January 2022 - Linux-stable-mirror

FAILED: patch "[PATCH] serial: stm32: prevent TDR register overwrite when sending" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001 From: Valentin Caron <valentin.caron(a)foss.st.com> Date: Tue, 11 Jan 2022 17:44:40 +0100 Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending x_char When sending x_char in stm32_usart_transmit_chars(), driver can overwrite the value of TDR register by the value of x_char. If this happens, the previous value that was present in TDR register will not be sent through uart. This code checks if the previous value in TDR register is sent before writing the x_char value into register. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com> Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 1f89ab0e49ac..c1b8828451c8 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; struct circ_buf *xmit = &port->state->xmit; + u32 isr; + int ret; if (port->x_char) { if (stm32_usart_tx_dma_started(stm32_port) && stm32_usart_tx_dma_enabled(stm32_port)) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + + /* Check that TDR is empty before filling FIFO */ + ret = + readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, + isr, + (isr & USART_SR_TXE), + 10, 1000); + if (ret) + dev_warn(port->dev, "1 character may be erased\n"); + writel_relaxed(port->x_char, port->membase + ofs->tdr); port->x_char = 0; port->icount.tx++;

2 years, 11 months

1
0
0 0

FAILED: patch "[PATCH] serial: stm32: prevent TDR register overwrite when sending" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001 From: Valentin Caron <valentin.caron(a)foss.st.com> Date: Tue, 11 Jan 2022 17:44:40 +0100 Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending x_char When sending x_char in stm32_usart_transmit_chars(), driver can overwrite the value of TDR register by the value of x_char. If this happens, the previous value that was present in TDR register will not be sent through uart. This code checks if the previous value in TDR register is sent before writing the x_char value into register. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com> Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 1f89ab0e49ac..c1b8828451c8 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; struct circ_buf *xmit = &port->state->xmit; + u32 isr; + int ret; if (port->x_char) { if (stm32_usart_tx_dma_started(stm32_port) && stm32_usart_tx_dma_enabled(stm32_port)) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + + /* Check that TDR is empty before filling FIFO */ + ret = + readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, + isr, + (isr & USART_SR_TXE), + 10, 1000); + if (ret) + dev_warn(port->dev, "1 character may be erased\n"); + writel_relaxed(port->x_char, port->membase + ofs->tdr); port->x_char = 0; port->icount.tx++;

2 years, 11 months

1
0
0 0

FAILED: patch "[PATCH] serial: stm32: prevent TDR register overwrite when sending" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001 From: Valentin Caron <valentin.caron(a)foss.st.com> Date: Tue, 11 Jan 2022 17:44:40 +0100 Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending x_char When sending x_char in stm32_usart_transmit_chars(), driver can overwrite the value of TDR register by the value of x_char. If this happens, the previous value that was present in TDR register will not be sent through uart. This code checks if the previous value in TDR register is sent before writing the x_char value into register. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com> Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 1f89ab0e49ac..c1b8828451c8 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; struct circ_buf *xmit = &port->state->xmit; + u32 isr; + int ret; if (port->x_char) { if (stm32_usart_tx_dma_started(stm32_port) && stm32_usart_tx_dma_enabled(stm32_port)) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + + /* Check that TDR is empty before filling FIFO */ + ret = + readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, + isr, + (isr & USART_SR_TXE), + 10, 1000); + if (ret) + dev_warn(port->dev, "1 character may be erased\n"); + writel_relaxed(port->x_char, port->membase + ofs->tdr); port->x_char = 0; port->icount.tx++;

2 years, 11 months

1
0
0 0

FAILED: patch "[PATCH] serial: stm32: prevent TDR register overwrite when sending" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001 From: Valentin Caron <valentin.caron(a)foss.st.com> Date: Tue, 11 Jan 2022 17:44:40 +0100 Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending x_char When sending x_char in stm32_usart_transmit_chars(), driver can overwrite the value of TDR register by the value of x_char. If this happens, the previous value that was present in TDR register will not be sent through uart. This code checks if the previous value in TDR register is sent before writing the x_char value into register. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com> Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 1f89ab0e49ac..c1b8828451c8 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; struct circ_buf *xmit = &port->state->xmit; + u32 isr; + int ret; if (port->x_char) { if (stm32_usart_tx_dma_started(stm32_port) && stm32_usart_tx_dma_enabled(stm32_port)) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + + /* Check that TDR is empty before filling FIFO */ + ret = + readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, + isr, + (isr & USART_SR_TXE), + 10, 1000); + if (ret) + dev_warn(port->dev, "1 character may be erased\n"); + writel_relaxed(port->x_char, port->membase + ofs->tdr); port->x_char = 0; port->icount.tx++;

2 years, 11 months

1
0
0 0

FAILED: patch "[PATCH] i40e: fix unsigned stat widths" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 3b8428b84539c78fdc8006c17ebd25afd4722d51 Mon Sep 17 00:00:00 2001 From: Joe Damato <jdamato(a)fastly.com> Date: Wed, 8 Dec 2021 17:56:33 -0800 Subject: [PATCH] i40e: fix unsigned stat widths Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match the width of the stats counters in struct i40e_rx_queue_stats. Update debugfs code to use the correct format specifier for u64. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Joe Damato <jdamato(a)fastly.com> Reported-by: kernel test robot <lkp(a)intel.com> Tested-by: Gurucharan G <gurucharanx.g(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index c8cfe62d5e05..2e02cc68cd3f 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -847,12 +847,12 @@ struct i40e_vsi { struct rtnl_link_stats64 net_stats_offsets; struct i40e_eth_stats eth_stats; struct i40e_eth_stats eth_stats_offsets; - u32 tx_restart; - u32 tx_busy; + u64 tx_restart; + u64 tx_busy; u64 tx_linearize; u64 tx_force_wb; - u32 rx_buf_failed; - u32 rx_page_failed; + u64 rx_buf_failed; + u64 rx_page_failed; /* These are containers of ring pointers, allocated at run-time */ struct i40e_ring **rx_rings; diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c index 2c1b1da1220e..1e57cc8c47d7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c +++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c @@ -240,7 +240,7 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid) (unsigned long int)vsi->net_stats_offsets.rx_compressed, (unsigned long int)vsi->net_stats_offsets.tx_compressed); dev_info(&pf->pdev->dev, - " tx_restart = %d, tx_busy = %d, rx_buf_failed = %d, rx_page_failed = %d\n", + " tx_restart = %llu, tx_busy = %llu, rx_buf_failed = %llu, rx_page_failed = %llu\n", vsi->tx_restart, vsi->tx_busy, vsi->rx_buf_failed, vsi->rx_page_failed); rcu_read_lock(); diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 9b65cb50282c..f70c478dafdb 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -778,9 +778,9 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi) struct rtnl_link_stats64 *ns; /* netdev stats */ struct i40e_eth_stats *oes; struct i40e_eth_stats *es; /* device's eth stats */ - u32 tx_restart, tx_busy; + u64 tx_restart, tx_busy; struct i40e_ring *p; - u32 rx_page, rx_buf; + u64 rx_page, rx_buf; u64 bytes, packets; unsigned int start; u64 tx_linearize;

2 years, 11 months

1
0
0 0

FAILED: patch "[PATCH] i40e: fix unsigned stat widths" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 3b8428b84539c78fdc8006c17ebd25afd4722d51 Mon Sep 17 00:00:00 2001 From: Joe Damato <jdamato(a)fastly.com> Date: Wed, 8 Dec 2021 17:56:33 -0800 Subject: [PATCH] i40e: fix unsigned stat widths Change i40e_update_vsi_stats and struct i40e_vsi to use u64 fields to match the width of the stats counters in struct i40e_rx_queue_stats. Update debugfs code to use the correct format specifier for u64. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Joe Damato <jdamato(a)fastly.com> Reported-by: kernel test robot <lkp(a)intel.com> Tested-by: Gurucharan G <gurucharanx.g(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index c8cfe62d5e05..2e02cc68cd3f 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -847,12 +847,12 @@ struct i40e_vsi { struct rtnl_link_stats64 net_stats_offsets; struct i40e_eth_stats eth_stats; struct i40e_eth_stats eth_stats_offsets; - u32 tx_restart; - u32 tx_busy; + u64 tx_restart; + u64 tx_busy; u64 tx_linearize; u64 tx_force_wb; - u32 rx_buf_failed; - u32 rx_page_failed; + u64 rx_buf_failed; + u64 rx_page_failed; /* These are containers of ring pointers, allocated at run-time */ struct i40e_ring **rx_rings; diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c index 2c1b1da1220e..1e57cc8c47d7 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c +++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c @@ -240,7 +240,7 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid) (unsigned long int)vsi->net_stats_offsets.rx_compressed, (unsigned long int)vsi->net_stats_offsets.tx_compressed); dev_info(&pf->pdev->dev, - " tx_restart = %d, tx_busy = %d, rx_buf_failed = %d, rx_page_failed = %d\n", + " tx_restart = %llu, tx_busy = %llu, rx_buf_failed = %llu, rx_page_failed = %llu\n", vsi->tx_restart, vsi->tx_busy, vsi->rx_buf_failed, vsi->rx_page_failed); rcu_read_lock(); diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 9b65cb50282c..f70c478dafdb 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -778,9 +778,9 @@ static void i40e_update_vsi_stats(struct i40e_vsi *vsi) struct rtnl_link_stats64 *ns; /* netdev stats */ struct i40e_eth_stats *oes; struct i40e_eth_stats *es; /* device's eth stats */ - u32 tx_restart, tx_busy; + u64 tx_restart, tx_busy; struct i40e_ring *p; - u32 rx_page, rx_buf; + u64 rx_page, rx_buf; u64 bytes, packets; unsigned int start; u64 tx_linearize;

2 years, 11 months

1
0
0 0

FAILED: patch "[PATCH] i40e: Fix for failed to init adminq while VF reset" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0f344c8129a5337dae50e31b817dd50a60ff238c Mon Sep 17 00:00:00 2001 From: Karen Sornek <karen.sornek(a)intel.com> Date: Thu, 2 Dec 2021 12:52:01 +0100 Subject: [PATCH] i40e: Fix for failed to init adminq while VF reset Fix for failed to init adminq: -53 while VF is resetting via MAC address changing procedure. Added sync module to avoid reading deadbeef value in reinit adminq during software reset. Without this patch it is possible to trigger VF reset procedure during reinit adminq. This resulted in an incorrect reading of value from the AQP registers and generated the -53 error. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek(a)intel.com> Signed-off-by: Karen Sornek <karen.sornek(a)intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 8d0588a27a05..1908eed4fa5e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -413,6 +413,9 @@ #define I40E_VFINT_DYN_CTLN(_INTVF) (0x00024800 + ((_INTVF) * 4)) /* _i=0...511 */ /* Reset: VFR */ #define I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT 1 #define I40E_VFINT_DYN_CTLN_CLEARPBA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT) +#define I40E_VFINT_ICR0_ADMINQ_SHIFT 30 +#define I40E_VFINT_ICR0_ADMINQ_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ADMINQ_SHIFT) +#define I40E_VFINT_ICR0_ENA(_VF) (0x0002C000 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL(_VF) (0x0002B800 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL_MSIX_INDX_SHIFT 0 #define I40E_VPINT_AEQCTL_ITR_INDX_SHIFT 11 diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 7dd2a2bab339..dfdb6e786461 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1376,6 +1376,32 @@ static i40e_status i40e_config_vf_promiscuous_mode(struct i40e_vf *vf, return aq_ret; } +/** + * i40e_sync_vfr_reset + * @hw: pointer to hw struct + * @vf_id: VF identifier + * + * Before trigger hardware reset, we need to know if no other process has + * reserved the hardware for any reset operations. This check is done by + * examining the status of the RSTAT1 register used to signal the reset. + **/ +static int i40e_sync_vfr_reset(struct i40e_hw *hw, int vf_id) +{ + u32 reg; + int i; + + for (i = 0; i < I40E_VFR_WAIT_COUNT; i++) { + reg = rd32(hw, I40E_VFINT_ICR0_ENA(vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (reg) + return 0; + + usleep_range(100, 200); + } + + return -EAGAIN; +} + /** * i40e_trigger_vf_reset * @vf: pointer to the VF structure @@ -1390,9 +1416,11 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) struct i40e_pf *pf = vf->pf; struct i40e_hw *hw = &pf->hw; u32 reg, reg_idx, bit_idx; + bool vf_active; + u32 radq; /* warn the VF */ - clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); + vf_active = test_and_clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); /* Disable VF's configuration API during reset. The flag is re-enabled * in i40e_alloc_vf_res(), when it's safe again to access VF's VSI. @@ -1406,7 +1434,19 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) * just need to clean up, so don't hit the VFRTRIG register. */ if (!flr) { - /* reset VF using VPGEN_VFRTRIG reg */ + /* Sync VFR reset before trigger next one */ + radq = rd32(hw, I40E_VFINT_ICR0_ENA(vf->vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (vf_active && !radq) + /* waiting for finish reset by virtual driver */ + if (i40e_sync_vfr_reset(hw, vf->vf_id)) + dev_info(&pf->pdev->dev, + "Reset VF %d never finished\n", + vf->vf_id); + + /* Reset VF using VPGEN_VFRTRIG reg. It is also setting + * in progress state in rstat1 register. + */ reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id)); reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK; wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg); diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h index 49575a640a84..03c42fd0fea1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h @@ -19,6 +19,7 @@ #define I40E_MAX_VF_PROMISC_FLAGS 3 #define I40E_VF_STATE_WAIT_COUNT 20 +#define I40E_VFR_WAIT_COUNT 100 /* Various queue ctrls */ enum i40e_queue_ctrl {

2 years, 11 months

1
0
0 0

FAILED: patch "[PATCH] i40e: Fix for failed to init adminq while VF reset" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0f344c8129a5337dae50e31b817dd50a60ff238c Mon Sep 17 00:00:00 2001 From: Karen Sornek <karen.sornek(a)intel.com> Date: Thu, 2 Dec 2021 12:52:01 +0100 Subject: [PATCH] i40e: Fix for failed to init adminq while VF reset Fix for failed to init adminq: -53 while VF is resetting via MAC address changing procedure. Added sync module to avoid reading deadbeef value in reinit adminq during software reset. Without this patch it is possible to trigger VF reset procedure during reinit adminq. This resulted in an incorrect reading of value from the AQP registers and generated the -53 error. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek(a)intel.com> Signed-off-by: Karen Sornek <karen.sornek(a)intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 8d0588a27a05..1908eed4fa5e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -413,6 +413,9 @@ #define I40E_VFINT_DYN_CTLN(_INTVF) (0x00024800 + ((_INTVF) * 4)) /* _i=0...511 */ /* Reset: VFR */ #define I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT 1 #define I40E_VFINT_DYN_CTLN_CLEARPBA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT) +#define I40E_VFINT_ICR0_ADMINQ_SHIFT 30 +#define I40E_VFINT_ICR0_ADMINQ_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ADMINQ_SHIFT) +#define I40E_VFINT_ICR0_ENA(_VF) (0x0002C000 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL(_VF) (0x0002B800 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL_MSIX_INDX_SHIFT 0 #define I40E_VPINT_AEQCTL_ITR_INDX_SHIFT 11 diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 7dd2a2bab339..dfdb6e786461 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1376,6 +1376,32 @@ static i40e_status i40e_config_vf_promiscuous_mode(struct i40e_vf *vf, return aq_ret; } +/** + * i40e_sync_vfr_reset + * @hw: pointer to hw struct + * @vf_id: VF identifier + * + * Before trigger hardware reset, we need to know if no other process has + * reserved the hardware for any reset operations. This check is done by + * examining the status of the RSTAT1 register used to signal the reset. + **/ +static int i40e_sync_vfr_reset(struct i40e_hw *hw, int vf_id) +{ + u32 reg; + int i; + + for (i = 0; i < I40E_VFR_WAIT_COUNT; i++) { + reg = rd32(hw, I40E_VFINT_ICR0_ENA(vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (reg) + return 0; + + usleep_range(100, 200); + } + + return -EAGAIN; +} + /** * i40e_trigger_vf_reset * @vf: pointer to the VF structure @@ -1390,9 +1416,11 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) struct i40e_pf *pf = vf->pf; struct i40e_hw *hw = &pf->hw; u32 reg, reg_idx, bit_idx; + bool vf_active; + u32 radq; /* warn the VF */ - clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); + vf_active = test_and_clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); /* Disable VF's configuration API during reset. The flag is re-enabled * in i40e_alloc_vf_res(), when it's safe again to access VF's VSI. @@ -1406,7 +1434,19 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) * just need to clean up, so don't hit the VFRTRIG register. */ if (!flr) { - /* reset VF using VPGEN_VFRTRIG reg */ + /* Sync VFR reset before trigger next one */ + radq = rd32(hw, I40E_VFINT_ICR0_ENA(vf->vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (vf_active && !radq) + /* waiting for finish reset by virtual driver */ + if (i40e_sync_vfr_reset(hw, vf->vf_id)) + dev_info(&pf->pdev->dev, + "Reset VF %d never finished\n", + vf->vf_id); + + /* Reset VF using VPGEN_VFRTRIG reg. It is also setting + * in progress state in rstat1 register. + */ reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id)); reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK; wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg); diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h index 49575a640a84..03c42fd0fea1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h @@ -19,6 +19,7 @@ #define I40E_MAX_VF_PROMISC_FLAGS 3 #define I40E_VF_STATE_WAIT_COUNT 20 +#define I40E_VFR_WAIT_COUNT 100 /* Various queue ctrls */ enum i40e_queue_ctrl {

2 years, 11 months

1
0
0 0

FAILED: patch "[PATCH] i40e: Fix for failed to init adminq while VF reset" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0f344c8129a5337dae50e31b817dd50a60ff238c Mon Sep 17 00:00:00 2001 From: Karen Sornek <karen.sornek(a)intel.com> Date: Thu, 2 Dec 2021 12:52:01 +0100 Subject: [PATCH] i40e: Fix for failed to init adminq while VF reset Fix for failed to init adminq: -53 while VF is resetting via MAC address changing procedure. Added sync module to avoid reading deadbeef value in reinit adminq during software reset. Without this patch it is possible to trigger VF reset procedure during reinit adminq. This resulted in an incorrect reading of value from the AQP registers and generated the -53 error. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek(a)intel.com> Signed-off-by: Karen Sornek <karen.sornek(a)intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 8d0588a27a05..1908eed4fa5e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -413,6 +413,9 @@ #define I40E_VFINT_DYN_CTLN(_INTVF) (0x00024800 + ((_INTVF) * 4)) /* _i=0...511 */ /* Reset: VFR */ #define I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT 1 #define I40E_VFINT_DYN_CTLN_CLEARPBA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT) +#define I40E_VFINT_ICR0_ADMINQ_SHIFT 30 +#define I40E_VFINT_ICR0_ADMINQ_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ADMINQ_SHIFT) +#define I40E_VFINT_ICR0_ENA(_VF) (0x0002C000 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL(_VF) (0x0002B800 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL_MSIX_INDX_SHIFT 0 #define I40E_VPINT_AEQCTL_ITR_INDX_SHIFT 11 diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 7dd2a2bab339..dfdb6e786461 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1376,6 +1376,32 @@ static i40e_status i40e_config_vf_promiscuous_mode(struct i40e_vf *vf, return aq_ret; } +/** + * i40e_sync_vfr_reset + * @hw: pointer to hw struct + * @vf_id: VF identifier + * + * Before trigger hardware reset, we need to know if no other process has + * reserved the hardware for any reset operations. This check is done by + * examining the status of the RSTAT1 register used to signal the reset. + **/ +static int i40e_sync_vfr_reset(struct i40e_hw *hw, int vf_id) +{ + u32 reg; + int i; + + for (i = 0; i < I40E_VFR_WAIT_COUNT; i++) { + reg = rd32(hw, I40E_VFINT_ICR0_ENA(vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (reg) + return 0; + + usleep_range(100, 200); + } + + return -EAGAIN; +} + /** * i40e_trigger_vf_reset * @vf: pointer to the VF structure @@ -1390,9 +1416,11 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) struct i40e_pf *pf = vf->pf; struct i40e_hw *hw = &pf->hw; u32 reg, reg_idx, bit_idx; + bool vf_active; + u32 radq; /* warn the VF */ - clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); + vf_active = test_and_clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); /* Disable VF's configuration API during reset. The flag is re-enabled * in i40e_alloc_vf_res(), when it's safe again to access VF's VSI. @@ -1406,7 +1434,19 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) * just need to clean up, so don't hit the VFRTRIG register. */ if (!flr) { - /* reset VF using VPGEN_VFRTRIG reg */ + /* Sync VFR reset before trigger next one */ + radq = rd32(hw, I40E_VFINT_ICR0_ENA(vf->vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (vf_active && !radq) + /* waiting for finish reset by virtual driver */ + if (i40e_sync_vfr_reset(hw, vf->vf_id)) + dev_info(&pf->pdev->dev, + "Reset VF %d never finished\n", + vf->vf_id); + + /* Reset VF using VPGEN_VFRTRIG reg. It is also setting + * in progress state in rstat1 register. + */ reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id)); reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK; wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg); diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h index 49575a640a84..03c42fd0fea1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h @@ -19,6 +19,7 @@ #define I40E_MAX_VF_PROMISC_FLAGS 3 #define I40E_VF_STATE_WAIT_COUNT 20 +#define I40E_VFR_WAIT_COUNT 100 /* Various queue ctrls */ enum i40e_queue_ctrl {

2 years, 11 months

1
0
0 0

FAILED: patch "[PATCH] i40e: Fix for failed to init adminq while VF reset" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0f344c8129a5337dae50e31b817dd50a60ff238c Mon Sep 17 00:00:00 2001 From: Karen Sornek <karen.sornek(a)intel.com> Date: Thu, 2 Dec 2021 12:52:01 +0100 Subject: [PATCH] i40e: Fix for failed to init adminq while VF reset Fix for failed to init adminq: -53 while VF is resetting via MAC address changing procedure. Added sync module to avoid reading deadbeef value in reinit adminq during software reset. Without this patch it is possible to trigger VF reset procedure during reinit adminq. This resulted in an incorrect reading of value from the AQP registers and generated the -53 error. Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek(a)intel.com> Signed-off-by: Karen Sornek <karen.sornek(a)intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski(a)intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> diff --git a/drivers/net/ethernet/intel/i40e/i40e_register.h b/drivers/net/ethernet/intel/i40e/i40e_register.h index 8d0588a27a05..1908eed4fa5e 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_register.h +++ b/drivers/net/ethernet/intel/i40e/i40e_register.h @@ -413,6 +413,9 @@ #define I40E_VFINT_DYN_CTLN(_INTVF) (0x00024800 + ((_INTVF) * 4)) /* _i=0...511 */ /* Reset: VFR */ #define I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT 1 #define I40E_VFINT_DYN_CTLN_CLEARPBA_MASK I40E_MASK(0x1, I40E_VFINT_DYN_CTLN_CLEARPBA_SHIFT) +#define I40E_VFINT_ICR0_ADMINQ_SHIFT 30 +#define I40E_VFINT_ICR0_ADMINQ_MASK I40E_MASK(0x1, I40E_VFINT_ICR0_ADMINQ_SHIFT) +#define I40E_VFINT_ICR0_ENA(_VF) (0x0002C000 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL(_VF) (0x0002B800 + ((_VF) * 4)) /* _i=0...127 */ /* Reset: CORER */ #define I40E_VPINT_AEQCTL_MSIX_INDX_SHIFT 0 #define I40E_VPINT_AEQCTL_ITR_INDX_SHIFT 11 diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c index 7dd2a2bab339..dfdb6e786461 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c @@ -1376,6 +1376,32 @@ static i40e_status i40e_config_vf_promiscuous_mode(struct i40e_vf *vf, return aq_ret; } +/** + * i40e_sync_vfr_reset + * @hw: pointer to hw struct + * @vf_id: VF identifier + * + * Before trigger hardware reset, we need to know if no other process has + * reserved the hardware for any reset operations. This check is done by + * examining the status of the RSTAT1 register used to signal the reset. + **/ +static int i40e_sync_vfr_reset(struct i40e_hw *hw, int vf_id) +{ + u32 reg; + int i; + + for (i = 0; i < I40E_VFR_WAIT_COUNT; i++) { + reg = rd32(hw, I40E_VFINT_ICR0_ENA(vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (reg) + return 0; + + usleep_range(100, 200); + } + + return -EAGAIN; +} + /** * i40e_trigger_vf_reset * @vf: pointer to the VF structure @@ -1390,9 +1416,11 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) struct i40e_pf *pf = vf->pf; struct i40e_hw *hw = &pf->hw; u32 reg, reg_idx, bit_idx; + bool vf_active; + u32 radq; /* warn the VF */ - clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); + vf_active = test_and_clear_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states); /* Disable VF's configuration API during reset. The flag is re-enabled * in i40e_alloc_vf_res(), when it's safe again to access VF's VSI. @@ -1406,7 +1434,19 @@ static void i40e_trigger_vf_reset(struct i40e_vf *vf, bool flr) * just need to clean up, so don't hit the VFRTRIG register. */ if (!flr) { - /* reset VF using VPGEN_VFRTRIG reg */ + /* Sync VFR reset before trigger next one */ + radq = rd32(hw, I40E_VFINT_ICR0_ENA(vf->vf_id)) & + I40E_VFINT_ICR0_ADMINQ_MASK; + if (vf_active && !radq) + /* waiting for finish reset by virtual driver */ + if (i40e_sync_vfr_reset(hw, vf->vf_id)) + dev_info(&pf->pdev->dev, + "Reset VF %d never finished\n", + vf->vf_id); + + /* Reset VF using VPGEN_VFRTRIG reg. It is also setting + * in progress state in rstat1 register. + */ reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id)); reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK; wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg); diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h index 49575a640a84..03c42fd0fea1 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h +++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h @@ -19,6 +19,7 @@ #define I40E_MAX_VF_PROMISC_FLAGS 3 #define I40E_VF_STATE_WAIT_COUNT 20 +#define I40E_VFR_WAIT_COUNT 100 /* Various queue ctrls */ enum i40e_queue_ctrl {

2 years, 11 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2022