November 2018 - Linux-stable-mirror

patch "USB: misc: appledisplay: add 20" Apple Cinema Display" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: misc: appledisplay: add 20" Apple Cinema Display to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From f6501f49199097b99e4e263644d88c90d1ec1060 Mon Sep 17 00:00:00 2001 From: Mattias Jacobsson <2pi(a)mok.nu> Date: Sun, 21 Oct 2018 11:25:37 +0200 Subject: USB: misc: appledisplay: add 20" Apple Cinema Display Add another Apple Cinema Display to the list of supported displays Signed-off-by: Mattias Jacobsson <2pi(a)mok.nu> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/misc/appledisplay.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index bd539f3058bc..85b48c6ddc7e 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -50,6 +50,7 @@ static const struct usb_device_id appledisplay_table[] = { { APPLEDISPLAY_DEVICE(0x9219) }, { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, + { APPLEDISPLAY_DEVICE(0x9222) }, { APPLEDISPLAY_DEVICE(0x9236) }, /* Terminating entry */ -- 2.19.1

6 years, 2 months

1
0
0 0

patch "usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From a77112577667cbda7c6292c52d909636aef31fd9 Mon Sep 17 00:00:00 2001 From: Emmanuel Pescosta <emmanuelpescosta099(a)gmail.com> Date: Fri, 26 Oct 2018 14:48:09 +0200 Subject: usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 4d7d948eae63..64df444af229 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -397,6 +397,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, + /* Corsair K70 LUX RGB */ + { USB_DEVICE(0x1b1c, 0x1b33), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Corsair K70 LUX */ { USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT }, -- 2.19.1

6 years, 2 months

1
0
0 0

patch "USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 781f0766cc41a9dd2e5d118ef4b1d5d89430257b Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Fri, 19 Oct 2018 16:14:50 +0800 Subject: USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub Devices connected under Terminus Technology Inc. Hub (1a40:0101) may fail to work after the system resumes from suspend: [ 206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd [ 206.143691] usb 3-2.4: device descriptor read/64, error -32 [ 206.351671] usb 3-2.4: device descriptor read/64, error -32 Info for this hub: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1a40 ProdID=0101 Rev=01.11 S: Product=USB 2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub Some expirements indicate that the USB devices connected to the hub are innocent, it's the hub itself is to blame. The hub needs extra delay time after it resets its port. Hence wait for extra delay, if the device is connected to this quirky hub. Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Cc: stable <stable(a)vger.kernel.org> Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/admin-guide/kernel-parameters.txt | 2 ++ drivers/usb/core/hub.c | 14 +++++++++++--- drivers/usb/core/quirks.c | 6 ++++++ include/linux/usb/quirks.h | 3 +++ 4 files changed, 22 insertions(+), 3 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 81d1d5a74728..19f4423e70d9 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -4713,6 +4713,8 @@ prevent spurious wakeup); n = USB_QUIRK_DELAY_CTRL_MSG (Device needs a pause after every control message); + o = USB_QUIRK_HUB_SLOW_RESET (Hub needs extra + delay after resetting its port); Example: quirks=0781:5580:bk,0a5c:5834:gij usbhid.mousepoll= diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c6077d582d29..d9bd7576786a 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2794,6 +2794,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, int i, status; u16 portchange, portstatus; struct usb_port *port_dev = hub->ports[port1 - 1]; + int reset_recovery_time; if (!hub_is_superspeed(hub->hdev)) { if (warm) { @@ -2885,11 +2886,18 @@ static int hub_port_reset(struct usb_hub *hub, int port1, done: if (status == 0) { - /* TRSTRCY = 10 ms; plus some extra */ if (port_dev->quirks & USB_PORT_QUIRK_FAST_ENUM) usleep_range(10000, 12000); - else - msleep(10 + 40); + else { + /* TRSTRCY = 10 ms; plus some extra */ + reset_recovery_time = 10 + 40; + + /* Hub needs extra delay after resetting its port. */ + if (hub->hdev->quirks & USB_QUIRK_HUB_SLOW_RESET) + reset_recovery_time += 100; + + msleep(reset_recovery_time); + } if (udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 178d6c6063c0..4d7d948eae63 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -128,6 +128,9 @@ static int quirks_param_set(const char *val, const struct kernel_param *kp) case 'n': flags |= USB_QUIRK_DELAY_CTRL_MSG; break; + case 'o': + flags |= USB_QUIRK_HUB_SLOW_RESET; + break; /* Ignore unrecognized flag characters */ } } @@ -380,6 +383,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Terminus Technology Inc. Hub */ + { USB_DEVICE(0x1a40, 0x0101), .driver_info = USB_QUIRK_HUB_SLOW_RESET }, + /* Corsair K70 RGB */ { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT }, diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index b7a99ce56bc9..a1be64c9940f 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -66,4 +66,7 @@ /* Device needs a pause after every control message. */ #define USB_QUIRK_DELAY_CTRL_MSG BIT(13) +/* Hub needs extra delay after resetting its port. */ +#define USB_QUIRK_HUB_SLOW_RESET BIT(14) + #endif /* __LINUX_USB_QUIRKS_H */ -- 2.19.1

6 years, 2 months

1
0
0 0

patch "staging: rtl8723bs: Fix incorrect sense of ether_addr_equal" added to staging-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: rtl8723bs: Fix incorrect sense of ether_addr_equal to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From c948c6915b620f075496846df8d4487ee0c56121 Mon Sep 17 00:00:00 2001 From: Larry Finger <Larry.Finger(a)lwfinger.net> Date: Tue, 6 Nov 2018 21:33:14 -0600 Subject: staging: rtl8723bs: Fix incorrect sense of ether_addr_equal In commit b37f9e1c3801 ("staging: rtl8723bs: Fix lines too long in update_recvframe_attrib()."), the refactoring involved replacing two memcmp() calls with ether_addr_equal() calls. What the author missed is that memcmp() returns false when the two strings are equal, whereas ether_addr_equal() returns true when the two addresses are equal. One side effect of this error is that the strength of an unassociated AP was much stronger than the same AP after association. This bug is reported at bko#201611. Fixes: b37f9e1c3801 ("staging: rtl8723bs: Fix lines too long in update_recvframe_attrib().") Cc: Stable <stable(a)vger.kernel.org> Cc: youling257 <youling257(a)gmail.com> Cc: u.srikant.patnaik(a)gmail.com Reported-and-tested-by: youling257 <youling257(a)gmail.com> Signed-off-by: Larry Finger <Larry.Finger(a)lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c b/drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c index 85077947b9b8..85aba8a503cd 100644 --- a/drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c +++ b/drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c @@ -109,12 +109,12 @@ static void update_recvframe_phyinfo(union recv_frame *precvframe, rx_bssid = get_hdr_bssid(wlanhdr); pkt_info.bssid_match = ((!IsFrameTypeCtrl(wlanhdr)) && !pattrib->icv_err && !pattrib->crc_err && - !ether_addr_equal(rx_bssid, my_bssid)); + ether_addr_equal(rx_bssid, my_bssid)); rx_ra = get_ra(wlanhdr); my_hwaddr = myid(&padapter->eeprompriv); pkt_info.to_self = pkt_info.bssid_match && - !ether_addr_equal(rx_ra, my_hwaddr); + ether_addr_equal(rx_ra, my_hwaddr); pkt_info.is_beacon = pkt_info.bssid_match && -- 2.19.1

6 years, 2 months

1
0
0 0

patch "staging: mt7621-dma: fix potentially dereferencing uninitialized" added to staging-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: mt7621-dma: fix potentially dereferencing uninitialized to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 354e379684fcc70ab8d5450b4d57bd92b5294dfd Mon Sep 17 00:00:00 2001 From: Sergio Paracuellos <sergio.paracuellos(a)gmail.com> Date: Sat, 20 Oct 2018 13:31:06 +0200 Subject: staging: mt7621-dma: fix potentially dereferencing uninitialized 'tx_desc' Function 'mtk_hsdma_start_transfer' uses 'tx_desc' pointer which can be dereferenced before it is initializated. Initializate pointer before avoiding the problem. Fixes: 0853c7a53eb3 ("staging: mt7621-dma: ralink: add rt2880 dma engine") Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/mt7621-dma/mtk-hsdma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/mt7621-dma/mtk-hsdma.c b/drivers/staging/mt7621-dma/mtk-hsdma.c index df6ebf41bdea..5831f816c17b 100644 --- a/drivers/staging/mt7621-dma/mtk-hsdma.c +++ b/drivers/staging/mt7621-dma/mtk-hsdma.c @@ -335,6 +335,8 @@ static int mtk_hsdma_start_transfer(struct mtk_hsdam_engine *hsdma, /* tx desc */ src = sg->src_addr; for (i = 0; i < chan->desc->num_sgs; i++) { + tx_desc = &chan->tx_ring[chan->tx_idx]; + if (len > HSDMA_MAX_PLEN) tlen = HSDMA_MAX_PLEN; else @@ -344,7 +346,6 @@ static int mtk_hsdma_start_transfer(struct mtk_hsdam_engine *hsdma, tx_desc->addr1 = src; tx_desc->flags |= HSDMA_DESC_PLEN1(tlen); } else { - tx_desc = &chan->tx_ring[chan->tx_idx]; tx_desc->addr0 = src; tx_desc->flags = HSDMA_DESC_PLEN0(tlen); -- 2.19.1

6 years, 2 months

1
0
0 0

[PATCH] x86/speculation: Support Enhanced IBRS on future CPUs

by Sai Praneeth Prakhya

From: Sai Praneeth <sai.praneeth.prakhya(a)intel.com> [ Upstream commit 706d51681d636a0c4a5ef53395ec3b803e45ed4d ] Changes from upstream: ---------------------- 1. Use bit 30 of word 7 in cpufeatures for X86_FEATURE_IBRS_ENHANCED as bit 29 is now used by L1TF. 2. Fix some trivial line fuzzing. Note: Based on kernel version "Linux 4.18.17" and to be applied on both "Linux 4.18.17" and "Linux 4.14.79". Commit message from upstream: ----------------------------- Future Intel processors will support "Enhanced IBRS" which is an "always on" mode i.e. IBRS bit in SPEC_CTRL MSR is enabled once and never disabled. >From the specification [1]: "With enhanced IBRS, the predicted targets of indirect branches executed cannot be controlled by software that was executed in a less privileged predictor mode or on another logical processor. As a result, software operating on a processor with enhanced IBRS need not use WRMSR to set IA32_SPEC_CTRL.IBRS after every transition to a more privileged predictor mode. Software can isolate predictor modes effectively simply by setting the bit once. Software need not disable enhanced IBRS prior to entering a sleep state such as MWAIT or HLT." If Enhanced IBRS is supported by the processor then use it as the preferred spectre v2 mitigation mechanism instead of Retpoline. Intel's Retpoline white paper [2] states: "Retpoline is known to be an effective branch target injection (Spectre variant 2) mitigation on Intel processors belonging to family 6 (enumerated by the CPUID instruction) that do not have support for enhanced IBRS. On processors that support enhanced IBRS, it should be used for mitigation instead of retpoline." The reason why Enhanced IBRS is the recommended mitigation on processors which support it is that these processors also support CET which provides a defense against ROP attacks. Retpoline is very similar to ROP techniques and might trigger false positives in the CET defense. If Enhanced IBRS is selected as the mitigation technique for spectre v2, the IBRS bit in SPEC_CTRL MSR is set once at boot time and never cleared. Kernel also has to make sure that IBRS bit remains set after VMEXIT because the guest might have cleared the bit. This is already covered by the existing x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() speculation control functions. Enhanced IBRS still requires IBPB for full mitigation. [1] Speculative-Execution-Side-Channel-Mitigations.pdf [2] Retpoline-A-Branch-Target-Injection-Mitigation.pdf Both documents are available at: https://bugzilla.kernel.org/show_bug.cgi?id=199511 Originally-by: David Woodhouse <dwmw(a)amazon.co.uk> Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya(a)intel.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Tim C Chen <tim.c.chen(a)intel.com> Cc: Dave Hansen <dave.hansen(a)intel.com> Cc: Ravi Shankar <ravi.v.shankar(a)intel.com> Cc: Andi Kleen <ak(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> --- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/nospec-branch.h | 1 + arch/x86/kernel/cpu/bugs.c | 20 ++++++++++++++++++-- arch/x86/kernel/cpu/common.c | 3 +++ 4 files changed, 23 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index 64aaa3f5f36c..c8ac84e90d0f 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -220,6 +220,7 @@ #define X86_FEATURE_STIBP ( 7*32+27) /* Single Thread Indirect Branch Predictors */ #define X86_FEATURE_ZEN ( 7*32+28) /* "" CPU is AMD family 0x17 (Zen) */ #define X86_FEATURE_L1TF_PTEINV ( 7*32+29) /* "" L1TF workaround PTE inversion */ +#define X86_FEATURE_IBRS_ENHANCED ( 7*32+30) /* Enhanced IBRS */ /* Virtualization flags: Linux defined, word 8 */ #define X86_FEATURE_TPR_SHADOW ( 8*32+ 0) /* Intel TPR Shadow */ diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h index f6f6c63da62f..e7c8086e570e 100644 --- a/arch/x86/include/asm/nospec-branch.h +++ b/arch/x86/include/asm/nospec-branch.h @@ -215,6 +215,7 @@ enum spectre_v2_mitigation { SPECTRE_V2_RETPOLINE_GENERIC, SPECTRE_V2_RETPOLINE_AMD, SPECTRE_V2_IBRS, + SPECTRE_V2_IBRS_ENHANCED, }; /* The Speculative Store Bypass disable variants */ diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 4891a621a752..817e57e96d67 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -141,6 +141,7 @@ static const char *spectre_v2_strings[] = { [SPECTRE_V2_RETPOLINE_MINIMAL_AMD] = "Vulnerable: Minimal AMD ASM retpoline", [SPECTRE_V2_RETPOLINE_GENERIC] = "Mitigation: Full generic retpoline", [SPECTRE_V2_RETPOLINE_AMD] = "Mitigation: Full AMD retpoline", + [SPECTRE_V2_IBRS_ENHANCED] = "Mitigation: Enhanced IBRS", }; #undef pr_fmt @@ -343,6 +344,13 @@ static void __init spectre_v2_select_mitigation(void) case SPECTRE_V2_CMD_FORCE: case SPECTRE_V2_CMD_AUTO: + if (boot_cpu_has(X86_FEATURE_IBRS_ENHANCED)) { + mode = SPECTRE_V2_IBRS_ENHANCED; + /* Force it so VMEXIT will restore correctly */ + x86_spec_ctrl_base |= SPEC_CTRL_IBRS; + wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base); + goto specv2_set_mode; + } if (IS_ENABLED(CONFIG_RETPOLINE)) goto retpoline_auto; break; @@ -380,6 +388,7 @@ static void __init spectre_v2_select_mitigation(void) setup_force_cpu_cap(X86_FEATURE_RETPOLINE); } +specv2_set_mode: spectre_v2_enabled = mode; pr_info("%s\n", spectre_v2_strings[mode]); @@ -402,9 +411,16 @@ static void __init spectre_v2_select_mitigation(void) /* * Retpoline means the kernel is safe because it has no indirect - * branches. But firmware isn't, so use IBRS to protect that. + * branches. Enhanced IBRS protects firmware too, so, enable restricted + * speculation around firmware calls only when Enhanced IBRS isn't + * supported. + * + * Use "mode" to check Enhanced IBRS instead of boot_cpu_has(), because + * the user might select retpoline on the kernel command line and if + * the CPU supports Enhanced IBRS, kernel might un-intentionally not + * enable IBRS around firmware calls. */ - if (boot_cpu_has(X86_FEATURE_IBRS)) { + if (boot_cpu_has(X86_FEATURE_IBRS) && mode != SPECTRE_V2_IBRS_ENHANCED) { setup_force_cpu_cap(X86_FEATURE_USE_IBRS_FW); pr_info("Enabling Restricted Speculation for firmware calls\n"); } diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 1ee8ea36af30..79561bfcfa87 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1015,6 +1015,9 @@ static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c) !cpu_has(c, X86_FEATURE_AMD_SSB_NO)) setup_force_cpu_bug(X86_BUG_SPEC_STORE_BYPASS); + if (ia32_cap & ARCH_CAP_IBRS_ALL) + setup_force_cpu_cap(X86_FEATURE_IBRS_ENHANCED); + if (x86_match_cpu(cpu_no_meltdown)) return; -- 2.7.4

6 years, 2 months

2
1
0 0

stable-rc/linux-4.19.y boot: 100 boots: 3 failed, 96 passed with 1 offline (v4.19.1)

by kernelci.org bot

stable-rc/linux-4.19.y boot: 100 boots: 3 failed, 96 passed with 1 offline (v4.19.1) Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.1… Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.1/ Tree: stable-rc Branch: linux-4.19.y Git Describe: v4.19.1 Git Commit: 07a03b97b9ce2a6430344386eeab9b16283b893f Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Tested: 57 unique boards, 21 SoC families, 15 builds out of 187 Boot Failures Detected: arm: omap2plus_defconfig omap3-beagle-xm: 1 failed lab multi_v7_defconfig omap3-beagle-xm: 1 failed lab arm64: defconfig meson-gxbb-nanopi-k2: 1 failed lab Offline Platforms: arm64: defconfig: meson-gxl-s905d-p230: 1 offline lab --- For more info write to <info(a)kernelci.org>

6 years, 2 months

1
0
0 0

stable/linux-4.19.y boot: 100 boots: 1 failed, 98 passed with 1 offline (v4.19.1)

by kernelci.org bot

stable/linux-4.19.y boot: 100 boots: 1 failed, 98 passed with 1 offline (v4.19.1) Full Boot Summary: https://kernelci.org/boot/all/job/stable/branch/linux-4.19.y/kernel/v4.19.1/ Full Build Summary: https://kernelci.org/build/stable/branch/linux-4.19.y/kernel/v4.19.1/ Tree: stable Branch: linux-4.19.y Git Describe: v4.19.1 Git Commit: 07a03b97b9ce2a6430344386eeab9b16283b893f Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git Tested: 57 unique boards, 21 SoC families, 15 builds out of 185 Boot Failure Detected: arm: multi_v7_defconfig omap3-beagle-xm: 1 failed lab Offline Platforms: arm64: defconfig: meson-gxl-s905d-p230: 1 offline lab --- For more info write to <info(a)kernelci.org>

6 years, 2 months

1
0
0 0

[PATCH] staging: rtl8723bs: Fix incorrect sense of ether_addr_equal

by Larry Finger

In commit b37f9e1c3801 ("staging: rtl8723bs: Fix lines too long in update_recvframe_attrib()."), the refactoring involved replacing two memcmp() calls with ether_addr_equal() calls. What the author missed is that memcmp() returns false when the two strings are equal, whereas ether_addr_equal() returns true when the two addresses are equal. One side effect of this error is that the strength of an unassociated AP was much stronger than the same AP after association. This bug is reported at bko#201611. Fixes: b37f9e1c3801 ("staging: rtl8723bs: Fix lines too long in update_recvframe_attrib().") Cc: Stable <stable(a)vger.kernel.org> Cc: youling257 <youling257(a)gmail.com> Cc: u.srikant.patnaik(a)gmail.com Reported-and-tested-by: youling257 <youling257(a)gmail.com> Signed-off-by: Larry Finger <Larry.Finger(a)lwfinger.net> --- drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c b/drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c index 85077947b9b8..85aba8a503cd 100644 --- a/drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c +++ b/drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c @@ -109,12 +109,12 @@ static void update_recvframe_phyinfo(union recv_frame *precvframe, rx_bssid = get_hdr_bssid(wlanhdr); pkt_info.bssid_match = ((!IsFrameTypeCtrl(wlanhdr)) && !pattrib->icv_err && !pattrib->crc_err && - !ether_addr_equal(rx_bssid, my_bssid)); + ether_addr_equal(rx_bssid, my_bssid)); rx_ra = get_ra(wlanhdr); my_hwaddr = myid(&padapter->eeprompriv); pkt_info.to_self = pkt_info.bssid_match && - !ether_addr_equal(rx_ra, my_hwaddr); + ether_addr_equal(rx_ra, my_hwaddr); pkt_info.is_beacon = pkt_info.bssid_match && -- 2.19.1

6 years, 2 months

1
0
0 0

[PATCH 4.9 00/24] V4.9 backport of 32-bit arm spectre patches

by David Long

From: "David A. Long" <dave.long(a)linaro.org> V4.9 backport of spectre patches from Russell M. King's spectre branch. Patches not yet in upstream are excluded. Marc Zyngier (2): ARM: KVM: invalidate BTB on guest exit for Cortex-A12/A17 ARM: KVM: invalidate icache on guest exit for Cortex-A15 Russell King (22): ARM: add more CPU part numbers for Cortex and Brahma B15 CPUs ARM: bugs: prepare processor bug infrastructure ARM: bugs: hook processor bug checking into SMP and suspend paths ARM: bugs: add support for per-processor bug checking ARM: spectre: add Kconfig symbol for CPUs vulnerable to Spectre ARM: spectre-v2: harden branch predictor on context switches ARM: spectre-v2: add Cortex A8 and A15 validation of the IBE bit ARM: spectre-v2: harden user aborts in kernel space ARM: spectre-v2: add firmware based hardening ARM: spectre-v2: warn about incorrect context switching functions ARM: spectre-v2: KVM: invalidate icache on guest exit for Brahma B15 ARM: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling ARM: KVM: report support for SMCCC_ARCH_WORKAROUND_1 ARM: spectre-v1: add speculation barrier (csdb) macros ARM: spectre-v1: add array_index_mask_nospec() implementation ARM: spectre-v1: fix syscall entry ARM: signal: copy registers using __copy_from_user() ARM: vfp: use __copy_from_user() when restoring VFP state ARM: oabi-compat: copy semops using __copy_from_user() ARM: use __inttype() in get_user() ARM: spectre-v1: use get_user() for __get_user() ARM: spectre-v1: mitigate user accesses arch/arm/include/asm/assembler.h | 12 ++ arch/arm/include/asm/barrier.h | 32 ++++++ arch/arm/include/asm/bugs.h | 6 +- arch/arm/include/asm/cp15.h | 3 + arch/arm/include/asm/cputype.h | 8 ++ arch/arm/include/asm/kvm_asm.h | 2 - arch/arm/include/asm/kvm_host.h | 14 ++- arch/arm/include/asm/kvm_mmu.h | 23 +++- arch/arm/include/asm/proc-fns.h | 4 + arch/arm/include/asm/system_misc.h | 15 +++ arch/arm/include/asm/thread_info.h | 4 +- arch/arm/include/asm/uaccess.h | 26 +++-- arch/arm/kernel/Makefile | 1 + arch/arm/kernel/bugs.c | 18 +++ arch/arm/kernel/entry-common.S | 18 ++- arch/arm/kernel/entry-header.S | 25 +++++ arch/arm/kernel/signal.c | 55 ++++----- arch/arm/kernel/smp.c | 4 + arch/arm/kernel/suspend.c | 2 + arch/arm/kernel/sys_oabi-compat.c | 8 +- arch/arm/kvm/hyp/hyp-entry.S | 110 +++++++++++++++++- arch/arm/lib/copy_from_user.S | 9 ++ arch/arm/mm/Kconfig | 23 ++++ arch/arm/mm/Makefile | 2 +- arch/arm/mm/fault.c | 3 + arch/arm/mm/proc-macros.S | 3 +- arch/arm/mm/proc-v7-2level.S | 6 - arch/arm/mm/proc-v7-bugs.c | 174 +++++++++++++++++++++++++++++ arch/arm/mm/proc-v7.S | 154 +++++++++++++++++++------ arch/arm/vfp/vfpmodule.c | 17 ++- 30 files changed, 674 insertions(+), 107 deletions(-) create mode 100644 arch/arm/kernel/bugs.c create mode 100644 arch/arm/mm/proc-v7-bugs.c -- 2.17.1

6 years, 2 months

5
39
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2018