The referenced fix is incomplete. It correctly computes bond_dev->gso_partial_features across slaves, but unfortunately netdev_fix_features discards gso_partial_features from the feature set if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features.
This is visible with ethtool -k bond0 | grep esp: tx-esp-segmentation: off [requested on] esp-hw-offload: on esp-tx-csum-hw-offload: on
This patch reworks the bonding GSO offload support by: - making aggregating gso_partial_features across slaves similar to the other feature sets (this part is a no-op). - advertising the default partial gso features on empty bond devs, same as with other feature sets (also a no-op). - adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves. - adding NETIF_F_GSO_PARTIAL to features in bond_setup()
With all of these, 'ethtool -k bond0 | grep esp' now reports: tx-esp-segmentation: on esp-hw-offload: on esp-tx-csum-hw-offload: on
Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support") Signed-off-by: Cosmin Ratiu cratiu@nvidia.com --- drivers/net/bonding/bond_main.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7b78c2bada81..e45bba240cbc 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1538,17 +1538,20 @@ static netdev_features_t bond_fix_features(struct net_device *dev, NETIF_F_HIGHDMA | NETIF_F_LRO)
#define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ - NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE) + NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE | \ + NETIF_F_GSO_PARTIAL)
#define BOND_MPLS_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ NETIF_F_GSO_SOFTWARE)
+#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP) +
static void bond_compute_features(struct bonding *bond) { + netdev_features_t gso_partial_features = BOND_GSO_PARTIAL_FEATURES; unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM; - netdev_features_t gso_partial_features = NETIF_F_GSO_ESP; netdev_features_t vlan_features = BOND_VLAN_FEATURES; netdev_features_t enc_features = BOND_ENC_FEATURES; #ifdef CONFIG_XFRM_OFFLOAD @@ -1582,8 +1585,9 @@ static void bond_compute_features(struct bonding *bond) BOND_XFRM_FEATURES); #endif /* CONFIG_XFRM_OFFLOAD */
- if (slave->dev->hw_enc_features & NETIF_F_GSO_PARTIAL) - gso_partial_features &= slave->dev->gso_partial_features; + gso_partial_features = netdev_increment_features(gso_partial_features, + slave->dev->gso_partial_features, + BOND_GSO_PARTIAL_FEATURES);
mpls_features = netdev_increment_features(mpls_features, slave->dev->mpls_features, @@ -1598,12 +1602,8 @@ static void bond_compute_features(struct bonding *bond) } bond_dev->hard_header_len = max_hard_header_len;
- if (gso_partial_features & NETIF_F_GSO_ESP) - bond_dev->gso_partial_features |= NETIF_F_GSO_ESP; - else - bond_dev->gso_partial_features &= ~NETIF_F_GSO_ESP; - done: + bond_dev->gso_partial_features = gso_partial_features; bond_dev->vlan_features = vlan_features; bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL | NETIF_F_HW_VLAN_CTAG_TX | @@ -6046,6 +6046,7 @@ void bond_setup(struct net_device *bond_dev) bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL; bond_dev->features |= bond_dev->hw_features; bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX; + bond_dev->features |= NETIF_F_GSO_PARTIAL; #ifdef CONFIG_XFRM_OFFLOAD bond_dev->hw_features |= BOND_XFRM_FEATURES; /* Only enable XFRM features if this is an active-backup config */
On Fri, Jan 24, 2025 at 10:57:44AM +0200, Cosmin Ratiu wrote:
drivers/net/bonding/bond_main.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7b78c2bada81..e45bba240cbc 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1538,17 +1538,20 @@ static netdev_features_t bond_fix_features(struct net_device *dev, NETIF_F_HIGHDMA | NETIF_F_LRO) #define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE)
NETIF_F_RXCSUM | NETIF_F_GSO_SOFTWARE | \
NETIF_F_GSO_PARTIAL)
#define BOND_MPLS_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ NETIF_F_GSO_SOFTWARE) +#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP)
static void bond_compute_features(struct bonding *bond) {
- netdev_features_t gso_partial_features = BOND_GSO_PARTIAL_FEATURES; unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM;
- netdev_features_t gso_partial_features = NETIF_F_GSO_ESP; netdev_features_t vlan_features = BOND_VLAN_FEATURES; netdev_features_t enc_features = BOND_ENC_FEATURES;
#ifdef CONFIG_XFRM_OFFLOAD @@ -1582,8 +1585,9 @@ static void bond_compute_features(struct bonding *bond) BOND_XFRM_FEATURES); #endif /* CONFIG_XFRM_OFFLOAD */
if (slave->dev->hw_enc_features & NETIF_F_GSO_PARTIAL)
gso_partial_features &= slave->dev->gso_partial_features;
gso_partial_features = netdev_increment_features(gso_partial_features,
slave->dev->gso_partial_features,
BOND_GSO_PARTIAL_FEATURES);
mpls_features = netdev_increment_features(mpls_features, slave->dev->mpls_features, @@ -1598,12 +1602,8 @@ static void bond_compute_features(struct bonding *bond) } bond_dev->hard_header_len = max_hard_header_len;
- if (gso_partial_features & NETIF_F_GSO_ESP)
bond_dev->gso_partial_features |= NETIF_F_GSO_ESP;
- else
bond_dev->gso_partial_features &= ~NETIF_F_GSO_ESP;
done:
- bond_dev->gso_partial_features = gso_partial_features; bond_dev->vlan_features = vlan_features; bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL | NETIF_F_HW_VLAN_CTAG_TX |
if (!bond_has_slaves(bond)) goto done;
If there is no slaves, should we add the gso_partial_features?
Thanks Hangbin
@@ -6046,6 +6046,7 @@ void bond_setup(struct net_device *bond_dev) bond_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL; bond_dev->features |= bond_dev->hw_features; bond_dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_STAG_TX;
- bond_dev->features |= NETIF_F_GSO_PARTIAL;
#ifdef CONFIG_XFRM_OFFLOAD bond_dev->hw_features |= BOND_XFRM_FEATURES; /* Only enable XFRM features if this is an active-backup config */ -- 2.45.0
On Fri, 2025-01-24 at 09:54 +0000, Hangbin Liu wrote:
On Fri, Jan 24, 2025 at 10:57:44AM +0200, Cosmin Ratiu wrote:
drivers/net/bonding/bond_main.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7b78c2bada81..e45bba240cbc 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1538,17 +1538,20 @@ static netdev_features_t bond_fix_features(struct net_device *dev, NETIF_F_HIGHDMA | NETIF_F_LRO) #define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
NETIF_F_RXCSUM |
NETIF_F_GSO_SOFTWARE)
NETIF_F_RXCSUM |
NETIF_F_GSO_SOFTWARE | \
NETIF_F_GSO_PARTIAL)
#define BOND_MPLS_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ NETIF_F_GSO_SOFTWARE) +#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP)
static void bond_compute_features(struct bonding *bond) {
- netdev_features_t gso_partial_features =
BOND_GSO_PARTIAL_FEATURES; unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM;
- netdev_features_t gso_partial_features = NETIF_F_GSO_ESP;
netdev_features_t vlan_features = BOND_VLAN_FEATURES; netdev_features_t enc_features = BOND_ENC_FEATURES; #ifdef CONFIG_XFRM_OFFLOAD @@ -1582,8 +1585,9 @@ static void bond_compute_features(struct bonding *bond) BOND_XFRM_FEATURES); #endif /* CONFIG_XFRM_OFFLOAD */
if (slave->dev->hw_enc_features &
NETIF_F_GSO_PARTIAL)
gso_partial_features &= slave->dev-
gso_partial_features;
gso_partial_features =
netdev_increment_features(gso_partial_features,
slave->dev->gso_partial_features,
BOND_GSO_PARTIAL_FEATURES); mpls_features = netdev_increment_features(mpls_features, slave-
dev->mpls_features,
@@ -1598,12 +1602,8 @@ static void bond_compute_features(struct bonding *bond) } bond_dev->hard_header_len = max_hard_header_len;
- if (gso_partial_features & NETIF_F_GSO_ESP)
bond_dev->gso_partial_features |= NETIF_F_GSO_ESP;
- else
bond_dev->gso_partial_features &=
~NETIF_F_GSO_ESP;
done:
- bond_dev->gso_partial_features = gso_partial_features;
bond_dev->vlan_features = vlan_features; bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL | NETIF_F_HW_VLAN_CTAG_TX |
if (!bond_has_slaves(bond)) goto done;
If there is no slaves, should we add the gso_partial_features?
The other partial feature sets are added after 'done:', why not do the same for gso_partial_features for consistency? 'gso_partial_features' is otherwise not set anywhere else and relies on it being set to zero when allocated in alloc_netdev_mqs. I think it's better for it to be explicitly initialized in all cases here, like the other feature sets.
Cosmin.
On Fri, Jan 24, 2025 at 10:35:40AM +0000, Cosmin Ratiu wrote:
On Fri, 2025-01-24 at 09:54 +0000, Hangbin Liu wrote:
On Fri, Jan 24, 2025 at 10:57:44AM +0200, Cosmin Ratiu wrote:
drivers/net/bonding/bond_main.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 7b78c2bada81..e45bba240cbc 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1538,17 +1538,20 @@ static netdev_features_t bond_fix_features(struct net_device *dev, NETIF_F_HIGHDMA | NETIF_F_LRO) #define BOND_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
NETIF_F_RXCSUM |
NETIF_F_GSO_SOFTWARE)
NETIF_F_RXCSUM |
NETIF_F_GSO_SOFTWARE | \
NETIF_F_GSO_PARTIAL)
#define BOND_MPLS_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \ NETIF_F_GSO_SOFTWARE) +#define BOND_GSO_PARTIAL_FEATURES (NETIF_F_GSO_ESP)
static void bond_compute_features(struct bonding *bond) {
- netdev_features_t gso_partial_features =
BOND_GSO_PARTIAL_FEATURES; unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM;
- netdev_features_t gso_partial_features = NETIF_F_GSO_ESP;
netdev_features_t vlan_features = BOND_VLAN_FEATURES; netdev_features_t enc_features = BOND_ENC_FEATURES; #ifdef CONFIG_XFRM_OFFLOAD @@ -1582,8 +1585,9 @@ static void bond_compute_features(struct bonding *bond) BOND_XFRM_FEATURES); #endif /* CONFIG_XFRM_OFFLOAD */
if (slave->dev->hw_enc_features &
NETIF_F_GSO_PARTIAL)
gso_partial_features &= slave->dev-
gso_partial_features;
gso_partial_features =
netdev_increment_features(gso_partial_features,
slave->dev->gso_partial_features,
BOND_GSO_PARTIAL_FEATURES); mpls_features = netdev_increment_features(mpls_features, slave-
dev->mpls_features,
@@ -1598,12 +1602,8 @@ static void bond_compute_features(struct bonding *bond) } bond_dev->hard_header_len = max_hard_header_len;
- if (gso_partial_features & NETIF_F_GSO_ESP)
bond_dev->gso_partial_features |= NETIF_F_GSO_ESP;
- else
bond_dev->gso_partial_features &=
~NETIF_F_GSO_ESP;
done:
- bond_dev->gso_partial_features = gso_partial_features;
bond_dev->vlan_features = vlan_features; bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL | NETIF_F_HW_VLAN_CTAG_TX |
if (!bond_has_slaves(bond)) goto done;
If there is no slaves, should we add the gso_partial_features?
The other partial feature sets are added after 'done:', why not do the same for gso_partial_features for consistency? 'gso_partial_features' is otherwise not set anywhere else and relies on it being set to zero when allocated in alloc_netdev_mqs. I think it's better for it to be explicitly initialized in all cases here, like the other feature sets.
Cosmin.
OK.
Reviewed-by: Hangbin Liu liuhangbin@gmail.com
linux-kselftest-mirror@lists.linaro.org