April 2018 - Linux-stable-mirror

Patch "blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-mq-nvme-512b-4k-t10-dif-dix-format-returns-i-o-error-on-dd-with-split-op.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Wen Xiong <wenxiong(a)linux.vnet.ibm.com> Date: Wed, 10 May 2017 08:54:11 -0500 Subject: blk-mq: NVMe 512B/4K+T10 DIF/DIX format returns I/O error on dd with split op From: Wen Xiong <wenxiong(a)linux.vnet.ibm.com> [ Upstream commit f36ea50ca0043e7b1204feaf1d2ba6bd68c08d36 ] When formatting NVMe to 512B/4K + T10 DIf/DIX, dd with split op returns "Input/output error". Looks block layer split the bio after calling bio_integrity_prep(bio). This patch fixes the issue. Below is how we debug this issue: (1)format nvme to 4K block # size with type 2 DIF (2)dd with block size bigger than 1024k. oflag=direct dd: error writing '/dev/nvme0n1': Input/output error We added some debug code in nvme device driver. It showed us the first op and the second op have the same bi and pi address. This is not correct. 1st op: nvme0n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x00b1, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme0n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 ==> This op fails and subsequent 5 retires.. Guard 0x00b1, AT 0x0000, RT physical 0x00000605 RT virtual 0x00002828 With the fix, It showed us both of the first op and the second op have correct bi and pi address. 1st op: nvme2n1 Op:Wr slba 0x505 length 0x100, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x505 Guard 0x5ccb, AT 0x0000, RT physical 0x00000505 RT virtual 0x00002828 2nd op: nvme2n1 Op:Wr slba 0x605 length 0x1, PI ctrl=0x1400, dsmgmt=0x0, AT=0x0 & RT=0x605 Guard 0xab4c, AT 0x0000, RT physical 0x00000605 RT virtual 0x00003028 Signed-off-by: Wen Xiong <wenxiong(a)linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-mq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1265,13 +1265,13 @@ static blk_qc_t blk_mq_make_request(stru blk_queue_bounce(q, &bio); + blk_queue_split(q, &bio, q->bio_split); + if (bio_integrity_enabled(bio) && bio_integrity_prep(bio)) { bio_io_error(bio); return BLK_QC_T_NONE; } - blk_queue_split(q, &bio, q->bio_split); - if (!is_flush_fua && !blk_queue_nomerges(q) && blk_attempt_plug_merge(q, bio, &request_count, &same_queue_rq)) return BLK_QC_T_NONE; Patches currently in stable-queue which might be from wenxiong(a)linux.vnet.ibm.com are queue-4.9/blk-mq-nvme-512b-4k-t10-dif-dix-format-returns-i-o-error-on-dd-with-split-op.patch

6 years, 9 months

1
0
0 0

Patch "block: fix an error code in add_partition()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled block: fix an error code in add_partition() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: block-fix-an-error-code-in-add_partition.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Tue, 23 May 2017 17:28:36 +0300 Subject: block: fix an error code in add_partition() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit 7bd897cfce1eb373892d35d7f73201b0f9b221c4 ] We don't set an error code on this path. It means that we return NULL instead of an error pointer and the caller does a NULL dereference. Fixes: 6d1d8050b4bc ("block, partition: add partition_meta_info to hd_struct") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/partition-generic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -321,8 +321,10 @@ struct hd_struct *add_partition(struct g if (info) { struct partition_meta_info *pinfo = alloc_part_info(disk); - if (!pinfo) + if (!pinfo) { + err = -ENOMEM; goto out_free_stats; + } memcpy(pinfo, info, sizeof(*info)); p->info = pinfo; } Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.9/block-fix-an-error-code-in-add_partition.patch queue-4.9/x.509-fix-error-code-in-x509_cert_parse.patch queue-4.9/rdma-iw_cxgb4-avoid-touch-after-free-error-in-arp-failure-handlers.patch queue-4.9/drm-amdkfd-null-dereference-involving-create_process.patch queue-4.9/pnfs-flexfiles-missing-error-code-in-ff_layout_alloc_lseg.patch queue-4.9/drivers-misc-vmw_vmci-vmci_queue_pair.c-fix-a-couple-integer-overflow-tests.patch queue-4.9/cxl-unlock-on-error-in-probe.patch queue-4.9/md-cluster-fix-potential-lock-issue-in-add_new_disk.patch queue-4.9/ipmi_ssif-unlock-on-allocation-failure.patch queue-4.9/powercap-fix-an-error-code-in-powercap_register_zone.patch queue-4.9/perf-core-fix-error-handling-in-perf_event_alloc.patch queue-4.9/libceph-null-deref-on-crush_decode-error-path.patch

6 years, 9 months

1
0
0 0

Patch "blk-mq: fix race between updating nr_hw_queues and switching io sched" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-mq: fix race between updating nr_hw_queues and switching io sched to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-mq-fix-race-between-updating-nr_hw_queues-and-switching-io-sched.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Ming Lei <ming.lei(a)redhat.com> Date: Sat, 6 Jan 2018 16:27:40 +0800 Subject: blk-mq: fix race between updating nr_hw_queues and switching io sched From: Ming Lei <ming.lei(a)redhat.com> [ Upstream commit fb350e0ad99359768e1e80b4784692031ec340e4 ] In both elevator_switch_mq() and blk_mq_update_nr_hw_queues(), sched tags can be allocated, and q->nr_hw_queue is used, and race is inevitable, for example: blk_mq_init_sched() may trigger use-after-free on hctx, which is freed in blk_mq_realloc_hw_ctxs() when nr_hw_queues is decreased. This patch fixes the race be holding q->sysfs_lock. Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reported-by: Yi Zhang <yi.zhang(a)redhat.com> Tested-by: Yi Zhang <yi.zhang(a)redhat.com> Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-mq.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1907,6 +1907,9 @@ static void blk_mq_realloc_hw_ctxs(struc struct blk_mq_hw_ctx **hctxs = q->queue_hw_ctx; blk_mq_sysfs_unregister(q); + + /* protect against switching io scheduler */ + mutex_lock(&q->sysfs_lock); for (i = 0; i < set->nr_hw_queues; i++) { int node; @@ -1956,6 +1959,7 @@ static void blk_mq_realloc_hw_ctxs(struc } } q->nr_hw_queues = i; + mutex_unlock(&q->sysfs_lock); blk_mq_sysfs_register(q); } Patches currently in stable-queue which might be from ming.lei(a)redhat.com are queue-4.9/blk-mq-fix-kernel-oops-in-blk_mq_tag_idle.patch queue-4.9/nvme-fix-hang-in-remove-path.patch queue-4.9/fix-loop-device-flush-before-configure-v3.patch queue-4.9/blk-mq-fix-race-between-updating-nr_hw_queues-and-switching-io-sched.patch

6 years, 9 months

1
0
0 0

Patch "blk-mq: fix kernel oops in blk_mq_tag_idle()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled blk-mq: fix kernel oops in blk_mq_tag_idle() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: blk-mq-fix-kernel-oops-in-blk_mq_tag_idle.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Ming Lei <ming.lei(a)redhat.com> Date: Tue, 9 Jan 2018 21:28:29 +0800 Subject: blk-mq: fix kernel oops in blk_mq_tag_idle() From: Ming Lei <ming.lei(a)redhat.com> [ Upstream commit 8ab0b7dc73e1b3e2987d42554b2bff503f692772 ] HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(), then we need to check it before calling blk_mq_tag_idle(), otherwise the following kernel oops can be triggered, so fix it by checking if the hw queue is unmapped since it doesn't make sense to idle the tags any more after hw queues are unmapped. [ 440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma] [ 440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000 [ 440.788359] RIP: 0010:[<ffffffffb730e2b4>] [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 440.798697] RSP: 0018:ffff893bf9bcbd10 EFLAGS: 00010286 [ 440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f [ 440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00 [ 440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000 [ 440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008 [ 440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080 [ 440.849988] FS: 0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000 [ 440.859955] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0 [ 440.876169] Call Trace: [ 440.879818] [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0 [ 440.887051] [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160 [ 440.894465] [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150 [ 440.901881] [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core] [ 440.910068] [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core] [ 440.919026] [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma] [ 440.928079] [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma] [ 440.937126] [<ffffffffb70ab58a>] process_one_work+0x17a/0x440 [ 440.944517] [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0 [ 440.951607] [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0 [ 440.959760] [<ffffffffb70b352f>] kthread+0xcf/0xe0 [ 440.966055] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.973715] [<ffffffffb76d8658>] ret_from_fork+0x58/0x90 [ 440.980586] [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40 [ 440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f [ 441.011620] RIP [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40 [ 441.019301] RSP <ffff893bf9bcbd10> [ 441.024052] CR2: 0000000000000008 Reported-by: Zhang Yi <yizhan(a)redhat.com> Tested-by: Zhang Yi <yizhan(a)redhat.com> Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-mq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -1592,7 +1592,8 @@ static void blk_mq_exit_hctx(struct requ { unsigned flush_start_tag = set->queue_depth; - blk_mq_tag_idle(hctx); + if (blk_mq_hw_queue_mapped(hctx)) + blk_mq_tag_idle(hctx); if (set->ops->exit_request) set->ops->exit_request(set->driver_data, Patches currently in stable-queue which might be from ming.lei(a)redhat.com are queue-4.9/blk-mq-fix-kernel-oops-in-blk_mq_tag_idle.patch queue-4.9/nvme-fix-hang-in-remove-path.patch queue-4.9/fix-loop-device-flush-before-configure-v3.patch queue-4.9/blk-mq-fix-race-between-updating-nr_hw_queues-and-switching-io-sched.patch

6 years, 9 months

1
0
0 0

Patch "bio-integrity: Do not allocate integrity context for bio w/o data" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bio-integrity: Do not allocate integrity context for bio w/o data to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bio-integrity-do-not-allocate-integrity-context-for-bio-w-o-data.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Dmitry Monakhov <dmonakhov(a)openvz.org> Date: Wed, 10 May 2017 19:20:44 +0400 Subject: bio-integrity: Do not allocate integrity context for bio w/o data From: Dmitry Monakhov <dmonakhov(a)openvz.org> [ Upstream commit 3116a23bb30272d74ea81baf5d0ee23f602dd15b ] If bio has no data, such as ones from blkdev_issue_flush(), then we have nothing to protect. This patch prevent bugon like follows: kfree_debugcheck: out of range ptr ac1fa1d106742a5ah kernel BUG at mm/slab.c:2773! invalid opcode: 0000 [#1] SMP Modules linked in: bcache CPU: 0 PID: 4428 Comm: xfs_io Tainted: G W 4.11.0-rc4-ext4-00041-g2ef0043-dirty #43 Hardware name: Virtuozzo KVM, BIOS seabios-1.7.5-11.vz7.4 04/01/2014 task: ffff880137786440 task.stack: ffffc90000ba8000 RIP: 0010:kfree_debugcheck+0x25/0x2a RSP: 0018:ffffc90000babde0 EFLAGS: 00010082 RAX: 0000000000000034 RBX: ac1fa1d106742a5a RCX: 0000000000000007 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013f3ccb40 RBP: ffffc90000babde8 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000fcb76420 R11: 00000000725172ed R12: 0000000000000282 R13: ffffffff8150e766 R14: ffff88013a145e00 R15: 0000000000000001 FS: 00007fb09384bf40(0000) GS:ffff88013f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd0172f9e40 CR3: 0000000137fa9000 CR4: 00000000000006f0 Call Trace: kfree+0xc8/0x1b3 bio_integrity_free+0xc3/0x16b bio_free+0x25/0x66 bio_put+0x14/0x26 blkdev_issue_flush+0x7a/0x85 blkdev_fsync+0x35/0x42 vfs_fsync_range+0x8e/0x9f vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 entry_SYSCALL_64_fastpath+0x1f/0xc2 Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Hannes Reinecke <hare(a)suse.com> Reviewed-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Dmitry Monakhov <dmonakhov(a)openvz.org> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/bio-integrity.c | 3 +++ 1 file changed, 3 insertions(+) --- a/block/bio-integrity.c +++ b/block/bio-integrity.c @@ -175,6 +175,9 @@ bool bio_integrity_enabled(struct bio *b if (!bio_is_rw(bio)) return false; + if (!bio_sectors(bio)) + return false; + /* Already protected? */ if (bio_integrity(bio)) return false; Patches currently in stable-queue which might be from dmonakhov(a)openvz.org are queue-4.9/bio-integrity-do-not-allocate-integrity-context-for-bio-w-o-data.patch

6 years, 9 months

1
0
0 0

Patch "bcache: segregate flash only volume write streams" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: segregate flash only volume write streams to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-segregate-flash-only-volume-write-streams.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Tang Junhui <tang.junhui(a)zte.com.cn> Date: Mon, 8 Jan 2018 12:21:21 -0800 Subject: bcache: segregate flash only volume write streams From: Tang Junhui <tang.junhui(a)zte.com.cn> [ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ] In such scenario that there are some flash only volumes , and some cached devices, when many tasks request these devices in writeback mode, the write IOs may fall to the same bucket as bellow: | cached data | flash data | cached data | cached data| flash data| then after writeback of these cached devices, the bucket would be like bellow bucket: | free | flash data | free | free | flash data | So, there are many free space in this bucket, but since data of flash only volumes still exists, so this bucket cannot be reclaimable, which would cause waste of bucket space. In this patch, we segregate flash only volume write streams from cached devices, so data from flash only volumes and cached devices can store in different buckets. Compare to v1 patch, this patch do not add a additionally open bucket list, and it is try best to segregate flash only volume write streams from cached devices, sectors of flash only volumes may still be mixed with dirty sectors of cached device, but the number is very small. [mlyle: fixed commit log formatting, permissions, line endings] Signed-off-by: Tang Junhui <tang.junhui(a)zte.com.cn> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/alloc.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) --- a/drivers/md/bcache/alloc.c +++ b/drivers/md/bcache/alloc.c @@ -512,15 +512,21 @@ struct open_bucket { /* * We keep multiple buckets open for writes, and try to segregate different - * write streams for better cache utilization: first we look for a bucket where - * the last write to it was sequential with the current write, and failing that - * we look for a bucket that was last used by the same task. + * write streams for better cache utilization: first we try to segregate flash + * only volume write streams from cached devices, secondly we look for a bucket + * where the last write to it was sequential with the current write, and + * failing that we look for a bucket that was last used by the same task. * * The ideas is if you've got multiple tasks pulling data into the cache at the * same time, you'll get better cache utilization if you try to segregate their * data and preserve locality. * - * For example, say you've starting Firefox at the same time you're copying a + * For example, dirty sectors of flash only volume is not reclaimable, if their + * dirty sectors mixed with dirty sectors of cached device, such buckets will + * be marked as dirty and won't be reclaimed, though the dirty data of cached + * device have been written back to backend device. + * + * And say you've starting Firefox at the same time you're copying a * bunch of files. Firefox will likely end up being fairly hot and stay in the * cache awhile, but the data you copied might not be; if you wrote all that * data to the same buckets it'd get invalidated at the same time. @@ -537,7 +543,10 @@ static struct open_bucket *pick_data_buc struct open_bucket *ret, *ret_task = NULL; list_for_each_entry_reverse(ret, &c->data_buckets, list) - if (!bkey_cmp(&ret->key, search)) + if (UUID_FLASH_ONLY(&c->uuids[KEY_INODE(&ret->key)]) != + UUID_FLASH_ONLY(&c->uuids[KEY_INODE(search)])) + continue; + else if (!bkey_cmp(&ret->key, search)) goto found; else if (ret->last_write_point == write_point) ret_task = ret; Patches currently in stable-queue which might be from tang.junhui(a)zte.com.cn are queue-4.9/bcache-segregate-flash-only-volume-write-streams.patch queue-4.9/bcache-stop-writeback-thread-after-detaching.patch

6 years, 9 months

1
0
0 0

Patch "bcache: stop writeback thread after detaching" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bcache: stop writeback thread after detaching to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bcache-stop-writeback-thread-after-detaching.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Tang Junhui <tang.junhui(a)zte.com.cn> Date: Mon, 8 Jan 2018 12:21:19 -0800 Subject: bcache: stop writeback thread after detaching From: Tang Junhui <tang.junhui(a)zte.com.cn> [ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by: Tang Junhui <tang.junhui(a)zte.com.cn> Reviewed-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Michael Lyle <mlyle(a)lyle.org> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/bcache/super.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -892,6 +892,12 @@ static void cached_dev_detach_finish(str mutex_lock(&bch_register_lock); + cancel_delayed_work_sync(&dc->writeback_rate_update); + if (!IS_ERR_OR_NULL(dc->writeback_thread)) { + kthread_stop(dc->writeback_thread); + dc->writeback_thread = NULL; + } + memset(&dc->sb.set_uuid, 0, 16); SET_BDEV_STATE(&dc->sb, BDEV_STATE_NONE); Patches currently in stable-queue which might be from tang.junhui(a)zte.com.cn are queue-4.9/bcache-segregate-flash-only-volume-write-streams.patch queue-4.9/bcache-stop-writeback-thread-after-detaching.patch

6 years, 9 months

1
0
0 0

Patch "backlight: tdo24m: Fix the SPI CS between transfers" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled backlight: tdo24m: Fix the SPI CS between transfers to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: backlight-tdo24m-fix-the-spi-cs-between-transfers.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Robert Jarzmik <robert.jarzmik(a)free.fr> Date: Thu, 28 Dec 2017 09:27:41 +0100 Subject: backlight: tdo24m: Fix the SPI CS between transfers From: Robert Jarzmik <robert.jarzmik(a)free.fr> [ Upstream commit 2023b0524a6310e9ea80daf085f51c71bff9289f ] Currently the LCD display (TD035S) on the cm-x300 platform is broken and remains blank. The TD0245S specification requires that the chipselect is toggled between commands sent to the panel. This was also the purpose of the former patch of commit f64dcac0b124 ("backlight: tdo24m: ensure chip select changes between transfers"). Unfortunately, the "cs_change" field of a SPI transfer is misleading. Its true meaning is that for a SPI message holding multiple transfers, the chip select is toggled between each transfer, but for the last transfer it remains asserted. In this driver, all the SPI messages contain exactly one transfer, which means that each transfer is the last of its message, and as a consequence the chip select is never toggled. Actually, there was a second bug hidding the first one, hence the problem was not seen until v4.6. This problem was fixed by commit a52db659c79c ("spi: pxa2xx: Fix cs_change management") for PXA based boards. This fix makes the TD035S work again on a cm-x300 board. The same applies to other PXA boards, ie. corgi and tosa. Fixes: a52db659c79c ("spi: pxa2xx: Fix cs_change management") Reported-by: Andrea Adami <andrea.adami(a)gmail.com> Signed-off-by: Robert Jarzmik <robert.jarzmik(a)free.fr> Acked-by: Daniel Thompson <daniel.thompson(a)linaro.org> Signed-off-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/backlight/corgi_lcd.c | 2 +- drivers/video/backlight/tdo24m.c | 2 +- drivers/video/backlight/tosa_lcd.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -177,7 +177,7 @@ static int corgi_ssp_lcdtg_send(struct c struct spi_message msg; struct spi_transfer xfer = { .len = 1, - .cs_change = 1, + .cs_change = 0, .tx_buf = lcd->buf, }; --- a/drivers/video/backlight/tdo24m.c +++ b/drivers/video/backlight/tdo24m.c @@ -369,7 +369,7 @@ static int tdo24m_probe(struct spi_devic spi_message_init(m); - x->cs_change = 1; + x->cs_change = 0; x->tx_buf = &lcd->buf[0]; spi_message_add_tail(x, m); --- a/drivers/video/backlight/tosa_lcd.c +++ b/drivers/video/backlight/tosa_lcd.c @@ -49,7 +49,7 @@ static int tosa_tg_send(struct spi_devic struct spi_message msg; struct spi_transfer xfer = { .len = 1, - .cs_change = 1, + .cs_change = 0, .tx_buf = buf, }; Patches currently in stable-queue which might be from robert.jarzmik(a)free.fr are queue-4.9/tags-honor-compiled_source-with-apart-output-directory.patch queue-4.9/backlight-tdo24m-fix-the-spi-cs-between-transfers.patch queue-4.9/pxa_camera-fix-module-remove-codepath-for-v4l2-clock.patch

6 years, 9 months

1
0
0 0

Patch "backlight: Report error on failure" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled backlight: Report error on failure to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: backlight-report-error-on-failure.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Sudip Mukherjee <sudipm.mukherjee(a)gmail.com> Date: Wed, 17 May 2017 21:55:07 +0100 Subject: backlight: Report error on failure From: Sudip Mukherjee <sudipm.mukherjee(a)gmail.com> [ Upstream commit 7e715c2d9c27c23f3187454157c58cf292ed103e ] It is possible to update the backlight power and the brightness using the sysfs and on writing it either returns the count or if the callback function does not exist then returns the error code 'ENXIO'. We have a situation where the userspace client is writing to the sysfs to update the power and since the callback function exists the client receives the return value as count and considers the operation to be successful. That is correct as the write to the sysfs was successful. But there is no way to know if the actual operation was done or not. backlight_update_status() returns the error code if it fails. Pass that to the userspace client who is trying to update the power so that the client knows that the operation failed. Signed-off-by: Sudip Mukherjee <sudip.mukherjee(a)codethink.co.uk> Acked-by: Daniel Thompson <daniel.thompson(a)linaro.org> Signed-off-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/backlight/backlight.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) --- a/drivers/video/backlight/backlight.c +++ b/drivers/video/backlight/backlight.c @@ -134,7 +134,7 @@ static ssize_t bl_power_store(struct dev { int rc; struct backlight_device *bd = to_backlight_device(dev); - unsigned long power; + unsigned long power, old_power; rc = kstrtoul(buf, 0, &power); if (rc) @@ -145,10 +145,16 @@ static ssize_t bl_power_store(struct dev if (bd->ops) { pr_debug("set power to %lu\n", power); if (bd->props.power != power) { + old_power = bd->props.power; bd->props.power = power; - backlight_update_status(bd); + rc = backlight_update_status(bd); + if (rc) + bd->props.power = old_power; + else + rc = count; + } else { + rc = count; } - rc = count; } mutex_unlock(&bd->ops_lock); @@ -176,8 +182,7 @@ int backlight_device_set_brightness(stru else { pr_debug("set brightness to %lu\n", brightness); bd->props.brightness = brightness; - backlight_update_status(bd); - rc = 0; + rc = backlight_update_status(bd); } } mutex_unlock(&bd->ops_lock); Patches currently in stable-queue which might be from sudipm.mukherjee(a)gmail.com are queue-4.9/backlight-report-error-on-failure.patch

6 years, 9 months

1
0
0 0

Patch "ath10k: add BMI parameters to fix calibration from DT/pre-cal" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: add BMI parameters to fix calibration from DT/pre-cal to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-add-bmi-parameters-to-fix-calibration-from-dt-pre-cal.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Anilkumar Kolli <akolli(a)qti.qualcomm.com> Date: Wed, 31 May 2017 14:21:27 +0300 Subject: ath10k: add BMI parameters to fix calibration from DT/pre-cal From: Anilkumar Kolli <akolli(a)qti.qualcomm.com> [ Upstream commit a9f5f287fa1d47d61dfa8b60f94831174b2ea4d0 ] QCA99X0, QCA9888, QCA9984 supports calibration data in either OTP or DT/pre-cal file. Current ath10k supports Calibration data from OTP only. If caldata is loaded from DT/pre-cal file, fetching board id and applying calibration parameters like tx power gets failed. error log: [ 15.733663] ath10k_pci 0000:01:00.0: failed to fetch board file: -2 [ 15.741474] ath10k_pci 0000:01:00.0: could not probe fw (-2) This patch adds calibration data support from DT/pre-cal file. Below parameters are used to get board id and applying calibration parameters from cal data. EEPROM[OTP] FLASH[DT/pre-cal file] Cal param 0x700 0x10000 Board id 0x10 0x8000 Tested on QCA9888 with pre-cal file. Signed-off-by: Anilkumar Kolli <akolli(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/bmi.h | 2 ++ drivers/net/wireless/ath/ath10k/core.c | 16 +++++++++++++--- 2 files changed, 15 insertions(+), 3 deletions(-) --- a/drivers/net/wireless/ath/ath10k/bmi.h +++ b/drivers/net/wireless/ath/ath10k/bmi.h @@ -83,6 +83,8 @@ enum bmi_cmd_id { #define BMI_NVRAM_SEG_NAME_SZ 16 #define BMI_PARAM_GET_EEPROM_BOARD_ID 0x10 +#define BMI_PARAM_GET_FLASH_BOARD_ID 0x8000 +#define BMI_PARAM_FLASH_SECTION_ALL 0x10000 #define ATH10K_BMI_BOARD_ID_FROM_OTP_MASK 0x7c00 #define ATH10K_BMI_BOARD_ID_FROM_OTP_LSB 10 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -652,7 +652,7 @@ static int ath10k_core_get_board_id_from { u32 result, address; u8 board_id, chip_id; - int ret; + int ret, bmi_board_id_param; address = ar->hw_params.patch_load_addr; @@ -676,8 +676,13 @@ static int ath10k_core_get_board_id_from return ret; } - ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EEPROM_BOARD_ID, - &result); + if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || + ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE) + bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID; + else + bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID; + + ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result); if (ret) { ath10k_err(ar, "could not execute otp for board id check: %d\n", ret); @@ -739,6 +744,11 @@ static int ath10k_download_and_run_otp(s return ret; } + /* As of now pre-cal is valid for 10_4 variants */ + if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || + ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE) + bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL; + ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result); if (ret) { ath10k_err(ar, "could not execute otp (%d)\n", ret); Patches currently in stable-queue which might be from akolli(a)qti.qualcomm.com are queue-4.9/ath10k-add-bmi-parameters-to-fix-calibration-from-dt-pre-cal.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2018