January 2024 - Linux-stable-mirror

patch "usb: chipidea: wait controller resume finished for wakeup irq" added to usb-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: chipidea: wait controller resume finished for wakeup irq to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 128d849074d05545becf86e713715ce7676fc074 Mon Sep 17 00:00:00 2001 From: Xu Yang <xu.yang_2(a)nxp.com> Date: Thu, 28 Dec 2023 19:07:52 +0800 Subject: usb: chipidea: wait controller resume finished for wakeup irq After the chipidea driver introduce extcon for id and vbus, it's able to wakeup from another irq source, in case the system with extcon ID cable, wakeup from usb ID cable and device removal, the usb device disconnect irq may come firstly before the extcon notifier while system resume, so we will get 2 "wakeup" irq, one for usb device disconnect; and one for extcon ID cable change(real wakeup event), current driver treat them as 2 successive wakeup irq so can't handle it correctly, then finally the usb irq can't be enabled. This patch adds a check to bypass further usb events before controller resume finished to fix it. Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management support") cc: <stable(a)vger.kernel.org> Acked-by: Peter Chen <peter.chen(a)kernel.org> Signed-off-by: Xu Yang <xu.yang_2(a)nxp.com> Signed-off-by: Li Jun <jun.li(a)nxp.com> Link: https://lore.kernel.org/r/20231228110753.1755756-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/chipidea/core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 0af9e68035fb..41014f93cfdf 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -523,6 +523,13 @@ static irqreturn_t ci_irq_handler(int irq, void *data) u32 otgsc = 0; if (ci->in_lpm) { + /* + * If we already have a wakeup irq pending there, + * let's just return to wait resume finished firstly. + */ + if (ci->wakeup_int) + return IRQ_HANDLED; + disable_irq_nosync(irq); ci->wakeup_int = true; pm_runtime_get(ci->dev); -- 2.43.0

1 year, 4 months

1
0
0 0

patch "usb: phy: mxs: remove CONFIG_USB_OTG condition for" added to usb-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: phy: mxs: remove CONFIG_USB_OTG condition for to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From ff2b89de471da942a4d853443688113a44fd35ed Mon Sep 17 00:00:00 2001 From: Xu Yang <xu.yang_2(a)nxp.com> Date: Thu, 28 Dec 2023 19:07:53 +0800 Subject: usb: phy: mxs: remove CONFIG_USB_OTG condition for mxs_phy_is_otg_host() When CONFIG_USB_OTG is not set, mxs_phy_is_otg_host() will always return false. This behaviour is wrong. Since phy.last_event will always be set for either host or device mode. Therefore, CONFIG_USB_OTG condition can be removed. Fixes: 5eda42aebb76 ("usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()") cc: <stable(a)vger.kernel.org> Acked-by: Peter Chen <peter.chen(a)kernel.org> Signed-off-by: Xu Yang <xu.yang_2(a)nxp.com> Link: https://lore.kernel.org/r/20231228110753.1755756-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/phy/phy-mxs-usb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index acd46b72899e..920a32cd094d 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -388,8 +388,7 @@ static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect) static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy) { - return IS_ENABLED(CONFIG_USB_OTG) && - mxs_phy->phy.last_event == USB_EVENT_ID; + return mxs_phy->phy.last_event == USB_EVENT_ID; } static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on) -- 2.43.0

1 year, 4 months

1
0
0 0

patch "Revert "usb: gadget: f_uvc: change endpoint allocation in" added to usb-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Revert "usb: gadget: f_uvc: change endpoint allocation in to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 895ee5aefb7e24203de5dffae7ce9a02d78fa3d1 Mon Sep 17 00:00:00 2001 From: Frank Li <Frank.Li(a)nxp.com> Date: Sun, 24 Dec 2023 10:38:16 -0500 Subject: Revert "usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()" This reverts commit 3c5b006f3ee800b4bd9ed37b3a8f271b8560126e. gadget_is_{super|dual}speed() API check UDC controller capitblity. It should pass down highest speed endpoint descriptor to UDC controller. So UDC controller driver can reserve enough resource at check_config(), especially mult and maxburst. So UDC driver (such as cdns3) can know need at least (mult + 1) * (maxburst + 1) * wMaxPacketSize internal memory for this uvc functions. Cc: <stable(a)vger.kernel.org> Signed-off-by: Frank Li <Frank.Li(a)nxp.com> Link: https://lore.kernel.org/r/20231224153816.1664687-5-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/gadget/function/f_uvc.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index da5f28e471b0..929666805bd2 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -721,13 +721,29 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f) } uvc->enable_interrupt_ep = opts->enable_interrupt_ep; - ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep); + /* + * gadget_is_{super|dual}speed() API check UDC controller capitblity. It should pass down + * highest speed endpoint descriptor to UDC controller. So UDC controller driver can reserve + * enough resource at check_config(), especially mult and maxburst. So UDC driver (such as + * cdns3) can know need at least (mult + 1) * (maxburst + 1) * wMaxPacketSize internal + * memory for this uvc functions. This is the only straightforward method to resolve the UDC + * resource allocation issue in the current gadget framework. + */ + if (gadget_is_superspeed(c->cdev->gadget)) + ep = usb_ep_autoconfig_ss(cdev->gadget, &uvc_ss_streaming_ep, + &uvc_ss_streaming_comp); + else if (gadget_is_dualspeed(cdev->gadget)) + ep = usb_ep_autoconfig(cdev->gadget, &uvc_hs_streaming_ep); + else + ep = usb_ep_autoconfig(cdev->gadget, &uvc_fs_streaming_ep); + if (!ep) { uvcg_info(f, "Unable to allocate streaming EP\n"); goto error; } uvc->video.ep = ep; + uvc_fs_streaming_ep.bEndpointAddress = uvc->video.ep->address; uvc_hs_streaming_ep.bEndpointAddress = uvc->video.ep->address; uvc_ss_streaming_ep.bEndpointAddress = uvc->video.ep->address; -- 2.43.0

1 year, 4 months

1
0
0 0

patch "usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabled" added to usb-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabled to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 40c304109e866a7dc123661a5c8ca72f6b5e14e0 Mon Sep 17 00:00:00 2001 From: Frank Li <Frank.Li(a)nxp.com> Date: Sun, 24 Dec 2023 10:38:15 -0500 Subject: usb: cdns3: Fix uvc fail when DMA cross 4k boundery since sg enabled Supposed DMA cross 4k bounder problem should be fixed at DEV_VER_V2, but still met problem when do ISO transfer if sg enabled. Data pattern likes below when sg enabled, package size is 1k and mult is 2 [UVC Header(8B) ] [data(3k - 8)] ... The received data at offset 0xd000 will get 0xc000 data, len 0x70. Error happen position as below pattern: 0xd000: wrong 0xe000: wrong 0xf000: correct 0x10000: wrong 0x11000: wrong 0x12000: correct ... To avoid DMA cross 4k bounder at ISO transfer, reduce burst len according to start DMA address's alignment. Cc: <stable(a)vger.kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li(a)nxp.com> Link: https://lore.kernel.org/r/20231224153816.1664687-4-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/cdns3/cdns3-gadget.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index 4c6893af22dd..aeca902ab6cc 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -1120,6 +1120,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, u32 togle_pcs = 1; int sg_iter = 0; int num_trb_req; + int trb_burst; int num_trb; int address; u32 control; @@ -1243,7 +1244,36 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, total_tdl += DIV_ROUND_UP(length, priv_ep->endpoint.maxpacket); - trb->length |= cpu_to_le32(TRB_BURST_LEN(priv_ep->trb_burst_size) | + trb_burst = priv_ep->trb_burst_size; + + /* + * Supposed DMA cross 4k bounder problem should be fixed at DEV_VER_V2, but still + * met problem when do ISO transfer if sg enabled. + * + * Data pattern likes below when sg enabled, package size is 1k and mult is 2 + * [UVC Header(8B) ] [data(3k - 8)] ... + * + * The received data at offset 0xd000 will get 0xc000 data, len 0x70. Error happen + * as below pattern: + * 0xd000: wrong + * 0xe000: wrong + * 0xf000: correct + * 0x10000: wrong + * 0x11000: wrong + * 0x12000: correct + * ... + * + * But it is still unclear about why error have not happen below 0xd000, it should + * cross 4k bounder. But anyway, the below code can fix this problem. + * + * To avoid DMA cross 4k bounder at ISO transfer, reduce burst len according to 16. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && priv_dev->dev_ver <= DEV_VER_V2) + if (ALIGN_DOWN(trb->buffer, SZ_4K) != + ALIGN_DOWN(trb->buffer + length, SZ_4K)) + trb_burst = 16; + + trb->length |= cpu_to_le32(TRB_BURST_LEN(trb_burst) | TRB_LEN(length)); pcs = priv_ep->pcs ? TRB_CYCLE : 0; -- 2.43.0

1 year, 4 months

1
0
0 0

patch "usb: cdns3: fix iso transfer error when mult is not zero" added to usb-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: cdns3: fix iso transfer error when mult is not zero to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 92f02efa1d86d7dcaef7f38a5fe3396c4e88a93c Mon Sep 17 00:00:00 2001 From: Frank Li <Frank.Li(a)nxp.com> Date: Sun, 24 Dec 2023 10:38:14 -0500 Subject: usb: cdns3: fix iso transfer error when mult is not zero ISO basic transfer is ITP(SOF) Package_0 Package_1 ... Package_n CDNS3 DMA start dma transfer from memmory to internal FIFO when get SOF, controller will transfer data to usb bus from internal FIFO when get IN token. According USB spec defination: Maximum number of packets = (bMaxBurst + 1) * (Mult + 1) Internal memory should be the same as (bMaxBurst + 1) * (Mult + 1). DMA don't fetch data advance when ISO transfer, so only reserve (bMaxBurst + 1) * (Mult + 1) internal memory for ISO transfer. Need save Mult and bMaxBurst information and set it into EP_CFG register, otherwise only 1 package is sent by controller, other package will be lost. Cc: <stable(a)vger.kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li(a)nxp.com> Link: https://lore.kernel.org/r/20231224153816.1664687-3-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/cdns3/cdns3-gadget.c | 59 +++++++++++++++++++------------- drivers/usb/cdns3/cdns3-gadget.h | 3 ++ 2 files changed, 39 insertions(+), 23 deletions(-) diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index 22a31ffa6942..4c6893af22dd 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -2065,11 +2065,10 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC); struct cdns3_device *priv_dev = priv_ep->cdns3_dev; u32 bEndpointAddress = priv_ep->num | priv_ep->dir; - u32 max_packet_size = 0; - u8 maxburst = 0; + u32 max_packet_size = priv_ep->wMaxPacketSize; + u8 maxburst = priv_ep->bMaxBurst; u32 ep_cfg = 0; u8 buffering; - u8 mult = 0; int ret; buffering = priv_dev->ep_buf_size - 1; @@ -2091,8 +2090,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) break; default: ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC); - mult = priv_dev->ep_iso_burst - 1; - buffering = mult + 1; + buffering = (priv_ep->bMaxBurst + 1) * (priv_ep->mult + 1) - 1; } switch (priv_dev->gadget.speed) { @@ -2103,17 +2101,8 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) max_packet_size = is_iso_ep ? 1024 : 512; break; case USB_SPEED_SUPER: - /* It's limitation that driver assumes in driver. */ - mult = 0; - max_packet_size = 1024; - if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) { - maxburst = priv_dev->ep_iso_burst - 1; - buffering = (mult + 1) * - (maxburst + 1); - - if (priv_ep->interval > 1) - buffering++; - } else { + if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) { + max_packet_size = 1024; maxburst = priv_dev->ep_buf_size - 1; } break; @@ -2142,7 +2131,6 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) if (priv_dev->dev_ver < DEV_VER_V2) priv_ep->trb_burst_size = 16; - mult = min_t(u8, mult, EP_CFG_MULT_MAX); buffering = min_t(u8, buffering, EP_CFG_BUFFERING_MAX); maxburst = min_t(u8, maxburst, EP_CFG_MAXBURST_MAX); @@ -2176,7 +2164,7 @@ int cdns3_ep_config(struct cdns3_endpoint *priv_ep, bool enable) } ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) | - EP_CFG_MULT(mult) | + EP_CFG_MULT(priv_ep->mult) | /* must match EP setting */ EP_CFG_BUFFERING(buffering) | EP_CFG_MAXBURST(maxburst); @@ -2266,6 +2254,13 @@ usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget, priv_ep->type = usb_endpoint_type(desc); priv_ep->flags |= EP_CLAIMED; priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0; + priv_ep->wMaxPacketSize = usb_endpoint_maxp(desc); + priv_ep->mult = USB_EP_MAXP_MULT(priv_ep->wMaxPacketSize); + priv_ep->wMaxPacketSize &= USB_ENDPOINT_MAXP_MASK; + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && comp_desc) { + priv_ep->mult = USB_SS_MULT(comp_desc->bmAttributes) - 1; + priv_ep->bMaxBurst = comp_desc->bMaxBurst; + } spin_unlock_irqrestore(&priv_dev->lock, flags); return &priv_ep->endpoint; @@ -3049,22 +3044,40 @@ static int cdns3_gadget_check_config(struct usb_gadget *gadget) struct cdns3_endpoint *priv_ep; struct usb_ep *ep; int n_in = 0; + int iso = 0; + int out = 1; int total; + int n; list_for_each_entry(ep, &gadget->ep_list, ep_list) { priv_ep = ep_to_cdns3_ep(ep); - if ((priv_ep->flags & EP_CLAIMED) && (ep->address & USB_DIR_IN)) - n_in++; + if (!(priv_ep->flags & EP_CLAIMED)) + continue; + + n = (priv_ep->mult + 1) * (priv_ep->bMaxBurst + 1); + if (ep->address & USB_DIR_IN) { + /* + * ISO transfer: DMA start move data when get ISO, only transfer + * data as min(TD size, iso). No benefit for allocate bigger + * internal memory than 'iso'. + */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) + iso += n; + else + n_in++; + } else { + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) + out = max_t(int, out, n); + } } /* 2KB are reserved for EP0, 1KB for out*/ - total = 2 + n_in + 1; + total = 2 + n_in + out + iso; if (total > priv_dev->onchip_buffers) return -ENOMEM; - priv_dev->ep_buf_size = priv_dev->ep_iso_burst = - (priv_dev->onchip_buffers - 2) / (n_in + 1); + priv_dev->ep_buf_size = (priv_dev->onchip_buffers - 2 - iso) / (n_in + out); return 0; } diff --git a/drivers/usb/cdns3/cdns3-gadget.h b/drivers/usb/cdns3/cdns3-gadget.h index fbe4a8e3aa89..086a7bb83897 100644 --- a/drivers/usb/cdns3/cdns3-gadget.h +++ b/drivers/usb/cdns3/cdns3-gadget.h @@ -1168,6 +1168,9 @@ struct cdns3_endpoint { u8 dir; u8 num; u8 type; + u8 mult; + u8 bMaxBurst; + u16 wMaxPacketSize; int interval; int free_trbs; -- 2.43.0

1 year, 4 months

1
0
0 0

patch "usb: cdns3: fix uvc failure work since sg support enabled" added to usb-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: cdns3: fix uvc failure work since sg support enabled to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 1b8be5ecff26201bafb0a554c74e91571299fb94 Mon Sep 17 00:00:00 2001 From: Frank Li <Frank.Li(a)nxp.com> Date: Sun, 24 Dec 2023 10:38:13 -0500 Subject: usb: cdns3: fix uvc failure work since sg support enabled When IP version >= DEV_VER_V2, gadget:sg_supported is true. So uvc gadget function driver will use sg to equeue data, first is 8bytes header, the second is 1016bytes data. cdns3_prepare_trb: ep2in: trb 0000000000ac755f, dma buf: 0xbf455000, size: 8, burst: 128 ctrl: 0x00000415 (C=1, T=0, ISP, CHAIN, Normal) cdns3_prepare_trb: ep2in: trb 00000000a574e693, dma buf: 0xc0200fe0, size: 1016, burst: 128 ctrl: 0x00000405 (C=1, T=0, ISP, Normal) But cdns3_ep_run_transfer() can't correctly handle this case, which only support one TRB for ISO transfer. The controller requires duplicate the TD for each SOF if priv_ep->interval is not 1. DMA will read data from DDR to internal FIFO when get SOF. Send data to bus when receive IN token. DMA always refill FIFO when get SOF regardless host send IN token or not. If host send IN token later, some frames data will be lost. Fixed it by below major steps: 1. Calculate numembers of TRB base on sg_nums and priv_ep->interval. 2. Remove CHAIN flags for each end TRB of TD when duplicate TD. 3. The controller requires LINK TRB must be first TRB of TD. When check there are not enough TRBs lefts, just fill LINK TRB for left TRBs. .... CHAIN_TRB DATA_TRB, CHAIN_TRB DATA_TRB, LINK_TRB ... LINK_TRB ^End of TRB List Cc: <stable(a)vger.kernel.org> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li(a)nxp.com> Link: https://lore.kernel.org/r/20231224153816.1664687-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/cdns3/cdns3-gadget.c | 53 ++++++++++++++++++++++++-------- 1 file changed, 41 insertions(+), 12 deletions(-) diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index 15463b7cddd2..22a31ffa6942 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -1119,6 +1119,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, dma_addr_t trb_dma; u32 togle_pcs = 1; int sg_iter = 0; + int num_trb_req; int num_trb; int address; u32 control; @@ -1128,15 +1129,13 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, bool sg_supported = !!(request->num_mapped_sgs); u32 ioc = request->no_interrupt ? 0 : TRB_IOC; - if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) - num_trb = priv_ep->interval; - else - num_trb = sg_supported ? request->num_mapped_sgs : 1; + num_trb_req = sg_supported ? request->num_mapped_sgs : 1; - if (num_trb > priv_ep->free_trbs) { - priv_ep->flags |= EP_RING_FULL; - return -ENOBUFS; - } + /* ISO transfer require each SOF have a TD, each TD include some TRBs */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) + num_trb = priv_ep->interval * num_trb_req; + else + num_trb = num_trb_req; priv_req = to_cdns3_request(request); address = priv_ep->endpoint.desc->bEndpointAddress; @@ -1185,14 +1184,31 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, link_trb->control = cpu_to_le32(((priv_ep->pcs) ? TRB_CYCLE : 0) | TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit); + + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) { + /* + * ISO require LINK TRB must be first one of TD. + * Fill LINK TRBs for left trb space to simply software process logic. + */ + while (priv_ep->enqueue) { + *trb = *link_trb; + trace_cdns3_prepare_trb(priv_ep, trb); + + cdns3_ep_inc_enq(priv_ep); + trb = priv_ep->trb_pool + priv_ep->enqueue; + priv_req->trb = trb; + } + } + } + + if (num_trb > priv_ep->free_trbs) { + priv_ep->flags |= EP_RING_FULL; + return -ENOBUFS; } if (priv_dev->dev_ver <= DEV_VER_V2) togle_pcs = cdns3_wa1_update_guard(priv_ep, trb); - if (sg_supported) - s = request->sg; - /* set incorrect Cycle Bit for first trb*/ control = priv_ep->pcs ? 0 : TRB_CYCLE; trb->length = 0; @@ -1210,6 +1226,9 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, do { u32 length; + if (!(sg_iter % num_trb_req) && sg_supported) + s = request->sg; + /* fill TRB */ control |= TRB_TYPE(TRB_NORMAL); if (sg_supported) { @@ -1251,7 +1270,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep, if (sg_supported) { trb->control |= cpu_to_le32(TRB_ISP); /* Don't set chain bit for last TRB */ - if (sg_iter < num_trb - 1) + if ((sg_iter % num_trb_req) < num_trb_req - 1) trb->control |= cpu_to_le32(TRB_CHAIN); s = sg_next(s); @@ -1509,6 +1528,12 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev, /* The TRB was changed as link TRB, and the request was handled at ep_dequeue */ while (TRB_FIELD_TO_TYPE(le32_to_cpu(trb->control)) == TRB_LINK) { + + /* ISO ep_traddr may stop at LINK TRB */ + if (priv_ep->dequeue == cdns3_get_dma_pos(priv_dev, priv_ep) && + priv_ep->type == USB_ENDPOINT_XFER_ISOC) + break; + trace_cdns3_complete_trb(priv_ep, trb); cdns3_ep_inc_deq(priv_ep); trb = priv_ep->trb_pool + priv_ep->dequeue; @@ -1541,6 +1566,10 @@ static void cdns3_transfer_completed(struct cdns3_device *priv_dev, } if (request_handled) { + /* TRBs are duplicated by priv_ep->interval time for ISO IN */ + if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && priv_ep->dir) + request->actual /= priv_ep->interval; + cdns3_gadget_giveback(priv_ep, priv_req, 0); request_handled = false; transfer_end = false; -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From d5078509c8b06c5c472a60232815e41af81c6446 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:12 -0500 Subject: serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() Simplify and improve readability by replacing while(1) loop with do {} while, and by using the keep_polling variable as the exit condition, making it more explicit. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable(a)vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sc16is7xx.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 44a11c89c949..8d257208cbf3 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -783,17 +783,18 @@ static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) static irqreturn_t sc16is7xx_irq(int irq, void *dev_id) { + bool keep_polling; + struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id; - while (1) { - bool keep_polling = false; + do { int i; + keep_polling = false; + for (i = 0; i < s->devtype->nr_uart; ++i) keep_polling |= sc16is7xx_port_irq(s, i); - if (!keep_polling) - break; - } + } while (keep_polling); return IRQ_HANDLED; } -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From ed647256e8f226241ecff7baaecdb8632ffc7ec1 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:11 -0500 Subject: serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed sc16is7xx_port_irq() from looping multiple times when there was still interrupts to serve. It simply changed the do {} while(1) loop to a do {} while(0) loop, which makes the loop itself now obsolete. Clean the code by removing this obsolete do {} while(0) loop. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable(a)vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sc16is7xx.c | 81 ++++++++++++++++------------------ 1 file changed, 39 insertions(+), 42 deletions(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index ced2446909a2..44a11c89c949 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -725,58 +725,55 @@ static void sc16is7xx_update_mlines(struct sc16is7xx_one *one) static bool sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) { bool rc = true; + unsigned int iir, rxlen; struct uart_port *port = &s->p[portno].port; struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); mutex_lock(&one->efr_lock); - do { - unsigned int iir, rxlen; + iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); + if (iir & SC16IS7XX_IIR_NO_INT_BIT) { + rc = false; + goto out_port_irq; + } - iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG); - if (iir & SC16IS7XX_IIR_NO_INT_BIT) { - rc = false; - goto out_port_irq; - } + iir &= SC16IS7XX_IIR_ID_MASK; - iir &= SC16IS7XX_IIR_ID_MASK; + switch (iir) { + case SC16IS7XX_IIR_RDI_SRC: + case SC16IS7XX_IIR_RLSE_SRC: + case SC16IS7XX_IIR_RTOI_SRC: + case SC16IS7XX_IIR_XOFFI_SRC: + rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); - switch (iir) { - case SC16IS7XX_IIR_RDI_SRC: - case SC16IS7XX_IIR_RLSE_SRC: - case SC16IS7XX_IIR_RTOI_SRC: - case SC16IS7XX_IIR_XOFFI_SRC: - rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG); + /* + * There is a silicon bug that makes the chip report a + * time-out interrupt but no data in the FIFO. This is + * described in errata section 18.1.4. + * + * When this happens, read one byte from the FIFO to + * clear the interrupt. + */ + if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) + rxlen = 1; - /* - * There is a silicon bug that makes the chip report a - * time-out interrupt but no data in the FIFO. This is - * described in errata section 18.1.4. - * - * When this happens, read one byte from the FIFO to - * clear the interrupt. - */ - if (iir == SC16IS7XX_IIR_RTOI_SRC && !rxlen) - rxlen = 1; - - if (rxlen) - sc16is7xx_handle_rx(port, rxlen, iir); - break; + if (rxlen) + sc16is7xx_handle_rx(port, rxlen, iir); + break; /* CTSRTS interrupt comes only when CTS goes inactive */ - case SC16IS7XX_IIR_CTSRTS_SRC: - case SC16IS7XX_IIR_MSI_SRC: - sc16is7xx_update_mlines(one); - break; - case SC16IS7XX_IIR_THRI_SRC: - sc16is7xx_handle_tx(port); - break; - default: - dev_err_ratelimited(port->dev, - "ttySC%i: Unexpected interrupt: %x", - port->line, iir); - break; - } - } while (0); + case SC16IS7XX_IIR_CTSRTS_SRC: + case SC16IS7XX_IIR_MSI_SRC: + sc16is7xx_update_mlines(one); + break; + case SC16IS7XX_IIR_THRI_SRC: + sc16is7xx_handle_tx(port); + break; + default: + dev_err_ratelimited(port->dev, + "ttySC%i: Unexpected interrupt: %x", + port->line, iir); + break; + } out_port_irq: mutex_unlock(&one->efr_lock); -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: sc16is7xx: set safe default SPI clock frequency" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sc16is7xx: set safe default SPI clock frequency to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 3ef79cd1412236d884ab0c46b4d1921380807b48 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:10 -0500 Subject: serial: sc16is7xx: set safe default SPI clock frequency 15 MHz is supported only by 76x variants. If the SPI clock frequency is not specified, use a safe default clock value of 4 MHz that is supported by all variants. Also use HZ_PER_MHZ macro to improve readability. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: <stable(a)vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sc16is7xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 798fa115b28a..ced2446909a2 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -24,6 +24,7 @@ #include <linux/tty_flip.h> #include <linux/spi/spi.h> #include <linux/uaccess.h> +#include <linux/units.h> #include <uapi/linux/sched/types.h> #define SC16IS7XX_NAME "sc16is7xx" @@ -1738,7 +1739,7 @@ static int sc16is7xx_spi_probe(struct spi_device *spi) return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n"); spi->mode = spi->mode ? : SPI_MODE_0; - spi->max_speed_hz = spi->max_speed_hz ? : 15000000; + spi->max_speed_hz = spi->max_speed_hz ? : 4 * HZ_PER_MHZ; ret = spi_setup(spi); if (ret) return ret; -- 2.43.0

1 year, 4 months

1
0
0 0

patch "serial: sc16is7xx: add check for unsupported SPI modes during probe" added to tty-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sc16is7xx: add check for unsupported SPI modes during probe to my tty git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git in the tty-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. From 6d710b769c1f5f0d55c9ad9bb49b7dce009ec103 Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Date: Thu, 21 Dec 2023 18:18:09 -0500 Subject: serial: sc16is7xx: add check for unsupported SPI modes during probe The original comment is confusing because it implies that variants other than the SC16IS762 supports other SPI modes beside SPI_MODE_0. Extract from datasheet: The SC16IS762 differs from the SC16IS752 in that it supports SPI clock speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS752... In all other aspects, the SC16IS762 is functionally and electrically the same as the SC16IS752. The same is also true of the SC16IS760 variant versus the SC16IS740 and SC16IS750 variants. For all variants, only SPI mode 0 is supported. Change comment and abort probing if the specified SPI mode is not SPI_MODE_0. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: <stable(a)vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve(a)dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/serial/sc16is7xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 17b90f971f96..798fa115b28a 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1733,7 +1733,10 @@ static int sc16is7xx_spi_probe(struct spi_device *spi) /* Setup SPI bus */ spi->bits_per_word = 8; - /* only supports mode 0 on SC16IS762 */ + /* For all variants, only mode 0 is supported */ + if ((spi->mode & SPI_MODE_X_MASK) != SPI_MODE_0) + return dev_err_probe(&spi->dev, -EINVAL, "Unsupported SPI mode\n"); + spi->mode = spi->mode ? : SPI_MODE_0; spi->max_speed_hz = spi->max_speed_hz ? : 15000000; ret = spi_setup(spi); -- 2.43.0

1 year, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2024