June 2023 - Linux-stable-mirror

[PATCH net] can: isotp: isotp_sendmsg(): fix return error fix on TX path

by Marc Kleine-Budde

From: Oliver Hartkopp <socketcan(a)hartkopp.net> With commit d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path") the missing correct return value in the case of a protocol error was introduced. But the way the error value has been read and sent to the user space does not follow the common scheme to clear the error after reading which is provided by the sock_error() function. This leads to an error report at the following write() attempt although everything should be working. Fixes: d674a8f123b4 ("can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX path") Reported-by: Carsten Schmidt <carsten.schmidt-achim(a)t-online.de> Signed-off-by: Oliver Hartkopp <socketcan(a)hartkopp.net> Link: https://lore.kernel.org/all/20230607072708.38809-1-socketcan@hartkopp.net Cc: stable(a)vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- net/can/isotp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/can/isotp.c b/net/can/isotp.c index 84f9aba02901..ca9d728d6d72 100644 --- a/net/can/isotp.c +++ b/net/can/isotp.c @@ -1112,8 +1112,9 @@ static int isotp_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) if (err) goto err_event_drop; - if (sk->sk_err) - return -sk->sk_err; + err = sock_error(sk); + if (err) + return err; } return size; base-commit: 7f4e09700bdc13ce9aafa279bc999051e9bcda35 -- 2.40.1

1 year, 6 months

2
1
0 0

[PATCH v2 1/1] net: phy: dp83td510: fix kernel stall during netboot in DP83TD510E PHY driver

by Oleksij Rempel

Fix an issue where the kernel would stall during netboot, showing the "sched: RT throttling activated" message. This stall was triggered by the behavior of the mii_interrupt bit (Bit 7 - DP83TD510E_STS_MII_INT) in the DP83TD510E's PHY_STS Register (Address = 0x10). The DP83TD510E datasheet (2020) states that the bit clears on write, however, in practice, the bit clears on read. This discrepancy had significant implications on the driver's interrupt handling. The PHY_STS Register was used by handle_interrupt() to check for pending interrupts and by read_status() to get the current link status. The call to read_status() was unintentionally clearing the mii_interrupt status bit without deasserting the IRQ pin, causing handle_interrupt() to miss other pending interrupts. This issue was most apparent during netboot. The fix refrains from using the PHY_STS Register for interrupt handling. Instead, we now solely rely on the INTERRUPT_REG_1 Register (Address = 0x12) and INTERRUPT_REG_2 Register (Address = 0x13) for this purpose. These registers directly influence the IRQ pin state and are latched high until read. Note: The INTERRUPT_REG_2 Register (Address = 0x13) exists and can also be used for interrupt handling, specifically for "Aneg page received interrupt" and "Polarity change interrupt". However, these features are currently not supported by this driver. Fixes: 165cd04fe253 ("net: phy: dp83td510: Add support for the DP83TD510 Ethernet PHY") Cc: <stable(a)vger.kernel.org> Signed-off-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> --- drivers/net/phy/dp83td510.c | 23 +++++------------------ 1 file changed, 5 insertions(+), 18 deletions(-) diff --git a/drivers/net/phy/dp83td510.c b/drivers/net/phy/dp83td510.c index 3cd9a77f9532..d7616b13c594 100644 --- a/drivers/net/phy/dp83td510.c +++ b/drivers/net/phy/dp83td510.c @@ -12,6 +12,11 @@ /* MDIO_MMD_VEND2 registers */ #define DP83TD510E_PHY_STS 0x10 +/* Bit 7 - mii_interrupt, active high. Clears on read. + * Note: Clearing does not necessarily deactivate IRQ pin if interrupts pending. + * This differs from the DP83TD510E datasheet (2020) which states this bit + * clears on write 0. + */ #define DP83TD510E_STS_MII_INT BIT(7) #define DP83TD510E_LINK_STATUS BIT(0) @@ -53,12 +58,6 @@ static int dp83td510_config_intr(struct phy_device *phydev) int ret; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { - /* Clear any pending interrupts */ - ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS, - 0x0); - if (ret) - return ret; - ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_INTERRUPT_REG_1, DP83TD510E_INT1_LINK_EN); @@ -81,10 +80,6 @@ static int dp83td510_config_intr(struct phy_device *phydev) DP83TD510E_GENCFG_INT_EN); if (ret) return ret; - - /* Clear any pending interrupts */ - ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS, - 0x0); } return ret; @@ -94,14 +89,6 @@ static irqreturn_t dp83td510_handle_interrupt(struct phy_device *phydev) { int ret; - ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_PHY_STS); - if (ret < 0) { - phy_error(phydev); - return IRQ_NONE; - } else if (!(ret & DP83TD510E_STS_MII_INT)) { - return IRQ_NONE; - } - /* Read the current enabled interrupts */ ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, DP83TD510E_INTERRUPT_REG_1); if (ret < 0) { -- 2.39.2

1 year, 6 months

2
1
0 0

[PATCH v2 2/6] device-mapper: Avoid pointer arithmetic overflow

by Demi Marie Obenour

Especially on 32-bit systems, it is possible for the pointer arithmetic to overflow and cause a userspace pointer to be dereferenced in the kernel. Signed-off-by: Demi Marie Obenour <demi(a)invisiblethingslab.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable(a)vger.kernel.org --- drivers/md/dm-ioctl.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 34fa74c6a70db8aa67aaba3f6a2fc4f38ef736bc..64e8f16d344c47057de5e2d29e3d63202197dca0 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1396,6 +1396,25 @@ static int next_target(struct dm_target_spec *last, uint32_t next, void *end, { static_assert(_Alignof(struct dm_target_spec) <= 8, "struct dm_target_spec has excessive alignment requirements"); + static_assert(offsetof(struct dm_ioctl, data) >= sizeof(struct dm_target_spec), + "struct dm_target_spec too big"); + + /* + * Number of bytes remaining, starting with last. This is always + * sizeof(struct dm_target_spec) or more, as otherwise *last was + * out of bounds already. + */ + size_t remaining = (char *)end - (char *)last; + + /* + * There must be room for both the next target spec and the + * NUL-terminator of the target itself. + */ + if (remaining - sizeof(struct dm_target_spec) <= next) { + DMERR("Target spec extends beyond end of parameters"); + return -EINVAL; + } + if (next % 8) { DMERR("Next target spec (offset %u) is not 8-byte aligned", next); return -EINVAL; -- Sincerely, Demi Marie Obenour (she/her/hers) Invisible Things Lab

1 year, 6 months

3
2
0 0

[PATCH 08/11] drm/amd/display: Add monitor specific edid quirk

by Rodrigo Siqueira

From: Aurabindo Pillai <aurabindo.pillai(a)amd.com> Disable FAMS on a Samsung Odyssey G9 monitor. Experiments show that this monitor does not work well under some use cases, and is likely implementation specific bug on the monitor's firmware. Cc: stable(a)vger.kernel.org Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai(a)amd.com> --- .../amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 26 +++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c index cd20cfc04996..d9a482908380 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c @@ -44,6 +44,30 @@ #include "dm_helpers.h" #include "ddc_service_types.h" +static u32 edid_extract_panel_id(struct edid *edid) +{ + return (u32)edid->mfg_id[0] << 24 | + (u32)edid->mfg_id[1] << 16 | + (u32)EDID_PRODUCT_ID(edid); +} + +static void apply_edid_quirks(struct edid *edid, struct dc_edid_caps *edid_caps) +{ + uint32_t panel_id = edid_extract_panel_id(edid); + + switch (panel_id) { + /* Workaround for some monitors which does not work well with FAMS */ + case drm_edid_encode_panel_id('S', 'A', 'M', 0x0E5E): + case drm_edid_encode_panel_id('S', 'A', 'M', 0x7053): + case drm_edid_encode_panel_id('S', 'A', 'M', 0x71AC): + DRM_DEBUG_DRIVER("Disabling FAMS on monitor with panel id %X\n", panel_id); + edid_caps->panel_patch.disable_fams = true; + break; + default: + return; + } +} + /* dm_helpers_parse_edid_caps * * Parse edid caps @@ -115,6 +139,8 @@ enum dc_edid_status dm_helpers_parse_edid_caps( else edid_caps->speaker_flags = DEFAULT_SPEAKER_LOCATION; + apply_edid_quirks(edid_buf, edid_caps); + kfree(sads); kfree(sadb); -- 2.39.2

1 year, 6 months

1
0
0 0

[PATCH 06/11] drm/amd/display: Remove Phantom Pipe Check When Calculating K1 and K2

by Rodrigo Siqueira

From: Austin Zheng <austin.zheng(a)amd.com> [Why] K1 and K2 not being setting properly when subVP is active. [How] Have phantom pipes use the same programing as the main pipes without checking the paired stream Cc: stable(a)vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2(a)amd.com> Acked-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com> Signed-off-by: Austin Zheng <austin.zheng(a)amd.com> --- drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c index 526e89ef9cdc..d52d5feeb311 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_hwseq.c @@ -1147,10 +1147,6 @@ unsigned int dcn32_calculate_dccg_k1_k2_values(struct pipe_ctx *pipe_ctx, unsign unsigned int odm_combine_factor = 0; bool two_pix_per_container = false; - // For phantom pipes, use the same programming as the main pipes - if (pipe_ctx->stream->mall_stream_config.type == SUBVP_PHANTOM) { - stream = pipe_ctx->stream->mall_stream_config.paired_stream; - } two_pix_per_container = optc2_is_two_pixels_per_containter(&stream->timing); odm_combine_factor = get_odm_config(pipe_ctx, NULL); -- 2.39.2

1 year, 6 months

1
0
0 0

[PATCH v2 1/6] device-mapper: Check that target specs are sufficiently aligned

by Demi Marie Obenour

Otherwise subsequent code will dereference a misaligned `struct dm_target_spec *`, which is undefined behavior. Signed-off-by: Demi Marie Obenour <demi(a)invisiblethingslab.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable(a)vger.kernel.org --- drivers/md/dm-ioctl.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index cc77cf3d410921432eb0c62cdede7d55b9aa674a..34fa74c6a70db8aa67aaba3f6a2fc4f38ef736bc 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1394,6 +1394,13 @@ static inline fmode_t get_mode(struct dm_ioctl *param) static int next_target(struct dm_target_spec *last, uint32_t next, void *end, struct dm_target_spec **spec, char **target_params) { + static_assert(_Alignof(struct dm_target_spec) <= 8, + "struct dm_target_spec has excessive alignment requirements"); + if (next % 8) { + DMERR("Next target spec (offset %u) is not 8-byte aligned", next); + return -EINVAL; + } + *spec = (struct dm_target_spec *) ((unsigned char *) last + next); *target_params = (char *) (*spec + 1); -- Sincerely, Demi Marie Obenour (she/her/hers) Invisible Things Lab

1 year, 6 months

2
2
0 0

[PATCH v2 3/6] device-mapper: structs and parameter strings must not overlap

by Demi Marie Obenour

The NUL terminator for each target parameter string must precede the following 'struct dm_target_spec'. Otherwise, dm_split_args() might corrupt this struct. Furthermore, the first 'struct dm_target_spec' must come after the 'struct dm_ioctl', as if it overlaps too much dm_split_args() could corrupt the 'struct dm_ioctl'. Signed-off-by: Demi Marie Obenour <demi(a)invisiblethingslab.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable(a)vger.kernel.org --- drivers/md/dm-ioctl.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index 64e8f16d344c47057de5e2d29e3d63202197dca0..da6ca26b51d0953df380582bb3a51c2ec22c27cb 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1391,7 +1391,7 @@ static inline fmode_t get_mode(struct dm_ioctl *param) return mode; } -static int next_target(struct dm_target_spec *last, uint32_t next, void *end, +static int next_target(struct dm_target_spec *last, uint32_t next, const char *end, struct dm_target_spec **spec, char **target_params) { static_assert(_Alignof(struct dm_target_spec) <= 8, @@ -1404,7 +1404,7 @@ static int next_target(struct dm_target_spec *last, uint32_t next, void *end, * sizeof(struct dm_target_spec) or more, as otherwise *last was * out of bounds already. */ - size_t remaining = (char *)end - (char *)last; + size_t remaining = end - (char *)last; /* * There must be room for both the next target spec and the @@ -1423,10 +1423,7 @@ static int next_target(struct dm_target_spec *last, uint32_t next, void *end, *spec = (struct dm_target_spec *) ((unsigned char *) last + next); *target_params = (char *) (*spec + 1); - if (*spec < (last + 1)) - return -EINVAL; - - return invalid_str(*target_params, end); + return 0; } static int populate_table(struct dm_table *table, @@ -1436,8 +1433,9 @@ static int populate_table(struct dm_table *table, unsigned int i = 0; struct dm_target_spec *spec = (struct dm_target_spec *) param; uint32_t next = param->data_start; - void *end = (void *) param + param_size; + const char *const end = (const char *) param + param_size; char *target_params; + size_t min_size = sizeof(struct dm_ioctl); if (!param->target_count) { DMERR("%s: no targets specified", __func__); @@ -1445,6 +1443,13 @@ static int populate_table(struct dm_table *table, } for (i = 0; i < param->target_count; i++) { + const char *nul_terminator; + + if (next < min_size) { + DMERR("%s: next target spec (offset %u) overlaps %s", + __func__, next, i ? "previous target" : "'struct dm_ioctl'"); + return -EINVAL; + } r = next_target(spec, next, end, &spec, &target_params); if (r) { @@ -1452,6 +1457,15 @@ static int populate_table(struct dm_table *table, return r; } + nul_terminator = memchr(target_params, 0, (size_t)(end - target_params)); + if (nul_terminator == NULL) { + DMERR("%s: target parameters not NUL-terminated", __func__); + return -EINVAL; + } + + /* Add 1 for NUL terminator */ + min_size = (size_t)(nul_terminator - (const char *)spec) + 1; + r = dm_table_add_target(table, spec->target_type, (sector_t) spec->sector_start, (sector_t) spec->length, -- Sincerely, Demi Marie Obenour (she/her/hers) Invisible Things Lab

1 year, 6 months

2
1
0 0

FAILED: patch "[PATCH] selftests: mptcp: diag: skip listen tests if not supported" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x dc97251bf0b70549c76ba261516c01b8096771c5 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023062242-ripple-resilient-26a8@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From dc97251bf0b70549c76ba261516c01b8096771c5 Mon Sep 17 00:00:00 2001 From: Matthieu Baerts <matthieu.baerts(a)tessares.net> Date: Thu, 8 Jun 2023 18:38:47 +0200 Subject: [PATCH] selftests: mptcp: diag: skip listen tests if not supported Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the listen diag dump support introduced by commit 4fa39b701ce9 ("mptcp: listen diag dump support"). It looks like there is no good pre-check to do here, i.e. dedicated function available in kallsyms. Instead, we try to get info if nothing is returned, the test is marked as skipped. That's not ideal because something could be wrong with the feature and instead of reporting an error, the test could be marked as skipped. If we know in advanced that the feature is supposed to be supported, the tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in this case the test will report an error instead of marking the test as skipped if nothing is returned. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: f2ae0fa68e28 ("selftests/mptcp: add diag listen tests") Cc: stable(a)vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh index 4eacdb1ab962..4a6165389b74 100755 --- a/tools/testing/selftests/net/mptcp/diag.sh +++ b/tools/testing/selftests/net/mptcp/diag.sh @@ -55,16 +55,20 @@ __chk_nr() { local command="$1" local expected=$2 - local msg nr + local msg="$3" + local skip="${4:-SKIP}" + local nr - shift 2 - msg=$* nr=$(eval $command) printf "%-50s" "$msg" if [ $nr != $expected ]; then - echo "[ fail ] expected $expected found $nr" - ret=$test_cnt + if [ $nr = "$skip" ] && ! mptcp_lib_expect_all_features; then + echo "[ skip ] Feature probably not supported" + else + echo "[ fail ] expected $expected found $nr" + ret=$test_cnt + fi else echo "[ ok ]" fi @@ -76,12 +80,12 @@ __chk_msk_nr() local condition=$1 shift 1 - __chk_nr "ss -inmHMN $ns | $condition" $* + __chk_nr "ss -inmHMN $ns | $condition" "$@" } chk_msk_nr() { - __chk_msk_nr "grep -c token:" $* + __chk_msk_nr "grep -c token:" "$@" } wait_msk_nr() @@ -119,37 +123,26 @@ wait_msk_nr() chk_msk_fallback_nr() { - __chk_msk_nr "grep -c fallback" $* + __chk_msk_nr "grep -c fallback" "$@" } chk_msk_remote_key_nr() { - __chk_msk_nr "grep -c remote_key" $* + __chk_msk_nr "grep -c remote_key" "$@" } __chk_listen() { local filter="$1" local expected=$2 + local msg="$3" - shift 2 - msg=$* - - nr=$(ss -N $ns -Ml "$filter" | grep -c LISTEN) - printf "%-50s" "$msg" - - if [ $nr != $expected ]; then - echo "[ fail ] expected $expected found $nr" - ret=$test_cnt - else - echo "[ ok ]" - fi + __chk_nr "ss -N $ns -Ml '$filter' | grep -c LISTEN" "$expected" "$msg" 0 } chk_msk_listen() { lport=$1 - local msg="check for listen socket" # destination port search should always return empty list __chk_listen "dport $lport" 0 "listen match for dport $lport" @@ -167,10 +160,9 @@ chk_msk_listen() chk_msk_inuse() { local expected=$1 + local msg="$2" local listen_nr - shift 1 - listen_nr=$(ss -N "${ns}" -Ml | grep -c LISTEN) expected=$((expected + listen_nr)) @@ -181,7 +173,7 @@ chk_msk_inuse() sleep 0.1 done - __chk_nr get_msk_inuse $expected $* + __chk_nr get_msk_inuse $expected "$msg" } # $1: ns, $2: port

1 year, 6 months

3
5
0 0

FAILED: patch "[PATCH] selftests: mptcp: pm nl: remove hardcoded default limits" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 2177d0b08e421971e035672b70f3228d9485c650 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023062218-porous-squiggle-d837@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 2177d0b08e421971e035672b70f3228d9485c650 Mon Sep 17 00:00:00 2001 From: Matthieu Baerts <matthieu.baerts(a)tessares.net> Date: Thu, 8 Jun 2023 18:38:49 +0200 Subject: [PATCH] selftests: mptcp: pm nl: remove hardcoded default limits Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the checks of the default limits returned by the MPTCP in-kernel path-manager. The default values have been modified by commit 72bcbc46a5c3 ("mptcp: increase default max additional subflows to 2"). Instead of comparing with hardcoded values, we can get the default one and compare with them. Note that if we expect to have the latest version, we continue to check the hardcoded values to avoid unexpected behaviour changes. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: eedbc685321b ("selftests: add PM netlink functional tests") Cc: stable(a)vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> diff --git a/tools/testing/selftests/net/mptcp/pm_netlink.sh b/tools/testing/selftests/net/mptcp/pm_netlink.sh index 32f7533e0919..664cafc60705 100755 --- a/tools/testing/selftests/net/mptcp/pm_netlink.sh +++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh @@ -73,8 +73,12 @@ check() } check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "defaults addr list" -check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0 + +default_limits="$(ip netns exec $ns1 ./pm_nl_ctl limits)" +if mptcp_lib_expect_all_features; then + check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0 subflows 2" "defaults limits" +fi ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.1 ip netns exec $ns1 ./pm_nl_ctl add 10.0.1.2 flags subflow dev lo @@ -121,12 +125,10 @@ ip netns exec $ns1 ./pm_nl_ctl flush check "ip netns exec $ns1 ./pm_nl_ctl dump" "" "flush addrs" ip netns exec $ns1 ./pm_nl_ctl limits 9 1 -check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0 -subflows 2" "rcv addrs above hard limit" +check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "rcv addrs above hard limit" ip netns exec $ns1 ./pm_nl_ctl limits 1 9 -check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 0 -subflows 2" "subflows above hard limit" +check "ip netns exec $ns1 ./pm_nl_ctl limits" "$default_limits" "subflows above hard limit" ip netns exec $ns1 ./pm_nl_ctl limits 8 8 check "ip netns exec $ns1 ./pm_nl_ctl limits" "accept 8

1 year, 6 months

3
2
0 0

[PATCH 6.1.y] selftests: mptcp: join: fix "userspace pm add & remove address"

by Matthieu Baerts

It looks like this test was broken in v6.1 after the backport of commit 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests"). It was not working because the commit ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows") is not in v6.1. This commit changes how the connections are being created in mptcp_join.sh selftest: with IPv6 support always enabled. But then in v6.1, the server still create IPv4 only connections, so without the v4-mapped-v6 format with the "::ffff:" prefix like we have in v6.3. The modification here adds a support for connections created in v4 as well so it fixes the issue in v6.1. This patch is not needed for the selftests in v6.3 because only IPv6 listening sockets are being created. Fixes: 8f0ba8ec18f5 ("selftests: mptcp: update userspace pm addr tests") Cc: stable(a)vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts(a)tessares.net> --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index 2a238ae842d8..7b65003ee8cf 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -946,11 +946,12 @@ do_transfer() sp=$(grep "type:10" "$evts_ns1" | sed -n 's/.*$sport:$$[[:digit:]]*$.*$/\2/p;q') da=$(grep "type:10" "$evts_ns1" | - sed -n 's/.*$daddr6:$$[0-9a-f:.]*$.*$/\2/p;q') + sed -n 's/.*$daddr[46]:$$[0-9a-f:.]*$.*$/\2/p;q') + echo "$da" | grep -q ":" && addr="::ffff:$addr" dp=$(grep "type:10" "$evts_ns1" | sed -n 's/.*$dport:$$[[:digit:]]*$.*$/\2/p;q') ip netns exec ${listener_ns} ./pm_nl_ctl rem token $tk id $id - ip netns exec ${listener_ns} ./pm_nl_ctl dsf lip "::ffff:$addr" \ + ip netns exec ${listener_ns} ./pm_nl_ctl dsf lip "$addr" \ lport $sp rip $da rport $dp token $tk fi -- 2.40.1

1 year, 6 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2023