May 2018 - Linux-stable-mirror

FAILED: patch "[PATCH] tracing: Fix bad use of igrab in trace_uprobe.c" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 0c92c7a3c5d416f47b32c5f20a611dfeca5d5f2e Mon Sep 17 00:00:00 2001 From: Song Liu <songliubraving(a)fb.com> Date: Mon, 23 Apr 2018 10:21:34 -0700 Subject: [PATCH] tracing: Fix bad use of igrab in trace_uprobe.c As Miklos reported and suggested: This pattern repeats two times in trace_uprobe.c and in kernel/events/core.c as well: ret = kern_path(filename, LOOKUP_FOLLOW, &path); if (ret) goto fail_address_parse; inode = igrab(d_inode(path.dentry)); path_put(&path); And it's wrong. You can only hold a reference to the inode if you have an active ref to the superblock as well (which is normally through path.mnt) or holding s_umount. This way unmounting the containing filesystem while the tracepoint is active will give you the "VFS: Busy inodes after unmount..." message and a crash when the inode is finally put. Solution: store path instead of inode. This patch fixes two instances in trace_uprobe.c. struct path is added to struct trace_uprobe to keep the inode and containing mount point referenced. Link: http://lkml.kernel.org/r/20180423172135.4050588-1-songliubraving@fb.com Fixes: f3f096cfedf8 ("tracing: Provide trace events interface for uprobes") Fixes: 33ea4b24277b ("perf/core: Implement the 'perf_uprobe' PMU") Cc: stable(a)vger.kernel.org Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Howard McLauchlan <hmclauchlan(a)fb.com> Cc: Josef Bacik <jbacik(a)fb.com> Cc: Srikar Dronamraju <srikar(a)linux.vnet.ibm.com> Acked-by: Miklos Szeredi <mszeredi(a)redhat.com> Reported-by: Miklos Szeredi <miklos(a)szeredi.hu> Signed-off-by: Song Liu <songliubraving(a)fb.com> Signed-off-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org> diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c index 34fd0e0ec51d..ac892878dbe6 100644 --- a/kernel/trace/trace_uprobe.c +++ b/kernel/trace/trace_uprobe.c @@ -55,6 +55,7 @@ struct trace_uprobe { struct list_head list; struct trace_uprobe_filter filter; struct uprobe_consumer consumer; + struct path path; struct inode *inode; char *filename; unsigned long offset; @@ -289,7 +290,7 @@ static void free_trace_uprobe(struct trace_uprobe *tu) for (i = 0; i < tu->tp.nr_args; i++) traceprobe_free_probe_arg(&tu->tp.args[i]); - iput(tu->inode); + path_put(&tu->path); kfree(tu->tp.call.class->system); kfree(tu->tp.call.name); kfree(tu->filename); @@ -363,7 +364,6 @@ static int register_trace_uprobe(struct trace_uprobe *tu) static int create_trace_uprobe(int argc, char **argv) { struct trace_uprobe *tu; - struct inode *inode; char *arg, *event, *group, *filename; char buf[MAX_EVENT_NAME_LEN]; struct path path; @@ -371,7 +371,6 @@ static int create_trace_uprobe(int argc, char **argv) bool is_delete, is_return; int i, ret; - inode = NULL; ret = 0; is_delete = false; is_return = false; @@ -437,21 +436,16 @@ static int create_trace_uprobe(int argc, char **argv) } /* Find the last occurrence, in case the path contains ':' too. */ arg = strrchr(argv[1], ':'); - if (!arg) { - ret = -EINVAL; - goto fail_address_parse; - } + if (!arg) + return -EINVAL; *arg++ = '\0'; filename = argv[1]; ret = kern_path(filename, LOOKUP_FOLLOW, &path); if (ret) - goto fail_address_parse; - - inode = igrab(d_real_inode(path.dentry)); - path_put(&path); + return ret; - if (!inode || !S_ISREG(inode->i_mode)) { + if (!d_is_reg(path.dentry)) { ret = -EINVAL; goto fail_address_parse; } @@ -490,7 +484,7 @@ static int create_trace_uprobe(int argc, char **argv) goto fail_address_parse; } tu->offset = offset; - tu->inode = inode; + tu->path = path; tu->filename = kstrdup(filename, GFP_KERNEL); if (!tu->filename) { @@ -558,7 +552,7 @@ static int create_trace_uprobe(int argc, char **argv) return ret; fail_address_parse: - iput(inode); + path_put(&path); pr_info("Failed to parse address or file.\n"); @@ -922,6 +916,7 @@ probe_event_enable(struct trace_uprobe *tu, struct trace_event_file *file, goto err_flags; tu->consumer.filter = filter; + tu->inode = d_real_inode(tu->path.dentry); ret = uprobe_register(tu->inode, tu->offset, &tu->consumer); if (ret) goto err_buffer; @@ -967,6 +962,7 @@ probe_event_disable(struct trace_uprobe *tu, struct trace_event_file *file) WARN_ON(!uprobe_filter_is_empty(&tu->filter)); uprobe_unregister(tu->inode, tu->offset, &tu->consumer); + tu->inode = NULL; tu->tp.flags &= file ? ~TP_FLAG_TRACE : ~TP_FLAG_PROFILE; uprobe_buffer_disable(); @@ -1337,7 +1333,6 @@ struct trace_event_call * create_local_trace_uprobe(char *name, unsigned long offs, bool is_return) { struct trace_uprobe *tu; - struct inode *inode; struct path path; int ret; @@ -1345,11 +1340,8 @@ create_local_trace_uprobe(char *name, unsigned long offs, bool is_return) if (ret) return ERR_PTR(ret); - inode = igrab(d_inode(path.dentry)); - path_put(&path); - - if (!inode || !S_ISREG(inode->i_mode)) { - iput(inode); + if (!d_is_reg(path.dentry)) { + path_put(&path); return ERR_PTR(-EINVAL); } @@ -1364,11 +1356,12 @@ create_local_trace_uprobe(char *name, unsigned long offs, bool is_return) if (IS_ERR(tu)) { pr_info("Failed to allocate trace_uprobe.(%d)\n", (int)PTR_ERR(tu)); + path_put(&path); return ERR_CAST(tu); } tu->offset = offs; - tu->inode = inode; + tu->path = path; tu->filename = kstrdup(name, GFP_KERNEL); init_trace_event_call(tu, &tu->tp.call);

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] tracing: Fix bad use of igrab in trace_uprobe.c" failed to apply to 4.16-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.16-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 0c92c7a3c5d416f47b32c5f20a611dfeca5d5f2e Mon Sep 17 00:00:00 2001 From: Song Liu <songliubraving(a)fb.com> Date: Mon, 23 Apr 2018 10:21:34 -0700 Subject: [PATCH] tracing: Fix bad use of igrab in trace_uprobe.c As Miklos reported and suggested: This pattern repeats two times in trace_uprobe.c and in kernel/events/core.c as well: ret = kern_path(filename, LOOKUP_FOLLOW, &path); if (ret) goto fail_address_parse; inode = igrab(d_inode(path.dentry)); path_put(&path); And it's wrong. You can only hold a reference to the inode if you have an active ref to the superblock as well (which is normally through path.mnt) or holding s_umount. This way unmounting the containing filesystem while the tracepoint is active will give you the "VFS: Busy inodes after unmount..." message and a crash when the inode is finally put. Solution: store path instead of inode. This patch fixes two instances in trace_uprobe.c. struct path is added to struct trace_uprobe to keep the inode and containing mount point referenced. Link: http://lkml.kernel.org/r/20180423172135.4050588-1-songliubraving@fb.com Fixes: f3f096cfedf8 ("tracing: Provide trace events interface for uprobes") Fixes: 33ea4b24277b ("perf/core: Implement the 'perf_uprobe' PMU") Cc: stable(a)vger.kernel.org Cc: Ingo Molnar <mingo(a)redhat.com> Cc: Howard McLauchlan <hmclauchlan(a)fb.com> Cc: Josef Bacik <jbacik(a)fb.com> Cc: Srikar Dronamraju <srikar(a)linux.vnet.ibm.com> Acked-by: Miklos Szeredi <mszeredi(a)redhat.com> Reported-by: Miklos Szeredi <miklos(a)szeredi.hu> Signed-off-by: Song Liu <songliubraving(a)fb.com> Signed-off-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org> diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c index 34fd0e0ec51d..ac892878dbe6 100644 --- a/kernel/trace/trace_uprobe.c +++ b/kernel/trace/trace_uprobe.c @@ -55,6 +55,7 @@ struct trace_uprobe { struct list_head list; struct trace_uprobe_filter filter; struct uprobe_consumer consumer; + struct path path; struct inode *inode; char *filename; unsigned long offset; @@ -289,7 +290,7 @@ static void free_trace_uprobe(struct trace_uprobe *tu) for (i = 0; i < tu->tp.nr_args; i++) traceprobe_free_probe_arg(&tu->tp.args[i]); - iput(tu->inode); + path_put(&tu->path); kfree(tu->tp.call.class->system); kfree(tu->tp.call.name); kfree(tu->filename); @@ -363,7 +364,6 @@ static int register_trace_uprobe(struct trace_uprobe *tu) static int create_trace_uprobe(int argc, char **argv) { struct trace_uprobe *tu; - struct inode *inode; char *arg, *event, *group, *filename; char buf[MAX_EVENT_NAME_LEN]; struct path path; @@ -371,7 +371,6 @@ static int create_trace_uprobe(int argc, char **argv) bool is_delete, is_return; int i, ret; - inode = NULL; ret = 0; is_delete = false; is_return = false; @@ -437,21 +436,16 @@ static int create_trace_uprobe(int argc, char **argv) } /* Find the last occurrence, in case the path contains ':' too. */ arg = strrchr(argv[1], ':'); - if (!arg) { - ret = -EINVAL; - goto fail_address_parse; - } + if (!arg) + return -EINVAL; *arg++ = '\0'; filename = argv[1]; ret = kern_path(filename, LOOKUP_FOLLOW, &path); if (ret) - goto fail_address_parse; - - inode = igrab(d_real_inode(path.dentry)); - path_put(&path); + return ret; - if (!inode || !S_ISREG(inode->i_mode)) { + if (!d_is_reg(path.dentry)) { ret = -EINVAL; goto fail_address_parse; } @@ -490,7 +484,7 @@ static int create_trace_uprobe(int argc, char **argv) goto fail_address_parse; } tu->offset = offset; - tu->inode = inode; + tu->path = path; tu->filename = kstrdup(filename, GFP_KERNEL); if (!tu->filename) { @@ -558,7 +552,7 @@ static int create_trace_uprobe(int argc, char **argv) return ret; fail_address_parse: - iput(inode); + path_put(&path); pr_info("Failed to parse address or file.\n"); @@ -922,6 +916,7 @@ probe_event_enable(struct trace_uprobe *tu, struct trace_event_file *file, goto err_flags; tu->consumer.filter = filter; + tu->inode = d_real_inode(tu->path.dentry); ret = uprobe_register(tu->inode, tu->offset, &tu->consumer); if (ret) goto err_buffer; @@ -967,6 +962,7 @@ probe_event_disable(struct trace_uprobe *tu, struct trace_event_file *file) WARN_ON(!uprobe_filter_is_empty(&tu->filter)); uprobe_unregister(tu->inode, tu->offset, &tu->consumer); + tu->inode = NULL; tu->tp.flags &= file ? ~TP_FLAG_TRACE : ~TP_FLAG_PROFILE; uprobe_buffer_disable(); @@ -1337,7 +1333,6 @@ struct trace_event_call * create_local_trace_uprobe(char *name, unsigned long offs, bool is_return) { struct trace_uprobe *tu; - struct inode *inode; struct path path; int ret; @@ -1345,11 +1340,8 @@ create_local_trace_uprobe(char *name, unsigned long offs, bool is_return) if (ret) return ERR_PTR(ret); - inode = igrab(d_inode(path.dentry)); - path_put(&path); - - if (!inode || !S_ISREG(inode->i_mode)) { - iput(inode); + if (!d_is_reg(path.dentry)) { + path_put(&path); return ERR_PTR(-EINVAL); } @@ -1364,11 +1356,12 @@ create_local_trace_uprobe(char *name, unsigned long offs, bool is_return) if (IS_ERR(tu)) { pr_info("Failed to allocate trace_uprobe.(%d)\n", (int)PTR_ERR(tu)); + path_put(&path); return ERR_CAST(tu); } tu->offset = offs; - tu->inode = inode; + tu->path = path; tu->filename = kstrdup(name, GFP_KERNEL); init_trace_event_call(tu, &tu->tp.call);

6 years, 7 months

1
0
0 0

FAILED: patch "[PATCH] errseq: Always report a writeback error once" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b4678df184b314a2bd47d2329feca2c2534aa12b Mon Sep 17 00:00:00 2001 From: Matthew Wilcox <willy(a)infradead.org> Date: Tue, 24 Apr 2018 14:02:57 -0700 Subject: [PATCH] errseq: Always report a writeback error once The errseq_t infrastructure assumes that errors which occurred before the file descriptor was opened are of no interest to the application. This turns out to be a regression for some applications, notably Postgres. Before errseq_t, a writeback error would be reported exactly once (as long as the inode remained in memory), so Postgres could open a file, call fsync() and find out whether there had been a writeback error on that file from another process. This patch changes the errseq infrastructure to report errors to all file descriptors which are opened after the error occurred, but before it was reported to any file descriptor. This restores the user-visible behaviour. Cc: stable(a)vger.kernel.org Fixes: 5660e13d2fd6 ("fs: new infrastructure for writeback error handling and reporting") Signed-off-by: Matthew Wilcox <mawilcox(a)microsoft.com> Reviewed-by: Jeff Layton <jlayton(a)kernel.org> Signed-off-by: Jeff Layton <jlayton(a)redhat.com> diff --git a/lib/errseq.c b/lib/errseq.c index df782418b333..81f9e33aa7e7 100644 --- a/lib/errseq.c +++ b/lib/errseq.c @@ -111,27 +111,22 @@ EXPORT_SYMBOL(errseq_set); * errseq_sample() - Grab current errseq_t value. * @eseq: Pointer to errseq_t to be sampled. * - * This function allows callers to sample an errseq_t value, marking it as - * "seen" if required. + * This function allows callers to initialise their errseq_t variable. + * If the error has been "seen", new callers will not see an old error. + * If there is an unseen error in @eseq, the caller of this function will + * see it the next time it checks for an error. * + * Context: Any context. * Return: The current errseq value. */ errseq_t errseq_sample(errseq_t *eseq) { errseq_t old = READ_ONCE(*eseq); - errseq_t new = old; - /* - * For the common case of no errors ever having been set, we can skip - * marking the SEEN bit. Once an error has been set, the value will - * never go back to zero. - */ - if (old != 0) { - new |= ERRSEQ_SEEN; - if (old != new) - cmpxchg(eseq, old, new); - } - return new; + /* If nobody has seen this error yet, then we can be the first. */ + if (!(old & ERRSEQ_SEEN)) + old = 0; + return old; } EXPORT_SYMBOL(errseq_sample);

6 years, 7 months

1
0
0 0

EOL for the 3.2 kernel?

by Charlemagne Lasse

Hi, will there be an announcement that Linux 3.2 is EOL or will there be another release which announces it as the last release of this stable series? The kernel release page https://www.kernel.org/category/releases.html lists it as EOL for this month. Charlemagne

6 years, 7 months

2
1
0 0

[git:media_tree/master] media: cx231xx: Ignore an i2c mux adapter

by Mauro Carvalho Chehab

This is an automatic generated email to let you know that the following patch were queued: Subject: media: cx231xx: Ignore an i2c mux adapter Author: Brad Love <brad(a)nextdimension.cc> Date: Thu May 3 17:20:10 2018 -0400 Hauppauge 935C cannot communicate with the si2157 when using the mux adapter returned by the si2168, so disable it to fix the device. Signed-off-by: Brad Love <brad(a)nextdimension.cc> Cc: stable(a)vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung(a)kernel.org> drivers/media/usb/cx231xx/cx231xx-dvb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- diff --git a/drivers/media/usb/cx231xx/cx231xx-dvb.c b/drivers/media/usb/cx231xx/cx231xx-dvb.c index 18be20ba8309..86c33f5ff1a3 100644 --- a/drivers/media/usb/cx231xx/cx231xx-dvb.c +++ b/drivers/media/usb/cx231xx/cx231xx-dvb.c @@ -1150,7 +1150,7 @@ static int dvb_init(struct cx231xx *dev) info.platform_data = &si2157_config; request_module("si2157"); - client = i2c_new_device(adapter, &info); + client = i2c_new_device(tuner_i2c, &info); if (client == NULL || client->dev.driver == NULL) { module_put(dvb->i2c_client_demod[0]->dev.driver->owner); i2c_unregister_device(dvb->i2c_client_demod[0]);

6 years, 7 months

1
0
0 0

[PATCH] [stable] arm64: Add work around for Arm Cortex-A55 Erratum 1024718

by Suzuki K Poulose

commit ece1397cbc89c51914fae1aec729539cfd8bd62b upstream Some variants of the Arm Cortex-55 cores (r0p0, r0p1, r1p0) suffer from an erratum 1024718, which causes incorrect updates when DBM/AP bits in a page table entry is modified without a break-before-make sequence. The work around is to disable the hardware DBM feature on the affected cores. The hardware Access Flag management features is not affected. The hardware DBM feature is a non-conflicting capability, i.e, the kernel could handle cores using the feature and those without having the features running at the same time. So this work around is detected at early boot time, rather than delaying it until the CPUs are brought up into the kernel with MMU turned on. This also avoids other complexities with late CPUs turning online, with or without the hardware DBM features. Note: The upstream commit is on top of a reworked capability infrastructure for arm64 heterogeneous systems, which allows handling this later in the boot process. This backport is based on the original version of the patch [0]. Folded the 3 patches into this single commit, removing the unncessary bits. [0] https://lkml.kernel.org/r/20180116102323.3470-1-suzuki.poulose@arm.com Cc: stable(a)vger.kernel.org # v4.3 to v4.16 Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Mark Rutland <mark.rutland(a)arm.com> Cc: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> --- Documentation/arm64/silicon-errata.txt | 1 + arch/arm64/Kconfig | 14 ++++++++++++ arch/arm64/include/asm/assembler.h | 40 ++++++++++++++++++++++++++++++++++ arch/arm64/include/asm/cputype.h | 2 ++ arch/arm64/mm/proc.S | 5 +++++ 5 files changed, 62 insertions(+) diff --git a/Documentation/arm64/silicon-errata.txt b/Documentation/arm64/silicon-errata.txt index c1d520d..3b2f2dd 100644 --- a/Documentation/arm64/silicon-errata.txt +++ b/Documentation/arm64/silicon-errata.txt @@ -55,6 +55,7 @@ stable kernels. | ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 | | ARM | Cortex-A72 | #853709 | N/A | | ARM | Cortex-A73 | #858921 | ARM64_ERRATUM_858921 | +| ARM | Cortex-A55 | #1024718 | ARM64_ERRATUM_1024718 | | ARM | MMU-500 | #841119,#826419 | N/A | | | | | | | Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 | diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 7381eeb..be66576 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -464,6 +464,20 @@ config ARM64_ERRATUM_843419 If unsure, say Y. +config ARM64_ERRATUM_1024718 + bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update" + default y + help + This option adds work around for Arm Cortex-A55 Erratum 1024718. + + Affected Cortex-A55 cores (r0p0, r0p1, r1p0) could cause incorrect + update of the hardware dirty bit when the DBM/AP bits are updated + without a break-before-make. The work around is to disable the usage + of hardware DBM locally on the affected cores. CPUs not affected by + erratum will continue to use the feature. + + If unsure, say Y. + config CAVIUM_ERRATUM_22375 bool "Cavium erratum 22375, 24313" default y diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 3c78835..a3ca19e 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -25,6 +25,7 @@ #include <asm/asm-offsets.h> #include <asm/cpufeature.h> +#include <asm/cputype.h> #include <asm/debug-monitors.h> #include <asm/page.h> #include <asm/pgtable-hwdef.h> @@ -595,4 +596,43 @@ USER(\label, ic ivau, \tmp2) // invalidate I line PoU #endif .endm +/* + * Check the MIDR_EL1 of the current CPU for a given model and a range of + * variant/revision. See asm/cputype.h for the macros used below. + * + * model: MIDR_CPU_MODEL of CPU + * rv_min: Minimum of MIDR_CPU_VAR_REV() + * rv_max: Maximum of MIDR_CPU_VAR_REV() + * res: Result register. + * tmp1, tmp2, tmp3: Temporary registers + * + * Corrupts: res, tmp1, tmp2, tmp3 + * Returns: 0, if the CPU id doesn't match. Non-zero otherwise + */ + .macro cpu_midr_match model, rv_min, rv_max, res, tmp1, tmp2, tmp3 + mrs \res, midr_el1 + mov_q \tmp1, (MIDR_REVISION_MASK | MIDR_VARIANT_MASK) + mov_q \tmp2, MIDR_CPU_MODEL_MASK + and \tmp3, \res, \tmp2 // Extract model + and \tmp1, \res, \tmp1 // rev & variant + mov_q \tmp2, \model + cmp \tmp3, \tmp2 + cset \res, eq + cbz \res, .Ldone\@ // Model matches ? + + .if (\rv_min != 0) // Skip min check if rv_min == 0 + mov_q \tmp3, \rv_min + cmp \tmp1, \tmp3 + cset \res, ge + .endif // \rv_min != 0 + /* Skip rv_max check if rv_min == rv_max && rv_min != 0 */ + .if ((\rv_min != \rv_max) || \rv_min == 0) + mov_q \tmp2, \rv_max + cmp \tmp1, \tmp2 + cset \tmp2, le + and \res, \res, \tmp2 + .endif +.Ldone\@: + .endm + #endif /* __ASM_ASSEMBLER_H */ diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 350c76a..8e32a6f 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -83,6 +83,7 @@ #define ARM_CPU_PART_CORTEX_A53 0xD03 #define ARM_CPU_PART_CORTEX_A73 0xD09 #define ARM_CPU_PART_CORTEX_A75 0xD0A +#define ARM_CPU_PART_CORTEX_A55 0xD05 #define APM_CPU_PART_POTENZA 0x000 @@ -102,6 +103,7 @@ #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72) #define MIDR_CORTEX_A73 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A73) #define MIDR_CORTEX_A75 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A75) +#define MIDR_CORTEX_A55 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A55) #define MIDR_THUNDERX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX) #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX) #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX) diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index c0af476..5244440 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -448,6 +448,11 @@ ENTRY(__cpu_setup) cbz x9, 2f cmp x9, #2 b.lt 1f +#ifdef CONFIG_ARM64_ERRATUM_1024718 + /* Disable hardware DBM on Cortex-A55 r0p0, r0p1 & r1p0 */ + cpu_midr_match MIDR_CORTEX_A55, MIDR_CPU_VAR_REV(0, 0), MIDR_CPU_VAR_REV(1, 0), x1, x2, x3, x4 + cbnz x1, 1f +#endif orr x10, x10, #TCR_HD // hardware Dirty flag update 1: orr x10, x10, #TCR_HA // hardware Access flag update 2: -- 2.7.4

6 years, 7 months

2
2
0 0

Build problems in stable queue

by Guenter Roeck

Couple of powerpc problems. 4.14, 4.16: drivers/net/ethernet/ibm/ibmvnic.c:1460:10: error: 'struct ibmvnic_tx_buff' has no member named 'num_entries' 3.18, 4.4: arch/powerpc/xmon/xmon.c:1180:7: error: 'xmon_on' undeclared Also, {i386,x86_64}:allnoconfig in 3.18: arch/x86/mm/pageattr.c:281:6: error: ‘kernel_set_to_readonly’ undeclared Most boot tests pass, except for a couple of powerpc tests where the image fails to build. Guenter

6 years, 7 months

2
6
0 0

Applied "ASoC: cs35l35: Add use_single_rw to regmap config" to the asoc tree

by Mark Brown

The patch ASoC: cs35l35: Add use_single_rw to regmap config has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 6a6ad7face95af0b9e6aaf1eb2261eb70240b89b Mon Sep 17 00:00:00 2001 From: Paul Handrigan <Paul.Handrigan(a)cirrus.com> Date: Fri, 4 May 2018 16:37:41 -0500 Subject: [PATCH] ASoC: cs35l35: Add use_single_rw to regmap config Add the use_single_rw flag to regmap config since the device does not support bulk transactions over i2c. Signed-off-by: Paul Handrigan <Paul.Handrigan(a)cirrus.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org --- sound/soc/codecs/cs35l35.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/cs35l35.c b/sound/soc/codecs/cs35l35.c index a4a2cb171bdf..bd6226bde45f 100644 --- a/sound/soc/codecs/cs35l35.c +++ b/sound/soc/codecs/cs35l35.c @@ -1105,6 +1105,7 @@ static struct regmap_config cs35l35_regmap = { .readable_reg = cs35l35_readable_register, .precious_reg = cs35l35_precious_register, .cache_type = REGCACHE_RBTREE, + .use_single_rw = true, }; static irqreturn_t cs35l35_irq(int irq, void *data) -- 2.17.0

6 years, 7 months

1
0
0 0

USB: serial: option: Add support for Quectel EP06

by Bjørn Mork

Hello, Please add upstream commit 71a0483d56e7 ("USB: serial: option: Add support for Quectel EP06") to all maintained stable branches. Thanks, Bjørn

6 years, 7 months

2
1
0 0

v4.4-stable: GPMI nand controller broken

by Sascha Hauer

The following went into v4.4.120: 197190bc5c48 mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM This patch was backported to far for the stable tree. It only makes sense (and only works) together with: bd2e778c9ee3 gpmi-nand: Handle ECC Errors in erased pages which first appeared in v4.7. So either we revert 197190bc5c48 on the v4.4 stable tree or we apply the attached patch which is a backport of bd2e778c9ee3 for v4.4. I don't know which solution is prefered, personally I would prefer applying the attached patch which is also a bugfix. Without it erased pages may not be handled properly. Sascha ---------------------------8<------------------------------- >From ec42023a83778e524a024bdd25d970b8dc7a3966 Mon Sep 17 00:00:00 2001 From: Markus Pargmann <mpa(a)pengutronix.de> Date: Mon, 25 Apr 2016 14:35:12 +0200 Subject: [PATCH] gpmi-nand: Handle ECC Errors in erased pages ECC is only calculated for written pages. As erased pages are not actively written the ECC is always invalid. For this purpose the Hardware BCH unit is able to check for erased pages and does not raise an ECC error in this case. This behaviour can be influenced using the BCH_MODE register which sets the number of allowed bitflips in an erased page. Unfortunately the unit is not capable of fixing the bitflips in memory. To avoid complete software checks for erased pages, we can simply check buffers with uncorrectable ECC errors because we know that any erased page with errors is uncorrectable by the BCH unit. This patch adds the generic nand_check_erased_ecc_chunk() to gpmi-nand to correct erased pages. To have the valid data in the buffer before using them, this patch moves the read_page_swap_end() call before the ECC status checking for-loop. Fixes: 197190bc5c48 ("mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM") Signed-off-by: Markus Pargmann <mpa(a)pengutronix.de> [Squashed patches by Stefan and Boris to check ECC area] Tested-by: Stefan Christ <s.christ(a)phytec.de> Acked-by: Han xu <han.xu(a)nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 78 ++++++++++++++++++++++++-- 1 file changed, 73 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index e2a239c1f40b..40a335c6b792 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -1032,14 +1032,87 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, /* Loop over status bytes, accumulating ECC status. */ status = auxiliary_virt + nfc_geo->auxiliary_status_offset; + read_page_swap_end(this, buf, nfc_geo->payload_size, + this->payload_virt, this->payload_phys, + nfc_geo->payload_size, + payload_virt, payload_phys); + for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) { if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED)) continue; if (*status == STATUS_UNCORRECTABLE) { + int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len; + u8 *eccbuf = this->raw_buffer; + int offset, bitoffset; + int eccbytes; + int flips; + + /* Read ECC bytes into our internal raw_buffer */ + offset = nfc_geo->metadata_size * 8; + offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1); + offset -= eccbits; + bitoffset = offset % 8; + eccbytes = DIV_ROUND_UP(offset + eccbits, 8); + offset /= 8; + eccbytes -= offset; + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1); + chip->read_buf(mtd, eccbuf, eccbytes); + + /* + * ECC data are not byte aligned and we may have + * in-band data in the first and last byte of + * eccbuf. Set non-eccbits to one so that + * nand_check_erased_ecc_chunk() does not count them + * as bitflips. + */ + if (bitoffset) + eccbuf[0] |= GENMASK(bitoffset - 1, 0); + + bitoffset = (bitoffset + eccbits) % 8; + if (bitoffset) + eccbuf[eccbytes - 1] |= GENMASK(7, bitoffset); + + /* + * The ECC hardware has an uncorrectable ECC status + * code in case we have bitflips in an erased page. As + * nothing was written into this subpage the ECC is + * obviously wrong and we can not trust it. We assume + * at this point that we are reading an erased page and + * try to correct the bitflips in buffer up to + * ecc_strength bitflips. If this is a page with random + * data, we exceed this number of bitflips and have a + * ECC failure. Otherwise we use the corrected buffer. + */ + if (i == 0) { + /* The first block includes metadata */ + flips = nand_check_erased_ecc_chunk( + buf + i * nfc_geo->ecc_chunk_size, + nfc_geo->ecc_chunk_size, + eccbuf, eccbytes, + auxiliary_virt, + nfc_geo->metadata_size, + nfc_geo->ecc_strength); + } else { + flips = nand_check_erased_ecc_chunk( + buf + i * nfc_geo->ecc_chunk_size, + nfc_geo->ecc_chunk_size, + eccbuf, eccbytes, + NULL, 0, + nfc_geo->ecc_strength); + } + + if (flips > 0) { + max_bitflips = max_t(unsigned int, max_bitflips, + flips); + mtd->ecc_stats.corrected += flips; + continue; + } + mtd->ecc_stats.failed++; continue; } + mtd->ecc_stats.corrected += *status; max_bitflips = max_t(unsigned int, max_bitflips, *status); } @@ -1062,11 +1135,6 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip, chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0]; } - read_page_swap_end(this, buf, nfc_geo->payload_size, - this->payload_virt, this->payload_phys, - nfc_geo->payload_size, - payload_virt, payload_phys); - return max_bitflips; } -- 2.17.0 -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

6 years, 7 months

2
1
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2018