCH] Revert v6.2-rc1 and later "ARM: dts: bcm2835-rpi: Use firmware clocks for display"

by H. Nikolaus Schaller

This reverts commit d02f02c28f5561cf5b2345f8b4c910bd98d18553. I tried to upgrade a RasPi 3B+ with Waveshare 7inch HDMI LCD from 6.1.y to 6.6.y but found that the display is broken with this log message: [ 17.776315] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_drm_unregister [vc4]) [ 17.784034] platform 3f806000.vec: deferred probe pending Some tests revealed that while 6.1.y works, 6.2-rc1 is already broken but all newer kernels as well. And a bisect did lead me to this patch. I could repair several versions up to 6.13-rc7 by doing this revert. Newer kernels have just to take care of commit f702475b839c ("ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi") but that is straightforward. Fixes: d02f02c28f55 ("ARM: dts: bcm2835-rpi: Use firmware clocks for display") Signed-off-by: H. Nikolaus Schaller <hns(a)goldelico.com> --- arch/arm/boot/dts/bcm2835-rpi-common.dtsi | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi index 4e7b4a592da7c..8a55b6cded592 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi @@ -7,23 +7,6 @@ #include <dt-bindings/power/raspberrypi-power.h> -&firmware { - firmware_clocks: clocks { - compatible = "raspberrypi,firmware-clocks"; - #clock-cells = <1>; - }; -}; - -&hdmi { - clocks = <&firmware_clocks 9>, - <&firmware_clocks 13>; - clock-names = "pixel", "hdmi"; -}; - &v3d { power-domains = <&power RPI_POWER_DOMAIN_V3D>; }; - -&vec { - clocks = <&firmware_clocks 15>; -}; -- 2.47.0

3 months

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2025