From: Vitor Soares <vitor.soares(a)toradex.com>
When the mcp251xfd_start_xmit() function fails, the driver stops
processing messages, and the interrupt routine does not return,
running indefinitely even after killing the running application.
Error messages:
[ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16
[ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3).
... and repeat forever.
The issue can be triggered when multiple devices share the same
SPI interface. And there is concurrent access to the bus.
The problem occurs because tx_ring->head increments even if
mcp251xfd_start_xmit() fails. Consequently, the driver skips one
TX package while still expecting a response in
mcp251xfd_handle_tefif_one().
This patch resolves the issue by decreasing tx_ring->head if
mcp251xfd_start_xmit() fails. With the fix, if we trigger the issue and
the err = -EBUSY, the driver returns NETDEV_TX_BUSY. The network stack
retries to transmit the message.
Otherwise, it prints an error and discards the message.
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Cc: stable(a)vger.kernel.org
Signed-off-by: Vitor Soares <vitor.soares(a)toradex.com>
---
V2->V3:
- Add tx_dropped stats.
- netdev_sent_queue() only if can_put_echo_skb() succeed.
V1->V2:
- Return NETDEV_TX_BUSY if mcp251xfd_tx_obj_write() == -EBUSY.
- Rework the commit message to address the change above.
- Change can_put_echo_skb() to be called after mcp251xfd_tx_obj_write() succeed.
Otherwise, we get Kernel NULL pointer dereference error.
drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c | 34 ++++++++++++--------
1 file changed, 21 insertions(+), 13 deletions(-)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
index 160528d3cc26..146c44e47c60 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-tx.c
@@ -166,6 +166,7 @@ netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb,
struct net_device *ndev)
{
struct mcp251xfd_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &ndev->stats;
struct mcp251xfd_tx_ring *tx_ring = priv->tx;
struct mcp251xfd_tx_obj *tx_obj;
unsigned int frame_len;
@@ -181,25 +182,32 @@ netdev_tx_t mcp251xfd_start_xmit(struct sk_buff *skb,
tx_obj = mcp251xfd_get_tx_obj_next(tx_ring);
mcp251xfd_tx_obj_from_skb(priv, tx_obj, skb, tx_ring->head);
- /* Stop queue if we occupy the complete TX FIFO */
tx_head = mcp251xfd_get_tx_head(tx_ring);
- tx_ring->head++;
- if (mcp251xfd_get_tx_free(tx_ring) == 0)
- netif_stop_queue(ndev);
-
frame_len = can_skb_get_frame_len(skb);
- err = can_put_echo_skb(skb, ndev, tx_head, frame_len);
- if (!err)
- netdev_sent_queue(priv->ndev, frame_len);
+
+ tx_ring->head++;
err = mcp251xfd_tx_obj_write(priv, tx_obj);
- if (err)
- goto out_err;
+ if (err) {
+ tx_ring->head--;
- return NETDEV_TX_OK;
+ if (err == -EBUSY)
+ return NETDEV_TX_BUSY;
- out_err:
- netdev_err(priv->ndev, "ERROR in %s: %d\n", __func__, err);
+ stats->tx_dropped++;
+
+ if (net_ratelimit())
+ netdev_err(priv->ndev,
+ "ERROR in %s: %d\n", __func__, err);
+ } else {
+ err = can_put_echo_skb(skb, ndev, tx_head, frame_len);
+ if (!err)
+ netdev_sent_queue(priv->ndev, frame_len);
+
+ /* Stop queue if we occupy the complete TX FIFO */
+ if (mcp251xfd_get_tx_free(tx_ring) == 0)
+ netif_stop_queue(ndev);
+ }
return NETDEV_TX_OK;
}
--
2.34.1
This is the start of the stable review cycle for the 4.19.310 release.
There are 41 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri Mar 15 05:04:34 PM UTC 2024.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/…
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
Thanks,
Sasha
-------------
Pseudo-Shortlog of commits:
Arnd Bergmann (1):
y2038: rusage: use __kernel_old_timeval
Christophe Leroy (3):
tools/selftest/vm: allow choosing mem size and page size in
map_hugetlb
selftests/vm: fix display of page size in map_hugetlb
selftests/vm: fix map_hugetlb length used for testing read and write
Dexuan Cui (1):
hv_netvsc: Make netvsc/VF binding check both MAC and serial number
Edward Adam Davis (1):
net/rds: fix WARNING in rds_conn_connect_if_down
Eric Dumazet (2):
geneve: make sure to pull inner header in geneve_rx()
net/ipv6: avoid possible UAF in ip6_route_mpath_notify()
Fedor Pchelkin (1):
btrfs: ref-verify: free ref cache before clearing mount opt
Ingo Molnar (1):
exit: Fix typo in comment: s/sub-theads/sub-threads
Jason Xing (12):
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netrom: Fix a data-race around
sysctl_netrom_obsolescence_count_initialiser
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around
sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around
sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around
sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix data-races around sysctl_net_busy_read
Johannes Berg (1):
um: allow not setting extra rpaths in the linux binary
John Efstathiades (4):
lan78xx: Fix white space and style issues
lan78xx: Add missing return code checks
lan78xx: Fix partial packet errors on suspend/resume
lan78xx: Fix race conditions in suspend/resume handling
Juhee Kang (1):
hv_netvsc: use netif_is_bond_master() instead of open code
Lee Jones (1):
net: usb: lan78xx: Remove lots of set but unused 'ret' variables
Lena Wang (1):
netfilter: nf_conntrack_h323: Add protection for bmp length out of
range
Li RongQing (1):
net: move definition of pcpu_lstats to header file
Nico Pache (1):
selftests: mm: fix map_hugetlb failure on 64K page size systems
Oleg Nesterov (5):
getrusage: add the "signal_struct *sig" local variable
getrusage: move thread_group_cputime_adjusted() outside of
lock_task_sighand()
getrusage: use __for_each_thread()
getrusage: use sig->stats_lock rather than lock_task_sighand()
exit: wait_task_zombie: kill the no longer necessary
spin_lock_irq(siglock)
Oleksij Rempel (1):
net: lan78xx: fix runtime PM count underflow on link stop
Sasha Levin (1):
Linux 4.19.310-rc1
Shradha Gupta (1):
hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missed
Werner Sembach (1):
Input: i8042 - fix strange behavior of touchpad on Clevo NS70PU
Makefile | 4 +-
arch/alpha/kernel/osf_sys.c | 2 +-
arch/um/Kconfig | 13 +
arch/um/Makefile | 3 +-
arch/x86/Makefile.um | 2 +-
drivers/input/serio/i8042-x86ia64io.h | 6 +
drivers/net/geneve.c | 18 +-
drivers/net/hyperv/netvsc_drv.c | 96 ++-
drivers/net/loopback.c | 6 -
drivers/net/nlmon.c | 6 -
drivers/net/usb/lan78xx.c | 966 +++++++++++++++++------
drivers/net/vsockmon.c | 14 +-
fs/btrfs/ref-verify.c | 6 +-
include/linux/netdevice.h | 6 +
include/uapi/linux/resource.h | 4 +-
kernel/exit.c | 12 +-
kernel/sys.c | 91 ++-
net/ipv6/route.c | 21 +-
net/netfilter/nf_conntrack_h323_asn1.c | 4 +
net/netrom/af_netrom.c | 14 +-
net/netrom/nr_dev.c | 2 +-
net/netrom/nr_in.c | 6 +-
net/netrom/nr_out.c | 2 +-
net/netrom/nr_route.c | 8 +-
net/netrom/nr_subr.c | 5 +-
net/rds/rdma.c | 3 +
net/rds/send.c | 6 +-
tools/testing/selftests/vm/map_hugetlb.c | 50 +-
28 files changed, 994 insertions(+), 382 deletions(-)
--
2.43.0
xen kbdfront registers itself as being able to deliver *any* key since
it doesn't know what keys the backend may produce.
Unfortunately, the generated modalias gets too large and uevent creation
fails with -ENOMEM.
This can lead to gdm not using the keyboard since there is no seat
associated [1] and the debian installer crashing [2].
Trim the ranges of key capabilities by removing some BTN_* ranges.
While doing this, some neighboring undefined ranges are removed to trim
it further.
An upper limit of KEY_KBD_LCD_MENU5 is still too large. Use an upper
limit of KEY_BRIGHTNESS_MENU.
This removes:
BTN_DPAD_UP(0x220)..BTN_DPAD_RIGHT(0x223)
Empty space 0x224..0x229
Empty space 0x28a..0x28f
KEY_MACRO1(0x290)..KEY_MACRO30(0x2ad)
KEY_MACRO_RECORD_START 0x2b0
KEY_MACRO_RECORD_STOP 0x2b1
KEY_MACRO_PRESET_CYCLE 0x2b2
KEY_MACRO_PRESET1(0x2b3)..KEY_MACRO_PRESET3(0xb5)
Empty space 0x2b6..0x2b7
KEY_KBD_LCD_MENU1(0x2b8)..KEY_KBD_LCD_MENU5(0x2bc)
Empty space 0x2bd..0x2bf
BTN_TRIGGER_HAPPY(0x2c0)..BTN_TRIGGER_HAPPY40(0x2e7)
Empty space 0x2e8..0x2ff
The modalias shrinks from 2082 to 1550 bytes.
A chunk of keys need to be removed to allow the keyboard to be used.
This may break some functionality, but the hope is these macro keys are
uncommon and don't affect any users.
[1] https://github.com/systemd/systemd/issues/22944
[2] https://lore.kernel.org/xen-devel/87o8dw52jc.fsf@vps.thesusis.net/T/
Cc: Phillip Susi <phill(a)thesusis.net>
Cc: stable(a)vger.kernel.org
Signed-off-by: Jason Andryuk <jandryuk(a)gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek(a)baylibre.com>
---
v3:
Add Mattijs R-b
Put /* and */ on separate lines
---
drivers/input/misc/xen-kbdfront.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/input/misc/xen-kbdfront.c b/drivers/input/misc/xen-kbdfront.c
index 67f1c7364c95..d59ba8f9852e 100644
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -256,7 +256,16 @@ static int xenkbd_probe(struct xenbus_device *dev,
__set_bit(EV_KEY, kbd->evbit);
for (i = KEY_ESC; i < KEY_UNKNOWN; i++)
__set_bit(i, kbd->keybit);
- for (i = KEY_OK; i < KEY_MAX; i++)
+ /*
+ * In theory we want to go KEY_OK..KEY_MAX, but that grows the
+ * modalias line too long. There is a gap of buttons from
+ * BTN_DPAD_UP..BTN_DPAD_RIGHT and KEY_ALS_TOGGLE is the next
+ * defined. Then continue up to KEY_BRIGHTNESS_MENU as an upper
+ * limit.
+ */
+ for (i = KEY_OK; i < BTN_DPAD_UP; i++)
+ __set_bit(i, kbd->keybit);
+ for (i = KEY_ALS_TOGGLE; i <= KEY_BRIGHTNESS_MENU; i++)
__set_bit(i, kbd->keybit);
ret = input_register_device(kbd);
--
2.41.0
The clk_alpha_pll_stromer_set_rate() function writes inproper
values into the ALPHA_VAL{,_U} registers which results in wrong
clock rates when the alpha value is used.
The broken behaviour can be seen on IPQ5018 for example, when
dynamic scaling sets the CPU frequency to 800000 KHz. In this
case the CPU cores are running only at 792031 KHz:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
800000
# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
792031
This happens because the function ignores the fact that the alpha
value calculated by the alpha_pll_round_rate() function is only
32 bits wide which must be extended to 40 bits if it is used on
a hardware which supports 40 bits wide values.
Extend the clk_alpha_pll_stromer_set_rate() function to convert
the alpha value to 40 bits before wrinting that into the registers
in order to ensure that the hardware really uses the requested rate.
After the change the CPU frequency is correct:
# cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
800000
# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
800000
Cc: stable(a)vger.kernel.org
Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org>
Signed-off-by: Gabor Juhos <j4g8y7(a)gmail.com>
---
Changes in v3:
- remove constants' comparison (Konrad)
- Link to v2: https://lore.kernel.org/r/20240326-alpha-pll-fix-stromer-set-rate-v2-1-48ae…
Changes in v2:
- fix subject prefix
- rebase on v6.9-rc1
- Link to v1: https://lore.kernel.org/r/20240324-alpha-pll-fix-stromer-set-rate-v1-1-335b…
Depends on the following patch:
https://lore.kernel.org/r/20240315-apss-ipq-pll-ipq5018-hang-v2-1-6fe30ada2…
---
drivers/clk/qcom/clk-alpha-pll.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 8a412ef47e16..8a8abb429577 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -2490,6 +2490,8 @@ static int clk_alpha_pll_stromer_set_rate(struct clk_hw *hw, unsigned long rate,
rate = alpha_pll_round_rate(rate, prate, &l, &a, ALPHA_REG_BITWIDTH);
regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+
+ a <<= ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH;
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL_U(pll),
a >> ALPHA_BITWIDTH);
---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20240324-alpha-pll-fix-stromer-set-rate-472376e624f0
Best regards,
--
Gabor Juhos <j4g8y7(a)gmail.com>
Booting v6.8 results in a hang on various IPQ5018 based boards.
Investigating the problem showed that the hang happens when the
clk_alpha_pll_stromer_plus_set_rate() function tries to write
into the PLL_MODE register of the APSS PLL.
Checking the downstream code revealed that it uses [1] stromer
specific operations for IPQ5018, whereas in the current code
the stromer plus specific operations are used.
The ops in the 'ipq_pll_stromer_plus' clock definition can't be
changed since that is needed for IPQ5332, so add a new alpha pll
clock declaration which uses the correct stromer ops and use this
new clock for IPQ5018 to avoid the boot failure.
Also, change pll_type in 'ipq5018_pll_data' to
CLK_ALPHA_PLL_TYPE_STROMER to better reflect that it is a Stromer
PLL and change the apss_ipq_pll_probe() function accordingly.
1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QS…
Cc: stable(a)vger.kernel.org
Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7(a)gmail.com>
---
Changes in v2:
- extend commit description due to the changes
- add a comment about why CLK_ALPHA_PLL_TYPE_STROMER_PLUS register offsets
are used
- constify hw clock init data (Stephen)
- change pll_type in ipq5018_pll_data to CLK_ALPHA_PLL_TYPE_STROMER (Konrad)
- Link to v1: https://lore.kernel.org/r/20240311-apss-ipq-pll-ipq5018-hang-v1-1-8ed42b7a9…
---
Based on v6.8.
---
drivers/clk/qcom/apss-ipq-pll.c | 30 +++++++++++++++++++++++++++---
1 file changed, 27 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index 678b805f13d45..dfffec2f06ae7 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -55,6 +55,29 @@ static struct clk_alpha_pll ipq_pll_huayra = {
},
};
+static struct clk_alpha_pll ipq_pll_stromer = {
+ .offset = 0x0,
+ /*
+ * Reuse CLK_ALPHA_PLL_TYPE_STROMER_PLUS register offsets.
+ * Although this is a bit confusing, but the offset values
+ * are correct nevertheless.
+ */
+ .regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
+ .flags = SUPPORTS_DYNAMIC_UPDATE,
+ .clkr = {
+ .enable_reg = 0x0,
+ .enable_mask = BIT(0),
+ .hw.init = &(const struct clk_init_data) {
+ .name = "a53pll",
+ .parent_data = &(const struct clk_parent_data) {
+ .fw_name = "xo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_stromer_ops,
+ },
+ },
+};
+
static struct clk_alpha_pll ipq_pll_stromer_plus = {
.offset = 0x0,
.regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS],
@@ -144,8 +167,8 @@ struct apss_pll_data {
};
static const struct apss_pll_data ipq5018_pll_data = {
- .pll_type = CLK_ALPHA_PLL_TYPE_STROMER_PLUS,
- .pll = &ipq_pll_stromer_plus,
+ .pll_type = CLK_ALPHA_PLL_TYPE_STROMER,
+ .pll = &ipq_pll_stromer,
.pll_config = &ipq5018_pll_config,
};
@@ -203,7 +226,8 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
if (data->pll_type == CLK_ALPHA_PLL_TYPE_HUAYRA)
clk_alpha_pll_configure(data->pll, regmap, data->pll_config);
- else if (data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER_PLUS)
+ else if (data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER ||
+ data->pll_type == CLK_ALPHA_PLL_TYPE_STROMER_PLUS)
clk_stromer_pll_configure(data->pll, regmap, data->pll_config);
ret = devm_clk_register_regmap(dev, &data->pll->clkr);
---
base-commit: e8f897f4afef0031fe618a8e94127a0934896aba
change-id: 20240311-apss-ipq-pll-ipq5018-hang-74d9a8f47136
Best regards,
--
Gabor Juhos <j4g8y7(a)gmail.com>
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 1e560864159d002b453da42bd2c13a1805515a20
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024021334-each-residence-41ce@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
1e560864159d ("PCI/ASPM: Fix deadlock when enabling ASPM")
ac865f00af29 ("Merge tag 'pci-v6.7-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1e560864159d002b453da42bd2c13a1805515a20 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan+linaro(a)kernel.org>
Date: Tue, 30 Jan 2024 11:02:43 +0100
Subject: [PATCH] PCI/ASPM: Fix deadlock when enabling ASPM
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com>
Cc: <stable(a)vger.kernel.org> # 6.7
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 9c2137dae429..826b5016a101 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -386,21 +386,8 @@ void pci_bus_add_devices(const struct pci_bus *bus)
}
EXPORT_SYMBOL(pci_bus_add_devices);
-/** pci_walk_bus - walk devices on/under bus, calling callback.
- * @top bus whose devices should be walked
- * @cb callback to be called for each device found
- * @userdata arbitrary pointer to be passed to callback.
- *
- * Walk the given bus, including any bridged devices
- * on buses under this bus. Call the provided callback
- * on each device found.
- *
- * We check the return of @cb each time. If it returns anything
- * other than 0, we break out.
- *
- */
-void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
- void *userdata)
+static void __pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+ void *userdata, bool locked)
{
struct pci_dev *dev;
struct pci_bus *bus;
@@ -408,7 +395,8 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
int retval;
bus = top;
- down_read(&pci_bus_sem);
+ if (!locked)
+ down_read(&pci_bus_sem);
next = top->devices.next;
for (;;) {
if (next == &bus->devices) {
@@ -431,10 +419,37 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
if (retval)
break;
}
- up_read(&pci_bus_sem);
+ if (!locked)
+ up_read(&pci_bus_sem);
+}
+
+/**
+ * pci_walk_bus - walk devices on/under bus, calling callback.
+ * @top: bus whose devices should be walked
+ * @cb: callback to be called for each device found
+ * @userdata: arbitrary pointer to be passed to callback
+ *
+ * Walk the given bus, including any bridged devices
+ * on buses under this bus. Call the provided callback
+ * on each device found.
+ *
+ * We check the return of @cb each time. If it returns anything
+ * other than 0, we break out.
+ */
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+ __pci_walk_bus(top, cb, userdata, false);
}
EXPORT_SYMBOL_GPL(pci_walk_bus);
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+ lockdep_assert_held(&pci_bus_sem);
+
+ __pci_walk_bus(top, cb, userdata, true);
+}
+EXPORT_SYMBOL_GPL(pci_walk_bus_locked);
+
struct pci_bus *pci_bus_get(struct pci_bus *bus)
{
if (bus)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 10f2d0bb86be..2ce2a3bd932b 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -972,7 +972,7 @@ static int qcom_pcie_enable_aspm(struct pci_dev *pdev, void *userdata)
* Downstream devices need to be in D0 state before enabling PCI PM
* substates.
*/
- pci_set_power_state(pdev, PCI_D0);
+ pci_set_power_state_locked(pdev, PCI_D0);
pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL);
return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d8f11a078924..9ab9b1008d8b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1354,6 +1354,7 @@ int pci_power_up(struct pci_dev *dev)
/**
* pci_set_full_power_state - Put a PCI device into D0 and update its state
* @dev: PCI device to power up
+ * @locked: whether pci_bus_sem is held
*
* Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register
* to confirm the state change, restore its BARs if they might be lost and
@@ -1363,7 +1364,7 @@ int pci_power_up(struct pci_dev *dev)
* to D0, it is more efficient to use pci_power_up() directly instead of this
* function.
*/
-static int pci_set_full_power_state(struct pci_dev *dev)
+static int pci_set_full_power_state(struct pci_dev *dev, bool locked)
{
u16 pmcsr;
int ret;
@@ -1399,7 +1400,7 @@ static int pci_set_full_power_state(struct pci_dev *dev)
}
if (dev->bus->self)
- pcie_aspm_pm_state_change(dev->bus->self);
+ pcie_aspm_pm_state_change(dev->bus->self, locked);
return 0;
}
@@ -1428,10 +1429,22 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
pci_walk_bus(bus, __pci_dev_set_current_state, &state);
}
+static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state, bool locked)
+{
+ if (!bus)
+ return;
+
+ if (locked)
+ pci_walk_bus_locked(bus, __pci_dev_set_current_state, &state);
+ else
+ pci_walk_bus(bus, __pci_dev_set_current_state, &state);
+}
+
/**
* pci_set_low_power_state - Put a PCI device into a low-power state.
* @dev: PCI device to handle.
* @state: PCI power state (D1, D2, D3hot) to put the device into.
+ * @locked: whether pci_bus_sem is held
*
* Use the device's PCI_PM_CTRL register to put it into a low-power state.
*
@@ -1442,7 +1455,7 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
* 0 if device already is in the requested state.
* 0 if device's power state has been successfully changed.
*/
-static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
+static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
{
u16 pmcsr;
@@ -1496,29 +1509,12 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
pci_power_name(state));
if (dev->bus->self)
- pcie_aspm_pm_state_change(dev->bus->self);
+ pcie_aspm_pm_state_change(dev->bus->self, locked);
return 0;
}
-/**
- * pci_set_power_state - Set the power state of a PCI device
- * @dev: PCI device to handle.
- * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
- *
- * Transition a device to a new power state, using the platform firmware and/or
- * the device's PCI PM registers.
- *
- * RETURN VALUE:
- * -EINVAL if the requested state is invalid.
- * -EIO if device does not support PCI PM or its PM capabilities register has a
- * wrong version, or device doesn't support the requested state.
- * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
- * 0 if device already is in the requested state.
- * 0 if the transition is to D3 but D3 is not supported.
- * 0 if device's power state has been successfully changed.
- */
-int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+static int __pci_set_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
{
int error;
@@ -1542,7 +1538,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
if (state == PCI_D0)
- return pci_set_full_power_state(dev);
+ return pci_set_full_power_state(dev, locked);
/*
* This device is quirked not to be put into D3, so don't put it in
@@ -1556,16 +1552,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
* To put the device in D3cold, put it into D3hot in the native
* way, then put it into D3cold using platform ops.
*/
- error = pci_set_low_power_state(dev, PCI_D3hot);
+ error = pci_set_low_power_state(dev, PCI_D3hot, locked);
if (pci_platform_power_transition(dev, PCI_D3cold))
return error;
/* Powering off a bridge may power off the whole hierarchy */
if (dev->current_state == PCI_D3cold)
- pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+ __pci_bus_set_current_state(dev->subordinate, PCI_D3cold, locked);
} else {
- error = pci_set_low_power_state(dev, state);
+ error = pci_set_low_power_state(dev, state, locked);
if (pci_platform_power_transition(dev, state))
return error;
@@ -1573,8 +1569,38 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
}
+
+/**
+ * pci_set_power_state - Set the power state of a PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * Transition a device to a new power state, using the platform firmware and/or
+ * the device's PCI PM registers.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
+ * 0 if device already is in the requested state.
+ * 0 if the transition is to D3 but D3 is not supported.
+ * 0 if device's power state has been successfully changed.
+ */
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+ return __pci_set_power_state(dev, state, false);
+}
EXPORT_SYMBOL(pci_set_power_state);
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{
+ lockdep_assert_held(&pci_bus_sem);
+
+ return __pci_set_power_state(dev, state, true);
+}
+EXPORT_SYMBOL(pci_set_power_state_locked);
+
#define PCI_EXP_SAVE_REGS 7
static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev,
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 2336a8d1edab..e9750b1b19ba 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -571,12 +571,12 @@ int pcie_retrain_link(struct pci_dev *pdev, bool use_lt);
#ifdef CONFIG_PCIEASPM
void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-void pcie_aspm_pm_state_change(struct pci_dev *pdev);
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked);
void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
-static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
+static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) { }
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
#endif
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 5a0066ecc3c5..bc0bd86695ec 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1003,8 +1003,11 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
up_read(&pci_bus_sem);
}
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
+/*
+ * @pdev: the root port or switch downstream port
+ * @locked: whether pci_bus_sem is held
+ */
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked)
{
struct pcie_link_state *link = pdev->link_state;
@@ -1014,12 +1017,14 @@ void pcie_aspm_pm_state_change(struct pci_dev *pdev)
* Devices changed PM state, we should recheck if latency
* meets all functions' requirement
*/
- down_read(&pci_bus_sem);
+ if (!locked)
+ down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
pcie_update_aspm_capable(link->root);
pcie_config_aspm_path(link);
mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
+ if (!locked)
+ up_read(&pci_bus_sem);
}
void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index add9368e6314..7ab0d13672da 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1422,6 +1422,7 @@ int pci_load_and_free_saved_state(struct pci_dev *dev,
struct pci_saved_state **state);
int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state);
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
void pci_pme_active(struct pci_dev *dev, bool enable);
@@ -1625,6 +1626,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
void *userdata);
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+ void *userdata);
int pci_cfg_space_size(struct pci_dev *dev);
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
void pci_setup_bridge(struct pci_bus *bus);
@@ -2025,6 +2028,8 @@ static inline int pci_save_state(struct pci_dev *dev) { return 0; }
static inline void pci_restore_state(struct pci_dev *dev) { }
static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{ return 0; }
+static inline int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{ return 0; }
static inline int pci_wake_from_d3(struct pci_dev *dev, bool enable)
{ return 0; }
static inline pci_power_t pci_choose_state(struct pci_dev *dev,
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 1e560864159d002b453da42bd2c13a1805515a20
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024021328-stylus-ooze-f752@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
1e560864159d ("PCI/ASPM: Fix deadlock when enabling ASPM")
ac865f00af29 ("Merge tag 'pci-v6.7-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1e560864159d002b453da42bd2c13a1805515a20 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan+linaro(a)kernel.org>
Date: Tue, 30 Jan 2024 11:02:43 +0100
Subject: [PATCH] PCI/ASPM: Fix deadlock when enabling ASPM
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com>
Cc: <stable(a)vger.kernel.org> # 6.7
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 9c2137dae429..826b5016a101 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -386,21 +386,8 @@ void pci_bus_add_devices(const struct pci_bus *bus)
}
EXPORT_SYMBOL(pci_bus_add_devices);
-/** pci_walk_bus - walk devices on/under bus, calling callback.
- * @top bus whose devices should be walked
- * @cb callback to be called for each device found
- * @userdata arbitrary pointer to be passed to callback.
- *
- * Walk the given bus, including any bridged devices
- * on buses under this bus. Call the provided callback
- * on each device found.
- *
- * We check the return of @cb each time. If it returns anything
- * other than 0, we break out.
- *
- */
-void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
- void *userdata)
+static void __pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+ void *userdata, bool locked)
{
struct pci_dev *dev;
struct pci_bus *bus;
@@ -408,7 +395,8 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
int retval;
bus = top;
- down_read(&pci_bus_sem);
+ if (!locked)
+ down_read(&pci_bus_sem);
next = top->devices.next;
for (;;) {
if (next == &bus->devices) {
@@ -431,10 +419,37 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
if (retval)
break;
}
- up_read(&pci_bus_sem);
+ if (!locked)
+ up_read(&pci_bus_sem);
+}
+
+/**
+ * pci_walk_bus - walk devices on/under bus, calling callback.
+ * @top: bus whose devices should be walked
+ * @cb: callback to be called for each device found
+ * @userdata: arbitrary pointer to be passed to callback
+ *
+ * Walk the given bus, including any bridged devices
+ * on buses under this bus. Call the provided callback
+ * on each device found.
+ *
+ * We check the return of @cb each time. If it returns anything
+ * other than 0, we break out.
+ */
+void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+ __pci_walk_bus(top, cb, userdata, false);
}
EXPORT_SYMBOL_GPL(pci_walk_bus);
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata)
+{
+ lockdep_assert_held(&pci_bus_sem);
+
+ __pci_walk_bus(top, cb, userdata, true);
+}
+EXPORT_SYMBOL_GPL(pci_walk_bus_locked);
+
struct pci_bus *pci_bus_get(struct pci_bus *bus)
{
if (bus)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 10f2d0bb86be..2ce2a3bd932b 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -972,7 +972,7 @@ static int qcom_pcie_enable_aspm(struct pci_dev *pdev, void *userdata)
* Downstream devices need to be in D0 state before enabling PCI PM
* substates.
*/
- pci_set_power_state(pdev, PCI_D0);
+ pci_set_power_state_locked(pdev, PCI_D0);
pci_enable_link_state_locked(pdev, PCIE_LINK_STATE_ALL);
return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d8f11a078924..9ab9b1008d8b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1354,6 +1354,7 @@ int pci_power_up(struct pci_dev *dev)
/**
* pci_set_full_power_state - Put a PCI device into D0 and update its state
* @dev: PCI device to power up
+ * @locked: whether pci_bus_sem is held
*
* Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register
* to confirm the state change, restore its BARs if they might be lost and
@@ -1363,7 +1364,7 @@ int pci_power_up(struct pci_dev *dev)
* to D0, it is more efficient to use pci_power_up() directly instead of this
* function.
*/
-static int pci_set_full_power_state(struct pci_dev *dev)
+static int pci_set_full_power_state(struct pci_dev *dev, bool locked)
{
u16 pmcsr;
int ret;
@@ -1399,7 +1400,7 @@ static int pci_set_full_power_state(struct pci_dev *dev)
}
if (dev->bus->self)
- pcie_aspm_pm_state_change(dev->bus->self);
+ pcie_aspm_pm_state_change(dev->bus->self, locked);
return 0;
}
@@ -1428,10 +1429,22 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
pci_walk_bus(bus, __pci_dev_set_current_state, &state);
}
+static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state, bool locked)
+{
+ if (!bus)
+ return;
+
+ if (locked)
+ pci_walk_bus_locked(bus, __pci_dev_set_current_state, &state);
+ else
+ pci_walk_bus(bus, __pci_dev_set_current_state, &state);
+}
+
/**
* pci_set_low_power_state - Put a PCI device into a low-power state.
* @dev: PCI device to handle.
* @state: PCI power state (D1, D2, D3hot) to put the device into.
+ * @locked: whether pci_bus_sem is held
*
* Use the device's PCI_PM_CTRL register to put it into a low-power state.
*
@@ -1442,7 +1455,7 @@ void pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
* 0 if device already is in the requested state.
* 0 if device's power state has been successfully changed.
*/
-static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
+static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
{
u16 pmcsr;
@@ -1496,29 +1509,12 @@ static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state)
pci_power_name(state));
if (dev->bus->self)
- pcie_aspm_pm_state_change(dev->bus->self);
+ pcie_aspm_pm_state_change(dev->bus->self, locked);
return 0;
}
-/**
- * pci_set_power_state - Set the power state of a PCI device
- * @dev: PCI device to handle.
- * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
- *
- * Transition a device to a new power state, using the platform firmware and/or
- * the device's PCI PM registers.
- *
- * RETURN VALUE:
- * -EINVAL if the requested state is invalid.
- * -EIO if device does not support PCI PM or its PM capabilities register has a
- * wrong version, or device doesn't support the requested state.
- * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
- * 0 if device already is in the requested state.
- * 0 if the transition is to D3 but D3 is not supported.
- * 0 if device's power state has been successfully changed.
- */
-int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+static int __pci_set_power_state(struct pci_dev *dev, pci_power_t state, bool locked)
{
int error;
@@ -1542,7 +1538,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
if (state == PCI_D0)
- return pci_set_full_power_state(dev);
+ return pci_set_full_power_state(dev, locked);
/*
* This device is quirked not to be put into D3, so don't put it in
@@ -1556,16 +1552,16 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
* To put the device in D3cold, put it into D3hot in the native
* way, then put it into D3cold using platform ops.
*/
- error = pci_set_low_power_state(dev, PCI_D3hot);
+ error = pci_set_low_power_state(dev, PCI_D3hot, locked);
if (pci_platform_power_transition(dev, PCI_D3cold))
return error;
/* Powering off a bridge may power off the whole hierarchy */
if (dev->current_state == PCI_D3cold)
- pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+ __pci_bus_set_current_state(dev->subordinate, PCI_D3cold, locked);
} else {
- error = pci_set_low_power_state(dev, state);
+ error = pci_set_low_power_state(dev, state, locked);
if (pci_platform_power_transition(dev, state))
return error;
@@ -1573,8 +1569,38 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
}
+
+/**
+ * pci_set_power_state - Set the power state of a PCI device
+ * @dev: PCI device to handle.
+ * @state: PCI power state (D0, D1, D2, D3hot) to put the device into.
+ *
+ * Transition a device to a new power state, using the platform firmware and/or
+ * the device's PCI PM registers.
+ *
+ * RETURN VALUE:
+ * -EINVAL if the requested state is invalid.
+ * -EIO if device does not support PCI PM or its PM capabilities register has a
+ * wrong version, or device doesn't support the requested state.
+ * 0 if the transition is to D1 or D2 but D1 and D2 are not supported.
+ * 0 if device already is in the requested state.
+ * 0 if the transition is to D3 but D3 is not supported.
+ * 0 if device's power state has been successfully changed.
+ */
+int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
+{
+ return __pci_set_power_state(dev, state, false);
+}
EXPORT_SYMBOL(pci_set_power_state);
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{
+ lockdep_assert_held(&pci_bus_sem);
+
+ return __pci_set_power_state(dev, state, true);
+}
+EXPORT_SYMBOL(pci_set_power_state_locked);
+
#define PCI_EXP_SAVE_REGS 7
static struct pci_cap_saved_state *_pci_find_saved_cap(struct pci_dev *pci_dev,
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 2336a8d1edab..e9750b1b19ba 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -571,12 +571,12 @@ int pcie_retrain_link(struct pci_dev *pdev, bool use_lt);
#ifdef CONFIG_PCIEASPM
void pcie_aspm_init_link_state(struct pci_dev *pdev);
void pcie_aspm_exit_link_state(struct pci_dev *pdev);
-void pcie_aspm_pm_state_change(struct pci_dev *pdev);
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked);
void pcie_aspm_powersave_config_link(struct pci_dev *pdev);
#else
static inline void pcie_aspm_init_link_state(struct pci_dev *pdev) { }
static inline void pcie_aspm_exit_link_state(struct pci_dev *pdev) { }
-static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
+static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked) { }
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
#endif
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 5a0066ecc3c5..bc0bd86695ec 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1003,8 +1003,11 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev)
up_read(&pci_bus_sem);
}
-/* @pdev: the root port or switch downstream port */
-void pcie_aspm_pm_state_change(struct pci_dev *pdev)
+/*
+ * @pdev: the root port or switch downstream port
+ * @locked: whether pci_bus_sem is held
+ */
+void pcie_aspm_pm_state_change(struct pci_dev *pdev, bool locked)
{
struct pcie_link_state *link = pdev->link_state;
@@ -1014,12 +1017,14 @@ void pcie_aspm_pm_state_change(struct pci_dev *pdev)
* Devices changed PM state, we should recheck if latency
* meets all functions' requirement
*/
- down_read(&pci_bus_sem);
+ if (!locked)
+ down_read(&pci_bus_sem);
mutex_lock(&aspm_lock);
pcie_update_aspm_capable(link->root);
pcie_config_aspm_path(link);
mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
+ if (!locked)
+ up_read(&pci_bus_sem);
}
void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index add9368e6314..7ab0d13672da 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1422,6 +1422,7 @@ int pci_load_and_free_saved_state(struct pci_dev *dev,
struct pci_saved_state **state);
int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state);
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
+int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
bool pci_pme_capable(struct pci_dev *dev, pci_power_t state);
void pci_pme_active(struct pci_dev *dev, bool enable);
@@ -1625,6 +1626,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max,
void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
void *userdata);
+void pci_walk_bus_locked(struct pci_bus *top, int (*cb)(struct pci_dev *, void *),
+ void *userdata);
int pci_cfg_space_size(struct pci_dev *dev);
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
void pci_setup_bridge(struct pci_bus *bus);
@@ -2025,6 +2028,8 @@ static inline int pci_save_state(struct pci_dev *dev) { return 0; }
static inline void pci_restore_state(struct pci_dev *dev) { }
static inline int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{ return 0; }
+static inline int pci_set_power_state_locked(struct pci_dev *dev, pci_power_t state)
+{ return 0; }
static inline int pci_wake_from_d3(struct pci_dev *dev, bool enable)
{ return 0; }
static inline pci_power_t pci_choose_state(struct pci_dev *dev,
From: Charles Keepax <ckeepax(a)opensource.cirrus.com>
[ Upstream commit 6588732445ff19f6183f0fa72ddedf67e5a5be32 ]
MIPS appears to define a RST symbol at a high level, which clashes
with some register naming in the driver. Since there is currently
no case for running this driver on MIPS devices simply cut off the
build of this driver on MIPS.
Reported-by: kernel test robot <lkp(a)intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311071303.JJMAOjy4-lkp@intel.com/
Suggested-by: Linus Walleij <linus.walleij(a)linaro.org>
Signed-off-by: Charles Keepax <ckeepax(a)opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231115162853.1891940-1-ckeepax@opensource.cirru…
Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/pinctrl/cirrus/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/cirrus/Kconfig b/drivers/pinctrl/cirrus/Kconfig
index 530426a74f751..b3cea8d56c4f6 100644
--- a/drivers/pinctrl/cirrus/Kconfig
+++ b/drivers/pinctrl/cirrus/Kconfig
@@ -1,7 +1,8 @@
# SPDX-License-Identifier: GPL-2.0-only
config PINCTRL_LOCHNAGAR
tristate "Cirrus Logic Lochnagar pinctrl driver"
- depends on MFD_LOCHNAGAR
+ # Avoid clash caused by MIPS defining RST, which is used in the driver
+ depends on MFD_LOCHNAGAR && !MIPS
select GPIOLIB
select PINMUX
select PINCONF
--
2.42.0
The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x ea73179e64131bcd29ba6defd33732abdf8ca14b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024021902-authentic-handpick-da09@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..
Possible dependencies:
ea73179e6413 ("powerpc/ftrace: Ignore ftrace locations in exit text sections")
2ec36570c358 ("powerpc/ftrace: Fix indentation in ftrace.h")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ea73179e64131bcd29ba6defd33732abdf8ca14b Mon Sep 17 00:00:00 2001
From: Naveen N Rao <naveen(a)kernel.org>
Date: Tue, 13 Feb 2024 23:24:10 +0530
Subject: [PATCH] powerpc/ftrace: Ignore ftrace locations in exit text sections
Michael reported that we are seeing an ftrace bug on bootup when KASAN
is enabled and we are using -fpatchable-function-entry:
ftrace: allocating 47780 entries in 18 pages
ftrace-powerpc: 0xc0000000020b3d5c: No module provided for non-kernel address
------------[ ftrace bug ]------------
ftrace faulted on modifying
[<c0000000020b3d5c>] 0xc0000000020b3d5c
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c00000000008cef4
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2180 ftrace_bug+0x3c0/0x424
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-00120-g0f71dcfb4aef #860
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000003aa81c LR: c0000000003aa818 CTR: 0000000000000000
REGS: c0000000033cfab0 TRAP: 0700 Not tainted (6.5.0-rc3-00120-g0f71dcfb4aef)
MSR: 8000000002021033 <SF,VEC,ME,IR,DR,RI,LE> CR: 28028240 XER: 00000000
CFAR: c0000000002781a8 IRQMASK: 3
...
NIP [c0000000003aa81c] ftrace_bug+0x3c0/0x424
LR [c0000000003aa818] ftrace_bug+0x3bc/0x424
Call Trace:
ftrace_bug+0x3bc/0x424 (unreliable)
ftrace_process_locs+0x5f4/0x8a0
ftrace_init+0xc0/0x1d0
start_kernel+0x1d8/0x484
With CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y and
CONFIG_KASAN=y, compiler emits nops in functions that it generates for
registering and unregistering global variables (unlike with -pg and
-mprofile-kernel where calls to _mcount() are not generated in those
functions). Those functions then end up in INIT_TEXT and EXIT_TEXT
respectively. We don't expect to see any profiled functions in
EXIT_TEXT, so ftrace_init_nop() assumes that all addresses that aren't
in the core kernel text belongs to a module. Since these functions do
not match that criteria, we see the above bug.
Address this by having ftrace ignore all locations in the text exit
sections of vmlinux.
Fixes: 0f71dcfb4aef ("powerpc/ftrace: Add support for -fpatchable-function-entry")
Cc: stable(a)vger.kernel.org # v6.6+
Reported-by: Michael Ellerman <mpe(a)ellerman.id.au>
Signed-off-by: Naveen N Rao <naveen(a)kernel.org>
Reviewed-by: Benjamin Gray <bgray(a)linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au>
Link: https://msgid.link/20240213175410.1091313-1-naveen@kernel.org
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index 1ebd2ca97f12..107fc5a48456 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -20,14 +20,6 @@
#ifndef __ASSEMBLY__
extern void _mcount(void);
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
- if (IS_ENABLED(CONFIG_ARCH_USING_PATCHABLE_FUNCTION_ENTRY))
- addr += MCOUNT_INSN_SIZE;
-
- return addr;
-}
-
unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip,
unsigned long sp);
@@ -142,8 +134,10 @@ static inline u8 this_cpu_get_ftrace_enabled(void) { return 1; }
#ifdef CONFIG_FUNCTION_TRACER
extern unsigned int ftrace_tramp_text[], ftrace_tramp_init[];
void ftrace_free_init_tramp(void);
+unsigned long ftrace_call_adjust(unsigned long addr);
#else
static inline void ftrace_free_init_tramp(void) { }
+static inline unsigned long ftrace_call_adjust(unsigned long addr) { return addr; }
#endif
#endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index ea26665f82cf..f43f3a6b0051 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -14,6 +14,7 @@ typedef struct func_desc func_desc_t;
extern char __head_end[];
extern char __srwx_boundary[];
+extern char __exittext_begin[], __exittext_end[];
/* Patch sites */
extern s32 patch__call_flush_branch_caches1;
diff --git a/arch/powerpc/kernel/trace/ftrace.c b/arch/powerpc/kernel/trace/ftrace.c
index 82010629cf88..d8d6b4fd9a14 100644
--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@@ -27,10 +27,22 @@
#include <asm/ftrace.h>
#include <asm/syscall.h>
#include <asm/inst.h>
+#include <asm/sections.h>
#define NUM_FTRACE_TRAMPS 2
static unsigned long ftrace_tramps[NUM_FTRACE_TRAMPS];
+unsigned long ftrace_call_adjust(unsigned long addr)
+{
+ if (addr >= (unsigned long)__exittext_begin && addr < (unsigned long)__exittext_end)
+ return 0;
+
+ if (IS_ENABLED(CONFIG_ARCH_USING_PATCHABLE_FUNCTION_ENTRY))
+ addr += MCOUNT_INSN_SIZE;
+
+ return addr;
+}
+
static ppc_inst_t ftrace_create_branch_inst(unsigned long ip, unsigned long addr, int link)
{
ppc_inst_t op;
diff --git a/arch/powerpc/kernel/trace/ftrace_64_pg.c b/arch/powerpc/kernel/trace/ftrace_64_pg.c
index 7b85c3b460a3..12fab1803bcf 100644
--- a/arch/powerpc/kernel/trace/ftrace_64_pg.c
+++ b/arch/powerpc/kernel/trace/ftrace_64_pg.c
@@ -37,6 +37,11 @@
#define NUM_FTRACE_TRAMPS 8
static unsigned long ftrace_tramps[NUM_FTRACE_TRAMPS];
+unsigned long ftrace_call_adjust(unsigned long addr)
+{
+ return addr;
+}
+
static ppc_inst_t
ftrace_call_replace(unsigned long ip, unsigned long addr, int link)
{
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 1c5970df3233..f420df7888a7 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -281,7 +281,9 @@ SECTIONS
* to deal with references from __bug_table
*/
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+ __exittext_begin = .;
EXIT_TEXT
+ __exittext_end = .;
}
. = ALIGN(PAGE_SIZE);