Starting v6.5, Bluetooth does not work at all on my T2
MacBookAir9,1 with the BCM4377 chip. When I boot up the computer,
go into bluetoothctl, and then try to run commands like scan on,
show, list, it returns "No default controller available." I have
tried reloading the kernel module, in which the log outputs
"{Added,Removed} hci0 (unconfigured)." With this patch, I
am able to use Bluetooth as normal without any errors regarding
hci0 being unconfigured. However, an issue is still present
where sometimes hci_bcm4377 will have to be reloaded in order to
get bluetooth to work. I believe this was still present before
the previously mentioned commit.
I would also like to thank Kerem Karabay <kekrby(a)gmail.com> for
assisting me with this patch.
Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Felix Zhang <mrman(a)mrman314.tech>
---
v4:
* Adjust the format to pass the CI (again).
* Shorten description
---
drivers/bluetooth/hci_bcm4377.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_bcm4377.c
b/drivers/bluetooth/hci_bcm4377.c
index a61757835695..5c6fef1aa0f6 100644
--- a/drivers/bluetooth/hci_bcm4377.c
+++ b/drivers/bluetooth/hci_bcm4377.c
@@ -513,6 +513,7 @@ struct bcm4377_hw {
unsigned long broken_ext_scan : 1;
unsigned long broken_mws_transport_config : 1;
unsigned long broken_le_coded : 1;
+ unsigned long use_bdaddr_property : 1;
int (*send_calibration)(struct bcm4377_data *bcm4377);
int (*send_ptb)(struct bcm4377_data *bcm4377,
@@ -2368,5 +2369,6 @@ static int bcm4377_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
hdev->set_bdaddr = bcm4377_hci_set_bdaddr;
hdev->setup = bcm4377_hci_setup;
- set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
+ if (bcm4377->hw->use_bdaddr_property)
+ set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
if (bcm4377->hw->broken_mws_transport_config)
@@ -2465,6 +2467,7 @@ static const struct bcm4377_hw
bcm4377_hw_variants[] = {
.has_bar0_core2_window2 = true,
.broken_mws_transport_config = true,
.broken_le_coded = true,
+ .use_bdaddr_property = true,
.send_calibration = bcm4378_send_calibration,
.send_ptb = bcm4378_send_ptb,
},
@@ -2479,6 +2482,7 @@ static const struct bcm4377_hw
bcm4377_hw_variants[] = {
.clear_pciecfg_subsystem_ctrl_bit19 = true,
.broken_mws_transport_config = true,
.broken_le_coded = true,
+ .use_bdaddr_property = true,
.send_calibration = bcm4387_send_calibration,
.send_ptb = bcm4378_send_ptb,
},
--
2.43.0
Starting v6.5, Bluetooth does not work at all on my T2 MacBookAir9,1
with the BCM4377 chip. When I boot up the computer, go into
bluetoothctl, and then try to run commands like scan on, show, list,
it returns "No default controller available." I have tried reloading
the
kernel module, in which the log outputs "{Added,Removed} hci0
(unconfigured)." With this patch, I am able to use Bluetooth as
normal
without any errors regarding hci0 being unconfigured. However, an
issue is still present where sometimes hci_bcm4377 will have to be
reloaded in order to get bluetooth to work. I believe this was still
present before the previously mentioned commit.
Due to the bit HCI_QUIRK_USE_BDADDR_PROPERTY being always set in
drivers/bluetooth/hci_bcm4377.c (line 2371), the chip would be left
unconfigured on kernels compiled after commit 6945795bc81a
("Bluetooth:
fix use-bdaddr-property quirk") due to a change in its logic. On the
M1 Macs, the device would be configured in the devicetree. However,
that is not the case on T2 Macs. Because the bluetooth adapter is
left
unconfigured, it is not usable in the operating system. In order to
circumvent this issue, a flag is added to prevent the bit from being
set on the BCM4377, while setting it on the other devices.
Because I do not have an M1 device to test this patch on, I am not sure
whether the patch breaks anything for said devices. I would be very
grateful if anyone is willing to test this patch on their M1 device.
I would also like to thank Kerem Karabay <kekrby(a)gmail.com> for
assisting me with this patch.
Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk")
Signed-off-by: Felix Zhang <mrman(a)mrman314.tech>
---
v3:
* Adjust the format to pass the CI (again).
---
drivers/bluetooth/hci_bcm4377.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/hci_bcm4377.c
b/drivers/bluetooth/hci_bcm4377.c
index a61757835695..5c6fef1aa0f6 100644
--- a/drivers/bluetooth/hci_bcm4377.c
+++ b/drivers/bluetooth/hci_bcm4377.c
@@ -513,6 +513,7 @@ struct bcm4377_hw {
unsigned long broken_ext_scan : 1;
unsigned long broken_mws_transport_config : 1;
unsigned long broken_le_coded : 1;
+ unsigned long use_bdaddr_property : 1;
int (*send_calibration)(struct bcm4377_data *bcm4377);
int (*send_ptb)(struct bcm4377_data *bcm4377,
@@ -2368,7 +2369,8 @@ static int bcm4377_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
hdev->set_bdaddr = bcm4377_hci_set_bdaddr;
hdev->setup = bcm4377_hci_setup;
- set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
+ if (bcm4377->hw->use_bdaddr_property)
+ set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
if (bcm4377->hw->broken_mws_transport_config)
set_bit(HCI_QUIRK_BROKEN_MWS_TRANSPORT_CONFIG, &hdev-
>quirks);
if (bcm4377->hw->broken_ext_scan)
@@ -2465,6 +2467,7 @@ static const struct bcm4377_hw
bcm4377_hw_variants[] = {
.has_bar0_core2_window2 = true,
.broken_mws_transport_config = true,
.broken_le_coded = true,
+ .use_bdaddr_property = true,
.send_calibration = bcm4378_send_calibration,
.send_ptb = bcm4378_send_ptb,
},
@@ -2479,6 +2482,7 @@ static const struct bcm4377_hw
bcm4377_hw_variants[] = {
.clear_pciecfg_subsystem_ctrl_bit19 = true,
.broken_mws_transport_config = true,
.broken_le_coded = true,
+ .use_bdaddr_property = true,
.send_calibration = bcm4387_send_calibration,
.send_ptb = bcm4378_send_ptb,
},
--
2.43.0
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emmits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneoulsy, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file permissions.
Two possible solutions exist:
- Trim parameter "cmd" to a u16 so that only the last two bytes are
checked in the case statement.
- Explicitily add the FS_IOC32_* codes to the case statement.
Solution 2 was chosen because it is a minimal explicit change. Solution
1 is a more elegant change, but is less explicit, as the switch
statement appears to only check the FS_IOC_* codes upon first reading.
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic(a)google.com>
---
security/selinux/hooks.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index d06e350fedee..bba83f437a1d 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3644,11 +3644,15 @@ static int selinux_file_ioctl(struct file *file, unsigned int cmd,
case FIGETBSZ:
case FS_IOC_GETFLAGS:
case FS_IOC_GETVERSION:
+ case FS_IOC32_GETFLAGS:
+ case FS_IOC32_GETVERSION:
error = file_has_perm(cred, file, FILE__GETATTR);
break;
case FS_IOC_SETFLAGS:
case FS_IOC_SETVERSION:
+ case FS_IOC32_SETFLAGS:
+ case FS_IOC32_SETVERSION:
error = file_has_perm(cred, file, FILE__SETATTR);
break;
base-commit: 50a510a78287c15cee644f345ef8bac8977986a7
--
2.42.0.283.g2d96d420d3-goog
From: José Pekkarinen <jose.pekkarinen(a)foxhound.fi>
[ Upstream commit c1f342f35f820b33390571293498c3e2e9bc77ec ]
Observed on dmesg of my laptop I see the following
output:
[ 19.898700] psmouse serio1: synaptics: queried max coordinates: x [..5678], y [..4694]
[ 19.936057] psmouse serio1: synaptics: queried min coordinates: x [1266..], y [1162..]
[ 19.936076] psmouse serio1: synaptics: Your touchpad (PNP: LEN0411 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input(a)vger.kernel.org.
[ 20.008901] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.32, id: 0x1e2a1, caps: 0xf014a3/0x940300/0x12e800/0x500000, board id: 3471, fw id: 2909640
[ 20.008925] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 20.053344] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 20.397608] mousedev: PS/2 mouse device common for all mice
This patch will add its pnp id to the smbus list to
produce the setup of intertouch for the device.
Signed-off-by: José Pekkarinen <jose.pekkarinen(a)foxhound.fi>
Link: https://lore.kernel.org/r/20231114063607.71772-1-jose.pekkarinen@foxhound.fi
Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com>
Signed-off-by: Sasha Levin <sashal(a)kernel.org>
---
drivers/input/mouse/synaptics.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 22d16d80efb93..7a303a9d6bf72 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -183,6 +183,7 @@ static const char * const smbus_pnp_ids[] = {
"LEN009b", /* T580 */
"LEN0402", /* X1 Extreme Gen 2 / P1 Gen 2 */
"LEN040f", /* P1 Gen 3 */
+ "LEN0411", /* L14 Gen 1 */
"LEN200f", /* T450s */
"LEN2044", /* L470 */
"LEN2054", /* E480 */
--
2.43.0