September 2021 - Linux-stable-mirror

[PATCH 3/8] arm64: dts: imx8mm-kontron: Set VDD_SNVS to 800 mV

by Frieder Schrempf

From: Frieder Schrempf <frieder.schrempf(a)kontron.de> According to the datasheet VDD_SNVS should be 800 mV, so let's make sure that the voltage won't be different. Fixes: 21c4f45b335f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable(a)vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf(a)kontron.de> --- arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index b12fb7ce6686..213014f59b46 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -152,8 +152,8 @@ reg_nvcc_snvs: LDO1 { reg_vdd_snvs: LDO2 { regulator-name = "ldo2"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <900000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; regulator-boot-on; regulator-always-on; }; -- 2.33.0

3 years

3
3
0 0

[PATCH v2 1/2] power: supply: max17042_battery: Clear status bits in interrupt handler

by Sebastian Krzyszkowiak

The gauge requires us to clear the status bits manually for some alerts to be properly dismissed. Previously the IRQ was configured to react only on falling edge, which wasn't technically correct (the ALRT line is active low), but it had a happy side-effect of preventing interrupt storms on uncleared alerts from happening. Fixes: 7fbf6b731bca ("power: supply: max17042: Do not enforce (incorrect) interrupt trigger type") Cc: <stable(a)vger.kernel.org> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak(a)puri.sm> --- v2: added a comment on why it clears all alert bits --- drivers/power/supply/max17042_battery.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index 8dffae76b6a3..da78ffe6a3ec 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -876,6 +876,10 @@ static irqreturn_t max17042_thread_handler(int id, void *dev) max17042_set_soc_threshold(chip, 1); } + /* we implicitly handle all alerts via power_supply_changed */ + regmap_clear_bits(chip->regmap, MAX17042_STATUS, + 0xFFFF & ~(STATUS_POR_BIT | STATUS_BST_BIT)); + power_supply_changed(chip->battery); return IRQ_HANDLED; } -- 2.33.0

3 years

3
5
0 0

[PATCH v2 0/2] powerpc:85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n

by Xiaoming Ni

When CONFIG_SMP=y, timebase synchronization is required for mpc8572 when the second kernel is started arch/powerpc/kernel/smp.c: int __cpu_up(unsigned int cpu, struct task_struct *tidle) { ... if (smp_ops->give_timebase) smp_ops->give_timebase(); ... } void start_secondary(void *unused) { ... if (smp_ops->take_timebase) smp_ops->take_timebase(); ... } When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n, smp_85xx_ops.give_timebase is NULL, smp_85xx_ops.take_timebase is NULL, As a result, the timebase is not synchronized. test code: for i in $(seq 1 3); do taskset 1 date; taskset 2 date; sleep 1; echo;done log: Sat Sep 25 18:50:00 CST 2021 Sat Sep 25 19:07:47 CST 2021 Sat Sep 25 18:50:01 CST 2021 Sat Sep 25 19:07:48 CST 2021 Sat Sep 25 18:50:02 CST 2021 Sat Sep 25 19:07:49 CST 2021 Code snippet about give_timebase and take_timebase assignments: arch/powerpc/platforms/85xx/smp.c: #ifdef CONFIG_HOTPLUG_CPU #ifdef CONFIG_FSL_CORENET_RCPM fsl_rcpm_init(); #endif #ifdef CONFIG_FSL_PMC mpc85xx_setup_pmc(); #endif if (qoriq_pm_ops) { smp_85xx_ops.give_timebase = mpc85xx_give_timebase; smp_85xx_ops.take_timebase = mpc85xx_take_timebase; config dependency: FSL_CORENET_RCPM depends on the PPC_E500MC. FSL_PMC depends on SUSPEND. SUSPEND depends on ARCH_SUSPEND_POSSIBLE. ARCH_SUSPEND_POSSIBLE depends on !PPC_E500MC. CONFIG_HOTPLUG_CPU and CONFIG_FSL_PMC require the timebase function, but the timebase should not depend on CONFIG_HOTPLUG_CPU and CONFIG_FSL_PMC. Therefore, adjust the macro control range. Ensure that the corresponding timebase hook function is not empty when the dtsi node is configured. ----- changes in v2: 1. add new patch: "powerpc:85xx:Fix oops when mpc85xx_smp_guts_ids node cannot be found" 2. Using !CONFIG_FSL_CORENET_RCPM to manage the timebase code of !PPC_E500MC v1: https://lore.kernel.org/lkml/20210926025144.55674-1-nixiaoming@huawei.com ------ Xiaoming Ni (2): powerpc:85xx:Fix oops when mpc85xx_smp_guts_ids node cannot be found powerpc:85xx: fix timebase sync issue when CONFIG_HOTPLUG_CPU=n arch/powerpc/platforms/85xx/Makefile | 4 +++- arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c | 7 +++++-- arch/powerpc/platforms/85xx/smp.c | 12 ++++++------ 3 files changed, 14 insertions(+), 9 deletions(-) -- 2.27.0

3 years

2
3
0 0

Drivers for Qualcomm wifi chips (ath*k) and security issues

by Pali Rohár

Hello Sasha and Greg! Last week I sent request for backporting ath9k wifi fixes for security issue CVE-2020-3702 into stable LTS kernels because Qualcomm/maintainers did not it for more months... details are in email: https://lore.kernel.org/stable/20210818084859.vcs4vs3yd6zetmyt@pali/t/#u And now I got reports that in stable LTS kernels (4.14, 4.19) are missing also other fixes for other Qualcomm wifi security issues, covered by FragAttacks codename: CVE-2020-26145 CVE-2020-26139 CVE-2020-26141 People have already asked if somebody is already doing backports to 4.19 of patches for these security issues, but there was no response, see email: https://lore.kernel.org/linux-wireless/704e1c77-6c48-79f7-043a-b2d03fbfef8b… I got information that issues for ath10k are again going to be (or are already?) fixed in some vendor custom/fork kernels, but not in official stable tree 4.14/4.19 (yet). This situation is really bad because lot of times I hear to use mainline kernel versions or official stable LTS tree (which are maintained by you), but due to such security issues in LTS trees which stays unfixed and others say to use rather vendor custom/fork kernels where it is claimed that issues are fixed. And because there is no statement for end users (end users do not communicate with vendors and so they do not have information what is supported and what not), end users just use what Linux open source distributions have in their kernels (which lot of times match official LTS kernel trees). And users think that everything is OK and security issues are fixed. So there is really a need for public statement from you or Qualcomm side, if stable LTS kernel trees are going to include security fixes for drivers used by Qualcomm wifi chips (ath*k) or not or under which conditions. And what should users / Linux distributions use if they do not want to have years-old unpatched drivers with security issues. Such information is really important also for distributions which include unmodified (or slightly modified) kernel LTS trees into their own packages. As they also need to know from which source should take (e.g. Qualcomm wifi) drivers for their systems to ensure that have security patches applied. I can understand that you or other people or volunteers do not have time to track or maintain some parts of drivers. So nothing wrong if official statement is that stable trees X and Y do not receive security updates for driver A and B anymore. Also I can understand that it takes some time to include required fixes, so expect fixes for A and B in X and Y versions with one month delay. But it is needed to know what should people expect from LTS trees for particular drivers. Because I think it is not currently clear... Do not take me wrong, I just wanted to show that this is hidden problem which needs some discussion.

3 years

6
7
0 0

[PATCH v2 1/2] mwifiex: Use non-posted PCI write when setting TX ring write pointer

by Jonas Dreßler

On the 88W8897 card it's very important the TX ring write pointer is updated correctly to its new value before setting the TX ready interrupt, otherwise the firmware appears to crash (probably because it's trying to DMA-read from the wrong place). The issue is present in the latest firmware version 15.68.19.p21 of the pcie+usb card. Since PCI uses "posted writes" when writing to a register, it's not guaranteed that a write will happen immediately. That means the pointer might be outdated when setting the TX ready interrupt, leading to firmware crashes especially when ASPM L1 and L1 substates are enabled (because of the higher link latency, the write will probably take longer). So fix those firmware crashes by always using a non-posted write for this specific register write. We do that by simply reading back the register after writing it, just as a few other PCI drivers do. This fixes a bug where during rx/tx traffic and with ASPM L1 substates enabled (the enabled substates are platform dependent), the firmware crashes and eventually a command timeout appears in the logs. Cc: stable(a)vger.kernel.org Signed-off-by: Jonas Dreßler <verdre(a)v0yd.nl> --- drivers/net/wireless/marvell/mwifiex/pcie.c | 26 ++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c index c6ccce426b49..0eff717ac5fa 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c @@ -240,6 +240,20 @@ static int mwifiex_write_reg(struct mwifiex_adapter *adapter, int reg, u32 data) return 0; } +/* + * This function does a non-posted write into a PCIE card register, ensuring + * it's completion before returning. + */ +static int mwifiex_write_reg_np(struct mwifiex_adapter *adapter, int reg, u32 data) +{ + struct pcie_service_card *card = adapter->card; + + iowrite32(data, card->pci_mmap1 + reg); + ioread32(card->pci_mmap1 + reg); + + return 0; +} + /* This function reads data from PCIE card register. */ static int mwifiex_read_reg(struct mwifiex_adapter *adapter, int reg, u32 *data) @@ -1482,9 +1496,15 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, reg->tx_rollover_ind); rx_val = card->rxbd_rdptr & reg->rx_wrap_mask; - /* Write the TX ring write pointer in to reg->tx_wrptr */ - if (mwifiex_write_reg(adapter, reg->tx_wrptr, - card->txbd_wrptr | rx_val)) { + /* Write the TX ring write pointer in to reg->tx_wrptr. + * The firmware (latest version 15.68.19.p21) of the 88W8897 + * pcie+usb card seems to crash when getting the TX ready + * interrupt but the TX ring write pointer points to an outdated + * address, so it's important we do a non-posted write here to + * force the completion of the write. + */ + if (mwifiex_write_reg_np(adapter, reg->tx_wrptr, + card->txbd_wrptr | rx_val)) { mwifiex_dbg(adapter, ERROR, "SEND DATA: failed to write reg->tx_wrptr\n"); ret = -1; -- 2.31.1

3 years

4
8
0 0

[PATCH] ARM: dts: omap3430-sdp: Fix NAND device node

by Roger Quadros

Nand is on CS1 so reg properties first field should be 1 not 0. Fixes: 44e4716499b8 ("ARM: dts: omap3: Fix NAND device nodes") Cc: stable(a)vger.kernel.org # v4.6+ Signed-off-by: Roger Quadros <rogerq(a)kernel.org> --- arch/arm/boot/dts/omap3430-sdp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts index c5b903718414..7d530ae3483b 100644 --- a/arch/arm/boot/dts/omap3430-sdp.dts +++ b/arch/arm/boot/dts/omap3430-sdp.dts @@ -101,7 +101,7 @@ nand@1,0 { compatible = "ti,omap2-nand"; - reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + reg = <1 0 4>; /* CS1, offset 0, IO size 4 */ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ -- 2.17.1

3 years

2
1
0 0

[PATCH 8/8] arm64: dts: imx8mm-kontron: Leave reg_vdd_arm always powered on

by Frieder Schrempf

From: Frieder Schrempf <frieder.schrempf(a)kontron.de> When the cpufreq driver is enabled, the buck2 regulator is kept powered on by the dependency between the CPU nodes with 'cpu-supply' set. Without the cpufreq driver the kernel will power off the regulator as it doesn't see any users. This is obviously not what we want, therefore keep the regulator powered on in any case. Reported-by: Heiko Thiery <heiko.thiery(a)gmail.com> Fixes: 21c4f45b335f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable(a)vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf(a)kontron.de> --- arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index 213014f59b46..c3418d263eb4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -105,6 +105,7 @@ reg_vdd_arm: BUCK2 { regulator-min-microvolt = <850000>; regulator-max-microvolt = <950000>; regulator-boot-on; + regulator-always-on; regulator-ramp-delay = <3125>; nxp,dvs-run-voltage = <950000>; nxp,dvs-standby-voltage = <850000>; -- 2.33.0

3 years

3
2
0 0

[PATCH 6/8] arm64: dts: imx8mm-kontron: Fix connection type for VSC8531 RGMII PHY

by Frieder Schrempf

From: Frieder Schrempf <frieder.schrempf(a)kontron.de> Previously we falsely relied on the PHY driver to unconditionally enable the internal RX delay. Since the following fix for the PHY driver this is not the case anymore: commit 7b005a1742be ("net: phy: mscc: configure both RX and TX internal delays for RGMII") In order to enable the delay we need to set the connection type to "rgmii-rxid". Fixes: 21c4f45b335f ("arm64: dts: Add the Kontron i.MX8M Mini SoMs and baseboards") Cc: stable(a)vger.kernel.org Signed-off-by: Frieder Schrempf <frieder.schrempf(a)kontron.de> --- arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts index dbf11e03ecce..0e4509287a92 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -114,7 +114,7 @@ &ecspi3 { &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-rxid"; phy-handle = <&ethphy>; status = "okay"; -- 2.33.0

3 years

2
1
0 0

[PATCH 1/2] drm/i915: Extend the async flip VT-d w/a to skl/bxt

by Ville Syrjala

From: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Looks like skl/bxt/derivatives also need the plane stride stretch w/a when using async flips and VT-d is enabled, or else we get corruption on screen. To my surprise this was even documented in bspec, but only as a note on the CHICHKEN_PIPESL register description rather than on the w/a list. So very much the same thing as on HSW/BDW, except the bits moved yet again. Cc: stable(a)vger.kernel.org Cc: Karthik B S <karthik.b.s(a)intel.com> Fixes: 55ea1cb178ef ("drm/i915: Enable async flips in i915") Signed-off-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> --- drivers/gpu/drm/i915/i915_reg.h | 5 +++++ drivers/gpu/drm/i915/intel_pm.c | 12 ++++++++++++ 2 files changed, 17 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 3a20a55d2512..29f6bfc2002d 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -8222,6 +8222,11 @@ enum { #define HSW_SPR_STRETCH_MAX_X1 REG_FIELD_PREP(HSW_SPR_STRETCH_MAX_MASK, 3) #define HSW_FBCQ_DIS (1 << 22) #define BDW_DPRS_MASK_VBLANK_SRD (1 << 0) +#define SKL_PLANE1_STRETCH_MAX_MASK REG_GENMASK(1, 0) +#define SKL_PLANE1_STRETCH_MAX_X8 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 0) +#define SKL_PLANE1_STRETCH_MAX_X4 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 1) +#define SKL_PLANE1_STRETCH_MAX_X2 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 2) +#define SKL_PLANE1_STRETCH_MAX_X1 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 3) #define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B) #define _CHICKEN_TRANS_A 0x420c0 diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index ef5f73934dab..74d4620a4999 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -76,6 +76,8 @@ struct intel_wm_config { static void gen9_init_clock_gating(struct drm_i915_private *dev_priv) { + enum pipe pipe; + if (HAS_LLC(dev_priv)) { /* * WaCompressedResourceDisplayNewHashMode:skl,kbl @@ -89,6 +91,16 @@ static void gen9_init_clock_gating(struct drm_i915_private *dev_priv) SKL_DE_COMPRESSED_HASH_MODE); } + for_each_pipe(dev_priv, pipe) { + /* + * "Plane N strech max must be programmed to 11b (x1) + * when Async flips are enabled on that plane." + */ + if (!IS_GEMINILAKE(dev_priv) && intel_vtd_active()) + intel_uncore_rmw(&dev_priv->uncore, CHICKEN_PIPESL_1(pipe), + SKL_PLANE1_STRETCH_MAX_MASK, SKL_PLANE1_STRETCH_MAX_X1); + } + /* See Bspec note for PSR2_CTL bit 31, Wa#828:skl,bxt,kbl,cfl */ intel_uncore_write(&dev_priv->uncore, CHICKEN_PAR1_1, intel_uncore_read(&dev_priv->uncore, CHICKEN_PAR1_1) | SKL_EDP_PSR_FIX_RDWRAP); -- 2.32.0

3 years

3
5
0 0

[PATCH] spi: bcm2835: do not unregister controller in shutdown handler

by Lino Sanfilippo

Do not unregister the SPI controller in the shutdown handler. The reason to avoid this is that controller unregistration results in the slave devices remove() handler being called which may be unexpected for slave drivers at system shutdown. One example is if the BCM2835 driver is used together with the TPM SPI driver: At system shutdown first the TPM chip devices (pre) shutdown handler (tpm_class_shutdown) is called, stopping the chip and setting an operations pointer to NULL. Then since the BCM2835 shutdown handler unregisters the SPI controller the TPM SPI remove function (tpm_tis_spi_remove) is also called. In case of TPM 2 this function accesses the now nullified operations pointer, resulting in the following NULL pointer access: [ 174.078277] 8<--- cut here --- [ 174.078288] Unable to handle kernel NULL pointer dereference at virtual address 00000034 [ 174.078293] pgd = 557a5fc9 [ 174.078300] [00000034] *pgd=031cf003, *pmd=00000000 [ 174.078317] Internal error: Oops: 206 [#1] SMP ARM [ 174.078323] Modules linked in: tpm_tis_spi tpm_tis_core tpm spidev gpio_pca953x mcp320x rtc_pcf2127 industrialio regmap_i2c regmap_spi 8021q garp stp llc ftdi_sio6 [ 174.078441] CPU: 3 PID: 1 Comm: systemd-shutdow Tainted: G WC 5.10.27-rt36-C4LS+ #1 [ 174.078448] Hardware name: BCM2835 [ 174.078451] PC is at tpm_chip_start+0x1c/0xc0 [tpm] [ 174.078492] LR is at tpm_chip_unregister+0xc0/0xe0 [tpm] [ 174.078525] pc : [<bf244080>] lr : [<bf2447c8>] psr: 20000013 [ 174.078529] sp : c1903c38 ip : c1903c50 fp : c1903c4c [ 174.078533] r10: c1aca054 r9 : c0e77b28 r8 : c311c000 [ 174.078537] r7 : 00000000 r6 : bf262010 r5 : c323fbf8 r4 : c323f800 [ 174.078541] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : c323f800 [ 174.078546] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 174.078553] Control: 30c5383d Table: 02a47980 DAC: f7bd3313 [ 174.078556] Process systemd-shutdow (pid: 1, stack limit = 0xa0551b1d) [ 174.078561] Stack: (0xc1903c38 to 0xc1904000) [ 174.078566] 3c20: c323f800 c323fbf8 [ 174.078574] 3c40: c1903c64 c1903c50 bf2447c8 bf244070 c323f800 c3498800 c1903c7c c1903c68 [ 174.078581] 3c60: bf260190 bf244714 c3498800 c3498800 c1903c94 c1903c80 c08b9fa8 bf26017c [ 174.078588] 3c80: c3498800 00000000 c1903cb4 c1903c98 c0862b20 c08b9f7c c1aaf730 c3498800 [ 174.078595] 3ca0: c12fc9d0 00000000 c1903cc4 c1903cb8 c0862bf4 c0862a1c c1903ce4 c1903cc8 [ 174.078602] 3cc0: c08612d0 c0862be0 c3498800 00005744 c08ba298 00000000 c1903d2c c1903ce8 [ 174.078609] 3ce0: c085c61c c0861200 ffffe000 c13404c0 c0781f40 c0e77b28 c1903d2c c1205048 [ 174.078616] 3d00: c0332c3c c3498800 00000000 c08ba298 c13fdd7c c1356018 c0e77b28 c1aca054 [ 174.078623] 3d20: c1903d44 c1903d30 c085c8d0 c085c498 c3498800 00000000 c1903d5c c1903d48 [ 174.078630] 3d40: c08ba294 c085c8c0 c311c000 00000000 c1903d6c c1903d60 c08ba2b0 c08ba25c [ 174.078638] 3d60: c1903d9c c1903d70 c085bb90 c08ba2a4 c1903d8c c369a080 c369a114 c1205048 [ 174.078645] 3d80: c1903da4 c311c000 c311c000 00000000 c1903dbc c1903da0 c08ba748 c085bb2c [ 174.078651] 3da0: c311c380 c311c000 00000000 c13fdd7c c1903ddc c1903dc0 bf168534 c08ba718 [ 174.078659] 3dc0: c1aca000 c1a75010 c1aca010 c13fdd7c c1903df4 c1903de0 bf168588 bf16850c [ 174.078666] 3de0: c1aca014 c1a75010 c1903e04 c1903df8 c0863ca0 bf168578 c1903e3c c1903e08 [ 174.078673] 3e00: c085fc90 c0863c80 c1903e3c c0e77b18 c0248888 00000000 00000000 8855a600 [ 174.078680] 3e20: c120f1cc fee1dead c1902000 00000058 c1903e4c c1903e40 c0249eb0 c085fb00 [ 174.078687] 3e40: c1903e64 c1903e50 c0249fa0 c0249e78 01234567 00000000 c1903f94 c1903e68 [ 174.078694] 3e60: c024a244 c0249f90 c1903ed4 c2ec5180 00000024 c1903f58 00000005 c0441f50 [ 174.078701] 3e80: c1903ec4 c1903e90 c0441d94 c0498350 00000000 c1903ea0 c0739fa4 00000024 [ 174.078708] 3ea0: c2ec5180 c1903f58 c1903ed4 c2ec5180 00000005 00000000 c1903f4c c1903ec8 [ 174.078715] 3ec0: c0441f50 c0425938 c1903ed0 c1903ed4 00000000 00000005 00000000 00000024 [ 174.078722] 3ee0: c1903eec 00000005 c020007c bec81250 00000004 bec81f62 00000010 bec81264 [ 174.078729] 3f00: 00000005 bec8131c 0000000a b6d0ef50 00000001 c0200e70 ffffe000 c13404c0 [ 174.078736] 3f20: 00000000 c04673e8 c1903f4c c1205048 c2ec5180 bec8128c 00000000 00000000 [ 174.078743] 3f40: c1903f94 c1903f50 c04420d0 c0441eb4 00000000 c13404c0 00000000 00000000 [ 174.078750] 3f60: c1903f94 c1205048 c0332c3c c1205048 bec8131c 00000000 00000000 00000000 [ 174.078757] 3f80: 00000058 c0200204 c1903fa4 c1903f98 c024a398 c024a13c 00000000 c1903fa8 [ 174.078764] 3fa0: c0200040 c024a38c 00000000 00000000 fee1dead 28121969 01234567 8855a600 [ 174.078771] 3fc0: 00000000 00000000 00000000 00000058 00000fff bec81be8 00000000 00456b80 [ 174.078778] 3fe0: 00468e3c bec81b68 004534a8 b6e4ba38 60000010 fee1dead 00000000 00000000 [ 174.078782] Backtrace: [ 174.078786] [<bf244064>] (tpm_chip_start [tpm]) from [<bf2447c8>] (tpm_chip_unregister+0xc0/0xe0 [tpm]) [ 174.078853] r5:c323fbf8 r4:c323f800 [ 174.078855] [<bf244708>] (tpm_chip_unregister [tpm]) from [<bf260190>] (tpm_tis_spi_remove+0x20/0x30 [tpm_tis_spi]) [ 174.078899] r5:c3498800 r4:c323f800 [ 174.078901] [<bf260170>] (tpm_tis_spi_remove [tpm_tis_spi]) from [<c08b9fa8>] (spi_drv_remove+0x38/0x50) [ 174.078923] r5:c3498800 r4:c3498800 [ 174.078926] [<c08b9f70>] (spi_drv_remove) from [<c0862b20>] (device_release_driver_internal+0x110/0x1c4) [ 174.078942] r5:00000000 r4:c3498800 [ 174.078945] [<c0862a10>] (device_release_driver_internal) from [<c0862bf4>] (device_release_driver+0x20/0x24) [ 174.078959] r7:00000000 r6:c12fc9d0 r5:c3498800 r4:c1aaf730 [ 174.078962] [<c0862bd4>] (device_release_driver) from [<c08612d0>] (bus_remove_device+0xdc/0x108) [ 174.078973] [<c08611f4>] (bus_remove_device) from [<c085c61c>] (device_del+0x190/0x428) [ 174.078989] r7:00000000 r6:c08ba298 r5:00005744 r4:c3498800 [ 174.078992] [<c085c48c>] (device_del) from [<c085c8d0>] (device_unregister+0x1c/0x30) [ 174.079009] r10:c1aca054 r9:c0e77b28 r8:c1356018 r7:c13fdd7c r6:c08ba298 r5:00000000 [ 174.079013] r4:c3498800 [ 174.079015] [<c085c8b4>] (device_unregister) from [<c08ba294>] (spi_unregister_device+0x44/0x48) [ 174.079030] r5:00000000 r4:c3498800 [ 174.079033] [<c08ba250>] (spi_unregister_device) from [<c08ba2b0>] (__unregister+0x18/0x20) [ 174.079048] r5:00000000 r4:c311c000 [ 174.079050] [<c08ba298>] (__unregister) from [<c085bb90>] (device_for_each_child+0x70/0xb4) [ 174.079064] [<c085bb20>] (device_for_each_child) from [<c08ba748>] (spi_unregister_controller+0x3c/0x134) [ 174.079081] r6:00000000 r5:c311c000 r4:c311c000 [ 174.079083] [<c08ba70c>] (spi_unregister_controller) from [<bf168534>] (bcm2835_spi_remove+0x34/0x6c [spi_bcm2835]) [ 174.079104] r7:c13fdd7c r6:00000000 r5:c311c000 r4:c311c380 [ 174.079107] [<bf168500>] (bcm2835_spi_remove [spi_bcm2835]) from [<bf168588>] (bcm2835_spi_shutdown+0x1c/0x38 [spi_bcm2835]) [ 174.079130] r7:c13fdd7c r6:c1aca010 r5:c1a75010 r4:c1aca000 [ 174.079132] [<bf16856c>] (bcm2835_spi_shutdown [spi_bcm2835]) from [<c0863ca0>] (platform_drv_shutdown+0x2c/0x30) [ 174.079150] r5:c1a75010 r4:c1aca014 [ 174.079153] [<c0863c74>] (platform_drv_shutdown) from [<c085fc90>] (device_shutdown+0x19c/0x24c) [ 174.079164] [<c085faf4>] (device_shutdown) from [<c0249eb0>] (kernel_restart_prepare+0x44/0x48) [ 174.079183] r10:00000058 r9:c1902000 r8:fee1dead r7:c120f1cc r6:8855a600 r5:00000000 [ 174.079186] r4:00000000 [ 174.079189] [<c0249e6c>] (kernel_restart_prepare) from [<c0249fa0>] (kernel_restart+0x1c/0x60) [ 174.079203] [<c0249f84>] (kernel_restart) from [<c024a244>] (__do_sys_reboot+0x114/0x1f8) [ 174.079218] r5:00000000 r4:01234567 [ 174.079221] [<c024a130>] (__do_sys_reboot) from [<c024a398>] (sys_reboot+0x18/0x1c) [ 174.079238] r8:c0200204 r7:00000058 r6:00000000 r5:00000000 r4:00000000 [ 174.079241] [<c024a380>] (sys_reboot) from [<c0200040>] (ret_fast_syscall+0x0/0x28) [ 174.079254] Exception stack(0xc1903fa8 to 0xc1903ff0) [ 174.079260] 3fa0: 00000000 00000000 fee1dead 28121969 01234567 8855a600 [ 174.079267] 3fc0: 00000000 00000000 00000000 00000058 00000fff bec81be8 00000000 00456b80 [ 174.079273] 3fe0: 00468e3c bec81b68 004534a8 b6e4ba38 [ 174.079280] Code: e52de004 e8bd4000 e5903410 e1a04000 (e5932034) [ 174.079285] ---[ end trace 33e1042219f38210 ]--- [ 174.879428] Kernel panic - not syncing: [ 174.879432] Attempted to kill init! exitcode=0x0000000b Fix this by only shutting down the hardware and not unregistering the SPI controller in the drivers shutdown handler. Fixes: 118eb0e52eb7 ("spi: bcm2835: Implement shutdown callback") Cc: stable(a)vger.kernel.org Signed-off-by: Lino Sanfilippo <LinoSanfilippo(a)gmx.de> --- The first attempt to fix this was with an extra check in the tpm chip driver (see https://marc.info/?l=linux-integrity&m=163129718414118&w=2) to avoid the NULL pointer access. Then Jason Gunthorpe noted that the real issue was the BCM driver unregistering the chip in the shutdown handler(see https://marc.info/?l=linux-integrity&m=163129718414118&w=2) which led me to this solution. This patch has been tested on a Raspberry Pi 5.10 kernel with a SLB 9670 TPM chip. drivers/spi/spi-bcm2835.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 775c0bf2f923..a2e4dafc7dff 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -1390,15 +1390,11 @@ static int bcm2835_spi_probe(struct platform_device *pdev) return err; } -static int bcm2835_spi_remove(struct platform_device *pdev) +static void bcm2835_spi_shutdown(struct platform_device *pdev) { struct spi_controller *ctlr = platform_get_drvdata(pdev); struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); - bcm2835_debugfs_remove(bs); - - spi_unregister_controller(ctlr); - bcm2835_dma_release(ctlr, bs); /* Clear FIFOs, and disable the HW block */ @@ -1406,17 +1402,20 @@ static int bcm2835_spi_remove(struct platform_device *pdev) BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); clk_disable_unprepare(bs->clk); - - return 0; } -static void bcm2835_spi_shutdown(struct platform_device *pdev) +static int bcm2835_spi_remove(struct platform_device *pdev) { - int ret; + struct spi_controller *ctlr = platform_get_drvdata(pdev); + struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); - ret = bcm2835_spi_remove(pdev); - if (ret) - dev_err(&pdev->dev, "failed to shutdown\n"); + bcm2835_debugfs_remove(bs); + + spi_unregister_controller(ctlr); + + bcm2835_spi_shutdown(pdev); + + return 0; } static const struct of_device_id bcm2835_spi_match[] = { base-commit: 0513e464f9007b70b96740271a948ca5ab6e7dd7 -- 2.33.0

3 years

4
22
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2021