Test basic (port-default, VLAN PCP and IP DSCP) QoS classification for Ocelot switches. Advanced QoS classification using tc filters is covered by tc_flower_chains.sh in the same directory.

Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com --- .../selftests/drivers/net/ocelot/basic_qos.sh | 253 ++++++++++++++++++ 1 file changed, 253 insertions(+) create mode 100755 tools/testing/selftests/drivers/net/ocelot/basic_qos.sh

diff --git a/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh new file mode 100755 index 000000000000..c51c83421c61 --- /dev/null +++ b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh @@ -0,0 +1,253 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright 2022 NXP + +# The script is mostly generic, with the exception of the +# ethtool per-TC counter names ("rx_green_prio_${tc}") + +WAIT_TIME=1 +NUM_NETIFS=4 +STABLE_MAC_ADDRS=yes +NETIF_CREATE=no +lib_dir=$(dirname $0)/../../../net/forwarding +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +require_command dcb + +h1=${NETIFS[p1]} +swp1=${NETIFS[p2]} +swp2=${NETIFS[p3]} +h2=${NETIFS[p4]} + +H1_IPV4="192.0.2.1" +H2_IPV4="192.0.2.2" +H1_IPV6="2001:db8:1::1" +H2_IPV6="2001:db8:1::2" + +h1_create() +{ + simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h1_destroy() +{ + simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64 +} + +h2_create() +{ + simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h2_destroy() +{ + simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64 +} + +h1_vlan_create() +{ + local vid=$1 + + vlan_create $h1 $vid + simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64 + ip link set $h1.$vid type vlan \ + egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ + ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +h1_vlan_destroy() +{ + local vid=$1 + + simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64 + vlan_destroy $h1 $vid +} + +h2_vlan_create() +{ + local vid=$1 + + vlan_create $h2 $vid + simple_if_init $h2.$vid $H2_IPV4/24 $H2_IPV6/64 + ip link set $h2.$vid type vlan \ + egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \ + ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 +} + +h2_vlan_destroy() +{ + local vid=$1 + + simple_if_fini $h2.$vid $H2_IPV4/24 $H2_IPV6/64 + vlan_destroy $h2 $vid +} + +vlans_prepare() +{ + h1_vlan_create 100 + h2_vlan_create 100 + + tc qdisc add dev ${h1}.100 clsact + tc filter add dev ${h1}.100 egress protocol ipv4 \ + flower ip_proto icmp action skbedit priority 3 + tc filter add dev ${h1}.100 egress protocol ipv6 \ + flower ip_proto icmpv6 action skbedit priority 3 +} + +vlans_destroy() +{ + tc qdisc del dev ${h1}.100 clsact + + h1_vlan_destroy 100 + h2_vlan_destroy 100 +} + +switch_create() +{ + ip link set ${swp1} up + ip link set ${swp2} up + + # Ports should trust VLAN PCP even with vlan_filtering=0 + ip link add br0 type bridge + ip link set ${swp1} master br0 + ip link set ${swp2} master br0 + ip link set br0 up +} + +switch_destroy() +{ + ip link del br0 +} + +setup_prepare() +{ + vrf_prepare + + h1_create + h2_create + switch_create +} + +cleanup() +{ + pre_cleanup + + h2_destroy + h1_destroy + switch_destroy + + vrf_cleanup +} + +dscp_cs_to_tos() +{ + local dscp_cs=$1 + + # https://datatracker.ietf.org/doc/html/rfc2474 + # 4.2.2.1 The Class Selector Codepoints + echo $((${dscp_cs} << 5)) +} + +run_test() +{ + local test_name=$1; shift + local if_name=$1; shift + local tc=$1; shift + local tos=$1; shift + local counter_name="rx_green_prio_${tc}" + local ipv4_before + local ipv4_after + local ipv6_before + local ipv6_after + + ipv4_before=$(ethtool_stats_get ${swp1} "${counter_name}") + ping_do ${if_name} $H2_IPV4 "-Q ${tos}" + ipv4_after=$(ethtool_stats_get ${swp1} "${counter_name}") + + if [ $((${ipv4_after} - ${ipv4_before})) -lt ${PING_COUNT} ]; then + RET=1 + else + RET=0 + fi + log_test "IPv4 ${test_name}" + + ipv6_before=$(ethtool_stats_get ${swp1} "${counter_name}") + ping_do ${if_name} $H2_IPV6 "-Q ${tos}" + ipv6_after=$(ethtool_stats_get ${swp1} "${counter_name}") + + if [ $((${ipv6_after} - ${ipv6_before})) -lt ${PING_COUNT} ]; then + RET=1 + else + RET=0 + fi + log_test "IPv6 ${test_name}" +} + +port_default_prio_get() +{ + local if_name=$1 + local prio + + prio="$(dcb -j app show dev ${if_name} default-prio | \ + jq '.default_prio[]')" + if [ -z "${prio}" ]; then + prio=0 + fi + + echo ${prio} +} + +test_port_default() +{ + local orig=$(port_default_prio_get ${swp1}) + local dmac=$(mac_get ${h2}) + + dcb app replace dev ${swp1} default-prio 5 + + run_test "Port-default QoS classification" ${h1} 5 0 + + dcb app replace dev ${swp1} default-prio ${orig} +} + +test_vlan_pcp() +{ + vlans_prepare + + run_test "Trusted VLAN PCP QoS classification" ${h1}.100 3 0 + + vlans_destroy +} + +test_ip_dscp() +{ + local port_default=$(port_default_prio_get ${swp1}) + local tos=$(dscp_cs_to_tos 4) + + dcb app add dev ${swp1} dscp-prio CS4:4 + run_test "Trusted DSCP QoS classification" ${h1} 4 ${tos} + dcb app del dev ${swp1} dscp-prio CS4:4 + + vlans_prepare + run_test "Untrusted DSCP QoS classification follows VLAN PCP" \ + ${h1}.100 3 ${tos} + vlans_destroy + + run_test "Untrusted DSCP QoS classification follows port default" \ + ${h1} ${port_default} ${tos} +} + +trap cleanup EXIT + +ALL_TESTS=" + test_port_default + test_vlan_pcp + test_ip_dscp +" + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS