The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 4030a6e6a6a4a42ff8c18414c9e0c93e24cc70b8 Mon Sep 17 00:00:00 2001
From: Paul Burton <paulburton(a)google.com>
Date: Thu, 1 Jul 2021 10:24:07 -0700
Subject: [PATCH] tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULT
Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that
on systems where pid_max is configured higher than PID_MAX_DEFAULT the
ftrace record-tgid option doesn't work so well. Any tasks with PIDs
higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and
don't show up in the saved_tgids file.
In particular since systemd v243 & above configure pid_max to its
highest possible 1<<22 value by default on 64 bit systems this renders
the record-tgids option of little use.
Increase the size of tgid_map to the configured pid_max instead,
allowing it to cover the full range of PIDs up to the maximum value of
PID_MAX_LIMIT if the system is configured that way.
On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the
size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in
memory overhead sounds significant 64 bit systems are presumably best
placed to accommodate it, and since tgid_map is only allocated when the
record-tgid option is actually used presumably the user would rather it
spends sufficient memory to actually record the tgids they expect.
The size of tgid_map could also increase for CONFIG_BASE_SMALL=y
configurations, but these seem unlikely to be systems upon which people
are both configuring a large pid_max and running ftrace with record-tgid
anyway.
Of note is that we only allocate tgid_map once, the first time that the
record-tgid option is enabled. Therefore its size is only set once, to
the value of pid_max at the time the record-tgid option is first
enabled. If a user increases pid_max after that point, the saved_tgids
file will not contain entries for any tasks with pids beyond the earlier
value of pid_max.
Link: https://lkml.kernel.org/r/20210701172407.889626-2-paulburton@google.com
Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo(a)redhat.com>
Cc: Joel Fernandes <joelaf(a)google.com>
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Paul Burton <paulburton(a)google.com>
[ Fixed comment coding style ]
Signed-off-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org>
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 4843076d67d3..14f56e9fa001 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2191,8 +2191,15 @@ void tracing_reset_all_online_cpus(void)
}
}
+/*
+ * The tgid_map array maps from pid to tgid; i.e. the value stored at index i
+ * is the tgid last observed corresponding to pid=i.
+ */
static int *tgid_map;
+/* The maximum valid index into tgid_map. */
+static size_t tgid_map_max;
+
#define SAVED_CMDLINES_DEFAULT 128
#define NO_CMDLINE_MAP UINT_MAX
static arch_spinlock_t trace_cmdline_lock = __ARCH_SPIN_LOCK_UNLOCKED;
@@ -2468,24 +2475,41 @@ void trace_find_cmdline(int pid, char comm[])
preempt_enable();
}
+static int *trace_find_tgid_ptr(int pid)
+{
+ /*
+ * Pairs with the smp_store_release in set_tracer_flag() to ensure that
+ * if we observe a non-NULL tgid_map then we also observe the correct
+ * tgid_map_max.
+ */
+ int *map = smp_load_acquire(&tgid_map);
+
+ if (unlikely(!map || pid > tgid_map_max))
+ return NULL;
+
+ return &map[pid];
+}
+
int trace_find_tgid(int pid)
{
- if (unlikely(!tgid_map || !pid || pid > PID_MAX_DEFAULT))
- return 0;
+ int *ptr = trace_find_tgid_ptr(pid);
- return tgid_map[pid];
+ return ptr ? *ptr : 0;
}
static int trace_save_tgid(struct task_struct *tsk)
{
+ int *ptr;
+
/* treat recording of idle task as a success */
if (!tsk->pid)
return 1;
- if (unlikely(!tgid_map || tsk->pid > PID_MAX_DEFAULT))
+ ptr = trace_find_tgid_ptr(tsk->pid);
+ if (!ptr)
return 0;
- tgid_map[tsk->pid] = tsk->tgid;
+ *ptr = tsk->tgid;
return 1;
}
@@ -5225,6 +5249,8 @@ int trace_keep_overwrite(struct tracer *tracer, u32 mask, int set)
int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled)
{
+ int *map;
+
if ((mask == TRACE_ITER_RECORD_TGID) ||
(mask == TRACE_ITER_RECORD_CMD))
lockdep_assert_held(&event_mutex);
@@ -5247,10 +5273,19 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled)
trace_event_enable_cmd_record(enabled);
if (mask == TRACE_ITER_RECORD_TGID) {
- if (!tgid_map)
- tgid_map = kvcalloc(PID_MAX_DEFAULT + 1,
- sizeof(*tgid_map),
- GFP_KERNEL);
+ if (!tgid_map) {
+ tgid_map_max = pid_max;
+ map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map),
+ GFP_KERNEL);
+
+ /*
+ * Pairs with smp_load_acquire() in
+ * trace_find_tgid_ptr() to ensure that if it observes
+ * the tgid_map we just allocated then it also observes
+ * the corresponding tgid_map_max value.
+ */
+ smp_store_release(&tgid_map, map);
+ }
if (!tgid_map) {
tr->trace_flags &= ~TRACE_ITER_RECORD_TGID;
return -ENOMEM;
@@ -5664,18 +5699,14 @@ static void *saved_tgids_next(struct seq_file *m, void *v, loff_t *pos)
{
int pid = ++(*pos);
- if (pid > PID_MAX_DEFAULT)
- return NULL;
-
- return &tgid_map[pid];
+ return trace_find_tgid_ptr(pid);
}
static void *saved_tgids_start(struct seq_file *m, loff_t *pos)
{
- if (!tgid_map || *pos > PID_MAX_DEFAULT)
- return NULL;
+ int pid = *pos;
- return &tgid_map[*pos];
+ return trace_find_tgid_ptr(pid);
}
static void saved_tgids_stop(struct seq_file *m, void *v)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 76224355db7570cbe6b6f75c8929a1558828dd55 Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi(a)redhat.com>
Date: Tue, 17 Aug 2021 21:05:16 +0200
Subject: [PATCH] fuse: truncate pagecache on atomic_o_trunc
fuse_finish_open() will be called with FUSE_NOWRITE in case of atomic
O_TRUNC. This can deadlock with fuse_wait_on_page_writeback() in
fuse_launder_page() triggered by invalidate_inode_pages2().
Fix by replacing invalidate_inode_pages2() in fuse_finish_open() with a
truncate_pagecache() call. This makes sense regardless of FOPEN_KEEP_CACHE
or fc->writeback cache, so do it unconditionally.
Reported-by: Xie Yongji <xieyongji(a)bytedance.com>
Reported-and-tested-by: syzbot+bea44a5189836d956894(a)syzkaller.appspotmail.com
Fixes: e4648309b85a ("fuse: truncate pending writes on O_TRUNC")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com>
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 97f860cfc195..5e5efb66c7d7 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -198,12 +198,11 @@ void fuse_finish_open(struct inode *inode, struct file *file)
struct fuse_file *ff = file->private_data;
struct fuse_conn *fc = get_fuse_conn(inode);
- if (!(ff->open_flags & FOPEN_KEEP_CACHE))
- invalidate_inode_pages2(inode->i_mapping);
if (ff->open_flags & FOPEN_STREAM)
stream_open(inode, file);
else if (ff->open_flags & FOPEN_NONSEEKABLE)
nonseekable_open(inode, file);
+
if (fc->atomic_o_trunc && (file->f_flags & O_TRUNC)) {
struct fuse_inode *fi = get_fuse_inode(inode);
@@ -211,10 +210,14 @@ void fuse_finish_open(struct inode *inode, struct file *file)
fi->attr_version = atomic64_inc_return(&fc->attr_version);
i_size_write(inode, 0);
spin_unlock(&fi->lock);
+ truncate_pagecache(inode, 0);
fuse_invalidate_attr(inode);
if (fc->writeback_cache)
file_update_time(file);
+ } else if (!(ff->open_flags & FOPEN_KEEP_CACHE)) {
+ invalidate_inode_pages2(inode->i_mapping);
}
+
if ((file->f_mode & FMODE_WRITE) && fc->writeback_cache)
fuse_link_write_file(file);
}
[Why]
Currently, we will create connectors for all output ports no matter
it's connected or not. However, in MST, we can only determine
whether an output port really stands for a "connector" till it is
connected and check its peer device type as an end device.
In current code, we have chance to create connectors for output ports
connected with branch device and these are redundant connectors. e.g.
StarTech 1-to-4 DP hub is constructed by internal 2 layer 1-to-2 branch
devices. Creating connectors for such internal output ports are
redundant.
[How]
Put constraint on creating connector for connected end device only.
Fixes: 6f85f73821f6 ("drm/dp_mst: Add basic topology reprobing when resuming")
Cc: Juston Li <juston.li(a)intel.com>
Cc: Imre Deak <imre.deak(a)intel.com>
Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com>
Cc: Harry Wentland <hwentlan(a)amd.com>
Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch>
Cc: Sean Paul <sean(a)poorly.run>
Cc: Lyude Paul <lyude(a)redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst(a)linux.intel.com>
Cc: Maxime Ripard <mripard(a)kernel.org>
Cc: Thomas Zimmermann <tzimmermann(a)suse.de>
Cc: David Airlie <airlied(a)linux.ie>
Cc: Daniel Vetter <daniel(a)ffwll.ch>
Cc: Alex Deucher <alexander.deucher(a)amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira(a)amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai(a)amd.com>
Cc: Eryk Brol <eryk.brol(a)amd.com>
Cc: Bas Nieuwenhuizen <bas(a)basnieuwenhuizen.nl>
Cc: Nikola Cornij <nikola.cornij(a)amd.com>
Cc: Wayne Lin <Wayne.Lin(a)amd.com>
Cc: "Ville Syrjälä" <ville.syrjala(a)linux.intel.com>
Cc: Jani Nikula <jani.nikula(a)intel.com>
Cc: Manasi Navare <manasi.d.navare(a)intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal(a)intel.com>
Cc: "José Roberto de Souza" <jose.souza(a)intel.com>
Cc: Sean Paul <seanpaul(a)chromium.org>
Cc: Ben Skeggs <bskeggs(a)redhat.com>
Cc: dri-devel(a)lists.freedesktop.org
Cc: <stable(a)vger.kernel.org> # v5.5+
Signed-off-by: Wayne Lin <Wayne.Lin(a)amd.com>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 51cd7f74f026..f13c7187b07f 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2474,7 +2474,8 @@ drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb,
if (port->connector)
drm_modeset_unlock(&mgr->base.lock);
- else if (!port->input)
+ else if (!port->input && port->pdt != DP_PEER_DEVICE_NONE &&
+ drm_dp_mst_is_end_device(port->pdt, port->mcs))
drm_dp_mst_port_add_connector(mstb, port);
if (send_link_addr && port->mstb) {
@@ -2557,6 +2558,10 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
dowork = false;
}
+ if (!port->input && !port->connector && new_pdt != DP_PEER_DEVICE_NONE &&
+ drm_dp_mst_is_end_device(new_pdt, new_mcs))
+ create_connector = true;
+
if (port->connector)
drm_modeset_unlock(&mgr->base.lock);
else if (create_connector)
--
2.17.1
From: Joerg Roedel <jroedel(a)suse.de>
Allow a runtime opt-out of kexec support for architecture code in case
the kernel is running in an environment where kexec is not properly
supported yet.
This will be used on x86 when the kernel is running as an SEV-ES
guest. SEV-ES guests need special handling for kexec to hand over all
CPUs to the new kernel. This requires special hypervisor support and
handling code in the guest which is not yet implemented.
Cc: stable(a)vger.kernel.org # v5.10+
Signed-off-by: Joerg Roedel <jroedel(a)suse.de>
---
include/linux/kexec.h | 1 +
kernel/kexec.c | 14 ++++++++++++++
kernel/kexec_file.c | 9 +++++++++
3 files changed, 24 insertions(+)
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 0c994ae37729..85c30dcd0bdc 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -201,6 +201,7 @@ int arch_kexec_kernel_verify_sig(struct kimage *image, void *buf,
unsigned long buf_len);
#endif
int arch_kexec_locate_mem_hole(struct kexec_buf *kbuf);
+bool arch_kexec_supported(void);
extern int kexec_add_buffer(struct kexec_buf *kbuf);
int kexec_locate_mem_hole(struct kexec_buf *kbuf);
diff --git a/kernel/kexec.c b/kernel/kexec.c
index b5e40f069768..275cda429380 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -190,11 +190,25 @@ static int do_kexec_load(unsigned long entry, unsigned long nr_segments,
* that to happen you need to do that yourself.
*/
+bool __weak arch_kexec_supported(void)
+{
+ return true;
+}
+
static inline int kexec_load_check(unsigned long nr_segments,
unsigned long flags)
{
int result;
+ /*
+ * The architecture may support kexec in general, but the kernel could
+ * run in an environment where it is not (yet) possible to execute a new
+ * kernel. Allow the architecture code to opt-out of kexec support when
+ * it is running in such an environment.
+ */
+ if (!arch_kexec_supported())
+ return -ENOSYS;
+
/* We only trust the superuser with rebooting the system. */
if (!capable(CAP_SYS_BOOT) || kexec_load_disabled)
return -EPERM;
diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
index 33400ff051a8..96d08a512e9c 100644
--- a/kernel/kexec_file.c
+++ b/kernel/kexec_file.c
@@ -358,6 +358,15 @@ SYSCALL_DEFINE5(kexec_file_load, int, kernel_fd, int, initrd_fd,
int ret = 0, i;
struct kimage **dest_image, *image;
+ /*
+ * The architecture may support kexec in general, but the kernel could
+ * run in an environment where it is not (yet) possible to execute a new
+ * kernel. Allow the architecture code to opt-out of kexec support when
+ * it is running in such an environment.
+ */
+ if (!arch_kexec_supported())
+ return -ENOSYS;
+
/* We only trust the superuser with rebooting the system. */
if (!capable(CAP_SYS_BOOT) || kexec_load_disabled)
return -EPERM;
--
2.33.0
After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due
to overheat (when it should not). It turned out this was due to commit
fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting").
What happens is this drivers uses a global variable to keep track of the
tcc offset (tcc_offset_save) and uses it on resume. The issue is this
variable is initialized to 0, but is only set in
tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly
set by userspace. If that does not happen, the resume path will set the
offset to 0 (in my case the h/w default being 3, the offset would become
too low after a suspend/resume cycle).
The issue did not arise before commit fe6a6de6692e, as the function
setting the offset would return if the offset was 0. This is no longer
the case (rightfully).
Fix this by not applying the offset if it wasn't saved before, reverting
back to the old logic. A better approach will come later, but this will
be easier to apply to stable kernels.
The logic to restore the offset after a resume was there long before
commit fe6a6de6692e, but as a value of 0 was considered invalid I'm
referencing the commit that made the issue possible in the Fixes tag
instead.
Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting")
Cc: stable(a)vger.kernel.org
Cc: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com>
Signed-off-by: Antoine Tenart <atenart(a)kernel.org>
---
.../thermal/intel/int340x_thermal/processor_thermal_device.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
index 0f0038af2ad4..fb64acfd5e07 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -107,7 +107,7 @@ static int tcc_offset_update(unsigned int tcc)
return 0;
}
-static unsigned int tcc_offset_save;
+static int tcc_offset_save = -1;
static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
struct device_attribute *attr, const char *buf,
@@ -352,7 +352,8 @@ int proc_thermal_resume(struct device *dev)
proc_dev = dev_get_drvdata(dev);
proc_thermal_read_ppcc(proc_dev);
- tcc_offset_update(tcc_offset_save);
+ if (tcc_offset_save >= 0)
+ tcc_offset_update(tcc_offset_save);
return 0;
}
--
2.31.1
Since commit 43c2de1002d2, we perform most HW configuration in the
bind() function. This configuration may be lost on suspend/resume, so we
need to call it again. That may lead to errors like this after system
suspend/resume:
dw-mipi-dsi-rockchip ff968000.mipi: failed to write command FIFO
panel-kingdisplay-kd097d04 ff960000.mipi.0: failed write init cmds: -110
Tested on Acer Chromebook Tab 10 (RK3399 Gru-Scarlet).
Note that early mailing list versions of this driver borrowed Rockchip's
downstream/BSP solution, to do HW configuration in mode_set() (which
*is* called at the appropriate pre-enable() times), but that was
discarded along the way. I've avoided that still, because mode_set()
documentation doesn't suggest this kind of purpose as far as I can tell.
Fixes: 43c2de1002d2 ("drm/rockchip: dsi: move all lane config except LCDC mux to bind()")
Cc: <stable(a)vger.kernel.org>
Signed-off-by: Brian Norris <briannorris(a)chromium.org>
---
Changes in v3:
- New patch, to fix related PM issue discovered after patch 1
.../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 37 +++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
index 45676b23c019..21c67343cc6c 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
@@ -268,6 +268,8 @@ struct dw_mipi_dsi_rockchip {
struct dw_mipi_dsi *dmd;
const struct rockchip_dw_dsi_chip_data *cdata;
struct dw_mipi_dsi_plat_data pdata;
+
+ bool dsi_bound;
};
struct dphy_pll_parameter_map {
@@ -964,6 +966,8 @@ static int dw_mipi_dsi_rockchip_bind(struct device *dev,
goto out_pm_runtime;
}
+ dsi->dsi_bound = true;
+
return 0;
out_pm_runtime:
@@ -983,6 +987,8 @@ static void dw_mipi_dsi_rockchip_unbind(struct device *dev,
if (dsi->is_slave)
return;
+ dsi->dsi_bound = false;
+
dw_mipi_dsi_unbind(dsi->dmd);
clk_disable_unprepare(dsi->pllref_clk);
@@ -1277,6 +1283,36 @@ static const struct phy_ops dw_mipi_dsi_dphy_ops = {
.exit = dw_mipi_dsi_dphy_exit,
};
+static int __maybe_unused dw_mipi_dsi_rockchip_resume(struct device *dev)
+{
+ struct dw_mipi_dsi_rockchip *dsi = dev_get_drvdata(dev);
+ int ret;
+
+ /*
+ * Re-configure DSI state, if we were previously initialized. We need
+ * to do this before rockchip_drm_drv tries to re-enable() any panels.
+ */
+ if (dsi->dsi_bound) {
+ ret = clk_prepare_enable(dsi->grf_clk);
+ if (ret) {
+ DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
+ return ret;
+ }
+
+ dw_mipi_dsi_rockchip_config(dsi);
+ if (dsi->slave)
+ dw_mipi_dsi_rockchip_config(dsi->slave);
+
+ clk_disable_unprepare(dsi->grf_clk);
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops dw_mipi_dsi_rockchip_pm_ops = {
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, dw_mipi_dsi_rockchip_resume)
+};
+
static int dw_mipi_dsi_rockchip_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1594,6 +1630,7 @@ struct platform_driver dw_mipi_dsi_rockchip_driver = {
.remove = dw_mipi_dsi_rockchip_remove,
.driver = {
.of_match_table = dw_mipi_dsi_rockchip_dt_ids,
+ .pm = &dw_mipi_dsi_rockchip_pm_ops,
.name = "dw-mipi-dsi-rockchip",
},
};
--
2.33.0.685.g46640cef36-goog
The introduction of the generic ECC engine API lead to a number of
changes in various drivers which broke some of them. Here is a typical
example: I expected the SM_ORDER option to be handled by the Hamming ECC
engine internals. Problem: the fsmc driver does not instantiate (yet) a
real ECC engine object so we had to use a 'bare' ECC helper instead of
the shiny rawnand functions. However, when not intializing this engine
properly and using the bare helpers, we do not get the SM ORDER feature
handled automatically. It looks like this was lost in the process so
let's ensure we use the right SM ORDER now.
Fixes: ad9ffdce4539 ("mtd: rawnand: fsmc: Fix external use of SW Hamming ECC helper")
Cc: stable(a)vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal(a)bootlin.com>
---
drivers/mtd/nand/raw/fsmc_nand.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index a3e66155ae40..658f0cbe7ce8 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -438,8 +438,10 @@ static int fsmc_correct_ecc1(struct nand_chip *chip,
unsigned char *read_ecc,
unsigned char *calc_ecc)
{
+ bool sm_order = chip->ecc.options & NAND_ECC_SOFT_HAMMING_SM_ORDER;
+
return ecc_sw_hamming_correct(buf, read_ecc, calc_ecc,
- chip->ecc.size, false);
+ chip->ecc.size, sm_order);
}
/* Count the number of 0's in buff upto a max of max_bits */
--
2.27.0