November 2024 - Linux-stable-mirror

[PATCH] drm/bridge: it6505: Fix inverted reset polarity

by Chen-Yu Tsai

The IT6505 bridge chip has a active low reset line. Since it is a "reset" and not an "enable" line, the GPIO should be asserted to put it in reset and deasserted to bring it out of reset during the power on sequence. The polarity was inverted when the driver was first introduced, likely because the device family that was targeted had an inverting level shifter on the reset line. The MT8186 Corsola devices already have the IT6505 in their device tree, but the whole display pipeline is actually disabled and won't be enabled until some remaining issues are sorted out. The other known user is the MT8183 Kukui / Jacuzzi family; their device trees currently do not have the IT6505 included. Fix the polarity in the driver while there are no actual users. Fixes: b5c84a9edcd4 ("drm/bridge: add it6505 driver") Cc: <stable(a)vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wenst(a)chromium.org> --- drivers/gpu/drm/bridge/ite-it6505.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c index 7502a5f81557..df7ecdf0f422 100644 --- a/drivers/gpu/drm/bridge/ite-it6505.c +++ b/drivers/gpu/drm/bridge/ite-it6505.c @@ -2618,9 +2618,9 @@ static int it6505_poweron(struct it6505 *it6505) /* time interval between OVDD and SYSRSTN at least be 10ms */ if (pdata->gpiod_reset) { usleep_range(10000, 20000); - gpiod_set_value_cansleep(pdata->gpiod_reset, 0); - usleep_range(1000, 2000); gpiod_set_value_cansleep(pdata->gpiod_reset, 1); + usleep_range(1000, 2000); + gpiod_set_value_cansleep(pdata->gpiod_reset, 0); usleep_range(25000, 35000); } @@ -2651,7 +2651,7 @@ static int it6505_poweroff(struct it6505 *it6505) disable_irq_nosync(it6505->irq); if (pdata->gpiod_reset) - gpiod_set_value_cansleep(pdata->gpiod_reset, 0); + gpiod_set_value_cansleep(pdata->gpiod_reset, 1); if (pdata->pwr18) { err = regulator_disable(pdata->pwr18); @@ -3205,7 +3205,7 @@ static int it6505_init_pdata(struct it6505 *it6505) return PTR_ERR(pdata->ovdd); } - pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(pdata->gpiod_reset)) { dev_err(dev, "gpiod_reset gpio not found"); return PTR_ERR(pdata->gpiod_reset); -- 2.47.0.163.g1226f6d8fa-goog

5 months, 3 weeks

3
3
0 0

[PATCH 0/2] drm/mediatek: Fix child node refcount handling and use scoped macro

by Javier Carrasco

This series fixes a wrong handling of the child node within the for_each_child_of_node() by adding the missing call to of_node_put() to make it compatible with stable kernels that don't provide the scoped variant of the macro, which is more secure and was introduced early this year. Signed-off-by: Javier Carrasco <javier.carrasco.cruz(a)gmail.com> --- Javier Carrasco (2): drm/mediatek: Fix child node refcount handling in early exit drm/mediatek: Switch to for_each_child_of_node_scoped() drivers/gpu/drm/mediatek/mtk_drm_drv.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- base-commit: d61a00525464bfc5fe92c6ad713350988e492b88 change-id: 20241011-mtk_drm_drv_memleak-5e8b8e45ed1c Best regards, -- Javier Carrasco <javier.carrasco.cruz(a)gmail.com>

5 months, 3 weeks

5
5
0 0

[PATCH v5 1/3] drm/xe: Move LNL scheduling WA to xe_device.h

by Nirmoy Das

Move LNL scheduling WA to xe_device.h so this can be used in other places without needing keep the same comment about removal of this WA in the future. The WA, which flushes work or workqueues, is now wrapped in macros and can be reused wherever needed. Cc: Badal Nilawar <badal.nilawar(a)intel.com> Cc: Matthew Auld <matthew.auld(a)intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray(a)intel.com> Cc: Lucas De Marchi <lucas.demarchi(a)intel.com> cc: <stable(a)vger.kernel.org> # v6.11+ Suggested-by: John Harrison <John.C.Harrison(a)Intel.com> Signed-off-by: Nirmoy Das <nirmoy.das(a)intel.com> --- drivers/gpu/drm/xe/xe_device.h | 14 ++++++++++++++ drivers/gpu/drm/xe/xe_guc_ct.c | 11 +---------- 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_device.h b/drivers/gpu/drm/xe/xe_device.h index 4c3f0ebe78a9..f1fbfe916867 100644 --- a/drivers/gpu/drm/xe/xe_device.h +++ b/drivers/gpu/drm/xe/xe_device.h @@ -191,4 +191,18 @@ void xe_device_declare_wedged(struct xe_device *xe); struct xe_file *xe_file_get(struct xe_file *xef); void xe_file_put(struct xe_file *xef); +/* + * Occasionally it is seen that the G2H worker starts running after a delay of more than + * a second even after being queued and activated by the Linux workqueue subsystem. This + * leads to G2H timeout error. The root cause of issue lies with scheduling latency of + * Lunarlake Hybrid CPU. Issue disappears if we disable Lunarlake atom cores from BIOS + * and this is beyond xe kmd. + * + * TODO: Drop this change once workqueue scheduling delay issue is fixed on LNL Hybrid CPU. + */ +#define LNL_FLUSH_WORKQUEUE(wq__) \ + flush_workqueue(wq__) +#define LNL_FLUSH_WORK(wrk__) \ + flush_work(wrk__) + #endif diff --git a/drivers/gpu/drm/xe/xe_guc_ct.c b/drivers/gpu/drm/xe/xe_guc_ct.c index 1b5d8fb1033a..703b44b257a7 100644 --- a/drivers/gpu/drm/xe/xe_guc_ct.c +++ b/drivers/gpu/drm/xe/xe_guc_ct.c @@ -1018,17 +1018,8 @@ static int guc_ct_send_recv(struct xe_guc_ct *ct, const u32 *action, u32 len, ret = wait_event_timeout(ct->g2h_fence_wq, g2h_fence.done, HZ); - /* - * Occasionally it is seen that the G2H worker starts running after a delay of more than - * a second even after being queued and activated by the Linux workqueue subsystem. This - * leads to G2H timeout error. The root cause of issue lies with scheduling latency of - * Lunarlake Hybrid CPU. Issue dissappears if we disable Lunarlake atom cores from BIOS - * and this is beyond xe kmd. - * - * TODO: Drop this change once workqueue scheduling delay issue is fixed on LNL Hybrid CPU. - */ if (!ret) { - flush_work(&ct->g2h_worker); + LNL_FLUSH_WORK(&ct->g2h_worker); if (g2h_fence.done) { xe_gt_warn(gt, "G2H fence %u, action %04x, done\n", g2h_fence.seqno, action[0]); -- 2.46.0

5 months, 3 weeks

5
13
0 0

[PATCH v2] usb: typec: Drop reference to a fwnode

by Joe Hattori

In typec_port_register_altmodes(), the fwnode reference obtained by device_get_named_child_node() is not dropped. This commit adds a call to fwnode_handle_put() to fix the possible reference leak. Fixes: 7b458a4c5d73 ("usb: typec: Add typec_port_register_altmodes()") Cc: stable(a)vger.kernel.org Signed-off-by: Joe Hattori <joe(a)pf.is.s.u-tokyo.ac.jp> --- Changes in v2: - Add the Cc: stable(a)vger.kernel.org line. --- drivers/usb/typec/class.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 58f40156de56..145e12e13aef 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -2343,6 +2343,7 @@ void typec_port_register_altmodes(struct typec_port *port, altmodes[index] = alt; index++; } + fwnode_handle_put(altmodes_node); } EXPORT_SYMBOL_GPL(typec_port_register_altmodes); -- 2.34.1

5 months, 3 weeks

3
2
0 0

Re: Patch "igb: Disable threaded IRQ for igb_msix_other" has been added to the 6.11-stable tree

by Sebastian Andrzej Siewior

On 2024-11-01 15:21:24 [-0400], Sasha Levin wrote: > commit 052382490ee4f0f6d783ddce02fe6f2d15e134b5 > Author: Wander Lairson Costa <wander(a)redhat.com> > Date: Mon Oct 21 16:26:24 2024 -0700 > > igb: Disable threaded IRQ for igb_msix_other > > [ Upstream commit 338c4d3902feb5be49bfda530a72c7ab860e2c9f ] > > During testing of SR-IOV, Red Hat QE encountered an issue where the > ip link up command intermittently fails for the igbvf interfaces when > using the PREEMPT_RT variant. Investigation revealed that > e1000_write_posted_mbx returns an error due to the lack of an ACK > from e1000_poll_for_ack. > > The underlying issue arises from the fact that IRQs are threaded by > default under PREEMPT_RT. While the exact hardware details are not > available, it appears that the IRQ handled by igb_msix_other must > be processed before e1000_poll_for_ack times out. However, > e1000_write_posted_mbx is called with preemption disabled, leading > to a scenario where the IRQ is serviced only after the failure of > e1000_write_posted_mbx. > > To resolve this, we set IRQF_NO_THREAD for the affected interrupt, > ensuring that the kernel handles it immediately, thereby preventing > the aforementioned error. Wander, please send a revert of this patch. The ISR (E1000_ICR_TS set) may invoke igb_msg_task(), ptp_clock_event(), igb_perout(), igb_extts() each of which acquire sleeping locks on PREEMPT_RT. Not sure if this improved the situation or not. Sebastian

5 months, 3 weeks

1
0
0 0

[PATCH AUTOSEL 4.19 1/5] ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet

by Sasha Levin

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 0107f28f135231da22a9ad5756bb16bd5cada4d5 ] The Vexia Edu Atla 10 tablet mostly uses the BYTCR tablet defaults, but as happens on more models it is using IN1 instead of IN3 for its internal mic and JD_SRC_JD2_IN4N instead of JD_SRC_JD1_IN4P for jack-detection. Add a DMI quirk for this to fix the internal-mic and jack-detection. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://patch.msgid.link/20241024211615.79518-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 16e2ab2903754..2ed63866e9cc6 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -879,6 +879,21 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, + { /* Vexia Edu Atla 10 tablet */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are too generic, also match on BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "08/25/2014"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | + BYT_RT5640_MCLK_EN), + }, { /* Voyo Winpad A15 */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), -- 2.43.0

5 months, 3 weeks

1
4
0 0

[PATCH AUTOSEL 5.4 1/6] ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet

by Sasha Levin

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 0107f28f135231da22a9ad5756bb16bd5cada4d5 ] The Vexia Edu Atla 10 tablet mostly uses the BYTCR tablet defaults, but as happens on more models it is using IN1 instead of IN3 for its internal mic and JD_SRC_JD2_IN4N instead of JD_SRC_JD1_IN4P for jack-detection. Add a DMI quirk for this to fix the internal-mic and jack-detection. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://patch.msgid.link/20241024211615.79518-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 057ecfe2c8b5c..53a15be38b56f 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -909,6 +909,21 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, + { /* Vexia Edu Atla 10 tablet */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are too generic, also match on BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "08/25/2014"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | + BYT_RT5640_MCLK_EN), + }, { /* Voyo Winpad A15 */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), -- 2.43.0

5 months, 3 weeks

1
5
0 0

[PATCH AUTOSEL 5.10 1/6] ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet

by Sasha Levin

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit 0107f28f135231da22a9ad5756bb16bd5cada4d5 ] The Vexia Edu Atla 10 tablet mostly uses the BYTCR tablet defaults, but as happens on more models it is using IN1 instead of IN3 for its internal mic and JD_SRC_JD2_IN4N instead of JD_SRC_JD1_IN4P for jack-detection. Add a DMI quirk for this to fix the internal-mic and jack-detection. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://patch.msgid.link/20241024211615.79518-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 47b581d99da67..6fc6a1fcd935e 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -935,6 +935,21 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { BYT_RT5640_SSP0_AIF2 | BYT_RT5640_MCLK_EN), }, + { /* Vexia Edu Atla 10 tablet */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are too generic, also match on BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "08/25/2014"), + }, + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | + BYT_RT5640_MCLK_EN), + }, { /* Voyo Winpad A15 */ .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), -- 2.43.0

5 months, 3 weeks

1
5
0 0

[PATCH AUTOSEL 5.15 01/10] ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec

by Sasha Levin

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit d48696b915527b5bcdd207a299aec03fb037eb17 ] On some x86 Bay Trail tablets which shipped with Android as factory OS, the DSDT is so broken that the codec needs to be manually instantatiated by the special x86-android-tablets.ko "fixup" driver for cases like this. This means that the codec-dev cannot be retrieved through its ACPI fwnode, add support to the bytcr_rt5640 machine driver for such manually instantiated rt5640 i2c_clients. An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet, which has been distributed to schools in the Spanish Andalucía region. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://patch.msgid.link/20241024211615.79518-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 33 ++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 3d2a0e8cad9a5..899a8435a1eb8 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -17,6 +17,7 @@ #include <linux/acpi.h> #include <linux/clk.h> #include <linux/device.h> +#include <linux/device/bus.h> #include <linux/dmi.h> #include <linux/gpio/consumer.h> #include <linux/gpio/machine.h> @@ -32,6 +33,8 @@ #include "../atom/sst-atom-controls.h" #include "../common/soc-intel-quirks.h" +#define BYT_RT5640_FALLBACK_CODEC_DEV_NAME "i2c-rt5640" + enum { BYT_RT5640_DMIC1_MAP, BYT_RT5640_DMIC2_MAP, @@ -1616,9 +1619,33 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) codec_dev = acpi_get_first_physical_node(adev); acpi_dev_put(adev); - if (!codec_dev) - return -EPROBE_DEFER; - priv->codec_dev = get_device(codec_dev); + + if (codec_dev) { + priv->codec_dev = get_device(codec_dev); + } else { + /* + * Special case for Android tablets where the codec i2c_client + * has been manually instantiated by x86_android_tablets.ko due + * to a broken DSDT. + */ + codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, + BYT_RT5640_FALLBACK_CODEC_DEV_NAME); + if (!codec_dev) + return -EPROBE_DEFER; + + if (!i2c_verify_client(codec_dev)) { + dev_err(dev, "Error '%s' is not an i2c_client\n", + BYT_RT5640_FALLBACK_CODEC_DEV_NAME); + put_device(codec_dev); + } + + /* fixup codec name */ + strscpy(byt_rt5640_codec_name, BYT_RT5640_FALLBACK_CODEC_DEV_NAME, + sizeof(byt_rt5640_codec_name)); + + /* bus_find_device() returns a reference no need to get() */ + priv->codec_dev = codec_dev; + } /* * swap SSP0 if bytcr is detected -- 2.43.0

5 months, 3 weeks

1
9
0 0

[PATCH AUTOSEL 6.1 01/11] ASoC: Intel: bytcr_rt5640: Add support for non ACPI instantiated codec

by Sasha Levin

From: Hans de Goede <hdegoede(a)redhat.com> [ Upstream commit d48696b915527b5bcdd207a299aec03fb037eb17 ] On some x86 Bay Trail tablets which shipped with Android as factory OS, the DSDT is so broken that the codec needs to be manually instantatiated by the special x86-android-tablets.ko "fixup" driver for cases like this. This means that the codec-dev cannot be retrieved through its ACPI fwnode, add support to the bytcr_rt5640 machine driver for such manually instantiated rt5640 i2c_clients. An example of a tablet which needs this is the Vexia EDU ATLA 10 tablet, which has been distributed to schools in the Spanish Andalucía region. Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Link: https://patch.msgid.link/20241024211615.79518-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- sound/soc/intel/boards/bytcr_rt5640.c | 33 ++++++++++++++++++++++++--- 1 file changed, 30 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index ff879e173d51d..7a57d7abd3803 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -17,6 +17,7 @@ #include <linux/acpi.h> #include <linux/clk.h> #include <linux/device.h> +#include <linux/device/bus.h> #include <linux/dmi.h> #include <linux/gpio/consumer.h> #include <linux/gpio/machine.h> @@ -32,6 +33,8 @@ #include "../atom/sst-atom-controls.h" #include "../common/soc-intel-quirks.h" +#define BYT_RT5640_FALLBACK_CODEC_DEV_NAME "i2c-rt5640" + enum { BYT_RT5640_DMIC1_MAP, BYT_RT5640_DMIC2_MAP, @@ -1687,9 +1690,33 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) codec_dev = acpi_get_first_physical_node(adev); acpi_dev_put(adev); - if (!codec_dev) - return -EPROBE_DEFER; - priv->codec_dev = get_device(codec_dev); + + if (codec_dev) { + priv->codec_dev = get_device(codec_dev); + } else { + /* + * Special case for Android tablets where the codec i2c_client + * has been manually instantiated by x86_android_tablets.ko due + * to a broken DSDT. + */ + codec_dev = bus_find_device_by_name(&i2c_bus_type, NULL, + BYT_RT5640_FALLBACK_CODEC_DEV_NAME); + if (!codec_dev) + return -EPROBE_DEFER; + + if (!i2c_verify_client(codec_dev)) { + dev_err(dev, "Error '%s' is not an i2c_client\n", + BYT_RT5640_FALLBACK_CODEC_DEV_NAME); + put_device(codec_dev); + } + + /* fixup codec name */ + strscpy(byt_rt5640_codec_name, BYT_RT5640_FALLBACK_CODEC_DEV_NAME, + sizeof(byt_rt5640_codec_name)); + + /* bus_find_device() returns a reference no need to get() */ + priv->codec_dev = codec_dev; + } /* * swap SSP0 if bytcr is detected -- 2.43.0

5 months, 3 weeks

1
10
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2024