April 2018 - Linux-stable-mirror

Patch "clk: Fix __set_clk_rates error print-string" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled clk: Fix __set_clk_rates error print-string to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: clk-fix-__set_clk_rates-error-print-string.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> Date: Mon, 15 May 2017 11:58:59 +0100 Subject: clk: Fix __set_clk_rates error print-string From: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> [ Upstream commit ee177c5d6369f8e5d3e4793dce501cf4431313a1 ] When failing to set a clock the printout emitted is incorrect. "u32 rate" is formatted as %d and should be %u whereas "unsigned long clk_set_rate()" is formatted as %ld and should be %lu as per Documentation/printk-formats.txt. Fixes: 2885c3b2a3da ("clk: Show correct information when fail to set clock rate") Signed-off-by: Bryan O'Donoghue <pure.logic(a)nexus-software.ie> Signed-off-by: Stephen Boyd <sboyd(a)codeaurora.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/clk/clk-conf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/clk/clk-conf.c +++ b/drivers/clk/clk-conf.c @@ -106,7 +106,7 @@ static int __set_clk_rates(struct device rc = clk_set_rate(clk, rate); if (rc < 0) - pr_err("clk: couldn't set %s clk rate to %d (%d), current rate: %ld\n", + pr_err("clk: couldn't set %s clk rate to %u (%d), current rate: %lu\n", __clk_get_name(clk), rate, rc, clk_get_rate(clk)); clk_put(clk); Patches currently in stable-queue which might be from pure.logic(a)nexus-software.ie are queue-4.9/clk-fix-__set_clk_rates-error-print-string.patch

6 years, 9 months

1
0
0 0

Patch "cfg80211: make RATE_INFO_BW_20 the default" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cfg80211: make RATE_INFO_BW_20 the default to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cfg80211-make-rate_info_bw_20-the-default.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Johannes Berg <johannes.berg(a)intel.com> Date: Thu, 4 May 2017 08:42:30 +0200 Subject: cfg80211: make RATE_INFO_BW_20 the default From: Johannes Berg <johannes.berg(a)intel.com> [ Upstream commit 842be75c77cb72ee546a2b19da9c285fb3ded660 ] Due to the way I did the RX bitrate conversions in mac80211 with spatch, going setting flags to setting the value, many drivers now don't set the bandwidth value for 20 MHz, since with the flags it wasn't necessary to (there was no 20 MHz flag, only the others.) Rather than go through and try to fix up all the drivers, instead renumber the enum so that 20 MHz, which is the typical bandwidth, actually has the value 0, making those drivers all work again. If VHT was hit used with a driver not reporting it, e.g. iwlmvm, this manifested in hitting the bandwidth warning in cfg80211_calculate_bitrate_vht(). Reported-by: Linus Torvalds <torvalds(a)linux-foundation.org> Tested-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/net/cfg80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -947,9 +947,9 @@ enum rate_info_flags { * @RATE_INFO_BW_160: 160 MHz bandwidth */ enum rate_info_bw { + RATE_INFO_BW_20 = 0, RATE_INFO_BW_5, RATE_INFO_BW_10, - RATE_INFO_BW_20, RATE_INFO_BW_40, RATE_INFO_BW_80, RATE_INFO_BW_160, Patches currently in stable-queue which might be from johannes.berg(a)intel.com are queue-4.9/cfg80211-make-rate_info_bw_20-the-default.patch queue-4.9/iwlwifi-tt-move-ucode_loaded-check-under-mutex.patch queue-4.9/mac80211-fix-setting-tx-power-on-monitor-interfaces.patch queue-4.9/mac80211-bail-out-from-prep_connection-if-a-reconfig-is-ongoing.patch

6 years, 9 months

1
0
0 0

Patch "CIFS: silence lockdep splat in cifs_relock_file()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled CIFS: silence lockdep splat in cifs_relock_file() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cifs-silence-lockdep-splat-in-cifs_relock_file.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Rabin Vincent <rabinv(a)axis.com> Date: Wed, 3 May 2017 17:17:21 +0200 Subject: CIFS: silence lockdep splat in cifs_relock_file() From: Rabin Vincent <rabinv(a)axis.com> [ Upstream commit 560d388950ceda5e7c7cdef7f3d9a8ff297bbf9d ] cifs_relock_file() can perform a down_write() on the inode's lock_sem even though it was already performed in cifs_strict_readv(). Lockdep complains about this. AFAICS, there is no problem here, and lockdep just needs to be told that this nesting is OK. ============================================= [ INFO: possible recursive locking detected ] 4.11.0+ #20 Not tainted --------------------------------------------- cat/701 is trying to acquire lock: (&cifsi->lock_sem){++++.+}, at: cifs_reopen_file+0x7a7/0xc00 but task is already holding lock: (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&cifsi->lock_sem); lock(&cifsi->lock_sem); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by cat/701: #0: (&cifsi->lock_sem){++++.+}, at: cifs_strict_readv+0x177/0x310 stack backtrace: CPU: 0 PID: 701 Comm: cat Not tainted 4.11.0+ #20 Call Trace: dump_stack+0x85/0xc2 __lock_acquire+0x17dd/0x2260 ? trace_hardirqs_on_thunk+0x1a/0x1c ? preempt_schedule_irq+0x6b/0x80 lock_acquire+0xcc/0x260 ? lock_acquire+0xcc/0x260 ? cifs_reopen_file+0x7a7/0xc00 down_read+0x2d/0x70 ? cifs_reopen_file+0x7a7/0xc00 cifs_reopen_file+0x7a7/0xc00 ? printk+0x43/0x4b cifs_readpage_worker+0x327/0x8a0 cifs_readpage+0x8c/0x2a0 generic_file_read_iter+0x692/0xd00 cifs_strict_readv+0x29f/0x310 generic_file_splice_read+0x11c/0x1c0 do_splice_to+0xa5/0xc0 splice_direct_to_actor+0xfa/0x350 ? generic_pipe_buf_nosteal+0x10/0x10 do_splice_direct+0xb5/0xe0 do_sendfile+0x278/0x3a0 SyS_sendfile64+0xc4/0xe0 entry_SYSCALL_64_fastpath+0x1f/0xbe Signed-off-by: Rabin Vincent <rabinv(a)axis.com> Acked-by: Pavel Shilovsky <pshilov(a)microsoft.com> Signed-off-by: Steve French <smfrench(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -589,7 +589,7 @@ cifs_relock_file(struct cifsFileInfo *cf struct cifs_tcon *tcon = tlink_tcon(cfile->tlink); int rc = 0; - down_read(&cinode->lock_sem); + down_read_nested(&cinode->lock_sem, SINGLE_DEPTH_NESTING); if (cinode->can_cache_brlcks) { /* can cache locks - no need to relock */ up_read(&cinode->lock_sem); Patches currently in stable-queue which might be from rabinv(a)axis.com are queue-4.9/ubi-fastmap-fix-slab-corruption.patch queue-4.9/cifs-silence-lockdep-splat-in-cifs_relock_file.patch

6 years, 9 months

1
0
0 0

Patch "bus: brcmstb_gisb: correct support for 64-bit address output" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bus: brcmstb_gisb: correct support for 64-bit address output to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Doug Berger <opendmb(a)gmail.com> Date: Wed, 29 Mar 2017 17:29:10 -0700 Subject: bus: brcmstb_gisb: correct support for 64-bit address output From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 0c2aa0e4b308815e877601845c1a89913f9bd2b9 ] The GISB bus can support addresses beyond 32-bits. So this commit corrects support for reading a captured 64-bit address into a 64-bit variable by obtaining the high bits from the ARB_ERR_CAP_HI_ADDR register (when present) and then outputting the full 64-bit value. It also removes unused definitions. Fixes: 44127b771d9c ("bus: add Broadcom GISB bus arbiter timeout/error handler") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Acked-by: Gregory Fong <gregory.0xf0(a)gmail.com> Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bus/brcmstb_gisb.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-) --- a/drivers/bus/brcmstb_gisb.c +++ b/drivers/bus/brcmstb_gisb.c @@ -37,8 +37,6 @@ #define ARB_ERR_CAP_CLEAR (1 << 0) #define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12) #define ARB_ERR_CAP_STATUS_TEA (1 << 11) -#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2) -#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c #define ARB_ERR_CAP_STATUS_WRITE (1 << 1) #define ARB_ERR_CAP_STATUS_VALID (1 << 0) @@ -47,7 +45,6 @@ enum { ARB_ERR_CAP_CLR, ARB_ERR_CAP_HI_ADDR, ARB_ERR_CAP_ADDR, - ARB_ERR_CAP_DATA, ARB_ERR_CAP_STATUS, ARB_ERR_CAP_MASTER, }; @@ -57,7 +54,6 @@ static const int gisb_offsets_bcm7038[] [ARB_ERR_CAP_CLR] = 0x0c4, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x0c8, - [ARB_ERR_CAP_DATA] = 0x0cc, [ARB_ERR_CAP_STATUS] = 0x0d0, [ARB_ERR_CAP_MASTER] = -1, }; @@ -67,7 +63,6 @@ static const int gisb_offsets_bcm7400[] [ARB_ERR_CAP_CLR] = 0x0c8, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x0cc, - [ARB_ERR_CAP_DATA] = 0x0d0, [ARB_ERR_CAP_STATUS] = 0x0d4, [ARB_ERR_CAP_MASTER] = 0x0d8, }; @@ -77,7 +72,6 @@ static const int gisb_offsets_bcm7435[] [ARB_ERR_CAP_CLR] = 0x168, [ARB_ERR_CAP_HI_ADDR] = -1, [ARB_ERR_CAP_ADDR] = 0x16c, - [ARB_ERR_CAP_DATA] = 0x170, [ARB_ERR_CAP_STATUS] = 0x174, [ARB_ERR_CAP_MASTER] = 0x178, }; @@ -87,7 +81,6 @@ static const int gisb_offsets_bcm7445[] [ARB_ERR_CAP_CLR] = 0x7e4, [ARB_ERR_CAP_HI_ADDR] = 0x7e8, [ARB_ERR_CAP_ADDR] = 0x7ec, - [ARB_ERR_CAP_DATA] = 0x7f0, [ARB_ERR_CAP_STATUS] = 0x7f4, [ARB_ERR_CAP_MASTER] = 0x7f8, }; @@ -109,9 +102,13 @@ static u32 gisb_read(struct brcmstb_gisb { int offset = gdev->gisb_offsets[reg]; - /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */ - if (offset == -1) - return 1; + if (offset < 0) { + /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */ + if (reg == ARB_ERR_CAP_MASTER) + return 1; + else + return 0; + } if (gdev->big_endian) return ioread32be(gdev->base + offset); @@ -119,6 +116,16 @@ static u32 gisb_read(struct brcmstb_gisb return ioread32(gdev->base + offset); } +static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev) +{ + u64 value; + + value = gisb_read(gdev, ARB_ERR_CAP_ADDR); + value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32; + + return value; +} + static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg) { int offset = gdev->gisb_offsets[reg]; @@ -185,7 +192,7 @@ static int brcmstb_gisb_arb_decode_addr( const char *reason) { u32 cap_status; - unsigned long arb_addr; + u64 arb_addr; u32 master; const char *m_name; char m_fmt[11]; @@ -197,10 +204,7 @@ static int brcmstb_gisb_arb_decode_addr( return 1; /* Read the address and master */ - arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff; -#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT)) - arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32; -#endif + arb_addr = gisb_read_address(gdev); master = gisb_read(gdev, ARB_ERR_CAP_MASTER); m_name = brcmstb_gisb_master_to_str(gdev, master); @@ -209,7 +213,7 @@ static int brcmstb_gisb_arb_decode_addr( m_name = m_fmt; } - pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n", + pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n", __func__, reason, arb_addr, cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R', cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "", Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.9/bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch queue-4.9/bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch

6 years, 9 months

1
0
0 0

Patch "bus: brcmstb_gisb: Use register offsets with writes too" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bus: brcmstb_gisb: Use register offsets with writes too to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Doug Berger <opendmb(a)gmail.com> Date: Wed, 29 Mar 2017 17:29:09 -0700 Subject: bus: brcmstb_gisb: Use register offsets with writes too From: Doug Berger <opendmb(a)gmail.com> [ Upstream commit 856c7ccb9ce7a061f04bdf586f649cb93654e294 ] This commit corrects the bug introduced in commit f80835875d3d ("bus: brcmstb_gisb: Look up register offsets in a table") such that gisb_write() translates the register enumeration into an offset from the base address for writes as well as reads. Fixes: f80835875d3d ("bus: brcmstb_gisb: Look up register offsets in a table") Signed-off-by: Doug Berger <opendmb(a)gmail.com> Acked-by: Gregory Fong <gregory.0xf0(a)gmail.com> Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bus/brcmstb_gisb.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/drivers/bus/brcmstb_gisb.c +++ b/drivers/bus/brcmstb_gisb.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Broadcom Corporation + * Copyright (C) 2014-2017 Broadcom * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -127,9 +127,9 @@ static void gisb_write(struct brcmstb_gi return; if (gdev->big_endian) - iowrite32be(val, gdev->base + reg); + iowrite32be(val, gdev->base + offset); else - iowrite32(val, gdev->base + reg); + iowrite32(val, gdev->base + offset); } static ssize_t gisb_arb_get_timeout(struct device *dev, Patches currently in stable-queue which might be from opendmb(a)gmail.com are queue-4.9/bus-brcmstb_gisb-correct-support-for-64-bit-address-output.patch queue-4.9/bus-brcmstb_gisb-use-register-offsets-with-writes-too.patch

6 years, 9 months

1
0
0 0

Patch "bonding: Don't update slave->link until ready to commit" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bonding: Don't update slave->link until ready to commit to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bonding-don-t-update-slave-link-until-ready-to-commit.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Nithin Sujir <nsujir(a)tintri.com> Date: Wed, 24 May 2017 19:45:17 -0700 Subject: bonding: Don't update slave->link until ready to commit From: Nithin Sujir <nsujir(a)tintri.com> [ Upstream commit 797a93647a48d6cb8a20641a86a71713a947f786 ] In the loadbalance arp monitoring scheme, when a slave link change is detected, the slave->link is immediately updated and slave_state_changed is set. Later down the function, the rtnl_lock is acquired and the changes are committed, updating the bond link state. However, the acquisition of the rtnl_lock can fail. The next time the monitor runs, since slave->link is already updated, it determines that link is unchanged. This results in the bond link state permanently out of sync with the slave link. This patch modifies bond_loadbalance_arp_mon() to handle link changes identical to bond_ab_arp_{inspect/commit}(). The new link state is maintained in slave->new_link until we're ready to commit at which point it's copied into slave->link. NOTE: miimon_{inspect/commit}() has a more complex state machine requiring the use of the bond_{propose,commit}_link_state() functions which maintains the intermediate state in slave->link_new_state. The arp monitors don't require that. Testing: This bug is very easy to reproduce with the following steps. 1. In a loop, toggle a slave link of a bond slave interface. 2. In a separate loop, do ifconfig up/down of an unrelated interface to create contention for rtnl_lock. Within a few iterations, the bond link goes out of sync with the slave link. Signed-off-by: Nithin Nayak Sujir <nsujir(a)tintri.com> Cc: Mahesh Bandewar <maheshb(a)google.com> Cc: Jay Vosburgh <jay.vosburgh(a)canonical.com> Acked-by: Mahesh Bandewar <maheshb(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/bonding/bond_main.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2605,11 +2605,13 @@ static void bond_loadbalance_arp_mon(str bond_for_each_slave_rcu(bond, slave, iter) { unsigned long trans_start = dev_trans_start(slave->dev); + slave->new_link = BOND_LINK_NOCHANGE; + if (slave->link != BOND_LINK_UP) { if (bond_time_in_interval(bond, trans_start, 1) && bond_time_in_interval(bond, slave->last_rx, 1)) { - slave->link = BOND_LINK_UP; + slave->new_link = BOND_LINK_UP; slave_state_changed = 1; /* primary_slave has no meaning in round-robin @@ -2636,7 +2638,7 @@ static void bond_loadbalance_arp_mon(str if (!bond_time_in_interval(bond, trans_start, 2) || !bond_time_in_interval(bond, slave->last_rx, 2)) { - slave->link = BOND_LINK_DOWN; + slave->new_link = BOND_LINK_DOWN; slave_state_changed = 1; if (slave->link_failure_count < UINT_MAX) @@ -2667,6 +2669,11 @@ static void bond_loadbalance_arp_mon(str if (!rtnl_trylock()) goto re_arm; + bond_for_each_slave(bond, slave, iter) { + if (slave->new_link != BOND_LINK_NOCHANGE) + slave->link = slave->new_link; + } + if (slave_state_changed) { bond_slave_state_change(bond); if (BOND_MODE(bond) == BOND_MODE_XOR) Patches currently in stable-queue which might be from nsujir(a)tintri.com are queue-4.9/bonding-don-t-update-slave-link-until-ready-to-commit.patch

6 years, 9 months

1
0
0 0

Patch "btrfs: fix incorrect error return ret being passed to mapping_set_error" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled btrfs: fix incorrect error return ret being passed to mapping_set_error to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 9 May 2017 18:14:01 +0100 Subject: btrfs: fix incorrect error return ret being passed to mapping_set_error From: Colin Ian King <colin.king(a)canonical.com> [ Upstream commit bff5baf8aa37a97293725a16c03f49872249c07e ] The setting of return code ret should be based on the error code passed into function end_extent_writepage and not on ret. Thanks to Liu Bo for spotting this mistake in the original fix I submitted. Detected by CoverityScan, CID#1414312 ("Logically dead code") Fixes: 5dca6eea91653e ("Btrfs: mark mapping with error flag to report errors to userspace") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Reviewed-by: Liu Bo <bo.li.liu(a)oracle.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/btrfs/extent_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2453,7 +2453,7 @@ void end_extent_writepage(struct page *p if (!uptodate) { ClearPageUptodate(page); SetPageError(page); - ret = ret < 0 ? ret : -EIO; + ret = err < 0 ? err : -EIO; mapping_set_error(page->mapping, ret); } } Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.9/wl1251-check-return-from-call-to-wl1251_acx_arp_ip_filter.patch queue-4.9/netxen_nic-set-rcode-to-the-return-status-from-the-call-to-netxen_issue_cmd.patch queue-4.9/btrfs-fix-incorrect-error-return-ret-being-passed-to-mapping_set_error.patch queue-4.9/ath5k-fix-memory-leak-on-buf-on-failed-eeprom-read.patch

6 years, 9 months

1
0
0 0

Patch "bnx2x: Allow vfs to disable txvlan offload" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bnx2x: Allow vfs to disable txvlan offload to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bnx2x-allow-vfs-to-disable-txvlan-offload.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Mintz, Yuval" <Yuval.Mintz(a)cavium.com> Date: Fri, 9 Jun 2017 17:17:01 +0300 Subject: bnx2x: Allow vfs to disable txvlan offload From: "Mintz, Yuval" <Yuval.Mintz(a)cavium.com> [ Upstream commit 92f85f05caa51d844af6ea14ffbc7a786446a644 ] VF clients are configured as enforced, meaning firmware is validating the correctness of their ethertype/vid during transmission. Once txvlan is disabled, VF would start getting SKBs for transmission here vlan is on the payload - but it'll pass the packet's ethertype instead of the vid, leading to firmware declaring it as malicious. Signed-off-by: Yuval Mintz <Yuval.Mintz(a)cavium.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -3887,15 +3887,26 @@ netdev_tx_t bnx2x_start_xmit(struct sk_b /* when transmitting in a vf, start bd must hold the ethertype * for fw to enforce it */ + u16 vlan_tci = 0; #ifndef BNX2X_STOP_ON_ERROR - if (IS_VF(bp)) + if (IS_VF(bp)) { #endif - tx_start_bd->vlan_or_ethertype = - cpu_to_le16(ntohs(eth->h_proto)); + /* Still need to consider inband vlan for enforced */ + if (__vlan_get_tag(skb, &vlan_tci)) { + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(ntohs(eth->h_proto)); + } else { + tx_start_bd->bd_flags.as_bitfield |= + (X_ETH_INBAND_VLAN << + ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT); + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(vlan_tci); + } #ifndef BNX2X_STOP_ON_ERROR - else + } else { /* used by FW for packet accounting */ tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + } #endif } Patches currently in stable-queue which might be from Yuval.Mintz(a)cavium.com are queue-4.9/bnx2x-allow-vfs-to-disable-txvlan-offload.patch queue-4.9/qed-correct-doorbell-configuration-for-4kb-pages.patch queue-4.9/qed-fix-overriding-of-supported-autoneg-value.patch

6 years, 9 months

1
0
0 0

Patch "Bluetooth: Send HCI Set Event Mask Page 2 command only when needed" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: Send HCI Set Event Mask Page 2 command only when needed to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-send-hci-set-event-mask-page-2-command-only-when-needed.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Marcel Holtmann <marcel(a)holtmann.org> Date: Fri, 9 Jun 2017 18:43:56 +0200 Subject: Bluetooth: Send HCI Set Event Mask Page 2 command only when needed From: Marcel Holtmann <marcel(a)holtmann.org> [ Upstream commit 313f6888c8fbb1bc8b36c9012ce4e1de848df696 ] The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Reported-by: Sedat Dilek <sedat.dilek(a)gmail.com> Tested-by: Sedat Dilek <sedat.dilek(a)gmail.com> Signed-off-by: Szymon Janc <szymon.janc(a)codecoup.pl> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/bluetooth/hci_core.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -548,6 +548,7 @@ static void hci_set_event_mask_page_2(st { struct hci_dev *hdev = req->hdev; u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + bool changed = false; /* If Connectionless Slave Broadcast master role is supported * enable all necessary events for it. @@ -557,6 +558,7 @@ static void hci_set_event_mask_page_2(st events[1] |= 0x80; /* Synchronization Train Complete */ events[2] |= 0x10; /* Slave Page Response Timeout */ events[2] |= 0x20; /* CSB Channel Map Change */ + changed = true; } /* If Connectionless Slave Broadcast slave role is supported @@ -567,13 +569,24 @@ static void hci_set_event_mask_page_2(st events[2] |= 0x02; /* CSB Receive */ events[2] |= 0x04; /* CSB Timeout */ events[2] |= 0x08; /* Truncated Page Complete */ + changed = true; } /* Enable Authenticated Payload Timeout Expired event if supported */ - if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) + if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { events[2] |= 0x80; + changed = true; + } - hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events); + /* Some Broadcom based controllers indicate support for Set Event + * Mask Page 2 command, but then actually do not support it. Since + * the default value is all bits set to zero, the command is only + * required if the event mask has to be changed. In case no change + * to the event mask is needed, skip this command. + */ + if (changed) + hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, + sizeof(events), events); } static int hci_init3_req(struct hci_request *req, unsigned long opt) Patches currently in stable-queue which might be from marcel(a)holtmann.org are queue-4.9/bluetooth-send-hci-set-event-mask-page-2-command-only-when-needed.patch queue-4.9/net-ieee802154-fix-net_device-reference-release-too-early.patch

6 years, 9 months

1
0
0 0

Patch "bna: Avoid reading past end of buffer" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled bna: Avoid reading past end of buffer to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bna-avoid-reading-past-end-of-buffer.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Kees Cook <keescook(a)chromium.org> Date: Fri, 5 May 2017 15:25:32 -0700 Subject: bna: Avoid reading past end of buffer From: Kees Cook <keescook(a)chromium.org> [ Upstream commit 9e4eb1ce472fbf7b007f23c88ec11c37265e401c ] Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, use strncpy() which will fill the trailing bytes with zeros. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay(a)gmail.com> Signed-off-by: Kees Cook <keescook(a)chromium.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/brocade/bna/bfa_ioc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/ethernet/brocade/bna/bfa_ioc.c +++ b/drivers/net/ethernet/brocade/bna/bfa_ioc.c @@ -2845,7 +2845,7 @@ bfa_ioc_get_adapter_optrom_ver(struct bf static void bfa_ioc_get_adapter_manufacturer(struct bfa_ioc *ioc, char *manufacturer) { - memcpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN); + strncpy(manufacturer, BFA_MFG_NAME, BFA_ADAPTER_MFG_NAME_LEN); } static void Patches currently in stable-queue which might be from keescook(a)chromium.org are queue-4.9/qlge-avoid-reading-past-end-of-buffer.patch queue-4.9/pidns-disable-pid-allocation-if-pid_ns_prepare_proc-is-failed-in-alloc_pid.patch queue-4.9/x86-mm-kaslr-use-the-_asm_mul-macro-for-multiplication-to-work-around-clang-incompatibility.patch queue-4.9/ray_cs-avoid-reading-past-end-of-buffer.patch queue-4.9/x86-boot-declare-error-as-noreturn.patch queue-4.9/selftests-kselftest_harness-fix-compile-warning.patch queue-4.9/bna-avoid-reading-past-end-of-buffer.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2018