December 2023 - Linux-stable-mirror

FAILED: patch "[PATCH] iio: imu: adis16475: add spi_device_id table" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x ee4d79055aeea27f1b8c42233cc0c90d0a8b5355 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122822-plow-yahoo-3622@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: ee4d79055aee ("iio: imu: adis16475: add spi_device_id table") 21fd77afa113 ("iio: imu: remove unused private data assigned with spi_set_drvdata()") 30f6a542b7d3 ("iio:imu:adis: Use IRQF_NO_AUTOEN instead of irq request then disable") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ee4d79055aeea27f1b8c42233cc0c90d0a8b5355 Mon Sep 17 00:00:00 2001 From: Nuno Sa <nuno.sa(a)analog.com> Date: Thu, 2 Nov 2023 13:52:58 +0100 Subject: [PATCH] iio: imu: adis16475: add spi_device_id table This prevents the warning message "SPI driver has no spi_device_id for..." when registering the driver. More importantly, it makes sure that module autoloading works as spi relies on spi: modaliases and not of. While at it, move the of_device_id table to it's natural place. Fixes: fff7352bf7a3c ("iio: imu: Add support for adis16475") Signed-off-by: Nuno Sa <nuno.sa(a)analog.com> Link: https://lore.kernel.org/r/20231102125258.3284830-1-nuno.sa@analog.com Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c index b7cbe1565aee..04153a2725d5 100644 --- a/drivers/iio/imu/adis16475.c +++ b/drivers/iio/imu/adis16475.c @@ -1406,50 +1406,6 @@ static int adis16475_config_irq_pin(struct adis16475 *st) return 0; } -static const struct of_device_id adis16475_of_match[] = { - { .compatible = "adi,adis16470", - .data = &adis16475_chip_info[ADIS16470] }, - { .compatible = "adi,adis16475-1", - .data = &adis16475_chip_info[ADIS16475_1] }, - { .compatible = "adi,adis16475-2", - .data = &adis16475_chip_info[ADIS16475_2] }, - { .compatible = "adi,adis16475-3", - .data = &adis16475_chip_info[ADIS16475_3] }, - { .compatible = "adi,adis16477-1", - .data = &adis16475_chip_info[ADIS16477_1] }, - { .compatible = "adi,adis16477-2", - .data = &adis16475_chip_info[ADIS16477_2] }, - { .compatible = "adi,adis16477-3", - .data = &adis16475_chip_info[ADIS16477_3] }, - { .compatible = "adi,adis16465-1", - .data = &adis16475_chip_info[ADIS16465_1] }, - { .compatible = "adi,adis16465-2", - .data = &adis16475_chip_info[ADIS16465_2] }, - { .compatible = "adi,adis16465-3", - .data = &adis16475_chip_info[ADIS16465_3] }, - { .compatible = "adi,adis16467-1", - .data = &adis16475_chip_info[ADIS16467_1] }, - { .compatible = "adi,adis16467-2", - .data = &adis16475_chip_info[ADIS16467_2] }, - { .compatible = "adi,adis16467-3", - .data = &adis16475_chip_info[ADIS16467_3] }, - { .compatible = "adi,adis16500", - .data = &adis16475_chip_info[ADIS16500] }, - { .compatible = "adi,adis16505-1", - .data = &adis16475_chip_info[ADIS16505_1] }, - { .compatible = "adi,adis16505-2", - .data = &adis16475_chip_info[ADIS16505_2] }, - { .compatible = "adi,adis16505-3", - .data = &adis16475_chip_info[ADIS16505_3] }, - { .compatible = "adi,adis16507-1", - .data = &adis16475_chip_info[ADIS16507_1] }, - { .compatible = "adi,adis16507-2", - .data = &adis16475_chip_info[ADIS16507_2] }, - { .compatible = "adi,adis16507-3", - .data = &adis16475_chip_info[ADIS16507_3] }, - { }, -}; -MODULE_DEVICE_TABLE(of, adis16475_of_match); static int adis16475_probe(struct spi_device *spi) { @@ -1463,7 +1419,7 @@ static int adis16475_probe(struct spi_device *spi) st = iio_priv(indio_dev); - st->info = device_get_match_data(&spi->dev); + st->info = spi_get_device_match_data(spi); if (!st->info) return -EINVAL; @@ -1503,12 +1459,83 @@ static int adis16475_probe(struct spi_device *spi) return 0; } +static const struct of_device_id adis16475_of_match[] = { + { .compatible = "adi,adis16470", + .data = &adis16475_chip_info[ADIS16470] }, + { .compatible = "adi,adis16475-1", + .data = &adis16475_chip_info[ADIS16475_1] }, + { .compatible = "adi,adis16475-2", + .data = &adis16475_chip_info[ADIS16475_2] }, + { .compatible = "adi,adis16475-3", + .data = &adis16475_chip_info[ADIS16475_3] }, + { .compatible = "adi,adis16477-1", + .data = &adis16475_chip_info[ADIS16477_1] }, + { .compatible = "adi,adis16477-2", + .data = &adis16475_chip_info[ADIS16477_2] }, + { .compatible = "adi,adis16477-3", + .data = &adis16475_chip_info[ADIS16477_3] }, + { .compatible = "adi,adis16465-1", + .data = &adis16475_chip_info[ADIS16465_1] }, + { .compatible = "adi,adis16465-2", + .data = &adis16475_chip_info[ADIS16465_2] }, + { .compatible = "adi,adis16465-3", + .data = &adis16475_chip_info[ADIS16465_3] }, + { .compatible = "adi,adis16467-1", + .data = &adis16475_chip_info[ADIS16467_1] }, + { .compatible = "adi,adis16467-2", + .data = &adis16475_chip_info[ADIS16467_2] }, + { .compatible = "adi,adis16467-3", + .data = &adis16475_chip_info[ADIS16467_3] }, + { .compatible = "adi,adis16500", + .data = &adis16475_chip_info[ADIS16500] }, + { .compatible = "adi,adis16505-1", + .data = &adis16475_chip_info[ADIS16505_1] }, + { .compatible = "adi,adis16505-2", + .data = &adis16475_chip_info[ADIS16505_2] }, + { .compatible = "adi,adis16505-3", + .data = &adis16475_chip_info[ADIS16505_3] }, + { .compatible = "adi,adis16507-1", + .data = &adis16475_chip_info[ADIS16507_1] }, + { .compatible = "adi,adis16507-2", + .data = &adis16475_chip_info[ADIS16507_2] }, + { .compatible = "adi,adis16507-3", + .data = &adis16475_chip_info[ADIS16507_3] }, + { }, +}; +MODULE_DEVICE_TABLE(of, adis16475_of_match); + +static const struct spi_device_id adis16475_ids[] = { + { "adis16470", (kernel_ulong_t)&adis16475_chip_info[ADIS16470] }, + { "adis16475-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16475_1] }, + { "adis16475-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16475_2] }, + { "adis16475-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16475_3] }, + { "adis16477-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16477_1] }, + { "adis16477-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16477_2] }, + { "adis16477-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16477_3] }, + { "adis16465-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16465_1] }, + { "adis16465-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16465_2] }, + { "adis16465-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16465_3] }, + { "adis16467-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16467_1] }, + { "adis16467-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16467_2] }, + { "adis16467-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16467_3] }, + { "adis16500", (kernel_ulong_t)&adis16475_chip_info[ADIS16500] }, + { "adis16505-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16505_1] }, + { "adis16505-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16505_2] }, + { "adis16505-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16505_3] }, + { "adis16507-1", (kernel_ulong_t)&adis16475_chip_info[ADIS16507_1] }, + { "adis16507-2", (kernel_ulong_t)&adis16475_chip_info[ADIS16507_2] }, + { "adis16507-3", (kernel_ulong_t)&adis16475_chip_info[ADIS16507_3] }, + { } +}; +MODULE_DEVICE_TABLE(spi, adis16475_ids); + static struct spi_driver adis16475_driver = { .driver = { .name = "adis16475", .of_match_table = adis16475_of_match, }, .probe = adis16475_probe, + .id_table = adis16475_ids, }; module_spi_driver(adis16475_driver);

9 months, 4 weeks

1
0
0 0

FAILED: patch "[PATCH] net: usb: ax88179_178a: avoid failed operations when device" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.14.y git checkout FETCH_HEAD git cherry-pick -x aef05e349bfd81c95adb4489639413fadbb74a83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122857-crispness-haphazard-0d2a@gregkh' --subject-prefix 'PATCH 4.14.y' HEAD^.. Possible dependencies: aef05e349bfd ("net: usb: ax88179_178a: avoid failed operations when device is disconnected") 5050531610a6 ("net: usb: ax88179_178a: wol optimizations") 843f92052da7 ("net: usb: ax88179_178a: clean up pm calls") 766607570bec ("ethernet: constify references to netdev->dev_addr in drivers") 7b3c8e27d67e ("bnxt_en: Move bnxt_approve_mac().") bd78980be1a6 ("net: usb: ax88179_178a: initialize local variables before use") de6e0b198239 ("net: ethernet: actions: Add Actions Semi Owl Ethernet MAC driver") 4dca650991e4 ("net/mlx5: Enable QP number request when creating IPoIB underlay QP") 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") 40f05e5b0d0e ("net: atlantic: proper rss_ctrl1 (54c0) initialization") 43c670c8e48a ("net: atlantic: A2 ingress / egress hw configuration") e54dcf4bba3e ("net: atlantic: basic A2 init/deinit hw_ops") ec7629e0c221 ("net: atlantic: HW bindings for basic A2 init/deinit hw_ops") 3417368494db ("net: atlantic: add A2 RPF hw_ops") 57fe8fd2255c ("net: atlantic: HW bindings for A2 RFP") b3f0c79cba20 ("net: atlantic: A2 hw_ops skeleton") 5cfd54d7dc18 ("net: atlantic: minimal A2 fw_ops") 258ff0cf61d6 ("net: atlantic: minimal A2 HW bindings required for fw_ops") f67619611b4c ("net: atlantic: A2 driver-firmware interface") c6168161f693 ("net/mlx5: Add support for release all pages event") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From aef05e349bfd81c95adb4489639413fadbb74a83 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Date: Thu, 7 Dec 2023 18:50:07 +0100 Subject: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected When the device is disconnected we get the following messages showing failed operations: Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 The reason is that although the device is detached, normal stop and unbind operations are commanded from the driver. These operations are not necessary in this situation, so avoid these logs when the device is detached if the result of the operation is -ENODEV and if the new flag informing about the disconnecting status is enabled. cc: <stable(a)vger.kernel.org> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 4ea0e155bb0d..5a1bf42ce156 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -173,6 +173,7 @@ struct ax88179_data { u8 in_pm; u32 wol_supported; u32 wolopts; + u8 disconnecting; }; struct ax88179_int_data { @@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n", index, ret); @@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n", index, ret); @@ -492,6 +495,20 @@ static int ax88179_resume(struct usb_interface *intf) return usbnet_resume(intf); } +static void ax88179_disconnect(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct ax88179_data *ax179_data; + + if (!dev) + return; + + ax179_data = dev->driver_priv; + ax179_data->disconnecting = 1; + + usbnet_disconnect(intf); +} + static void ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) { @@ -1906,7 +1923,7 @@ static struct usb_driver ax88179_178a_driver = { .suspend = ax88179_suspend, .resume = ax88179_resume, .reset_resume = ax88179_resume, - .disconnect = usbnet_disconnect, + .disconnect = ax88179_disconnect, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, };

10 months

1
0
0 0

FAILED: patch "[PATCH] net: usb: ax88179_178a: avoid failed operations when device" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x aef05e349bfd81c95adb4489639413fadbb74a83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122855-periscope-hamlet-2e77@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: aef05e349bfd ("net: usb: ax88179_178a: avoid failed operations when device is disconnected") 5050531610a6 ("net: usb: ax88179_178a: wol optimizations") 843f92052da7 ("net: usb: ax88179_178a: clean up pm calls") 766607570bec ("ethernet: constify references to netdev->dev_addr in drivers") 7b3c8e27d67e ("bnxt_en: Move bnxt_approve_mac().") bd78980be1a6 ("net: usb: ax88179_178a: initialize local variables before use") de6e0b198239 ("net: ethernet: actions: Add Actions Semi Owl Ethernet MAC driver") 4dca650991e4 ("net/mlx5: Enable QP number request when creating IPoIB underlay QP") 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") 40f05e5b0d0e ("net: atlantic: proper rss_ctrl1 (54c0) initialization") 43c670c8e48a ("net: atlantic: A2 ingress / egress hw configuration") e54dcf4bba3e ("net: atlantic: basic A2 init/deinit hw_ops") ec7629e0c221 ("net: atlantic: HW bindings for basic A2 init/deinit hw_ops") 3417368494db ("net: atlantic: add A2 RPF hw_ops") 57fe8fd2255c ("net: atlantic: HW bindings for A2 RFP") b3f0c79cba20 ("net: atlantic: A2 hw_ops skeleton") 5cfd54d7dc18 ("net: atlantic: minimal A2 fw_ops") 258ff0cf61d6 ("net: atlantic: minimal A2 HW bindings required for fw_ops") f67619611b4c ("net: atlantic: A2 driver-firmware interface") c6168161f693 ("net/mlx5: Add support for release all pages event") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From aef05e349bfd81c95adb4489639413fadbb74a83 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Date: Thu, 7 Dec 2023 18:50:07 +0100 Subject: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected When the device is disconnected we get the following messages showing failed operations: Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 The reason is that although the device is detached, normal stop and unbind operations are commanded from the driver. These operations are not necessary in this situation, so avoid these logs when the device is detached if the result of the operation is -ENODEV and if the new flag informing about the disconnecting status is enabled. cc: <stable(a)vger.kernel.org> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 4ea0e155bb0d..5a1bf42ce156 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -173,6 +173,7 @@ struct ax88179_data { u8 in_pm; u32 wol_supported; u32 wolopts; + u8 disconnecting; }; struct ax88179_int_data { @@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n", index, ret); @@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n", index, ret); @@ -492,6 +495,20 @@ static int ax88179_resume(struct usb_interface *intf) return usbnet_resume(intf); } +static void ax88179_disconnect(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct ax88179_data *ax179_data; + + if (!dev) + return; + + ax179_data = dev->driver_priv; + ax179_data->disconnecting = 1; + + usbnet_disconnect(intf); +} + static void ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) { @@ -1906,7 +1923,7 @@ static struct usb_driver ax88179_178a_driver = { .suspend = ax88179_suspend, .resume = ax88179_resume, .reset_resume = ax88179_resume, - .disconnect = usbnet_disconnect, + .disconnect = ax88179_disconnect, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, };

10 months

1
0
0 0

FAILED: patch "[PATCH] net: usb: ax88179_178a: avoid failed operations when device" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x aef05e349bfd81c95adb4489639413fadbb74a83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122854-resend-spinach-4d47@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: aef05e349bfd ("net: usb: ax88179_178a: avoid failed operations when device is disconnected") 5050531610a6 ("net: usb: ax88179_178a: wol optimizations") 843f92052da7 ("net: usb: ax88179_178a: clean up pm calls") 766607570bec ("ethernet: constify references to netdev->dev_addr in drivers") 7b3c8e27d67e ("bnxt_en: Move bnxt_approve_mac().") bd78980be1a6 ("net: usb: ax88179_178a: initialize local variables before use") de6e0b198239 ("net: ethernet: actions: Add Actions Semi Owl Ethernet MAC driver") 4dca650991e4 ("net/mlx5: Enable QP number request when creating IPoIB underlay QP") 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver") 40f05e5b0d0e ("net: atlantic: proper rss_ctrl1 (54c0) initialization") 43c670c8e48a ("net: atlantic: A2 ingress / egress hw configuration") e54dcf4bba3e ("net: atlantic: basic A2 init/deinit hw_ops") ec7629e0c221 ("net: atlantic: HW bindings for basic A2 init/deinit hw_ops") 3417368494db ("net: atlantic: add A2 RPF hw_ops") 57fe8fd2255c ("net: atlantic: HW bindings for A2 RFP") b3f0c79cba20 ("net: atlantic: A2 hw_ops skeleton") 5cfd54d7dc18 ("net: atlantic: minimal A2 fw_ops") 258ff0cf61d6 ("net: atlantic: minimal A2 HW bindings required for fw_ops") f67619611b4c ("net: atlantic: A2 driver-firmware interface") c6168161f693 ("net/mlx5: Add support for release all pages event") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From aef05e349bfd81c95adb4489639413fadbb74a83 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Date: Thu, 7 Dec 2023 18:50:07 +0100 Subject: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected When the device is disconnected we get the following messages showing failed operations: Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 The reason is that although the device is detached, normal stop and unbind operations are commanded from the driver. These operations are not necessary in this situation, so avoid these logs when the device is detached if the result of the operation is -ENODEV and if the new flag informing about the disconnecting status is enabled. cc: <stable(a)vger.kernel.org> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 4ea0e155bb0d..5a1bf42ce156 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -173,6 +173,7 @@ struct ax88179_data { u8 in_pm; u32 wol_supported; u32 wolopts; + u8 disconnecting; }; struct ax88179_int_data { @@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n", index, ret); @@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n", index, ret); @@ -492,6 +495,20 @@ static int ax88179_resume(struct usb_interface *intf) return usbnet_resume(intf); } +static void ax88179_disconnect(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct ax88179_data *ax179_data; + + if (!dev) + return; + + ax179_data = dev->driver_priv; + ax179_data->disconnecting = 1; + + usbnet_disconnect(intf); +} + static void ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) { @@ -1906,7 +1923,7 @@ static struct usb_driver ax88179_178a_driver = { .suspend = ax88179_suspend, .resume = ax88179_resume, .reset_resume = ax88179_resume, - .disconnect = usbnet_disconnect, + .disconnect = ax88179_disconnect, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, };

10 months

1
0
0 0

FAILED: patch "[PATCH] net: usb: ax88179_178a: avoid failed operations when device" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x aef05e349bfd81c95adb4489639413fadbb74a83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122852-twitter-ransack-4715@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: aef05e349bfd ("net: usb: ax88179_178a: avoid failed operations when device is disconnected") 5050531610a6 ("net: usb: ax88179_178a: wol optimizations") 843f92052da7 ("net: usb: ax88179_178a: clean up pm calls") 766607570bec ("ethernet: constify references to netdev->dev_addr in drivers") 7b3c8e27d67e ("bnxt_en: Move bnxt_approve_mac().") bd78980be1a6 ("net: usb: ax88179_178a: initialize local variables before use") de6e0b198239 ("net: ethernet: actions: Add Actions Semi Owl Ethernet MAC driver") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From aef05e349bfd81c95adb4489639413fadbb74a83 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Date: Thu, 7 Dec 2023 18:50:07 +0100 Subject: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected When the device is disconnected we get the following messages showing failed operations: Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 The reason is that although the device is detached, normal stop and unbind operations are commanded from the driver. These operations are not necessary in this situation, so avoid these logs when the device is detached if the result of the operation is -ENODEV and if the new flag informing about the disconnecting status is enabled. cc: <stable(a)vger.kernel.org> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 4ea0e155bb0d..5a1bf42ce156 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -173,6 +173,7 @@ struct ax88179_data { u8 in_pm; u32 wol_supported; u32 wolopts; + u8 disconnecting; }; struct ax88179_int_data { @@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n", index, ret); @@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n", index, ret); @@ -492,6 +495,20 @@ static int ax88179_resume(struct usb_interface *intf) return usbnet_resume(intf); } +static void ax88179_disconnect(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct ax88179_data *ax179_data; + + if (!dev) + return; + + ax179_data = dev->driver_priv; + ax179_data->disconnecting = 1; + + usbnet_disconnect(intf); +} + static void ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) { @@ -1906,7 +1923,7 @@ static struct usb_driver ax88179_178a_driver = { .suspend = ax88179_suspend, .resume = ax88179_resume, .reset_resume = ax88179_resume, - .disconnect = usbnet_disconnect, + .disconnect = ax88179_disconnect, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, };

10 months

1
0
0 0

FAILED: patch "[PATCH] net: usb: ax88179_178a: avoid failed operations when device" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x aef05e349bfd81c95adb4489639413fadbb74a83 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122851-liqueur-sitter-a95e@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: aef05e349bfd ("net: usb: ax88179_178a: avoid failed operations when device is disconnected") 5050531610a6 ("net: usb: ax88179_178a: wol optimizations") 843f92052da7 ("net: usb: ax88179_178a: clean up pm calls") 766607570bec ("ethernet: constify references to netdev->dev_addr in drivers") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From aef05e349bfd81c95adb4489639413fadbb74a83 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Date: Thu, 7 Dec 2023 18:50:07 +0100 Subject: [PATCH] net: usb: ax88179_178a: avoid failed operations when device is disconnected When the device is disconnected we get the following messages showing failed operations: Nov 28 20:22:11 localhost kernel: usb 2-3: USB disconnect, device number 2 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: unregister 'ax88179_178a' usb-0000:02:00.0-3, ASIX AX88179 USB 3.0 Gigabit Ethernet Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to read reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3: Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0001: -19 Nov 28 20:22:11 localhost kernel: ax88179_178a 2-3:1.0 enp2s0u3 (unregistered): Failed to write reg index 0x0002: -19 The reason is that although the device is detached, normal stop and unbind operations are commanded from the driver. These operations are not necessary in this situation, so avoid these logs when the device is detached if the result of the operation is -ENODEV and if the new flag informing about the disconnecting status is enabled. cc: <stable(a)vger.kernel.org> Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm(a)redhat.com> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Link: https://lore.kernel.org/r/20231207175007.263907-1-jtornosm@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index 4ea0e155bb0d..5a1bf42ce156 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -173,6 +173,7 @@ struct ax88179_data { u8 in_pm; u32 wol_supported; u32 wolopts; + u8 disconnecting; }; struct ax88179_int_data { @@ -208,6 +209,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -219,7 +221,7 @@ static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n", index, ret); @@ -231,6 +233,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, { int ret; int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); + struct ax88179_data *ax179_data = dev->driver_priv; BUG_ON(!dev); @@ -242,7 +245,7 @@ static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, value, index, data, size); - if (unlikely(ret < 0)) + if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting))) netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n", index, ret); @@ -492,6 +495,20 @@ static int ax88179_resume(struct usb_interface *intf) return usbnet_resume(intf); } +static void ax88179_disconnect(struct usb_interface *intf) +{ + struct usbnet *dev = usb_get_intfdata(intf); + struct ax88179_data *ax179_data; + + if (!dev) + return; + + ax179_data = dev->driver_priv; + ax179_data->disconnecting = 1; + + usbnet_disconnect(intf); +} + static void ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) { @@ -1906,7 +1923,7 @@ static struct usb_driver ax88179_178a_driver = { .suspend = ax88179_suspend, .resume = ax88179_resume, .reset_resume = ax88179_resume, - .disconnect = usbnet_disconnect, + .disconnect = ax88179_disconnect, .supports_autosuspend = 1, .disable_hub_initiated_lpm = 1, };

10 months

1
0
0 0

FAILED: patch "[PATCH] usb: fotg210-hcd: delete an incorrect bounds test" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.14.y git checkout FETCH_HEAD git cherry-pick -x 7fbcd195e2b8cc952e4aeaeb50867b798040314c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122836-upper-afar-d2ef@gregkh' --subject-prefix 'PATCH 4.14.y' HEAD^.. Possible dependencies: 7fbcd195e2b8 ("usb: fotg210-hcd: delete an incorrect bounds test") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7fbcd195e2b8cc952e4aeaeb50867b798040314c Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Wed, 13 Dec 2023 16:22:43 +0300 Subject: [PATCH] usb: fotg210-hcd: delete an incorrect bounds test Here "temp" is the number of characters that we have written and "size" is the size of the buffer. The intent was clearly to say that if we have written to the end of the buffer then stop. However, for that to work the comparison should have been done on the original "size" value instead of the "size -= temp" value. Not only will that not trigger when we want to, but there is a small chance that it will trigger incorrectly before we want it to and we break from the loop slightly earlier than intended. This code was recently changed from using snprintf() to scnprintf(). With snprintf() we likely would have continued looping and passed a negative size parameter to snprintf(). This would have triggered an annoying WARN(). Now that we have converted to scnprintf() "size" will never drop below 1 and there is no real need for this test. We could change the condition to "if (temp <= 1) goto done;" but just deleting the test is cleanest. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Cc: stable <stable(a)kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Reviewed-by: Lee Jones <lee(a)kernel.org> Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/fotg210/fotg210-hcd.c b/drivers/usb/fotg210/fotg210-hcd.c index 929106c16b29..7bf810a0c98a 100644 --- a/drivers/usb/fotg210/fotg210-hcd.c +++ b/drivers/usb/fotg210/fotg210-hcd.c @@ -428,8 +428,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, temp = size; size -= temp; next += temp; - if (temp == size) - goto done; } temp = snprintf(next, size, "\n"); @@ -439,7 +437,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, size -= temp; next += temp; -done: *sizep = size; *nextp = next; }

10 months

1
0
0 0

FAILED: patch "[PATCH] usb: fotg210-hcd: delete an incorrect bounds test" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.19.y git checkout FETCH_HEAD git cherry-pick -x 7fbcd195e2b8cc952e4aeaeb50867b798040314c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122834-grievous-icy-cff7@gregkh' --subject-prefix 'PATCH 4.19.y' HEAD^.. Possible dependencies: 7fbcd195e2b8 ("usb: fotg210-hcd: delete an incorrect bounds test") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7fbcd195e2b8cc952e4aeaeb50867b798040314c Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Wed, 13 Dec 2023 16:22:43 +0300 Subject: [PATCH] usb: fotg210-hcd: delete an incorrect bounds test Here "temp" is the number of characters that we have written and "size" is the size of the buffer. The intent was clearly to say that if we have written to the end of the buffer then stop. However, for that to work the comparison should have been done on the original "size" value instead of the "size -= temp" value. Not only will that not trigger when we want to, but there is a small chance that it will trigger incorrectly before we want it to and we break from the loop slightly earlier than intended. This code was recently changed from using snprintf() to scnprintf(). With snprintf() we likely would have continued looping and passed a negative size parameter to snprintf(). This would have triggered an annoying WARN(). Now that we have converted to scnprintf() "size" will never drop below 1 and there is no real need for this test. We could change the condition to "if (temp <= 1) goto done;" but just deleting the test is cleanest. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Cc: stable <stable(a)kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Reviewed-by: Lee Jones <lee(a)kernel.org> Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/fotg210/fotg210-hcd.c b/drivers/usb/fotg210/fotg210-hcd.c index 929106c16b29..7bf810a0c98a 100644 --- a/drivers/usb/fotg210/fotg210-hcd.c +++ b/drivers/usb/fotg210/fotg210-hcd.c @@ -428,8 +428,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, temp = size; size -= temp; next += temp; - if (temp == size) - goto done; } temp = snprintf(next, size, "\n"); @@ -439,7 +437,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, size -= temp; next += temp; -done: *sizep = size; *nextp = next; }

10 months

1
0
0 0

FAILED: patch "[PATCH] usb: fotg210-hcd: delete an incorrect bounds test" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 7fbcd195e2b8cc952e4aeaeb50867b798040314c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122833-thickness-pulp-2179@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: 7fbcd195e2b8 ("usb: fotg210-hcd: delete an incorrect bounds test") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7fbcd195e2b8cc952e4aeaeb50867b798040314c Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Wed, 13 Dec 2023 16:22:43 +0300 Subject: [PATCH] usb: fotg210-hcd: delete an incorrect bounds test Here "temp" is the number of characters that we have written and "size" is the size of the buffer. The intent was clearly to say that if we have written to the end of the buffer then stop. However, for that to work the comparison should have been done on the original "size" value instead of the "size -= temp" value. Not only will that not trigger when we want to, but there is a small chance that it will trigger incorrectly before we want it to and we break from the loop slightly earlier than intended. This code was recently changed from using snprintf() to scnprintf(). With snprintf() we likely would have continued looping and passed a negative size parameter to snprintf(). This would have triggered an annoying WARN(). Now that we have converted to scnprintf() "size" will never drop below 1 and there is no real need for this test. We could change the condition to "if (temp <= 1) goto done;" but just deleting the test is cleanest. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Cc: stable <stable(a)kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Reviewed-by: Lee Jones <lee(a)kernel.org> Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/fotg210/fotg210-hcd.c b/drivers/usb/fotg210/fotg210-hcd.c index 929106c16b29..7bf810a0c98a 100644 --- a/drivers/usb/fotg210/fotg210-hcd.c +++ b/drivers/usb/fotg210/fotg210-hcd.c @@ -428,8 +428,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, temp = size; size -= temp; next += temp; - if (temp == size) - goto done; } temp = snprintf(next, size, "\n"); @@ -439,7 +437,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, size -= temp; next += temp; -done: *sizep = size; *nextp = next; }

10 months

1
0
0 0

FAILED: patch "[PATCH] usb: fotg210-hcd: delete an incorrect bounds test" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 7fbcd195e2b8cc952e4aeaeb50867b798040314c # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2023122831-computing-glucose-7f85@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: 7fbcd195e2b8 ("usb: fotg210-hcd: delete an incorrect bounds test") thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 7fbcd195e2b8cc952e4aeaeb50867b798040314c Mon Sep 17 00:00:00 2001 From: Dan Carpenter <dan.carpenter(a)linaro.org> Date: Wed, 13 Dec 2023 16:22:43 +0300 Subject: [PATCH] usb: fotg210-hcd: delete an incorrect bounds test Here "temp" is the number of characters that we have written and "size" is the size of the buffer. The intent was clearly to say that if we have written to the end of the buffer then stop. However, for that to work the comparison should have been done on the original "size" value instead of the "size -= temp" value. Not only will that not trigger when we want to, but there is a small chance that it will trigger incorrectly before we want it to and we break from the loop slightly earlier than intended. This code was recently changed from using snprintf() to scnprintf(). With snprintf() we likely would have continued looping and passed a negative size parameter to snprintf(). This would have triggered an annoying WARN(). Now that we have converted to scnprintf() "size" will never drop below 1 and there is no real need for this test. We could change the condition to "if (temp <= 1) goto done;" but just deleting the test is cleanest. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Cc: stable <stable(a)kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Reviewed-by: Lee Jones <lee(a)kernel.org> Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/fotg210/fotg210-hcd.c b/drivers/usb/fotg210/fotg210-hcd.c index 929106c16b29..7bf810a0c98a 100644 --- a/drivers/usb/fotg210/fotg210-hcd.c +++ b/drivers/usb/fotg210/fotg210-hcd.c @@ -428,8 +428,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, temp = size; size -= temp; next += temp; - if (temp == size) - goto done; } temp = snprintf(next, size, "\n"); @@ -439,7 +437,6 @@ static void qh_lines(struct fotg210_hcd *fotg210, struct fotg210_qh *qh, size -= temp; next += temp; -done: *sizep = size; *nextp = next; }

10 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2023