January 2024 - Linux-stable-mirror

patch "serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 8a1060ce974919f2a79807527ad82ac39336eda2 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:08 -0500 Subject: serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error If an error occurs during probing, the sc16is7xx_lines bitfield may be left in a state that doesn't represent the correct state of lines allocation. For example, in a system with two SC16 devices, if an error occurs only during probing of channel (port) B of the second device, sc16is7xx_lines final state will be 00001011b instead of the expected 00000011b. This is caused in part because of the "i--" in the for/loop located in the out_ports: error path. Fix this by checking the return value of uart_add_one_port() and set line allocation bit only if this was successful. This allows the refactor of the obfuscated for(i--...) loop in the error path, and properly call uart_remove_one_port() only when needed, and properly unset line allocation bits. Also use same mechanism in remove() when calling uart_remove_one_port(). Fixes: c64349722d14 ("sc16is7xx: support multiple devices") Cc: <stable(a)vger.kernel.org> Cc: Yury Norov <yury.norov(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sc16is7xx.c | 44 ++++++++++++++-------------------- 1 file changed, 18 insertions(+), 26 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index e40e4a99277e..17b90f971f96 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -407,19 +407,6 @@ static void sc16is7xx_port_update(struct uart_port *port, u8 reg, regmap_update_bits(one->regmap, reg, mask, val); } -static int sc16is7xx_alloc_line(void) -{ - int i; - - BUILD_BUG_ON(SC16IS7XX_MAX_DEVS > BITS_PER_LONG); - - for (i = 0; i < SC16IS7XX_MAX_DEVS; i++) - if (!test_and_set_bit(i, &sc16is7xx_lines)) - break; - - return i; -} - static void sc16is7xx_power(struct uart_port *port, int on) { sc16is7xx_port_update(port, SC16IS7XX_IER_REG, @@ -1550,6 +1537,13 @@ static int sc16is7xx_probe(struct device *dev, SC16IS7XX_IOCONTROL_SRESET_BIT); for (i = 0; i < devtype->nr_uart; ++i) { + s->p[i].port.line = find_first_zero_bit(&sc16is7xx_lines, + SC16IS7XX_MAX_DEVS); + if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { + ret = -ERANGE; + goto out_ports; + } + /* Initialize port data */ s->p[i].port.dev = dev; s->p[i].port.irq = irq; @@ -1569,14 +1563,8 @@ static int sc16is7xx_probe(struct device *dev, s->p[i].port.rs485_supported = sc16is7xx_rs485_supported; s->p[i].port.ops = &sc16is7xx_ops; s->p[i].old_mctrl = 0; - s->p[i].port.line = sc16is7xx_alloc_line(); s->p[i].regmap = regmaps[i]; - if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) { - ret = -ENOMEM; - goto out_ports; - } - mutex_init(&s->p[i].efr_lock); ret = uart_get_rs485_mode(&s->p[i].port); @@ -1594,8 +1582,13 @@ static int sc16is7xx_probe(struct device *dev, kthread_init_work(&s->p[i].tx_work, sc16is7xx_tx_proc); kthread_init_work(&s->p[i].reg_work, sc16is7xx_reg_proc); kthread_init_delayed_work(&s->p[i].ms_work, sc16is7xx_ms_proc); + /* Register port */ - uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + ret = uart_add_one_port(&sc16is7xx_uart, &s->p[i].port); + if (ret) + goto out_ports; + + set_bit(s->p[i].port.line, &sc16is7xx_lines); /* Enable EFR */ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_LCR_REG, @@ -1653,10 +1646,9 @@ static int sc16is7xx_probe(struct device *dev, #endif out_ports: - for (i--; i >= 0; i--) { - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); - } + for (i = 0; i < devtype->nr_uart; i++) + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); kthread_stop(s->kworker_task); @@ -1678,8 +1670,8 @@ static void sc16is7xx_remove(struct device *dev) for (i = 0; i < s->devtype->nr_uart; i++) { kthread_cancel_delayed_work_sync(&s->p[i].ms_work); - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); + if (test_and_clear_bit(s->p[i].port.line, &sc16is7xx_lines)) + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); sc16is7xx_power(&s->p[i].port, 0); } -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: 8250_exar: Set missing rs485_supported flag" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: 8250_exar: Set missing rs485_supported flag to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 0c2a5f471ce58bca8f8ab5fcb911aff91eaaa5eb Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Date: Wed, 3 Jan 2024 07:18:18 +0100 Subject: serial: 8250_exar: Set missing rs485_supported flag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The UART supports an auto-RTS mode in which the RTS pin is automatically activated during transmission. So mark this mode as being supported even if RTS is not controlled by the driver but the UART. Also the serial core expects now at least one of both modes rts-on-send or rts-after-send to be supported. This is since during sanitization unsupported flags are deleted from a RS485 configuration set by userspace. However if the configuration ends up with both flags unset, the core prints a warning since it considers such a configuration invalid (see uart_sanitize_serial_rs485()). Cc: <stable(a)vger.kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-8-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/8250/8250_exar.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index 6085d356ad86..23366f868ae3 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -480,7 +480,7 @@ static int sealevel_rs485_config(struct uart_port *port, struct ktermios *termio } static const struct serial_rs485 generic_rs485_supported = { - .flags = SER_RS485_ENABLED, + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND, }; static const struct exar8250_platform exar8250_default_platform = { @@ -524,7 +524,8 @@ static int iot2040_rs485_config(struct uart_port *port, struct ktermios *termios } static const struct serial_rs485 iot2040_rs485_supported = { - .flags = SER_RS485_ENABLED | SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS, + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RX_DURING_TX | SER_RS485_TERMINATE_BUS, }; static const struct property_entry iot2040_gpio_properties[] = { -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: omap: do not override settings for RS485 support" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: omap: do not override settings for RS485 support to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 51f93776b84dee23e44a7be880736669a01cec2b Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Date: Wed, 3 Jan 2024 07:18:17 +0100 Subject: serial: omap: do not override settings for RS485 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The drivers RS485 support is deactivated if there is no RTS GPIO available. This is done by nullifying the ports rs485_supported struct. After that however the settings in serial_omap_rs485_supported are assigned to the same structure unconditionally, which results in an unintended reactivation of RS485 support. Fix this by moving the assignment to the beginning of serial_omap_probe_rs485() and thus before uart_get_rs485_mode() gets called. Also replace the assignment of rs485_config() to have the complete RS485 setup in one function. Fixes: e2752ae3cfc9 ("serial: omap: Disallow RS-485 if rts-gpio is not specified") Cc: <stable(a)vger.kernel.org> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Link: https://lore.kernel.org/r/20240103061818.564-7-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/omap-serial.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 730755621879..f5a0b401af63 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1483,6 +1483,13 @@ static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) return omap_up_info; } +static const struct serial_rs485 serial_omap_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | + SER_RS485_RX_DURING_TX, + .delay_rts_before_send = 1, + .delay_rts_after_send = 1, +}; + static int serial_omap_probe_rs485(struct uart_omap_port *up, struct device *dev) { @@ -1497,6 +1504,9 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, if (!np) return 0; + up->port.rs485_config = serial_omap_config_rs485; + up->port.rs485_supported = serial_omap_rs485_supported; + ret = uart_get_rs485_mode(&up->port); if (ret) return ret; @@ -1531,13 +1541,6 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up, return 0; } -static const struct serial_rs485 serial_omap_rs485_supported = { - .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | - SER_RS485_RX_DURING_TX, - .delay_rts_before_send = 1, - .delay_rts_after_send = 1, -}; - static int serial_omap_probe(struct platform_device *pdev) { struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev); @@ -1604,17 +1607,11 @@ static int serial_omap_probe(struct platform_device *pdev) dev_info(up->port.dev, "no wakeirq for uart%d\n", up->port.line); - ret = serial_omap_probe_rs485(up, &pdev->dev); - if (ret < 0) - goto err_rs485; - sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; up->port.membase = base; up->port.flags = omap_up_info->flags; up->port.uartclk = omap_up_info->uartclk; - up->port.rs485_config = serial_omap_config_rs485; - up->port.rs485_supported = serial_omap_rs485_supported; if (!up->port.uartclk) { up->port.uartclk = DEFAULT_CLK_SPEED; dev_warn(&pdev->dev, @@ -1622,6 +1619,10 @@ static int serial_omap_probe(struct platform_device *pdev) DEFAULT_CLK_SPEED); } + ret = serial_omap_probe_rs485(up, &pdev->dev); + if (ret < 0) + goto err_rs485; + up->latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; up->calc_latency = PM_QOS_CPU_LATENCY_DEFAULT_VALUE; cpu_latency_qos_add_request(&up->pm_qos_request, up->latency); -- 2.43.0

1 year, 4 months

1
0
0 0

patch "usb: dwc: ep0: Update request status in dwc3_ep0_stall_restart" added to usb-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc: ep0: Update request status in dwc3_ep0_stall_restart to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From e9d40b215e38480fd94c66b06d79045717a59e9c Mon Sep 17 00:00:00 2001 From: Uttkarsh Aggarwal <quic_uaggarwa(a)quicinc.com> Date: Fri, 22 Dec 2023 15:17:04 +0530 Subject: usb: dwc: ep0: Update request status in dwc3_ep0_stall_restart Current implementation blocks the running operations when Plug-out and Plug-In is performed continuously, process gets stuck in dwc3_thread_interrupt(). Code Flow: CPU1 ->Gadget_start ->dwc3_interrupt ->dwc3_thread_interrupt ->dwc3_process_event_buf ->dwc3_process_event_entry ->dwc3_endpoint_interrupt ->dwc3_ep0_interrupt ->dwc3_ep0_inspect_setup ->dwc3_ep0_stall_and_restart By this time if pending_list is not empty, it will get the next request on the given list and calls dwc3_gadget_giveback which will unmap request and call its complete() callback to notify upper layers that it has completed. Currently dwc3_gadget_giveback status is set to -ECONNRESET, whereas it should be -ESHUTDOWN based on condition if not dwc->connected is true. Cc: <stable(a)vger.kernel.org> Fixes: d742220b3577 ("usb: dwc3: ep0: giveback requests on stall_and_restart") Signed-off-by: Uttkarsh Aggarwal <quic_uaggarwa(a)quicinc.com> Link: https://lore.kernel.org/r/20231222094704.20276-1-quic_uaggarwa@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc3/ep0.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index b94243237293..6ae8a36f21cf 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -238,7 +238,10 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) struct dwc3_request *req; req = next_request(&dep->pending_list); - dwc3_gadget_giveback(dep, req, -ECONNRESET); + if (!dwc->connected) + dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + else + dwc3_gadget_giveback(dep, req, -ECONNRESET); } dwc->eps[0]->trb_enqueue = 0; -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: core, imx: do not set RS485 enabled if it is not supported" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: core, imx: do not set RS485 enabled if it is not supported to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 74eab89b26ac433ad857292f4707b43c1a8f0209 Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Date: Wed, 3 Jan 2024 07:18:16 +0100 Subject: serial: core, imx: do not set RS485 enabled if it is not supported MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the imx driver cannot support RS485 it nullifies the ports rs485_supported structure. But it still calls uart_get_rs485_mode() which may set the RS485_ENABLED flag nevertheless. This may lead to an attempt to configure RS485 even if it is not supported when the flag is evaluated in uart_configure_port() at port startup. Avoid this by bailing out of uart_get_rs485_mode() if the RS485_ENABLED flag is not supported by the caller. With this fix a check for RTS availability is now obsolete in the imx driver, since it can not evaluate to true any more. So remove this check. Furthermore the explicit nullifcation of rs485_supported is not needed, since the memory has already been set to zeros at allocation. So remove this, too. Fixes: 00d7a00e2a6f ("serial: imx: Fill in rs485_supported") Cc: Shawn Guo <shawnguo(a)kernel.org> Cc: Sascha Hauer <s.hauer(a)pengutronix.de> Cc: <stable(a)vger.kernel.org> Suggested-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Link: https://lore.kernel.org/r/20240103061818.564-6-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/imx.c | 7 ------- drivers/tty/serial/serial_core.c | 3 +++ 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 8b7d9c5a7455..4aa72d5aeafb 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2211,7 +2211,6 @@ static enum hrtimer_restart imx_trigger_stop_tx(struct hrtimer *t) return HRTIMER_NORESTART; } -static const struct serial_rs485 imx_no_rs485 = {}; /* No RS485 if no RTS */ static const struct serial_rs485 imx_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND | SER_RS485_RX_DURING_TX, @@ -2295,8 +2294,6 @@ static int imx_uart_probe(struct platform_device *pdev) /* RTS is required to control the RS485 transmitter */ if (sport->have_rtscts || sport->have_rtsgpio) sport->port.rs485_supported = imx_rs485_supported; - else - sport->port.rs485_supported = imx_no_rs485; sport->port.flags = UPF_BOOT_AUTOCONF; timer_setup(&sport->timer, imx_uart_timeout, 0); @@ -2331,10 +2328,6 @@ static int imx_uart_probe(struct platform_device *pdev) if (ret) goto err_clk; - if (sport->port.rs485.flags & SER_RS485_ENABLED && - (!sport->have_rtscts && !sport->have_rtsgpio)) - dev_err(&pdev->dev, "no RTS control, disabling rs485\n"); - /* * If using the i.MX UART RTS/CTS control then the RTS (CTS_B) * signal cannot be set low during transmission in case the diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index b9606db78c92..b56ed8c376b2 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3607,6 +3607,9 @@ int uart_get_rs485_mode(struct uart_port *port) u32 rs485_delay[2]; int ret; + if (!(port->rs485_supported.flags & SER_RS485_ENABLED)) + return 0; + ret = device_property_read_u32_array(dev, "rs485-rts-delay", rs485_delay, 2); if (!ret) { -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: core: make sure RS485 cannot be enabled when it is not" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: core: make sure RS485 cannot be enabled when it is not to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From c73986913fa47e71e0b1ad7f039f6444915e8810 Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Date: Wed, 3 Jan 2024 07:18:15 +0100 Subject: serial: core: make sure RS485 cannot be enabled when it is not supported MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some uart drivers specify a rs485_config() function and then decide later to disable RS485 support for some reason (e.g. imx and ar933). In these cases userspace may be able to activate RS485 via TIOCSRS485 nevertheless, since in uart_set_rs485_config() an existing rs485_config() function indicates that RS485 is supported. Make sure that this is not longer possible by checking the uarts rs485_supported.flags instead and bailing out if SER_RS485_ENABLED is not set. Furthermore instead of returning an empty structure return -ENOTTY if the RS485 configuration is requested via TIOCGRS485 but RS485 is not supported. This has a small impact on userspace visibility but it is consistent with the -ENOTTY error for TIOCGRS485. Fixes: e849145e1fdd ("serial: ar933x: Fill in rs485_supported") Fixes: 55e18c6b6d42 ("serial: imx: Remove serial_rs485 sanitization") Cc: Shawn Guo <shawnguo(a)kernel.org> Cc: Sascha Hauer <s.hauer(a)pengutronix.de> Cc: <stable(a)vger.kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-5-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/serial_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index cd8c3a70455e..b9606db78c92 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1474,7 +1474,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, int ret; unsigned long flags; - if (!port->rs485_config) + if (!(port->rs485_supported.flags & SER_RS485_ENABLED)) return -ENOTTY; if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user))) -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: core: fix sanitizing check for RTS settings" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: core: fix sanitizing check for RTS settings to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 4afeced55baa391490b61ed9164867e2927353ed Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Date: Wed, 3 Jan 2024 07:18:14 +0100 Subject: serial: core: fix sanitizing check for RTS settings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Among other things uart_sanitize_serial_rs485() tests the sanity of the RTS settings in a RS485 configuration that has been passed by userspace. If RTS-on-send and RTS-after-send are both set or unset the configuration is adjusted and RTS-after-send is disabled and RTS-on-send enabled. This however makes only sense if both RTS modes are actually supported by the driver. With commit be2e2cb1d281 ("serial: Sanitize rs485_struct") the code does take the driver support into account but only checks if one of both RTS modes are supported. This may lead to the errorneous result of RTS-on-send being set even if only RTS-after-send is supported. Fix this by changing the implemented logic: First clear all unsupported flags in the RS485 configuration, then adjust an invalid RTS setting by taking into account which RTS mode is supported. Cc: <stable(a)vger.kernel.org> Fixes: be2e2cb1d281 ("serial: Sanitize rs485_struct") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-4-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/serial_core.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 850f24cc53e5..cd8c3a70455e 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1376,20 +1376,28 @@ static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs4 return; } - /* Pick sane settings if the user hasn't */ - if ((supported_flags & (SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND)) && - !(rs485->flags & SER_RS485_RTS_ON_SEND) == - !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) { - dev_warn_ratelimited(port->dev, - "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n", - port->name, port->line); - rs485->flags |= SER_RS485_RTS_ON_SEND; - rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; - supported_flags |= SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND; - } - rs485->flags &= supported_flags; + /* Pick sane settings if the user hasn't */ + if (!(rs485->flags & SER_RS485_RTS_ON_SEND) == + !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) { + if (supported_flags & SER_RS485_RTS_ON_SEND) { + rs485->flags |= SER_RS485_RTS_ON_SEND; + rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; + + dev_warn_ratelimited(port->dev, + "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n", + port->name, port->line); + } else { + rs485->flags |= SER_RS485_RTS_AFTER_SEND; + rs485->flags &= ~SER_RS485_RTS_ON_SEND; + + dev_warn_ratelimited(port->dev, + "%s (%d): invalid RTS setting, using RTS_AFTER_SEND instead\n", + port->name, port->line); + } + } + uart_sanitize_serial_rs485_delays(port, rs485); /* Return clean padding area to userspace */ -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: core: set missing supported flag for RX during TX GPIO" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: core: set missing supported flag for RX during TX GPIO to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 1a33e33ca0e80d485458410f149265cdc0178cfa Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Date: Wed, 3 Jan 2024 07:18:13 +0100 Subject: serial: core: set missing supported flag for RX during TX GPIO MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the RS485 feature RX-during-TX is supported by means of a GPIO set the according supported flag. Otherwise setting this feature from userspace may not be possible, since in uart_sanitize_serial_rs485() the passed RS485 configuration is matched against the supported features and unsupported settings are thereby removed and thus take no effect. Cc: <stable(a)vger.kernel.org> Fixes: 163f080eb717 ("serial: core: Add option to output RS485 RX_DURING_TX state via GPIO") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen(a)linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-3-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/serial_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 8d381c283cec..850f24cc53e5 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -3649,6 +3649,8 @@ int uart_get_rs485_mode(struct uart_port *port) if (IS_ERR(desc)) return dev_err_probe(dev, PTR_ERR(desc), "Cannot get rs485-rx-during-tx-gpios\n"); port->rs485_rx_during_tx_gpio = desc; + if (port->rs485_rx_during_tx_gpio) + port->rs485_supported.flags |= SER_RS485_RX_DURING_TX; return 0; } -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: Do not hold the port lock when setting rx-during-tx GPIO" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: Do not hold the port lock when setting rx-during-tx GPIO to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 07c30ea5861fb26a77dade8cdc787252f6122fb1 Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Date: Wed, 3 Jan 2024 07:18:12 +0100 Subject: serial: Do not hold the port lock when setting rx-during-tx GPIO Both the imx and stm32 driver set the rx-during-tx GPIO in rs485_config(). Since this function is called with the port lock held, this can be a problem in case that setting the GPIO line can sleep (e.g. if a GPIO expander is used which is connected via SPI or I2C). Avoid this issue by moving the GPIO setting outside of the port lock into the serial core and thus making it a generic feature. Also with commit c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO") the SER_RS485_RX_DURING_TX flag is only set if a rx-during-tx GPIO is _not_ available, which is wrong. Fix this, too. Furthermore reset old GPIO settings in case that changing the RS485 configuration failed. Fixes: c54d48543689 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO") Fixes: ca530cfa968c ("serial: imx: Add support for RS485 RX_DURING_TX output GPIO") Cc: Shawn Guo <shawnguo(a)kernel.org> Cc: Sascha Hauer <s.hauer(a)pengutronix.de> Cc: <stable(a)vger.kernel.org> Signed-off-by: Lino Sanfilippo <l.sanfilippo(a)kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-2-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/imx.c | 4 ---- drivers/tty/serial/serial_core.c | 26 ++++++++++++++++++++++++-- drivers/tty/serial/stm32-usart.c | 8 ++------ 3 files changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index a0fcf18cbeac..8b7d9c5a7455 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1948,10 +1948,6 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio rs485conf->flags & SER_RS485_RX_DURING_TX) imx_uart_start_rx(port); - if (port->rs485_rx_during_tx_gpio) - gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, - !!(rs485conf->flags & SER_RS485_RX_DURING_TX)); - return 0; } diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index cc866da50b81..8d381c283cec 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1407,6 +1407,16 @@ static void uart_set_rs485_termination(struct uart_port *port, !!(rs485->flags & SER_RS485_TERMINATE_BUS)); } +static void uart_set_rs485_rx_during_tx(struct uart_port *port, + const struct serial_rs485 *rs485) +{ + if (!(rs485->flags & SER_RS485_ENABLED)) + return; + + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, + !!(rs485->flags & SER_RS485_RX_DURING_TX)); +} + static int uart_rs485_config(struct uart_port *port) { struct serial_rs485 *rs485 = &port->rs485; @@ -1418,12 +1428,17 @@ static int uart_rs485_config(struct uart_port *port) uart_sanitize_serial_rs485(port, rs485); uart_set_rs485_termination(port, rs485); + uart_set_rs485_rx_during_tx(port, rs485); uart_port_lock_irqsave(port, &flags); ret = port->rs485_config(port, NULL, rs485); uart_port_unlock_irqrestore(port, flags); - if (ret) + if (ret) { memset(rs485, 0, sizeof(*rs485)); + /* unset GPIOs */ + gpiod_set_value_cansleep(port->rs485_term_gpio, 0); + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, 0); + } return ret; } @@ -1462,6 +1477,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, return ret; uart_sanitize_serial_rs485(port, &rs485); uart_set_rs485_termination(port, &rs485); + uart_set_rs485_rx_during_tx(port, &rs485); uart_port_lock_irqsave(port, &flags); ret = port->rs485_config(port, &tty->termios, &rs485); @@ -1473,8 +1489,14 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port, port->ops->set_mctrl(port, port->mctrl); } uart_port_unlock_irqrestore(port, flags); - if (ret) + if (ret) { + /* restore old GPIO settings */ + gpiod_set_value_cansleep(port->rs485_term_gpio, + !!(port->rs485.flags & SER_RS485_TERMINATE_BUS)); + gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, + !!(port->rs485.flags & SER_RS485_RX_DURING_TX)); return ret; + } if (copy_to_user(rs485_user, &port->rs485, sizeof(port->rs485))) return -EFAULT; diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 9781c143def2..794b77512740 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -226,12 +226,6 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter stm32_usart_clr_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit)); - if (port->rs485_rx_during_tx_gpio) - gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, - !!(rs485conf->flags & SER_RS485_RX_DURING_TX)); - else - rs485conf->flags |= SER_RS485_RX_DURING_TX; - if (rs485conf->flags & SER_RS485_ENABLED) { cr1 = readl_relaxed(port->membase + ofs->cr1); cr3 = readl_relaxed(port->membase + ofs->cr3); @@ -256,6 +250,8 @@ static int stm32_usart_config_rs485(struct uart_port *port, struct ktermios *ter writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr1, port->membase + ofs->cr1); + + rs485conf->flags |= SER_RS485_RX_DURING_TX; } else { stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DEM | USART_CR3_DEP); -- 2.43.0

1 year, 4 months

1
0
0 0

[RESEND PATCH 1/2] PM / devfreq: Fix buffer overflow in trans_stat_show

by Christian Marangi

Fix buffer overflow in trans_stat_show(). Convert simple snprintf to the more secure scnprintf with size of PAGE_SIZE. Add condition checking if we are exceeding PAGE_SIZE and exit early from loop. Also add at the end a warning that we exceeded PAGE_SIZE and that stats is disabled. Return -EFBIG in the case where we don't have enough space to write the full transition table. Also document in the ABI that this function can return -EFBIG error. Cc: stable(a)vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218041 Fixes: e552bbaf5b98 ("PM / devfreq: Add sysfs node for representing frequency transition information.") Signed-off-by: Christian Marangi <ansuelsmth(a)gmail.com> --- Documentation/ABI/testing/sysfs-class-devfreq | 3 + drivers/devfreq/devfreq.c | 57 +++++++++++++------ 2 files changed, 42 insertions(+), 18 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-class-devfreq b/Documentation/ABI/testing/sysfs-class-devfreq index 5e6b74f30406..1e7e0bb4c14e 100644 --- a/Documentation/ABI/testing/sysfs-class-devfreq +++ b/Documentation/ABI/testing/sysfs-class-devfreq @@ -52,6 +52,9 @@ Description: echo 0 > /sys/class/devfreq/.../trans_stat + If the transition table is bigger than PAGE_SIZE, reading + this will return an -EFBIG error. + What: /sys/class/devfreq/.../available_frequencies Date: October 2012 Contact: Nishanth Menon <nm(a)ti.com> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index 63347a5ae599..8459512d9b07 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -1688,7 +1688,7 @@ static ssize_t trans_stat_show(struct device *dev, struct device_attribute *attr, char *buf) { struct devfreq *df = to_devfreq(dev); - ssize_t len; + ssize_t len = 0; int i, j; unsigned int max_state; @@ -1697,7 +1697,7 @@ static ssize_t trans_stat_show(struct device *dev, max_state = df->max_state; if (max_state == 0) - return sprintf(buf, "Not Supported.\n"); + return scnprintf(buf, PAGE_SIZE, "Not Supported.\n"); mutex_lock(&df->lock); if (!df->stop_polling && @@ -1707,31 +1707,52 @@ static ssize_t trans_stat_show(struct device *dev, } mutex_unlock(&df->lock); - len = sprintf(buf, " From : To\n"); - len += sprintf(buf + len, " :"); - for (i = 0; i < max_state; i++) - len += sprintf(buf + len, "%10lu", - df->freq_table[i]); + len += scnprintf(buf + len, PAGE_SIZE - len, " From : To\n"); + len += scnprintf(buf + len, PAGE_SIZE - len, " :"); + for (i = 0; i < max_state; i++) { + if (len >= PAGE_SIZE - 1) + break; + len += scnprintf(buf + len, PAGE_SIZE - len, "%10lu", + df->freq_table[i]); + } + if (len >= PAGE_SIZE - 1) + return PAGE_SIZE - 1; - len += sprintf(buf + len, " time(ms)\n"); + len += scnprintf(buf + len, PAGE_SIZE - len, " time(ms)\n"); for (i = 0; i < max_state; i++) { + if (len >= PAGE_SIZE - 1) + break; if (df->freq_table[i] == df->previous_freq) - len += sprintf(buf + len, "*"); + len += scnprintf(buf + len, PAGE_SIZE - len, "*"); else - len += sprintf(buf + len, " "); + len += scnprintf(buf + len, PAGE_SIZE - len, " "); + if (len >= PAGE_SIZE - 1) + break; + + len += scnprintf(buf + len, PAGE_SIZE - len, "%10lu:", + df->freq_table[i]); + for (j = 0; j < max_state; j++) { + if (len >= PAGE_SIZE - 1) + break; + len += scnprintf(buf + len, PAGE_SIZE - len, "%10u", + df->stats.trans_table[(i * max_state) + j]); + } + if (len >= PAGE_SIZE - 1) + break; + len += scnprintf(buf + len, PAGE_SIZE - len, "%10llu\n", (u64) + jiffies64_to_msecs(df->stats.time_in_state[i])); + } - len += sprintf(buf + len, "%10lu:", df->freq_table[i]); - for (j = 0; j < max_state; j++) - len += sprintf(buf + len, "%10u", - df->stats.trans_table[(i * max_state) + j]); + if (len < PAGE_SIZE - 1) + len += scnprintf(buf + len, PAGE_SIZE - len, "Total transition : %u\n", + df->stats.total_trans); - len += sprintf(buf + len, "%10llu\n", (u64) - jiffies64_to_msecs(df->stats.time_in_state[i])); + if (len >= PAGE_SIZE - 1) { + pr_warn_once("devfreq transition table exceeds PAGE_SIZE. Disabling\n"); + return -EFBIG; } - len += sprintf(buf + len, "Total transition : %u\n", - df->stats.total_trans); return len; } -- 2.43.0

1 year, 4 months

3
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2024