October 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] serial: qcom-geni: fix false console tx restart" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x f97cdbbf187fefcf1fe19689cd9fdca11fe9c3eb # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100115-gorged-snare-6a95@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: f97cdbbf187f ("serial: qcom-geni: fix false console tx restart") 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo") f8fef2fa419f ("tty: msm_serial: use dmaengine_prep_slave_sg()") 9054605ab846 ("tty: 8250_omap: use dmaengine_prep_slave_sg()") 8192fabb0db2 ("tty: 8250_dma: use dmaengine_prep_slave_sg()") 3bcb0bf65c2b ("Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f97cdbbf187fefcf1fe19689cd9fdca11fe9c3eb Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 6 Sep 2024 15:13:30 +0200 Subject: [PATCH] serial: qcom-geni: fix false console tx restart MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang") addressed an issue with stalled tx after the console code interrupted the last bytes of a tx command by reenabling the watermark interrupt if there is data in write buffer. This can however break software flow control by re-enabling tx after the user has stopped it. Address the original issue by not clearing the CMD_DONE flag after polling for command completion. This allows the interrupt handler to start another transfer when the CMD_DONE interrupt has not been disabled due to flow control. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Fixes: 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang") Cc: stable(a)vger.kernel.org # 4.17 Reviewed-by: Douglas Anderson <dianders(a)chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20240906131336.23625-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 309c0bddf26a..b88435c0ea50 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -306,18 +306,16 @@ static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size) static void qcom_geni_serial_poll_tx_done(struct uart_port *uport) { int done; - u32 irq_clear = M_CMD_DONE_EN; done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, M_CMD_DONE_EN, true); if (!done) { writel(M_GENI_CMD_ABORT, uport->membase + SE_GENI_M_CMD_CTRL_REG); - irq_clear |= M_CMD_ABORT_EN; qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, M_CMD_ABORT_EN, true); + writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); } - writel(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR); } static void qcom_geni_serial_abort_rx(struct uart_port *uport) @@ -378,6 +376,7 @@ static void qcom_geni_serial_poll_put_char(struct uart_port *uport, unsigned char c) { writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(M_CMD_DONE_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); qcom_geni_serial_setup_tx(uport, 1); WARN_ON(!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, M_TX_FIFO_WATERMARK_EN, true)); @@ -422,6 +421,7 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s, } writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(M_CMD_DONE_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); qcom_geni_serial_setup_tx(uport, bytes_to_send); for (i = 0; i < count; ) { size_t chars_to_write = 0; @@ -463,7 +463,6 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s, bool locked = true; unsigned long flags; u32 geni_status; - u32 irq_en; WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS); @@ -495,12 +494,6 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s, * has been sent, in which case we need to look for done first. */ qcom_geni_serial_poll_tx_done(uport); - - if (!kfifo_is_empty(&uport->state->port.xmit_fifo)) { - irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); - writel(irq_en | M_TX_FIFO_WATERMARK_EN, - uport->membase + SE_GENI_M_IRQ_EN); - } } __qcom_geni_serial_console_write(uport, s, count);

3 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] serial: qcom-geni: fix false console tx restart" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x f97cdbbf187fefcf1fe19689cd9fdca11fe9c3eb # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100114-ample-drowsily-e38d@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: f97cdbbf187f ("serial: qcom-geni: fix false console tx restart") 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo") f8fef2fa419f ("tty: msm_serial: use dmaengine_prep_slave_sg()") 9054605ab846 ("tty: 8250_omap: use dmaengine_prep_slave_sg()") 8192fabb0db2 ("tty: 8250_dma: use dmaengine_prep_slave_sg()") 3bcb0bf65c2b ("Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f97cdbbf187fefcf1fe19689cd9fdca11fe9c3eb Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 6 Sep 2024 15:13:30 +0200 Subject: [PATCH] serial: qcom-geni: fix false console tx restart MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang") addressed an issue with stalled tx after the console code interrupted the last bytes of a tx command by reenabling the watermark interrupt if there is data in write buffer. This can however break software flow control by re-enabling tx after the user has stopped it. Address the original issue by not clearing the CMD_DONE flag after polling for command completion. This allows the interrupt handler to start another transfer when the CMD_DONE interrupt has not been disabled due to flow control. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Fixes: 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang") Cc: stable(a)vger.kernel.org # 4.17 Reviewed-by: Douglas Anderson <dianders(a)chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20240906131336.23625-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 309c0bddf26a..b88435c0ea50 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -306,18 +306,16 @@ static void qcom_geni_serial_setup_tx(struct uart_port *uport, u32 xmit_size) static void qcom_geni_serial_poll_tx_done(struct uart_port *uport) { int done; - u32 irq_clear = M_CMD_DONE_EN; done = qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, M_CMD_DONE_EN, true); if (!done) { writel(M_GENI_CMD_ABORT, uport->membase + SE_GENI_M_CMD_CTRL_REG); - irq_clear |= M_CMD_ABORT_EN; qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, M_CMD_ABORT_EN, true); + writel(M_CMD_ABORT_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); } - writel(irq_clear, uport->membase + SE_GENI_M_IRQ_CLEAR); } static void qcom_geni_serial_abort_rx(struct uart_port *uport) @@ -378,6 +376,7 @@ static void qcom_geni_serial_poll_put_char(struct uart_port *uport, unsigned char c) { writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(M_CMD_DONE_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); qcom_geni_serial_setup_tx(uport, 1); WARN_ON(!qcom_geni_serial_poll_bit(uport, SE_GENI_M_IRQ_STATUS, M_TX_FIFO_WATERMARK_EN, true)); @@ -422,6 +421,7 @@ __qcom_geni_serial_console_write(struct uart_port *uport, const char *s, } writel(DEF_TX_WM, uport->membase + SE_GENI_TX_WATERMARK_REG); + writel(M_CMD_DONE_EN, uport->membase + SE_GENI_M_IRQ_CLEAR); qcom_geni_serial_setup_tx(uport, bytes_to_send); for (i = 0; i < count; ) { size_t chars_to_write = 0; @@ -463,7 +463,6 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s, bool locked = true; unsigned long flags; u32 geni_status; - u32 irq_en; WARN_ON(co->index < 0 || co->index >= GENI_UART_CONS_PORTS); @@ -495,12 +494,6 @@ static void qcom_geni_serial_console_write(struct console *co, const char *s, * has been sent, in which case we need to look for done first. */ qcom_geni_serial_poll_tx_done(uport); - - if (!kfifo_is_empty(&uport->state->port.xmit_fifo)) { - irq_en = readl(uport->membase + SE_GENI_M_IRQ_EN); - writel(irq_en | M_TX_FIFO_WATERMARK_EN, - uport->membase + SE_GENI_M_IRQ_EN); - } } __qcom_geni_serial_console_write(uport, s, count);

3 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] serial: qcom-geni: fix fifo polling timeout" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100158-stoke-upfront-79a9@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: c80ee36ac8f9 ("serial: qcom-geni: fix fifo polling timeout") 8ece7b754bc3 ("serial: qcom-geni: fix opp vote on shutdown") 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") 40ec6d41c841 ("tty: serial: qcom-geni-serial: use of_device_id data") 0626afe57b1f ("tty: serial: qcom-geni-serial: drop the return value from handle_rx") bd7955840cbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo()") d420fb491cbc ("tty: serial: qcom-geni-serial: split out the FIFO tx code") fe6a00e8fcbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()") 00ce7c6e86b5 ("tty: serial: qcom-geni-serial: improve the to_dev_port() macro") 6cde11dbf4b6 ("tty: serial: qcom-geni-serial: align #define values") 68c6bd92c86c ("tty: serial: qcom-geni-serial: remove unused symbols") d0fabb0dc1a6 ("tty: serial: qcom-geni-serial: drop unneeded forward definitions") 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") 654a8d6c93e7 ("tty: serial: qcom-geni-serial: Implement start_rx callback") c2194bc999d4 ("tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.") d6efb3ac3e6c ("Merge tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 6 Sep 2024 15:13:29 +0200 Subject: [PATCH] serial: qcom-geni: fix fifo polling timeout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The qcom_geni_serial_poll_bit() can be used to wait for events like command completion and is supposed to wait for the time it takes to clear a full fifo before timing out. As noted by Doug, the current implementation does not account for start, stop and parity bits when determining the timeout. The helper also does not currently account for the shift register and the two-word intermediate transfer register. A too short timeout can specifically lead to lost characters when waiting for a transfer to complete as the transfer is cancelled on timeout. Instead of determining the poll timeout on every call, store the fifo timeout when updating it in set_termios() and make sure to take the shift and intermediate registers into account. Note that serial core has already added a 20 ms margin to the fifo timeout. Also note that the current uart_fifo_timeout() interface does unnecessary calculations on every call and did not exist in earlier kernels so only store its result once. This facilitates backports too as earlier kernels can derive the timeout from uport->timeout, which has since been removed. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Cc: stable(a)vger.kernel.org # 4.17 Reported-by: Douglas Anderson <dianders(a)chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20240906131336.23625-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 69a632fefc41..309c0bddf26a 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -124,7 +124,7 @@ struct qcom_geni_serial_port { dma_addr_t tx_dma_addr; dma_addr_t rx_dma_addr; bool setup; - unsigned int baud; + unsigned long poll_timeout_us; unsigned long clk_rate; void *rx_buf; u32 loopback; @@ -270,22 +270,13 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport, { u32 reg; struct qcom_geni_serial_port *port; - unsigned int baud; - unsigned int fifo_bits; unsigned long timeout_us = 20000; struct qcom_geni_private_data *private_data = uport->private_data; if (private_data->drv) { port = to_dev_port(uport); - baud = port->baud; - if (!baud) - baud = 115200; - fifo_bits = port->tx_fifo_depth * port->tx_fifo_width; - /* - * Total polling iterations based on FIFO worth of bytes to be - * sent at current baud. Add a little fluff to the wait. - */ - timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500; + if (port->poll_timeout_us) + timeout_us = port->poll_timeout_us; } /* @@ -1244,11 +1235,11 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, unsigned long clk_rate; u32 ver, sampling_rate; unsigned int avg_bw_core; + unsigned long timeout; qcom_geni_serial_stop_rx(uport); /* baud rate */ baud = uart_get_baud_rate(uport, termios, old, 300, 4000000); - port->baud = baud; sampling_rate = UART_OVERSAMPLING; /* Sampling rate is halved for IP versions >= 2.5 */ @@ -1326,9 +1317,21 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, else tx_trans_cfg |= UART_CTS_MASK; - if (baud) + if (baud) { uart_update_timeout(uport, termios->c_cflag, baud); + /* + * Make sure that qcom_geni_serial_poll_bitfield() waits for + * the FIFO, two-word intermediate transfer register and shift + * register to clear. + * + * Note that uart_fifo_timeout() also adds a 20 ms margin. + */ + timeout = jiffies_to_usecs(uart_fifo_timeout(uport)); + timeout += 3 * timeout / port->tx_fifo_depth; + WRITE_ONCE(port->poll_timeout_us, timeout); + } + if (!uart_console(uport)) writel(port->loopback, uport->membase + SE_UART_LOOPBACK_CFG);

3 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] serial: qcom-geni: fix fifo polling timeout" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100157-playhouse-snipping-6cd2@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: c80ee36ac8f9 ("serial: qcom-geni: fix fifo polling timeout") 8ece7b754bc3 ("serial: qcom-geni: fix opp vote on shutdown") 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") 40ec6d41c841 ("tty: serial: qcom-geni-serial: use of_device_id data") 0626afe57b1f ("tty: serial: qcom-geni-serial: drop the return value from handle_rx") bd7955840cbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo()") d420fb491cbc ("tty: serial: qcom-geni-serial: split out the FIFO tx code") fe6a00e8fcbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()") 00ce7c6e86b5 ("tty: serial: qcom-geni-serial: improve the to_dev_port() macro") 6cde11dbf4b6 ("tty: serial: qcom-geni-serial: align #define values") 68c6bd92c86c ("tty: serial: qcom-geni-serial: remove unused symbols") d0fabb0dc1a6 ("tty: serial: qcom-geni-serial: drop unneeded forward definitions") 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") 654a8d6c93e7 ("tty: serial: qcom-geni-serial: Implement start_rx callback") c2194bc999d4 ("tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.") d6efb3ac3e6c ("Merge tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 6 Sep 2024 15:13:29 +0200 Subject: [PATCH] serial: qcom-geni: fix fifo polling timeout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The qcom_geni_serial_poll_bit() can be used to wait for events like command completion and is supposed to wait for the time it takes to clear a full fifo before timing out. As noted by Doug, the current implementation does not account for start, stop and parity bits when determining the timeout. The helper also does not currently account for the shift register and the two-word intermediate transfer register. A too short timeout can specifically lead to lost characters when waiting for a transfer to complete as the transfer is cancelled on timeout. Instead of determining the poll timeout on every call, store the fifo timeout when updating it in set_termios() and make sure to take the shift and intermediate registers into account. Note that serial core has already added a 20 ms margin to the fifo timeout. Also note that the current uart_fifo_timeout() interface does unnecessary calculations on every call and did not exist in earlier kernels so only store its result once. This facilitates backports too as earlier kernels can derive the timeout from uport->timeout, which has since been removed. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Cc: stable(a)vger.kernel.org # 4.17 Reported-by: Douglas Anderson <dianders(a)chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20240906131336.23625-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 69a632fefc41..309c0bddf26a 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -124,7 +124,7 @@ struct qcom_geni_serial_port { dma_addr_t tx_dma_addr; dma_addr_t rx_dma_addr; bool setup; - unsigned int baud; + unsigned long poll_timeout_us; unsigned long clk_rate; void *rx_buf; u32 loopback; @@ -270,22 +270,13 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport, { u32 reg; struct qcom_geni_serial_port *port; - unsigned int baud; - unsigned int fifo_bits; unsigned long timeout_us = 20000; struct qcom_geni_private_data *private_data = uport->private_data; if (private_data->drv) { port = to_dev_port(uport); - baud = port->baud; - if (!baud) - baud = 115200; - fifo_bits = port->tx_fifo_depth * port->tx_fifo_width; - /* - * Total polling iterations based on FIFO worth of bytes to be - * sent at current baud. Add a little fluff to the wait. - */ - timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500; + if (port->poll_timeout_us) + timeout_us = port->poll_timeout_us; } /* @@ -1244,11 +1235,11 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, unsigned long clk_rate; u32 ver, sampling_rate; unsigned int avg_bw_core; + unsigned long timeout; qcom_geni_serial_stop_rx(uport); /* baud rate */ baud = uart_get_baud_rate(uport, termios, old, 300, 4000000); - port->baud = baud; sampling_rate = UART_OVERSAMPLING; /* Sampling rate is halved for IP versions >= 2.5 */ @@ -1326,9 +1317,21 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, else tx_trans_cfg |= UART_CTS_MASK; - if (baud) + if (baud) { uart_update_timeout(uport, termios->c_cflag, baud); + /* + * Make sure that qcom_geni_serial_poll_bitfield() waits for + * the FIFO, two-word intermediate transfer register and shift + * register to clear. + * + * Note that uart_fifo_timeout() also adds a 20 ms margin. + */ + timeout = jiffies_to_usecs(uart_fifo_timeout(uport)); + timeout += 3 * timeout / port->tx_fifo_depth; + WRITE_ONCE(port->poll_timeout_us, timeout); + } + if (!uart_console(uport)) writel(port->loopback, uport->membase + SE_UART_LOOPBACK_CFG);

3 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] serial: qcom-geni: fix fifo polling timeout" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100156-hacksaw-elephant-82f1@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: c80ee36ac8f9 ("serial: qcom-geni: fix fifo polling timeout") 8ece7b754bc3 ("serial: qcom-geni: fix opp vote on shutdown") 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") 40ec6d41c841 ("tty: serial: qcom-geni-serial: use of_device_id data") 0626afe57b1f ("tty: serial: qcom-geni-serial: drop the return value from handle_rx") bd7955840cbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo()") d420fb491cbc ("tty: serial: qcom-geni-serial: split out the FIFO tx code") fe6a00e8fcbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()") 00ce7c6e86b5 ("tty: serial: qcom-geni-serial: improve the to_dev_port() macro") 6cde11dbf4b6 ("tty: serial: qcom-geni-serial: align #define values") 68c6bd92c86c ("tty: serial: qcom-geni-serial: remove unused symbols") d0fabb0dc1a6 ("tty: serial: qcom-geni-serial: drop unneeded forward definitions") 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") 654a8d6c93e7 ("tty: serial: qcom-geni-serial: Implement start_rx callback") c2194bc999d4 ("tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 6 Sep 2024 15:13:29 +0200 Subject: [PATCH] serial: qcom-geni: fix fifo polling timeout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The qcom_geni_serial_poll_bit() can be used to wait for events like command completion and is supposed to wait for the time it takes to clear a full fifo before timing out. As noted by Doug, the current implementation does not account for start, stop and parity bits when determining the timeout. The helper also does not currently account for the shift register and the two-word intermediate transfer register. A too short timeout can specifically lead to lost characters when waiting for a transfer to complete as the transfer is cancelled on timeout. Instead of determining the poll timeout on every call, store the fifo timeout when updating it in set_termios() and make sure to take the shift and intermediate registers into account. Note that serial core has already added a 20 ms margin to the fifo timeout. Also note that the current uart_fifo_timeout() interface does unnecessary calculations on every call and did not exist in earlier kernels so only store its result once. This facilitates backports too as earlier kernels can derive the timeout from uport->timeout, which has since been removed. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Cc: stable(a)vger.kernel.org # 4.17 Reported-by: Douglas Anderson <dianders(a)chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20240906131336.23625-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 69a632fefc41..309c0bddf26a 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -124,7 +124,7 @@ struct qcom_geni_serial_port { dma_addr_t tx_dma_addr; dma_addr_t rx_dma_addr; bool setup; - unsigned int baud; + unsigned long poll_timeout_us; unsigned long clk_rate; void *rx_buf; u32 loopback; @@ -270,22 +270,13 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport, { u32 reg; struct qcom_geni_serial_port *port; - unsigned int baud; - unsigned int fifo_bits; unsigned long timeout_us = 20000; struct qcom_geni_private_data *private_data = uport->private_data; if (private_data->drv) { port = to_dev_port(uport); - baud = port->baud; - if (!baud) - baud = 115200; - fifo_bits = port->tx_fifo_depth * port->tx_fifo_width; - /* - * Total polling iterations based on FIFO worth of bytes to be - * sent at current baud. Add a little fluff to the wait. - */ - timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500; + if (port->poll_timeout_us) + timeout_us = port->poll_timeout_us; } /* @@ -1244,11 +1235,11 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, unsigned long clk_rate; u32 ver, sampling_rate; unsigned int avg_bw_core; + unsigned long timeout; qcom_geni_serial_stop_rx(uport); /* baud rate */ baud = uart_get_baud_rate(uport, termios, old, 300, 4000000); - port->baud = baud; sampling_rate = UART_OVERSAMPLING; /* Sampling rate is halved for IP versions >= 2.5 */ @@ -1326,9 +1317,21 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, else tx_trans_cfg |= UART_CTS_MASK; - if (baud) + if (baud) { uart_update_timeout(uport, termios->c_cflag, baud); + /* + * Make sure that qcom_geni_serial_poll_bitfield() waits for + * the FIFO, two-word intermediate transfer register and shift + * register to clear. + * + * Note that uart_fifo_timeout() also adds a 20 ms margin. + */ + timeout = jiffies_to_usecs(uart_fifo_timeout(uport)); + timeout += 3 * timeout / port->tx_fifo_depth; + WRITE_ONCE(port->poll_timeout_us, timeout); + } + if (!uart_console(uport)) writel(port->loopback, uport->membase + SE_UART_LOOPBACK_CFG);

3 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] serial: qcom-geni: fix fifo polling timeout" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100155-shaking-flight-b258@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: c80ee36ac8f9 ("serial: qcom-geni: fix fifo polling timeout") 8ece7b754bc3 ("serial: qcom-geni: fix opp vote on shutdown") 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") 40ec6d41c841 ("tty: serial: qcom-geni-serial: use of_device_id data") 0626afe57b1f ("tty: serial: qcom-geni-serial: drop the return value from handle_rx") bd7955840cbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo()") d420fb491cbc ("tty: serial: qcom-geni-serial: split out the FIFO tx code") fe6a00e8fcbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()") 00ce7c6e86b5 ("tty: serial: qcom-geni-serial: improve the to_dev_port() macro") 6cde11dbf4b6 ("tty: serial: qcom-geni-serial: align #define values") 68c6bd92c86c ("tty: serial: qcom-geni-serial: remove unused symbols") d0fabb0dc1a6 ("tty: serial: qcom-geni-serial: drop unneeded forward definitions") 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") 654a8d6c93e7 ("tty: serial: qcom-geni-serial: Implement start_rx callback") c2194bc999d4 ("tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 6 Sep 2024 15:13:29 +0200 Subject: [PATCH] serial: qcom-geni: fix fifo polling timeout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The qcom_geni_serial_poll_bit() can be used to wait for events like command completion and is supposed to wait for the time it takes to clear a full fifo before timing out. As noted by Doug, the current implementation does not account for start, stop and parity bits when determining the timeout. The helper also does not currently account for the shift register and the two-word intermediate transfer register. A too short timeout can specifically lead to lost characters when waiting for a transfer to complete as the transfer is cancelled on timeout. Instead of determining the poll timeout on every call, store the fifo timeout when updating it in set_termios() and make sure to take the shift and intermediate registers into account. Note that serial core has already added a 20 ms margin to the fifo timeout. Also note that the current uart_fifo_timeout() interface does unnecessary calculations on every call and did not exist in earlier kernels so only store its result once. This facilitates backports too as earlier kernels can derive the timeout from uport->timeout, which has since been removed. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Cc: stable(a)vger.kernel.org # 4.17 Reported-by: Douglas Anderson <dianders(a)chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20240906131336.23625-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 69a632fefc41..309c0bddf26a 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -124,7 +124,7 @@ struct qcom_geni_serial_port { dma_addr_t tx_dma_addr; dma_addr_t rx_dma_addr; bool setup; - unsigned int baud; + unsigned long poll_timeout_us; unsigned long clk_rate; void *rx_buf; u32 loopback; @@ -270,22 +270,13 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport, { u32 reg; struct qcom_geni_serial_port *port; - unsigned int baud; - unsigned int fifo_bits; unsigned long timeout_us = 20000; struct qcom_geni_private_data *private_data = uport->private_data; if (private_data->drv) { port = to_dev_port(uport); - baud = port->baud; - if (!baud) - baud = 115200; - fifo_bits = port->tx_fifo_depth * port->tx_fifo_width; - /* - * Total polling iterations based on FIFO worth of bytes to be - * sent at current baud. Add a little fluff to the wait. - */ - timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500; + if (port->poll_timeout_us) + timeout_us = port->poll_timeout_us; } /* @@ -1244,11 +1235,11 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, unsigned long clk_rate; u32 ver, sampling_rate; unsigned int avg_bw_core; + unsigned long timeout; qcom_geni_serial_stop_rx(uport); /* baud rate */ baud = uart_get_baud_rate(uport, termios, old, 300, 4000000); - port->baud = baud; sampling_rate = UART_OVERSAMPLING; /* Sampling rate is halved for IP versions >= 2.5 */ @@ -1326,9 +1317,21 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, else tx_trans_cfg |= UART_CTS_MASK; - if (baud) + if (baud) { uart_update_timeout(uport, termios->c_cflag, baud); + /* + * Make sure that qcom_geni_serial_poll_bitfield() waits for + * the FIFO, two-word intermediate transfer register and shift + * register to clear. + * + * Note that uart_fifo_timeout() also adds a 20 ms margin. + */ + timeout = jiffies_to_usecs(uart_fifo_timeout(uport)); + timeout += 3 * timeout / port->tx_fifo_depth; + WRITE_ONCE(port->poll_timeout_us, timeout); + } + if (!uart_console(uport)) writel(port->loopback, uport->membase + SE_UART_LOOPBACK_CFG);

3 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] serial: qcom-geni: fix fifo polling timeout" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100154-unhook-enquirer-8f9e@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: c80ee36ac8f9 ("serial: qcom-geni: fix fifo polling timeout") 8ece7b754bc3 ("serial: qcom-geni: fix opp vote on shutdown") 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") 40ec6d41c841 ("tty: serial: qcom-geni-serial: use of_device_id data") 0626afe57b1f ("tty: serial: qcom-geni-serial: drop the return value from handle_rx") bd7955840cbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_send_chunk_fifo()") d420fb491cbc ("tty: serial: qcom-geni-serial: split out the FIFO tx code") fe6a00e8fcbe ("tty: serial: qcom-geni-serial: refactor qcom_geni_serial_isr()") 00ce7c6e86b5 ("tty: serial: qcom-geni-serial: improve the to_dev_port() macro") 6cde11dbf4b6 ("tty: serial: qcom-geni-serial: align #define values") 68c6bd92c86c ("tty: serial: qcom-geni-serial: remove unused symbols") d0fabb0dc1a6 ("tty: serial: qcom-geni-serial: drop unneeded forward definitions") 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan+linaro(a)kernel.org> Date: Fri, 6 Sep 2024 15:13:29 +0200 Subject: [PATCH] serial: qcom-geni: fix fifo polling timeout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The qcom_geni_serial_poll_bit() can be used to wait for events like command completion and is supposed to wait for the time it takes to clear a full fifo before timing out. As noted by Doug, the current implementation does not account for start, stop and parity bits when determining the timeout. The helper also does not currently account for the shift register and the two-word intermediate transfer register. A too short timeout can specifically lead to lost characters when waiting for a transfer to complete as the transfer is cancelled on timeout. Instead of determining the poll timeout on every call, store the fifo timeout when updating it in set_termios() and make sure to take the shift and intermediate registers into account. Note that serial core has already added a 20 ms margin to the fifo timeout. Also note that the current uart_fifo_timeout() interface does unnecessary calculations on every call and did not exist in earlier kernels so only store its result once. This facilitates backports too as earlier kernels can derive the timeout from uport->timeout, which has since been removed. Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP") Cc: stable(a)vger.kernel.org # 4.17 Reported-by: Douglas Anderson <dianders(a)chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Signed-off-by: Johan Hovold <johan+linaro(a)kernel.org> Link: https://lore.kernel.org/r/20240906131336.23625-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 69a632fefc41..309c0bddf26a 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -124,7 +124,7 @@ struct qcom_geni_serial_port { dma_addr_t tx_dma_addr; dma_addr_t rx_dma_addr; bool setup; - unsigned int baud; + unsigned long poll_timeout_us; unsigned long clk_rate; void *rx_buf; u32 loopback; @@ -270,22 +270,13 @@ static bool qcom_geni_serial_poll_bit(struct uart_port *uport, { u32 reg; struct qcom_geni_serial_port *port; - unsigned int baud; - unsigned int fifo_bits; unsigned long timeout_us = 20000; struct qcom_geni_private_data *private_data = uport->private_data; if (private_data->drv) { port = to_dev_port(uport); - baud = port->baud; - if (!baud) - baud = 115200; - fifo_bits = port->tx_fifo_depth * port->tx_fifo_width; - /* - * Total polling iterations based on FIFO worth of bytes to be - * sent at current baud. Add a little fluff to the wait. - */ - timeout_us = ((fifo_bits * USEC_PER_SEC) / baud) + 500; + if (port->poll_timeout_us) + timeout_us = port->poll_timeout_us; } /* @@ -1244,11 +1235,11 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, unsigned long clk_rate; u32 ver, sampling_rate; unsigned int avg_bw_core; + unsigned long timeout; qcom_geni_serial_stop_rx(uport); /* baud rate */ baud = uart_get_baud_rate(uport, termios, old, 300, 4000000); - port->baud = baud; sampling_rate = UART_OVERSAMPLING; /* Sampling rate is halved for IP versions >= 2.5 */ @@ -1326,9 +1317,21 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, else tx_trans_cfg |= UART_CTS_MASK; - if (baud) + if (baud) { uart_update_timeout(uport, termios->c_cflag, baud); + /* + * Make sure that qcom_geni_serial_poll_bitfield() waits for + * the FIFO, two-word intermediate transfer register and shift + * register to clear. + * + * Note that uart_fifo_timeout() also adds a 20 ms margin. + */ + timeout = jiffies_to_usecs(uart_fifo_timeout(uport)); + timeout += 3 * timeout / port->tx_fifo_depth; + WRITE_ONCE(port->poll_timeout_us, timeout); + } + if (!uart_console(uport)) writel(port->loopback, uport->membase + SE_UART_LOOPBACK_CFG);

3 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x f81dfa3b57c624c56f2bff171c431bc7f5b558f2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100130-city-recycling-1576@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: f81dfa3b57c6 ("xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them.") 884c27440829 ("usb: renesas-xhci: Remove renesas_xhci_pci_exit()") 78ef1b1ea193 ("usb: xhci: make symbols static") a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with memory") 8bd5741e3145 ("usb: renesas-xhci: Add the renesas xhci driver") ff4c65ca48f0 ("usb: hci: add hc_driver as argument for usb_hcd_pci_probe") a7d57abcc8a5 ("xhci: workaround CSS timeout on AMD SNPS 3.0 xHC") 11644a765952 ("xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc") 2815ef7fe4d4 ("xhci-pci: allow host runtime PM as default for Intel Alpine and Titan Ridge") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f81dfa3b57c624c56f2bff171c431bc7f5b558f2 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Thu, 5 Sep 2024 17:32:59 +0300 Subject: [PATCH] xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them. PCI xHC host should be stopped and xhci driver memory freed before putting host to PCI D3 state during PCI remove callback. Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around and set the host to D3 before calling usb_hcd_pci_remove(dev), which will access the host to stop it, and then free xhci. Fixes: f1f6d9a8b540 ("xhci: don't dereference a xhci member after removing xhci") Cc: stable(a)vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20240905143300.1959279-12-mathias.nyman@linux.int… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 526739af2070..de50f5ba60df 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -657,8 +657,10 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) void xhci_pci_remove(struct pci_dev *dev) { struct xhci_hcd *xhci; + bool set_power_d3; xhci = hcd_to_xhci(pci_get_drvdata(dev)); + set_power_d3 = xhci->quirks & XHCI_SPURIOUS_WAKEUP; xhci->xhc_state |= XHCI_STATE_REMOVING; @@ -671,11 +673,11 @@ void xhci_pci_remove(struct pci_dev *dev) xhci->shared_hcd = NULL; } - /* Workaround for spurious wakeups at shutdown with HSW */ - if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) - pci_set_power_state(dev, PCI_D3hot); - usb_hcd_pci_remove(dev); + + /* Workaround for spurious wakeups at shutdown with HSW */ + if (set_power_d3) + pci_set_power_state(dev, PCI_D3hot); } EXPORT_SYMBOL_NS_GPL(xhci_pci_remove, xhci);

3 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x f81dfa3b57c624c56f2bff171c431bc7f5b558f2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100130-footbath-camper-be92@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: f81dfa3b57c6 ("xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them.") 884c27440829 ("usb: renesas-xhci: Remove renesas_xhci_pci_exit()") 78ef1b1ea193 ("usb: xhci: make symbols static") a66d21d7dba8 ("usb: xhci: Add support for Renesas controller with memory") 8bd5741e3145 ("usb: renesas-xhci: Add the renesas xhci driver") ff4c65ca48f0 ("usb: hci: add hc_driver as argument for usb_hcd_pci_probe") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f81dfa3b57c624c56f2bff171c431bc7f5b558f2 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Thu, 5 Sep 2024 17:32:59 +0300 Subject: [PATCH] xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them. PCI xHC host should be stopped and xhci driver memory freed before putting host to PCI D3 state during PCI remove callback. Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around and set the host to D3 before calling usb_hcd_pci_remove(dev), which will access the host to stop it, and then free xhci. Fixes: f1f6d9a8b540 ("xhci: don't dereference a xhci member after removing xhci") Cc: stable(a)vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20240905143300.1959279-12-mathias.nyman@linux.int… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 526739af2070..de50f5ba60df 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -657,8 +657,10 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) void xhci_pci_remove(struct pci_dev *dev) { struct xhci_hcd *xhci; + bool set_power_d3; xhci = hcd_to_xhci(pci_get_drvdata(dev)); + set_power_d3 = xhci->quirks & XHCI_SPURIOUS_WAKEUP; xhci->xhc_state |= XHCI_STATE_REMOVING; @@ -671,11 +673,11 @@ void xhci_pci_remove(struct pci_dev *dev) xhci->shared_hcd = NULL; } - /* Workaround for spurious wakeups at shutdown with HSW */ - if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) - pci_set_power_state(dev, PCI_D3hot); - usb_hcd_pci_remove(dev); + + /* Workaround for spurious wakeups at shutdown with HSW */ + if (set_power_d3) + pci_set_power_state(dev, PCI_D3hot); } EXPORT_SYMBOL_NS_GPL(xhci_pci_remove, xhci);

3 months, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x f81dfa3b57c624c56f2bff171c431bc7f5b558f2 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100129-user-germicide-1db7@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: f81dfa3b57c6 ("xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them.") 884c27440829 ("usb: renesas-xhci: Remove renesas_xhci_pci_exit()") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From f81dfa3b57c624c56f2bff171c431bc7f5b558f2 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Thu, 5 Sep 2024 17:32:59 +0300 Subject: [PATCH] xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them. PCI xHC host should be stopped and xhci driver memory freed before putting host to PCI D3 state during PCI remove callback. Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around and set the host to D3 before calling usb_hcd_pci_remove(dev), which will access the host to stop it, and then free xhci. Fixes: f1f6d9a8b540 ("xhci: don't dereference a xhci member after removing xhci") Cc: stable(a)vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20240905143300.1959279-12-mathias.nyman@linux.int… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 526739af2070..de50f5ba60df 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -657,8 +657,10 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) void xhci_pci_remove(struct pci_dev *dev) { struct xhci_hcd *xhci; + bool set_power_d3; xhci = hcd_to_xhci(pci_get_drvdata(dev)); + set_power_d3 = xhci->quirks & XHCI_SPURIOUS_WAKEUP; xhci->xhc_state |= XHCI_STATE_REMOVING; @@ -671,11 +673,11 @@ void xhci_pci_remove(struct pci_dev *dev) xhci->shared_hcd = NULL; } - /* Workaround for spurious wakeups at shutdown with HSW */ - if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) - pci_set_power_state(dev, PCI_D3hot); - usb_hcd_pci_remove(dev); + + /* Workaround for spurious wakeups at shutdown with HSW */ + if (set_power_d3) + pci_set_power_state(dev, PCI_D3hot); } EXPORT_SYMBOL_NS_GPL(xhci_pci_remove, xhci);

3 months, 2 weeks

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2024