September 2024 - Linux-stable-mirror

[PATCH 3/3] xhci: Don't perform Soft Retry for Etron xHCI host

by Kuangyi Chiang

Since commit f8f80be501aa ("xhci: Use soft retry to recover faster from transaction errors"), unplugging USB device while enumeration results in errors like this: [ 364.855321] xhci_hcd 0000:0b:00.0: ERROR Transfer event for disabled endpoint slot 5 ep 2 [ 364.864622] xhci_hcd 0000:0b:00.0: @0000002167656d70 67f03000 00000021 0c000000 05038001 [ 374.934793] xhci_hcd 0000:0b:00.0: Abort failed to stop command ring: -110 [ 374.958793] xhci_hcd 0000:0b:00.0: xHCI host controller not responding, assume dead [ 374.967590] xhci_hcd 0000:0b:00.0: HC died; cleaning up [ 374.973984] xhci_hcd 0000:0b:00.0: Timeout while waiting for configure endpoint command Seems that Etorn xHCI host can not perform Soft Retry correctly, apply XHCI_NO_SOFT_RETRY quirk to disable Soft Retry and then issue is gone. This patch depends on commit a4a251f8c235 ("usb: xhci: do not perform Soft Retry for some xHCI hosts"). Fixes: f8f80be501aa ("xhci: Use soft retry to recover faster from transaction errors") Cc: <stable(a)vger.kernel.org> Signed-off-by: Kuangyi Chiang <ki.chiang65(a)gmail.com> --- drivers/usb/host/xhci-pci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index dda873f3fee7..19f120ed8dd3 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -399,6 +399,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_BROKEN_STREAMS; xhci->quirks |= XHCI_NO_RESET_DEVICE; xhci->quirks |= XHCI_NO_BREAK_CTRL_TD; + xhci->quirks |= XHCI_NO_SOFT_RETRY; } if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_EJ188) { @@ -406,6 +407,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_BROKEN_STREAMS; xhci->quirks |= XHCI_NO_RESET_DEVICE; xhci->quirks |= XHCI_NO_BREAK_CTRL_TD; + xhci->quirks |= XHCI_NO_SOFT_RETRY; } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && -- 2.25.1

8 months

3
7
0 0

[PATCH V6] scsi: ufs: qcom: update MODE_MAX cfg_bw value

by Manish Pandey

Commit 8db8f6ce556a ("scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5") updated the ufs_qcom_bw_table for Gear 5. However, it missed updating the cfg_bw value for the max mode. Hence update the cfg_bw value for the max mode for UFS 4.x devices. Fixes: 8db8f6ce556a ("scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5") Cc: stable(a)vger.kernel.org Signed-off-by: Manish Pandey <quic_mapa(a)quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam(a)linaro.org> --- Changes from v5: - Updated commit message. - Added Reviewed-by tag. Changes from v4: - Updated commit message. Changes from v3: - Cced stable(a)vger.kernel.org. Changes from v2: - Addressed Mani comment, added fixes tag. Changes from v1: - Updated commit message. --- drivers/ufs/host/ufs-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index c87fdc849c62..ecdfff2456e3 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -93,7 +93,7 @@ static const struct __ufs_qcom_bw_table { [MODE_HS_RB][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 }, [MODE_HS_RB][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 }, [MODE_HS_RB][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 }, - [MODE_MAX][0][0] = { 7643136, 307200 }, + [MODE_MAX][0][0] = { 7643136, 819200 }, }; static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host); -- 2.17.1

8 months

2
1
0 0

[PATCHv2 net] usbnet: fix cyclical race on disconnect with work queue

by Oliver Neukum

The work can submit URBs and the URBs can schedule the work. This cycle needs to be broken, when a device is to be stopped. Use a flag to do so. This is a design issue as old as the driver. Signed-off-by: Oliver Neukum <oneukum(a)suse.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") CC: stable(a)vger.kernel.org --- v2: fix PM reference issue drivers/net/usb/usbnet.c | 37 ++++++++++++++++++++++++++++--------- include/linux/usb/usbnet.h | 17 +++++++++++++++++ 2 files changed, 45 insertions(+), 9 deletions(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 18eb5ba436df..2506aa8c603e 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -464,10 +464,15 @@ static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb, void usbnet_defer_kevent (struct usbnet *dev, int work) { set_bit (work, &dev->flags); - if (!schedule_work (&dev->kevent)) - netdev_dbg(dev->net, "kevent %s may have been dropped\n", usbnet_event_names[work]); - else - netdev_dbg(dev->net, "kevent %s scheduled\n", usbnet_event_names[work]); + if (!usbnet_going_away(dev)) { + if (!schedule_work(&dev->kevent)) + netdev_dbg(dev->net, + "kevent %s may have been dropped\n", + usbnet_event_names[work]); + else + netdev_dbg(dev->net, + "kevent %s scheduled\n", usbnet_event_names[work]); + } } EXPORT_SYMBOL_GPL(usbnet_defer_kevent); @@ -535,7 +540,8 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) tasklet_schedule (&dev->bh); break; case 0: - __usbnet_queue_skb(&dev->rxq, skb, rx_start); + if (!usbnet_going_away(dev)) + __usbnet_queue_skb(&dev->rxq, skb, rx_start); } } else { netif_dbg(dev, ifdown, dev->net, "rx: stopped\n"); @@ -843,9 +849,18 @@ int usbnet_stop (struct net_device *net) /* deferred work (timer, softirq, task) must also stop */ dev->flags = 0; - del_timer_sync (&dev->delay); - tasklet_kill (&dev->bh); + del_timer_sync(&dev->delay); + tasklet_kill(&dev->bh); cancel_work_sync(&dev->kevent); + + /* We have cyclic dependencies. Those calls are needed + * to break a cycle. We cannot fall into the gaps because + * we have a flag + */ + tasklet_kill(&dev->bh); + del_timer_sync(&dev->delay); + cancel_work_sync(&dev->kevent); + if (!pm) usb_autopm_put_interface(dev->intf); @@ -1171,7 +1186,8 @@ usbnet_deferred_kevent (struct work_struct *work) status); } else { clear_bit (EVENT_RX_HALT, &dev->flags); - tasklet_schedule (&dev->bh); + if (!usbnet_going_away(dev)) + tasklet_schedule(&dev->bh); } } @@ -1196,7 +1212,8 @@ usbnet_deferred_kevent (struct work_struct *work) usb_autopm_put_interface(dev->intf); fail_lowmem: if (resched) - tasklet_schedule (&dev->bh); + if (!usbnet_going_away(dev)) + tasklet_schedule(&dev->bh); } } @@ -1559,6 +1576,7 @@ static void usbnet_bh (struct timer_list *t) } else if (netif_running (dev->net) && netif_device_present (dev->net) && netif_carrier_ok(dev->net) && + !usbnet_going_away(dev) && !timer_pending(&dev->delay) && !test_bit(EVENT_RX_PAUSED, &dev->flags) && !test_bit(EVENT_RX_HALT, &dev->flags)) { @@ -1606,6 +1624,7 @@ void usbnet_disconnect (struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (!dev) return; + usbnet_mark_going_away(dev); xdev = interface_to_usbdev (intf); diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 9f08a584d707..d02d6f16da46 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -76,8 +76,25 @@ struct usbnet { # define EVENT_LINK_CHANGE 11 # define EVENT_SET_RX_MODE 12 # define EVENT_NO_IP_ALIGN 13 +/* This one is special, as it indicates that the device is going away + * there are cyclic dependencies between tasklet, timer and bh + * that must be broken + */ +# define EVENT_UNPLUG 31 }; +static inline bool usbnet_going_away(struct usbnet *ubn) +{ + smp_mb__before_atomic(); /* against usbnet_mark_going_away() */ + return test_bit(EVENT_UNPLUG, &ubn->flags); +} + +static inline void usbnet_mark_going_away(struct usbnet *ubn) +{ + set_bit(EVENT_UNPLUG, &ubn->flags); + smp_mb__after_atomic(); /* against usbnet_going_away() */ +} + static inline struct usb_driver *driver_of(struct usb_interface *intf) { return to_usb_driver(intf->dev.driver); -- 2.45.2

8 months

3
5
0 0

[PATCH 3/8] lpfc: Restrict support for 32 byte CDBs to specific HBAs

by Justin Tee

An older generation of HBAs are failing FCP discovery due to usage of an outdated field in FCP command WQEs. Fix by checking the SLI Interface Type register for applicable support of 32 Byte CDB commands, and restore a setting for a WQE path using normal 16 byte CDBs. Fixes: af20bb73ac25 ("scsi: lpfc: Add support for 32 byte CDBs") Cc: <stable(a)vger.kernel.org> # v6.10+ Signed-off-by: Justin Tee <justin.tee(a)broadcom.com> --- drivers/scsi/lpfc/lpfc_hw4.h | 3 +++ drivers/scsi/lpfc/lpfc_init.c | 21 ++++++++++++++++++--- drivers/scsi/lpfc/lpfc_scsi.c | 2 +- 3 files changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 500253007b1d..26e1313ebb21 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -4847,6 +4847,7 @@ struct fcp_iwrite64_wqe { #define cmd_buff_len_SHIFT 16 #define cmd_buff_len_MASK 0x00000ffff #define cmd_buff_len_WORD word3 +/* Note: payload_offset_len field depends on ASIC support */ #define payload_offset_len_SHIFT 0 #define payload_offset_len_MASK 0x0000ffff #define payload_offset_len_WORD word3 @@ -4863,6 +4864,7 @@ struct fcp_iread64_wqe { #define cmd_buff_len_SHIFT 16 #define cmd_buff_len_MASK 0x00000ffff #define cmd_buff_len_WORD word3 +/* Note: payload_offset_len field depends on ASIC support */ #define payload_offset_len_SHIFT 0 #define payload_offset_len_MASK 0x0000ffff #define payload_offset_len_WORD word3 @@ -4879,6 +4881,7 @@ struct fcp_icmnd64_wqe { #define cmd_buff_len_SHIFT 16 #define cmd_buff_len_MASK 0x00000ffff #define cmd_buff_len_WORD word3 +/* Note: payload_offset_len field depends on ASIC support */ #define payload_offset_len_SHIFT 0 #define payload_offset_len_MASK 0x0000ffff #define payload_offset_len_WORD word3 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e1dfa96c2a55..0c1404dc5f3b 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4699,6 +4699,7 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) uint64_t wwn; bool use_no_reset_hba = false; int rc; + u8 if_type; if (lpfc_no_hba_reset_cnt) { if (phba->sli_rev < LPFC_SLI_REV4 && @@ -4773,10 +4774,24 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev) shost->max_id = LPFC_MAX_TARGET; shost->max_lun = vport->cfg_max_luns; shost->this_id = -1; - if (phba->sli_rev == LPFC_SLI_REV4) - shost->max_cmd_len = LPFC_FCP_CDB_LEN_32; - else + + /* Set max_cmd_len applicable to ASIC support */ + if (phba->sli_rev == LPFC_SLI_REV4) { + if_type = bf_get(lpfc_sli_intf_if_type, + &phba->sli4_hba.sli_intf); + switch (if_type) { + case LPFC_SLI_INTF_IF_TYPE_2: + fallthrough; + case LPFC_SLI_INTF_IF_TYPE_6: + shost->max_cmd_len = LPFC_FCP_CDB_LEN_32; + break; + default: + shost->max_cmd_len = LPFC_FCP_CDB_LEN; + break; + } + } else { shost->max_cmd_len = LPFC_FCP_CDB_LEN; + } if (phba->sli_rev == LPFC_SLI_REV4) { if (!phba->cfg_fcp_mq_threshold || diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 60cd60ebff38..0eaede8275da 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -4760,7 +4760,7 @@ static int lpfc_scsi_prep_cmnd_buf_s4(struct lpfc_vport *vport, /* Word 3 */ bf_set(payload_offset_len, &wqe->fcp_icmd, - sizeof(struct fcp_cmnd32) + sizeof(struct fcp_rsp)); + sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp)); /* Word 6 */ bf_set(wqe_ctxt_tag, &wqe->generic.wqe_com, -- 2.38.0

8 months

1
0
0 0

[PATCH 6.6 v2 3/4] riscv: dts: starfive: Add the nodes and pins of I2Srx/I2Stx0/I2Stx1

by WangYuli

From: Xingyu Wu <xingyu.wu(a)starfivetech.com> [ Upstream commit 92cfc35838b2a4006abb9e3bafc291b56f135d01 ] Add I2Srx/I2Stx0/I2Stx1 nodes and pins configuration for the StarFive JH7110 SoC. Signed-off-by: Xingyu Wu <xingyu.wu(a)starfivetech.com> Reviewed-by: Walker Chen <walker.chen(a)starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley(a)microchip.com> Signed-off-by: WangYuli <wangyuli(a)uniontech.com> --- .../jh7110-starfive-visionfive-2.dtsi | 58 +++++++++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 65 +++++++++++++++++++ 2 files changed, 123 insertions(+) diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 4874e3bb42ab..caa59b9b2f19 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -202,6 +202,24 @@ &i2c6 { status = "okay"; }; +&i2srx { + pinctrl-names = "default"; + pinctrl-0 = <&i2srx_pins>; + status = "okay"; +}; + +&i2stx0 { + pinctrl-names = "default"; + pinctrl-0 = <&mclk_ext_pins>; + status = "okay"; +}; + +&i2stx1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2stx1_pins>; + status = "okay"; +}; + &mmc0 { max-frequency = <100000000>; assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; @@ -340,6 +358,46 @@ GPOEN_SYS_I2C6_DATA, }; }; + i2srx_pins: i2srx-0 { + clk-sd-pins { + pinmux = <GPIOMUX(38, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2SRX_BCLK)>, + <GPIOMUX(63, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2SRX_LRCK)>, + <GPIOMUX(38, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2STX1_BCLK)>, + <GPIOMUX(63, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2STX1_LRCK)>, + <GPIOMUX(61, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2SRX_SDIN0)>; + input-enable; + }; + }; + + i2stx1_pins: i2stx1-0 { + sd-pins { + pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + }; + }; + + mclk_ext_pins: mclk-ext-0 { + mclk-ext-pins { + pinmux = <GPIOMUX(4, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_MCLK_EXT)>; + input-enable; + }; + }; + mmc0_pins: mmc0-0 { rst-pins { pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index e85464c328d0..621b68c02ea8 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -512,6 +512,30 @@ tdm: tdm@10090000 { status = "disabled"; }; + i2srx: i2s@100e0000 { + compatible = "starfive,jh7110-i2srx"; + reg = <0x0 0x100e0000 0x0 0x1000>; + clocks = <&syscrg JH7110_SYSCLK_I2SRX_BCLK_MST>, + <&syscrg JH7110_SYSCLK_I2SRX_APB>, + <&syscrg JH7110_SYSCLK_MCLK>, + <&syscrg JH7110_SYSCLK_MCLK_INNER>, + <&mclk_ext>, + <&syscrg JH7110_SYSCLK_I2SRX_BCLK>, + <&syscrg JH7110_SYSCLK_I2SRX_LRCK>, + <&i2srx_bclk_ext>, + <&i2srx_lrck_ext>; + clock-names = "i2sclk", "apb", "mclk", + "mclk_inner", "mclk_ext", "bclk", + "lrck", "bclk_ext", "lrck_ext"; + resets = <&syscrg JH7110_SYSRST_I2SRX_APB>, + <&syscrg JH7110_SYSRST_I2SRX_BCLK>; + dmas = <0>, <&dma 24>; + dma-names = "tx", "rx"; + starfive,syscon = <&sys_syscon 0x18 0x2>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + usb0: usb@10100000 { compatible = "starfive,jh7110-usb"; ranges = <0x0 0x0 0x10100000 0x100000>; @@ -736,6 +760,47 @@ spi6: spi@120a0000 { status = "disabled"; }; + i2stx0: i2s@120b0000 { + compatible = "starfive,jh7110-i2stx0"; + reg = <0x0 0x120b0000 0x0 0x1000>; + clocks = <&syscrg JH7110_SYSCLK_I2STX0_BCLK_MST>, + <&syscrg JH7110_SYSCLK_I2STX0_APB>, + <&syscrg JH7110_SYSCLK_MCLK>, + <&syscrg JH7110_SYSCLK_MCLK_INNER>, + <&mclk_ext>; + clock-names = "i2sclk", "apb", "mclk", + "mclk_inner","mclk_ext"; + resets = <&syscrg JH7110_SYSRST_I2STX0_APB>, + <&syscrg JH7110_SYSRST_I2STX0_BCLK>; + dmas = <&dma 47>; + dma-names = "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2stx1: i2s@120c0000 { + compatible = "starfive,jh7110-i2stx1"; + reg = <0x0 0x120c0000 0x0 0x1000>; + clocks = <&syscrg JH7110_SYSCLK_I2STX1_BCLK_MST>, + <&syscrg JH7110_SYSCLK_I2STX1_APB>, + <&syscrg JH7110_SYSCLK_MCLK>, + <&syscrg JH7110_SYSCLK_MCLK_INNER>, + <&mclk_ext>, + <&syscrg JH7110_SYSCLK_I2STX1_BCLK>, + <&syscrg JH7110_SYSCLK_I2STX1_LRCK>, + <&i2stx_bclk_ext>, + <&i2stx_lrck_ext>; + clock-names = "i2sclk", "apb", "mclk", + "mclk_inner", "mclk_ext", "bclk", + "lrck", "bclk_ext", "lrck_ext"; + resets = <&syscrg JH7110_SYSRST_I2STX1_APB>, + <&syscrg JH7110_SYSRST_I2STX1_BCLK>; + dmas = <&dma 48>; + dma-names = "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + sfctemp: temperature-sensor@120e0000 { compatible = "starfive,jh7110-temp"; reg = <0x0 0x120e0000 0x0 0x10000>; -- 2.43.4

8 months

4
4
0 0

[PATCH 6.1] fs/ntfs3: Use kvfree to free memory allocated by kvmalloc

by Andrey Kalachev

Missed master:ddb17dc880ee backport cause 'kernel BUG in __phys_addr (2)' on 6.1.y. introduced by: 6.1.y:6fe32f79abea fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN) Link: https://syzkaller.appspot.com/bug?extid=3c339e6f719df0a7faac ------------------ From: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> Date: Tue, 16 Jan 2024 10:32:20 +0300 [ Upstream commit ddb17dc880eeaac37b5a6e984de07b882de7d78d ] Signed-off-by: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> Signed-off-by: Andrey Kalachev <kalachev(a)swemel.ru> --- fs/ntfs3/attrlist.c | 4 ++-- fs/ntfs3/bitmap.c | 4 ++-- fs/ntfs3/frecord.c | 4 ++-- fs/ntfs3/super.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/ntfs3/attrlist.c b/fs/ntfs3/attrlist.c index 723e49ec83ce..82bd9b5d9bd8 100644 --- a/fs/ntfs3/attrlist.c +++ b/fs/ntfs3/attrlist.c @@ -29,7 +29,7 @@ static inline bool al_is_valid_le(const struct ntfs_inode *ni, void al_destroy(struct ntfs_inode *ni) { run_close(&ni->attr_list.run); - kfree(ni->attr_list.le); + kvfree(ni->attr_list.le); ni->attr_list.le = NULL; ni->attr_list.size = 0; ni->attr_list.dirty = false; @@ -318,7 +318,7 @@ int al_add_le(struct ntfs_inode *ni, enum ATTR_TYPE type, const __le16 *name, memcpy(ptr, al->le, off); memcpy(Add2Ptr(ptr, off + sz), le, old_size - off); le = Add2Ptr(ptr, off); - kfree(al->le); + kvfree(al->le); al->le = ptr; } else { memmove(Add2Ptr(le, sz), le, old_size - off); diff --git a/fs/ntfs3/bitmap.c b/fs/ntfs3/bitmap.c index 70d9d08fc61b..8dbd8e70c295 100644 --- a/fs/ntfs3/bitmap.c +++ b/fs/ntfs3/bitmap.c @@ -124,7 +124,7 @@ void wnd_close(struct wnd_bitmap *wnd) { struct rb_node *node, *next; - kfree(wnd->free_bits); + kvfree(wnd->free_bits); run_close(&wnd->run); node = rb_first(&wnd->start_tree); @@ -1333,7 +1333,7 @@ int wnd_extend(struct wnd_bitmap *wnd, size_t new_bits) memcpy(new_free, wnd->free_bits, wnd->nwnd * sizeof(short)); memset(new_free + wnd->nwnd, 0, (new_wnd - wnd->nwnd) * sizeof(short)); - kfree(wnd->free_bits); + kvfree(wnd->free_bits); wnd->free_bits = new_free; } diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 6cce71cc750e..b460d1da9440 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -773,7 +773,7 @@ static int ni_try_remove_attr_list(struct ntfs_inode *ni) run_deallocate(sbi, &ni->attr_list.run, true); run_close(&ni->attr_list.run); ni->attr_list.size = 0; - kfree(ni->attr_list.le); + kvfree(ni->attr_list.le); ni->attr_list.le = NULL; ni->attr_list.dirty = false; @@ -924,7 +924,7 @@ int ni_create_attr_list(struct ntfs_inode *ni) goto out; out1: - kfree(ni->attr_list.le); + kvfree(ni->attr_list.le); ni->attr_list.le = NULL; ni->attr_list.size = 0; return err; diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 667ff92f5afc..eee54214f4a3 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -441,7 +441,7 @@ static noinline void put_ntfs(struct ntfs_sb_info *sbi) { kfree(sbi->new_rec); kvfree(ntfs_put_shared(sbi->upcase)); - kfree(sbi->def_table); + kvfree(sbi->def_table); wnd_close(&sbi->mft.bitmap); wnd_close(&sbi->used.bitmap); -- 2.30.2 To: Cc: Bcc: Subject: Reply-To:

8 months

1
0
0 0

[PATCH 5.15] fs/ntfs3: Use kvfree to free memory allocated by kvmalloc

by Andrey Kalachev

Missed master:ddb17dc880ee backport cause 'kernel BUG in __phys_addr' on 5.15.y. introduced by: 5.15.y:962a3d3d731c (fs/ntfs3: Use kvmalloc instead of kmalloc(... __GFP_NOWARN)) Link: https://syzkaller.appspot.com/bug?extid=2c00ffdada0b04c96497 ------------------ From: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> Date: Tue, 16 Jan 2024 10:32:20 +0300 Subject: [PATCH] fs/ntfs3: Use kvfree to free memory allocated by kvmalloc [ Upstream commit ddb17dc880eeaac37b5a6e984de07b882de7d78d ] Signed-off-by: Konstantin Komarov <almaz.alexandrovich(a)paragon-software.com> Signed-off-by: Andrey Kalachev <kalachev(a)swemel.ru> --- fs/ntfs3/attrlist.c | 4 ++-- fs/ntfs3/bitmap.c | 4 ++-- fs/ntfs3/frecord.c | 4 ++-- fs/ntfs3/super.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/ntfs3/attrlist.c b/fs/ntfs3/attrlist.c index 723e49ec83ce..82bd9b5d9bd8 100644 --- a/fs/ntfs3/attrlist.c +++ b/fs/ntfs3/attrlist.c @@ -29,7 +29,7 @@ static inline bool al_is_valid_le(const struct ntfs_inode *ni, void al_destroy(struct ntfs_inode *ni) { run_close(&ni->attr_list.run); - kfree(ni->attr_list.le); + kvfree(ni->attr_list.le); ni->attr_list.le = NULL; ni->attr_list.size = 0; ni->attr_list.dirty = false; @@ -318,7 +318,7 @@ int al_add_le(struct ntfs_inode *ni, enum ATTR_TYPE type, const __le16 *name, memcpy(ptr, al->le, off); memcpy(Add2Ptr(ptr, off + sz), le, old_size - off); le = Add2Ptr(ptr, off); - kfree(al->le); + kvfree(al->le); al->le = ptr; } else { memmove(Add2Ptr(le, sz), le, old_size - off); diff --git a/fs/ntfs3/bitmap.c b/fs/ntfs3/bitmap.c index 7dccff6c9983..2c29a3b386ba 100644 --- a/fs/ntfs3/bitmap.c +++ b/fs/ntfs3/bitmap.c @@ -129,7 +129,7 @@ void wnd_close(struct wnd_bitmap *wnd) { struct rb_node *node, *next; - kfree(wnd->free_bits); + kvfree(wnd->free_bits); run_close(&wnd->run); node = rb_first(&wnd->start_tree); @@ -1340,7 +1340,7 @@ int wnd_extend(struct wnd_bitmap *wnd, size_t new_bits) wnd->nwnd * sizeof(short)); memset(new_free + wnd->nwnd, 0, (new_wnd - wnd->nwnd) * sizeof(short)); - kfree(wnd->free_bits); + kvfree(wnd->free_bits); wnd->free_bits = new_free; } diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index da21a044d3f8..7a1f57dc58df 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -750,7 +750,7 @@ static int ni_try_remove_attr_list(struct ntfs_inode *ni) run_deallocate(sbi, &ni->attr_list.run, true); run_close(&ni->attr_list.run); ni->attr_list.size = 0; - kfree(ni->attr_list.le); + kvfree(ni->attr_list.le); ni->attr_list.le = NULL; ni->attr_list.dirty = false; @@ -899,7 +899,7 @@ int ni_create_attr_list(struct ntfs_inode *ni) goto out; out1: - kfree(ni->attr_list.le); + kvfree(ni->attr_list.le); ni->attr_list.le = NULL; ni->attr_list.size = 0; return err; diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 2ce26062e55e..78b086527331 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -441,7 +441,7 @@ static noinline void put_ntfs(struct ntfs_sb_info *sbi) { kfree(sbi->new_rec); kvfree(ntfs_put_shared(sbi->upcase)); - kfree(sbi->def_table); + kvfree(sbi->def_table); wnd_close(&sbi->mft.bitmap); wnd_close(&sbi->used.bitmap); -- 2.30.2

8 months

1
0
0 0

[PATCH v2] clocksource: hyper-v: Fix hv tsc page based sched_clock for hibernation

by Naman Jain

read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is bigger than the variable hv_sched_clock_offset, which is cached during early boot, but depending on the timing this assumption may be false when a hibernated VM starts again (the clock counter starts from 0 again) and is resuming back (Note: hv_init_tsc_clocksource() is not called during hibernation/resume); consequently, read_hv_sched_clock_tsc() may return a negative integer (which is interpreted as a huge positive integer since the return type is u64) and new kernel messages are prefixed with huge timestamps before read_hv_sched_clock_tsc() grows big enough (which typically takes several seconds). Fix the issue by saving the Hyper-V clock counter just before the suspend, and using it to correct the hv_sched_clock_offset in resume. Override x86_platform.save_sched_clock_state and x86_platform.restore_sched_clock_state. Note: if Invariant TSC is available, the issue doesn't happen because 1) we don't register read_hv_sched_clock_tsc() for sched clock: See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework clocksource and sched clock setup"); 2) the common x86 code adjusts TSC similarly: see __restore_processor_state() -> tsc_verify_tsc_adjust(true) and x86_platform.restore_sched_clock_state(). Cc: stable(a)vger.kernel.org Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation") Co-developed-by: Dexuan Cui <decui(a)microsoft.com> Signed-off-by: Dexuan Cui <decui(a)microsoft.com> Signed-off-by: Naman Jain <namjain(a)linux.microsoft.com> --- Changes from v1: https://lore.kernel.org/all/20240909053923.8512-1-namjain@linux.microsoft.c… * Reorganized code as per Michael's comment, and moved the logic to x86 specific files, to keep hyperv_timer.c arch independent. --- arch/x86/kernel/cpu/mshyperv.c | 70 ++++++++++++++++++++++++++++++ drivers/clocksource/hyperv_timer.c | 8 +++- include/clocksource/hyperv_timer.h | 8 ++++ 3 files changed, 85 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c index e0fd57a8ba84..d83a694e387c 100644 --- a/arch/x86/kernel/cpu/mshyperv.c +++ b/arch/x86/kernel/cpu/mshyperv.c @@ -224,6 +224,75 @@ static void hv_machine_crash_shutdown(struct pt_regs *regs) hyperv_cleanup(); } #endif /* CONFIG_CRASH_DUMP */ + +static u64 hv_sched_clock_offset_saved; +static void (*old_save_sched_clock_state)(void); +static void (*old_restore_sched_clock_state)(void); + +/* + * Hyper-V clock counter resets during hibernation. Save and restore clock + * offset during suspend/resume, while also considering the time passed + * before suspend. This is to make sure that sched_clock using hv tsc page + * based clocksource, proceeds from where it left off during suspend and + * it shows correct time for the timestamps of kernel messages after resume. + */ +static void save_hv_clock_tsc_state(void) +{ + hv_sched_clock_offset_saved = hv_read_reference_counter(); +} + +static void restore_hv_clock_tsc_state(void) +{ + /* + * hv_sched_clock_offset = offset that is used by hyperv_timer clocksource driver + * to get time. + * Time passed before suspend = hv_sched_clock_offset_saved + * - hv_sched_clock_offset (old) + * + * After Hyper-V clock counter resets, hv_sched_clock_offset needs a correction. + * + * New time = hv_read_reference_counter() (future) - hv_sched_clock_offset (new) + * New time = Time passed before suspend + hv_read_reference_counter() (future) + * - hv_read_reference_counter() (now) + * + * Solving the above two equations gives: + * + * hv_sched_clock_offset (new) = hv_sched_clock_offset (old) + * - hv_sched_clock_offset_saved + * + hv_read_reference_counter() (now)) + */ + hv_adj_sched_clock_offset(hv_sched_clock_offset_saved - hv_read_reference_counter()); +} + +/* + * Functions to override save_sched_clock_state and restore_sched_clock_state + * functions of x86_platform. The Hyper-V clock counter is reset during + * suspend-resume and the offset used to measure time needs to be + * corrected, post resume. + */ +static void hv_save_sched_clock_state(void) +{ + old_save_sched_clock_state(); + save_hv_clock_tsc_state(); +} + +static void hv_restore_sched_clock_state(void) +{ + restore_hv_clock_tsc_state(); + old_restore_sched_clock_state(); +} + +static void __init x86_setup_ops_for_tsc_pg_clock(void) +{ + if (!(ms_hyperv.features & HV_MSR_REFERENCE_TSC_AVAILABLE)) + return; + + old_save_sched_clock_state = x86_platform.save_sched_clock_state; + x86_platform.save_sched_clock_state = hv_save_sched_clock_state; + + old_restore_sched_clock_state = x86_platform.restore_sched_clock_state; + x86_platform.restore_sched_clock_state = hv_restore_sched_clock_state; +} #endif /* CONFIG_HYPERV */ static uint32_t __init ms_hyperv_platform(void) @@ -575,6 +644,7 @@ static void __init ms_hyperv_init_platform(void) /* Register Hyper-V specific clocksource */ hv_init_clocksource(); + x86_setup_ops_for_tsc_pg_clock(); hv_vtl_init_platform(); #endif /* diff --git a/drivers/clocksource/hyperv_timer.c b/drivers/clocksource/hyperv_timer.c index b2a080647e41..e424892444ed 100644 --- a/drivers/clocksource/hyperv_timer.c +++ b/drivers/clocksource/hyperv_timer.c @@ -27,7 +27,8 @@ #include <asm/mshyperv.h> static struct clock_event_device __percpu *hv_clock_event; -static u64 hv_sched_clock_offset __ro_after_init; +/* Note: offset can hold negative values after hibernation. */ +static u64 hv_sched_clock_offset __read_mostly; /* * If false, we're using the old mechanism for stimer0 interrupts @@ -456,6 +457,11 @@ static void resume_hv_clock_tsc(struct clocksource *arg) hv_set_msr(HV_MSR_REFERENCE_TSC, tsc_msr.as_uint64); } +void hv_adj_sched_clock_offset(u64 offset) +{ + hv_sched_clock_offset -= offset; +} + #ifdef HAVE_VDSO_CLOCKMODE_HVCLOCK static int hv_cs_enable(struct clocksource *cs) { diff --git a/include/clocksource/hyperv_timer.h b/include/clocksource/hyperv_timer.h index 6cdc873ac907..62e2bad754c0 100644 --- a/include/clocksource/hyperv_timer.h +++ b/include/clocksource/hyperv_timer.h @@ -38,6 +38,14 @@ extern void hv_remap_tsc_clocksource(void); extern unsigned long hv_get_tsc_pfn(void); extern struct ms_hyperv_tsc_page *hv_get_tsc_page(void); +/* + * Called during resume from hibernation, from overridden + * x86_platform.restore_sched_clock_state routine. This is to adjust offsets + * used to calculate time for hv tsc page based sched_clock, to account for + * time spent before hibernation. + */ +extern void hv_adj_sched_clock_offset(u64 offset); + static __always_inline bool hv_read_tsc_page_tsc(const struct ms_hyperv_tsc_page *tsc_pg, u64 *cur_tsc, u64 *time) base-commit: da3ea35007d0af457a0afc87e84fddaebc4e0b63 -- 2.25.1

8 months

2
4
0 0

[PATCH net v2] net: tighten bad gso csum offset check in virtio_net_hdr

by Willem de Bruijn

From: Willem de Bruijn <willemb(a)google.com> The referenced commit drops bad input, but has false positives. Tighten the check to avoid these. The check detects illegal checksum offload requests, which produce csum_start/csum_off beyond end of packet after segmentation. But it is based on two incorrect assumptions: 1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO. True in callers that inject into the tx path, such as tap. But false in callers that inject into rx, like virtio-net. Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal. 2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL. False, as tcp[46]_gso_segment will fix up csum_start and offset for all other ip_summed by calling __tcp_v4_send_check. Because of 2, we can limit the scope of the fix to virtio_net_hdr that do try to set these fields, with a bogus value. Link: https://lore.kernel.org/netdev/20240909094527.GA3048202@port70.net/ Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr") Signed-off-by: Willem de Bruijn <willemb(a)google.com> Acked-by: Jason Wang <jasowang(a)redhat.com> Acked-by: Michael S. Tsirkin <mst(a)redhat.com> Cc: stable(a)vger.kernel.org --- Changes v1->v2: - Fix Cc: - Add Acks from v1 --- include/linux/virtio_net.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 6c395a2600e8d..276ca543ef44d 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -173,7 +173,8 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb, break; case SKB_GSO_TCPV4: case SKB_GSO_TCPV6: - if (skb->csum_offset != offsetof(struct tcphdr, check)) + if (skb->ip_summed == CHECKSUM_PARTIAL && + skb->csum_offset != offsetof(struct tcphdr, check)) return -EINVAL; break; } -- 2.46.0.598.g6f2099f65c-goog

8 months

3
3
0 0

[PATCH] workqueue: Clear worker->pool in the worker thread context

by Lai Jiangshan

From: Lai Jiangshan <jiangshan.ljs(a)antgroup.com> Marc Hartmayer reported: [ 23.133876] Unable to handle kernel pointer dereference in virtual kernel address space [ 23.133950] Failing address: 0000000000000000 TEID: 0000000000000483 [ 23.133954] Fault in home space mode while using kernel ASCE. [ 23.133957] AS:000000001b8f0007 R3:0000000056cf4007 S:0000000056cf3800 P:000000000000003d [ 23.134207] Oops: 0004 ilc:2 [#1] SMP (snip) [ 23.134516] Call Trace: [ 23.134520] [<0000024e326caf28>] worker_thread+0x48/0x430 [ 23.134525] ([<0000024e326caf18>] worker_thread+0x38/0x430) [ 23.134528] [<0000024e326d3a3e>] kthread+0x11e/0x130 [ 23.134533] [<0000024e3264b0dc>] __ret_from_fork+0x3c/0x60 [ 23.134536] [<0000024e333fb37a>] ret_from_fork+0xa/0x38 [ 23.134552] Last Breaking-Event-Address: [ 23.134553] [<0000024e333f4c04>] mutex_unlock+0x24/0x30 [ 23.134562] Kernel panic - not syncing: Fatal exception: panic_on_oops With debuging and analysis, worker_thread() accesses to the nullified worker->pool when the newly created worker is destroyed before being waken-up, in which case worker_thread() can see the result detach_worker() reseting worker->pool to NULL at the begining. Move the code "worker->pool = NULL;" out from detach_worker() to fix the problem. worker->pool had been designed to be constant for regular workers and changeable for rescuer. To share attaching/detaching code for regular and rescuer workers and to avoid worker->pool being accessed inadvertently when the worker has been detached, worker->pool is reset to NULL when detached no matter the worker is rescuer or not. To maintain worker->pool being reset after detached, move the code "worker->pool = NULL;" in the worker thread context after detached. It is either be in the regular worker thread context after PF_WQ_WORKER is cleared or in rescuer worker thread context with wq_pool_attach_mutex held. So it is safe to do so. Cc: Marc Hartmayer <mhartmay(a)linux.ibm.com> Link: https://lore.kernel.org/lkml/87wmjj971b.fsf@linux.ibm.com/ Reported-by: Marc Hartmayer <mhartmay(a)linux.ibm.com> Fixes: f4b7b53c94af ("workqueue: Detach workers directly in idle_cull_fn()") Cc: stable(a)vger.kernel.org # v6.11+ Signed-off-by: Lai Jiangshan <jiangshan.ljs(a)antgroup.com> --- kernel/workqueue.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index e7b005ff3750..6f2545037e57 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2709,7 +2709,6 @@ static void detach_worker(struct worker *worker) unbind_worker(worker); list_del(&worker->node); - worker->pool = NULL; } /** @@ -2729,6 +2728,7 @@ static void worker_detach_from_pool(struct worker *worker) mutex_lock(&wq_pool_attach_mutex); detach_worker(worker); + worker->pool = NULL; mutex_unlock(&wq_pool_attach_mutex); /* clear leftover flags without pool->lock after it is detached */ @@ -3349,7 +3349,11 @@ static int worker_thread(void *__worker) if (unlikely(worker->flags & WORKER_DIE)) { raw_spin_unlock_irq(&pool->lock); set_pf_worker(false); - + /* + * The worker is dead and PF_WQ_WORKER is cleared, worker->pool + * shouldn't be accessed, reset it to NULL in case otherwise. + */ + worker->pool = NULL; ida_free(&pool->worker_ida, worker->id); return 0; } -- 2.19.1.6.gb485710b

8 months

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2024