This small series includes fixes for creation of veth pairs for networkless kernels & adds tests for turning the different network interface features on and off in selftests/net/netdevice.sh script.
Changes in v6: Use XFAIL for ethtool operations that are unsupported instead of SKIP.
Changes in v5: https://lore.kernel.org/all/20240808122452.25683-1-jain.abhinav177@gmail.com...
Rectify the syntax for ip add link. Fix the veth_created condition check.
Changes in v4: https://lore.kernel.org/all/20240807175717.7775-1-jain.abhinav177@gmail.com/
Move veth creation/removal to the main shell script. Tested using vng on a networkless kernel and the script works, sample output below the changes.
Changes in v3: https://lore.kernel.org/all/20240614113240.41550-1-jain.abhinav177@gmail.com...
Add a check for netdev, create veth pair for testing. Restore feature to its initial state.
Changes in v2: https://lore.kernel.org/all/20240609132124.51683-1-jain.abhinav177@gmail.com...
Remove tail usage; use read to parse the features from temp file.
v1: https://lore.kernel.org/all/20240606212714.27472-1-jain.abhinav177@gmail.com...
``` # selftests: net: netdevice.sh # No valid network device found, creating veth pair # PASS: veth0: set interface up # PASS: veth0: set MAC address # SKIP: veth0: set IP address # PASS: veth0: ethtool list features # PASS: veth0: Turned off feature: rx-checksumming # PASS: veth0: Turned on feature: rx-checksumming # PASS: veth0: Restore feature rx-checksumming to initial state on # Actual changes:
# PASS: veth0: Restore feature rx-gro-list to initial state off # PASS: veth0: Turned off feature: rx-udp-gro-forwarding # PASS: veth0: Turned on feature: rx-udp-gro-forwarding # PASS: veth0: Restore feature rx-udp-gro-forwarding to initial state off # Cannot get register dump: Operation not supported # XFAIL: veth0: ethtool dump not supported # PASS: veth0: ethtool stats # PASS: veth0: stop interface ```
Abhinav Jain (2): selftests: net: Create veth pair for testing in networkless kernel selftests: net: Add on/off checks for non-fixed features of interface
tools/testing/selftests/net/netdevice.sh | 55 +++++++++++++++++++++++- 1 file changed, 53 insertions(+), 2 deletions(-)
-- 2.34.1
Check if the netdev list is empty and create veth pair to be used for feature on/off testing. Remove the veth pair after testing is complete.
Signed-off-by: Abhinav Jain jain.abhinav177@gmail.com --- tools/testing/selftests/net/netdevice.sh | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/tools/testing/selftests/net/netdevice.sh b/tools/testing/selftests/net/netdevice.sh index e3afcb424710..0c32950fdd17 100755 --- a/tools/testing/selftests/net/netdevice.sh +++ b/tools/testing/selftests/net/netdevice.sh @@ -129,6 +129,7 @@ kci_netdev_ethtool()
kci_netdev_ethtool_test 74 'dump' "ethtool -d $netdev" kci_netdev_ethtool_test 94 'stats' "ethtool -S $netdev" + return 0 }
@@ -196,10 +197,25 @@ if [ ! -e "$TMP_LIST_NETDEV" ];then fi
ip link show |grep '^[0-9]' | grep -oE '[[:space:]].*eth[0-9]*:|[[:space:]].*enp[0-9]s[0-9]:' | cut -d\ -f2 | cut -d: -f1> "$TMP_LIST_NETDEV" + +if [ ! -s "$TMP_LIST_NETDEV" ]; then + echo "No valid network device found, creating veth pair" + ip link add veth0 type veth peer name veth1 + echo "veth0" > "$TMP_LIST_NETDEV" + echo "veth1" >> "$TMP_LIST_NETDEV" + veth_created=1 +fi + while read netdev do kci_test_netdev "$netdev" done < "$TMP_LIST_NETDEV"
+#clean up veth interface pair if it was created +if [ "$veth_created" ]; then + ip link delete veth0 + echo "Removed veth pair" +fi + rm "$TMP_LIST_NETDEV" exit 0
Implement on/off testing for all non-fixed features via while loop. Save the initial state so that it can be restored after on/off checks. Use XFAIL for unsupported ethtool API.
Signed-off-by: Abhinav Jain jain.abhinav177@gmail.com --- tools/testing/selftests/net/netdevice.sh | 39 ++++++++++++++++++++++-- 1 file changed, 37 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/netdevice.sh b/tools/testing/selftests/net/netdevice.sh index 0c32950fdd17..1c9c7c358ee6 100755 --- a/tools/testing/selftests/net/netdevice.sh +++ b/tools/testing/selftests/net/netdevice.sh @@ -86,7 +86,7 @@ kci_netdev_ethtool_test() ret=$? if [ $ret -ne 0 ];then if [ $ret -eq "$1" ];then - echo "SKIP: $netdev: ethtool $2 not supported" + echo "XFAIL: $netdev: ethtool $2 not supported" return $ksft_skip else echo "FAIL: $netdev: ethtool $2" @@ -124,7 +124,42 @@ kci_netdev_ethtool() return 1 fi echo "PASS: $netdev: ethtool list features" - #TODO for each non fixed features, try to turn them on/off + + while read -r FEATURE VALUE FIXED; do + [ "$FEATURE" != "Features" ] || continue # Skip "Features" + [ "$FIXED" != "[fixed]" ] || continue # Skip fixed features + feature="${FEATURE%:*}" + + initial_state=$(ethtool -k "$netdev" | grep "$feature:" \ + | awk '{print $2}') + ethtool --offload "$netdev" "$feature" off + if [ $? -eq 0 ]; then + echo "PASS: $netdev: Turned off feature: $feature" + else + echo "FAIL: $netdev: Failed to turn off feature:" \ + "$feature" + fi + + ethtool --offload "$netdev" "$feature" on + if [ $? -eq 0 ]; then + echo "PASS: $netdev: Turned on feature: $feature" + else + echo "FAIL: $netdev: Failed to turn on feature:" \ + "$feature" + fi + + #restore the feature to its initial state + ethtool --offload "$netdev" "$feature" "$initial_state" + if [ $? -eq 0 ]; then + echo "PASS: $netdev: Restore feature $feature" \ + "to initial state $initial_state" + else + echo "FAIL: $netdev: Failed to restore feature" \ + "$feature to default $initial_state" + fi + + done < "$TMP_ETHTOOL_FEATURES" + rm "$TMP_ETHTOOL_FEATURES"
kci_netdev_ethtool_test 74 'dump' "ethtool -d $netdev"
On Wed, 14 Aug 2024 19:15:15 +0000 Abhinav Jain wrote:
Changes in v6: Use XFAIL for ethtool operations that are unsupported instead of SKIP.
One more:
tools/testing/selftests/net/netdevice.sh: echo "SKIP: $netdev: set IP address"
I think the SKIP -> XFAIL conversion should be a separate patch (for total of 3 patches in the series).
On Wed, 14 Aug 2024 17:56:51 -0700 Jakub Kicinski wrote:
On Wed, 14 Aug 2024 19:15:15 +0000 Abhinav Jain wrote:
Changes in v6: Use XFAIL for ethtool operations that are unsupported instead of SKIP.
One more:
tools/testing/selftests/net/netdevice.sh: echo "SKIP: $netdev: set IP address"
I think the SKIP -> XFAIL conversion should be a separate patch (for total of 3 patches in the series).
P.S. and please change the subject to [PATCH net-next], it's a net-next change, not a net fix.
On Wed, 14 Aug 2024 17:57:48 -0700, Jakub Kicinski wrote:
On Wed, 14 Aug 2024 17:56:51 -0700 Jakub Kicinski wrote:
On Wed, 14 Aug 2024 19:15:15 +0000 Abhinav Jain wrote:
Changes in v6: Use XFAIL for ethtool operations that are unsupported instead of SKIP.
One more:
tools/testing/selftests/net/netdevice.sh: echo "SKIP: $netdev: set IP address"
I think the SKIP -> XFAIL conversion should be a separate patch (for total of 3 patches in the series).
P.S. and please change the subject to [PATCH net-next], it's a net-next change, not a net fix.
I have sent v7 now with net-next instead of net: https://lore.kernel.org/all/20240815105924.1389290-1-jain.abhinav177@gmail.c...
For set IP address part, I have added logic to XFAIL if veth pair was created and to SKIP if that's not the case in third patch of the series as directed above.
Right now, there is no logic to set IP address in the script for normal interfaces either and it is a TODO as well. I will focus on it next after this one is applied.
Thank you for all the help Jakub.
On Thu, 15 Aug 2024 16:34:42 +0530 Abhinav Jain wrote:
One more:
tools/testing/selftests/net/netdevice.sh: echo "SKIP: $netdev: set IP address"
I think the SKIP -> XFAIL conversion should be a separate patch (for total of 3 patches in the series).
P.S. and please change the subject to [PATCH net-next], it's a net-next change, not a net fix.
I have sent v7 now with net-next instead of net: https://lore.kernel.org/all/20240815105924.1389290-1-jain.abhinav177@gmail.c...
For set IP address part, I have added logic to XFAIL if veth pair was created and to SKIP if that's not the case in third patch of the series as directed above.
Right now, there is no logic to set IP address in the script for normal interfaces either and it is a TODO as well. I will focus on it next after this one is applied.
Minor note, please keep your guidance on frequency of reposting in mind: https://www.kernel.org/doc/html/next/process/maintainer-netdev.html
linux-kselftest-mirror@lists.linaro.org
-
Abhinav Jain -
Jakub Kicinski