May 2021 - Linux-stable-mirror

FAILED: patch "[PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1f743c8749eacd906dd3ce402b7cd540bb69ad3e Mon Sep 17 00:00:00 2001 From: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Date: Wed, 31 Mar 2021 17:05:52 +0800 Subject: [PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-3-git-send-email-chunfeng.yun@med… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c1bc40289833..4e3d53cc24f4 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -411,6 +411,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; if (mtk->lpm_support) xhci->quirks |= XHCI_LPM_SUPPORT; + + /* + * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream, + * and it's 3 when support it. + */ + if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4) + xhci->quirks |= XHCI_BROKEN_STREAMS; } /* called during probe() after chip reset completes */ @@ -572,7 +579,8 @@ static int xhci_mtk_probe(struct platform_device *pdev) if (ret) goto put_usb3_hcd; - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) xhci->shared_hcd->can_do_streams = 1; ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);

3 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI" failed to apply to 5.11-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.11-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1f743c8749eacd906dd3ce402b7cd540bb69ad3e Mon Sep 17 00:00:00 2001 From: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Date: Wed, 31 Mar 2021 17:05:52 +0800 Subject: [PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-3-git-send-email-chunfeng.yun@med… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c1bc40289833..4e3d53cc24f4 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -411,6 +411,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; if (mtk->lpm_support) xhci->quirks |= XHCI_LPM_SUPPORT; + + /* + * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream, + * and it's 3 when support it. + */ + if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4) + xhci->quirks |= XHCI_BROKEN_STREAMS; } /* called during probe() after chip reset completes */ @@ -572,7 +579,8 @@ static int xhci_mtk_probe(struct platform_device *pdev) if (ret) goto put_usb3_hcd; - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) xhci->shared_hcd->can_do_streams = 1; ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);

3 years, 8 months

1
0
0 0

stable-rc/queue/4.14 build: 192 builds: 0 failed, 192 passed, 63 warnings (v4.14.232-110-gb748e6f1e8d4f)

by kernelci.org bot

stable-rc/queue/4.14 build: 192 builds: 0 failed, 192 passed, 63 warnings (v4.14.232-110-gb748e6f1e8d4f) Full Build Summary: https://kernelci.org/build/stable-rc/branch/queue%2F4.14/kernel/v4.14.232-1… Tree: stable-rc Branch: queue/4.14 Git Describe: v4.14.232-110-gb748e6f1e8d4f Git Commit: b748e6f1e8d4fa5e020d02b1f115a4ca6b17f60b Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Built: 6 unique architectures Warnings Detected: arc: allnoconfig (gcc-8): 1 warning axs103_defconfig (gcc-8): 1 warning axs103_smp_defconfig (gcc-8): 1 warning haps_hs_defconfig (gcc-8): 1 warning haps_hs_smp_defconfig (gcc-8): 1 warning hsdk_defconfig (gcc-8): 1 warning nsim_hs_defconfig (gcc-8): 1 warning nsim_hs_smp_defconfig (gcc-8): 1 warning nsimosci_hs_defconfig (gcc-8): 1 warning nsimosci_hs_smp_defconfig (gcc-8): 1 warning tinyconfig (gcc-8): 1 warning vdk_hs38_defconfig (gcc-8): 1 warning vdk_hs38_smp_defconfig (gcc-8): 1 warning arm64: arm: am200epdkit_defconfig (gcc-8): 1 warning cm_x2xx_defconfig (gcc-8): 1 warning colibri_pxa300_defconfig (gcc-8): 1 warning corgi_defconfig (gcc-8): 1 warning efm32_defconfig (gcc-8): 1 warning eseries_pxa_defconfig (gcc-8): 1 warning h5000_defconfig (gcc-8): 1 warning integrator_defconfig (gcc-8): 1 warning lpc32xx_defconfig (gcc-8): 1 warning lpd270_defconfig (gcc-8): 1 warning lubbock_defconfig (gcc-8): 1 warning magician_defconfig (gcc-8): 1 warning mainstone_defconfig (gcc-8): 1 warning multi_v4t_defconfig (gcc-8): 1 warning palmz72_defconfig (gcc-8): 1 warning pcm027_defconfig (gcc-8): 1 warning prima2_defconfig (gcc-8): 1 warning pxa168_defconfig (gcc-8): 1 warning pxa255-idp_defconfig (gcc-8): 1 warning pxa3xx_defconfig (gcc-8): 1 warning pxa910_defconfig (gcc-8): 1 warning raumfeld_defconfig (gcc-8): 1 warning s3c2410_defconfig (gcc-8): 1 warning s3c6400_defconfig (gcc-8): 1 warning s5pv210_defconfig (gcc-8): 1 warning spitz_defconfig (gcc-8): 1 warning stm32_defconfig (gcc-8): 1 warning tango4_defconfig (gcc-8): 1 warning tct_hammer_defconfig (gcc-8): 1 warning versatile_defconfig (gcc-8): 1 warning viper_defconfig (gcc-8): 1 warning vt8500_v6_v7_defconfig (gcc-8): 1 warning xcep_defconfig (gcc-8): 1 warning zeus_defconfig (gcc-8): 1 warning i386: mips: db1xxx_defconfig (gcc-8): 1 warning jmr3927_defconfig (gcc-8): 1 warning malta_defconfig (gcc-8): 1 warning malta_kvm_guest_defconfig (gcc-8): 1 warning malta_qemu_32r6_defconfig (gcc-8): 2 warnings maltaaprp_defconfig (gcc-8): 1 warning maltasmvp_defconfig (gcc-8): 1 warning maltasmvp_eva_defconfig (gcc-8): 1 warning maltaup_defconfig (gcc-8): 1 warning maltaup_xpa_defconfig (gcc-8): 1 warning pic32mzda_defconfig (gcc-8): 1 warning xilfpga_defconfig (gcc-8): 1 warning x86_64: allnoconfig (gcc-8): 1 warning tinyconfig (gcc-8): 1 warning x86_64_defconfig (gcc-8): 1 warning Warnings summary: 59 drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] 3 Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' 1 {standard input}:29: Warning: macro instruction expanded into multiple instructions ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- 32r2el_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- acs5k_tiny_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (i386, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- allnoconfig (x86_64, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' -------------------------------------------------------------------------------- allnoconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- am200epdkit_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- ar7_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- aspeed_g4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- aspeed_g5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- assabet_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- at91_dt_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ath25_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ath79_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- axm55xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- axs103_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- axs103_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- badge4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm2835_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm47xx_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bcm63xx_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bigsur_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bmips_be_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- bmips_stb_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- capcella_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cavium_octeon_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cerfcube_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ci20_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cm_x2xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- cm_x300_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- cobalt_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa270_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- colibri_pxa300_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- collie_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- corgi_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- davinci_all_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- db1xxx_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- decstation_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- defconfig (arm64, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- dove_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- e55_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ebsa110_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- efm32_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- em_x270_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ep93xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- eseries_pxa_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- exynos_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ezx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- footbridge_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- fuloong2e_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- gemini_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- gpr_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h3600_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- h5000_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- hackkit_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- haps_hs_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- haps_hs_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- hisi_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- hsdk_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- i386_defconfig (i386, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imote2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imx_v4_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- imx_v6_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- integrator_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- iop13xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop32x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- iop33x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ip22_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ip32_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ixp4xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- jazz_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- jmr3927_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- jornada720_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- keystone_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- ks8695_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lart_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lasat_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lemote2f_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- loongson1b_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- loongson1c_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- loongson3_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc18xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- lpc32xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- lpd270_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- lubbock_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- magician_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- mainstone_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- malta_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- malta_kvm_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- malta_kvm_guest_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- malta_qemu_32r6_defconfig (mips, gcc-8) — PASS, 0 errors, 2 warnings, 0 section mismatches Warnings: {standard input}:29: Warning: macro instruction expanded into multiple instructions drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltaaprp_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltasmvp_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltasmvp_eva_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltaup_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- maltaup_xpa_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- markeins_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mini2440_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mips_paravirt_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mmp2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- moxart_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mpc30x_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mps2_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- msp71xx_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mtx1_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v4t_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- multi_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- multi_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mvebu_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- mxs_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- neponset_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netwinder_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- netx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nhk8815_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nlm_xlp_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nlm_xlr_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nsim_hs_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- nsim_hs_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- nsimosci_hs_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- nsimosci_hs_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- nuc910_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc950_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- nuc960_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap1_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omap2plus_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- omega2p_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- orion5x_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- palmz72_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pcm027_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pic32mzda_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pistachio_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pleb_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- pnx8335_stb225_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- prima2_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa168_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa255-idp_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa3xx_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa910_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- pxa_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- qcom_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- qi_lb60_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- raumfeld_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- rb532_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rbtx49xx_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- realview_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rm200_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rpc_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- rt305x_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- s3c2410_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- s3c6400_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- s5pv210_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- sama5_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- sb1250_swarm_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shannon_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- shmobile_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- simpad_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- socfpga_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear13xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear3xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spear6xx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- spitz_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- stm32_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- sunxi_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tango4_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- tb0219_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tb0226_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tb0287_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tct_hammer_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- tegra_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tinyconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- tinyconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- tinyconfig (x86_64, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' -------------------------------------------------------------------------------- tinyconfig (i386, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- trizeps4_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u300_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- u8500_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vdk_hs38_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- vdk_hs38_smp_defconfig (arc, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- versatile_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- vexpress_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- viper_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- vocore2_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- vt8500_v6_v7_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- workpad_defconfig (mips, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches -------------------------------------------------------------------------------- x86_64_defconfig (x86_64, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h' -------------------------------------------------------------------------------- xcep_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- xilfpga_defconfig (mips, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- zeus_defconfig (arm, gcc-8) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: drivers/clk/clk.c:48:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] -------------------------------------------------------------------------------- zx_defconfig (arm, gcc-8) — PASS, 0 errors, 0 warnings, 0 section mismatches --- For more info write to <info(a)kernelci.org>

3 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1f743c8749eacd906dd3ce402b7cd540bb69ad3e Mon Sep 17 00:00:00 2001 From: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Date: Wed, 31 Mar 2021 17:05:52 +0800 Subject: [PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-3-git-send-email-chunfeng.yun@med… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c1bc40289833..4e3d53cc24f4 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -411,6 +411,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; if (mtk->lpm_support) xhci->quirks |= XHCI_LPM_SUPPORT; + + /* + * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream, + * and it's 3 when support it. + */ + if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4) + xhci->quirks |= XHCI_BROKEN_STREAMS; } /* called during probe() after chip reset completes */ @@ -572,7 +579,8 @@ static int xhci_mtk_probe(struct platform_device *pdev) if (ret) goto put_usb3_hcd; - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) xhci->shared_hcd->can_do_streams = 1; ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);

3 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1f743c8749eacd906dd3ce402b7cd540bb69ad3e Mon Sep 17 00:00:00 2001 From: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Date: Wed, 31 Mar 2021 17:05:52 +0800 Subject: [PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-3-git-send-email-chunfeng.yun@med… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c1bc40289833..4e3d53cc24f4 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -411,6 +411,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; if (mtk->lpm_support) xhci->quirks |= XHCI_LPM_SUPPORT; + + /* + * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream, + * and it's 3 when support it. + */ + if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4) + xhci->quirks |= XHCI_BROKEN_STREAMS; } /* called during probe() after chip reset completes */ @@ -572,7 +579,8 @@ static int xhci_mtk_probe(struct platform_device *pdev) if (ret) goto put_usb3_hcd; - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) xhci->shared_hcd->can_do_streams = 1; ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);

3 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1f743c8749eacd906dd3ce402b7cd540bb69ad3e Mon Sep 17 00:00:00 2001 From: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Date: Wed, 31 Mar 2021 17:05:52 +0800 Subject: [PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-3-git-send-email-chunfeng.yun@med… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c1bc40289833..4e3d53cc24f4 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -411,6 +411,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; if (mtk->lpm_support) xhci->quirks |= XHCI_LPM_SUPPORT; + + /* + * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream, + * and it's 3 when support it. + */ + if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4) + xhci->quirks |= XHCI_BROKEN_STREAMS; } /* called during probe() after chip reset completes */ @@ -572,7 +579,8 @@ static int xhci_mtk_probe(struct platform_device *pdev) if (ret) goto put_usb3_hcd; - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) xhci->shared_hcd->can_do_streams = 1; ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);

3 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 1f743c8749eacd906dd3ce402b7cd540bb69ad3e Mon Sep 17 00:00:00 2001 From: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Date: Wed, 31 Mar 2021 17:05:52 +0800 Subject: [PATCH] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI The MediaTek 0.96 xHCI controller on some platforms does not support bulk stream even HCCPARAMS says supporting, due to MaxPSASize is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS quirk to fix it. Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun(a)mediatek.com> Link: https://lore.kernel.org/r/1617181553-3503-3-git-send-email-chunfeng.yun@med… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c index c1bc40289833..4e3d53cc24f4 100644 --- a/drivers/usb/host/xhci-mtk.c +++ b/drivers/usb/host/xhci-mtk.c @@ -411,6 +411,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_SUCCESS; if (mtk->lpm_support) xhci->quirks |= XHCI_LPM_SUPPORT; + + /* + * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream, + * and it's 3 when support it. + */ + if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4) + xhci->quirks |= XHCI_BROKEN_STREAMS; } /* called during probe() after chip reset completes */ @@ -572,7 +579,8 @@ static int xhci_mtk_probe(struct platform_device *pdev) if (ret) goto put_usb3_hcd; - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) xhci->shared_hcd->can_do_streams = 1; ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);

3 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] usb: typec: tcpm: update power supply once partner accepts" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 4050f2683f2c3151dc3dd1501ac88c57caf810ff Mon Sep 17 00:00:00 2001 From: Badhri Jagan Sridharan <badhri(a)google.com> Date: Wed, 7 Apr 2021 13:07:20 -0700 Subject: [PATCH] usb: typec: tcpm: update power supply once partner accepts power_supply_changed needs to be called to notify clients after the partner accepts the requested values for the pps case. Also, remove the redundant power_supply_changed at the end of the tcpm_reset_port as power_supply_changed is already called right after usb_type is changed. Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply") Signed-off-by: Badhri Jagan Sridharan <badhri(a)google.com> Cc: stable <stable(a)vger.kernel.org> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource(a)diasemi.com> Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> Link: https://lore.kernel.org/r/20210407200723.1914388-3-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index b4a40099d7e9..d1d03ee90d8f 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -2568,6 +2568,7 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, port->pps_data.max_curr = port->pps_data.req_max_curr; port->req_supply_voltage = port->pps_data.req_out_volt; port->req_current_limit = port->pps_data.req_op_curr; + power_supply_changed(port->psy); tcpm_set_state(port, SNK_TRANSITION_SINK, 0); break; case SOFT_RESET_SEND: @@ -3136,7 +3137,6 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) port->pps_data.req_out_volt)); port->pps_data.req_op_curr = min(port->pps_data.max_curr, port->pps_data.req_op_curr); - power_supply_changed(port->psy); } return src_pdo; @@ -3561,8 +3561,6 @@ static void tcpm_reset_port(struct tcpm_port *port) port->sink_cap_done = false; if (port->tcpc->enable_frs) port->tcpc->enable_frs(port->tcpc, false); - - power_supply_changed(port->psy); } static void tcpm_detach(struct tcpm_port *port)

3 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] usb: typec: tcpm: Address incorrect values of tcpm psy for" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From e3a0720224873587954b55d193d5b4abb14f0443 Mon Sep 17 00:00:00 2001 From: Badhri Jagan Sridharan <badhri(a)google.com> Date: Wed, 7 Apr 2021 13:07:19 -0700 Subject: [PATCH] usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt, port->pps_data.max_volt, port->pps_data.max_curr even before port partner accepts the requests. This leaves incorrect values in current_limit and supply_voltage that get exported by "tcpm-source-psy-". Solving this problem by caching the request values in req_min_volt, req_max_volt, req_max_curr, req_out_volt, req_op_curr. min_volt, max_volt, max_curr gets updated once the partner accepts the request. current_limit, supply_voltage gets updated once local port's tcpm enters SNK_TRANSITION_SINK when the accepted current_limit and supply_voltage is enforced. Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply") Signed-off-by: Badhri Jagan Sridharan <badhri(a)google.com> Cc: stable <stable(a)vger.kernel.org> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource(a)diasemi.com> Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> Link: https://lore.kernel.org/r/20210407200723.1914388-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 4ea4b30ae885..b4a40099d7e9 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -268,12 +268,27 @@ struct pd_mode_data { struct typec_altmode_desc altmode_desc[ALTMODE_DISCOVERY_MAX]; }; +/* + * @min_volt: Actual min voltage at the local port + * @req_min_volt: Requested min voltage to the port partner + * @max_volt: Actual max voltage at the local port + * @req_max_volt: Requested max voltage to the port partner + * @max_curr: Actual max current at the local port + * @req_max_curr: Requested max current of the port partner + * @req_out_volt: Requested output voltage to the port partner + * @req_op_curr: Requested operating current to the port partner + * @supported: Parter has atleast one APDO hence supports PPS + * @active: PPS mode is active + */ struct pd_pps_data { u32 min_volt; + u32 req_min_volt; u32 max_volt; + u32 req_max_volt; u32 max_curr; - u32 out_volt; - u32 op_curr; + u32 req_max_curr; + u32 req_out_volt; + u32 req_op_curr; bool supported; bool active; }; @@ -2498,8 +2513,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; case SNK_NEGOTIATE_PPS_CAPABILITIES: /* Revert data back from any requested PPS updates */ - port->pps_data.out_volt = port->supply_voltage; - port->pps_data.op_curr = port->current_limit; + port->pps_data.req_out_volt = port->supply_voltage; + port->pps_data.req_op_curr = port->current_limit; port->pps_status = (type == PD_CTRL_WAIT ? -EAGAIN : -EOPNOTSUPP); @@ -2548,8 +2563,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; case SNK_NEGOTIATE_PPS_CAPABILITIES: port->pps_data.active = true; - port->req_supply_voltage = port->pps_data.out_volt; - port->req_current_limit = port->pps_data.op_curr; + port->pps_data.min_volt = port->pps_data.req_min_volt; + port->pps_data.max_volt = port->pps_data.req_max_volt; + port->pps_data.max_curr = port->pps_data.req_max_curr; + port->req_supply_voltage = port->pps_data.req_out_volt; + port->req_current_limit = port->pps_data.req_op_curr; tcpm_set_state(port, SNK_TRANSITION_SINK, 0); break; case SOFT_RESET_SEND: @@ -3108,16 +3126,16 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port) src = port->source_caps[src_pdo]; snk = port->snk_pdo[snk_pdo]; - port->pps_data.min_volt = max(pdo_pps_apdo_min_voltage(src), - pdo_pps_apdo_min_voltage(snk)); - port->pps_data.max_volt = min(pdo_pps_apdo_max_voltage(src), - pdo_pps_apdo_max_voltage(snk)); - port->pps_data.max_curr = min_pps_apdo_current(src, snk); - port->pps_data.out_volt = min(port->pps_data.max_volt, - max(port->pps_data.min_volt, - port->pps_data.out_volt)); - port->pps_data.op_curr = min(port->pps_data.max_curr, - port->pps_data.op_curr); + port->pps_data.req_min_volt = max(pdo_pps_apdo_min_voltage(src), + pdo_pps_apdo_min_voltage(snk)); + port->pps_data.req_max_volt = min(pdo_pps_apdo_max_voltage(src), + pdo_pps_apdo_max_voltage(snk)); + port->pps_data.req_max_curr = min_pps_apdo_current(src, snk); + port->pps_data.req_out_volt = min(port->pps_data.max_volt, + max(port->pps_data.min_volt, + port->pps_data.req_out_volt)); + port->pps_data.req_op_curr = min(port->pps_data.max_curr, + port->pps_data.req_op_curr); power_supply_changed(port->psy); } @@ -3245,10 +3263,10 @@ static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo) tcpm_log(port, "Invalid APDO selected!"); return -EINVAL; } - max_mv = port->pps_data.max_volt; - max_ma = port->pps_data.max_curr; - out_mv = port->pps_data.out_volt; - op_ma = port->pps_data.op_curr; + max_mv = port->pps_data.req_max_volt; + max_ma = port->pps_data.req_max_curr; + out_mv = port->pps_data.req_out_volt; + op_ma = port->pps_data.req_op_curr; break; default: tcpm_log(port, "Invalid PDO selected!"); @@ -3295,8 +3313,8 @@ static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo) tcpm_log(port, "Requesting APDO %d: %u mV, %u mA", src_pdo_index, out_mv, op_ma); - port->pps_data.op_curr = op_ma; - port->pps_data.out_volt = out_mv; + port->pps_data.req_op_curr = op_ma; + port->pps_data.req_out_volt = out_mv; return 0; } @@ -5429,7 +5447,7 @@ static int tcpm_try_role(struct typec_port *p, int role) return ret; } -static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) +static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 req_op_curr) { unsigned int target_mw; int ret; @@ -5447,12 +5465,12 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) goto port_unlock; } - if (op_curr > port->pps_data.max_curr) { + if (req_op_curr > port->pps_data.max_curr) { ret = -EINVAL; goto port_unlock; } - target_mw = (op_curr * port->pps_data.out_volt) / 1000; + target_mw = (req_op_curr * port->supply_voltage) / 1000; if (target_mw < port->operating_snk_mw) { ret = -EINVAL; goto port_unlock; @@ -5466,10 +5484,10 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) } /* Round down operating current to align with PPS valid steps */ - op_curr = op_curr - (op_curr % RDO_PROG_CURR_MA_STEP); + req_op_curr = req_op_curr - (req_op_curr % RDO_PROG_CURR_MA_STEP); reinit_completion(&port->pps_complete); - port->pps_data.op_curr = op_curr; + port->pps_data.req_op_curr = req_op_curr; port->pps_status = 0; port->pps_pending = true; mutex_unlock(&port->lock); @@ -5490,7 +5508,7 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr) return ret; } -static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) +static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 req_out_volt) { unsigned int target_mw; int ret; @@ -5508,13 +5526,13 @@ static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) goto port_unlock; } - if (out_volt < port->pps_data.min_volt || - out_volt > port->pps_data.max_volt) { + if (req_out_volt < port->pps_data.min_volt || + req_out_volt > port->pps_data.max_volt) { ret = -EINVAL; goto port_unlock; } - target_mw = (port->pps_data.op_curr * out_volt) / 1000; + target_mw = (port->current_limit * req_out_volt) / 1000; if (target_mw < port->operating_snk_mw) { ret = -EINVAL; goto port_unlock; @@ -5528,10 +5546,10 @@ static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt) } /* Round down output voltage to align with PPS valid steps */ - out_volt = out_volt - (out_volt % RDO_PROG_VOLT_MV_STEP); + req_out_volt = req_out_volt - (req_out_volt % RDO_PROG_VOLT_MV_STEP); reinit_completion(&port->pps_complete); - port->pps_data.out_volt = out_volt; + port->pps_data.req_out_volt = req_out_volt; port->pps_status = 0; port->pps_pending = true; mutex_unlock(&port->lock); @@ -5589,8 +5607,8 @@ static int tcpm_pps_activate(struct tcpm_port *port, bool activate) /* Trigger PPS request or move back to standard PDO contract */ if (activate) { - port->pps_data.out_volt = port->supply_voltage; - port->pps_data.op_curr = port->current_limit; + port->pps_data.req_out_volt = port->supply_voltage; + port->pps_data.req_op_curr = port->current_limit; } mutex_unlock(&port->lock);

3 years, 8 months

1
0
0 0

FAILED: patch "[PATCH] usb: typec: tcpm: Address incorrect values of tcpm psy for" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From f3dedafb8263ca4791a92a23f5230068f5bde008 Mon Sep 17 00:00:00 2001 From: Badhri Jagan Sridharan <badhri(a)google.com> Date: Wed, 7 Apr 2021 13:07:18 -0700 Subject: [PATCH] usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply tcpm_pd_build_request overwrites current_limit and supply_voltage even before port partner accepts the requests. This leaves stale values in current_limit and supply_voltage that get exported by "tcpm-source-psy-". Solving this problem by caching the request values of current limit/supply voltage in req_current_limit and req_supply_voltage. current_limit/supply_voltage gets updated once the port partner accepts the request. Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply") Signed-off-by: Badhri Jagan Sridharan <badhri(a)google.com> Cc: stable <stable(a)vger.kernel.org> Reviewed-by: Guenter Roeck <linux(a)roeck-us.net> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource(a)diasemi.com> Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> Link: https://lore.kernel.org/r/20210407200723.1914388-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index ca1fc77697fc..4ea4b30ae885 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -389,7 +389,10 @@ struct tcpm_port { unsigned int operating_snk_mw; bool update_sink_caps; - /* Requested current / voltage */ + /* Requested current / voltage to the port partner */ + u32 req_current_limit; + u32 req_supply_voltage; + /* Actual current / voltage limit of the local port */ u32 current_limit; u32 supply_voltage; @@ -2435,8 +2438,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, case SNK_TRANSITION_SINK: if (port->vbus_present) { tcpm_set_current_limit(port, - port->current_limit, - port->supply_voltage); + port->req_current_limit, + port->req_supply_voltage); port->explicit_contract = true; tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_PD, @@ -2545,8 +2548,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, break; case SNK_NEGOTIATE_PPS_CAPABILITIES: port->pps_data.active = true; - port->supply_voltage = port->pps_data.out_volt; - port->current_limit = port->pps_data.op_curr; + port->req_supply_voltage = port->pps_data.out_volt; + port->req_current_limit = port->pps_data.op_curr; tcpm_set_state(port, SNK_TRANSITION_SINK, 0); break; case SOFT_RESET_SEND: @@ -3195,8 +3198,8 @@ static int tcpm_pd_build_request(struct tcpm_port *port, u32 *rdo) flags & RDO_CAP_MISMATCH ? " [mismatch]" : ""); } - port->current_limit = ma; - port->supply_voltage = mv; + port->req_current_limit = ma; + port->req_supply_voltage = mv; return 0; }

3 years, 8 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2021