January 2025 - Linux-stable-mirror

[PATCH 1/2] PCI/MSI: Add MSIX option to write to ENTRY_DATA before any reads

by dullfire＠yahoo.com

From: Jonathan Currier <dullfire(a)yahoo.com> Commit 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") introduces a readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA. This is correct, however some hardware, like the Sun Neptune chips, the niu module, will cause an error and/or fatal trap if any MSIX table entry is read before the corresponding ENTRY_DATA field is written to. This patch adds an optional early writel() in msix_prepare_msi_desc(). Cc: stable(a)vger.kernel.org Signed-off-by: Jonathan Currier <dullfire(a)yahoo.com> --- drivers/pci/msi/msi.c | 2 ++ include/linux/pci.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/pci/msi/msi.c b/drivers/pci/msi/msi.c index 3a45879d85db..50d87fb5e37f 100644 --- a/drivers/pci/msi/msi.c +++ b/drivers/pci/msi/msi.c @@ -611,6 +611,8 @@ void msix_prepare_msi_desc(struct pci_dev *dev, struct msi_desc *desc) if (desc->pci.msi_attrib.can_mask) { void __iomem *addr = pci_msix_desc_addr(desc); + if (dev->dev_flags & PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST) + writel(0, addr + PCI_MSIX_ENTRY_DATA); desc->pci.msix_ctrl = readl(addr + PCI_MSIX_ENTRY_VECTOR_CTRL); } } diff --git a/include/linux/pci.h b/include/linux/pci.h index 37d97bef060f..b8b95b58d522 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -245,6 +245,8 @@ enum pci_dev_flags { PCI_DEV_FLAGS_NO_RELAXED_ORDERING = (__force pci_dev_flags_t) (1 << 11), /* Device does honor MSI masking despite saying otherwise */ PCI_DEV_FLAGS_HAS_MSI_MASKING = (__force pci_dev_flags_t) (1 << 12), + /* Device requires write to PCI_MSIX_ENTRY_DATA before any MSIX reads */ + PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST = (__force pci_dev_flags_t) (1 << 13), }; enum pci_irq_reroute_variant { -- 2.45.2

9 hours, 35 minutes

5
7
0 0

[PATCH 2/2] net/niu: niu requires MSIX ENTRY_DATA fields touch before entry reads

by dullfire＠yahoo.com

From: Jonathan Currier <dullfire(a)yahoo.com> Fix niu_try_msix() to not cause a fatal trap on sparc systems. Set PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST on the struct pci_dev to work around a bug in the hardware or firmware. For each vector entry in the msix table, niu chips will cause a fatal trap if any registers in that entry are read before that entries' ENTRY_DATA register is written to. Testing indicates writes to other registers are not sufficient to prevent the fatal trap, however the value does not appear to matter. This only needs to happen once after power up, so simply rebooting into a kernel lacking this fix will NOT cause the trap. NON-RESUMABLE ERROR: Reporting on cpu 64 NON-RESUMABLE ERROR: TPC [0x00000000005f6900] <msix_prepare_msi_desc+0x90/0xa0> NON-RESUMABLE ERROR: RAW [4010000000000016:00000e37f93e32ff:0000000202000080:ffffffffffffffff NON-RESUMABLE ERROR: 0000000800000000:0000000000000000:0000000000000000:0000000000000000] NON-RESUMABLE ERROR: handle [0x4010000000000016] stick [0x00000e37f93e32ff] NON-RESUMABLE ERROR: type [precise nonresumable] NON-RESUMABLE ERROR: attrs [0x02000080] < ASI sp-faulted priv > NON-RESUMABLE ERROR: raddr [0xffffffffffffffff] NON-RESUMABLE ERROR: insn effective address [0x000000c50020000c] NON-RESUMABLE ERROR: size [0x8] NON-RESUMABLE ERROR: asi [0x00] CPU: 64 UID: 0 PID: 745 Comm: kworker/64:1 Not tainted 6.11.5 #63 Workqueue: events work_for_cpu_fn TSTATE: 0000000011001602 TPC: 00000000005f6900 TNPC: 00000000005f6904 Y: 00000000 Not tainted TPC: <msix_prepare_msi_desc+0x90/0xa0> g0: 00000000000002e9 g1: 000000000000000c g2: 000000c50020000c g3: 0000000000000100 g4: ffff8000470307c0 g5: ffff800fec5be000 g6: ffff800047a08000 g7: 0000000000000000 o0: ffff800014feb000 o1: ffff800047a0b620 o2: 0000000000000011 o3: ffff800047a0b620 o4: 0000000000000080 o5: 0000000000000011 sp: ffff800047a0ad51 ret_pc: 00000000005f7128 RPC: <__pci_enable_msix_range+0x3cc/0x460> l0: 000000000000000d l1: 000000000000c01f l2: ffff800014feb0a8 l3: 0000000000000020 l4: 000000000000c000 l5: 0000000000000001 l6: 0000000020000000 l7: ffff800047a0b734 i0: ffff800014feb000 i1: ffff800047a0b730 i2: 0000000000000001 i3: 000000000000000d i4: 0000000000000000 i5: 0000000000000000 i6: ffff800047a0ae81 i7: 00000000101888b0 I7: <niu_try_msix.constprop.0+0xc0/0x130 [niu]> Call Trace: [<00000000101888b0>] niu_try_msix.constprop.0+0xc0/0x130 [niu] [<000000001018f840>] niu_get_invariants+0x183c/0x207c [niu] [<00000000101902fc>] niu_pci_init_one+0x27c/0x2fc [niu] [<00000000005ef3e4>] local_pci_probe+0x28/0x74 [<0000000000469240>] work_for_cpu_fn+0x8/0x1c [<000000000046b008>] process_scheduled_works+0x144/0x210 [<000000000046b518>] worker_thread+0x13c/0x1c0 [<00000000004710e0>] kthread+0xb8/0xc8 [<00000000004060c8>] ret_from_fork+0x1c/0x2c [<0000000000000000>] 0x0 Kernel panic - not syncing: Non-resumable error. Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") Cc: stable(a)vger.kernel.org Signed-off-by: Jonathan Currier <dullfire(a)yahoo.com> --- drivers/net/ethernet/sun/niu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c index 41a27ae58ced..f5449b73b9a7 100644 --- a/drivers/net/ethernet/sun/niu.c +++ b/drivers/net/ethernet/sun/niu.c @@ -9058,6 +9058,8 @@ static void niu_try_msix(struct niu *np, u8 *ldg_num_map) msi_vec[i].entry = i; } + pdev->dev_flags |= PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST; + num_irqs = pci_enable_msix_range(pdev, msi_vec, 1, num_irqs); if (num_irqs < 0) { np->flags &= ~NIU_FLAGS_MSIX; -- 2.45.2

9 hours, 35 minutes

2
1
0 0

[PATCH V4] mm/gup: Clear the LRU flag of a page before adding to LRU batch

by yangge1116＠126.com

From: yangge <yangge1116(a)126.com> If a large number of CMA memory are configured in system (for example, the CMA memory accounts for 50% of the system memory), starting a virtual virtual machine with device passthrough, it will call pin_user_pages_remote(..., FOLL_LONGTERM, ...) to pin memory. Normally if a page is present and in CMA area, pin_user_pages_remote() will migrate the page from CMA area to non-CMA area because of FOLL_LONGTERM flag. But the current code will cause the migration failure due to unexpected page refcounts, and eventually cause the virtual machine fail to start. If a page is added in LRU batch, its refcount increases one, remove the page from LRU batch decreases one. Page migration requires the page is not referenced by others except page mapping. Before migrating a page, we should try to drain the page from LRU batch in case the page is in it, however, folio_test_lru() is not sufficient to tell whether the page is in LRU batch or not, if the page is in LRU batch, the migration will fail. To solve the problem above, we modify the logic of adding to LRU batch. Before adding a page to LRU batch, we clear the LRU flag of the page so that we can check whether the page is in LRU batch by folio_test_lru(page). It's quite valuable, because likely we don't want to blindly drain the LRU batch simply because there is some unexpected reference on a page, as described above. This change makes the LRU flag of a page invisible for longer, which may impact some programs. For example, as long as a page is on a LRU batch, we cannot isolate it, and we cannot check if it's an LRU page. Further, a page can now only be on exactly one LRU batch. This doesn't seem to matter much, because a new page is allocated from buddy and added to the lru batch, or be isolated, it's LRU flag may also be invisible for a long time. Fixes: 9a4e9f3b2d73 ("mm: update get_user_pages_longterm to migrate pages allocated from CMA region") Cc: <stable(a)vger.kernel.org> Signed-off-by: yangge <yangge1116(a)126.com> --- mm/swap.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) V4: Adjust commit message according to David's comments V3: Add fixes tag V2: Adjust code and commit message according to David's comments diff --git a/mm/swap.c b/mm/swap.c index dc205bd..9caf6b0 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -211,10 +211,6 @@ static void folio_batch_move_lru(struct folio_batch *fbatch, move_fn_t move_fn) for (i = 0; i < folio_batch_count(fbatch); i++) { struct folio *folio = fbatch->folios[i]; - /* block memcg migration while the folio moves between lru */ - if (move_fn != lru_add_fn && !folio_test_clear_lru(folio)) - continue; - folio_lruvec_relock_irqsave(folio, &lruvec, &flags); move_fn(lruvec, folio); @@ -255,11 +251,16 @@ static void lru_move_tail_fn(struct lruvec *lruvec, struct folio *folio) void folio_rotate_reclaimable(struct folio *folio) { if (!folio_test_locked(folio) && !folio_test_dirty(folio) && - !folio_test_unevictable(folio) && folio_test_lru(folio)) { + !folio_test_unevictable(folio)) { struct folio_batch *fbatch; unsigned long flags; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock_irqsave(&lru_rotate.lock, flags); fbatch = this_cpu_ptr(&lru_rotate.fbatch); folio_batch_add_and_move(fbatch, folio, lru_move_tail_fn); @@ -352,11 +353,15 @@ static void folio_activate_drain(int cpu) void folio_activate(struct folio *folio) { - if (folio_test_lru(folio) && !folio_test_active(folio) && - !folio_test_unevictable(folio)) { + if (!folio_test_active(folio) && !folio_test_unevictable(folio)) { struct folio_batch *fbatch; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.activate); folio_batch_add_and_move(fbatch, folio, folio_activate_fn); @@ -700,6 +705,11 @@ void deactivate_file_folio(struct folio *folio) return; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.lru_deactivate_file); folio_batch_add_and_move(fbatch, folio, lru_deactivate_file_fn); @@ -716,11 +726,16 @@ void deactivate_file_folio(struct folio *folio) */ void folio_deactivate(struct folio *folio) { - if (folio_test_lru(folio) && !folio_test_unevictable(folio) && - (folio_test_active(folio) || lru_gen_enabled())) { + if (!folio_test_unevictable(folio) && (folio_test_active(folio) || + lru_gen_enabled())) { struct folio_batch *fbatch; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.lru_deactivate); folio_batch_add_and_move(fbatch, folio, lru_deactivate_fn); @@ -737,12 +752,16 @@ void folio_deactivate(struct folio *folio) */ void folio_mark_lazyfree(struct folio *folio) { - if (folio_test_lru(folio) && folio_test_anon(folio) && - folio_test_swapbacked(folio) && !folio_test_swapcache(folio) && - !folio_test_unevictable(folio)) { + if (folio_test_anon(folio) && folio_test_swapbacked(folio) && + !folio_test_swapcache(folio) && !folio_test_unevictable(folio)) { struct folio_batch *fbatch; folio_get(folio); + if (!folio_test_clear_lru(folio)) { + folio_put(folio); + return; + } + local_lock(&cpu_fbatches.lock); fbatch = this_cpu_ptr(&cpu_fbatches.lru_lazyfree); folio_batch_add_and_move(fbatch, folio, lru_lazyfree_fn); -- 2.7.4

5 days, 8 hours

3
9
0 0

[PATCH] hfs/hfsplus: fix slab-out-of-bounds in hfs_bnode_read_key

by Vasiliy Kovalev

Syzbot reported an issue in hfs subsystem: BUG: KASAN: slab-out-of-bounds in memcpy_from_page include/linux/highmem.h:423 [inline] BUG: KASAN: slab-out-of-bounds in hfs_bnode_read fs/hfs/bnode.c:35 [inline] BUG: KASAN: slab-out-of-bounds in hfs_bnode_read_key+0x314/0x450 fs/hfs/bnode.c:70 Write of size 94 at addr ffff8880123cd100 by task syz-executor237/5102 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106 memcpy_from_page include/linux/highmem.h:423 [inline] hfs_bnode_read fs/hfs/bnode.c:35 [inline] hfs_bnode_read_key+0x314/0x450 fs/hfs/bnode.c:70 hfs_brec_insert+0x7f3/0xbd0 fs/hfs/brec.c:159 hfs_cat_create+0x41d/0xa50 fs/hfs/catalog.c:118 hfs_mkdir+0x6c/0xe0 fs/hfs/dir.c:232 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdir fs/namei.c:4300 [inline] __se_sys_mkdir fs/namei.c:4298 [inline] __x64_sys_mkdir+0x6c/0x80 fs/namei.c:4298 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fbdd6057a99 Add a check for key length in hfs_bnode_read_key to prevent out-of-bounds memory access. If the key length is invalid, the key buffer is cleared, improving stability and reliability. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5f3a973ed3dfb85a6683(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=5f3a973ed3dfb85a6683 Cc: stable(a)vger.kernel.org Signed-off-by: Vasiliy Kovalev <kovalev(a)altlinux.org> --- fs/hfs/bnode.c | 6 ++++++ fs/hfsplus/bnode.c | 6 ++++++ 2 files changed, 12 insertions(+) diff --git a/fs/hfs/bnode.c b/fs/hfs/bnode.c index 6add6ebfef8967..cb823a8a6ba960 100644 --- a/fs/hfs/bnode.c +++ b/fs/hfs/bnode.c @@ -67,6 +67,12 @@ void hfs_bnode_read_key(struct hfs_bnode *node, void *key, int off) else key_len = tree->max_key_len + 1; + if (key_len > sizeof(hfs_btree_key) || key_len < 1) { + memset(key, 0, sizeof(hfs_btree_key)); + pr_err("hfs: Invalid key length: %d\n", key_len); + return; + } + hfs_bnode_read(node, key, off, key_len); } diff --git a/fs/hfsplus/bnode.c b/fs/hfsplus/bnode.c index 87974d5e679156..079ea80534f7de 100644 --- a/fs/hfsplus/bnode.c +++ b/fs/hfsplus/bnode.c @@ -67,6 +67,12 @@ void hfs_bnode_read_key(struct hfs_bnode *node, void *key, int off) else key_len = tree->max_key_len + 2; + if (key_len > sizeof(hfsplus_btree_key) || key_len < 1) { + memset(key, 0, sizeof(hfsplus_btree_key)); + pr_err("hfsplus: Invalid key length: %d\n", key_len); + return; + } + hfs_bnode_read(node, key, off, key_len); } -- 2.33.8

1 week

9
18
0 0

[PATCH 1/2] drm/i915: Schedule the HPD poll init work on an unbound workqueue

by Imre Deak

Disabling HPD polling from i915_hpd_poll_init_work() involves probing all display connectors explicitly to account for lost hotplug interrupts. On some platforms (mostly pre-ICL) with HDMI connectors the I2C EDID bit-banging using udelay() triggers in turn the workqueue: i915_hpd_poll_init_work [i915] hogged CPU for >10000us 4 times, consider switching to WQ_UNBOUND warning. Fix the above by scheduling i915_hpd_poll_init_work() on a WQ_UNBOUND workqueue. It's ok to use a system WQ, since i915_hpd_poll_init_work() is properly flushed in intel_hpd_cancel_work(). The connector probing from drm_mode_config::output_poll_work resulting in the same warning is fixed by the next patch. Cc: Tejun Heo <tj(a)kernel.org> Cc: Heiner Kallweit <hkallweit1(a)gmail.com> CC: stable(a)vger.kernel.org # 6.5 Suggested-by: Tejun Heo <tj(a)kernel.org> Suggested-by: Heiner Kallweit <hkallweit1(a)gmail.com> Reported-by: Heiner Kallweit <hkallweit1(a)gmail.com> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9245 Link: https://lore.kernel.org/all/f7e21caa-e98d-e5b5-932a-fe12d27fde9b@gmail.com Signed-off-by: Imre Deak <imre.deak(a)intel.com> --- drivers/gpu/drm/i915/display/intel_hotplug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c index e8562f6f8bb44..accc2fec562a0 100644 --- a/drivers/gpu/drm/i915/display/intel_hotplug.c +++ b/drivers/gpu/drm/i915/display/intel_hotplug.c @@ -774,7 +774,7 @@ void intel_hpd_poll_enable(struct drm_i915_private *dev_priv) * As well, there's no issue if we race here since we always reschedule * this worker anyway */ - queue_work(dev_priv->unordered_wq, + queue_work(system_unbound_wq, &dev_priv->display.hotplug.poll_init_work); } @@ -803,7 +803,7 @@ void intel_hpd_poll_disable(struct drm_i915_private *dev_priv) return; WRITE_ONCE(dev_priv->display.hotplug.poll_enabled, false); - queue_work(dev_priv->unordered_wq, + queue_work(system_unbound_wq, &dev_priv->display.hotplug.poll_init_work); } -- 2.37.2

1 week, 1 day

4
5
0 0

[PATCH] dmaengine: ti: k3-udma: Add missing locking

by Ronald Wahl

From: Ronald Wahl <ronald.wahl(a)legrand.com> Recent kernels complain about a missing lock in k3-udma.c when the lock validator is enabled: [ 4.128073] WARNING: CPU: 0 PID: 746 at drivers/dma/ti/../virt-dma.h:169 udma_start.isra.0+0x34/0x238 [ 4.137352] CPU: 0 UID: 0 PID: 746 Comm: kworker/0:3 Not tainted 6.12.9-arm64 #28 [ 4.144867] Hardware name: pp-v12 (DT) [ 4.148648] Workqueue: events udma_check_tx_completion [ 4.153841] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.160834] pc : udma_start.isra.0+0x34/0x238 [ 4.165227] lr : udma_start.isra.0+0x30/0x238 [ 4.169618] sp : ffffffc083cabcf0 [ 4.172963] x29: ffffffc083cabcf0 x28: 0000000000000000 x27: ffffff800001b005 [ 4.180167] x26: ffffffc0812f0000 x25: 0000000000000000 x24: 0000000000000000 [ 4.187370] x23: 0000000000000001 x22: 00000000e21eabe9 x21: ffffff8000fa0670 [ 4.194571] x20: ffffff8001b6bf00 x19: ffffff8000fa0430 x18: ffffffc083b95030 [ 4.201773] x17: 0000000000000000 x16: 00000000f0000000 x15: 0000000000000048 [ 4.208976] x14: 0000000000000048 x13: 0000000000000000 x12: 0000000000000001 [ 4.216179] x11: ffffffc08151a240 x10: 0000000000003ea1 x9 : ffffffc08046ab68 [ 4.223381] x8 : ffffffc083cabac0 x7 : ffffffc081df3718 x6 : 0000000000029fc8 [ 4.230583] x5 : ffffffc0817ee6d8 x4 : 0000000000000bc0 x3 : 0000000000000000 [ 4.237784] x2 : 0000000000000000 x1 : 00000000001fffff x0 : 0000000000000000 [ 4.244986] Call trace: [ 4.247463] udma_start.isra.0+0x34/0x238 [ 4.251509] udma_check_tx_completion+0xd0/0xdc [ 4.256076] process_one_work+0x244/0x3fc [ 4.260129] process_scheduled_works+0x6c/0x74 [ 4.264610] worker_thread+0x150/0x1dc [ 4.268398] kthread+0xd8/0xe8 [ 4.271492] ret_from_fork+0x10/0x20 [ 4.275107] irq event stamp: 220 [ 4.278363] hardirqs last enabled at (219): [<ffffffc080a27c7c>] _raw_spin_unlock_irq+0x38/0x50 [ 4.287183] hardirqs last disabled at (220): [<ffffffc080a1c154>] el1_dbg+0x24/0x50 [ 4.294879] softirqs last enabled at (182): [<ffffffc080037e68>] handle_softirqs+0x1c0/0x3cc [ 4.303437] softirqs last disabled at (177): [<ffffffc080010170>] __do_softirq+0x1c/0x28 [ 4.311559] ---[ end trace 0000000000000000 ]--- This commit adds the missing locking. Fixes: 25dcb5dd7b7c ("dmaengine: ti: New driver for K3 UDMA") Cc: Peter Ujfalusi <peter.ujfalusi(a)gmail.com> Cc: Vignesh Raghavendra <vigneshr(a)ti.com> Cc: Vinod Koul <vkoul(a)kernel.org> Cc: dmaengine(a)vger.kernel.org Cc: stable(a)vger.kernel.org Signed-off-by: Ronald Wahl <ronald.wahl(a)legrand.com> --- drivers/dma/ti/k3-udma.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index b3f27b3f9209..b9e497e8134b 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -1091,8 +1091,11 @@ static void udma_check_tx_completion(struct work_struct *work) u32 residue_diff; ktime_t time_diff; unsigned long delay; + unsigned long flags; while (1) { + spin_lock_irqsave(&uc->vc.lock, flags); + if (uc->desc) { /* Get previous residue and time stamp */ residue_diff = uc->tx_drain.residue; @@ -1127,6 +1130,8 @@ static void udma_check_tx_completion(struct work_struct *work) break; } + spin_unlock_irqrestore(&uc->vc.lock, flags); + usleep_range(ktime_to_us(delay), ktime_to_us(delay) + 10); continue; @@ -1143,6 +1148,8 @@ static void udma_check_tx_completion(struct work_struct *work) break; } + + spin_unlock_irqrestore(&uc->vc.lock, flags); } static irqreturn_t udma_ring_irq_handler(int irq, void *data) -- 2.48.0

1 week, 3 days

3
2
0 0

[PATCH] drivers: video: backlight: Fix NULL Pointer Dereference in backlight_device_register()

by Haoyu Li

In the function "wled_probe", the "wled->name" is dynamically allocated (wled_probe -> wled_configure -> devm_kasprintf), which is possible to be null. In the call trace: wled_probe -> devm_backlight_device_register -> backlight_device_register, this "name" variable is directly dereferenced without checking. We add a null-check statement. Fixes: f86b77583d88 ("backlight: pm8941: Convert to using %pOFn instead of device_node.name") Signed-off-by: Haoyu Li <lihaoyu499(a)gmail.com> Cc: stable(a)vger.kernel.org --- drivers/video/backlight/backlight.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c index f699e5827ccb..b21670bd86de 100644 --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -414,6 +414,8 @@ struct backlight_device *backlight_device_register(const char *name, struct backlight_device *new_bd; int rc; + if (!name) + return ERR_PTR(-EINVAL); pr_debug("backlight_device_register: name=%s\n", name); new_bd = kzalloc(sizeof(struct backlight_device), GFP_KERNEL); -- 2.34.1

2 weeks

4
4
0 0

[PATCH v1 1/1] mfd: rk8xx: Fix shutdown handler

by Sebastian Reichel

When I converted rk808 to device managed resources I converted the rk808 specific pm_power_off handler to devm_register_sys_off_handler() using SYS_OFF_MODE_POWER_OFF_PREPARE, which is allowed to sleep. I did this because the driver's poweroff function makes use of regmap and the backend of that might sleep. But the PMIC poweroff function will kill off the board power and the kernel does some extra steps after the prepare handler. Thus the prepare handler should not be used for the PMIC's poweroff routine. Instead the normal SYS_OFF_MODE_POWER_OFF phase should be used. The old pm_power_off method is also being called from there, so this would have been a cleaner conversion anyways. But it still makes sense to investigate the sleep handling and check if there are any issues. Apparently the Rockchip and Meson I2C drivers (the only platforms using the PMICs handled by this driver) both have support for atomic transfers and thus may be called from the proper poweroff context. Things are different on the SPI side. That is so far only used by rk806 and that one is only used by Rockchip RK3588. Unfortunately the Rockchip SPI driver does not support atomic transfers. That means using the normal POWER_OFF handler would introduce the following error splash during shutdown on all RK3588 boards currently supported upstream: [ 13.761353] ------------[ cut here ]------------ [ 13.761764] Voluntary context switch within RCU read-side critical section! [ 13.761776] WARNING: CPU: 0 PID: 1 at kernel/rcu/tree_plugin.h:330 rcu_note_context_switch+0x3ac/0x404 [ 13.763219] Modules linked in: [ 13.763498] CPU: 0 UID: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.10.0-12284-g2818a9a19514 #1499 [ 13.764297] Hardware name: Rockchip RK3588 EVB1 V10 Board (DT) [ 13.764812] pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 13.765427] pc : rcu_note_context_switch+0x3ac/0x404 [ 13.765871] lr : rcu_note_context_switch+0x3ac/0x404 [ 13.766314] sp : ffff800084f4b5b0 [ 13.766609] x29: ffff800084f4b5b0 x28: ffff00040139b800 x27: 00007dfb4439ae80 [ 13.767245] x26: ffff00040139bc80 x25: 0000000000000000 x24: ffff800082118470 [ 13.767880] x23: 0000000000000000 x22: ffff000400300000 x21: ffff000400300000 [ 13.768515] x20: ffff800083a9d600 x19: ffff0004fee48600 x18: fffffffffffed448 [ 13.769151] x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000048 [ 13.769787] x14: fffffffffffed490 x13: ffff80008473b3c0 x12: 0000000000000900 [ 13.770421] x11: 0000000000000300 x10: ffff800084797bc0 x9 : ffff80008473b3c0 [ 13.771057] x8 : 00000000ffffefff x7 : ffff8000847933c0 x6 : 0000000000000300 [ 13.771692] x5 : 0000000000000301 x4 : 40000000fffff300 x3 : 0000000000000000 [ 13.772328] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000400300000 [ 13.772964] Call trace: [ 13.773184] rcu_note_context_switch+0x3ac/0x404 [ 13.773598] __schedule+0x94/0xb0c [ 13.773907] schedule+0x34/0x104 [ 13.774198] schedule_timeout+0x84/0xfc [ 13.774544] wait_for_completion_timeout+0x78/0x14c [ 13.774980] spi_transfer_one_message+0x588/0x690 [ 13.775403] __spi_pump_transfer_message+0x19c/0x4ec [ 13.775846] __spi_sync+0x2a8/0x3c4 [ 13.776161] spi_write_then_read+0x120/0x208 [ 13.776543] rk806_spi_bus_read+0x54/0x88 [ 13.776905] _regmap_raw_read+0xec/0x16c [ 13.777257] _regmap_bus_read+0x44/0x7c [ 13.777601] _regmap_read+0x60/0xd8 [ 13.777915] _regmap_update_bits+0xf4/0x13c [ 13.778289] regmap_update_bits_base+0x64/0x98 [ 13.778686] rk808_power_off+0x70/0xfc [ 13.779024] sys_off_notify+0x40/0x6c [ 13.779356] atomic_notifier_call_chain+0x60/0x90 [ 13.779776] do_kernel_power_off+0x54/0x6c [ 13.780146] machine_power_off+0x18/0x24 [ 13.780499] kernel_power_off+0x70/0x7c [ 13.780845] __do_sys_reboot+0x210/0x270 [ 13.781198] __arm64_sys_reboot+0x24/0x30 [ 13.781558] invoke_syscall+0x48/0x10c [ 13.781897] el0_svc_common+0x3c/0xe8 [ 13.782228] do_el0_svc+0x20/0x2c [ 13.782528] el0_svc+0x34/0xd8 [ 13.782806] el0t_64_sync_handler+0x120/0x12c [ 13.783197] el0t_64_sync+0x190/0x194 [ 13.783527] ---[ end trace 0000000000000000 ]--- To avoid this we keep the SYS_OFF_MODE_POWER_OFF_PREPARE handler for the SPI backend. This is not great, but at least avoids regressions and the fix should be small enough to allow backporting. As a side-effect this also works around a shutdown problem on the Asus C201. For reasons unknown that skips calling the prepare handler and directly calls the final shutdown handler. Fixes: 4fec8a5a85c49 ("mfd: rk808: Convert to device managed resources") Cc: stable(a)vger.kernel.org Reported-by: Urja <urja(a)urja.dev> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.com> --- drivers/mfd/rk8xx-core.c | 15 +++++++++++++-- drivers/mfd/rk8xx-i2c.c | 2 +- drivers/mfd/rk8xx-spi.c | 2 +- include/linux/mfd/rk808.h | 2 +- 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/mfd/rk8xx-core.c b/drivers/mfd/rk8xx-core.c index 5eda3c0dbbdf..757ef8181328 100644 --- a/drivers/mfd/rk8xx-core.c +++ b/drivers/mfd/rk8xx-core.c @@ -692,10 +692,11 @@ void rk8xx_shutdown(struct device *dev) } EXPORT_SYMBOL_GPL(rk8xx_shutdown); -int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap) +int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap, bool is_spi) { struct rk808 *rk808; const struct rk808_reg_data *pre_init_reg; + enum sys_off_mode pwr_off_mode = SYS_OFF_MODE_POWER_OFF; const struct mfd_cell *cells; int dual_support = 0; int nr_pre_init_regs; @@ -785,10 +786,20 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap if (ret) return dev_err_probe(dev, ret, "failed to add MFD devices\n"); + /* + * Currently the Rockchip SPI driver always sleeps when doing SPI + * transfers. This is not allowed in the SYS_OFF_MODE_POWER_OFF + * handler, so we are using the prepare handler as a workaround. + * This should be removed once the Rockchip SPI driver has been + * adapted. + */ + if (is_spi) + pwr_off_mode = SYS_OFF_MODE_POWER_OFF_PREPARE; + if (device_property_read_bool(dev, "rockchip,system-power-controller") || device_property_read_bool(dev, "system-power-controller")) { ret = devm_register_sys_off_handler(dev, - SYS_OFF_MODE_POWER_OFF_PREPARE, SYS_OFF_PRIO_HIGH, + pwr_off_mode, SYS_OFF_PRIO_HIGH, &rk808_power_off, rk808); if (ret) return dev_err_probe(dev, ret, diff --git a/drivers/mfd/rk8xx-i2c.c b/drivers/mfd/rk8xx-i2c.c index 69a6b297d723..a2029decd654 100644 --- a/drivers/mfd/rk8xx-i2c.c +++ b/drivers/mfd/rk8xx-i2c.c @@ -189,7 +189,7 @@ static int rk8xx_i2c_probe(struct i2c_client *client) return dev_err_probe(&client->dev, PTR_ERR(regmap), "regmap initialization failed\n"); - return rk8xx_probe(&client->dev, data->variant, client->irq, regmap); + return rk8xx_probe(&client->dev, data->variant, client->irq, regmap, false); } static void rk8xx_i2c_shutdown(struct i2c_client *client) diff --git a/drivers/mfd/rk8xx-spi.c b/drivers/mfd/rk8xx-spi.c index 3405fb82ff9f..20f9428f94bb 100644 --- a/drivers/mfd/rk8xx-spi.c +++ b/drivers/mfd/rk8xx-spi.c @@ -94,7 +94,7 @@ static int rk8xx_spi_probe(struct spi_device *spi) return dev_err_probe(&spi->dev, PTR_ERR(regmap), "Failed to init regmap\n"); - return rk8xx_probe(&spi->dev, RK806_ID, spi->irq, regmap); + return rk8xx_probe(&spi->dev, RK806_ID, spi->irq, regmap, true); } static const struct of_device_id rk8xx_spi_of_match[] = { diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h index 69cbea78b430..be15b84cff9e 100644 --- a/include/linux/mfd/rk808.h +++ b/include/linux/mfd/rk808.h @@ -1349,7 +1349,7 @@ struct rk808 { }; void rk8xx_shutdown(struct device *dev); -int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap); +int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap *regmap, bool is_spi); int rk8xx_suspend(struct device *dev); int rk8xx_resume(struct device *dev); -- 2.43.0

2 weeks, 4 days

8
12
0 0

[PATCH] drm: Remove redundant statement in drm_crtc_helper_set_mode()

by Huacai Chen

Commit dbbfaf5f2641a ("drm: Remove bridge support from legacy helpers") removes the drm_bridge_mode_fixup() call in drm_crtc_helper_set_mode(), which makes the subsequent "encoder_funcs = encoder->helper_private" be redundant, so remove it. Cc: stable(a)vger.kernel.org Fixes: dbbfaf5f2641a ("drm: Remove bridge support from legacy helpers") Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> --- drivers/gpu/drm/drm_crtc_helper.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 0955f1c385dd..39497493f74c 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -334,7 +334,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (!encoder_funcs) continue; - encoder_funcs = encoder->helper_private; if (encoder_funcs->mode_fixup) { if (!(ret = encoder_funcs->mode_fixup(encoder, mode, adjusted_mode))) { -- 2.43.5

2 weeks, 5 days

3
5
0 0

[PATCH v4] usb: xhci: quirk for data loss in ISOC transfers

by Raju Rangoju

During the High-Speed Isochronous Audio transfers, xHCI controller on certain AMD platforms experiences momentary data loss. This results in Missed Service Errors (MSE) being generated by the xHCI. The root cause of the MSE is attributed to the ISOC OUT endpoint being omitted from scheduling. This can happen either when an IN endpoint with a 64ms service interval is pre-scheduled prior to the ISOC OUT endpoint or when the interval of the ISOC OUT endpoint is shorter than that of the IN endpoint. Consequently, the OUT service is neglected when an IN endpoint with a service interval exceeding 32ms is scheduled concurrently (every 64ms in this scenario). This issue is particularly seen on certain older AMD platforms. To mitigate this problem, it is recommended to adjust the service interval of the IN endpoint to not exceed 32ms (interval 8). This adjustment ensures that the OUT endpoint will not be bypassed, even if a smaller interval value is utilized. Cc: stable(a)vger.kernel.org Signed-off-by: Raju Rangoju <Raju.Rangoju(a)amd.com> --- Changes since v3: - Bump up the enum number XHCI_LIMIT_ENDPOINT_INTERVAL_9 Changes since v2: - added stable tag to backport to all stable kernels Changes since v1: - replaced hex values with pci device names - corrected the commit message drivers/usb/host/xhci-mem.c | 5 +++++ drivers/usb/host/xhci-pci.c | 25 +++++++++++++++++++++++++ drivers/usb/host/xhci.h | 1 + 3 files changed, 31 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 92703efda1f7..d3182ba98788 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1420,6 +1420,11 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Periodic endpoint bInterval limit quirk */ if (usb_endpoint_xfer_int(&ep->desc) || usb_endpoint_xfer_isoc(&ep->desc)) { + if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_9) && + usb_endpoint_xfer_int(&ep->desc) && + interval >= 9) { + interval = 8; + } if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) && udev->speed >= USB_SPEED_HIGH && interval >= 7) { diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 2d1e205c14c6..d23884afdf3f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -69,12 +69,22 @@ #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0 +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI 0x13ed +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI 0x13ee +#define PCI_DEVICE_ID_AMD_STARSHIP_XHCI 0x148c +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI 0x15d4 +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI 0x15d5 +#define PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI 0x15e0 +#define PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI 0x15e1 +#define PCI_DEVICE_ID_AMD_RAVEN2_XHCI 0x15e5 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc +#define PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI 0x7316 + #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242 @@ -278,6 +288,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_STARSHIP_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN2_XHCI)) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + + if (pdev->vendor == PCI_VENDOR_ID_ATI && + pdev->device == PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 4914f0a10cff..36b77d3c0e7b 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1633,6 +1633,7 @@ struct xhci_hcd { #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) #define XHCI_ETRON_HOST BIT_ULL(49) +#define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50) unsigned int num_active_eps; unsigned int limit_active_eps; -- 2.34.1

2 weeks, 5 days

4
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2025