The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x ff8897b5189495b47895ca247b860a29dc04b36b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023062254-neglector-upbeat-10ca@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ff8897b5189495b47895ca247b860a29dc04b36b Mon Sep 17 00:00:00 2001
From: Matthieu Baerts <matthieu.baerts(a)tessares.net>
Date: Sat, 10 Jun 2023 18:11:48 +0200
Subject: [PATCH] selftests: mptcp: join: skip fail tests if not supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the MP_FAIL / infinite mapping introduced
by commit 1e39e5a32ad7 ("mptcp: infinite mapping sending") and the
following ones.
It is possible to look for one of the infinite mapping counters to know
in advance if the this feature is available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b6e074e171bc ("selftests: mptcp: add infinite map testcase")
Cc: stable(a)vger.kernel.org
Fixes: 2ba18161d407 ("selftests: mptcp: add MP_FAIL reset testcase")
Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net>
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index f9161ed69b86..7867bad59253 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -384,7 +384,7 @@ setup_fail_rules()
reset_with_fail()
{
- reset "${1}" || return 1
+ reset_check_counter "${1}" "MPTcpExtInfiniteMapTx" || return 1
shift
ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x f2b492b04a167261e1c38eb76f78fb4294473a49
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023062235-census-ramp-a602@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From f2b492b04a167261e1c38eb76f78fb4294473a49 Mon Sep 17 00:00:00 2001
From: Matthieu Baerts <matthieu.baerts(a)tessares.net>
Date: Sat, 10 Jun 2023 18:11:47 +0200
Subject: [PATCH] selftests: mptcp: join: skip userspace PM tests if not
supported
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the userspace PM introduced by commit
4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs")
and the following ones.
It is possible to look for the MPTCP pm_type's sysctl knob to know in
advance if the userspace PM is available.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5ac1d2d63451 ("selftests: mptcp: Add tests for userspace PM type")
Cc: stable(a)vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net>
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index f8e58ebcdd54..f9161ed69b86 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -84,7 +84,7 @@ init_partial()
ip netns add $netns || exit $ksft_skip
ip -net $netns link set lo up
ip netns exec $netns sysctl -q net.mptcp.enabled=1
- ip netns exec $netns sysctl -q net.mptcp.pm_type=0
+ ip netns exec $netns sysctl -q net.mptcp.pm_type=0 2>/dev/null || true
ip netns exec $netns sysctl -q net.ipv4.conf.all.rp_filter=0
ip netns exec $netns sysctl -q net.ipv4.conf.default.rp_filter=0
if [ $checksum -eq 1 ]; then
@@ -3191,7 +3191,8 @@ fail_tests()
userspace_tests()
{
# userspace pm type prevents add_addr
- if reset "userspace pm type prevents add_addr"; then
+ if reset "userspace pm type prevents add_addr" &&
+ continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns1
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
@@ -3202,7 +3203,8 @@ userspace_tests()
fi
# userspace pm type does not echo add_addr without daemon
- if reset "userspace pm no echo w/o daemon"; then
+ if reset "userspace pm no echo w/o daemon" &&
+ continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns2
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
@@ -3213,7 +3215,8 @@ userspace_tests()
fi
# userspace pm type rejects join
- if reset "userspace pm type rejects join"; then
+ if reset "userspace pm type rejects join" &&
+ continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns1
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
@@ -3223,7 +3226,8 @@ userspace_tests()
fi
# userspace pm type does not send join
- if reset "userspace pm type does not send join"; then
+ if reset "userspace pm type does not send join" &&
+ continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns2
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
@@ -3233,7 +3237,8 @@ userspace_tests()
fi
# userspace pm type prevents mp_prio
- if reset "userspace pm type prevents mp_prio"; then
+ if reset "userspace pm type prevents mp_prio" &&
+ continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns1
pm_nl_set_limits $ns1 1 1
pm_nl_set_limits $ns2 1 1
@@ -3244,7 +3249,8 @@ userspace_tests()
fi
# userspace pm type prevents rm_addr
- if reset "userspace pm type prevents rm_addr"; then
+ if reset "userspace pm type prevents rm_addr" &&
+ continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns1
set_userspace_pm $ns2
pm_nl_set_limits $ns1 0 1
@@ -3256,7 +3262,8 @@ userspace_tests()
fi
# userspace pm add & remove address
- if reset_with_events "userspace pm add & remove address"; then
+ if reset_with_events "userspace pm add & remove address" &&
+ continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns1
pm_nl_set_limits $ns2 1 1
run_tests $ns1 $ns2 10.0.1.1 0 userspace_1 0 slow
@@ -3267,7 +3274,8 @@ userspace_tests()
fi
# userspace pm create destroy subflow
- if reset_with_events "userspace pm create destroy subflow"; then
+ if reset_with_events "userspace pm create destroy subflow" &&
+ continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
set_userspace_pm $ns2
pm_nl_set_limits $ns1 0 1
run_tests $ns1 $ns2 10.0.1.1 0 0 userspace_1 slow
The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 4a0b866a3f7d3c22033f40e93e94befc6fe51bce
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023062218-dude-unshaven-b4cb@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 4a0b866a3f7d3c22033f40e93e94befc6fe51bce Mon Sep 17 00:00:00 2001
From: Matthieu Baerts <matthieu.baerts(a)tessares.net>
Date: Sat, 10 Jun 2023 18:11:40 +0200
Subject: [PATCH] selftests: mptcp: join: skip test if iptables/tc cmds fail
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Some tests are using IPTables and/or TC commands to force some
behaviours. If one of these commands fails -- likely because some
features are not available due to missing kernel config -- we should
intercept the error and skip the tests requiring these features.
Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.
This patch also replaces the 'exit 1' by 'return 1' not to stop the
selftest in the middle without the conclusion if there is an issue with
NF or TC.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 8d014eaa9254 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable(a)vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net>
Signed-off-by: Jakub Kicinski <kuba(a)kernel.org>
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 276396cbe60c..c471934ad5e0 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -286,11 +286,15 @@ reset_with_add_addr_timeout()
fi
ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
- ip netns exec $ns2 $tables -A OUTPUT -p tcp \
- -m tcp --tcp-option 30 \
- -m bpf --bytecode \
- "$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \
- -j DROP
+
+ if ! ip netns exec $ns2 $tables -A OUTPUT -p tcp \
+ -m tcp --tcp-option 30 \
+ -m bpf --bytecode \
+ "$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \
+ -j DROP; then
+ mark_as_skipped "unable to set the 'add addr' rule"
+ return 1
+ fi
}
# $1: test name
@@ -334,17 +338,12 @@ reset_with_allow_join_id0()
# tc action pedit offset 162 out of bounds
#
# Netfilter is used to mark packets with enough data.
-reset_with_fail()
+setup_fail_rules()
{
- reset "${1}" || return 1
-
- ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1
- ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1
-
check_invert=1
validate_checksum=1
- local i="$2"
- local ip="${3:-4}"
+ local i="$1"
+ local ip="${2:-4}"
local tables
tables="${iptables}"
@@ -359,15 +358,32 @@ reset_with_fail()
-p tcp \
-m length --length 150:9999 \
-m statistic --mode nth --packet 1 --every 99999 \
- -j MARK --set-mark 42 || exit 1
+ -j MARK --set-mark 42 || return ${ksft_skip}
- tc -n $ns2 qdisc add dev ns2eth$i clsact || exit 1
+ tc -n $ns2 qdisc add dev ns2eth$i clsact || return ${ksft_skip}
tc -n $ns2 filter add dev ns2eth$i egress \
protocol ip prio 1000 \
handle 42 fw \
action pedit munge offset 148 u8 invert \
pipe csum tcp \
- index 100 || exit 1
+ index 100 || return ${ksft_skip}
+}
+
+reset_with_fail()
+{
+ reset "${1}" || return 1
+ shift
+
+ ip netns exec $ns1 sysctl -q net.mptcp.checksum_enabled=1
+ ip netns exec $ns2 sysctl -q net.mptcp.checksum_enabled=1
+
+ local rc=0
+ setup_fail_rules "${@}" || rc=$?
+
+ if [ ${rc} -eq ${ksft_skip} ]; then
+ mark_as_skipped "unable to set the 'fail' rules"
+ return 1
+ fi
}
reset_with_events()
@@ -382,6 +398,25 @@ reset_with_events()
evts_ns2_pid=$!
}
+reset_with_tcp_filter()
+{
+ reset "${1}" || return 1
+ shift
+
+ local ns="${!1}"
+ local src="${2}"
+ local target="${3}"
+
+ if ! ip netns exec "${ns}" ${iptables} \
+ -A INPUT \
+ -s "${src}" \
+ -p tcp \
+ -j "${target}"; then
+ mark_as_skipped "unable to set the filter rules"
+ return 1
+ fi
+}
+
fail_test()
{
ret=1
@@ -745,15 +780,6 @@ pm_nl_check_endpoint()
fi
}
-filter_tcp_from()
-{
- local ns="${1}"
- local src="${2}"
- local target="${3}"
-
- ip netns exec "${ns}" ${iptables} -A INPUT -s "${src}" -p tcp -j "${target}"
-}
-
do_transfer()
{
local listener_ns="$1"
@@ -1975,23 +2001,23 @@ subflows_error_tests()
fi
# multiple subflows, with subflow creation error
- if reset "multi subflows, with failing subflow"; then
+ if reset_with_tcp_filter "multi subflows, with failing subflow" ns1 10.0.3.2 REJECT &&
+ continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
- filter_tcp_from $ns1 10.0.3.2 REJECT
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr 1 1 1
fi
# multiple subflows, with subflow timeout on MPJ
- if reset "multi subflows, with subflow timeout"; then
+ if reset_with_tcp_filter "multi subflows, with subflow timeout" ns1 10.0.3.2 DROP &&
+ continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
pm_nl_set_limits $ns1 0 2
pm_nl_set_limits $ns2 0 2
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
- filter_tcp_from $ns1 10.0.3.2 DROP
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr 1 1 1
fi
@@ -1999,11 +2025,11 @@ subflows_error_tests()
# multiple subflows, check that the endpoint corresponding to
# closed subflow (due to reset) is not reused if additional
# subflows are added later
- if reset "multi subflows, fair usage on close"; then
+ if reset_with_tcp_filter "multi subflows, fair usage on close" ns1 10.0.3.2 REJECT &&
+ continue_if mptcp_lib_kallsyms_has "mptcp_pm_subflow_check_next$"; then
pm_nl_set_limits $ns1 0 1
pm_nl_set_limits $ns2 0 1
pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
- filter_tcp_from $ns1 10.0.3.2 REJECT
run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow &
# mpj subflow will be in TW after the reset
commit eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")
...was added on the observation of CXL memory not being accessible after
setting up a region on a "cold-plugged" device. A "cold-plugged" CXL
device is one that was not present at boot, so platform-firmware/BIOS
has no chance to set it up.
While it is true that the debug found the enable bit clear in the
host-bridge's instance of the global control register (CXL 3.0
8.2.4.19.2 CXL HDM Decoder Global Control Register), that bit is
described as:
"This bit is only applicable to CXL.mem devices and shall
return 0 on CXL Host Bridges and Upstream Switch Ports."
So it is meant to be zero, and further testing confirmed that this "fix"
had no effect on the failure. Revert it, and be more vigilant about
proposed fixes in the future. Since the original copied stable@, flag
this revert for stable@ as well.
Cc: <stable(a)vger.kernel.org>
Fixes: eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")
Signed-off-by: Dan Williams <dan.j.williams(a)intel.com>
---
drivers/cxl/core/pci.c | 27 ++++-----------------------
drivers/cxl/cxl.h | 1 -
drivers/cxl/port.c | 14 +++++---------
tools/testing/cxl/Kbuild | 1 -
tools/testing/cxl/test/mock.c | 15 ---------------
5 files changed, 9 insertions(+), 49 deletions(-)
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 7440f84be6c8..552203c13b39 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -308,36 +308,17 @@ static void disable_hdm(void *_cxlhdm)
hdm + CXL_HDM_DECODER_CTRL_OFFSET);
}
-int devm_cxl_enable_hdm(struct cxl_port *port, struct cxl_hdm *cxlhdm)
+static int devm_cxl_enable_hdm(struct device *host, struct cxl_hdm *cxlhdm)
{
- void __iomem *hdm;
+ void __iomem *hdm = cxlhdm->regs.hdm_decoder;
u32 global_ctrl;
- /*
- * If the hdm capability was not mapped there is nothing to enable and
- * the caller is responsible for what happens next. For example,
- * emulate a passthrough decoder.
- */
- if (IS_ERR(cxlhdm))
- return 0;
-
- hdm = cxlhdm->regs.hdm_decoder;
global_ctrl = readl(hdm + CXL_HDM_DECODER_CTRL_OFFSET);
-
- /*
- * If the HDM decoder capability was enabled on entry, skip
- * registering disable_hdm() since this decode capability may be
- * owned by platform firmware.
- */
- if (global_ctrl & CXL_HDM_DECODER_ENABLE)
- return 0;
-
writel(global_ctrl | CXL_HDM_DECODER_ENABLE,
hdm + CXL_HDM_DECODER_CTRL_OFFSET);
- return devm_add_action_or_reset(&port->dev, disable_hdm, cxlhdm);
+ return devm_add_action_or_reset(host, disable_hdm, cxlhdm);
}
-EXPORT_SYMBOL_NS_GPL(devm_cxl_enable_hdm, CXL);
int cxl_dvsec_rr_decode(struct device *dev, int d,
struct cxl_endpoint_dvsec_info *info)
@@ -511,7 +492,7 @@ int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm,
if (info->mem_enabled)
return 0;
- rc = devm_cxl_enable_hdm(port, cxlhdm);
+ rc = devm_cxl_enable_hdm(&port->dev, cxlhdm);
if (rc)
return rc;
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 74548f8f5f4c..d743df66a582 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -717,7 +717,6 @@ struct cxl_endpoint_dvsec_info {
struct cxl_hdm;
struct cxl_hdm *devm_cxl_setup_hdm(struct cxl_port *port,
struct cxl_endpoint_dvsec_info *info);
-int devm_cxl_enable_hdm(struct cxl_port *port, struct cxl_hdm *cxlhdm);
int devm_cxl_enumerate_decoders(struct cxl_hdm *cxlhdm,
struct cxl_endpoint_dvsec_info *info);
int devm_cxl_add_passthrough_decoder(struct cxl_port *port);
diff --git a/drivers/cxl/port.c b/drivers/cxl/port.c
index 5ffe3c7d2f5e..43718d0396d7 100644
--- a/drivers/cxl/port.c
+++ b/drivers/cxl/port.c
@@ -60,17 +60,13 @@ static int discover_region(struct device *dev, void *root)
static int cxl_switch_port_probe(struct cxl_port *port)
{
struct cxl_hdm *cxlhdm;
- int rc, nr_dports;
-
- nr_dports = devm_cxl_port_enumerate_dports(port);
- if (nr_dports < 0)
- return nr_dports;
+ int rc;
- cxlhdm = devm_cxl_setup_hdm(port, NULL);
- rc = devm_cxl_enable_hdm(port, cxlhdm);
- if (rc)
+ rc = devm_cxl_port_enumerate_dports(port);
+ if (rc < 0)
return rc;
+ cxlhdm = devm_cxl_setup_hdm(port, NULL);
if (!IS_ERR(cxlhdm))
return devm_cxl_enumerate_decoders(cxlhdm, NULL);
@@ -79,7 +75,7 @@ static int cxl_switch_port_probe(struct cxl_port *port)
return PTR_ERR(cxlhdm);
}
- if (nr_dports == 1) {
+ if (rc == 1) {
dev_dbg(&port->dev, "Fallback to passthrough decoder\n");
return devm_cxl_add_passthrough_decoder(port);
}
diff --git a/tools/testing/cxl/Kbuild b/tools/testing/cxl/Kbuild
index 6f9347ade82c..fba7bec96acd 100644
--- a/tools/testing/cxl/Kbuild
+++ b/tools/testing/cxl/Kbuild
@@ -6,7 +6,6 @@ ldflags-y += --wrap=acpi_pci_find_root
ldflags-y += --wrap=nvdimm_bus_register
ldflags-y += --wrap=devm_cxl_port_enumerate_dports
ldflags-y += --wrap=devm_cxl_setup_hdm
-ldflags-y += --wrap=devm_cxl_enable_hdm
ldflags-y += --wrap=devm_cxl_add_passthrough_decoder
ldflags-y += --wrap=devm_cxl_enumerate_decoders
ldflags-y += --wrap=cxl_await_media_ready
diff --git a/tools/testing/cxl/test/mock.c b/tools/testing/cxl/test/mock.c
index 284416527644..de3933a776fd 100644
--- a/tools/testing/cxl/test/mock.c
+++ b/tools/testing/cxl/test/mock.c
@@ -149,21 +149,6 @@ struct cxl_hdm *__wrap_devm_cxl_setup_hdm(struct cxl_port *port,
}
EXPORT_SYMBOL_NS_GPL(__wrap_devm_cxl_setup_hdm, CXL);
-int __wrap_devm_cxl_enable_hdm(struct cxl_port *port, struct cxl_hdm *cxlhdm)
-{
- int index, rc;
- struct cxl_mock_ops *ops = get_cxl_mock_ops(&index);
-
- if (ops && ops->is_mock_port(port->uport))
- rc = 0;
- else
- rc = devm_cxl_enable_hdm(port, cxlhdm);
- put_cxl_mock_ops(index);
-
- return rc;
-}
-EXPORT_SYMBOL_NS_GPL(__wrap_devm_cxl_enable_hdm, CXL);
-
int __wrap_devm_cxl_add_passthrough_decoder(struct cxl_port *port)
{
int rc, index;