Here is the 2nd part of converting net selftests to run in unique namespace. This part converts all bridge, vxlan, vrf tests.
Here is the part 1 link: https://lore.kernel.org/netdev/20231202020110.362433-1-liuhangbin@gmail.com
Hangbin Liu (9): selftests/net: convert test_bridge_backup_port.sh to run it in unique namespace selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace selftests/net: convert test_vxlan_mdb.sh to run it in unique namespace selftests/net: convert test_vxlan_nolocalbypass.sh to run it in unique namespace selftests/net: convert test_vxlan_under_vrf.sh to run it in unique namespace selftests/net: convert test_vxlan_vnifiltering.sh to run it in unique namespace selftests/net: convert vrf_route_leaking.sh to run it in unique namespace selftests/net: convert vrf_strict_mode_test.sh to run it in unique namespace selftests/net: convert vrf-xfrm-tests.sh to run it in unique namespace
.../selftests/net/test_bridge_backup_port.sh | 371 +++++++++--------- .../net/test_bridge_neigh_suppress.sh | 331 ++++++++-------- tools/testing/selftests/net/test_vxlan_mdb.sh | 202 +++++----- .../selftests/net/test_vxlan_nolocalbypass.sh | 48 ++- .../selftests/net/test_vxlan_under_vrf.sh | 70 ++-- .../selftests/net/test_vxlan_vnifiltering.sh | 154 +++++--- tools/testing/selftests/net/vrf-xfrm-tests.sh | 77 ++-- .../selftests/net/vrf_route_leaking.sh | 201 +++++----- .../selftests/net/vrf_strict_mode_test.sh | 47 ++- 9 files changed, 751 insertions(+), 750 deletions(-)
There is no h1 h2 actually. Remove it. Here is the test result after conversion.
]# ./test_bridge_backup_port.sh
Backup port ----------- TEST: Forwarding out of swp1 [ OK ] TEST: No forwarding out of vx0 [ OK ] TEST: swp1 carrier off [ OK ] TEST: No forwarding out of swp1 [ OK ] ... Backup nexthop ID - ping ------------------------ TEST: Ping with backup nexthop ID [ OK ] TEST: Ping after disabling backup nexthop ID [ OK ]
Backup nexthop ID - torture test -------------------------------- TEST: Torture test [ OK ]
Tests passed: 83 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../selftests/net/test_bridge_backup_port.sh | 371 +++++++++--------- 1 file changed, 182 insertions(+), 189 deletions(-)
diff --git a/tools/testing/selftests/net/test_bridge_backup_port.sh b/tools/testing/selftests/net/test_bridge_backup_port.sh index 112cfd8a10ad..70a7d87ba2d2 100755 --- a/tools/testing/selftests/net/test_bridge_backup_port.sh +++ b/tools/testing/selftests/net/test_bridge_backup_port.sh @@ -35,9 +35,8 @@ # | sw1 | | sw2 | # +------------------------------------+ +------------------------------------+
+source lib.sh ret=0 -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4
# All tests in this script. Can be overridden with -t option. TESTS=" @@ -132,9 +131,6 @@ setup_topo_ns() { local ns=$1; shift
- ip netns add $ns - ip -n $ns link set dev lo up - ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1 ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0 @@ -145,13 +141,14 @@ setup_topo() { local ns
- for ns in sw1 sw2; do + setup_ns sw1 sw2 + for ns in $sw1 $sw2; do setup_topo_ns $ns done
ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns sw1 name veth0 - ip link set dev veth1 netns sw2 name veth0 + ip link set dev veth0 netns $sw1 name veth0 + ip link set dev veth1 netns $sw2 name veth0 }
setup_sw_common() @@ -190,7 +187,7 @@ setup_sw_common()
setup_sw1() { - local ns=sw1 + local ns=$sw1 local local_addr=192.0.2.33 local remote_addr=192.0.2.34 local veth_addr=192.0.2.49 @@ -203,7 +200,7 @@ setup_sw1()
setup_sw2() { - local ns=sw2 + local ns=$sw2 local local_addr=192.0.2.34 local remote_addr=192.0.2.33 local veth_addr=192.0.2.50 @@ -229,11 +226,7 @@ setup()
cleanup() { - local ns - - for ns in h1 h2 sw1 sw2; do - ip netns del $ns &> /dev/null - done + cleanup_ns $sw1 $sw2 }
################################################################################ @@ -248,85 +241,85 @@ backup_port() echo "Backup port" echo "-----------"
- run_cmd "tc -n sw1 qdisc replace dev swp1 clsact" - run_cmd "tc -n sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass" + run_cmd "tc -n $sw1 qdisc replace dev swp1 clsact" + run_cmd "tc -n $sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10" + run_cmd "bridge -n $sw1 fdb replace $dmac dev swp1 master static vlan 10"
# Initial state - check that packets are forwarded out of swp1 when it # has a carrier and not forwarded out of any port when it does not have # a carrier. - run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 1 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 1 log_test $? 0 "Forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 0 + tc_check_packets $sw1 "dev vx0 egress" 101 0 log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off" + run_cmd "ip -n $sw1 link set dev swp1 carrier off" log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 1 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 1 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 0 + tc_check_packets $sw1 "dev vx0 egress" 101 0 log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier on" + run_cmd "ip -n $sw1 link set dev swp1 carrier on" log_test $? 0 "swp1 carrier on"
# Configure vx0 as the backup port of swp1 and check that packets are # forwarded out of swp1 when it has a carrier and out of vx0 when swp1 # does not have a carrier. - run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_port vx0"" + run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_port vx0"" log_test $? 0 "vx0 configured as backup port of swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 2 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 2 log_test $? 0 "Forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 0 + tc_check_packets $sw1 "dev vx0 egress" 101 0 log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off" + run_cmd "ip -n $sw1 link set dev swp1 carrier off" log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 2 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 2 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "Forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier on" + run_cmd "ip -n $sw1 link set dev swp1 carrier on" log_test $? 0 "swp1 carrier on"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 3 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 3 log_test $? 0 "Forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "No forwarding out of vx0"
# Remove vx0 as the backup port of swp1 and check that packets are no # longer forwarded out of vx0 when swp1 does not have a carrier. - run_cmd "bridge -n sw1 link set dev swp1 nobackup_port" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_port vx0"" + run_cmd "bridge -n $sw1 link set dev swp1 nobackup_port" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_port vx0"" log_test $? 1 "vx0 not configured as backup port of swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 4 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 4 log_test $? 0 "Forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off" + run_cmd "ip -n $sw1 link set dev swp1 carrier off" log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 4 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 4 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "No forwarding out of vx0" }
@@ -339,125 +332,125 @@ backup_nhid() echo "Backup nexthop ID" echo "-----------------"
- run_cmd "tc -n sw1 qdisc replace dev swp1 clsact" - run_cmd "tc -n sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass" + run_cmd "tc -n $sw1 qdisc replace dev swp1 clsact" + run_cmd "tc -n $sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb" - run_cmd "ip -n sw1 nexthop replace id 2 via 192.0.2.34 fdb" - run_cmd "ip -n sw1 nexthop replace id 10 group 1/2 fdb" + run_cmd "ip -n $sw1 nexthop replace id 1 via 192.0.2.34 fdb" + run_cmd "ip -n $sw1 nexthop replace id 2 via 192.0.2.34 fdb" + run_cmd "ip -n $sw1 nexthop replace id 10 group 1/2 fdb"
- run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10" - run_cmd "bridge -n sw1 fdb replace $dmac dev vx0 self static dst 192.0.2.36 src_vni 10010" + run_cmd "bridge -n $sw1 fdb replace $dmac dev swp1 master static vlan 10" + run_cmd "bridge -n $sw1 fdb replace $dmac dev vx0 self static dst 192.0.2.36 src_vni 10010"
- run_cmd "ip -n sw2 address replace 192.0.2.36/32 dev lo" + run_cmd "ip -n $sw2 address replace 192.0.2.36/32 dev lo"
# The first filter matches on packets forwarded using the backup # nexthop ID and the second filter matches on packets forwarded using a # regular VXLAN FDB entry. - run_cmd "tc -n sw2 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass" - run_cmd "tc -n sw2 filter replace dev vx0 ingress pref 1 handle 102 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.36 action pass" + run_cmd "tc -n $sw2 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass" + run_cmd "tc -n $sw2 filter replace dev vx0 ingress pref 1 handle 102 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.36 action pass"
# Configure vx0 as the backup port of swp1 and check that packets are # forwarded out of swp1 when it has a carrier and out of vx0 when swp1 # does not have a carrier. When packets are forwarded out of vx0, check # that they are forwarded by the VXLAN FDB entry. - run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_port vx0"" + run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_port vx0"" log_test $? 0 "vx0 configured as backup port of swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 1 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 1 log_test $? 0 "Forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 0 + tc_check_packets $sw1 "dev vx0 egress" 101 0 log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off" + run_cmd "ip -n $sw1 link set dev swp1 carrier off" log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 1 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 1 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "Forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 0 + tc_check_packets $sw2 "dev vx0 ingress" 101 0 log_test $? 0 "No forwarding using backup nexthop ID" - tc_check_packets sw2 "dev vx0 ingress" 102 1 + tc_check_packets $sw2 "dev vx0 ingress" 102 1 log_test $? 0 "Forwarding using VXLAN FDB entry"
- run_cmd "ip -n sw1 link set dev swp1 carrier on" + run_cmd "ip -n $sw1 link set dev swp1 carrier on" log_test $? 0 "swp1 carrier on"
# Configure nexthop ID 10 as the backup nexthop ID of swp1 and check # that when packets are forwarded out of vx0, they are forwarded using # the backup nexthop ID. - run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_nhid 10"" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 10" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_nhid 10"" log_test $? 0 "nexthop ID 10 configured as backup nexthop ID of swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 2 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 2 log_test $? 0 "Forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "No forwarding out of vx0"
- run_cmd "ip -n sw1 link set dev swp1 carrier off" + run_cmd "ip -n $sw1 link set dev swp1 carrier off" log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 2 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 2 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "Forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 1 + tc_check_packets $sw2 "dev vx0 ingress" 101 1 log_test $? 0 "Forwarding using backup nexthop ID" - tc_check_packets sw2 "dev vx0 ingress" 102 1 + tc_check_packets $sw2 "dev vx0 ingress" 102 1 log_test $? 0 "No forwarding using VXLAN FDB entry"
- run_cmd "ip -n sw1 link set dev swp1 carrier on" + run_cmd "ip -n $sw1 link set dev swp1 carrier on" log_test $? 0 "swp1 carrier on"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 3 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 3 log_test $? 0 "Forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "No forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 1 + tc_check_packets $sw2 "dev vx0 ingress" 101 1 log_test $? 0 "No forwarding using backup nexthop ID" - tc_check_packets sw2 "dev vx0 ingress" 102 1 + tc_check_packets $sw2 "dev vx0 ingress" 102 1 log_test $? 0 "No forwarding using VXLAN FDB entry"
# Reset the backup nexthop ID to 0 and check that packets are no longer # forwarded using the backup nexthop ID when swp1 does not have a # carrier and are instead forwarded by the VXLAN FDB. - run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 0" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_nhid"" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 0" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_nhid"" log_test $? 1 "No backup nexthop ID configured for swp1"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 4 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 4 log_test $? 0 "Forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "No forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 1 + tc_check_packets $sw2 "dev vx0 ingress" 101 1 log_test $? 0 "No forwarding using backup nexthop ID" - tc_check_packets sw2 "dev vx0 ingress" 102 1 + tc_check_packets $sw2 "dev vx0 ingress" 102 1 log_test $? 0 "No forwarding using VXLAN FDB entry"
- run_cmd "ip -n sw1 link set dev swp1 carrier off" + run_cmd "ip -n $sw1 link set dev swp1 carrier off" log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 4 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 4 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "Forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 1 + tc_check_packets $sw2 "dev vx0 ingress" 101 1 log_test $? 0 "No forwarding using backup nexthop ID" - tc_check_packets sw2 "dev vx0 ingress" 102 2 + tc_check_packets $sw2 "dev vx0 ingress" 102 2 log_test $? 0 "Forwarding using VXLAN FDB entry" }
@@ -475,109 +468,109 @@ backup_nhid_invalid() # is forwarded out of the VXLAN port, but dropped by the VXLAN driver # and does not crash the host.
- run_cmd "tc -n sw1 qdisc replace dev swp1 clsact" - run_cmd "tc -n sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass" + run_cmd "tc -n $sw1 qdisc replace dev swp1 clsact" + run_cmd "tc -n $sw1 filter replace dev swp1 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac action pass" # Drop all other Tx traffic to avoid changes to Tx drop counter. - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 2 handle 102 proto all matchall action drop" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 2 handle 102 proto all matchall action drop"
- tx_drop=$(ip -n sw1 -s -j link show dev vx0 | jq '.[]["stats64"]["tx"]["dropped"]') + tx_drop=$(ip -n $sw1 -s -j link show dev vx0 | jq '.[]["stats64"]["tx"]["dropped"]')
- run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb" - run_cmd "ip -n sw1 nexthop replace id 2 via 192.0.2.34 fdb" - run_cmd "ip -n sw1 nexthop replace id 10 group 1/2 fdb" + run_cmd "ip -n $sw1 nexthop replace id 1 via 192.0.2.34 fdb" + run_cmd "ip -n $sw1 nexthop replace id 2 via 192.0.2.34 fdb" + run_cmd "ip -n $sw1 nexthop replace id 10 group 1/2 fdb"
- run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10" + run_cmd "bridge -n $sw1 fdb replace $dmac dev swp1 master static vlan 10"
- run_cmd "tc -n sw2 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass" + run_cmd "tc -n $sw2 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw2 filter replace dev vx0 ingress pref 1 handle 101 proto ip flower src_mac $smac dst_mac $dmac enc_key_id 10010 enc_dst_ip 192.0.2.34 action pass"
# First, check that redirection works. - run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_port vx0"" + run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_port vx0"" log_test $? 0 "vx0 configured as backup port of swp1"
- run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_nhid 10"" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 10" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_nhid 10"" log_test $? 0 "Valid nexthop as backup nexthop"
- run_cmd "ip -n sw1 link set dev swp1 carrier off" + run_cmd "ip -n $sw1 link set dev swp1 carrier off" log_test $? 0 "swp1 carrier off"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 0 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 0 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "Forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 1 + tc_check_packets $sw2 "dev vx0 ingress" 101 1 log_test $? 0 "Forwarding using backup nexthop ID" - run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $tx_drop'" + run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $tx_drop'" log_test $? 0 "No Tx drop increase"
# Use a non-existent nexthop ID. - run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 20" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_nhid 20"" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 20" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_nhid 20"" log_test $? 0 "Non-existent nexthop as backup nexthop"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 0 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 0 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "Forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 1 + tc_check_packets $sw2 "dev vx0 ingress" 101 1 log_test $? 0 "No forwarding using backup nexthop ID" - run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $((tx_drop + 1))'" + run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $((tx_drop + 1))'" log_test $? 0 "Tx drop increased"
# Use a blckhole nexthop. - run_cmd "ip -n sw1 nexthop replace id 30 blackhole" - run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 30" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_nhid 30"" + run_cmd "ip -n $sw1 nexthop replace id 30 blackhole" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 30" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_nhid 30"" log_test $? 0 "Blackhole nexthop as backup nexthop"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 0 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 0 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "Forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 1 + tc_check_packets $sw2 "dev vx0 ingress" 101 1 log_test $? 0 "No forwarding using backup nexthop ID" - run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $((tx_drop + 2))'" + run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $((tx_drop + 2))'" log_test $? 0 "Tx drop increased"
# Non-group FDB nexthop. - run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 1" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_nhid 1"" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 1" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_nhid 1"" log_test $? 0 "Non-group FDB nexthop as backup nexthop"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 0 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 0 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 4 + tc_check_packets $sw1 "dev vx0 egress" 101 4 log_test $? 0 "Forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 1 + tc_check_packets $sw2 "dev vx0 ingress" 101 1 log_test $? 0 "No forwarding using backup nexthop ID" - run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $((tx_drop + 3))'" + run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $((tx_drop + 3))'" log_test $? 0 "Tx drop increased"
# IPv6 address family nexthop. - run_cmd "ip -n sw1 nexthop replace id 100 via 2001:db8:100::1 fdb" - run_cmd "ip -n sw1 nexthop replace id 200 via 2001:db8:100::1 fdb" - run_cmd "ip -n sw1 nexthop replace id 300 group 100/200 fdb" - run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 300" - run_cmd "bridge -n sw1 -d link show dev swp1 | grep "backup_nhid 300"" + run_cmd "ip -n $sw1 nexthop replace id 100 via 2001:db8:100::1 fdb" + run_cmd "ip -n $sw1 nexthop replace id 200 via 2001:db8:100::1 fdb" + run_cmd "ip -n $sw1 nexthop replace id 300 group 100/200 fdb" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 300" + run_cmd "bridge -n $sw1 -d link show dev swp1 | grep "backup_nhid 300"" log_test $? 0 "IPv6 address family nexthop as backup nexthop"
- run_cmd "ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" - tc_check_packets sw1 "dev swp1 egress" 101 0 + run_cmd "ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 1" + tc_check_packets $sw1 "dev swp1 egress" 101 0 log_test $? 0 "No forwarding out of swp1" - tc_check_packets sw1 "dev vx0 egress" 101 5 + tc_check_packets $sw1 "dev vx0 egress" 101 5 log_test $? 0 "Forwarding out of vx0" - tc_check_packets sw2 "dev vx0 ingress" 101 1 + tc_check_packets $sw2 "dev vx0 ingress" 101 1 log_test $? 0 "No forwarding using backup nexthop ID" - run_cmd "ip -n sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $((tx_drop + 4))'" + run_cmd "ip -n $sw1 -s -j link show dev vx0 | jq -e '.[]["stats64"]["tx"]["dropped"] == $((tx_drop + 4))'" log_test $? 0 "Tx drop increased" }
@@ -591,44 +584,44 @@ backup_nhid_ping() echo "------------------------"
# Test bidirectional traffic when traffic is redirected in both VTEPs. - sw1_mac=$(ip -n sw1 -j -p link show br0.10 | jq -r '.[]["address"]') - sw2_mac=$(ip -n sw2 -j -p link show br0.10 | jq -r '.[]["address"]') + sw1_mac=$(ip -n $sw1 -j -p link show br0.10 | jq -r '.[]["address"]') + sw2_mac=$(ip -n $sw2 -j -p link show br0.10 | jq -r '.[]["address"]')
- run_cmd "bridge -n sw1 fdb replace $sw2_mac dev swp1 master static vlan 10" - run_cmd "bridge -n sw2 fdb replace $sw1_mac dev swp1 master static vlan 10" + run_cmd "bridge -n $sw1 fdb replace $sw2_mac dev swp1 master static vlan 10" + run_cmd "bridge -n $sw2 fdb replace $sw1_mac dev swp1 master static vlan 10"
- run_cmd "ip -n sw1 neigh replace 192.0.2.66 lladdr $sw2_mac nud perm dev br0.10" - run_cmd "ip -n sw2 neigh replace 192.0.2.65 lladdr $sw1_mac nud perm dev br0.10" + run_cmd "ip -n $sw1 neigh replace 192.0.2.66 lladdr $sw2_mac nud perm dev br0.10" + run_cmd "ip -n $sw2 neigh replace 192.0.2.65 lladdr $sw1_mac nud perm dev br0.10"
- run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb" - run_cmd "ip -n sw2 nexthop replace id 1 via 192.0.2.33 fdb" - run_cmd "ip -n sw1 nexthop replace id 10 group 1 fdb" - run_cmd "ip -n sw2 nexthop replace id 10 group 1 fdb" + run_cmd "ip -n $sw1 nexthop replace id 1 via 192.0.2.34 fdb" + run_cmd "ip -n $sw2 nexthop replace id 1 via 192.0.2.33 fdb" + run_cmd "ip -n $sw1 nexthop replace id 10 group 1 fdb" + run_cmd "ip -n $sw2 nexthop replace id 10 group 1 fdb"
- run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0" - run_cmd "bridge -n sw2 link set dev swp1 backup_port vx0" - run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10" - run_cmd "bridge -n sw2 link set dev swp1 backup_nhid 10" + run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0" + run_cmd "bridge -n $sw2 link set dev swp1 backup_port vx0" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 10" + run_cmd "bridge -n $sw2 link set dev swp1 backup_nhid 10"
- run_cmd "ip -n sw1 link set dev swp1 carrier off" - run_cmd "ip -n sw2 link set dev swp1 carrier off" + run_cmd "ip -n $sw1 link set dev swp1 carrier off" + run_cmd "ip -n $sw2 link set dev swp1 carrier off"
- run_cmd "ip netns exec sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66" + run_cmd "ip netns exec $sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66" log_test $? 0 "Ping with backup nexthop ID"
# Reset the backup nexthop ID to 0 and check that ping fails. - run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 0" - run_cmd "bridge -n sw2 link set dev swp1 backup_nhid 0" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 0" + run_cmd "bridge -n $sw2 link set dev swp1 backup_nhid 0"
- run_cmd "ip netns exec sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66" + run_cmd "ip netns exec $sw1 ping -i 0.1 -c 10 -w $PING_TIMEOUT 192.0.2.66" log_test $? 1 "Ping after disabling backup nexthop ID" }
backup_nhid_add_del_loop() { while true; do - ip -n sw1 nexthop del id 10 - ip -n sw1 nexthop replace id 10 group 1/2 fdb + ip -n $sw1 nexthop del id 10 + ip -n $sw1 nexthop replace id 10 group 1/2 fdb done >/dev/null 2>&1 }
@@ -648,19 +641,19 @@ backup_nhid_torture() # deleting the group. The test is considered successful if nothing # crashed.
- run_cmd "ip -n sw1 nexthop replace id 1 via 192.0.2.34 fdb" - run_cmd "ip -n sw1 nexthop replace id 2 via 192.0.2.34 fdb" - run_cmd "ip -n sw1 nexthop replace id 10 group 1/2 fdb" + run_cmd "ip -n $sw1 nexthop replace id 1 via 192.0.2.34 fdb" + run_cmd "ip -n $sw1 nexthop replace id 2 via 192.0.2.34 fdb" + run_cmd "ip -n $sw1 nexthop replace id 10 group 1/2 fdb"
- run_cmd "bridge -n sw1 fdb replace $dmac dev swp1 master static vlan 10" + run_cmd "bridge -n $sw1 fdb replace $dmac dev swp1 master static vlan 10"
- run_cmd "bridge -n sw1 link set dev swp1 backup_port vx0" - run_cmd "bridge -n sw1 link set dev swp1 backup_nhid 10" - run_cmd "ip -n sw1 link set dev swp1 carrier off" + run_cmd "bridge -n $sw1 link set dev swp1 backup_port vx0" + run_cmd "bridge -n $sw1 link set dev swp1 backup_nhid 10" + run_cmd "ip -n $sw1 link set dev swp1 carrier off"
backup_nhid_add_del_loop & pid1=$! - ip netns exec sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 0 & + ip netns exec $sw1 mausezahn br0.10 -a $smac -b $dmac -A 198.51.100.1 -B 198.51.100.2 -t ip -p 100 -q -c 0 & pid2=$!
sleep 30
On Wed, Dec 06, 2023 at 03:07:53PM +0800, Hangbin Liu wrote:
There is no h1 h2 actually. Remove it. Here is the test result after conversion.
]# ./test_bridge_backup_port.sh
Backup port
TEST: Forwarding out of swp1 [ OK ] TEST: No forwarding out of vx0 [ OK ] TEST: swp1 carrier off [ OK ] TEST: No forwarding out of swp1 [ OK ] ... Backup nexthop ID - ping
TEST: Ping with backup nexthop ID [ OK ] TEST: Ping after disabling backup nexthop ID [ OK ]
Backup nexthop ID - torture test
TEST: Torture test [ OK ]
Tests passed: 83 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com
Reviewed-by: Ido Schimmel idosch@nvidia.com Tested-by: Ido Schimmel idosch@nvidia.com
Here is the test result after conversion.
]# ./test_bridge_neigh_suppress.sh
Per-port ARP suppression - VLAN 10 ---------------------------------- TEST: arping [ OK ] TEST: ARP suppression [ OK ]
...
TEST: NS suppression (VLAN 20) [ OK ]
Tests passed: 148 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../net/test_bridge_neigh_suppress.sh | 331 +++++++++--------- 1 file changed, 162 insertions(+), 169 deletions(-)
diff --git a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh index d80f2cd87614..8533393a4f18 100755 --- a/tools/testing/selftests/net/test_bridge_neigh_suppress.sh +++ b/tools/testing/selftests/net/test_bridge_neigh_suppress.sh @@ -45,9 +45,8 @@ # | sw1 | | sw2 | # +------------------------------------+ +------------------------------------+
+source lib.sh ret=0 -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4
# All tests in this script. Can be overridden with -t option. TESTS=" @@ -140,9 +139,6 @@ setup_topo_ns() { local ns=$1; shift
- ip netns add $ns - ip -n $ns link set dev lo up - ip netns exec $ns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 ip netns exec $ns sysctl -qw net.ipv6.conf.default.ignore_routes_with_linkdown=1 ip netns exec $ns sysctl -qw net.ipv6.conf.all.accept_dad=0 @@ -153,21 +149,22 @@ setup_topo() { local ns
- for ns in h1 h2 sw1 sw2; do + setup_ns h1 h2 sw1 sw2 + for ns in $h1 $h2 $sw1 $sw2; do setup_topo_ns $ns done
ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns h1 name eth0 - ip link set dev veth1 netns sw1 name swp1 + ip link set dev veth0 netns $h1 name eth0 + ip link set dev veth1 netns $sw1 name swp1
ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns sw1 name veth0 - ip link set dev veth1 netns sw2 name veth0 + ip link set dev veth0 netns $sw1 name veth0 + ip link set dev veth1 netns $sw2 name veth0
ip link add name veth0 type veth peer name veth1 - ip link set dev veth0 netns h2 name eth0 - ip link set dev veth1 netns sw2 name swp1 + ip link set dev veth0 netns $h2 name eth0 + ip link set dev veth1 netns $sw2 name swp1 }
setup_host_common() @@ -190,7 +187,7 @@ setup_host_common()
setup_h1() { - local ns=h1 + local ns=$h1 local v4addr1=192.0.2.1/28 local v4addr2=192.0.2.17/28 local v6addr1=2001:db8:1::1/64 @@ -201,7 +198,7 @@ setup_h1()
setup_h2() { - local ns=h2 + local ns=$h2 local v4addr1=192.0.2.2/28 local v4addr2=192.0.2.18/28 local v6addr1=2001:db8:1::2/64 @@ -254,7 +251,7 @@ setup_sw_common()
setup_sw1() { - local ns=sw1 + local ns=$sw1 local local_addr=192.0.2.33 local remote_addr=192.0.2.34 local veth_addr=192.0.2.49 @@ -265,7 +262,7 @@ setup_sw1()
setup_sw2() { - local ns=sw2 + local ns=$sw2 local local_addr=192.0.2.34 local remote_addr=192.0.2.33 local veth_addr=192.0.2.50 @@ -291,11 +288,7 @@ setup()
cleanup() { - local ns - - for ns in h1 h2 sw1 sw2; do - ip netns del $ns &> /dev/null - done + cleanup_ns $h1 $h2 $sw1 $sw2 }
################################################################################ @@ -312,80 +305,80 @@ neigh_suppress_arp_common() echo "Per-port ARP suppression - VLAN $vid" echo "----------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip arp_sip $sip arp_op request action pass"
# Initial state - check that ARP requests are not suppressed and that # ARP replies are received. - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression"
# Enable neighbor suppression and check that nothing changes compared # to the initial state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "ARP suppression"
# Install an FDB entry for the remote host and check that nothing # changes compared to the initial state. - h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" + h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" log_test $? 0 "FDB entry installation"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "ARP suppression"
# Install a neighbor on the matching SVI interface and check that ARP # requests are suppressed. - run_cmd "ip -n sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid" + run_cmd "ip -n $sw1 neigh replace $tip lladdr $h2_mac nud permanent dev br0.$vid" log_test $? 0 "Neighbor entry installation"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "ARP suppression"
# Take the second host down and check that ARP requests are suppressed # and that ARP replies are received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "ARP suppression"
- run_cmd "ip -n h2 link set dev eth0.$vid up" + run_cmd "ip -n $h2 link set dev eth0.$vid up" log_test $? 0 "H2 up"
# Disable neighbor suppression and check that ARP requests are no # longer suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 0 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 4 + tc_check_packets $sw1 "dev vx0 egress" 101 4 log_test $? 0 "ARP suppression"
# Take the second host down and check that ARP requests are not # suppressed and that ARP replies are not received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip -I eth0.$vid $tip" log_test $? 1 "arping" - tc_check_packets sw1 "dev vx0 egress" 101 5 + tc_check_packets $sw1 "dev vx0 egress" 101 5 log_test $? 0 "ARP suppression" }
@@ -415,80 +408,80 @@ neigh_suppress_ns_common() echo "Per-port NS suppression - VLAN $vid" echo "---------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr type 135 code 0 action pass"
# Initial state - check that NS messages are not suppressed and that ND # messages are received. - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression"
# Enable neighbor suppression and check that nothing changes compared # to the initial state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "NS suppression"
# Install an FDB entry for the remote host and check that nothing # changes compared to the initial state. - h2_mac=$(ip -n h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" + h2_mac=$(ip -n $h2 -j -p link show eth0.$vid | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac dev vx0 master static vlan $vid" log_test $? 0 "FDB entry installation"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "NS suppression"
# Install a neighbor on the matching SVI interface and check that NS # messages are suppressed. - run_cmd "ip -n sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid" + run_cmd "ip -n $sw1 neigh replace $daddr lladdr $h2_mac nud permanent dev br0.$vid" log_test $? 0 "Neighbor entry installation"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "NS suppression"
# Take the second host down and check that NS messages are suppressed # and that ND messages are received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 3 + tc_check_packets $sw1 "dev vx0 egress" 101 3 log_test $? 0 "NS suppression"
- run_cmd "ip -n h2 link set dev eth0.$vid up" + run_cmd "ip -n $h2 link set dev eth0.$vid up" log_test $? 0 "H2 up"
# Disable neighbor suppression and check that NS messages are no longer # suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 0 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 4 + tc_check_packets $sw1 "dev vx0 egress" 101 4 log_test $? 0 "NS suppression"
# Take the second host down and check that NS messages are not # suppressed and that ND messages are not received. - run_cmd "ip -n h2 link set dev eth0.$vid down" + run_cmd "ip -n $h2 link set dev eth0.$vid down" log_test $? 0 "H2 down"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr -w 5000 $daddr eth0.$vid" log_test $? 2 "ndisc6" - tc_check_packets sw1 "dev vx0 egress" 101 5 + tc_check_packets $sw1 "dev vx0 egress" 101 5 log_test $? 0 "NS suppression" }
@@ -524,118 +517,118 @@ neigh_vlan_suppress_arp() echo "Per-{Port, VLAN} ARP suppression" echo "--------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto 0x0806 flower indev swp1 arp_tip $tip1 arp_sip $sip1 arp_op request action pass" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto 0x0806 flower indev swp1 arp_tip $tip2 arp_sip $sip2 arp_op request action pass"
- h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') - h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" - run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" - run_cmd "ip -n sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1" - run_cmd "ip -n sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2" + h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') + h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" + run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" + run_cmd "ip -n $sw1 neigh replace $tip1 lladdr $h2_mac1 nud permanent dev br0.$vid1" + run_cmd "ip -n $sw1 neigh replace $tip2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
# Enable per-{Port, VLAN} neighbor suppression and check that ARP # requests are not suppressed and that ARP replies are received. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_vlan_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_vlan_suppress on"" log_test $? 0 ""neigh_vlan_suppress" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 1 + tc_check_packets $sw1 "dev vx0 egress" 102 1 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Enable neighbor suppression on VLAN 10 and check that only on this # VLAN ARP requests are suppressed. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on (VLAN $vid1)" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off (VLAN $vid2)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 2 + tc_check_packets $sw1 "dev vx0 egress" 102 2 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Enable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 3 + tc_check_packets $sw1 "dev vx0 egress" 102 3 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 4 + tc_check_packets $sw1 "dev vx0 egress" 102 4 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable neighbor suppression on VLAN 10 and check that ARP requests # are no longer suppressed on this VLAN. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off (VLAN $vid1)"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "ARP suppression (VLAN $vid2)"
# Disable per-{Port, VLAN} neighbor suppression, enable neighbor # suppression on the port and check that on both VLANs ARP requests are # suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_vlan_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_vlan_suppress off"" log_test $? 0 ""neigh_vlan_suppress" is off"
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip1 -I eth0.$vid1 $tip1" log_test $? 0 "arping (VLAN $vid1)" - run_cmd "ip netns exec h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" + run_cmd "ip netns exec $h1 arping -q -b -c 1 -w 5 -s $sip2 -I eth0.$vid2 $tip2" log_test $? 0 "arping (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "ARP suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "ARP suppression (VLAN $vid2)" }
@@ -655,118 +648,118 @@ neigh_vlan_suppress_ns() echo "Per-{Port, VLAN} NS suppression" echo "-------------------------------"
- run_cmd "tc -n sw1 qdisc replace dev vx0 clsact" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass" - run_cmd "tc -n sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass" + run_cmd "tc -n $sw1 qdisc replace dev vx0 clsact" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 101 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr1 type 135 code 0 action pass" + run_cmd "tc -n $sw1 filter replace dev vx0 egress pref 1 handle 102 proto ipv6 flower indev swp1 ip_proto icmpv6 dst_ip $maddr src_ip $saddr2 type 135 code 0 action pass"
- h2_mac1=$(ip -n h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') - h2_mac2=$(ip -n h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') - run_cmd "bridge -n sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" - run_cmd "bridge -n sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" - run_cmd "ip -n sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1" - run_cmd "ip -n sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2" + h2_mac1=$(ip -n $h2 -j -p link show eth0.$vid1 | jq -r '.[]["address"]') + h2_mac2=$(ip -n $h2 -j -p link show eth0.$vid2 | jq -r '.[]["address"]') + run_cmd "bridge -n $sw1 fdb replace $h2_mac1 dev vx0 master static vlan $vid1" + run_cmd "bridge -n $sw1 fdb replace $h2_mac2 dev vx0 master static vlan $vid2" + run_cmd "ip -n $sw1 neigh replace $daddr1 lladdr $h2_mac1 nud permanent dev br0.$vid1" + run_cmd "ip -n $sw1 neigh replace $daddr2 lladdr $h2_mac2 nud permanent dev br0.$vid2"
# Enable per-{Port, VLAN} neighbor suppression and check that NS # messages are not suppressed and that ND messages are received. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_vlan_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_vlan_suppress on"" log_test $? 0 ""neigh_vlan_suppress" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 1 + tc_check_packets $sw1 "dev vx0 egress" 102 1 log_test $? 0 "NS suppression (VLAN $vid2)"
# Enable neighbor suppression on VLAN 10 and check that only on this # VLAN NS messages are suppressed. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on (VLAN $vid1)" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid2 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid2 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off (VLAN $vid2)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 2 + tc_check_packets $sw1 "dev vx0 egress" 102 2 log_test $? 0 "NS suppression (VLAN $vid2)"
# Enable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 3 + tc_check_packets $sw1 "dev vx0 egress" 102 3 log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable neighbor suppression on the port and check that it has no # effect compared to previous state. - run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 1 + tc_check_packets $sw1 "dev vx0 egress" 101 1 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 4 + tc_check_packets $sw1 "dev vx0 egress" 102 4 log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable neighbor suppression on VLAN 10 and check that NS messages # are no longer suppressed on this VLAN. - run_cmd "bridge -n sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" - run_cmd "bridge -n sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress off"" + run_cmd "bridge -n $sw1 vlan set vid $vid1 dev vx0 neigh_suppress off" + run_cmd "bridge -n $sw1 -d vlan show dev vx0 vid $vid1 | grep "neigh_suppress off"" log_test $? 0 ""neigh_suppress" is off (VLAN $vid1)"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "NS suppression (VLAN $vid2)"
# Disable per-{Port, VLAN} neighbor suppression, enable neighbor # suppression on the port and check that on both VLANs NS messages are # suppressed. - run_cmd "bridge -n sw1 link set dev vx0 neigh_vlan_suppress off" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_vlan_suppress off"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_vlan_suppress off" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_vlan_suppress off"" log_test $? 0 ""neigh_vlan_suppress" is off"
- run_cmd "bridge -n sw1 link set dev vx0 neigh_suppress on" - run_cmd "bridge -n sw1 -d link show dev vx0 | grep "neigh_suppress on"" + run_cmd "bridge -n $sw1 link set dev vx0 neigh_suppress on" + run_cmd "bridge -n $sw1 -d link show dev vx0 | grep "neigh_suppress on"" log_test $? 0 ""neigh_suppress" is on"
- run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr1 -w 5000 $daddr1 eth0.$vid1" log_test $? 0 "ndisc6 (VLAN $vid1)" - run_cmd "ip netns exec h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" + run_cmd "ip netns exec $h1 ndisc6 -q -r 1 -s $saddr2 -w 5000 $daddr2 eth0.$vid2" log_test $? 0 "ndisc6 (VLAN $vid2)"
- tc_check_packets sw1 "dev vx0 egress" 101 2 + tc_check_packets $sw1 "dev vx0 egress" 101 2 log_test $? 0 "NS suppression (VLAN $vid1)" - tc_check_packets sw1 "dev vx0 egress" 102 5 + tc_check_packets $sw1 "dev vx0 egress" 102 5 log_test $? 0 "NS suppression (VLAN $vid2)" }
On Wed, Dec 06, 2023 at 03:07:54PM +0800, Hangbin Liu wrote:
Here is the test result after conversion.
]# ./test_bridge_neigh_suppress.sh
Per-port ARP suppression - VLAN 10
TEST: arping [ OK ] TEST: ARP suppression [ OK ]
...
TEST: NS suppression (VLAN 20) [ OK ]
Tests passed: 148 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com
Reviewed-by: Ido Schimmel idosch@nvidia.com Tested-by: Ido Schimmel idosch@nvidia.com
Here is the test result after conversion.
]# ./test_vxlan_mdb.sh
Control path: Basic (*, G) operations - IPv4 overlay / IPv4 underlay -------------------------------------------------------------------- TEST: MDB entry addition [ OK ]
...
Data path: MDB torture test - IPv6 overlay / IPv6 underlay ---------------------------------------------------------- TEST: Torture test [ OK ]
Tests passed: 620 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- tools/testing/selftests/net/test_vxlan_mdb.sh | 202 +++++++++--------- 1 file changed, 99 insertions(+), 103 deletions(-)
diff --git a/tools/testing/selftests/net/test_vxlan_mdb.sh b/tools/testing/selftests/net/test_vxlan_mdb.sh index 6e996f8063cd..6725fd9157b9 100755 --- a/tools/testing/selftests/net/test_vxlan_mdb.sh +++ b/tools/testing/selftests/net/test_vxlan_mdb.sh @@ -55,9 +55,8 @@ # | ns2_v4 | | ns2_v6 | # +------------------------------------+ +------------------------------------+
+source lib.sh ret=0 -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4
CONTROL_PATH_TESTS=" basic_star_g_ipv4_ipv4 @@ -260,9 +259,6 @@ setup_common() local local_addr1=$1; shift local local_addr2=$1; shift
- ip netns add $ns1 - ip netns add $ns2 - ip link add name veth0 type veth peer name veth1 ip link set dev veth0 netns $ns1 name veth0 ip link set dev veth1 netns $ns2 name veth0 @@ -273,36 +269,36 @@ setup_common()
setup_v4() { - setup_common ns1_v4 ns2_v4 192.0.2.1 192.0.2.2 + setup_ns ns1_v4 ns2_v4 + setup_common $ns1_v4 $ns2_v4 192.0.2.1 192.0.2.2
- ip -n ns1_v4 address add 192.0.2.17/28 dev veth0 - ip -n ns2_v4 address add 192.0.2.18/28 dev veth0 + ip -n $ns1_v4 address add 192.0.2.17/28 dev veth0 + ip -n $ns2_v4 address add 192.0.2.18/28 dev veth0
- ip -n ns1_v4 route add default via 192.0.2.18 - ip -n ns2_v4 route add default via 192.0.2.17 + ip -n $ns1_v4 route add default via 192.0.2.18 + ip -n $ns2_v4 route add default via 192.0.2.17 }
cleanup_v4() { - ip netns del ns2_v4 - ip netns del ns1_v4 + cleanup_ns $ns2_v4 $ns1_v4 }
setup_v6() { - setup_common ns1_v6 ns2_v6 2001:db8:1::1 2001:db8:1::2 + setup_ns ns1_v6 ns2_v6 + setup_common $ns1_v6 $ns2_v6 2001:db8:1::1 2001:db8:1::2
- ip -n ns1_v6 address add 2001:db8:2::1/64 dev veth0 nodad - ip -n ns2_v6 address add 2001:db8:2::2/64 dev veth0 nodad + ip -n $ns1_v6 address add 2001:db8:2::1/64 dev veth0 nodad + ip -n $ns2_v6 address add 2001:db8:2::2/64 dev veth0 nodad
- ip -n ns1_v6 route add default via 2001:db8:2::2 - ip -n ns2_v6 route add default via 2001:db8:2::1 + ip -n $ns1_v6 route add default via 2001:db8:2::2 + ip -n $ns2_v6 route add default via 2001:db8:2::1 }
cleanup_v6() { - ip netns del ns2_v6 - ip netns del ns1_v6 + cleanup_ns $ns2_v6 $ns1_v6 }
setup() @@ -433,7 +429,7 @@ basic_common()
basic_star_g_ipv4_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local grp_key="grp 239.1.1.1" local vtep_ip=198.51.100.100
@@ -446,7 +442,7 @@ basic_star_g_ipv4_ipv4()
basic_star_g_ipv6_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local grp_key="grp ff0e::1" local vtep_ip=198.51.100.100
@@ -459,7 +455,7 @@ basic_star_g_ipv6_ipv4()
basic_star_g_ipv4_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local grp_key="grp 239.1.1.1" local vtep_ip=2001:db8:1000::1
@@ -472,7 +468,7 @@ basic_star_g_ipv4_ipv6()
basic_star_g_ipv6_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local grp_key="grp ff0e::1" local vtep_ip=2001:db8:1000::1
@@ -485,7 +481,7 @@ basic_star_g_ipv6_ipv6()
basic_sg_ipv4_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local grp_key="grp 239.1.1.1 src 192.0.2.129" local vtep_ip=198.51.100.100
@@ -498,7 +494,7 @@ basic_sg_ipv4_ipv4()
basic_sg_ipv6_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local grp_key="grp ff0e::1 src 2001:db8:100::1" local vtep_ip=198.51.100.100
@@ -511,7 +507,7 @@ basic_sg_ipv6_ipv4()
basic_sg_ipv4_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local grp_key="grp 239.1.1.1 src 192.0.2.129" local vtep_ip=2001:db8:1000::1
@@ -524,7 +520,7 @@ basic_sg_ipv4_ipv6()
basic_sg_ipv6_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local grp_key="grp ff0e::1 src 2001:db8:100::1" local vtep_ip=2001:db8:1000::1
@@ -694,7 +690,7 @@ star_g_common()
star_g_ipv4_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local grp=239.1.1.1 local src1=192.0.2.129 local src2=192.0.2.130 @@ -711,7 +707,7 @@ star_g_ipv4_ipv4()
star_g_ipv6_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local grp=ff0e::1 local src1=2001:db8:100::1 local src2=2001:db8:100::2 @@ -728,7 +724,7 @@ star_g_ipv6_ipv4()
star_g_ipv4_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local grp=239.1.1.1 local src1=192.0.2.129 local src2=192.0.2.130 @@ -745,7 +741,7 @@ star_g_ipv4_ipv6()
star_g_ipv6_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local grp=ff0e::1 local src1=2001:db8:100::1 local src2=2001:db8:100::2 @@ -793,7 +789,7 @@ sg_common()
sg_ipv4_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local grp=239.1.1.1 local src=192.0.2.129 local vtep_ip=198.51.100.100 @@ -808,7 +804,7 @@ sg_ipv4_ipv4()
sg_ipv6_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local grp=ff0e::1 local src=2001:db8:100::1 local vtep_ip=198.51.100.100 @@ -823,7 +819,7 @@ sg_ipv6_ipv4()
sg_ipv4_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local grp=239.1.1.1 local src=192.0.2.129 local vtep_ip=2001:db8:1000::1 @@ -838,7 +834,7 @@ sg_ipv4_ipv6()
sg_ipv6_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local grp=ff0e::1 local src=2001:db8:100::1 local vtep_ip=2001:db8:1000::1 @@ -918,7 +914,7 @@ dump_common()
dump_ipv4_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local local_addr=192.0.2.1 local remote_prefix=198.51.100. local fn=ipv4_grps_get @@ -932,7 +928,7 @@ dump_ipv4_ipv4()
dump_ipv6_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local local_addr=192.0.2.1 local remote_prefix=198.51.100. local fn=ipv6_grps_get @@ -946,7 +942,7 @@ dump_ipv6_ipv4()
dump_ipv4_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local local_addr=2001:db8:1::1 local remote_prefix=2001:db8:1000:: local fn=ipv4_grps_get @@ -960,7 +956,7 @@ dump_ipv4_ipv6()
dump_ipv6_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local local_addr=2001:db8:1::1 local remote_prefix=2001:db8:1000:: local fn=ipv6_grps_get @@ -1072,8 +1068,8 @@ encap_params_common()
encap_params_ipv4_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local plen=32 @@ -1091,8 +1087,8 @@ encap_params_ipv4_ipv4()
encap_params_ipv6_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local plen=32 @@ -1110,8 +1106,8 @@ encap_params_ipv6_ipv4()
encap_params_ipv4_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local plen=128 @@ -1129,8 +1125,8 @@ encap_params_ipv4_ipv6()
encap_params_ipv6_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local plen=128 @@ -1208,8 +1204,8 @@ starg_exclude_ir_common()
starg_exclude_ir_ipv4_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local plen=32 @@ -1227,8 +1223,8 @@ starg_exclude_ir_ipv4_ipv4()
starg_exclude_ir_ipv6_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local plen=32 @@ -1246,8 +1242,8 @@ starg_exclude_ir_ipv6_ipv4()
starg_exclude_ir_ipv4_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local plen=128 @@ -1265,8 +1261,8 @@ starg_exclude_ir_ipv4_ipv6()
starg_exclude_ir_ipv6_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local plen=128 @@ -1344,8 +1340,8 @@ starg_include_ir_common()
starg_include_ir_ipv4_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local plen=32 @@ -1363,8 +1359,8 @@ starg_include_ir_ipv4_ipv4()
starg_include_ir_ipv6_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local plen=32 @@ -1382,8 +1378,8 @@ starg_include_ir_ipv6_ipv4()
starg_include_ir_ipv4_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local plen=128 @@ -1401,8 +1397,8 @@ starg_include_ir_ipv4_ipv6()
starg_include_ir_ipv6_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local plen=128 @@ -1462,8 +1458,8 @@ starg_exclude_p2mp_common()
starg_exclude_p2mp_ipv4_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local mcast_grp=238.1.1.1 local plen=32 local grp=239.1.1.1 @@ -1480,8 +1476,8 @@ starg_exclude_p2mp_ipv4_ipv4()
starg_exclude_p2mp_ipv6_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local mcast_grp=238.1.1.1 local plen=32 local grp=ff0e::1 @@ -1498,8 +1494,8 @@ starg_exclude_p2mp_ipv6_ipv4()
starg_exclude_p2mp_ipv4_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local mcast_grp=ff0e::2 local plen=128 local grp=239.1.1.1 @@ -1516,8 +1512,8 @@ starg_exclude_p2mp_ipv4_ipv6()
starg_exclude_p2mp_ipv6_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local mcast_grp=ff0e::2 local plen=128 local grp=ff0e::1 @@ -1576,8 +1572,8 @@ starg_include_p2mp_common()
starg_include_p2mp_ipv4_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local mcast_grp=238.1.1.1 local plen=32 local grp=239.1.1.1 @@ -1594,8 +1590,8 @@ starg_include_p2mp_ipv4_ipv4()
starg_include_p2mp_ipv6_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local mcast_grp=238.1.1.1 local plen=32 local grp=ff0e::1 @@ -1612,8 +1608,8 @@ starg_include_p2mp_ipv6_ipv4()
starg_include_p2mp_ipv4_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local mcast_grp=ff0e::2 local plen=128 local grp=239.1.1.1 @@ -1630,8 +1626,8 @@ starg_include_p2mp_ipv4_ipv6()
starg_include_p2mp_ipv6_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local mcast_grp=ff0e::2 local plen=128 local grp=ff0e::1 @@ -1709,8 +1705,8 @@ egress_vni_translation_common()
egress_vni_translation_ipv4_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local mcast_grp=238.1.1.1 local plen=32 local proto="ipv4" @@ -1727,8 +1723,8 @@ egress_vni_translation_ipv4_ipv4()
egress_vni_translation_ipv6_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local mcast_grp=238.1.1.1 local plen=32 local proto="ipv6" @@ -1745,8 +1741,8 @@ egress_vni_translation_ipv6_ipv4()
egress_vni_translation_ipv4_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local mcast_grp=ff0e::2 local plen=128 local proto="ipv4" @@ -1763,8 +1759,8 @@ egress_vni_translation_ipv4_ipv6()
egress_vni_translation_ipv6_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local mcast_grp=ff0e::2 local plen=128 local proto="ipv6" @@ -1929,8 +1925,8 @@ all_zeros_mdb_common()
all_zeros_mdb_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local vtep1_ip=198.51.100.101 local vtep2_ip=198.51.100.102 local vtep3_ip=198.51.100.103 @@ -1947,8 +1943,8 @@ all_zeros_mdb_ipv4()
all_zeros_mdb_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local vtep3_ip=2001:db8:3000::1 @@ -2021,8 +2017,8 @@ mdb_fdb_common()
mdb_fdb_ipv4_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local plen=32 @@ -2040,8 +2036,8 @@ mdb_fdb_ipv4_ipv4()
mdb_fdb_ipv6_ipv4() { - local ns1=ns1_v4 - local ns2=ns2_v4 + local ns1=$ns1_v4 + local ns2=$ns2_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local plen=32 @@ -2059,8 +2055,8 @@ mdb_fdb_ipv6_ipv4()
mdb_fdb_ipv4_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local plen=128 @@ -2078,8 +2074,8 @@ mdb_fdb_ipv4_ipv6()
mdb_fdb_ipv6_ipv6() { - local ns1=ns1_v6 - local ns2=ns2_v6 + local ns1=$ns1_v6 + local ns2=$ns2_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local plen=128 @@ -2166,7 +2162,7 @@ mdb_torture_common()
mdb_torture_ipv4_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local grp1=239.1.1.1 @@ -2183,7 +2179,7 @@ mdb_torture_ipv4_ipv4()
mdb_torture_ipv6_ipv4() { - local ns1=ns1_v4 + local ns1=$ns1_v4 local vtep1_ip=198.51.100.100 local vtep2_ip=198.51.100.200 local grp1=ff0e::1 @@ -2200,7 +2196,7 @@ mdb_torture_ipv6_ipv4()
mdb_torture_ipv4_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local grp1=239.1.1.1 @@ -2217,7 +2213,7 @@ mdb_torture_ipv4_ipv6()
mdb_torture_ipv6_ipv6() { - local ns1=ns1_v6 + local ns1=$ns1_v6 local vtep1_ip=2001:db8:1000::1 local vtep2_ip=2001:db8:2000::1 local grp1=ff0e::1
On Wed, Dec 06, 2023 at 03:07:55PM +0800, Hangbin Liu wrote:
Here is the test result after conversion.
]# ./test_vxlan_mdb.sh
Control path: Basic (*, G) operations - IPv4 overlay / IPv4 underlay
TEST: MDB entry addition [ OK ]
...
Data path: MDB torture test - IPv6 overlay / IPv6 underlay
TEST: Torture test [ OK ]
Tests passed: 620 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com
Reviewed-by: Ido Schimmel idosch@nvidia.com Tested-by: Ido Schimmel idosch@nvidia.com
Here is the test result after conversion.
]# ./test_vxlan_nolocalbypass.sh TEST: localbypass enabled [ OK ] TEST: Packet received by local VXLAN device - localbypass [ OK ] TEST: localbypass disabled [ OK ] TEST: Packet not received by local VXLAN device - nolocalbypass [ OK ] TEST: localbypass enabled [ OK ] TEST: Packet received by local VXLAN device - localbypass [ OK ]
Tests passed: 6 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../selftests/net/test_vxlan_nolocalbypass.sh | 48 +++++++++---------- 1 file changed, 23 insertions(+), 25 deletions(-)
diff --git a/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh index f75212bf142c..b8805983b728 100755 --- a/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh +++ b/tools/testing/selftests/net/test_vxlan_nolocalbypass.sh @@ -9,9 +9,8 @@ # option and verifies that packets are no longer received by the second VXLAN # device.
+source lib.sh ret=0 -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4
TESTS=" nolocalbypass @@ -98,20 +97,19 @@ tc_check_packets()
setup() { - ip netns add ns1 + setup_ns ns1
- ip -n ns1 link set dev lo up - ip -n ns1 address add 192.0.2.1/32 dev lo - ip -n ns1 address add 198.51.100.1/32 dev lo + ip -n $ns1 address add 192.0.2.1/32 dev lo + ip -n $ns1 address add 198.51.100.1/32 dev lo
- ip -n ns1 link add name vx0 up type vxlan id 100 local 198.51.100.1 \ + ip -n $ns1 link add name vx0 up type vxlan id 100 local 198.51.100.1 \ dstport 4789 nolearning - ip -n ns1 link add name vx1 up type vxlan id 100 dstport 4790 + ip -n $ns1 link add name vx1 up type vxlan id 100 dstport 4790 }
cleanup() { - ip netns del ns1 &> /dev/null + cleanup_ns $ns1 }
################################################################################ @@ -122,40 +120,40 @@ nolocalbypass() local smac=00:01:02:03:04:05 local dmac=00:0a:0b:0c:0d:0e
- run_cmd "bridge -n ns1 fdb add $dmac dev vx0 self static dst 192.0.2.1 port 4790" + run_cmd "bridge -n $ns1 fdb add $dmac dev vx0 self static dst 192.0.2.1 port 4790"
- run_cmd "tc -n ns1 qdisc add dev vx1 clsact" - run_cmd "tc -n ns1 filter add dev vx1 ingress pref 1 handle 101 proto all flower src_mac $smac dst_mac $dmac action pass" + run_cmd "tc -n $ns1 qdisc add dev vx1 clsact" + run_cmd "tc -n $ns1 filter add dev vx1 ingress pref 1 handle 101 proto all flower src_mac $smac dst_mac $dmac action pass"
- run_cmd "tc -n ns1 qdisc add dev lo clsact" - run_cmd "tc -n ns1 filter add dev lo ingress pref 1 handle 101 proto ip flower ip_proto udp dst_port 4790 action drop" + run_cmd "tc -n $ns1 qdisc add dev lo clsact" + run_cmd "tc -n $ns1 filter add dev lo ingress pref 1 handle 101 proto ip flower ip_proto udp dst_port 4790 action drop"
- run_cmd "ip -n ns1 -d -j link show dev vx0 | jq -e '.[]["linkinfo"]["info_data"]["localbypass"] == true'" + run_cmd "ip -n $ns1 -d -j link show dev vx0 | jq -e '.[]["linkinfo"]["info_data"]["localbypass"] == true'" log_test $? 0 "localbypass enabled"
- run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" + run_cmd "ip netns exec $ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q"
- tc_check_packets "ns1" "dev vx1 ingress" 101 1 + tc_check_packets "$ns1" "dev vx1 ingress" 101 1 log_test $? 0 "Packet received by local VXLAN device - localbypass"
- run_cmd "ip -n ns1 link set dev vx0 type vxlan nolocalbypass" + run_cmd "ip -n $ns1 link set dev vx0 type vxlan nolocalbypass"
- run_cmd "ip -n ns1 -d -j link show dev vx0 | jq -e '.[]["linkinfo"]["info_data"]["localbypass"] == false'" + run_cmd "ip -n $ns1 -d -j link show dev vx0 | jq -e '.[]["linkinfo"]["info_data"]["localbypass"] == false'" log_test $? 0 "localbypass disabled"
- run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" + run_cmd "ip netns exec $ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q"
- tc_check_packets "ns1" "dev vx1 ingress" 101 1 + tc_check_packets "$ns1" "dev vx1 ingress" 101 1 log_test $? 0 "Packet not received by local VXLAN device - nolocalbypass"
- run_cmd "ip -n ns1 link set dev vx0 type vxlan localbypass" + run_cmd "ip -n $ns1 link set dev vx0 type vxlan localbypass"
- run_cmd "ip -n ns1 -d -j link show dev vx0 | jq -e '.[]["linkinfo"]["info_data"]["localbypass"] == true'" + run_cmd "ip -n $ns1 -d -j link show dev vx0 | jq -e '.[]["linkinfo"]["info_data"]["localbypass"] == true'" log_test $? 0 "localbypass enabled"
- run_cmd "ip netns exec ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q" + run_cmd "ip netns exec $ns1 mausezahn vx0 -a $smac -b $dmac -c 1 -p 100 -q"
- tc_check_packets "ns1" "dev vx1 ingress" 101 2 + tc_check_packets "$ns1" "dev vx1 ingress" 101 2 log_test $? 0 "Packet received by local VXLAN device - localbypass" }
On Wed, Dec 06, 2023 at 03:07:56PM +0800, Hangbin Liu wrote:
Here is the test result after conversion.
]# ./test_vxlan_nolocalbypass.sh TEST: localbypass enabled [ OK ] TEST: Packet received by local VXLAN device - localbypass [ OK ] TEST: localbypass disabled [ OK ] TEST: Packet not received by local VXLAN device - nolocalbypass [ OK ] TEST: localbypass enabled [ OK ] TEST: Packet received by local VXLAN device - localbypass [ OK ]
Tests passed: 6 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com
Reviewed-by: Ido Schimmel idosch@nvidia.com Tested-by: Ido Schimmel idosch@nvidia.com
Here is the test result after conversion.
]# ./test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ] Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../selftests/net/test_vxlan_under_vrf.sh | 70 ++++++++++--------- 1 file changed, 36 insertions(+), 34 deletions(-)
diff --git a/tools/testing/selftests/net/test_vxlan_under_vrf.sh b/tools/testing/selftests/net/test_vxlan_under_vrf.sh index 1fd1250ebc66..ae8fbe3f0779 100755 --- a/tools/testing/selftests/net/test_vxlan_under_vrf.sh +++ b/tools/testing/selftests/net/test_vxlan_under_vrf.sh @@ -43,15 +43,14 @@ # This tests both the connectivity between vm-1 and vm-2, and that the underlay # can be moved in and out of the vrf by unsetting and setting veth0's master.
+source lib.sh set -e
cleanup() { ip link del veth-hv-1 2>/dev/null || true ip link del veth-tap 2>/dev/null || true
- for ns in hv-1 hv-2 vm-1 vm-2; do - ip netns del $ns 2>/dev/null || true - done + cleanup_ns $hv_1 $hv_2 $vm_1 $vm_2 }
# Clean start @@ -60,72 +59,75 @@ cleanup &> /dev/null [[ $1 == "clean" ]] && exit 0
trap cleanup EXIT +setup_ns hv_1 hv_2 vm_1 vm_2 +hv[1]=$hv_1 +hv[2]=$hv_2 +vm[1]=$vm_1 +vm[2]=$vm_2
# Setup "Hypervisors" simulated with netns ip link add veth-hv-1 type veth peer name veth-hv-2 setup-hv-networking() { - hv=$1 + id=$1
- ip netns add hv-$hv - ip link set veth-hv-$hv netns hv-$hv - ip -netns hv-$hv link set veth-hv-$hv name veth0 + ip link set veth-hv-$id netns ${hv[$id]} + ip -netns ${hv[$id]} link set veth-hv-$id name veth0
- ip -netns hv-$hv link add vrf-underlay type vrf table 1 - ip -netns hv-$hv link set vrf-underlay up - ip -netns hv-$hv addr add 172.16.0.$hv/24 dev veth0 - ip -netns hv-$hv link set veth0 up + ip -netns ${hv[$id]} link add vrf-underlay type vrf table 1 + ip -netns ${hv[$id]} link set vrf-underlay up + ip -netns ${hv[$id]} addr add 172.16.0.$id/24 dev veth0 + ip -netns ${hv[$id]} link set veth0 up
- ip -netns hv-$hv link add br0 type bridge - ip -netns hv-$hv link set br0 up + ip -netns ${hv[$id]} link add br0 type bridge + ip -netns ${hv[$id]} link set br0 up
- ip -netns hv-$hv link add vxlan0 type vxlan id 10 local 172.16.0.$hv dev veth0 dstport 4789 - ip -netns hv-$hv link set vxlan0 master br0 - ip -netns hv-$hv link set vxlan0 up + ip -netns ${hv[$id]} link add vxlan0 type vxlan id 10 local 172.16.0.$id dev veth0 dstport 4789 + ip -netns ${hv[$id]} link set vxlan0 master br0 + ip -netns ${hv[$id]} link set vxlan0 up } setup-hv-networking 1 setup-hv-networking 2
# Check connectivity between HVs by pinging hv-2 from hv-1 echo -n "Checking HV connectivity " -ip netns exec hv-1 ping -c 1 -W 1 172.16.0.2 &> /dev/null || (echo "[FAIL]"; false) +ip netns exec $hv_1 ping -c 1 -W 1 172.16.0.2 &> /dev/null || (echo "[FAIL]"; false) echo "[ OK ]"
# Setups a "VM" simulated by a netns an a veth pair setup-vm() { id=$1
- ip netns add vm-$id ip link add veth-tap type veth peer name veth-hv
- ip link set veth-tap netns hv-$id - ip -netns hv-$id link set veth-tap master br0 - ip -netns hv-$id link set veth-tap up + ip link set veth-tap netns ${hv[$id]} + ip -netns ${hv[$id]} link set veth-tap master br0 + ip -netns ${hv[$id]} link set veth-tap up
ip link set veth-hv address 02:1d:8d:dd:0c:6$id
- ip link set veth-hv netns vm-$id - ip -netns vm-$id addr add 10.0.0.$id/24 dev veth-hv - ip -netns vm-$id link set veth-hv up + ip link set veth-hv netns ${vm[$id]} + ip -netns ${vm[$id]} addr add 10.0.0.$id/24 dev veth-hv + ip -netns ${vm[$id]} link set veth-hv up } setup-vm 1 setup-vm 2
# Setup VTEP routes to make ARP work -bridge -netns hv-1 fdb add 00:00:00:00:00:00 dev vxlan0 dst 172.16.0.2 self permanent -bridge -netns hv-2 fdb add 00:00:00:00:00:00 dev vxlan0 dst 172.16.0.1 self permanent +bridge -netns $hv_1 fdb add 00:00:00:00:00:00 dev vxlan0 dst 172.16.0.2 self permanent +bridge -netns $hv_2 fdb add 00:00:00:00:00:00 dev vxlan0 dst 172.16.0.1 self permanent
echo -n "Check VM connectivity through VXLAN (underlay in the default VRF) " -ip netns exec vm-1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false) +ip netns exec $vm_1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false) echo "[ OK ]"
# Move the underlay to a non-default VRF -ip -netns hv-1 link set veth0 vrf vrf-underlay -ip -netns hv-1 link set vxlan0 down -ip -netns hv-1 link set vxlan0 up -ip -netns hv-2 link set veth0 vrf vrf-underlay -ip -netns hv-2 link set vxlan0 down -ip -netns hv-2 link set vxlan0 up +ip -netns $hv_1 link set veth0 vrf vrf-underlay +ip -netns $hv_1 link set vxlan0 down +ip -netns $hv_1 link set vxlan0 up +ip -netns $hv_2 link set veth0 vrf vrf-underlay +ip -netns $hv_2 link set vxlan0 down +ip -netns $hv_2 link set vxlan0 up
echo -n "Check VM connectivity through VXLAN (underlay in a VRF) " -ip netns exec vm-1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false) +ip netns exec $vm_1 ping -c 1 -W 1 10.0.0.2 &> /dev/null || (echo "[FAIL]"; false) echo "[ OK ]"
On Wed, Dec 06, 2023 at 03:07:57PM +0800, Hangbin Liu wrote:
Here is the test result after conversion.
]# ./test_vxlan_under_vrf.sh Checking HV connectivity [ OK ] Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ] Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com
Reviewed-by: Ido Schimmel idosch@nvidia.com Tested-by: Ido Schimmel idosch@nvidia.com
Here is the test result after conversion.
]# ./test_vxlan_vnifiltering.sh TEST: Create traditional vxlan device [ OK ] TEST: Cannot create vnifilter device without external flag [ OK ] TEST: Creating external vxlan device with vnifilter flag [ OK ] ... TEST: VM connectivity over traditional vxlan (ipv6 default rdst) [ OK ] TEST: VM connectivity over metadata nonfiltering vxlan (ipv4 default rdst) [ OK ]
Tests passed: 27 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../selftests/net/test_vxlan_vnifiltering.sh | 154 +++++++++++------- 1 file changed, 95 insertions(+), 59 deletions(-)
diff --git a/tools/testing/selftests/net/test_vxlan_vnifiltering.sh b/tools/testing/selftests/net/test_vxlan_vnifiltering.sh index 8c3ac0a72545..6127a78ee988 100755 --- a/tools/testing/selftests/net/test_vxlan_vnifiltering.sh +++ b/tools/testing/selftests/net/test_vxlan_vnifiltering.sh @@ -78,10 +78,8 @@ # # # This test tests the new vxlan vnifiltering api - +source lib.sh ret=0 -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4
# all tests in this script. Can be overridden with -t option TESTS=" @@ -148,18 +146,18 @@ run_cmd() }
check_hv_connectivity() { - ip netns exec hv-1 ping -c 1 -W 1 $1 &>/dev/null + ip netns exec $hv_1 ping -c 1 -W 1 $1 &>/dev/null sleep 1 - ip netns exec hv-1 ping -c 1 -W 1 $2 &>/dev/null + ip netns exec $hv_1 ping -c 1 -W 1 $2 &>/dev/null
return $? }
check_vm_connectivity() { - run_cmd "ip netns exec vm-11 ping -c 1 -W 1 10.0.10.12" + run_cmd "ip netns exec $vm_11 ping -c 1 -W 1 10.0.10.12" log_test $? 0 "VM connectivity over $1 (ipv4 default rdst)"
- run_cmd "ip netns exec vm-21 ping -c 1 -W 1 10.0.10.22" + run_cmd "ip netns exec $vm_21 ping -c 1 -W 1 10.0.10.22" log_test $? 0 "VM connectivity over $1 (ipv6 default rdst)" }
@@ -167,26 +165,23 @@ cleanup() { ip link del veth-hv-1 2>/dev/null || true ip link del vethhv-11 vethhv-12 vethhv-21 vethhv-22 2>/dev/null || true
- for ns in hv-1 hv-2 vm-11 vm-21 vm-12 vm-22 vm-31 vm-32; do - ip netns del $ns 2>/dev/null || true - done + cleanup_ns $hv_1 $hv_2 $vm_11 $vm_21 $vm_12 $vm_22 $vm_31 $vm_32 }
trap cleanup EXIT
setup-hv-networking() { - hv=$1 + id=$1 local1=$2 mask1=$3 local2=$4 mask2=$5
- ip netns add hv-$hv - ip link set veth-hv-$hv netns hv-$hv - ip -netns hv-$hv link set veth-hv-$hv name veth0 - ip -netns hv-$hv addr add $local1/$mask1 dev veth0 - ip -netns hv-$hv addr add $local2/$mask2 dev veth0 - ip -netns hv-$hv link set veth0 up + ip link set veth-hv-$id netns ${hv[$id]} + ip -netns ${hv[$id]} link set veth-hv-$id name veth0 + ip -netns ${hv[$id]} addr add $local1/$mask1 dev veth0 + ip -netns ${hv[$id]} addr add $local2/$mask2 dev veth0 + ip -netns ${hv[$id]} link set veth0 up }
# Setups a "VM" simulated by a netns an a veth pair @@ -208,21 +203,20 @@ setup-vm() { lastvxlandev=""
# create bridge - ip -netns hv-$hvid link add br$brid type bridge vlan_filtering 1 vlan_default_pvid 0 \ + ip -netns ${hv[$hvid]} link add br$brid type bridge vlan_filtering 1 vlan_default_pvid 0 \ mcast_snooping 0 - ip -netns hv-$hvid link set br$brid up + ip -netns ${hv[$hvid]} link set br$brid up
# create vm namespace and interfaces and connect to hypervisor # namespace - ip netns add vm-$vmid hvvethif="vethhv-$vmid" vmvethif="veth-$vmid" ip link add $hvvethif type veth peer name $vmvethif - ip link set $hvvethif netns hv-$hvid - ip link set $vmvethif netns vm-$vmid - ip -netns hv-$hvid link set $hvvethif up - ip -netns vm-$vmid link set $vmvethif up - ip -netns hv-$hvid link set $hvvethif master br$brid + ip link set $hvvethif netns ${hv[$hvid]} + ip link set $vmvethif netns ${vm[$vmid]} + ip -netns ${hv[$hvid]} link set $hvvethif up + ip -netns ${vm[$vmid]} link set $vmvethif up + ip -netns ${hv[$hvid]} link set $hvvethif master br$brid
# configure VM vlan/vni filtering on hypervisor for vmap in $(echo $vattrs | cut -d "," -f1- --output-delimiter=' ') @@ -234,9 +228,9 @@ setup-vm() { local vtype=$(echo $vmap | awk -F'-' '{print ($5)}') local port=$(echo $vmap | awk -F'-' '{print ($6)}')
- ip -netns vm-$vmid link add name $vmvethif.$vid link $vmvethif type vlan id $vid - ip -netns vm-$vmid addr add 10.0.$vid.$vmid/24 dev $vmvethif.$vid - ip -netns vm-$vmid link set $vmvethif.$vid up + ip -netns ${vm[$vmid]} link add name $vmvethif.$vid link $vmvethif type vlan id $vid + ip -netns ${vm[$vmid]} addr add 10.0.$vid.$vmid/24 dev $vmvethif.$vid + ip -netns ${vm[$vmid]} link set $vmvethif.$vid up
tid=$vid vxlandev="vxlan$brid" @@ -268,35 +262,35 @@ setup-vm() {
# create vxlan device if [ "$vxlandev" != "$lastvxlandev" ]; then - ip -netns hv-$hvid link add $vxlandev type vxlan local $localip $vxlandevflags dev veth0 2>/dev/null - ip -netns hv-$hvid link set $vxlandev master br$brid - ip -netns hv-$hvid link set $vxlandev up + ip -netns ${hv[$hvid]} link add $vxlandev type vxlan local $localip $vxlandevflags dev veth0 2>/dev/null + ip -netns ${hv[$hvid]} link set $vxlandev master br$brid + ip -netns ${hv[$hvid]} link set $vxlandev up lastvxlandev=$vxlandev fi
# add vlan - bridge -netns hv-$hvid vlan add vid $vid dev $hvvethif - bridge -netns hv-$hvid vlan add vid $vid pvid dev $vxlandev + bridge -netns ${hv[$hvid]} vlan add vid $vid dev $hvvethif + bridge -netns ${hv[$hvid]} vlan add vid $vid pvid dev $vxlandev
# Add bridge vni filter for tx if [[ -n $vtype && $vtype == "metadata" || $vtype == "vnifilter" || $vtype == "vnifilterg" ]]; then - bridge -netns hv-$hvid link set dev $vxlandev vlan_tunnel on - bridge -netns hv-$hvid vlan add dev $vxlandev vid $vid tunnel_info id $tid + bridge -netns ${hv[$hvid]} link set dev $vxlandev vlan_tunnel on + bridge -netns ${hv[$hvid]} vlan add dev $vxlandev vid $vid tunnel_info id $tid fi
if [[ -n $vtype && $vtype == "metadata" ]]; then - bridge -netns hv-$hvid fdb add 00:00:00:00:00:00 dev $vxlandev \ + bridge -netns ${hv[$hvid]} fdb add 00:00:00:00:00:00 dev $vxlandev \ src_vni $tid vni $tid dst $group self elif [[ -n $vtype && $vtype == "vnifilter" ]]; then # Add per vni rx filter with 'bridge vni' api - bridge -netns hv-$hvid vni add dev $vxlandev vni $tid + bridge -netns ${hv[$hvid]} vni add dev $vxlandev vni $tid elif [[ -n $vtype && $vtype == "vnifilterg" ]]; then # Add per vni group config with 'bridge vni' api if [ -n "$group" ]; then if [ $mcast -eq 1 ]; then - bridge -netns hv-$hvid vni add dev $vxlandev vni $tid group $group + bridge -netns ${hv[$hvid]} vni add dev $vxlandev vni $tid group $group else - bridge -netns hv-$hvid vni add dev $vxlandev vni $tid remote $group + bridge -netns ${hv[$hvid]} vni add dev $vxlandev vni $tid remote $group fi fi fi @@ -306,14 +300,14 @@ setup-vm() { setup_vnifilter_api() { ip link add veth-host type veth peer name veth-testns - ip netns add testns - ip link set veth-testns netns testns + setup_ns testns + ip link set veth-testns netns $testns }
cleanup_vnifilter_api() { ip link del veth-host 2>/dev/null || true - ip netns del testns 2>/dev/null || true + ip netns del $testns 2>/dev/null || true }
# tests vxlan filtering api @@ -331,52 +325,52 @@ vxlan_vnifilter_api()
# Duplicate vni test # create non-vnifiltering traditional vni device - run_cmd "ip -netns testns link add vxlan100 type vxlan id 100 local $localip dev veth-testns dstport 4789" + run_cmd "ip -netns $testns link add vxlan100 type vxlan id 100 local $localip dev veth-testns dstport 4789" log_test $? 0 "Create traditional vxlan device"
# create vni filtering device - run_cmd "ip -netns testns link add vxlan-ext1 type vxlan vnifilter local $localip dev veth-testns dstport 4789" + run_cmd "ip -netns $testns link add vxlan-ext1 type vxlan vnifilter local $localip dev veth-testns dstport 4789" log_test $? 1 "Cannot create vnifilter device without external flag"
- run_cmd "ip -netns testns link add vxlan-ext1 type vxlan external vnifilter local $localip dev veth-testns dstport 4789" + run_cmd "ip -netns $testns link add vxlan-ext1 type vxlan external vnifilter local $localip dev veth-testns dstport 4789" log_test $? 0 "Creating external vxlan device with vnifilter flag"
- run_cmd "bridge -netns testns vni add dev vxlan-ext1 vni 100" + run_cmd "bridge -netns $testns vni add dev vxlan-ext1 vni 100" log_test $? 0 "Cannot set in-use vni id on vnifiltering device"
- run_cmd "bridge -netns testns vni add dev vxlan-ext1 vni 200" + run_cmd "bridge -netns $testns vni add dev vxlan-ext1 vni 200" log_test $? 0 "Set new vni id on vnifiltering device"
- run_cmd "ip -netns testns link add vxlan-ext2 type vxlan external vnifilter local $localip dev veth-testns dstport 4789" + run_cmd "ip -netns $testns link add vxlan-ext2 type vxlan external vnifilter local $localip dev veth-testns dstport 4789" log_test $? 0 "Create second external vxlan device with vnifilter flag"
- run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 200" + run_cmd "bridge -netns $testns vni add dev vxlan-ext2 vni 200" log_test $? 255 "Cannot set in-use vni id on vnifiltering device"
- run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 300" + run_cmd "bridge -netns $testns vni add dev vxlan-ext2 vni 300" log_test $? 0 "Set new vni id on vnifiltering device"
# check in bridge vni show - run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 300" + run_cmd "bridge -netns $testns vni add dev vxlan-ext2 vni 300" log_test $? 0 "Update vni id on vnifiltering device"
- run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 400" + run_cmd "bridge -netns $testns vni add dev vxlan-ext2 vni 400" log_test $? 0 "Add new vni id on vnifiltering device"
# add multicast group per vni - run_cmd "bridge -netns testns vni add dev vxlan-ext1 vni 200 group $group" + run_cmd "bridge -netns $testns vni add dev vxlan-ext1 vni 200 group $group" log_test $? 0 "Set multicast group on existing vni"
# add multicast group per vni - run_cmd "bridge -netns testns vni add dev vxlan-ext2 vni 300 group $group" + run_cmd "bridge -netns $testns vni add dev vxlan-ext2 vni 300 group $group" log_test $? 0 "Set multicast group on existing vni"
# set vnifilter on an existing external vxlan device - run_cmd "ip -netns testns link set dev vxlan-ext1 type vxlan external vnifilter" + run_cmd "ip -netns $testns link set dev vxlan-ext1 type vxlan external vnifilter" log_test $? 2 "Cannot set vnifilter flag on a device"
# change vxlan vnifilter flag - run_cmd "ip -netns testns link set dev vxlan-ext1 type vxlan external novnifilter" + run_cmd "ip -netns $testns link set dev vxlan-ext1 type vxlan external novnifilter" log_test $? 2 "Cannot unset vnifilter flag on a device" }
@@ -390,12 +384,20 @@ vxlan_vnifilter_datapath() hv1addr2="2002:fee1::1" hv2addr2="2002:fee1::2"
+ setup_ns hv_1 hv_2 + hv[1]=$hv_1 + hv[2]=$hv_2 ip link add veth-hv-1 type veth peer name veth-hv-2 setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64 $hv2addr1 $hv2addr2 setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64 $hv1addr1 $hv1addr2
check_hv_connectivity hv2addr1 hv2addr2
+ setup_ns vm_11 vm_21 vm_12 vm_22 + vm[11]=$vm_11 + vm[21]=$vm_21 + vm[12]=$vm_12 + vm[22]=$vm_22 setup-vm 1 11 1 10-v4-$hv1addr1-$hv2addr1-vnifilter,20-v4-$hv1addr1-$hv2addr1-vnifilter 0 setup-vm 1 21 2 10-v6-$hv1addr2-$hv2addr2-vnifilter,20-v6-$hv1addr2-$hv2addr2-vnifilter 0
@@ -415,12 +417,20 @@ vxlan_vnifilter_datapath_pervni() hv1addr2="2002:fee1::1" hv2addr2="2002:fee1::2"
+ setup_ns hv_1 hv_2 + hv[1]=$hv_1 + hv[2]=$hv_2 ip link add veth-hv-1 type veth peer name veth-hv-2 setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64 setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64
check_hv_connectivity hv2addr1 hv2addr2
+ setup_ns vm_11 vm_21 vm_12 vm_22 + vm[11]=$vm_11 + vm[21]=$vm_21 + vm[12]=$vm_12 + vm[22]=$vm_22 setup-vm 1 11 1 10-v4-$hv1addr1-$hv2addr1-vnifilterg,20-v4-$hv1addr1-$hv2addr1-vnifilterg 0 setup-vm 1 21 2 10-v6-$hv1addr2-$hv2addr2-vnifilterg,20-v6-$hv1addr2-$hv2addr2-vnifilterg 0
@@ -440,12 +450,20 @@ vxlan_vnifilter_datapath_mgroup() group="239.1.1.100" group6="ff07::1"
+ setup_ns hv_1 hv_2 + hv[1]=$hv_1 + hv[2]=$hv_2 ip link add veth-hv-1 type veth peer name veth-hv-2 setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64 setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64
check_hv_connectivity hv2addr1 hv2addr2
+ setup_ns vm_11 vm_21 vm_12 vm_22 + vm[11]=$vm_11 + vm[21]=$vm_21 + vm[12]=$vm_12 + vm[22]=$vm_22 setup-vm 1 11 1 10-v4-$hv1addr1-$group-vnifilter,20-v4-$hv1addr1-$group-vnifilter 1 setup-vm 1 21 2 "10-v6-$hv1addr2-$group6-vnifilter,20-v6-$hv1addr2-$group6-vnifilter" 1
@@ -464,12 +482,20 @@ vxlan_vnifilter_datapath_mgroup_pervni() group="239.1.1.100" group6="ff07::1"
+ setup_ns hv_1 hv_2 + hv[1]=$hv_1 + hv[2]=$hv_2 ip link add veth-hv-1 type veth peer name veth-hv-2 setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64 setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64
check_hv_connectivity hv2addr1 hv2addr2
+ setup_ns vm_11 vm_21 vm_12 vm_22 + vm[11]=$vm_11 + vm[21]=$vm_21 + vm[12]=$vm_12 + vm[22]=$vm_22 setup-vm 1 11 1 10-v4-$hv1addr1-$group-vnifilterg,20-v4-$hv1addr1-$group-vnifilterg 1 setup-vm 1 21 2 10-v6-$hv1addr2-$group6-vnifilterg,20-v6-$hv1addr2-$group6-vnifilterg 1
@@ -486,12 +512,22 @@ vxlan_vnifilter_metadata_and_traditional_mix() hv1addr2="2002:fee1::1" hv2addr2="2002:fee1::2"
+ setup_ns hv_1 hv_2 + hv[1]=$hv_1 + hv[2]=$hv_2 ip link add veth-hv-1 type veth peer name veth-hv-2 setup-hv-networking 1 $hv1addr1 24 $hv1addr2 64 setup-hv-networking 2 $hv2addr1 24 $hv2addr2 64
check_hv_connectivity hv2addr1 hv2addr2
+ setup_ns vm_11 vm_21 vm_31 vm_12 vm_22 vm_32 + vm[11]=$vm_11 + vm[21]=$vm_21 + vm[31]=$vm_31 + vm[12]=$vm_12 + vm[22]=$vm_22 + vm[32]=$vm_32 setup-vm 1 11 1 10-v4-$hv1addr1-$hv2addr1-vnifilter,20-v4-$hv1addr1-$hv2addr1-vnifilter 0 setup-vm 1 21 2 10-v6-$hv1addr2-$hv2addr2-vnifilter,20-v6-$hv1addr2-$hv2addr2-vnifilter 0 setup-vm 1 31 3 30-v4-$hv1addr1-$hv2addr1-default-4790,40-v6-$hv1addr2-$hv2addr2-default-4790,50-v4-$hv1addr1-$hv2addr1-metadata-4791 0 @@ -504,13 +540,13 @@ vxlan_vnifilter_metadata_and_traditional_mix() check_vm_connectivity "vnifiltering vxlan pervni remote mix"
# check VM connectivity over traditional/non-vxlan filtering vxlan devices - run_cmd "ip netns exec vm-31 ping -c 1 -W 1 10.0.30.32" + run_cmd "ip netns exec $vm_31 ping -c 1 -W 1 10.0.30.32" log_test $? 0 "VM connectivity over traditional vxlan (ipv4 default rdst)"
- run_cmd "ip netns exec vm-31 ping -c 1 -W 1 10.0.40.32" + run_cmd "ip netns exec $vm_31 ping -c 1 -W 1 10.0.40.32" log_test $? 0 "VM connectivity over traditional vxlan (ipv6 default rdst)"
- run_cmd "ip netns exec vm-31 ping -c 1 -W 1 10.0.50.32" + run_cmd "ip netns exec $vm_31 ping -c 1 -W 1 10.0.50.32" log_test $? 0 "VM connectivity over metadata nonfiltering vxlan (ipv4 default rdst)" }
On Wed, Dec 06, 2023 at 03:07:58PM +0800, Hangbin Liu wrote:
Here is the test result after conversion.
]# ./test_vxlan_vnifiltering.sh TEST: Create traditional vxlan device [ OK ] TEST: Cannot create vnifilter device without external flag [ OK ] TEST: Creating external vxlan device with vnifilter flag [ OK ] ... TEST: VM connectivity over traditional vxlan (ipv6 default rdst) [ OK ] TEST: VM connectivity over metadata nonfiltering vxlan (ipv4 default rdst) [ OK ]
Tests passed: 27 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com
Reviewed-by: Ido Schimmel idosch@nvidia.com Tested-by: Ido Schimmel idosch@nvidia.com
Here is the test result after conversion.
]# ./vrf_route_leaking.sh
########################################################################### IPv4 (sym route): VRF ICMP ttl error route lookup ping ###########################################################################
TEST: Basic IPv4 connectivity [ OK ] TEST: Ping received ICMP ttl exceeded [ OK ]
...
TEST: Basic IPv6 connectivity [ OK ] TEST: Traceroute6 reports a hop on r1 [ OK ]
Tests passed: 18 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../selftests/net/vrf_route_leaking.sh | 201 +++++++++--------- 1 file changed, 96 insertions(+), 105 deletions(-)
diff --git a/tools/testing/selftests/net/vrf_route_leaking.sh b/tools/testing/selftests/net/vrf_route_leaking.sh index dedc52562b4f..2da32f4c479b 100755 --- a/tools/testing/selftests/net/vrf_route_leaking.sh +++ b/tools/testing/selftests/net/vrf_route_leaking.sh @@ -58,6 +58,7 @@ # to send an ICMP error back to the source when the ttl of a packet reaches 1 # while it is forwarded between different vrfs.
+source lib.sh VERBOSE=0 PAUSE_ON_FAIL=no DEFAULT_TTYPE=sym @@ -171,11 +172,7 @@ run_cmd_grep()
cleanup() { - local ns - - for ns in h1 h2 r1 r2; do - ip netns del $ns 2>/dev/null - done + cleanup_ns $h1 $h2 $r1 $r2 }
setup_vrf() @@ -212,72 +209,69 @@ setup_sym()
# # create nodes as namespaces - # - for ns in h1 h2 r1; do - ip netns add $ns - ip -netns $ns link set lo up - - case "${ns}" in - h[12]) ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0 - ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1 - ;; - r1) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 - ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 - esac + setup_ns h1 h2 r1 + for ns in $h1 $h2 $r1; do + if echo $ns | grep -q h[12]-; then + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0 + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1 + else + ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 + fi done
# # create interconnects # - ip -netns h1 link add eth0 type veth peer name r1h1 - ip -netns h1 link set r1h1 netns r1 name eth0 up + ip -netns $h1 link add eth0 type veth peer name r1h1 + ip -netns $h1 link set r1h1 netns $r1 name eth0 up
- ip -netns h2 link add eth0 type veth peer name r1h2 - ip -netns h2 link set r1h2 netns r1 name eth1 up + ip -netns $h2 link add eth0 type veth peer name r1h2 + ip -netns $h2 link set r1h2 netns $r1 name eth1 up
# # h1 # - ip -netns h1 addr add dev eth0 ${H1_N1_IP}/24 - ip -netns h1 -6 addr add dev eth0 ${H1_N1_IP6}/64 nodad - ip -netns h1 link set eth0 up + ip -netns $h1 addr add dev eth0 ${H1_N1_IP}/24 + ip -netns $h1 -6 addr add dev eth0 ${H1_N1_IP6}/64 nodad + ip -netns $h1 link set eth0 up
# h1 to h2 via r1 - ip -netns h1 route add ${H2_N2} via ${R1_N1_IP} dev eth0 - ip -netns h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev eth0 + ip -netns $h1 route add ${H2_N2} via ${R1_N1_IP} dev eth0 + ip -netns $h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev eth0
# # h2 # - ip -netns h2 addr add dev eth0 ${H2_N2_IP}/24 - ip -netns h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad - ip -netns h2 link set eth0 up + ip -netns $h2 addr add dev eth0 ${H2_N2_IP}/24 + ip -netns $h2 -6 addr add dev eth0 ${H2_N2_IP6}/64 nodad + ip -netns $h2 link set eth0 up
# h2 to h1 via r1 - ip -netns h2 route add default via ${R1_N2_IP} dev eth0 - ip -netns h2 -6 route add default via ${R1_N2_IP6} dev eth0 + ip -netns $h2 route add default via ${R1_N2_IP} dev eth0 + ip -netns $h2 -6 route add default via ${R1_N2_IP6} dev eth0
# # r1 # - setup_vrf r1 - create_vrf r1 blue 1101 - create_vrf r1 red 1102 - ip -netns r1 link set mtu 1400 dev eth1 - ip -netns r1 link set eth0 vrf blue up - ip -netns r1 link set eth1 vrf red up - ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24 - ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad - ip -netns r1 addr add dev eth1 ${R1_N2_IP}/24 - ip -netns r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad + setup_vrf $r1 + create_vrf $r1 blue 1101 + create_vrf $r1 red 1102 + ip -netns $r1 link set mtu 1400 dev eth1 + ip -netns $r1 link set eth0 vrf blue up + ip -netns $r1 link set eth1 vrf red up + ip -netns $r1 addr add dev eth0 ${R1_N1_IP}/24 + ip -netns $r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad + ip -netns $r1 addr add dev eth1 ${R1_N2_IP}/24 + ip -netns $r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
# Route leak from blue to red - ip -netns r1 route add vrf blue ${H2_N2} dev red - ip -netns r1 -6 route add vrf blue ${H2_N2_6} dev red + ip -netns $r1 route add vrf blue ${H2_N2} dev red + ip -netns $r1 -6 route add vrf blue ${H2_N2_6} dev red
# Route leak from red to blue - ip -netns r1 route add vrf red ${H1_N1} dev blue - ip -netns r1 -6 route add vrf red ${H1_N1_6} dev blue + ip -netns $r1 route add vrf red ${H1_N1} dev blue + ip -netns $r1 -6 route add vrf red ${H1_N1_6} dev blue
# Wait for ip config to settle @@ -293,90 +287,87 @@ setup_asym()
# # create nodes as namespaces - # - for ns in h1 h2 r1 r2; do - ip netns add $ns - ip -netns $ns link set lo up - - case "${ns}" in - h[12]) ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0 - ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1 - ;; - r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 - ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 - esac + setup_ns h1 h2 r1 r2 + for ns in $h1 $h2 $r1 $r2; do + if echo $ns | grep -q h[12]-; then + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=0 + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.keep_addr_on_down=1 + else + ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 + ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 + fi done
# # create interconnects # - ip -netns h1 link add eth0 type veth peer name r1h1 - ip -netns h1 link set r1h1 netns r1 name eth0 up + ip -netns $h1 link add eth0 type veth peer name r1h1 + ip -netns $h1 link set r1h1 netns $r1 name eth0 up
- ip -netns h1 link add eth1 type veth peer name r2h1 - ip -netns h1 link set r2h1 netns r2 name eth0 up + ip -netns $h1 link add eth1 type veth peer name r2h1 + ip -netns $h1 link set r2h1 netns $r2 name eth0 up
- ip -netns h2 link add eth0 type veth peer name r1h2 - ip -netns h2 link set r1h2 netns r1 name eth1 up + ip -netns $h2 link add eth0 type veth peer name r1h2 + ip -netns $h2 link set r1h2 netns $r1 name eth1 up
- ip -netns h2 link add eth1 type veth peer name r2h2 - ip -netns h2 link set r2h2 netns r2 name eth1 up + ip -netns $h2 link add eth1 type veth peer name r2h2 + ip -netns $h2 link set r2h2 netns $r2 name eth1 up
# # h1 # - ip -netns h1 link add br0 type bridge - ip -netns h1 link set br0 up - ip -netns h1 addr add dev br0 ${H1_N1_IP}/24 - ip -netns h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad - ip -netns h1 link set eth0 master br0 up - ip -netns h1 link set eth1 master br0 up + ip -netns $h1 link add br0 type bridge + ip -netns $h1 link set br0 up + ip -netns $h1 addr add dev br0 ${H1_N1_IP}/24 + ip -netns $h1 -6 addr add dev br0 ${H1_N1_IP6}/64 nodad + ip -netns $h1 link set eth0 master br0 up + ip -netns $h1 link set eth1 master br0 up
# h1 to h2 via r1 - ip -netns h1 route add ${H2_N2} via ${R1_N1_IP} dev br0 - ip -netns h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev br0 + ip -netns $h1 route add ${H2_N2} via ${R1_N1_IP} dev br0 + ip -netns $h1 -6 route add ${H2_N2_6} via "${R1_N1_IP6}" dev br0
# # h2 # - ip -netns h2 link add br0 type bridge - ip -netns h2 link set br0 up - ip -netns h2 addr add dev br0 ${H2_N2_IP}/24 - ip -netns h2 -6 addr add dev br0 ${H2_N2_IP6}/64 nodad - ip -netns h2 link set eth0 master br0 up - ip -netns h2 link set eth1 master br0 up + ip -netns $h2 link add br0 type bridge + ip -netns $h2 link set br0 up + ip -netns $h2 addr add dev br0 ${H2_N2_IP}/24 + ip -netns $h2 -6 addr add dev br0 ${H2_N2_IP6}/64 nodad + ip -netns $h2 link set eth0 master br0 up + ip -netns $h2 link set eth1 master br0 up
# h2 to h1 via r2 - ip -netns h2 route add default via ${R2_N2_IP} dev br0 - ip -netns h2 -6 route add default via ${R2_N2_IP6} dev br0 + ip -netns $h2 route add default via ${R2_N2_IP} dev br0 + ip -netns $h2 -6 route add default via ${R2_N2_IP6} dev br0
# # r1 # - setup_vrf r1 - create_vrf r1 blue 1101 - create_vrf r1 red 1102 - ip -netns r1 link set mtu 1400 dev eth1 - ip -netns r1 link set eth0 vrf blue up - ip -netns r1 link set eth1 vrf red up - ip -netns r1 addr add dev eth0 ${R1_N1_IP}/24 - ip -netns r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad - ip -netns r1 addr add dev eth1 ${R1_N2_IP}/24 - ip -netns r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad + setup_vrf $r1 + create_vrf $r1 blue 1101 + create_vrf $r1 red 1102 + ip -netns $r1 link set mtu 1400 dev eth1 + ip -netns $r1 link set eth0 vrf blue up + ip -netns $r1 link set eth1 vrf red up + ip -netns $r1 addr add dev eth0 ${R1_N1_IP}/24 + ip -netns $r1 -6 addr add dev eth0 ${R1_N1_IP6}/64 nodad + ip -netns $r1 addr add dev eth1 ${R1_N2_IP}/24 + ip -netns $r1 -6 addr add dev eth1 ${R1_N2_IP6}/64 nodad
# Route leak from blue to red - ip -netns r1 route add vrf blue ${H2_N2} dev red - ip -netns r1 -6 route add vrf blue ${H2_N2_6} dev red + ip -netns $r1 route add vrf blue ${H2_N2} dev red + ip -netns $r1 -6 route add vrf blue ${H2_N2_6} dev red
# No route leak from red to blue
# # r2 # - ip -netns r2 addr add dev eth0 ${R2_N1_IP}/24 - ip -netns r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad - ip -netns r2 addr add dev eth1 ${R2_N2_IP}/24 - ip -netns r2 -6 addr add dev eth1 ${R2_N2_IP6}/64 nodad + ip -netns $r2 addr add dev eth0 ${R2_N1_IP}/24 + ip -netns $r2 -6 addr add dev eth0 ${R2_N1_IP6}/64 nodad + ip -netns $r2 addr add dev eth1 ${R2_N2_IP}/24 + ip -netns $r2 -6 addr add dev eth1 ${R2_N2_IP6}/64 nodad
# Wait for ip config to settle sleep 2 @@ -384,14 +375,14 @@ setup_asym()
check_connectivity() { - ip netns exec h1 ping -c1 -w1 ${H2_N2_IP} >/dev/null 2>&1 + ip netns exec $h1 ping -c1 -w1 ${H2_N2_IP} >/dev/null 2>&1 log_test $? 0 "Basic IPv4 connectivity" return $? }
check_connectivity6() { - ip netns exec h1 "${ping6}" -c1 -w1 ${H2_N2_IP6} >/dev/null 2>&1 + ip netns exec $h1 "${ping6}" -c1 -w1 ${H2_N2_IP6} >/dev/null 2>&1 log_test $? 0 "Basic IPv6 connectivity" return $? } @@ -426,7 +417,7 @@ ipv4_traceroute()
check_connectivity || return
- run_cmd_grep "${R1_N1_IP}" ip netns exec h1 traceroute ${H2_N2_IP} + run_cmd_grep "${R1_N1_IP}" ip netns exec $h1 traceroute ${H2_N2_IP} log_test $? 0 "Traceroute reports a hop on r1" }
@@ -449,7 +440,7 @@ ipv6_traceroute()
check_connectivity6 || return
- run_cmd_grep "${R1_N1_IP6}" ip netns exec h1 traceroute6 ${H2_N2_IP6} + run_cmd_grep "${R1_N1_IP6}" ip netns exec $h1 traceroute6 ${H2_N2_IP6} log_test $? 0 "Traceroute6 reports a hop on r1" }
@@ -470,7 +461,7 @@ ipv4_ping_ttl()
check_connectivity || return
- run_cmd_grep "Time to live exceeded" ip netns exec h1 ping -t1 -c1 -W2 ${H2_N2_IP} + run_cmd_grep "Time to live exceeded" ip netns exec $h1 ping -t1 -c1 -W2 ${H2_N2_IP} log_test $? 0 "Ping received ICMP ttl exceeded" }
@@ -491,7 +482,7 @@ ipv4_ping_frag()
check_connectivity || return
- run_cmd_grep "Frag needed" ip netns exec h1 ping -s 1450 -Mdo -c1 -W2 ${H2_N2_IP} + run_cmd_grep "Frag needed" ip netns exec $h1 ping -s 1450 -Mdo -c1 -W2 ${H2_N2_IP} log_test $? 0 "Ping received ICMP Frag needed" }
@@ -512,7 +503,7 @@ ipv6_ping_ttl()
check_connectivity6 || return
- run_cmd_grep "Time exceeded: Hop limit" ip netns exec h1 "${ping6}" -t1 -c1 -W2 ${H2_N2_IP6} + run_cmd_grep "Time exceeded: Hop limit" ip netns exec $h1 "${ping6}" -t1 -c1 -W2 ${H2_N2_IP6} log_test $? 0 "Ping received ICMP Hop limit" }
@@ -533,7 +524,7 @@ ipv6_ping_frag()
check_connectivity6 || return
- run_cmd_grep "Packet too big" ip netns exec h1 "${ping6}" -s 1450 -Mdo -c1 -W2 ${H2_N2_IP6} + run_cmd_grep "Packet too big" ip netns exec $h1 "${ping6}" -s 1450 -Mdo -c1 -W2 ${H2_N2_IP6} log_test $? 0 "Ping received ICMP Packet too big" }
Here is the test result after conversion.
]# ./vrf_strict_mode_test.sh
################################################################################ TEST SECTION: VRF strict_mode test on init network namespace ################################################################################
TEST: init: net.vrf.strict_mode is available [ OK ]
TEST: init: strict_mode=0 by default, 0 vrfs [ OK ]
...
TEST: init: check strict_mode=1 [ OK ]
TEST: testns-HvoZkB: check strict_mode=0 [ OK ]
Tests passed: 37 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../selftests/net/vrf_strict_mode_test.sh | 47 +++++++++---------- 1 file changed, 22 insertions(+), 25 deletions(-)
diff --git a/tools/testing/selftests/net/vrf_strict_mode_test.sh b/tools/testing/selftests/net/vrf_strict_mode_test.sh index 417d214264f3..01552b542544 100755 --- a/tools/testing/selftests/net/vrf_strict_mode_test.sh +++ b/tools/testing/selftests/net/vrf_strict_mode_test.sh @@ -3,9 +3,7 @@
# This test is designed for testing the new VRF strict_mode functionality.
-# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - +source lib.sh ret=0
# identifies the "init" network namespace which is often called root network @@ -247,13 +245,12 @@ setup() { modprobe vrf
- ip netns add testns - ip netns exec testns ip link set lo up + setup_ns testns }
cleanup() { - ip netns del testns 2>/dev/null + ip netns del $testns 2>/dev/null
ip link del vrf100 2>/dev/null ip link del vrf101 2>/dev/null @@ -298,28 +295,28 @@ vrf_strict_mode_tests_testns() { log_section "VRF strict_mode test on testns network namespace"
- vrf_strict_mode_check_support testns + vrf_strict_mode_check_support $testns
- strict_mode_check_default testns + strict_mode_check_default $testns
- enable_strict_mode_and_check testns + enable_strict_mode_and_check $testns
- add_vrf_and_check testns vrf100 100 - config_vrf_and_check testns 10.0.100.1/24 vrf100 + add_vrf_and_check $testns vrf100 100 + config_vrf_and_check $testns 10.0.100.1/24 vrf100
- add_vrf_and_check_fail testns vrf101 100 + add_vrf_and_check_fail $testns vrf101 100
- add_vrf_and_check_fail testns vrf102 100 + add_vrf_and_check_fail $testns vrf102 100
- add_vrf_and_check testns vrf200 200 + add_vrf_and_check $testns vrf200 200
- disable_strict_mode_and_check testns + disable_strict_mode_and_check $testns
- add_vrf_and_check testns vrf101 100 + add_vrf_and_check $testns vrf101 100
- add_vrf_and_check testns vrf102 100 + add_vrf_and_check $testns vrf102 100
- #the strict_mode is disabled in the testns + #the strict_mode is disabled in the $testns }
vrf_strict_mode_tests_mix() @@ -328,25 +325,25 @@ vrf_strict_mode_tests_mix()
read_strict_mode_compare_and_check init 1
- read_strict_mode_compare_and_check testns 0 + read_strict_mode_compare_and_check $testns 0
- del_vrf_and_check testns vrf101 + del_vrf_and_check $testns vrf101
- del_vrf_and_check testns vrf102 + del_vrf_and_check $testns vrf102
disable_strict_mode_and_check init
- enable_strict_mode_and_check testns + enable_strict_mode_and_check $testns
enable_strict_mode_and_check init enable_strict_mode_and_check init
- disable_strict_mode_and_check testns - disable_strict_mode_and_check testns + disable_strict_mode_and_check $testns + disable_strict_mode_and_check $testns
read_strict_mode_compare_and_check init 1
- read_strict_mode_compare_and_check testns 0 + read_strict_mode_compare_and_check $testns 0 }
################################################################################
Here is the test result after conversion.
]# ./vrf-xfrm-tests.sh
No qdisc on VRF device TEST: IPv4 no xfrm policy [ OK ] TEST: IPv6 no xfrm policy [ OK ] TEST: IPv4 xfrm policy based on address [ OK ] TEST: IPv6 xfrm policy based on address [ OK ] TEST: IPv6 xfrm policy with VRF in selector [ OK ] TEST: IPv4 xfrm policy with xfrm device [ OK ] TEST: IPv6 xfrm policy with xfrm device [ OK ]
netem qdisc on VRF device TEST: IPv4 no xfrm policy [ OK ] TEST: IPv6 no xfrm policy [ OK ] TEST: IPv4 xfrm policy based on address [ OK ] TEST: IPv6 xfrm policy based on address [ OK ] TEST: IPv6 xfrm policy with VRF in selector [ OK ] TEST: IPv4 xfrm policy with xfrm device [ OK ] TEST: IPv6 xfrm policy with xfrm device [ OK ]
Tests passed: 14 Tests failed: 0
Acked-by: David Ahern dsahern@kernel.org Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- tools/testing/selftests/net/vrf-xfrm-tests.sh | 77 +++++++++---------- 1 file changed, 36 insertions(+), 41 deletions(-)
diff --git a/tools/testing/selftests/net/vrf-xfrm-tests.sh b/tools/testing/selftests/net/vrf-xfrm-tests.sh index 452638ae8aed..b64dd891699d 100755 --- a/tools/testing/selftests/net/vrf-xfrm-tests.sh +++ b/tools/testing/selftests/net/vrf-xfrm-tests.sh @@ -3,9 +3,7 @@ # # Various combinations of VRF with xfrms and qdisc.
-# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - +source lib.sh PAUSE_ON_FAIL=no VERBOSE=0 ret=0 @@ -67,7 +65,7 @@ run_cmd_host1() printf " COMMAND: $cmd\n" fi
- out=$(eval ip netns exec host1 $cmd 2>&1) + out=$(eval ip netns exec $host1 $cmd 2>&1) rc=$? if [ "$VERBOSE" = "1" ]; then if [ -n "$out" ]; then @@ -116,9 +114,6 @@ create_ns() [ -z "${addr}" ] && addr="-" [ -z "${addr6}" ] && addr6="-"
- ip netns add ${ns} - - ip -netns ${ns} link set lo up if [ "${addr}" != "-" ]; then ip -netns ${ns} addr add dev lo ${addr} fi @@ -177,25 +172,25 @@ connect_ns()
cleanup() { - ip netns del host1 - ip netns del host2 + cleanup_ns $host1 $host2 }
setup() { - create_ns "host1" - create_ns "host2" + setup_ns host1 host2 + create_ns "$host1" + create_ns "$host2"
- connect_ns "host1" eth0 ${HOST1_4}/24 ${HOST1_6}/64 \ - "host2" eth0 ${HOST2_4}/24 ${HOST2_6}/64 + connect_ns "$host1" eth0 ${HOST1_4}/24 ${HOST1_6}/64 \ + "$host2" eth0 ${HOST2_4}/24 ${HOST2_6}/64
- create_vrf "host1" ${VRF} ${TABLE} - ip -netns host1 link set dev eth0 master ${VRF} + create_vrf "$host1" ${VRF} ${TABLE} + ip -netns $host1 link set dev eth0 master ${VRF} }
cleanup_xfrm() { - for ns in host1 host2 + for ns in $host1 $host2 do for x in state policy do @@ -218,57 +213,57 @@ setup_xfrm() #
# host1 - IPv4 out - ip -netns host1 xfrm policy add \ + ip -netns $host1 xfrm policy add \ src ${h1_4} dst ${h2_4} ${devarg} dir out \ tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel
# host2 - IPv4 in - ip -netns host2 xfrm policy add \ + ip -netns $host2 xfrm policy add \ src ${h1_4} dst ${h2_4} dir in \ tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel
# host1 - IPv4 in - ip -netns host1 xfrm policy add \ + ip -netns $host1 xfrm policy add \ src ${h2_4} dst ${h1_4} ${devarg} dir in \ tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel
# host2 - IPv4 out - ip -netns host2 xfrm policy add \ + ip -netns $host2 xfrm policy add \ src ${h2_4} dst ${h1_4} dir out \ tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel
# host1 - IPv6 out - ip -6 -netns host1 xfrm policy add \ + ip -6 -netns $host1 xfrm policy add \ src ${h1_6} dst ${h2_6} ${devarg} dir out \ tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel
# host2 - IPv6 in - ip -6 -netns host2 xfrm policy add \ + ip -6 -netns $host2 xfrm policy add \ src ${h1_6} dst ${h2_6} dir in \ tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel
# host1 - IPv6 in - ip -6 -netns host1 xfrm policy add \ + ip -6 -netns $host1 xfrm policy add \ src ${h2_6} dst ${h1_6} ${devarg} dir in \ tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel
# host2 - IPv6 out - ip -6 -netns host2 xfrm policy add \ + ip -6 -netns $host2 xfrm policy add \ src ${h2_6} dst ${h1_6} dir out \ tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel
# # state # - ip -netns host1 xfrm state add src ${HOST1_4} dst ${HOST2_4} \ + ip -netns $host1 xfrm state add src ${HOST1_4} dst ${HOST2_4} \ proto esp spi ${SPI_1} reqid 0 mode tunnel \ replay-window 4 replay-oseq 0x4 \ auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \ enc 'cbc(aes)' ${ENC_1} \ sel src ${h1_4} dst ${h2_4} ${devarg}
- ip -netns host2 xfrm state add src ${HOST1_4} dst ${HOST2_4} \ + ip -netns $host2 xfrm state add src ${HOST1_4} dst ${HOST2_4} \ proto esp spi ${SPI_1} reqid 0 mode tunnel \ replay-window 4 replay-oseq 0x4 \ auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \ @@ -276,14 +271,14 @@ setup_xfrm() sel src ${h1_4} dst ${h2_4}
- ip -netns host1 xfrm state add src ${HOST2_4} dst ${HOST1_4} \ + ip -netns $host1 xfrm state add src ${HOST2_4} dst ${HOST1_4} \ proto esp spi ${SPI_2} reqid 0 mode tunnel \ replay-window 4 replay-oseq 0x4 \ auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \ enc 'cbc(aes)' ${ENC_2} \ sel src ${h2_4} dst ${h1_4} ${devarg}
- ip -netns host2 xfrm state add src ${HOST2_4} dst ${HOST1_4} \ + ip -netns $host2 xfrm state add src ${HOST2_4} dst ${HOST1_4} \ proto esp spi ${SPI_2} reqid 0 mode tunnel \ replay-window 4 replay-oseq 0x4 \ auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \ @@ -291,14 +286,14 @@ setup_xfrm() sel src ${h2_4} dst ${h1_4}
- ip -6 -netns host1 xfrm state add src ${HOST1_6} dst ${HOST2_6} \ + ip -6 -netns $host1 xfrm state add src ${HOST1_6} dst ${HOST2_6} \ proto esp spi ${SPI_1} reqid 0 mode tunnel \ replay-window 4 replay-oseq 0x4 \ auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \ enc 'cbc(aes)' ${ENC_1} \ sel src ${h1_6} dst ${h2_6} ${devarg}
- ip -6 -netns host2 xfrm state add src ${HOST1_6} dst ${HOST2_6} \ + ip -6 -netns $host2 xfrm state add src ${HOST1_6} dst ${HOST2_6} \ proto esp spi ${SPI_1} reqid 0 mode tunnel \ replay-window 4 replay-oseq 0x4 \ auth-trunc 'hmac(sha1)' ${AUTH_1} 96 \ @@ -306,14 +301,14 @@ setup_xfrm() sel src ${h1_6} dst ${h2_6}
- ip -6 -netns host1 xfrm state add src ${HOST2_6} dst ${HOST1_6} \ + ip -6 -netns $host1 xfrm state add src ${HOST2_6} dst ${HOST1_6} \ proto esp spi ${SPI_2} reqid 0 mode tunnel \ replay-window 4 replay-oseq 0x4 \ auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \ enc 'cbc(aes)' ${ENC_2} \ sel src ${h2_6} dst ${h1_6} ${devarg}
- ip -6 -netns host2 xfrm state add src ${HOST2_6} dst ${HOST1_6} \ + ip -6 -netns $host2 xfrm state add src ${HOST2_6} dst ${HOST1_6} \ proto esp spi ${SPI_2} reqid 0 mode tunnel \ replay-window 4 replay-oseq 0x4 \ auth-trunc 'hmac(sha1)' ${AUTH_2} 96 \ @@ -323,22 +318,22 @@ setup_xfrm()
cleanup_xfrm_dev() { - ip -netns host1 li del xfrm0 - ip -netns host2 addr del ${XFRM2_4}/24 dev eth0 - ip -netns host2 addr del ${XFRM2_6}/64 dev eth0 + ip -netns $host1 li del xfrm0 + ip -netns $host2 addr del ${XFRM2_4}/24 dev eth0 + ip -netns $host2 addr del ${XFRM2_6}/64 dev eth0 }
setup_xfrm_dev() { local vrfarg="vrf ${VRF}"
- ip -netns host1 li add type xfrm dev eth0 if_id ${IF_ID} - ip -netns host1 li set xfrm0 ${vrfarg} up - ip -netns host1 addr add ${XFRM1_4}/24 dev xfrm0 - ip -netns host1 addr add ${XFRM1_6}/64 dev xfrm0 + ip -netns $host1 li add type xfrm dev eth0 if_id ${IF_ID} + ip -netns $host1 li set xfrm0 ${vrfarg} up + ip -netns $host1 addr add ${XFRM1_4}/24 dev xfrm0 + ip -netns $host1 addr add ${XFRM1_6}/64 dev xfrm0
- ip -netns host2 addr add ${XFRM2_4}/24 dev eth0 - ip -netns host2 addr add ${XFRM2_6}/64 dev eth0 + ip -netns $host2 addr add ${XFRM2_4}/24 dev eth0 + ip -netns $host2 addr add ${XFRM2_6}/64 dev eth0
setup_xfrm ${XFRM1_4} ${XFRM2_4} ${XFRM1_6} ${XFRM2_6} "if_id ${IF_ID}" }
Hello:
This series was applied to netdev/net-next.git (main) by David S. Miller davem@davemloft.net:
On Wed, 6 Dec 2023 15:07:52 +0800 you wrote:
Here is the 2nd part of converting net selftests to run in unique namespace. This part converts all bridge, vxlan, vrf tests.
Here is the part 1 link: https://lore.kernel.org/netdev/20231202020110.362433-1-liuhangbin@gmail.com
Hangbin Liu (9): selftests/net: convert test_bridge_backup_port.sh to run it in unique namespace selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace selftests/net: convert test_vxlan_mdb.sh to run it in unique namespace selftests/net: convert test_vxlan_nolocalbypass.sh to run it in unique namespace selftests/net: convert test_vxlan_under_vrf.sh to run it in unique namespace selftests/net: convert test_vxlan_vnifiltering.sh to run it in unique namespace selftests/net: convert vrf_route_leaking.sh to run it in unique namespace selftests/net: convert vrf_strict_mode_test.sh to run it in unique namespace selftests/net: convert vrf-xfrm-tests.sh to run it in unique namespace
[...]
Here is the summary with links: - [net-next,1/9] selftests/net: convert test_bridge_backup_port.sh to run it in unique namespace https://git.kernel.org/netdev/net-next/c/4624a78c18c6 - [net-next,2/9] selftests/net: convert test_bridge_neigh_suppress.sh to run it in unique namespace https://git.kernel.org/netdev/net-next/c/312abe3d93a3 - [net-next,3/9] selftests/net: convert test_vxlan_mdb.sh to run it in unique namespace https://git.kernel.org/netdev/net-next/c/a8258e64ca74 - [net-next,4/9] selftests/net: convert test_vxlan_nolocalbypass.sh to run it in unique namespace https://git.kernel.org/netdev/net-next/c/d79e907b425d - [net-next,5/9] selftests/net: convert test_vxlan_under_vrf.sh to run it in unique namespace https://git.kernel.org/netdev/net-next/c/d6aab1f63297 - [net-next,6/9] selftests/net: convert test_vxlan_vnifiltering.sh to run it in unique namespace https://git.kernel.org/netdev/net-next/c/5ece8371747d - [net-next,7/9] selftests/net: convert vrf_route_leaking.sh to run it in unique namespace https://git.kernel.org/netdev/net-next/c/bedc99abcaf8 - [net-next,8/9] selftests/net: convert vrf_strict_mode_test.sh to run it in unique namespace https://git.kernel.org/netdev/net-next/c/51f64acbe36e - [net-next,9/9] selftests/net: convert vrf-xfrm-tests.sh to run it in unique namespace https://git.kernel.org/netdev/net-next/c/61b12ebe439a
You are awesome, thank you!
linux-kselftest-mirror@lists.linaro.org
-
Hangbin Liu -
Ido Schimmel -
patchwork-bot+netdevbpf＠kernel.org