October 2024 - Linux-stable-mirror

FAILED: patch "[PATCH] bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()" failed to apply to 6.11-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.11-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.11.y git checkout FETCH_HEAD git cherry-pick -x 5fe6e308abaea082c20fbf2aa5df8e14495622cf # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100247-spray-enjoyable-b1d0@gregkh' --subject-prefix 'PATCH 6.11.y' HEAD^.. Possible dependencies: 5fe6e308abae ("bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()") 3c83a9ad0295 ("uprobes: make uprobe_register() return struct uprobe *") e04332ebc8ac ("uprobes: kill uprobe_register_refctr()") db61e6a4eee5 ("selftests/bpf: fix uprobe.path leak in bpf_testmod") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5fe6e308abaea082c20fbf2aa5df8e14495622cf Mon Sep 17 00:00:00 2001 From: Oleg Nesterov <oleg(a)redhat.com> Date: Tue, 13 Aug 2024 17:25:24 +0200 Subject: [PATCH] bpf: Fix use-after-free in bpf_uprobe_multi_link_attach() If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the error_free label and frees the array of bpf_uprobe's without calling bpf_uprobe_unregister(). This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer without removing it from the uprobe->consumers list. Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link") Closes: https://lore.kernel.org/all/000000000000382d39061f59f2dd@google.com/ Reported-by: syzbot+f7a1c2c2711e4a780f19(a)syzkaller.appspotmail.com Signed-off-by: Oleg Nesterov <oleg(a)redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Acked-by: Andrii Nakryiko <andrii(a)kernel.org> Acked-by: Jiri Olsa <jolsa(a)kernel.org> Tested-by: syzbot+f7a1c2c2711e4a780f19(a)syzkaller.appspotmail.com Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20240813152524.GA7292@redhat.com diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index 4e391daafa64..90cd30e9723e 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -3484,17 +3484,20 @@ int bpf_uprobe_multi_link_attach(const union bpf_attr *attr, struct bpf_prog *pr &uprobes[i].consumer); if (IS_ERR(uprobes[i].uprobe)) { err = PTR_ERR(uprobes[i].uprobe); - bpf_uprobe_unregister(uprobes, i); - goto error_free; + link->cnt = i; + goto error_unregister; } } err = bpf_link_prime(&link->link, &link_primer); if (err) - goto error_free; + goto error_unregister; return bpf_link_settle(&link_primer); +error_unregister: + bpf_uprobe_unregister(uprobes, link->cnt); + error_free: kvfree(uprobes); kfree(link);

3 months, 1 week

3
2
0 0

FAILED: patch "[PATCH] dm-verity: restart or panic on an I/O error" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x e6a3531dd542cb127c8de32ab1e54a48ae19962b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100250-mortuary-cogwheel-4144@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: e6a3531dd542 ("dm-verity: restart or panic on an I/O error") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e6a3531dd542cb127c8de32ab1e54a48ae19962b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka <mpatocka(a)redhat.com> Date: Tue, 24 Sep 2024 15:18:29 +0200 Subject: [PATCH] dm-verity: restart or panic on an I/O error Maxim Suhanov reported that dm-verity doesn't crash if an I/O error happens. In theory, this could be used to subvert security, because an attacker can create sectors that return error with the Write Uncorrectable command. Some programs may misbehave if they have to deal with EIO. This commit fixes dm-verity, so that if "panic_on_corruption" or "restart_on_corruption" was specified and an I/O error happens, the machine will panic or restart. This commit also changes kernel_restart to emergency_restart - kernel_restart calls reboot notifiers and these reboot notifiers may wait for the bio that failed. emergency_restart doesn't call the notifiers. Reported-by: Maxim Suhanov <dfirblog(a)gmail.com> Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Cc: stable(a)vger.kernel.org diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index cf659c8feb29..a95c1b9cc5b5 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -272,8 +272,10 @@ static int verity_handle_err(struct dm_verity *v, enum verity_block_type type, if (v->mode == DM_VERITY_MODE_LOGGING) return 0; - if (v->mode == DM_VERITY_MODE_RESTART) - kernel_restart("dm-verity device corrupted"); + if (v->mode == DM_VERITY_MODE_RESTART) { + pr_emerg("dm-verity device corrupted\n"); + emergency_restart(); + } if (v->mode == DM_VERITY_MODE_PANIC) panic("dm-verity device corrupted"); @@ -596,6 +598,23 @@ static void verity_finish_io(struct dm_verity_io *io, blk_status_t status) if (!static_branch_unlikely(&use_bh_wq_enabled) || !io->in_bh) verity_fec_finish_io(io); + if (unlikely(status != BLK_STS_OK) && + unlikely(!(bio->bi_opf & REQ_RAHEAD)) && + !verity_is_system_shutting_down()) { + if (v->mode == DM_VERITY_MODE_RESTART || + v->mode == DM_VERITY_MODE_PANIC) + DMERR_LIMIT("%s has error: %s", v->data_dev->name, + blk_status_to_str(status)); + + if (v->mode == DM_VERITY_MODE_RESTART) { + pr_emerg("dm-verity device corrupted\n"); + emergency_restart(); + } + + if (v->mode == DM_VERITY_MODE_PANIC) + panic("dm-verity device corrupted"); + } + bio_endio(bio); }

3 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] dm-verity: restart or panic on an I/O error" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x e6a3531dd542cb127c8de32ab1e54a48ae19962b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100249-snorkel-jockey-0dd7@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: e6a3531dd542 ("dm-verity: restart or panic on an I/O error") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e6a3531dd542cb127c8de32ab1e54a48ae19962b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka <mpatocka(a)redhat.com> Date: Tue, 24 Sep 2024 15:18:29 +0200 Subject: [PATCH] dm-verity: restart or panic on an I/O error Maxim Suhanov reported that dm-verity doesn't crash if an I/O error happens. In theory, this could be used to subvert security, because an attacker can create sectors that return error with the Write Uncorrectable command. Some programs may misbehave if they have to deal with EIO. This commit fixes dm-verity, so that if "panic_on_corruption" or "restart_on_corruption" was specified and an I/O error happens, the machine will panic or restart. This commit also changes kernel_restart to emergency_restart - kernel_restart calls reboot notifiers and these reboot notifiers may wait for the bio that failed. emergency_restart doesn't call the notifiers. Reported-by: Maxim Suhanov <dfirblog(a)gmail.com> Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Cc: stable(a)vger.kernel.org diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index cf659c8feb29..a95c1b9cc5b5 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -272,8 +272,10 @@ static int verity_handle_err(struct dm_verity *v, enum verity_block_type type, if (v->mode == DM_VERITY_MODE_LOGGING) return 0; - if (v->mode == DM_VERITY_MODE_RESTART) - kernel_restart("dm-verity device corrupted"); + if (v->mode == DM_VERITY_MODE_RESTART) { + pr_emerg("dm-verity device corrupted\n"); + emergency_restart(); + } if (v->mode == DM_VERITY_MODE_PANIC) panic("dm-verity device corrupted"); @@ -596,6 +598,23 @@ static void verity_finish_io(struct dm_verity_io *io, blk_status_t status) if (!static_branch_unlikely(&use_bh_wq_enabled) || !io->in_bh) verity_fec_finish_io(io); + if (unlikely(status != BLK_STS_OK) && + unlikely(!(bio->bi_opf & REQ_RAHEAD)) && + !verity_is_system_shutting_down()) { + if (v->mode == DM_VERITY_MODE_RESTART || + v->mode == DM_VERITY_MODE_PANIC) + DMERR_LIMIT("%s has error: %s", v->data_dev->name, + blk_status_to_str(status)); + + if (v->mode == DM_VERITY_MODE_RESTART) { + pr_emerg("dm-verity device corrupted\n"); + emergency_restart(); + } + + if (v->mode == DM_VERITY_MODE_PANIC) + panic("dm-verity device corrupted"); + } + bio_endio(bio); }

3 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] dm-verity: restart or panic on an I/O error" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x e6a3531dd542cb127c8de32ab1e54a48ae19962b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100248-blitz-lapdog-06dc@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: e6a3531dd542 ("dm-verity: restart or panic on an I/O error") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e6a3531dd542cb127c8de32ab1e54a48ae19962b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka <mpatocka(a)redhat.com> Date: Tue, 24 Sep 2024 15:18:29 +0200 Subject: [PATCH] dm-verity: restart or panic on an I/O error Maxim Suhanov reported that dm-verity doesn't crash if an I/O error happens. In theory, this could be used to subvert security, because an attacker can create sectors that return error with the Write Uncorrectable command. Some programs may misbehave if they have to deal with EIO. This commit fixes dm-verity, so that if "panic_on_corruption" or "restart_on_corruption" was specified and an I/O error happens, the machine will panic or restart. This commit also changes kernel_restart to emergency_restart - kernel_restart calls reboot notifiers and these reboot notifiers may wait for the bio that failed. emergency_restart doesn't call the notifiers. Reported-by: Maxim Suhanov <dfirblog(a)gmail.com> Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Cc: stable(a)vger.kernel.org diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index cf659c8feb29..a95c1b9cc5b5 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -272,8 +272,10 @@ static int verity_handle_err(struct dm_verity *v, enum verity_block_type type, if (v->mode == DM_VERITY_MODE_LOGGING) return 0; - if (v->mode == DM_VERITY_MODE_RESTART) - kernel_restart("dm-verity device corrupted"); + if (v->mode == DM_VERITY_MODE_RESTART) { + pr_emerg("dm-verity device corrupted\n"); + emergency_restart(); + } if (v->mode == DM_VERITY_MODE_PANIC) panic("dm-verity device corrupted"); @@ -596,6 +598,23 @@ static void verity_finish_io(struct dm_verity_io *io, blk_status_t status) if (!static_branch_unlikely(&use_bh_wq_enabled) || !io->in_bh) verity_fec_finish_io(io); + if (unlikely(status != BLK_STS_OK) && + unlikely(!(bio->bi_opf & REQ_RAHEAD)) && + !verity_is_system_shutting_down()) { + if (v->mode == DM_VERITY_MODE_RESTART || + v->mode == DM_VERITY_MODE_PANIC) + DMERR_LIMIT("%s has error: %s", v->data_dev->name, + blk_status_to_str(status)); + + if (v->mode == DM_VERITY_MODE_RESTART) { + pr_emerg("dm-verity device corrupted\n"); + emergency_restart(); + } + + if (v->mode == DM_VERITY_MODE_PANIC) + panic("dm-verity device corrupted"); + } + bio_endio(bio); }

3 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] dm-verity: restart or panic on an I/O error" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x e6a3531dd542cb127c8de32ab1e54a48ae19962b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100248-cycling-unseemly-7286@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: e6a3531dd542 ("dm-verity: restart or panic on an I/O error") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From e6a3531dd542cb127c8de32ab1e54a48ae19962b Mon Sep 17 00:00:00 2001 From: Mikulas Patocka <mpatocka(a)redhat.com> Date: Tue, 24 Sep 2024 15:18:29 +0200 Subject: [PATCH] dm-verity: restart or panic on an I/O error Maxim Suhanov reported that dm-verity doesn't crash if an I/O error happens. In theory, this could be used to subvert security, because an attacker can create sectors that return error with the Write Uncorrectable command. Some programs may misbehave if they have to deal with EIO. This commit fixes dm-verity, so that if "panic_on_corruption" or "restart_on_corruption" was specified and an I/O error happens, the machine will panic or restart. This commit also changes kernel_restart to emergency_restart - kernel_restart calls reboot notifiers and these reboot notifiers may wait for the bio that failed. emergency_restart doesn't call the notifiers. Reported-by: Maxim Suhanov <dfirblog(a)gmail.com> Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Cc: stable(a)vger.kernel.org diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index cf659c8feb29..a95c1b9cc5b5 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -272,8 +272,10 @@ static int verity_handle_err(struct dm_verity *v, enum verity_block_type type, if (v->mode == DM_VERITY_MODE_LOGGING) return 0; - if (v->mode == DM_VERITY_MODE_RESTART) - kernel_restart("dm-verity device corrupted"); + if (v->mode == DM_VERITY_MODE_RESTART) { + pr_emerg("dm-verity device corrupted\n"); + emergency_restart(); + } if (v->mode == DM_VERITY_MODE_PANIC) panic("dm-verity device corrupted"); @@ -596,6 +598,23 @@ static void verity_finish_io(struct dm_verity_io *io, blk_status_t status) if (!static_branch_unlikely(&use_bh_wq_enabled) || !io->in_bh) verity_fec_finish_io(io); + if (unlikely(status != BLK_STS_OK) && + unlikely(!(bio->bi_opf & REQ_RAHEAD)) && + !verity_is_system_shutting_down()) { + if (v->mode == DM_VERITY_MODE_RESTART || + v->mode == DM_VERITY_MODE_PANIC) + DMERR_LIMIT("%s has error: %s", v->data_dev->name, + blk_status_to_str(status)); + + if (v->mode == DM_VERITY_MODE_RESTART) { + pr_emerg("dm-verity device corrupted\n"); + emergency_restart(); + } + + if (v->mode == DM_VERITY_MODE_PANIC) + panic("dm-verity device corrupted"); + } + bio_endio(bio); }

3 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] i2c: xiic: Try re-initialization on bus busy timeout" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 1d4a1adbed2582444aaf97671858b7d12915bd05 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100219-purveyor-waffle-a828@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") ee1691d0ae10 ("i2c: xiic: improve error message when transfer fails to start") d663d93bb47e ("i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path") 294b29f15469 ("i2c: xiic: Fix RX IRQ busy check") c119e7d00c91 ("i2c: xiic: Fix broken locking on tx_msg") 9e3b184b3b4f ("i2c: xiic: Support forcing single-master in DT") 9106e45ceaaf ("i2c: xiic: Improve struct memory alignment") 0a9336ee133d ("i2c: xiic: Change code alignment to 1 space only") b4c119dbc300 ("i2c: xiic: Add timeout to the rx fifo wait loop") bcc156e2289d ("i2c: xiic: Fix kerneldoc warnings") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1d4a1adbed2582444aaf97671858b7d12915bd05 Mon Sep 17 00:00:00 2001 From: Robert Hancock <robert.hancock(a)calian.com> Date: Wed, 11 Sep 2024 22:16:53 +0200 Subject: [PATCH] i2c: xiic: Try re-initialization on bus busy timeout In the event that the I2C bus was powered down when the I2C controller driver loads, or some spurious pulses occur on the I2C bus, it's possible that the controller detects a spurious I2C "start" condition. In this situation it may continue to report the bus is busy indefinitely and block the controller from working. The "single-master" DT flag can be specified to disable bus busy checks entirely, but this may not be safe to use in situations where other I2C masters may potentially exist. In the event that the controller reports "bus busy" for too long when starting a transaction, we can try reinitializing the controller to see if the busy condition clears. This allows recovering from this scenario. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <robert.hancock(a)calian.com> Cc: <stable(a)vger.kernel.org> # v2.6.34+ Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli(a)amd.com> Acked-by: Michal Simek <michal.simek(a)amd.com> Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index bd6e107472b7..4c89aad02451 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -843,23 +843,11 @@ static int xiic_bus_busy(struct xiic_i2c *i2c) return (sr & XIIC_SR_BUS_BUSY_MASK) ? -EBUSY : 0; } -static int xiic_busy(struct xiic_i2c *i2c) +static int xiic_wait_not_busy(struct xiic_i2c *i2c) { int tries = 3; int err; - if (i2c->tx_msg || i2c->rx_msg) - return -EBUSY; - - /* In single master mode bus can only be busy, when in use by this - * driver. If the register indicates bus being busy for some reason we - * should ignore it, since bus will never be released and i2c will be - * stuck forever. - */ - if (i2c->singlemaster) { - return 0; - } - /* for instance if previous transfer was terminated due to TX error * it might be that the bus is on it's way to become available * give it at most 3 ms to wake @@ -1103,13 +1091,36 @@ static int xiic_start_xfer(struct xiic_i2c *i2c, struct i2c_msg *msgs, int num) mutex_lock(&i2c->lock); - ret = xiic_busy(i2c); - if (ret) { + if (i2c->tx_msg || i2c->rx_msg) { dev_err(i2c->adap.dev.parent, "cannot start a transfer while busy\n"); + ret = -EBUSY; goto out; } + /* In single master mode bus can only be busy, when in use by this + * driver. If the register indicates bus being busy for some reason we + * should ignore it, since bus will never be released and i2c will be + * stuck forever. + */ + if (!i2c->singlemaster) { + ret = xiic_wait_not_busy(i2c); + if (ret) { + /* If the bus is stuck in a busy state, such as due to spurious low + * pulses on the bus causing a false start condition to be detected, + * then try to recover by re-initializing the controller and check + * again if the bus is still busy. + */ + dev_warn(i2c->adap.dev.parent, "I2C bus busy timeout, reinitializing\n"); + ret = xiic_reinit(i2c); + if (ret) + goto out; + ret = xiic_wait_not_busy(i2c); + if (ret) + goto out; + } + } + i2c->tx_msg = msgs; i2c->rx_msg = NULL; i2c->nmsgs = num;

3 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] i2c: xiic: Try re-initialization on bus busy timeout" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x 1d4a1adbed2582444aaf97671858b7d12915bd05 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100220-hazard-sharper-437c@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") ee1691d0ae10 ("i2c: xiic: improve error message when transfer fails to start") d663d93bb47e ("i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path") 294b29f15469 ("i2c: xiic: Fix RX IRQ busy check") c119e7d00c91 ("i2c: xiic: Fix broken locking on tx_msg") 9e3b184b3b4f ("i2c: xiic: Support forcing single-master in DT") 9106e45ceaaf ("i2c: xiic: Improve struct memory alignment") 0a9336ee133d ("i2c: xiic: Change code alignment to 1 space only") b4c119dbc300 ("i2c: xiic: Add timeout to the rx fifo wait loop") bcc156e2289d ("i2c: xiic: Fix kerneldoc warnings") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1d4a1adbed2582444aaf97671858b7d12915bd05 Mon Sep 17 00:00:00 2001 From: Robert Hancock <robert.hancock(a)calian.com> Date: Wed, 11 Sep 2024 22:16:53 +0200 Subject: [PATCH] i2c: xiic: Try re-initialization on bus busy timeout In the event that the I2C bus was powered down when the I2C controller driver loads, or some spurious pulses occur on the I2C bus, it's possible that the controller detects a spurious I2C "start" condition. In this situation it may continue to report the bus is busy indefinitely and block the controller from working. The "single-master" DT flag can be specified to disable bus busy checks entirely, but this may not be safe to use in situations where other I2C masters may potentially exist. In the event that the controller reports "bus busy" for too long when starting a transaction, we can try reinitializing the controller to see if the busy condition clears. This allows recovering from this scenario. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <robert.hancock(a)calian.com> Cc: <stable(a)vger.kernel.org> # v2.6.34+ Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli(a)amd.com> Acked-by: Michal Simek <michal.simek(a)amd.com> Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index bd6e107472b7..4c89aad02451 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -843,23 +843,11 @@ static int xiic_bus_busy(struct xiic_i2c *i2c) return (sr & XIIC_SR_BUS_BUSY_MASK) ? -EBUSY : 0; } -static int xiic_busy(struct xiic_i2c *i2c) +static int xiic_wait_not_busy(struct xiic_i2c *i2c) { int tries = 3; int err; - if (i2c->tx_msg || i2c->rx_msg) - return -EBUSY; - - /* In single master mode bus can only be busy, when in use by this - * driver. If the register indicates bus being busy for some reason we - * should ignore it, since bus will never be released and i2c will be - * stuck forever. - */ - if (i2c->singlemaster) { - return 0; - } - /* for instance if previous transfer was terminated due to TX error * it might be that the bus is on it's way to become available * give it at most 3 ms to wake @@ -1103,13 +1091,36 @@ static int xiic_start_xfer(struct xiic_i2c *i2c, struct i2c_msg *msgs, int num) mutex_lock(&i2c->lock); - ret = xiic_busy(i2c); - if (ret) { + if (i2c->tx_msg || i2c->rx_msg) { dev_err(i2c->adap.dev.parent, "cannot start a transfer while busy\n"); + ret = -EBUSY; goto out; } + /* In single master mode bus can only be busy, when in use by this + * driver. If the register indicates bus being busy for some reason we + * should ignore it, since bus will never be released and i2c will be + * stuck forever. + */ + if (!i2c->singlemaster) { + ret = xiic_wait_not_busy(i2c); + if (ret) { + /* If the bus is stuck in a busy state, such as due to spurious low + * pulses on the bus causing a false start condition to be detected, + * then try to recover by re-initializing the controller and check + * again if the bus is still busy. + */ + dev_warn(i2c->adap.dev.parent, "I2C bus busy timeout, reinitializing\n"); + ret = xiic_reinit(i2c); + if (ret) + goto out; + ret = xiic_wait_not_busy(i2c); + if (ret) + goto out; + } + } + i2c->tx_msg = msgs; i2c->rx_msg = NULL; i2c->nmsgs = num;

3 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] i2c: xiic: Try re-initialization on bus busy timeout" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 1d4a1adbed2582444aaf97671858b7d12915bd05 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100218-unlovable-upon-1c43@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") ee1691d0ae10 ("i2c: xiic: improve error message when transfer fails to start") d663d93bb47e ("i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path") 294b29f15469 ("i2c: xiic: Fix RX IRQ busy check") c119e7d00c91 ("i2c: xiic: Fix broken locking on tx_msg") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1d4a1adbed2582444aaf97671858b7d12915bd05 Mon Sep 17 00:00:00 2001 From: Robert Hancock <robert.hancock(a)calian.com> Date: Wed, 11 Sep 2024 22:16:53 +0200 Subject: [PATCH] i2c: xiic: Try re-initialization on bus busy timeout In the event that the I2C bus was powered down when the I2C controller driver loads, or some spurious pulses occur on the I2C bus, it's possible that the controller detects a spurious I2C "start" condition. In this situation it may continue to report the bus is busy indefinitely and block the controller from working. The "single-master" DT flag can be specified to disable bus busy checks entirely, but this may not be safe to use in situations where other I2C masters may potentially exist. In the event that the controller reports "bus busy" for too long when starting a transaction, we can try reinitializing the controller to see if the busy condition clears. This allows recovering from this scenario. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <robert.hancock(a)calian.com> Cc: <stable(a)vger.kernel.org> # v2.6.34+ Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli(a)amd.com> Acked-by: Michal Simek <michal.simek(a)amd.com> Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index bd6e107472b7..4c89aad02451 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -843,23 +843,11 @@ static int xiic_bus_busy(struct xiic_i2c *i2c) return (sr & XIIC_SR_BUS_BUSY_MASK) ? -EBUSY : 0; } -static int xiic_busy(struct xiic_i2c *i2c) +static int xiic_wait_not_busy(struct xiic_i2c *i2c) { int tries = 3; int err; - if (i2c->tx_msg || i2c->rx_msg) - return -EBUSY; - - /* In single master mode bus can only be busy, when in use by this - * driver. If the register indicates bus being busy for some reason we - * should ignore it, since bus will never be released and i2c will be - * stuck forever. - */ - if (i2c->singlemaster) { - return 0; - } - /* for instance if previous transfer was terminated due to TX error * it might be that the bus is on it's way to become available * give it at most 3 ms to wake @@ -1103,13 +1091,36 @@ static int xiic_start_xfer(struct xiic_i2c *i2c, struct i2c_msg *msgs, int num) mutex_lock(&i2c->lock); - ret = xiic_busy(i2c); - if (ret) { + if (i2c->tx_msg || i2c->rx_msg) { dev_err(i2c->adap.dev.parent, "cannot start a transfer while busy\n"); + ret = -EBUSY; goto out; } + /* In single master mode bus can only be busy, when in use by this + * driver. If the register indicates bus being busy for some reason we + * should ignore it, since bus will never be released and i2c will be + * stuck forever. + */ + if (!i2c->singlemaster) { + ret = xiic_wait_not_busy(i2c); + if (ret) { + /* If the bus is stuck in a busy state, such as due to spurious low + * pulses on the bus causing a false start condition to be detected, + * then try to recover by re-initializing the controller and check + * again if the bus is still busy. + */ + dev_warn(i2c->adap.dev.parent, "I2C bus busy timeout, reinitializing\n"); + ret = xiic_reinit(i2c); + if (ret) + goto out; + ret = xiic_wait_not_busy(i2c); + if (ret) + goto out; + } + } + i2c->tx_msg = msgs; i2c->rx_msg = NULL; i2c->nmsgs = num;

3 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] i2c: xiic: Try re-initialization on bus busy timeout" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 1d4a1adbed2582444aaf97671858b7d12915bd05 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100217-schematic-oil-69e2@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") ee1691d0ae10 ("i2c: xiic: improve error message when transfer fails to start") d663d93bb47e ("i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path") 294b29f15469 ("i2c: xiic: Fix RX IRQ busy check") c119e7d00c91 ("i2c: xiic: Fix broken locking on tx_msg") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1d4a1adbed2582444aaf97671858b7d12915bd05 Mon Sep 17 00:00:00 2001 From: Robert Hancock <robert.hancock(a)calian.com> Date: Wed, 11 Sep 2024 22:16:53 +0200 Subject: [PATCH] i2c: xiic: Try re-initialization on bus busy timeout In the event that the I2C bus was powered down when the I2C controller driver loads, or some spurious pulses occur on the I2C bus, it's possible that the controller detects a spurious I2C "start" condition. In this situation it may continue to report the bus is busy indefinitely and block the controller from working. The "single-master" DT flag can be specified to disable bus busy checks entirely, but this may not be safe to use in situations where other I2C masters may potentially exist. In the event that the controller reports "bus busy" for too long when starting a transaction, we can try reinitializing the controller to see if the busy condition clears. This allows recovering from this scenario. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <robert.hancock(a)calian.com> Cc: <stable(a)vger.kernel.org> # v2.6.34+ Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli(a)amd.com> Acked-by: Michal Simek <michal.simek(a)amd.com> Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index bd6e107472b7..4c89aad02451 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -843,23 +843,11 @@ static int xiic_bus_busy(struct xiic_i2c *i2c) return (sr & XIIC_SR_BUS_BUSY_MASK) ? -EBUSY : 0; } -static int xiic_busy(struct xiic_i2c *i2c) +static int xiic_wait_not_busy(struct xiic_i2c *i2c) { int tries = 3; int err; - if (i2c->tx_msg || i2c->rx_msg) - return -EBUSY; - - /* In single master mode bus can only be busy, when in use by this - * driver. If the register indicates bus being busy for some reason we - * should ignore it, since bus will never be released and i2c will be - * stuck forever. - */ - if (i2c->singlemaster) { - return 0; - } - /* for instance if previous transfer was terminated due to TX error * it might be that the bus is on it's way to become available * give it at most 3 ms to wake @@ -1103,13 +1091,36 @@ static int xiic_start_xfer(struct xiic_i2c *i2c, struct i2c_msg *msgs, int num) mutex_lock(&i2c->lock); - ret = xiic_busy(i2c); - if (ret) { + if (i2c->tx_msg || i2c->rx_msg) { dev_err(i2c->adap.dev.parent, "cannot start a transfer while busy\n"); + ret = -EBUSY; goto out; } + /* In single master mode bus can only be busy, when in use by this + * driver. If the register indicates bus being busy for some reason we + * should ignore it, since bus will never be released and i2c will be + * stuck forever. + */ + if (!i2c->singlemaster) { + ret = xiic_wait_not_busy(i2c); + if (ret) { + /* If the bus is stuck in a busy state, such as due to spurious low + * pulses on the bus causing a false start condition to be detected, + * then try to recover by re-initializing the controller and check + * again if the bus is still busy. + */ + dev_warn(i2c->adap.dev.parent, "I2C bus busy timeout, reinitializing\n"); + ret = xiic_reinit(i2c); + if (ret) + goto out; + ret = xiic_wait_not_busy(i2c); + if (ret) + goto out; + } + } + i2c->tx_msg = msgs; i2c->rx_msg = NULL; i2c->nmsgs = num;

3 months, 1 week

1
0
0 0

FAILED: patch "[PATCH] i2c: xiic: Try re-initialization on bus busy timeout" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 1d4a1adbed2582444aaf97671858b7d12915bd05 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2024100216-baboon-arson-e49d@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: 1d4a1adbed25 ("i2c: xiic: Try re-initialization on bus busy timeout") ee1691d0ae10 ("i2c: xiic: improve error message when transfer fails to start") d663d93bb47e ("i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 1d4a1adbed2582444aaf97671858b7d12915bd05 Mon Sep 17 00:00:00 2001 From: Robert Hancock <robert.hancock(a)calian.com> Date: Wed, 11 Sep 2024 22:16:53 +0200 Subject: [PATCH] i2c: xiic: Try re-initialization on bus busy timeout In the event that the I2C bus was powered down when the I2C controller driver loads, or some spurious pulses occur on the I2C bus, it's possible that the controller detects a spurious I2C "start" condition. In this situation it may continue to report the bus is busy indefinitely and block the controller from working. The "single-master" DT flag can be specified to disable bus busy checks entirely, but this may not be safe to use in situations where other I2C masters may potentially exist. In the event that the controller reports "bus busy" for too long when starting a transaction, we can try reinitializing the controller to see if the busy condition clears. This allows recovering from this scenario. Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface") Signed-off-by: Robert Hancock <robert.hancock(a)calian.com> Cc: <stable(a)vger.kernel.org> # v2.6.34+ Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli(a)amd.com> Acked-by: Michal Simek <michal.simek(a)amd.com> Signed-off-by: Andi Shyti <andi.shyti(a)kernel.org> diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index bd6e107472b7..4c89aad02451 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -843,23 +843,11 @@ static int xiic_bus_busy(struct xiic_i2c *i2c) return (sr & XIIC_SR_BUS_BUSY_MASK) ? -EBUSY : 0; } -static int xiic_busy(struct xiic_i2c *i2c) +static int xiic_wait_not_busy(struct xiic_i2c *i2c) { int tries = 3; int err; - if (i2c->tx_msg || i2c->rx_msg) - return -EBUSY; - - /* In single master mode bus can only be busy, when in use by this - * driver. If the register indicates bus being busy for some reason we - * should ignore it, since bus will never be released and i2c will be - * stuck forever. - */ - if (i2c->singlemaster) { - return 0; - } - /* for instance if previous transfer was terminated due to TX error * it might be that the bus is on it's way to become available * give it at most 3 ms to wake @@ -1103,13 +1091,36 @@ static int xiic_start_xfer(struct xiic_i2c *i2c, struct i2c_msg *msgs, int num) mutex_lock(&i2c->lock); - ret = xiic_busy(i2c); - if (ret) { + if (i2c->tx_msg || i2c->rx_msg) { dev_err(i2c->adap.dev.parent, "cannot start a transfer while busy\n"); + ret = -EBUSY; goto out; } + /* In single master mode bus can only be busy, when in use by this + * driver. If the register indicates bus being busy for some reason we + * should ignore it, since bus will never be released and i2c will be + * stuck forever. + */ + if (!i2c->singlemaster) { + ret = xiic_wait_not_busy(i2c); + if (ret) { + /* If the bus is stuck in a busy state, such as due to spurious low + * pulses on the bus causing a false start condition to be detected, + * then try to recover by re-initializing the controller and check + * again if the bus is still busy. + */ + dev_warn(i2c->adap.dev.parent, "I2C bus busy timeout, reinitializing\n"); + ret = xiic_reinit(i2c); + if (ret) + goto out; + ret = xiic_wait_not_busy(i2c); + if (ret) + goto out; + } + } + i2c->tx_msg = msgs; i2c->rx_msg = NULL; i2c->nmsgs = num;

3 months, 1 week

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2024