January 2020 - Linux-stable-mirror

[PATCH v3 01/12] drm/i915: Fix sha_text population code

by Sean Paul

From: Sean Paul <seanpaul(a)chromium.org> This patch fixes a few bugs: 1- We weren't taking into account sha_leftovers when adding multiple ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with the beginning of ksv[j] 2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was being placed on the wrong half of sha_text, overlapping the leftover ksv value 3- In the sha_leftovers == 2 case, we need to manually terminate the byte stream with 0x80 since the hardware doesn't have enough room to add it after writing M0 The upside is that all of the HDCP supported HDMI repeaters I could find on Amazon just strip HDCP anyways, so it turns out to be _really_ hard to hit any of these cases without an MST hub, which is not (yet) supported. Oh, and the sha_leftovers == 1 case works perfectly! Fixes: ee5e5e7a5e0f (drm/i915: Add HDCP framework + base implementation) Cc: Chris Wilson <chris(a)chris-wilson.co.uk> Cc: Ramalingam C <ramalingam.c(a)intel.com> Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Cc: Sean Paul <seanpaul(a)chromium.org> Cc: Jani Nikula <jani.nikula(a)linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Cc: intel-gfx(a)lists.freedesktop.org Cc: <stable(a)vger.kernel.org> # v4.17+ Reviewed-by: Ramalingam C <ramalingam.c(a)intel.com> Signed-off-by: Sean Paul <seanpaul(a)chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191203173638.94919-2-sean@p… #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20191212190230.188505-2-sean@… #v2 Changes in v2: -None Changes in v3: -None --- drivers/gpu/drm/i915/display/intel_hdcp.c | 25 +++++++++++++++++------ include/drm/drm_hdcp.h | 3 +++ 2 files changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c index 0fdbd39f6641..eaab9008feef 100644 --- a/drivers/gpu/drm/i915/display/intel_hdcp.c +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c @@ -335,8 +335,10 @@ int intel_hdcp_validate_v_prime(struct intel_connector *connector, /* Fill up the empty slots in sha_text and write it out */ sha_empty = sizeof(sha_text) - sha_leftovers; - for (j = 0; j < sha_empty; j++) - sha_text |= ksv[j] << ((sizeof(sha_text) - j - 1) * 8); + for (j = 0; j < sha_empty; j++) { + u8 off = ((sizeof(sha_text) - j - 1 - sha_leftovers) * 8); + sha_text |= ksv[j] << off; + } ret = intel_write_sha_text(dev_priv, sha_text); if (ret < 0) @@ -426,7 +428,7 @@ int intel_hdcp_validate_v_prime(struct intel_connector *connector, } else if (sha_leftovers == 2) { /* Write 32 bits of text */ I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); - sha_text |= bstatus[0] << 24 | bstatus[1] << 16; + sha_text |= bstatus[0] << 8 | bstatus[1]; ret = intel_write_sha_text(dev_priv, sha_text); if (ret < 0) return ret; @@ -440,16 +442,27 @@ int intel_hdcp_validate_v_prime(struct intel_connector *connector, return ret; sha_idx += sizeof(sha_text); } + + /* + * Terminate the SHA-1 stream by hand. For the other leftover + * cases this is appended by the hardware. + */ + I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); + sha_text = DRM_HDCP_SHA1_TERMINATOR << 24; + ret = intel_write_sha_text(dev_priv, sha_text); + if (ret < 0) + return ret; + sha_idx += sizeof(sha_text); } else if (sha_leftovers == 3) { - /* Write 32 bits of text */ + /* Write 32 bits of text (filled from LSB) */ I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); - sha_text |= bstatus[0] << 24; + sha_text |= bstatus[0]; ret = intel_write_sha_text(dev_priv, sha_text); if (ret < 0) return ret; sha_idx += sizeof(sha_text); - /* Write 8 bits of text, 24 bits of M0 */ + /* Write 8 bits of text (filled from LSB), 24 bits of M0 */ I915_WRITE(HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_8); ret = intel_write_sha_text(dev_priv, bstatus[1]); if (ret < 0) diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h index 06a11202a097..20498c822204 100644 --- a/include/drm/drm_hdcp.h +++ b/include/drm/drm_hdcp.h @@ -29,6 +29,9 @@ /* Slave address for the HDCP registers in the receiver */ #define DRM_HDCP_DDC_ADDR 0x3A +/* Value to use at the end of the SHA-1 bytestream used for repeaters */ +#define DRM_HDCP_SHA1_TERMINATOR 0x80 + /* HDCP register offsets for HDMI/DVI devices */ #define DRM_HDCP_DDC_BKSV 0x00 #define DRM_HDCP_DDC_RI_PRIME 0x08 -- Sean Paul, Software Engineer, Google / Chromium OS

4 years, 11 months

1
0
0 0

patch "USB: serial: keyspan: handle unbound ports" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: keyspan: handle unbound ports to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 3018dd3fa114b13261e9599ddb5656ef97a1fa17 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Fri, 17 Jan 2020 10:50:25 +0100 Subject: USB: serial: keyspan: handle unbound ports Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable(a)vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/keyspan.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index e66a59ef43a1..aa3dbce22cfb 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1058,6 +1058,8 @@ static void usa49_glocont_callback(struct urb *urb) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; p_priv = usb_get_serial_port_data(port); + if (!p_priv) + continue; if (p_priv->resend_cont) { dev_dbg(&port->dev, "%s - sending setup\n", __func__); @@ -1459,6 +1461,8 @@ static void usa67_glocont_callback(struct urb *urb) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; p_priv = usb_get_serial_port_data(port); + if (!p_priv) + continue; if (p_priv->resend_cont) { dev_dbg(&port->dev, "%s - sending setup\n", __func__); -- 2.25.0

4 years, 11 months

1
0
0 0

patch "USB: serial: quatech2: handle unbound ports" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: quatech2: handle unbound ports to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 9715a43eea77e42678a1002623f2d9a78f5b81a1 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Fri, 17 Jan 2020 15:35:26 +0100 Subject: USB: serial: quatech2: handle unbound ports Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe). Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable(a)vger.kernel.org> # 3.5 Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/quatech2.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index a62981ca7a73..f93b81a297d6 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -841,7 +841,10 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch) u8 newMSR = (u8) *ch; unsigned long flags; + /* May be called from qt2_process_read_urb() for an unbound port. */ port_priv = usb_get_serial_port_data(port); + if (!port_priv) + return; spin_lock_irqsave(&port_priv->lock, flags); port_priv->shadowMSR = newMSR; @@ -869,7 +872,10 @@ static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch) unsigned long flags; u8 newLSR = (u8) *ch; + /* May be called from qt2_process_read_urb() for an unbound port. */ port_priv = usb_get_serial_port_data(port); + if (!port_priv) + return; if (newLSR & UART_LSR_BI) newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI); -- 2.25.0

4 years, 11 months

1
0
0 0

patch "USB: serial: io_edgeport: handle unbound ports on URB completion" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: io_edgeport: handle unbound ports on URB completion to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From e37d1aeda737a20b1846a91a3da3f8b0f00cf690 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Fri, 17 Jan 2020 10:50:23 +0100 Subject: USB: serial: io_edgeport: handle unbound ports on URB completion Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable(a)vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/io_edgeport.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 9690a5f4b9d6..0582d78bdb1d 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -716,7 +716,7 @@ static void edge_interrupt_callback(struct urb *urb) if (txCredits) { port = edge_serial->serial->port[portNumber]; edge_port = usb_get_serial_port_data(port); - if (edge_port->open) { + if (edge_port && edge_port->open) { spin_lock_irqsave(&edge_port->ep_lock, flags); edge_port->txCredits += txCredits; @@ -1825,7 +1825,7 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, port = edge_serial->serial->port[ edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); - if (edge_port->open) { + if (edge_port && edge_port->open) { dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", __func__, rxLen, edge_serial->rxPort); -- 2.25.0

4 years, 11 months

1
0
0 0

patch "USB: serial: io_edgeport: add missing active-port sanity check" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: io_edgeport: add missing active-port sanity check to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 1568c58d11a7c851bd09341aeefd6a1c308ac40d Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Fri, 17 Jan 2020 10:50:24 +0100 Subject: USB: serial: io_edgeport: add missing active-port sanity check The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable(a)vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/io_edgeport.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 0582d78bdb1d..5737add6a2a4 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1725,7 +1725,8 @@ static void edge_break(struct tty_struct *tty, int break_state) static void process_rcvd_data(struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength) { - struct device *dev = &edge_serial->serial->dev->dev; + struct usb_serial *serial = edge_serial->serial; + struct device *dev = &serial->dev->dev; struct usb_serial_port *port; struct edgeport_port *edge_port; __u16 lastBufferLength; @@ -1821,9 +1822,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, /* spit this data back into the tty driver if this port is open */ - if (rxLen) { - port = edge_serial->serial->port[ - edge_serial->rxPort]; + if (rxLen && edge_serial->rxPort < serial->num_ports) { + port = serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port && edge_port->open) { dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", @@ -1833,8 +1833,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial, rxLen); edge_port->port->icount.rx += rxLen; } - buffer += rxLen; } + buffer += rxLen; break; case EXPECT_HDR3: /* Expect 3rd byte of status header */ @@ -1869,6 +1869,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, __u8 code = edge_serial->rxStatusCode; /* switch the port pointer to the one being currently talked about */ + if (edge_serial->rxPort >= edge_serial->serial->num_ports) + return; port = edge_serial->serial->port[edge_serial->rxPort]; edge_port = usb_get_serial_port_data(port); if (edge_port == NULL) { -- 2.25.0

4 years, 11 months

1
0
0 0

patch "USB: serial: option: add support for Quectel RM500Q in QDL mode" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: option: add support for Quectel RM500Q in QDL mode to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From f3eaabbfd093c93d791eb930cc68d9b15246a65e Mon Sep 17 00:00:00 2001 From: Reinhard Speyerer <rspmn(a)arcor.de> Date: Tue, 14 Jan 2020 14:29:23 +0100 Subject: USB: serial: option: add support for Quectel RM500Q in QDL mode Add support for Quectel RM500Q in QDL mode. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 24 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 0.00 S: Manufacturer=Qualcomm CDMA Technologies MSM S: Product=QUSB_BULK_SN:xxxxxxxx S: SerialNumber=xxxxxxxx C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is assumed that the ZLP flag required for other Qualcomm-based 5G devices also applies to Quectel RM500Q. Signed-off-by: Reinhard Speyerer <rspmn(a)arcor.de> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 62bad1b2c18e..084cc2fff3ae 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1107,6 +1107,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10), + .driver_info = ZLP }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, -- 2.25.0

4 years, 11 months

1
0
0 0

patch "USB: serial: ch341: handle unbound port at reset_resume" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: ch341: handle unbound port at reset_resume to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 4d5ef53f75c22d28f490bcc5c771fcc610a9afa4 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Fri, 17 Jan 2020 10:50:22 +0100 Subject: USB: serial: ch341: handle unbound port at reset_resume Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe). Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable <stable(a)vger.kernel.org> # 2.6.30 Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/ch341.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index df582fe855f0..d3f420f3a083 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -642,9 +642,13 @@ static int ch341_tiocmget(struct tty_struct *tty) static int ch341_reset_resume(struct usb_serial *serial) { struct usb_serial_port *port = serial->port[0]; - struct ch341_private *priv = usb_get_serial_port_data(port); + struct ch341_private *priv; int ret; + priv = usb_get_serial_port_data(port); + if (!priv) + return 0; + /* reconfigure ch341 serial port after bus-reset */ ch341_configure(serial->dev, priv); -- 2.25.0

4 years, 11 months

1
0
0 0

patch "USB: serial: suppress driver bind attributes" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: suppress driver bind attributes to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From fdb838efa31e1ed9a13ae6ad0b64e30fdbd00570 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Thu, 16 Jan 2020 17:07:05 +0100 Subject: USB: serial: suppress driver bind attributes USB-serial drivers must not be unbound from their ports before the corresponding USB driver is unbound from the parent interface so suppress the bind and unbind attributes. Unbinding a serial driver while it's port is open is a sure way to trigger a crash as any driver state is released on unbind while port hangup is handled on the parent USB interface level. Drivers for multiport devices where ports share a resource such as an interrupt endpoint also generally cannot handle individual ports going away. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable(a)vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/usb-serial.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 8f066bb55d7d..dc7a65b9ec98 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1317,6 +1317,9 @@ static int usb_serial_register(struct usb_serial_driver *driver) return -EINVAL; } + /* Prevent individual ports from being unbound. */ + driver->driver.suppress_bind_attrs = true; + usb_serial_operations_init(driver); /* Add this device to our list of devices */ -- 2.25.0

4 years, 11 months

1
0
0 0

patch "USB: serial: opticon: fix control-message timeouts" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: opticon: fix control-message timeouts to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 5e28055f340275a8616eee88ef19186631b4d136 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Mon, 13 Jan 2020 18:22:13 +0100 Subject: USB: serial: opticon: fix control-message timeouts The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on open() or tiocmset() due to a malfunctioning (or malicious) device until the device is physically disconnected. The USB upper limit of five seconds per request should be more than enough. Fixes: 309a057932ab ("USB: opticon: add rts and cts support") Cc: stable <stable(a)vger.kernel.org> # 2.6.39 Cc: Martin Jansen <martin.jansen(a)opticon.com> Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/opticon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index cb7aac9cd9e7..ed2b4e6dca38 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -113,7 +113,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype, retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), requesttype, USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, - 0, 0, buffer, 1, 0); + 0, 0, buffer, 1, USB_CTRL_SET_TIMEOUT); kfree(buffer); if (retval < 0) -- 2.25.0

4 years, 11 months

1
0
0 0

patch "USB: serial: option: Add support for Quectel RM500Q" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: option: Add support for Quectel RM500Q to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From accf227de4d211b52c830a58b2df00d5739f2389 Mon Sep 17 00:00:00 2001 From: Kristian Evensen <kristian.evensen(a)gmail.com> Date: Mon, 13 Jan 2020 15:14:05 +0100 Subject: USB: serial: option: Add support for Quectel RM500Q RM500Q is a 5G module from Quectel, supporting both standalone and non-standalone modes. Unlike other recent Quectel modems, it is possible to identify the diagnostic interface (bInterfaceProtocol is unique). Thus, there is no need to check for the number of endpoints or reserve interfaces. The interface number is still dynamic though, so matching on interface number is not possible and two entries have to be added to the table. Output from usb-devices with all interfaces enabled (order is diag, nmea, at_port, modem, rmnet and adb): Bus 004 Device 007: ID 2c7c:0800 Quectel Wireless Solutions Co., Ltd. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2c7c Quectel Wireless Solutions Co., Ltd. idProduct 0x0800 bcdDevice 4.14 iManufacturer 1 Quectel iProduct 2 LTE-A Module iSerial 3 40046d60 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 328 bNumInterfaces 6 bConfigurationValue 1 iConfiguration 4 DIAG_SER_RMNET bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 224mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 5 CDEV Serial Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 6 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 42 bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x00000006 Link Power Management (LPM) Supported SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000f Device can operate at Low Speed (1Mbps) Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 1 micro seconds bU2DevExitLat 500 micro seconds ** UNRECOGNIZED: 14 10 0a 00 01 00 00 00 00 11 00 00 30 40 0a 00 b0 40 0a 00 Device Status: 0x0000 (Bus Powered) Signed-off-by: Kristian Evensen <kristian.evensen(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2d919d0e6e45..62bad1b2c18e 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -248,6 +248,7 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_BG96 0x0296 #define QUECTEL_PRODUCT_EP06 0x0306 #define QUECTEL_PRODUCT_EM12 0x0512 +#define QUECTEL_PRODUCT_RM500Q 0x0800 #define CMOTECH_VENDOR_ID 0x16d8 #define CMOTECH_PRODUCT_6001 0x6001 @@ -1104,6 +1105,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff), .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), -- 2.25.0

4 years, 11 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror January 2020