June 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] irqchip/gic-v3-its: Fix potential race condition in" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x b97e8a2f7130a4b30d1502003095833d16c028b3 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061814-opacity-connected-5c75@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: b97e8a2f7130 ("irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()") 11635fa26dc7 ("irqchip/gic-v3-its: Make vlpi_lock a spinlock") 046b5054f566 ("irqchip/gic-v3-its: Lock VLPI map array before translating it") c1d4d5cd203c ("irqchip/gic-v3-its: Add its_vlpi_map helpers") 425c09be0f09 ("irqchip/gic-v3-its: Allow LPI invalidation via the DirectLPI interface") 2f4f064b3131 ("irqchip/gic-v3-its: Factor out wait_for_syncr primitive") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From b97e8a2f7130a4b30d1502003095833d16c028b3 Mon Sep 17 00:00:00 2001 From: Hagar Hemdan <hagarhem(a)amazon.com> Date: Fri, 31 May 2024 16:21:44 +0000 Subject: [PATCH] irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update() its_vlpi_prop_update() calls lpi_write_config() which obtains the mapping information for a VLPI without lock held. So it could race with its_vlpi_unmap(). Since all calls from its_irq_set_vcpu_affinity() require the same lock to be held, hoist the locking there instead of sprinkling the locking all over the place. This bug was discovered using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. [ tglx: Use guard() instead of goto ] Fixes: 015ec0386ab6 ("irqchip/gic-v3-its: Add VLPI configuration handling") Suggested-by: Marc Zyngier <maz(a)kernel.org> Signed-off-by: Hagar Hemdan <hagarhem(a)amazon.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: stable(a)vger.kernel.org Reviewed-by: Marc Zyngier <maz(a)kernel.org> Link: https://lore.kernel.org/r/20240531162144.28650-1-hagarhem@amazon.com diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 40ebf1726393..3c755d5dad6e 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -1846,28 +1846,22 @@ static int its_vlpi_map(struct irq_data *d, struct its_cmd_info *info) { struct its_device *its_dev = irq_data_get_irq_chip_data(d); u32 event = its_get_event_id(d); - int ret = 0; if (!info->map) return -EINVAL; - raw_spin_lock(&its_dev->event_map.vlpi_lock); - if (!its_dev->event_map.vm) { struct its_vlpi_map *maps; maps = kcalloc(its_dev->event_map.nr_lpis, sizeof(*maps), GFP_ATOMIC); - if (!maps) { - ret = -ENOMEM; - goto out; - } + if (!maps) + return -ENOMEM; its_dev->event_map.vm = info->map->vm; its_dev->event_map.vlpi_maps = maps; } else if (its_dev->event_map.vm != info->map->vm) { - ret = -EINVAL; - goto out; + return -EINVAL; } /* Get our private copy of the mapping information */ @@ -1899,46 +1893,32 @@ static int its_vlpi_map(struct irq_data *d, struct its_cmd_info *info) its_dev->event_map.nr_vlpis++; } -out: - raw_spin_unlock(&its_dev->event_map.vlpi_lock); - return ret; + return 0; } static int its_vlpi_get(struct irq_data *d, struct its_cmd_info *info) { struct its_device *its_dev = irq_data_get_irq_chip_data(d); struct its_vlpi_map *map; - int ret = 0; - - raw_spin_lock(&its_dev->event_map.vlpi_lock); map = get_vlpi_map(d); - if (!its_dev->event_map.vm || !map) { - ret = -EINVAL; - goto out; - } + if (!its_dev->event_map.vm || !map) + return -EINVAL; /* Copy our mapping information to the incoming request */ *info->map = *map; -out: - raw_spin_unlock(&its_dev->event_map.vlpi_lock); - return ret; + return 0; } static int its_vlpi_unmap(struct irq_data *d) { struct its_device *its_dev = irq_data_get_irq_chip_data(d); u32 event = its_get_event_id(d); - int ret = 0; - raw_spin_lock(&its_dev->event_map.vlpi_lock); - - if (!its_dev->event_map.vm || !irqd_is_forwarded_to_vcpu(d)) { - ret = -EINVAL; - goto out; - } + if (!its_dev->event_map.vm || !irqd_is_forwarded_to_vcpu(d)) + return -EINVAL; /* Drop the virtual mapping */ its_send_discard(its_dev, event); @@ -1962,9 +1942,7 @@ static int its_vlpi_unmap(struct irq_data *d) kfree(its_dev->event_map.vlpi_maps); } -out: - raw_spin_unlock(&its_dev->event_map.vlpi_lock); - return ret; + return 0; } static int its_vlpi_prop_update(struct irq_data *d, struct its_cmd_info *info) @@ -1992,6 +1970,8 @@ static int its_irq_set_vcpu_affinity(struct irq_data *d, void *vcpu_info) if (!is_v4(its_dev->its)) return -EINVAL; + guard(raw_spinlock_irq)(&its_dev->event_map.vlpi_lock); + /* Unmap request? */ if (!info) return its_vlpi_unmap(d);

6 months, 3 weeks

1
0
0 0

[PATCH AUTOSEL 4.19 1/9] scsi: qedf: Set qed_slowpath_params to zero before use

by Sasha Levin

From: Saurav Kashyap <skashyap(a)marvell.com> [ Upstream commit 6c3bb589debd763dc4b94803ddf3c13b4fcca776 ] Zero qed_slowpath_params before use. Signed-off-by: Saurav Kashyap <skashyap(a)marvell.com> Signed-off-by: Nilesh Javali <njavali(a)marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/scsi/qedf/qedf_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index 01e27285b26ba..33fb0e1926831 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3101,6 +3101,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) } /* Start the Slowpath-process */ + memset(&slowpath_params, 0, sizeof(struct qed_slowpath_params)); slowpath_params.int_mode = QED_INT_MODE_MSIX; slowpath_params.drv_major = QEDF_DRIVER_MAJOR_VER; slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER; -- 2.43.0

6 months, 3 weeks

1
8
0 0

[PATCH AUTOSEL 5.4 1/9] scsi: qedf: Set qed_slowpath_params to zero before use

by Sasha Levin

From: Saurav Kashyap <skashyap(a)marvell.com> [ Upstream commit 6c3bb589debd763dc4b94803ddf3c13b4fcca776 ] Zero qed_slowpath_params before use. Signed-off-by: Saurav Kashyap <skashyap(a)marvell.com> Signed-off-by: Nilesh Javali <njavali(a)marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/scsi/qedf/qedf_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index 858058f228191..e0601b5520b78 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3299,6 +3299,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) } /* Start the Slowpath-process */ + memset(&slowpath_params, 0, sizeof(struct qed_slowpath_params)); slowpath_params.int_mode = QED_INT_MODE_MSIX; slowpath_params.drv_major = QEDF_DRIVER_MAJOR_VER; slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER; -- 2.43.0

6 months, 3 weeks

1
8
0 0

[PATCH AUTOSEL 5.10 01/13] scsi: qedf: Set qed_slowpath_params to zero before use

by Sasha Levin

From: Saurav Kashyap <skashyap(a)marvell.com> [ Upstream commit 6c3bb589debd763dc4b94803ddf3c13b4fcca776 ] Zero qed_slowpath_params before use. Signed-off-by: Saurav Kashyap <skashyap(a)marvell.com> Signed-off-by: Nilesh Javali <njavali(a)marvell.com> Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/scsi/qedf/qedf_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c index 6923862be3fbc..2536da96130ea 100644 --- a/drivers/scsi/qedf/qedf_main.c +++ b/drivers/scsi/qedf/qedf_main.c @@ -3453,6 +3453,7 @@ static int __qedf_probe(struct pci_dev *pdev, int mode) } /* Start the Slowpath-process */ + memset(&slowpath_params, 0, sizeof(struct qed_slowpath_params)); slowpath_params.int_mode = QED_INT_MODE_MSIX; slowpath_params.drv_major = QEDF_DRIVER_MAJOR_VER; slowpath_params.drv_minor = QEDF_DRIVER_MINOR_VER; -- 2.43.0

6 months, 3 weeks

1
12
0 0

[PATCH AUTOSEL 5.15 01/21] scsi: core: alua: I/O errors for ALUA state transitions

by Sasha Levin

From: Martin Wilck <martin.wilck(a)suse.com> [ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ] When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. [mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.] [1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVE… Co-developed-by: Rajashekhar M A <rajs(a)netapp.com> Co-developed-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Martin Wilck <martin.wilck(a)suse.com> Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Mike Christie <michael.christie(a)oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/scsi/device_handler/scsi_dh_alua.c | 31 +++++++++++++++------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index a9c4a5e2ccb90..60792f257c235 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -406,28 +406,40 @@ static char print_alua_state(unsigned char state) } } -static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, - struct scsi_sense_hdr *sense_hdr) +static void alua_handle_state_transition(struct scsi_device *sdev) { struct alua_dh_data *h = sdev->handler_data; struct alua_port_group *pg; + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (pg) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + rcu_read_unlock(); + alua_check(sdev, false); +} + +static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ switch (sense_hdr->sense_key) { case NOT_READY: if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { /* * LUN Not Accessible - ALUA state transition */ - rcu_read_lock(); - pg = rcu_dereference(h->pg); - if (pg) - pg->state = SCSI_ACCESS_STATE_TRANSITIONING; - rcu_read_unlock(); - alua_check(sdev, false); + alua_handle_state_transition(sdev); return NEEDS_RETRY; } break; case UNIT_ATTENTION: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { + /* + * LUN Not Accessible - ALUA state transition + */ + alua_handle_state_transition(sdev); + return NEEDS_RETRY; + } if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) { /* * Power On, Reset, or Bus Device Reset. @@ -494,7 +506,8 @@ static int alua_tur(struct scsi_device *sdev) retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ, ALUA_FAILOVER_RETRIES, &sense_hdr); - if (sense_hdr.sense_key == NOT_READY && + if ((sense_hdr.sense_key == NOT_READY || + sense_hdr.sense_key == UNIT_ATTENTION) && sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) return SCSI_DH_RETRY; else if (retval) -- 2.43.0

6 months, 3 weeks

1
20
0 0

[PATCH AUTOSEL 6.9 01/44] scsi: core: alua: I/O errors for ALUA state transitions

by Sasha Levin

From: Martin Wilck <martin.wilck(a)suse.com> [ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ] When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. [mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.] [1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVE… Co-developed-by: Rajashekhar M A <rajs(a)netapp.com> Co-developed-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Martin Wilck <martin.wilck(a)suse.com> Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Mike Christie <michael.christie(a)oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/scsi/device_handler/scsi_dh_alua.c | 31 +++++++++++++++------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index a226dc1b65d71..4eb0837298d4d 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -414,28 +414,40 @@ static char print_alua_state(unsigned char state) } } -static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, - struct scsi_sense_hdr *sense_hdr) +static void alua_handle_state_transition(struct scsi_device *sdev) { struct alua_dh_data *h = sdev->handler_data; struct alua_port_group *pg; + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (pg) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + rcu_read_unlock(); + alua_check(sdev, false); +} + +static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ switch (sense_hdr->sense_key) { case NOT_READY: if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { /* * LUN Not Accessible - ALUA state transition */ - rcu_read_lock(); - pg = rcu_dereference(h->pg); - if (pg) - pg->state = SCSI_ACCESS_STATE_TRANSITIONING; - rcu_read_unlock(); - alua_check(sdev, false); + alua_handle_state_transition(sdev); return NEEDS_RETRY; } break; case UNIT_ATTENTION: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { + /* + * LUN Not Accessible - ALUA state transition + */ + alua_handle_state_transition(sdev); + return NEEDS_RETRY; + } if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) { /* * Power On, Reset, or Bus Device Reset. @@ -502,7 +514,8 @@ static int alua_tur(struct scsi_device *sdev) retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ, ALUA_FAILOVER_RETRIES, &sense_hdr); - if (sense_hdr.sense_key == NOT_READY && + if ((sense_hdr.sense_key == NOT_READY || + sense_hdr.sense_key == UNIT_ATTENTION) && sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) return SCSI_DH_RETRY; else if (retval) -- 2.43.0

6 months, 3 weeks

2
44
0 0

[PATCH AUTOSEL 6.6 01/35] scsi: core: alua: I/O errors for ALUA state transitions

by Sasha Levin

From: Martin Wilck <martin.wilck(a)suse.com> [ Upstream commit 10157b1fc1a762293381e9145041253420dfc6ad ] When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. [mwilck: The original patch was developed by Rajashekhar M A and Hannes Reinecke. I moved the code to alua_check_sense() as suggested by Mike Christie [1]. Evan Milne had raised the question whether pg->state should be set to transitioning in the UA case [2]. I believe that doing this is correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O errors. Our handler schedules an RTPG, which will only result in an I/O error condition if the transitioning timeout expires.] [1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/ [2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVE… Co-developed-by: Rajashekhar M A <rajs(a)netapp.com> Co-developed-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Hannes Reinecke <hare(a)suse.de> Signed-off-by: Martin Wilck <martin.wilck(a)suse.com> Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com Reviewed-by: Damien Le Moal <dlemoal(a)kernel.org> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Mike Christie <michael.christie(a)oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/scsi/device_handler/scsi_dh_alua.c | 31 +++++++++++++++------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index a226dc1b65d71..4eb0837298d4d 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -414,28 +414,40 @@ static char print_alua_state(unsigned char state) } } -static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, - struct scsi_sense_hdr *sense_hdr) +static void alua_handle_state_transition(struct scsi_device *sdev) { struct alua_dh_data *h = sdev->handler_data; struct alua_port_group *pg; + rcu_read_lock(); + pg = rcu_dereference(h->pg); + if (pg) + pg->state = SCSI_ACCESS_STATE_TRANSITIONING; + rcu_read_unlock(); + alua_check(sdev, false); +} + +static enum scsi_disposition alua_check_sense(struct scsi_device *sdev, + struct scsi_sense_hdr *sense_hdr) +{ switch (sense_hdr->sense_key) { case NOT_READY: if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { /* * LUN Not Accessible - ALUA state transition */ - rcu_read_lock(); - pg = rcu_dereference(h->pg); - if (pg) - pg->state = SCSI_ACCESS_STATE_TRANSITIONING; - rcu_read_unlock(); - alua_check(sdev, false); + alua_handle_state_transition(sdev); return NEEDS_RETRY; } break; case UNIT_ATTENTION: + if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0a) { + /* + * LUN Not Accessible - ALUA state transition + */ + alua_handle_state_transition(sdev); + return NEEDS_RETRY; + } if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00) { /* * Power On, Reset, or Bus Device Reset. @@ -502,7 +514,8 @@ static int alua_tur(struct scsi_device *sdev) retval = scsi_test_unit_ready(sdev, ALUA_FAILOVER_TIMEOUT * HZ, ALUA_FAILOVER_RETRIES, &sense_hdr); - if (sense_hdr.sense_key == NOT_READY && + if ((sense_hdr.sense_key == NOT_READY || + sense_hdr.sense_key == UNIT_ATTENTION) && sense_hdr.asc == 0x04 && sense_hdr.ascq == 0x0a) return SCSI_DH_RETRY; else if (retval) -- 2.43.0

6 months, 3 weeks

1
34
0 0

[PATCH v4] media: venus: fix use after free in vdec_close

by Dikshita Agarwal

There appears to be a possible use after free with vdec_close(). The firmware will add buffer release work to the work queue through HFI callbacks as a normal part of decoding. Randomly closing the decoder device from userspace during normal decoding can incur a read after free for inst. Fix it by cancelling the work in vdec_close. Cc: stable(a)vger.kernel.org Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Dikshita Agarwal <quic_dikshita(a)quicinc.com> --- Changes since v3: - Fixed style issue with fixes tag Changes since v2: - Fixed email id Changes since v1: - Added fixes and stable tags drivers/media/platform/qcom/venus/vdec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c index 29130a9..56f8a25 100644 --- a/drivers/media/platform/qcom/venus/vdec.c +++ b/drivers/media/platform/qcom/venus/vdec.c @@ -1747,6 +1747,7 @@ static int vdec_close(struct file *file) vdec_pm_get(inst); + cancel_work_sync(&inst->delayed_process_work); v4l2_m2m_ctx_release(inst->m2m_ctx); v4l2_m2m_release(inst->m2m_dev); vdec_ctrl_deinit(inst); -- 2.7.4

6 months, 3 weeks

2
1
0 0

FAILED: patch "[PATCH] mptcp: pm: update add_addr counters after connect" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 40eec1795cc27b076d49236649a29507c7ed8c2d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061753-platinum-rented-6220@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 40eec1795cc2 ("mptcp: pm: update add_addr counters after connect") 6a09788c1a66 ("mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID") e571fb09c893 ("selftests: mptcp: add speed env var") 4aadde088a58 ("selftests: mptcp: add fullmesh env var") 080b7f5733fd ("selftests: mptcp: add fastclose env var") 662aa22d7dcd ("selftests: mptcp: set all env vars as local ones") 9e9d176df8e9 ("selftests: mptcp: add pm_nl_set_endpoint helper") 1534f87ee0dc ("selftests: mptcp: drop sflags parameter") 595ef566a2ef ("selftests: mptcp: drop addr_nr_ns1/2 parameters") 0c93af1f8907 ("selftests: mptcp: drop test_linkfail parameter") be7e9786c915 ("selftests: mptcp: set FAILING_LINKS in run_tests") 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") ae947bb2c253 ("selftests: mptcp: join: skip Fastclose tests if not supported") d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not") 4a0b866a3f7d ("selftests: mptcp: join: skip test if iptables/tc cmds fail") 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available") 6c160b636c91 ("selftests: mptcp: update userspace pm subflow tests") 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests") 8697a258ae24 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 40eec1795cc27b076d49236649a29507c7ed8c2d Mon Sep 17 00:00:00 2001 From: YonglongLi <liyonglong(a)chinatelecom.cn> Date: Fri, 7 Jun 2024 17:01:50 +0200 Subject: [PATCH] mptcp: pm: update add_addr counters after connect The creation of new subflows can fail for different reasons. If no subflow have been created using the received ADD_ADDR, the related counters should not be updated, otherwise they will never be decremented for events related to this ID later on. For the moment, the number of accepted ADD_ADDR is only decremented upon the reception of a related RM_ADDR, and only if the remote address ID is currently being used by at least one subflow. In other words, if no subflow can be created with the received address, the counter will not be decremented. In this case, it is then important not to increment pm.add_addr_accepted counter, and not to modify pm.accept_addr bit. Note that this patch does not modify the behaviour in case of failures later on, e.g. if the MP Join is dropped or rejected. The "remove invalid addresses" MP Join subtest has been modified to validate this case. The broadcast IP address is added before the "valid" address that will be used to successfully create a subflow, and the limit is decreased by one: without this patch, it was not possible to create the last subflow, because: - the broadcast address would have been accepted even if it was not usable: the creation of a subflow to this address results in an error, - the limit of 2 accepted ADD_ADDR would have then been reached. Fixes: 01cacb00b35c ("mptcp: add netlink-based PM") Cc: stable(a)vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: YonglongLi <liyonglong(a)chinatelecom.cn> Reviewed-by: Mat Martineau <martineau(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1a… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 766a8409fa67..ea9e5817b9e9 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -677,6 +677,7 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) unsigned int add_addr_accept_max; struct mptcp_addr_info remote; unsigned int subflows_max; + bool sf_created = false; int i, nr; add_addr_accept_max = mptcp_pm_get_add_addr_accept_max(msk); @@ -704,15 +705,18 @@ static void mptcp_pm_nl_add_addr_received(struct mptcp_sock *msk) if (nr == 0) return; - msk->pm.add_addr_accepted++; - if (msk->pm.add_addr_accepted >= add_addr_accept_max || - msk->pm.subflows >= subflows_max) - WRITE_ONCE(msk->pm.accept_addr, false); - spin_unlock_bh(&msk->pm.lock); for (i = 0; i < nr; i++) - __mptcp_subflow_connect(sk, &addrs[i], &remote); + if (__mptcp_subflow_connect(sk, &addrs[i], &remote) == 0) + sf_created = true; spin_lock_bh(&msk->pm.lock); + + if (sf_created) { + msk->pm.add_addr_accepted++; + if (msk->pm.add_addr_accepted >= add_addr_accept_max || + msk->pm.subflows >= subflows_max) + WRITE_ONCE(msk->pm.accept_addr, false); + } } void mptcp_pm_nl_addr_send_ack(struct mptcp_sock *msk) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index aea314d140c9..108aeeb84ef1 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2249,10 +2249,10 @@ remove_tests() if reset "remove invalid addresses"; then pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal - pm_nl_add_endpoint $ns1 10.0.3.1 flags signal # broadcast IP: no packet for this address will be received on ns1 pm_nl_add_endpoint $ns1 224.0.0.1 flags signal - pm_nl_set_limits $ns2 3 3 + pm_nl_add_endpoint $ns1 10.0.3.1 flags signal + pm_nl_set_limits $ns2 2 2 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1 chk_join_nr 1 1 1

6 months, 3 weeks

2
1
0 0

FAILED: patch "[PATCH] mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 6a09788c1a66e3d8b04b3b3e7618cc817bb60ae9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024061738-bright-knelt-4f2a@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 6a09788c1a66 ("mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID") 3ad14f54bd74 ("mptcp: more accurate MPC endpoint tracking") c157bbe776b7 ("mptcp: allow the in kernel PM to set MPC subflow priority") 843b5e75efff ("mptcp: fix local endpoint accounting") 4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs") 0530020a7c8f ("mptcp: track and update contiguous data status") 0348c690ed37 ("mptcp: add the fallback check") 1761fed25678 ("mptcp: don't send RST for single subflow") c682bf536cf4 ("mptcp: add pm_nl_pernet helpers") ae7bd9ccecc3 ("selftests: mptcp: join: option to execute specific tests") e59300ce3ff8 ("selftests: mptcp: join: reset failing links") 3afd0280e7d3 ("selftests: mptcp: join: define tests groups once") 3c082695e78b ("selftests: mptcp: drop msg argument of chk_csum_nr") 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") 4cf86ae84c71 ("mptcp: strict local address ID selection") d045b9eb95a9 ("mptcp: introduce implicit endpoints") 6fa0174a7c86 ("mptcp: more careful RM_ADDR generation") f98c2bca7b2b ("selftests: mptcp: Rename wait function") 826d7bdca833 ("selftests: mptcp: join: allow running -cCi") ea56dcb43c20 ("mptcp: use MPTCP_SUBFLOW_NODATA") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 6a09788c1a66e3d8b04b3b3e7618cc817bb60ae9 Mon Sep 17 00:00:00 2001 From: YonglongLi <liyonglong(a)chinatelecom.cn> Date: Fri, 7 Jun 2024 17:01:49 +0200 Subject: [PATCH] mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID The RmAddr MIB counter is supposed to be incremented once when a valid RM_ADDR has been received. Before this patch, it could have been incremented as many times as the number of subflows connected to the linked address ID, so it could have been 0, 1 or more than 1. The "RmSubflow" is incremented after a local operation. In this case, it is normal to tied it with the number of subflows that have been actually removed. The "remove invalid addresses" MP Join subtest has been modified to validate this case. A broadcast IP address is now used instead: the client will not be able to create a subflow to this address. The consequence is that when receiving the RM_ADDR with the ID attached to this broadcast IP address, no subflow linked to this ID will be found. Fixes: 7a7e52e38a40 ("mptcp: add RM_ADDR related mibs") Cc: stable(a)vger.kernel.org Co-developed-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Signed-off-by: YonglongLi <liyonglong(a)chinatelecom.cn> Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1a… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index 7f53e022e27e..766a8409fa67 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -814,10 +814,13 @@ static void mptcp_pm_nl_rm_addr_or_subflow(struct mptcp_sock *msk, spin_lock_bh(&msk->pm.lock); removed = true; - __MPTCP_INC_STATS(sock_net(sk), rm_type); + if (rm_type == MPTCP_MIB_RMSUBFLOW) + __MPTCP_INC_STATS(sock_net(sk), rm_type); } if (rm_type == MPTCP_MIB_RMSUBFLOW) __set_bit(rm_id ? rm_id : msk->mpc_endpoint_id, msk->pm.id_avail_bitmap); + else if (rm_type == MPTCP_MIB_RMADDR) + __MPTCP_INC_STATS(sock_net(sk), rm_type); if (!removed) continue; diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 2b66c5fa71eb..aea314d140c9 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -2250,7 +2250,8 @@ remove_tests() pm_nl_set_limits $ns1 3 3 pm_nl_add_endpoint $ns1 10.0.12.1 flags signal pm_nl_add_endpoint $ns1 10.0.3.1 flags signal - pm_nl_add_endpoint $ns1 10.0.14.1 flags signal + # broadcast IP: no packet for this address will be received on ns1 + pm_nl_add_endpoint $ns1 224.0.0.1 flags signal pm_nl_set_limits $ns2 3 3 addr_nr_ns1=-3 speed=10 \ run_tests $ns1 $ns2 10.0.1.1

6 months, 3 weeks

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2024