The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1751fc1db36f6f411709e143d5393f92d12137a9 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <trond.myklebust(a)hammerspace.com>
Date: Thu, 6 Jan 2022 18:24:03 -0500
Subject: [PATCH] NFSv4: nfs_atomic_open() can race when looking up a
non-regular file
If the file type changes back to being a regular file on the server
between the failed OPEN and our LOOKUP, then we need to re-run the OPEN.
Fixes: 0dd2b474d0b6 ("nfs: implement i_op->atomic_open()")
Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com>
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 408c3bb549b1..5df75ed09268 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1999,12 +1999,17 @@ int nfs_atomic_open(struct inode *dir, struct dentry *dentry,
if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
!S_ISDIR(inode->i_mode))
res = ERR_PTR(-ENOTDIR);
+ else if (inode && S_ISREG(inode->i_mode))
+ res = ERR_PTR(-EOPENSTALE);
} else if (!IS_ERR(res)) {
inode = d_inode(res);
if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
!S_ISDIR(inode->i_mode)) {
dput(res);
res = ERR_PTR(-ENOTDIR);
+ } else if (inode && S_ISREG(inode->i_mode)) {
+ dput(res);
+ res = ERR_PTR(-EOPENSTALE);
}
}
if (switched) {
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From ac795161c93699d600db16c1a8cc23a65a1eceaf Mon Sep 17 00:00:00 2001
From: Trond Myklebust <trond.myklebust(a)hammerspace.com>
Date: Thu, 6 Jan 2022 18:24:02 -0500
Subject: [PATCH] NFSv4: Handle case where the lookup of a directory fails
If the application sets the O_DIRECTORY flag, and tries to open a
regular file, nfs_atomic_open() will punt to doing a regular lookup.
If the server then returns a regular file, we will happily return a
file descriptor with uninitialised open state.
The fix is to return the expected ENOTDIR error in these cases.
Reported-by: Lyu Tao <tao.lyu(a)epfl.ch>
Fixes: 0dd2b474d0b6 ("nfs: implement i_op->atomic_open()")
Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com>
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 2884138848f4..408c3bb549b1 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1994,6 +1994,19 @@ int nfs_atomic_open(struct inode *dir, struct dentry *dentry,
no_open:
res = nfs_lookup(dir, dentry, lookup_flags);
+ if (!res) {
+ inode = d_inode(dentry);
+ if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
+ !S_ISDIR(inode->i_mode))
+ res = ERR_PTR(-ENOTDIR);
+ } else if (!IS_ERR(res)) {
+ inode = d_inode(res);
+ if ((lookup_flags & LOOKUP_DIRECTORY) && inode &&
+ !S_ISDIR(inode->i_mode)) {
+ dput(res);
+ res = ERR_PTR(-ENOTDIR);
+ }
+ }
if (switched) {
d_lookup_done(dentry);
if (!res)
arch/arm/mach-ep93xx/clock.c:154:2: warning: Use of memory after it is freed [clang-analyzer-unix.Malloc]
arch/arm/mach-ep93xx/clock.c:151:2: note: Taking true branch
if (IS_ERR(clk))
^
arch/arm/mach-ep93xx/clock.c:152:3: note: Memory is released
kfree(psc);
^~~~~~~~~~
arch/arm/mach-ep93xx/clock.c:154:2: note: Use of memory after it is freed
return &psc->hw;
^ ~~~~~~~~
Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/B5YCO2N…
Reported-by: kernel test robot <lkp(a)intel.com>
Fixes: 9645ccc7bd7a ("ep93xx: clock: convert in-place to COMMON_CLK")
Cc: stable(a)vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin(a)gmail.com>
---
Changelog:
v2:
- Thanks to Nick for the hint to use ERR_CAST()
arch/arm/mach-ep93xx/clock.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index cc75087134d3..4aee14f18123 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -148,8 +148,10 @@ static struct clk_hw *ep93xx_clk_register_gate(const char *name,
psc->lock = &clk_lock;
clk = clk_register(NULL, &psc->hw);
- if (IS_ERR(clk))
+ if (IS_ERR(clk)) {
kfree(psc);
+ return ERR_CAST(clk);
+ }
return &psc->hw;
}
--
2.34.1
The patch below does not apply to the 5.16-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001
From: Valentin Caron <valentin.caron(a)foss.st.com>
Date: Tue, 11 Jan 2022 17:44:40 +0100
Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending
x_char
When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.
This code checks if the previous value in TDR register is sent before
writing the x_char value into register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
+ u32 isr;
+ int ret;
if (port->x_char) {
if (stm32_usart_tx_dma_started(stm32_port) &&
stm32_usart_tx_dma_enabled(stm32_port))
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+ /* Check that TDR is empty before filling FIFO */
+ ret =
+ readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TXE),
+ 10, 1000);
+ if (ret)
+ dev_warn(port->dev, "1 character may be erased\n");
+
writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001
From: Valentin Caron <valentin.caron(a)foss.st.com>
Date: Tue, 11 Jan 2022 17:44:40 +0100
Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending
x_char
When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.
This code checks if the previous value in TDR register is sent before
writing the x_char value into register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
+ u32 isr;
+ int ret;
if (port->x_char) {
if (stm32_usart_tx_dma_started(stm32_port) &&
stm32_usart_tx_dma_enabled(stm32_port))
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+ /* Check that TDR is empty before filling FIFO */
+ ret =
+ readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TXE),
+ 10, 1000);
+ if (ret)
+ dev_warn(port->dev, "1 character may be erased\n");
+
writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001
From: Valentin Caron <valentin.caron(a)foss.st.com>
Date: Tue, 11 Jan 2022 17:44:40 +0100
Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending
x_char
When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.
This code checks if the previous value in TDR register is sent before
writing the x_char value into register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
+ u32 isr;
+ int ret;
if (port->x_char) {
if (stm32_usart_tx_dma_started(stm32_port) &&
stm32_usart_tx_dma_enabled(stm32_port))
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+ /* Check that TDR is empty before filling FIFO */
+ ret =
+ readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TXE),
+ 10, 1000);
+ if (ret)
+ dev_warn(port->dev, "1 character may be erased\n");
+
writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001
From: Valentin Caron <valentin.caron(a)foss.st.com>
Date: Tue, 11 Jan 2022 17:44:40 +0100
Subject: [PATCH] serial: stm32: prevent TDR register overwrite when sending
x_char
When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.
This code checks if the previous value in TDR register is sent before
writing the x_char value into register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <stable(a)vger.kernel.org>
Signed-off-by: Valentin Caron <valentin.caron(a)foss.st.com>
Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org>
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 1f89ab0e49ac..c1b8828451c8 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
+ u32 isr;
+ int ret;
if (port->x_char) {
if (stm32_usart_tx_dma_started(stm32_port) &&
stm32_usart_tx_dma_enabled(stm32_port))
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+ /* Check that TDR is empty before filling FIFO */
+ ret =
+ readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TXE),
+ 10, 1000);
+ if (ret)
+ dev_warn(port->dev, "1 character may be erased\n");
+
writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;